A53106 SERIES DC-TO-DC CONVERTER

Size: px
Start display at page:

Download "A53106 SERIES DC-TO-DC CONVERTER"

Transcription

1 INSTALLATION & MAINTENANCE A53106 SERIES DC-TO-DC CONVERTER AUGUST 2011, REVISED AUGUST 2014 DOCUMENT NO. COM VERSION C.1 Siemens Industry, Inc., Rail Automation 9568 Archibald Ave., Suite 100, Rancho Cucamonga, California Copyright 2014 Siemens Industry, Inc., Rail Automation All rights reserved PRINTED IN U.S.A.

2 PROPRIETARY INFORMATION Siemens Industry, Inc., Rail Automation (Siemens) has a proprietary interest in the information contained herein and, in some instances, has patent rights in the systems and components described. It is requested that you distribute this information only to those responsible people within your organization who have an official interest. This document, or the information disclosed herein, shall not be reproduced or transferred to other documents or used or disclosed for manufacturing or for any other purpose except as specifically authorized in writing by Siemens. TRANSLATIONS The manuals and product information of Siemens are intended to be produced and read in English. Any translation of the manuals and product information are unofficial and can be imprecise and inaccurate in whole or in part. Siemens does not warrant the accuracy, reliability, or timeliness of any information contained in any translation of manual or product information from its original official released version in English and shall not be liable for any losses caused by such reliance on the accuracy, reliability, or timeliness of such information. Any person or entity who relies on translated information does so at his or her own risk. WARRANTY INFORMATION Siemens Industry, Inc., Rail Automation warranty policy is as stated in the current Terms and Conditions of Sale document. Warranty adjustments will not be allowed for products or components which have been subjected to abuse, alteration, improper handling or installation, or which have not been operated in accordance with Seller's instructions. Alteration or removal of any serial number or identification mark voids the warranty. SALES AND SERVICE LOCATIONS Technical assistance and sales information on Siemens Industry, Inc., Rail Automation products may be obtained at the following locations: Siemens Industry, Inc., Rail Automation Siemens Industry, Inc., Rail Automation 2400 NELSON MILLER PARKWAY 939 S. MAIN STREET LOUISVILLE, KENTUCKY MARION, KENTUCKY TELEPHONE: (502) TELEPHONE: (270) FAX: (502) CUSTOMER SERVICE: (800) SALES & SERVICE: (800) TECHNICAL SUPPORT: (800) WEB SITE: FAX: (270) FCC RULES COMPLIANCE The equipment covered in this manual has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. ii

3 DOCUMENT HISTORY Version Release Sections Details of Change Date Changed A 11/16/2004 Initial release A.1 10/31/ Pages 1-1, 1-2: Changed Input to Output isolation to 2000 VRMS. B 12/17/ Page 1-2: Clarified and expanded specifications, expanded operating/storage temperature range. Page 2-1: Changed input current to 14.0 amps for -04 version, stipulated that converter must be connected to battery source and not the battery charger. Page 2-3: Added part number for Safetran primary arrester Page 2-4: Added Cycle converter input circuit breaker to Loss of input causes. Page 2-4: Added Over temperature condition to Loss of output causes C Aug Update front material Page 1-1: list all five A53106 models, Replace Figure 1-1 Page 1-2: Replace specifications table Page 2-1: add grounding options, add Figure 2-1, add Warning Page 2-2: add all models to minimum voltage information, add Warning Page 2-3: Replace Figure 2-2 Page 2-4: Add Caution C.1 August 2014 all Siemens rebranding iii

4 NOTES, CAUTIONS, AND WARNINGS Throughout this manual, notes, cautions, and warnings are frequently used to direct the reader s attention to specific information. Use of the three terms is defined as follows: WARNING INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY. WARNINGS ALWAYS TAKE PRECEDENCE OVER NOTES, CAUTIONS, AND ALL OTHER INFORMATION. CAUTION REFERS TO PROPER PROCEDURES OR PRACTICES WHICH IF NOT STRICTLY OBSERVED, COULD RESULT IN A POTENTIALLY HAZARDOUS SITUATION AND/OR POSSIBLE DAMAGE TO EQUIPMENT. CAUTIONS TAKE PRECEDENCE OVER NOTES AND ALL OTHER INFORMATION, EXCEPT WARNINGS. NOTE Generally used to highlight certain information relating to the topic under discussion. If there are any questions, contact Siemens Industry Inc., Rail Automation Application Engineering. iv

5 ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS Static electricity can damage electronic circuitry, particularly low voltage components such as the integrated circuits commonly used throughout the electronics industry. Therefore, procedures have been adopted industry-wide which make it possible to avoid the sometimes invisible damage caused by electrostatic discharge (ESD) during the handling, shipping, and storage of electronic modules and components. Siemens Industry, Inc., Rail Automation has instituted these practices at its manufacturing facility and encourages its customers to adopt them as well to lessen the likelihood of equipment damage in the field due to ESD. Some of the basic protective practices include the following: Ground yourself before touching card cages, assemblies, modules, or components. Remove power from card cages and assemblies before removing or installing modules. Remove circuit boards (modules) from card cages by the ejector lever only. If an ejector lever is not provided, grasp the edge of the circuit board but avoid touching circuit traces or components. Handle circuit boards by the edges only. Never physically touch circuit board or connector contact fingers or allow these fingers to come in contact with an insulator (e.g., plastic, rubber, etc.). When not in use, place circuit boards in approved static-shielding bags, contact fingers first. Remove circuit boards from static-shielding bags by grasping the ejector lever or the edge of the board only. Each bag should include a caution label on the outside indicating static-sensitive contents. Cover workbench surfaces used for repair of electronic equipment with static dissipative workbench matting. Use integrated circuit extractor/inserter tools designed to remove and install electrostaticsensitive integrated circuit devices such as PROM s (OK Industries, Inc., Model EX-2 Extractor and Model MOS-40 Inserter (or equivalent) are highly recommended). Utilize only anti-static cushioning material in equipment shipping and storage containers. For information concerning ESD material applications, please contact the Technical Support Staff at ESD Awareness Classes and additional ESD product information are also available through the Technical Support Staff. v

6 TABLE OF CONTENTS Section Title Page PROPRIETARY INFORMATION... ii TRANSLATIONS... ii WARRANTY INFORMATION... ii SALES AND SERVICE LOCATIONS... ii FCC RULES COMPLIANCE... ii DOCUMENT HISTORY... iii NOTES, CAUTIONS, AND WARNINGS... iv ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS... v 1.0 INTRODUCTION General Description Specifications INSTALLATION & MAINTENANCE Installation for Best Performance Grounding Installation for Converter Used with WCP Radio Installation of Converter to Track Switch Motor Battery Maintenance Troubleshooting Loss of Input Loss of Output TABLE OF FIGURES Figure No. Title Page Figure 1-1 A , A , and A DC-to-DC Converters Figure 1-2 Case Dimensions (All Models) Figure 2-1 Grounding Options Figure 2-2 A53106 Used With WCP vi

7 INTRODUCTION SECTION 1 INTRODUCTION 1.0 INTRODUCTION 1.1 GENERAL DESCRIPTION The Siemens A53106 DC to DC converters (see figure 1-1) are used in Railroad applications requiring isolated and regulated DC/DC conversion. Five converter models: The A converts 12 volts to Watts The A converts 24 volts to Watts The A converts 12 volts to Watts The A converts 24 volts to Watts The A converts 10 to 36 volts to Watts Each model provides: 2000 VRMS of Isolation from input to output. Front-end filter with Surge protection WARNING ALL CONVERTERS ARE SHIPPED WITH THE OUTPUT NEGATIVE BONDED TO CHASSIS GROUND. REFER TO SECTION FOR CHASSIS GROUND AND FLOATING GROUND OPTIONS BEFORE CONNECTING CONVERTER. Figure 1-1 A , A , and A DC-to-DC Converters 1-1

8 INTRODUCTION 1.2 SPECIFICATIONS Part Number: A A A A A Input Voltage Range: VDC VDC VDC VDC VDC** Nominal Input Voltage: 12 VDC 24 VDC 12 VDC 24 VDC 28 VDC Maximum Input Current: VDC 9 18 VDC VDC VDC VDC Output Voltage: 12.5 VDC 12.5 VDC 12.5 VDC 12.5 VDC 13.8 VDC Output 25 C 15% Duty Cycle: 150 Watts 144 Watts 75 watts 220 watts 200 Watts Maximum Continuous Current: 4.5 Amps 5.0 Amps 2.25 Amps 8.0 Amps 4.5 Amps Maximum Current 15% Duty Cycle (Pulsed): 12 Amps 10 Amps 6 Amps 17 Amps 14 Amps Max Intermittent Peak Output (Pulsed): 15% above rated output (pulsed) 15% above rated output (pulsed) 15% above rated output (pulsed) 15% above rated output (pulsed) 15% above rated output (pulsed) Output Ripple P-P Typical 360 mv Typical 360 mv Typical 370 mv Typical 360 mv Typical 220 mv Efficiency: Up to 90% Up to 90% Up to 90% Up to 90% Up to 85% Isolation Input to Output: 2000V RMS 2000V RMS 2000V RMS 2000V RMS 2000V RMS Temperature (Operating): -40 to +160 F -40 to +160 F (-40 to +70 C) (-40 to +70 C) Temperature (Storage): -40 to +185 F -40 to +185 F (-40 to +85 C) (-40 to +85 C) -40 to +160 F (-40 to +70 C) -40 to +185 F (-40 to +85 C) -40 to +160 F (-40 to +70 C) -40 to +185 F (-40 to +85 C) -40 to +160 F (-40 to +70 C) -40 to +185 F (-40 to +85 C) Dimensions: See Figure 1-2 See Figure 1-2 See Figure 1-2 See Figure 1-2 See Figure 1-2 ** 9-36 VDC input is available with output power reduced to 75% (150 Watts). 1-2

9 INTRODUCTION R101904_ Figure 1-2 Case Dimensions (All Models) 1-3

10 INTRODUCTION This Page Intentionally Left Blank 1-4

11 INSTALLATION & MAINTENANCE SECTION 2 INSTALLATION 2.0 INSTALLATION & MAINTENANCE 2.1 INSTALLATION FOR BEST PERFORMANCE The A53106 DC to DC converter may be either rack or wall mounted. For each application, the A53106 must be installed with attention to the size and length of the input feed wire. The input wire should be as short as practical. AWG 6 or double AWG 10 size wire is recommended for most applications Grounding The A53106 DC-to-DC Converters have a chassis ground or floating ground option. Units are shipped with the chassis ground connected. If floating ground is required (e.g. powering signals) remove the left cover to expose the circuit board and switch the chassis ground from J1 to J2. The negative will now be floating in reference to the chassis and earth ground. Figure 2-1 shows the ground connections. Chassis Ground Floating Ground Figure 2-1 Grounding Options 2-1

12 INSTALLATION & MAINTENANCE WARNING ALL CONVERTERS ARE SHIPPED WITH THE OUTPUT NEGATIVE BONDED TO CHASSIS GROUND. IF POWERING SIGNALS, A FLOATING GROUND MAY BE REQUIRED. VERIFY THE TYPE OF GROUND REQUIRED PER RAILROAD AND/OR AGENCY DRAWINGS AND PROCEDURES BEFORE CONNECTING THE DC TO DC CONVERTER TO THE SYSTEM Installation for Converter Used with WCP Radio The 30-Watt A53412 radio draws approximately 11 Amps while transmitting. To insure that the radio will transmit properly at all battery levels the following cabling requirements must be followed. The recommended feed wire size (AWG 6 or double AWG 10) is used to prevent excessive voltage drop between the battery and the A53106 input, i.e., to produce the lowest voltage drop across the feed wire when the A53106 DC/DC Converter is pulling maximum current at the minimum input voltage level. Minimum input voltage levels: A or V to 12.5V converter Amps A or V to 12.5V converter Amps A V to 13.8 converter Amps The recommended feed wire size is used between the A53106 and the battery. The feed wire can be terminated at the DCV Bus Bar (see Figure 2-2) on the Wall of the house, as long as: 1. It's the shortest route 2. AWG #6 or double AWG #10 is used on both sides of the Bus Bar. 3. Converter is to be connected to the battery source, not at the charger. Proper wire size insures that the DC to DC converter input voltage will remain above the required minimum voltage when the charger is down and the unit is running solely off the battery. Proper wire size also minimizes the feed-wire voltage drop that may drop the input voltage below the minimum level as output current increases. 2-2

13 INSTALLATION & MAINTENANCE Figure 2-2 A53106 Used With WCP 2-3

14 INSTALLATION & MAINTENANCE Installation of Converter to Track Switch Motor Battery The A53106 can run directly from the same Signal battery that powers the Switch Motor, as long as: 1. The AWG #6 input wire to the A53106 is connected directly to the Battery via a Clearview Primary Surge Arrester, Siemens Part Number X 2. The input wire is not routed via the Wall Bus strip 3. When the proper feed wire size and routing is observed the battery will provide enough current for both the Radio and the Switch motor. 4. The A53106 will: a. Provide the power required by Radio to Transmit at full power, even while a Track Switch move is in progress b. Supply the current without the surge causing a drop at the A53106 input below minimum input level CAUTION A SURGE VOLTAGE DROP WILL CAUSE THE A53106 TO RESET, AND THUS CAUSE AN INTERRUPTION OF DC POWER TO THE RADIO. NOTE The use of incorrect feed wire size, length, or routing may cause the current drawn by the Radio and/or the Switch Motor to drop the A53106 input voltage below the minimum operating level. 2.2 MAINTENANCE No routine or preventive maintenance is necessary to the converter. 2.3 TROUBLESHOOTING In general, any trouble encountered with the unit will result from low output, or no output. The steps outlined below provide a general guideline for isolating the cause of trouble. 2-4

15 INSTALLATION & MAINTENANCE Loss of Input Loss of converter input may result from: Defective battery. Check battery voltages under load conditions. Loose connection. Check wiring and terminations. Defective wiring or component(s) between the battery and the converter input. Replace or repair wiring and/or component(s). Tripped input circuit breaker. Check circuit breakers and reset as required Loss of Output Loss of output may result from: Tripped front-panel circuit breaker. Check circuit breakers and reset as required. Input voltage is below minimum input-voltage level (see paragraph 2.1.2). Check battery voltages under load conditions. Replace or repair as required. Check wiring as described in paragraphs and Repair as required. Excessive output load. Remove the loads and measure the no-load voltage output. If the no-load output voltage is consistent with the specification, connect each load through an arrester to see if the drain is excessive. If a load fault is indicated, the condition should be corrected. Over temperature condition. 2-5

16 Siemens Industry, Inc., Rail Automation 2400 Nelson Miller Parkway Louisville, Kentucky (502) Siemens Industry, Inc., Rail Automation California R&D Division 9568 Archibald Ave., Suite 100 Rancho Cucamonga, California (909)

SE HZ STEADY ENERGY PHASE SELECTIVE TRACK CIRCUIT

SE HZ STEADY ENERGY PHASE SELECTIVE TRACK CIRCUIT INSTRUCTION & MAINTENANCE SE-3 100 HZ STEADY ENERGY PHASE SELECTIVE TRACK CIRCUIT APRIL 2013 (REVISED APRIL 2014) DOCUMENT NO. SIG-00-00-13 VERSION C.2 Siemens Industry, Inc. Rail Automation 9568 Archibald

More information

SE-3 60 HZ STEADY ENERGY PHASE SELECTIVE TRACK CIRCUIT

SE-3 60 HZ STEADY ENERGY PHASE SELECTIVE TRACK CIRCUIT INSTRUCTION & MAINTENANCE SE-3 60 HZ STEADY ENERGY PHASE SELECTIVE TRACK CIRCUIT APRIL 2013, REVISED APRIL 2014 DOCUMENT NO. SIG-00-03-04 VERSION C.2 Siemens Industry, Inc., Rail Automation 9568 Archibald

More information

$50.00 PHASE SHIFT OVERLAY III (PSO III) INSTALLATION & INSTRUCTION. September 2002, Revised September 2014 DOCUMENT NO. SIG VERSION A

$50.00 PHASE SHIFT OVERLAY III (PSO III) INSTALLATION & INSTRUCTION. September 2002, Revised September 2014 DOCUMENT NO. SIG VERSION A $50.00 INSTALLATION & INSTRUCTION PHASE SHIFT OVERLAY III (PSO III) September 2002, Revised September 2014 DOCUMENT NO. SIG-00-00-19 VERSION A Siemens Industry, Inc., Rail Automation 9568 Archibald Ave.,

More information

MICROPROCESSOR BASED MODEL 3000 GRADE CROSSING PREDICTOR FAMILY

MICROPROCESSOR BASED MODEL 3000 GRADE CROSSING PREDICTOR FAMILY APPLICATION GUIDELINES MICROPROCESSOR BASED MODEL 3000 GRADE CROSSING PREDICTOR FAMILY APRIL 2009, REVISED SEPTEMBER 2014 DOCUMENT NO. S-00-93-01 VERSION D2 Siemens Industry, Inc., Rail Automation 9568

More information

41P Portable Calibrator User Manual

41P Portable Calibrator User Manual Trig-Tek 41P Portable Calibrator User Manual Publication No. 980961 Rev. A Astronics Test Systems Inc. 4 Goodyear, Irvine, CA 92618 Tel: (800) 722-2528, (949) 859-8999; Fax: (949) 859-7139 atsinfo@astronics.com

More information

200B Clipper Module User Manual

200B Clipper Module User Manual Trig-Tek 200B Clipper Module User Manual Publication No. 980954 Rev. A Astronics Test Systems Inc. 4 Goodyear, Irvine, CA 92618 Tel: (800) 722-2528, (949) 859-8999; Fax: (949) 859-7139 atsinfo@astronics.com

More information

2-Slot Desktop Chassis (DC) Extended Temperature

2-Slot Desktop Chassis (DC) Extended Temperature APRIL 2008 LMC5202A 2-Slot Desktop Chassis (DC) Extended Temperature Copyright 2008. Black Box Corporation. All rights reserved 50 80105BB 01 A0 1000 Park Drive Lawrence, PA 35055 1018 724 746 5500 Fax

More information

GETTING STARTED GUIDE NI AI, ±60 V, 24 Bit, 1 ks/s/ch Simultaneous

GETTING STARTED GUIDE NI AI, ±60 V, 24 Bit, 1 ks/s/ch Simultaneous GETTING STARTED GUIDE NI 9228 8 AI, ±60 V, 24 Bit, 1 ks/s/ch Simultaneous This document explains how to connect to the NI 9228. Note Before you begin, complete the software and hardware installation procedures

More information

INSTRUCTION MANUAL. March 11, 2003, Revision 3

INSTRUCTION MANUAL. March 11, 2003, Revision 3 INSTRUCTION MANUAL Model 701A Stimulator March 11, 2003, Revision 3 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora, Ontario, Canada L4G 3V7 Tel: 1-905-727-5161

More information

ULT-DIN O P E R A T I N G I N S T R U C T I O N S ULTRALOOP V E HI C L E L O O P DETECTOR Johnston Parkway, Cleveland, Ohio 44128

ULT-DIN O P E R A T I N G I N S T R U C T I O N S ULTRALOOP V E HI C L E L O O P DETECTOR Johnston Parkway, Cleveland, Ohio 44128 O P E R A T I N G I N S T R U C T I O N S ULT-DIN ULTRALOOP V E HI C L E L O O P DETECTOR 4564 Johnston Parkway, Cleveland, Ohio 44128 P. 800 426 9912 F. 216 518 9884 Sales Inquiries: salessupport@emxinc.com

More information

DC200A Displacement Clipper User Manual

DC200A Displacement Clipper User Manual Trig-Tek DC200A Displacement Clipper User Manual Publication No. 980981 A Inc. 4 Goodyear, Irvine, CA 92618 Tel: (800) 722-2528, (949) 859-8999; Fax: (949) 859-7139 atsinfo@astronics.com atssales@astronics.com

More information

IS7705. Installation & Operation Manual AUDIO INTEGRATION KIT. TranzIt LINK

IS7705. Installation & Operation Manual AUDIO INTEGRATION KIT. TranzIt LINK GET CONNECTED Installation & Operation Manual AUDIO INTEGRATION KIT IS7705 Note to Readers, The information contained within the following documentation is subject to change without notice. Features discussed

More information

WEL-200 O P E R A T I N G I N S T R U C T I O N S W I R E L E S S E D G E L I N K

WEL-200 O P E R A T I N G I N S T R U C T I O N S W I R E L E S S E D G E L I N K O P E R A T I N G I N S T R U C T I O N S WEL-200 TM W I R E L E S S E D G E L I N K 4564 Johnston Parkway, Cleveland, Ohio 44128 P. 800 426 9912 F. 216 518 9884 Sales Inquiries: salessupport@emxinc.com

More information

Application Note (Revision NEW) Original Instructions. EMI Control in Electronic Governing Systems

Application Note (Revision NEW) Original Instructions. EMI Control in Electronic Governing Systems Application Note 50532 (Revision NEW) Original Instructions EMI Control in Electronic Governing Systems General Precautions Read this entire manual and all other publications pertaining to the work to

More information

201AP Charge Amplifier User Manual

201AP Charge Amplifier User Manual Trig-Tek 201AP Charge Amplifier User Manual Publication No. 980996 Rev. A Astronics Test Systems Inc. 4 Goodyear, Irvine, CA 92618 Tel: (800) 722-2528, (949) 859-8999; Fax: (949) 859-7139 atsinfo@astronics.com

More information

ULT-MVP O P E R A T I N G I N S T R U C T I O N S ULTRALOOP V E HI C L E L O O P DETECTOR Johnston Parkway, Cleveland, Ohio 44128

ULT-MVP O P E R A T I N G I N S T R U C T I O N S ULTRALOOP V E HI C L E L O O P DETECTOR Johnston Parkway, Cleveland, Ohio 44128 ULT-MVP ULTRALOOP O P E R A T I N G I N S T R U C T I O N S V E HI C L E L O O P DETECTOR 4564 Johnston Parkway, Cleveland, Ohio 44128 P. 800 426 9912 F. 216 518 9884 Sales Inquiries: salessupport@emxinc.com

More information

SCR HIGH VOLTAGE M-FRAME INTERFACE BOARD DS200SHVMG1A

SCR HIGH VOLTAGE M-FRAME INTERFACE BOARD DS200SHVMG1A (Supersedes GEI-100174) SCR HIGH VOLTAGE M-FRAME INTERFACE BOARD DS200SHVMG1A These instructions do not purport to cover all details or variations in equipment, nor to provide every possible contingency

More information

Model 113 Scintillation Preamplifier Operating and Service Manual

Model 113 Scintillation Preamplifier Operating and Service Manual Model 113 Scintillation Preamplifier Operating and Service Manual Printed in U.S.A. ORTEC Part No. 717560 1202 Manual Revision B Advanced Measurement Technology, Inc. a/k/a/ ORTEC, a subsidiary of AMETEK,

More information

DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif Fax Est.

DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif Fax Est. DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif. 95005 831-336-8891 Fax 831-336-3840 http://www.dyneng.com sales@dyneng.com Est. 1988 User Manual PIM-Parallel-IO PMC IO Module for PMC Parallel IO PIM

More information

MIRAGE BD-38-G DUAL BAND POWER AMPLIFIER

MIRAGE BD-38-G DUAL BAND POWER AMPLIFIER MIRAGE BD-38-G DUAL BAND POWER AMPLIFIER MIRAGE BD-38-G Dual Band Amplifier INTRODUCTION: The Mirage BD-38-G is a 80/60 watt dual band power amplifier for use with today's dual band handie talkies operating

More information

Model 9302 Amplifier-Discriminator Operating and Service Manual

Model 9302 Amplifier-Discriminator Operating and Service Manual Model 9302 Amplifier-Discriminator Operating and Service Manual Printed in U.S.A. ORTEC Part No. 733690 1202 Manual Revision C Advanced Measurement Technology, Inc. a/k/a/ ORTEC, a subsidiary of AMETEK,

More information

45EMD Portable Calibrator User Manual

45EMD Portable Calibrator User Manual Trig-Tek 45EMD Portable Calibrator User Manual Publication No. 980958 Rev. B Astronics Test Systems Inc. 4 Goodyear, Irvine, CA 92618 Tel: (800) 722-2528, (949) 859-8999; Fax: (949) 859-7139 atsinfo@astronics.com

More information

PHASE SHIFT OVERLAY PLUS (PSO+) (P/N 7A481 & 7A483)

PHASE SHIFT OVERLAY PLUS (PSO+) (P/N 7A481 & 7A483) INSTALLATION AND INSTRUCTION MANUAL PHASE SHIFT OVERLAY PLUS (PSO+) (P/N 7A481 & 7A483) JUNE 2012 AMENDED APRIL 2014 DOCUMENT NO. SIG-00-10-16 VERSION.1 Siemens Industry, Inc., Rail Automation 9568 Archibald

More information

NEO CAR AUDIO. Neo AUXiN AUX INPUT INTERFACE. Instruction Manual

NEO CAR AUDIO. Neo AUXiN AUX INPUT INTERFACE. Instruction Manual NEO CAR AUDIO Neo AUXiN AUX INPUT INTERFACE Instruction Manual IMPORTANT NOTE Neo AUXiN Dip switch positions MUST be set BEFORE any other step is taken. Otherwise, the kit will not operate properly. See

More information

LL-105-R LED Dimmer & 0-10V Bridge Setup Guide

LL-105-R LED Dimmer & 0-10V Bridge Setup Guide www.i2systems.com i2systems is a registered trademark of Integrated Illumination Systems, Inc. LightLink is a trademark of Integrated Illumination Systems, Inc. 2018 Integrated Illumination Systems, Inc.

More information

On-Line Cardio Theater Wireless Digital Transmitter Installation and Instruction Manual

On-Line Cardio Theater Wireless Digital Transmitter Installation and Instruction Manual On-Line Cardio Theater Wireless Digital Transmitter Installation and Instruction Manual Full installation instructions accompany your Cardio Theater equipment order. This On-Line version of our Installation/Instruction

More information

Smart-UPS On-Line Isolation and Step-Down Transformer SRT5KTF

Smart-UPS On-Line Isolation and Step-Down Transformer SRT5KTF Smart-UPS On-Line Isolation and Step-Down Transformer SRT5KTF Safety Messages Read the instructions carefully to become familiar with the equipment before attempting to install, operate, service or maintain

More information

Operation Manual. Congratulations on purchasing your high quality AIMS Power pure sine inverter!

Operation Manual. Congratulations on purchasing your high quality AIMS Power pure sine inverter! Operation Manual Congratulations on purchasing your high quality AIMS Power pure sine inverter! It is very important that you read and understand this instruction manual completely prior to use. Contained

More information

Ametek, Inc. Rotron Technical Products Division. 100 East Erie St., Suite 200 Kent, Ohio User's Guide. Number Revision F

Ametek, Inc. Rotron Technical Products Division. 100 East Erie St., Suite 200 Kent, Ohio User's Guide. Number Revision F Ametek, Inc. Rotron Technical Products Division 100 East Erie St., Suite 200 Kent, Ohio 44240 User's 120 Volt, 800 Watt and 240 Volt, 1200 Watt Brushless Motor Drive Electronics 5.7" (145 mm) and 7.2"

More information

Quick Start Guide. ELPRO 905U-L-T Wireless I/O Transmitter Unit. man_905u-l-t_quickstart_v1.9.doc

Quick Start Guide. ELPRO 905U-L-T Wireless I/O Transmitter Unit. man_905u-l-t_quickstart_v1.9.doc Quick Start Guide ELPRO 905U-L-T Wireless I/O Transmitter Unit man_905u-l-t_quickstart_v1.9.doc About this document This document is the and contains the following sections: Section Basic steps for using

More information

GETTING STARTED GUIDE NI AI, ±10 V, 24 Bit, 50 ks/s/ch Simultaneous

GETTING STARTED GUIDE NI AI, ±10 V, 24 Bit, 50 ks/s/ch Simultaneous GETTING STARTED GUIDE NI 9239 4 AI, ±10 V, 24 Bit, 50 ks/s/ch Simultaneous This document explains how to connect to the NI 9239. Note Before you begin, complete the software and hardware installation procedures

More information

Dynamo Brushless DC Motor and GreenDriveTM Manual

Dynamo Brushless DC Motor and GreenDriveTM Manual Dynamo Brushless DC Motor and GreenDriveTM Manual This manual was developed as a guide for use by FIRST Robotics Teams using Controller Part Number 840205-000 in conjunction with the Nidec Dynamo BLDC

More information

2015 RIGOL TECHNOLOGIES, INC.

2015 RIGOL TECHNOLOGIES, INC. Service Guide DG000 Series Dual-channel Function/Arbitrary Waveform Generator Oct. 205 TECHNOLOGIES, INC. Guaranty and Declaration Copyright 203 TECHNOLOGIES, INC. All Rights Reserved. Trademark Information

More information

GPNP Inc. NT384 NT1 User Manual. Revision /6/2002. Information in this guide is subject to change without notification.

GPNP Inc. NT384 NT1 User Manual. Revision /6/2002. Information in this guide is subject to change without notification. GPNP Inc. NT384 NT1 User Manual Revision 1.00 17/6/2002 Information in this guide is subject to change without notification. Copyright 2002 GPNP Inc. U.S.A. IMPORTANT SAFETY INSTRUCTIONS When using your

More information

ARBE-III Instruction Manual

ARBE-III Instruction Manual ARBE-III Instruction Manual Introduction ARBE-III is a solid state, fully regulated, universal power supply designed specifically for use of pre 1930 s battery operated radios. Three electronically isolated

More information

User Manual. ProRF Encoder Transmitter & Receiver

User Manual. ProRF Encoder Transmitter & Receiver User Manual ProRF Encoder Transmitter & Receiver WARRANTY Accurate Technology, Inc. warrants the ProScale Systems against defective parts and workmanship for 1 year commencing from the date of original

More information

8902/RE and 8902/RR Resolver Speed Feedback Options

8902/RE and 8902/RR Resolver Speed Feedback Options 8902/RE and 8902/RR Resolver Speed Feedback Options Technical Manual HA469251U002 Issue 1 Compatible with Version 2.x and 3.x Software Copyright 2009 Parker SSD Drives, a division of Parker Hannifin Ltd.

More information

Mirage B-320-G FEATURES

Mirage B-320-G FEATURES Mirage B-320-G The Mirage B-320-G is a VHF power amplifier designed for 2 meters covering 144-148 MHz. The Hi and Lo input selector switch makes this amp useable for both handheld and mobile transceivers.

More information

SSR-150xxx-40VL-12P-xC-xxxCS

SSR-150xxx-40VL-12P-xC-xxxCS HELLROARING TECHNOLOGIES, INC. P.O. BOX 1521 POLSON, MT 59860 406 883-3801 HTTP://WWW.HELLROARING.COM SUPPORT@HELLROARING.COM SSR-150xxx-40VL-12P-xC-xxxCS The SSR-150xxx-40VL-12P-xC-xxxCS is designed for

More information

High Frequency SineWave Guardian TM Filter

High Frequency SineWave Guardian TM Filter High Frequency SineWave Guardian TM Filter 380V 480V TECHNICAL REFERENCE MANUAL WARNING High Voltage! Only a qualified electrician can carry out the electrical installation of this filter. Quick Reference

More information

SSR VL-12P-xC-NCS

SSR VL-12P-xC-NCS HELLROARING TECHNOLOGIES, INC. P.O. BOX 1521 POLSON, MT 59860 406 883-3801 HTTP://WWW.HELLROARING.COM SUPPORT@HELLROARING.COM SSR-40150-200VL-12P-xC-NCS The SSR-40150-200VL-12P-xC-NCS is designed for Low

More information

99 Washington Street Melrose, MA Fax TestEquipmentDepot.com # # AAC Clamp Meter. Instruction Manual

99 Washington Street Melrose, MA Fax TestEquipmentDepot.com # # AAC Clamp Meter. Instruction Manual 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com #61-732 #61-736 400 AAC Clamp Meter Instruction Manual AC HOLD APO DC KMΩ mva WARNING Read First: Safety Information Understand

More information

Smart-UPS RT. Isolation Transformer Models: SURT001 and SURT002 Isolation and Step-Down Transformer Models: SURT003 and SURT004.

Smart-UPS RT. Isolation Transformer Models: SURT001 and SURT002 Isolation and Step-Down Transformer Models: SURT003 and SURT004. Smart-UPS RT Isolation Transformer Models: SURT001 and SURT002 Isolation and Step-Down Transformer Models: SURT003 and SURT004 User Manual 990-1673A, English, 11/2003 General Information General Information

More information

DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif Fax Est.

DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif Fax Est. DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif. 95005 831-336-8891 Fax 831-336-3840 http://www.dyneng.com sales@dyneng.com Est. 1988 User Manual PIM-Universal-IO PMC IO Module PIM w/ SCSI II Bezel

More information

Trusted 20 Channel Isolated AI/DI FTA Loop Powered

Trusted 20 Channel Isolated AI/DI FTA Loop Powered ICSTT-RM294E-EN-P (PD-T8833) Trusted Trusted 20 Channel Isolated AI/DI FTA Loop Powered Product Overview The Trusted 20 Channel Isolated Analogue Input/Digital Input (AI/DI) Field Termination Assembly

More information

Model 7000 Low Noise Differential Preamplifier

Model 7000 Low Noise Differential Preamplifier Model 7000 Low Noise Differential Preamplifier Operating Manual Service and Warranty Krohn-Hite Instruments are designed and manufactured in accordance with sound engineering practices and should give

More information

Installation and Operation Manual MSI. Multi-Sensor Interface Hub. Interface Module for all Sensors Network and Wireless CAUTION

Installation and Operation Manual MSI. Multi-Sensor Interface Hub. Interface Module for all Sensors Network and Wireless CAUTION Installation and Operation Manual MSI Multi-Sensor Interface Hub Interface Module for all Sensors Network and Wireless CAUTION This equipment complies with the limits for a Class B digital device, pursuant

More information

User's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters

User's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters User's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters Table of Contents Page Introduction 1 Description 1 Specifications 2 Installation 3 Calibration 4 General Maintenance

More information

Com-Trol ADV-6000 Trouble Shooting Guide Click on red text to go to that page in guide

Com-Trol ADV-6000 Trouble Shooting Guide Click on red text to go to that page in guide Com-Trol ADV-6000 Trouble Shooting Guide Click on red text to go to that page in guide Topic Introduction 1 Tool Requirements 1 Trouble Shooting Check List 1 Page(s) Lost communications to controller(s)

More information

MS8268 HANDHELD DIGITAL MULTIMETER OPERATOR S INSTRUCTION MANUAL

MS8268 HANDHELD DIGITAL MULTIMETER OPERATOR S INSTRUCTION MANUAL MS8268 HANDHELD DIGITAL MULTIMETER OPERATOR S INSTRUCTION MANUAL Table of Contents TITLE PAGE 1. GENERAL INSTRUCTIONS 1 1.1 Precaution safety measures 1 1.1.1 Preliminary 1 1.1.2 During use 2 1.1.3 Symbols

More information

INSTALLATION AND MAINTENANCE MANUAL FOR GROUND MONITOR GM-250 COPYRIGHT 1983 AMERICAN MINE RESEARCH, INC.

INSTALLATION AND MAINTENANCE MANUAL FOR GROUND MONITOR GM-250 COPYRIGHT 1983 AMERICAN MINE RESEARCH, INC. INSTALLATION AND MAINTENANCE MANUAL FOR GROUND MONITOR GM-250 COPYRIGHT 1983 AMERICAN MINE RESEARCH, INC. MANUAL PART NUMBER 180-0036 ORIGINAL: 1-17-83 REVISION: B (8-26-86) NOT TO BE CHANGED WITHOUT MSHA

More information

Keysight U9397A/C FET Solid State Switch (SPDT)

Keysight U9397A/C FET Solid State Switch (SPDT) Keysight U9397A/C FET Solid State Switch (SPDT) Operating and Service Manual Notices Copyright Notice Keysight Technologies 2007-2017 No part of this manual may be reproduced in any form or by any means

More information

Quick Start Guide. ELPRO 905U-L-T Wireless I/O Transmitter Unit. man_905u-l-t_quickstart_v1-7.doc

Quick Start Guide. ELPRO 905U-L-T Wireless I/O Transmitter Unit. man_905u-l-t_quickstart_v1-7.doc Quick Start Guide ELPRO 905U-L-T Wireless I/O Transmitter Unit man_905u-l-t_quickstart_v1-7.doc ELPRO 905U-L-T Wireless I/O Transmitter Unit Quick Start Guide About this document This document is the ELPRO

More information

VT1586A Rack Mount Terminal Panel Installation and User s Manual

VT1586A Rack Mount Terminal Panel Installation and User s Manual VT1586A Rack Mount Terminal Panel Installation and User s Manual Manual Part Number: 82-0095-000 Rev. June 16, 2003 Printed in U.S.A. Certification VXI Technology, Inc. certifies that this product met

More information

Installation Manual DOC R1 Date: 05/27/99. Plug-in Meter Installation Manual

Installation Manual DOC R1 Date: 05/27/99. Plug-in Meter Installation Manual Installation Manual DOC-4004-5015-R1 Date: 05/27/99 Plug-in Meter Installation Manual Document Number: Doc-4004-5015-R1 Document Release Date: 5/99 Copyright 1999 TeCom Inc. All rights reserved. No part

More information

FarmPS-1 Table of Contents

FarmPS-1 Table of Contents Copyright 2004 Grandad s Electronics Seattle, Washington, USA INSTRUCTION MANUAL Model FarmPS-1, 1.5V/90V Farm Radio Power Supply A- A+ FarmPS-1 Table of Contents Section Page Contents 1.0.............................

More information

A Channel Amplifier

A Channel Amplifier Installation Manual A2150 2 Channel Amplifier Table of Contents Installation Requirements and Recommendations 1 What s included 1 Speaker Wire Recommendations 1 Setup 2 Rack Mounting 2 Individually Protected

More information

INSTALLATION INSTRUCTIONS FOR THE CLIKCARD COMMERCIAL RECEIVER (NARROW BAND)

INSTALLATION INSTRUCTIONS FOR THE CLIKCARD COMMERCIAL RECEIVER (NARROW BAND) Doc. 6001200 Rev. B INSTALLATION INSTRUCTIONS FOR THE CLIKCARD COMMERCIAL RECEIVER (NARROW BAND) TABLE OF CONTENTS TABLE OF CONTENTS...1 INSTALLATION FOR INFINITY AND PROCARD...3 PULLING CABLE... 3 MOUNTING

More information

CP /240-MC4 User Manual

CP /240-MC4 User Manual CP-250-60-208/240-MC4 User Manual Chilicon Power LLC Jan 2014 1 CONTENTS Important Safety Instructions... 3 Safety Instructions... 3 CP-250 Microinverter System Introduction... 4 Inverter Label Information...

More information

An American Control Electronics Brand PCM4 SERIES USER MANUAL PCM4.

An American Control Electronics Brand PCM4 SERIES USER MANUAL PCM4. An American Control Electronics Brand PCM4 SERIES PCM4 USER MANUAL www.minarikdrives.com Dear Valued Consumer: Congratulations on your purchase of the PCM4 Series isolation card. This User Manual was created

More information

Model 3725/2M. Line Impedance Stabilization Network (LISN) User Manual

Model 3725/2M. Line Impedance Stabilization Network (LISN) User Manual Model 3725/2M Line Impedance Stabilization Network (LISN) User Manual ETS-Lindgren L.P. reserves the right to make changes to any product described herein in order to improve function, design, or for any

More information

IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: MODEL: Multimeter Service Information

IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: MODEL: Multimeter Service Information IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-340 MODEL: 61-342 Multimeter Service Information The Service Information provides the following information: Precautions and safety information Specifications

More information

TARGETuner Antenna Management System for Screwdriver Antennas

TARGETuner Antenna Management System for Screwdriver Antennas TARGETuner Antenna Management System for Screwdriver Antennas www.westmountainradio.com 1020 Spring City Drive Waukesha, WI 53186 262-522-6503 sales@westmountainradio.com 2014, All rights reserved. All

More information

Trusted Power Distribution Unit MCB 24 Vdc

Trusted Power Distribution Unit MCB 24 Vdc PD-T8292 Trusted Trusted Power Distribution Unit MCB 24 Vdc Product Overview The dual 5-channel Trusted Power Distribution Unit Miniature Circuit Breaker (MCB) 24 V is designed for N+1 or 100 % redundant

More information

Landis+Gyr. S4e MFMM Cellnet User Manual. Bulletin Revision A. DOCUMENT HISTORY Bulletin:

Landis+Gyr. S4e MFMM Cellnet User Manual. Bulletin Revision A. DOCUMENT HISTORY Bulletin: S4e MFMM Cellnet User Manual Bulletin 051101 Revision A Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any

More information

ANTENNA TUNER CONTROLLER MODEL ATC-550. Installation and Operating Instructions

ANTENNA TUNER CONTROLLER MODEL ATC-550. Installation and Operating Instructions ANTENNA TUNER CONTROLLER MODEL ATC-550 Installation and Operating Instructions Til Document No. 00RE269 Rev. A Issue 1 MAY 2000 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario

More information

USER'S MANUAL Revision C December 2011 THERMOCOUPLE WELDER

USER'S MANUAL Revision C December 2011 THERMOCOUPLE WELDER USER'S MANUAL 990-070 Revision C December 2011 Copyright 1990, 2002, 2007 Miyachi Unitek Corporation The engineering designs, drawings and data contained herein are the proprietary work of MIYACHI UNITEK

More information

BLD75-1. Bilevel Step Motor Driver. User s Guide. #L010125

BLD75-1. Bilevel Step Motor Driver. User s Guide.   #L010125 BLD75-1 Bilevel Step Motor Driver User s Guide A N A H E I M A U T O M A T I O N #L010125 1 Features Unipolar Operation 10 Amps per Phase Operating Current (Kick Current) 7 Amps per Phase Standstill Current

More information

PULSE DISTRIBUTION AMPLIFIER OPERATING MANUAL

PULSE DISTRIBUTION AMPLIFIER OPERATING MANUAL SPECTRADYNAMICS, INC PD5-RM-B PULSE DISTRIBUTION AMPLIFIER OPERATING MANUAL SPECTRADYNAMICS, INC 1849 Cherry St. Unit 2. Louisville, CO 80027 Phone: (303) 665-1852 Fax: (303) 604-6088 www.spectradynamics.com

More information

Wire Transmission Only with Sealing Current (4W TO W/SC) Channel Unit

Wire Transmission Only with Sealing Current (4W TO W/SC) Channel Unit Telecommunications Group Section 365 305 202 Equipment Issue 2 Second Printing, September 2000 3653 05 4-Wire Transmission Only with Sealing Current (4W TO W/SC) Channel Unit CONTENTS Complies with UL

More information

User Manual. Smart-UPS On-Line. Uninterruptible Power Supply. Isolation Transformer Models: SURT001 and SURT002

User Manual. Smart-UPS On-Line. Uninterruptible Power Supply. Isolation Transformer Models: SURT001 and SURT002 User Manual Smart-UPS On-Line Uninterruptible Power Supply Isolation Transformer Models: SURT001 and SURT002 Isolation and Step-Down Transformer Models: SURT003 and SURT004 General Information Important

More information

TLS-3A. Telephone Line Simulator. User Manual , Rev. B Covers Model TLS-3A-01

TLS-3A. Telephone Line Simulator. User Manual , Rev. B Covers Model TLS-3A-01 User Manual TLS-3A Telephone Line Simulator 40-400-00010, Rev. B Covers Model TLS-3A-01 Teltone Corporation 22121-20th Avenue SE Bothell, Washington 98021-4408 USA Phone: 1-800-426-3926 or 425-487-1515

More information

CBCT TM CIRCUIT BREAKER COIL TESTER

CBCT TM CIRCUIT BREAKER COIL TESTER CBCT TM CIRCUIT BREAKER COIL TESTER USER S MANUAL Vanguard Instruments Company, Inc. 1520 S. Hellman Ave. Ontario, California 91761, USA TEL: (909) 923-9390 FAX: (909) 923-9391 August 2010 Revision 1 SAFETY

More information

Yagi and Omni Antennas Installation Manual

Yagi and Omni Antennas Installation Manual Yagi and Omni Antennas Installation Manual 25500445 Rev. A0 0218 Printed in U.S.A. Copyright 2018 Federal Signal Corporation Limited Warranty This product is subject to and covered by a limited warranty,

More information

LCM100 USER GUIDE. Line Carrier Modem INDUSTRIAL DATA COMMUNICATIONS

LCM100 USER GUIDE. Line Carrier Modem INDUSTRIAL DATA COMMUNICATIONS USER GUIDE INDUSTRIAL DATA COMMUNICATIONS LCM100 Line Carrier Modem It is essential that all instructions contained in the User Guide are followed precisely to ensure proper operation of equipment. Product

More information

IRRIGATION 810-T PLUS TRANSMITTER GUIDE

IRRIGATION 810-T PLUS TRANSMITTER GUIDE IRRIGATION 810-T PLUS TRANSMITTER GUIDE Pg. 2 HOT SHOT OVERVIEW 3 BASIC WIRING INSTRUCTIONS 4 HOW TO CONTROL AND SHARE MULTIPLE WELLS 5 TRANSMITTER FUNCTION SWITCH SETTINGS 5 LED INDICATORS 5 OPERATING

More information

MDC4500-4B Amplifier/Combiner Data Sheet & User Manual. February Rev 0.95

MDC4500-4B Amplifier/Combiner Data Sheet & User Manual. February Rev 0.95 MDC4500-4B Amplifier/Combiner Data Sheet & User Manual February 2016 - Rev 0.95 MDC4500-4B Amplifier IMPORTANT SAFETY and USEAGE INFORMATION Please review the following safety precautions to avoid injury

More information

TBX-1329 AC/DC COUPLING TERMINAL BLOCK

TBX-1329 AC/DC COUPLING TERMINAL BLOCK INSTALLATION GUIDE TBX-1329 AC/DC COUPLING TERMINAL BLOCK Introduction This guide describes how to install and use the TBX-1329 AC/DC coupling terminal block with the SCXI-1120, SCXI-1120D, and SCXI-1121

More information

Instruction Manual Model Upconverter

Instruction Manual Model Upconverter Instruction Manual Model 2006-01 Upconverter October 2013, Rev. B IF IN RF OUT Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or

More information

User's Manual: Series 450T AC Current Input (External Sensor), AC-Powered Transmitters

User's Manual: Series 450T AC Current Input (External Sensor), AC-Powered Transmitters User's Manual: Series 450T AC Current Input (External Sensor), AC-Powered Transmitters Table of Contents Page Introduction 1 Description 1 Specifications 2 Installation 3 Calibration 4 General Maintenance

More information

Current Probes. User Manual

Current Probes. User Manual Current Probes User Manual ETS-Lindgren Inc. reserves the right to make changes to any product described herein in order to improve function, design, or for any other reason. Nothing contained herein shall

More information

SDI SPECTRADYNAMICS, INC. HIGH PERFORMANCE DISTRIBUTION AMPLIFIER OPERATING MANUAL

SDI SPECTRADYNAMICS, INC. HIGH PERFORMANCE DISTRIBUTION AMPLIFIER OPERATING MANUAL SPECTRADYNAMICS, INC. HIGH PERFORMANCE DISTRIBUTION AMPLIFIER HPDA15RMC OPERATING MANUAL SPECTRADYNAMICS, INC 1849 Cherry St. Unit 2. Louisville, CO 80027 Phone: (303) 6651852 Fax: (303) 6046088 www.spectradynamics.com

More information

COUPLING DECOUPLING NETWORK MODEL CDN-AF4

COUPLING DECOUPLING NETWORK MODEL CDN-AF4 COUPLING DECOUPLING NETWORK MODEL CDN-AF4 II Warranty Com-Power warrants to its Customers that the products it manufactures will be free from defects in materials and workmanship for a period of 2 years.

More information

7I25 H-BRIDGE MANUAL

7I25 H-BRIDGE MANUAL 7I25 H-BRIDGE MANUAL VERSION 1.0 Copyright 2002 by MESA ELECTRONICS Richmond, CA. Printed in the United States of America. All rights reserved. This document and the data disclosed herein is not to be

More information

USER'S MANUAL DMR-6700

USER'S MANUAL DMR-6700 USER'S MANUAL Multimeter True RMS DMR-6700 CIRCUIT-TEST ELECTRONICS www.circuittest.com Introduction This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic),

More information

Instruction Manual Model Upconverter

Instruction Manual Model Upconverter Instruction Manual Model 2006-02 Upconverter October 2013, Rev. B IF IN RF OUT Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or

More information

ASX SERIES PACIFIC OPERATION MANUAL AC POWER SOURCE POWER SOURCE

ASX SERIES PACIFIC OPERATION MANUAL AC POWER SOURCE POWER SOURCE ASX SERIES AC POWER SOURCE OPERATION MANUAL PACIFIC POWER SOURCE ASX-SERIES OPERATION MANUAL FOR THE MODELS 115-ASX, 120-ASX 140-ASX, 160-ASX 315-ASX, 320-ASX 345-ASX, 360-ASX 390-ASX, 3120-ASX PPS PART

More information

User Instructions. Model PS-2001L. Power Supply. Model SPS Power Supply. Audiocom Intercom Systems Rev. A, 4/2001.

User Instructions. Model PS-2001L. Power Supply. Model SPS Power Supply. Audiocom Intercom Systems Rev. A, 4/2001. User Instructions PS-00L Model PS-00L Power Supply SPS-00 Volume Model SPS-00 Power Supply Audiocom Intercom Systems 950-7699-000 Rev. A, /00 FCC Statement This equipment uses, and can radiate radio frequency

More information

200Amp AC Clamp Meter + NCV Model MA250

200Amp AC Clamp Meter + NCV Model MA250 User's Guide 200Amp AC Clamp Meter + NCV Model MA250 Introduction Congratulations on your purchase of this Extech MA250 Clamp Meter. This meter measures AC Current, AC/DC Voltage, Resistance, Capacitance,

More information

High Frequency Sinewave Guardian TM Filter

High Frequency Sinewave Guardian TM Filter High Frequency Sinewave Guardian TM Filter 380V 480V TECHNICAL REFERENCE MANUAL FORM: SHF-TRM-E REL. April 2015 REV. 001 2015 MTE Corporation Caution Prior to start up; confirm the drive operation mode

More information

Model MV106J/MV116J. ±10nVdc to ±11Vdc Precision DC Voltage Standard Source. Operating Manual

Model MV106J/MV116J. ±10nVdc to ±11Vdc Precision DC Voltage Standard Source. Operating Manual Model MV106J/MV116J ±10nVdc to ±11Vdc Precision DC Voltage Standard Source Operating Manual This page intentionally left blank. MV 106 & MV116 OPERATORS MANUAL Serial No. Win-man\mvman.wpd This page intentionally

More information

Document # Rev. C October, GEMINI EXPRESS MULTIPLEXER User s Guide

Document # Rev. C October, GEMINI EXPRESS MULTIPLEXER User s Guide Document # 400-2601-01 Rev. C October, 2002 GEMINI EXPRESS MULTIPLEXER User s Guide TABLE OF CONTENTS SAFETY 3 Federal Communications Commission (FCC) Statement 3 Classification of LED Transmitter Device

More information

34134A AC/DC DMM Current Probe. User s Guide. Publication number April 2009

34134A AC/DC DMM Current Probe. User s Guide. Publication number April 2009 User s Guide Publication number 34134-90001 April 2009 For Safety information, Warranties, Regulatory information, and publishing information, see the pages at the back of this book. Copyright Agilent

More information

Preliminary Data Sheet!

Preliminary Data Sheet! HELLROARING TECHNOLOGIES, INC. P.O. BOX 1521 POLSON, MT 59860 406 883-3801 HTTP://WWW.HELLROARING.COM SALES11@HELLROARING.COM SSD-100200-1200V-XP-XC Preliminary Data Sheet! The SSD-100200-1200V-XP-TTL

More information

Model 5100F. Advanced Test Equipment Rentals ATEC (2832) OWNER S MANUAL RF POWER AMPLIFIER

Model 5100F. Advanced Test Equipment Rentals ATEC (2832) OWNER S MANUAL RF POWER AMPLIFIER Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) OWNER S MANUAL Model 5100F RF POWER AMPLIFIER 0.8 2.5 GHz, 25 Watts Ophir RF 5300 Beethoven Street Los Angeles, CA 90066

More information

IC800SSD Hardware Manual Pub 348R5. for models. A publication of

IC800SSD Hardware Manual Pub 348R5. for models. A publication of IC800SSD Hardware Manual Pub 348R5 for models IC800SSD104S1A IC800SSD104RS1A IC800SSD107S1A IC800SSD107RS1A IC800SSD407RS1A IC800SSD216S1A IC800SSD216RS1A IC800SSD420RS1A IC800SSD228S1A IC800SSD228RS1A

More information

Copyright Teletronics International, Inc. Patent Pending

Copyright Teletronics International, Inc. Patent Pending Copyright 2003 By Teletronics International, Inc. Patent Pending FCC NOTICES Electronic Emission Notice: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

More information

Q: What does it mean if the RF generator will not put out full power and the reflected power is nearly equal to forward power?

Q: What does it mean if the RF generator will not put out full power and the reflected power is nearly equal to forward power? Q: What does it mean if the RF generator will not put out full power and the reflected power is nearly equal to forward power? A: This generally means that the generator is in "reflected foldback." The

More information

CM605. User Manual AC/DC LOW CURRENT CLAMP-ON METER ENGLISH

CM605. User Manual AC/DC LOW CURRENT CLAMP-ON METER ENGLISH AC/DC LOW CURRENT CLAMP-ON METER CM605 ENGLISH User Manual Statement of Compliance Chauvin Arnoux, Inc. d.b.a. AEMC Instruments certifies that this instrument has been calibrated using standards and instruments

More information

Installation & User Guide. For Powering Distributed Audio Systems A45-X2 TWO CHANNEL AMPLIFIER

Installation & User Guide. For Powering Distributed Audio Systems A45-X2 TWO CHANNEL AMPLIFIER Installation & User Guide For Powering Distributed Audio Systems TWO CHANNEL AMPLIFIER A45-X2 A45-X2 TWO CHANNEL AMPLIFIER TABLE OF CONTENTS Features...1 Product Overview...2 Package Contents...4 Preparing

More information