Name: Ahmad Shahir bin Jamaludin. Phone number: / Personal motto: Educational Background:
|
|
- Michael Newton
- 5 years ago
- Views:
Transcription
1 A Name: Ahmad Shahir bin Jamaludin Address: Faculty of Manufacturing Engineering, Universiti Malaysia Pahang, Pekan Campus, 26600, Pekan, Pahang, Malaysia Phone number: / shahir@ump.edu.my Objective: Doing research work collaboration and connection Sharing technical support and information Adding further contents to the body of knowledge Giving the best in assisting the future of humanity Personal motto: Never give up until the time is up, You still can make the change! Educational Background: : Kanazawa University, Japan Doctor of Philosophy in Engineering Title of Thesis: Studies on Minimum Quantity Lubrication in Turning Process Simplified and practical evaluation of lubricating and cooling effects of oil mist by means of Finite Element Method : University Malaysia Sarawak (UNIMAS), Malaysia Master of Engineering in Mechanical and Manufacturing Engineering Title of Thesis: Study of small ball end mill capabilities with the application of Finite element method : Kanazawa University, Japan Bachelor of Engineering in Mechanical System Engineering Final year with total credits 145, CGPA of 3.47 Final year project : Development of online monitoring system to supported technical training : Ambang Asuhan Jepun (AAJ), Pusat Asasi Sains University Malaya, University Malaya, Malaysia : Sekolah Menengah Sains Labuan, Malaysia SPM with 9 A s
2 Selected Curricular/Co-Curricular Activities: Universiti Malaysia Sarawak (UNIMAS), Malaysia Bronze award for Poster Presentation in Technical Field (2012), Universiti Malaysia Sarawak (UNIMAS) Research Paper Presentation at Engineering Conference ENCON 2011, Universiti Malaysia Sarawak (UNIMAS) Research Paper Presentation at Engineering Conference ENCON 2012, Universiti Malaysia Sarawak (UNIMAS) Research Paper Presentation at Regional Conference on Advanced Processes and Systems in Manufacturing, APSIM 2011, University Kebangsaan Malaysia (UKM) Given technical and knowledge supports to 5 undergraduate students in their final years project and a junior Master of Engineering student in his research. Being a lab demonstrator for 1 semester in UNIMAS preuniversity physics laboratory Kanazawa University, Japan President of Malaysian Students' Association in Japan (MSAJ), Hokuriku Zone ( ) Student Communication Council of Kanazawa University Malaysian Student ( ) Sport Council of Kanazawa University Malaysian Student ( ) Technical and knowledge supports to 1 undergraduate student in his final year s project ( ) Professional Working Experiences: Maegashira Sdn. Bhd. (01/10/2012 ~ 31/12/2012) Advisor Operator Interpreter for Casting Shop at Perodua Manufacturing Plant. Maintenance, Handling, Safety Manual Translator for PE Body Shop at Perodua Manufacturing Plant, Rawang, Selangor, Malaysia Hydraulic Manual Translator for Factory Maintenance Department Faculty of Manufacturing Engineering, University Malaysia Pahang (15/05/2017 ~ Present) Bachelor Degree of Engineering Lecturer Faculty Promotional Coordinator Faculty Safety and Health Operation (OSHMO) Coordinator Deputy Chief of Editor Journal of Mechatronics and Advanced Manufacturing, Mekatronika Ecosystem Kondusif Sektor Awam (EKSA) Faculty Promotional Coordinator Offshore Programme Setup Team Promotional Coordinator and Market Survey Secretary for Research Focus Group Advanced Manufacturing Process and Design (AMPD) Co-Leader for Research Lab - Advanced Research on Manufacturing Processes and Design (ARCHEMEDES)
3 Committee Member of Diploma Program Setup Team Co-Editor FKP Faculty Bulletin Non-Professional Working Experiences: Restaurant Support Staff (01/01/2004 ~ 31/03/2004) Learn how to deal with customers needs and requirements Learn how to multitasking and manage effective works deliverance Learn how to remember and recall information in short period Morning Newspaper Deliverer (Hokkoku Shimbun Inc.) (01/04/2009 ~ 31/03/2010) (01/01/2014 ~ 28/02/2017) Learn how to toughen physical and mental Learn how to deal with customer s specific needs and requirements Learn how to communicate effectively with various ages of Japanese people Set of Skills: Technical Excellent in handling milling, turning, grinding, bore lathe Excellent in handling Okuma Macturn 30 CNC Machine Technology Excellent in Word Processing Software (Microsoft Office, Open Office etc.) Excellent in Engineering Design and Drafting (Solidwork, AutoCAD etc.) Excellent in Finite Element Analysis and Simulation modelling (ANSYS, DEFORM 3D) Language and Communication Excellent in Bahasa Malaysia (Speaking and Writing) Excellent in English (Speaking and Writing) Good in Japanese (Speaking and Writing)
4 Research Project: 1. Performance study of organic based minimum quantity lubrication on machining difficult-to-cut material (Principal Researcher) 2. Modes and progression of tool deterioration and their effects on cutting force during end milling of 718plus Ni based super alloy using carbide tools (Co Researcher) 3. Simulation of Assistive Grouser Mechanism for use on Lightweight Wheeled Robot for Traversing on Unconsolidated Soft Sand Inclines (Co Researcher) 4. Design strategy of stuck recovery for wheel embedded under the surface of an unconsolidated soft sand incline (Co Researcher) Publication: 1. Study on the performance of extreme cold mist mql system on turning process of stainless steel AISI 316 (Proceeding) 2. High precision estimation on physical behavior for cutting with various tool rake angle by finite element method (Proceeding) 3. A. S. Jamaludin, A. Yassin, Analysis of laser sintered materials using finite element method, Sains Malaysiana 42 (12), 2013, pp , 4. A. S. Jamaludin, A. Hosokawa, T. Furumoto, T. Koyano, Y. Hashimoto, Evaluation of the minimum quantity lubrication in orthogonal cutting with the application of finite element method, International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS 17 (1), 2017, pp A. S. Jamaludin, A. Yassin, M. S. Osman, Study on ball end milling process using two dimensional finite element method, Jurnal Mekanikal 34, 2012, pp 1-15
5 Personal Traits: Physically and mentally tough Able to work under-pressure Able to work in group Able to design effective work arrangement Fast learner Team player and loyal Highly adaptable with various peoples and situation Passionate in gaining knowledge Last minute anxiety improving working speed and effective planning Hobbies: Books collecting Doing sports (football, table tennis, futsal etc.) Playing computer games Referees: Name: Dr. Hosokawa Akira Tel No: Position: Professor Company: Kanazawa University, Kanazawa, Ishikawa, Japan Name: Dr. Abdullah bin Yassin Tel No: Position: Associate Professor Company: Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan, Sarawak, Malaysia Coming together is a beginning; Keeping together is a progress; Working together is a success. Henry Ford
EDUCATIONAL BACKGROUND
SALMIZAN BIN SALIM IC Number : 860210-46-5421 Adress : PT 19668 Kg Nyior, 23100 Paka,Terengganu Darul Iman Age : 29 Years Date of Birth : February 10, 1986 Sex : Male Nationality : Malaysian Health : Excellent
More informationCONTACT DETAILS. Current Address : No. 49 Jalan Cendana 18, Taman Rinting, Masai, Johor PERSONAL PARTICULARS STRENGTH
CONTACT DETAILS Name : Nur Farah Hafizah Bt. Mukhtar Current Address : No. 49 Jalan Cendana 18, Taman Rinting, 81750 Masai, Johor Mobile No. : +60 11 1101 9195 Email : farah6699@gmail.com PERSONAL PARTICULARS
More informationUniversiti Sains Malaysia, MSc Science (Solid State Physics) by research mode.
PERSONAL DATA Name : Azzafeerah binti Mahyuddin Date / Place of birth : 23 September 1986 / Kuala Lumpur, Malaysia Nationality : Malaysian Sex : Female Marital status : Single Religion : Islam Weight :
More informationMohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio OBJECTIVE EDUCATION RELEVANT COURSES PUBLICATIONS
Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio Email: mhaiba@yahoo.com OBJECTIVE To secure a challenging Academic / Technical position in the field of Mechanical Engineering
More informationMUHAMMAD ILMAN HAKIMI CHUA B.ABDULLAH KM 8 JALAN SEKOLAH KAMPUNG ALAI MELAKA Tel No: /
MUHAMMAD ILMAN HAKIMI CHUA B.ABDULLAH 713-3 KM 8 JALAN SEKOLAH KAMPUNG ALAI 75460 MELAKA Tel No: 013-2083267/06-2682391 Email: kimi_ilmn@yahoo.com PERSONAL DETAIL NRIC : 861030-29-5335 Age/Date of Birth
More informationBoard of Directors Dato Noordin Bin Sulaiman,
Board of Directors Dato Noordin Bin Sulaiman, Male, aged 61, Malaysian citizen, is the Chairman/Independent Non-Executive Director of M-Mode. He was appointed to the Board on 1 November 2018. He graduated
More information24-27 MAY 2017 PUTRA WORLD TRADE CENTRE. THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION KUALA LUMPUR, MALAYSIA
24-27 MAY 2017 PUTRA WORLD TRADE CENTRE KUALA LUMPUR, MALAYSIA THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION EXHIBITORS PROFILE MACHINE TOOLS Boring, Broaching, CNC
More informationCURRICULUM VITAE. Faculty of Mechanical Engineering, Universiti Teknologi Malaysia UTM Skudai, Johor
CURRICULUM VITAE Mohd Foad Abdul Hamid, PhD, CEng, CMarEng, GradIEM, Universiti Teknologi Malaysia 81310 UTM Skudai, Johor mfah@fkm.utm.my 1. Academic Qualification: Degree Doctor of Philosophy (Computational
More informationCASTMAX (M) SDN. BHD. (Company) is a manufacturer of
CASTMAX (M) SDN. BHD. (Company) is a manufacturer of Aluminium alloy and Zinc alloy die-cast products. The Company was incorporated in Malaysia under the Company Act 1965 as Private Limited Companies.
More informationDIABLO VALLEY COLLEGE CATALOG
Engineering technology ENGINEERING TECHNOLOGY - ENGTC Tish Young, Dean Physical Sciences and Engineering Division Physical Sciences Building, Room 263 Possible career opportunities Career options in engineering
More informationAPPLICATION GUIDELINE
APPLICATION GUIDELINE Required documents Curriculum in German or English (German standards, which includes a picture) Cover letter in German or English Transcript of records (the transcripts generated
More informationDM&E CORPORATION EQUIPMENT AND FACILITIES LISTING
DM&E CORPORATION EQUIPMENT AND FACILITIES LISTING DM&E Corporation PO Box 580 Shelby, NC 28151-0580 (704) 482-8876 Fax: (704) 484-8326 Email: sales@dmecutter.com Website: www.dmecutter.com Updated January
More information1 ZSI Product Experience Examples
www.zsind.com 1 ZSI Product Experience Examples www.zsind.com 2 Casting and machining (1) 1 Material: Grey Iron GG25 Process: Sand Casting Vacuum Pump 2 Material: Cast Iron GG25, GGG40 Process: Sand Casting
More informationDepartment of Mechanical Engineering
UNDERGRADUATE COURSES Curriculum for the Degree of Bachelor of Science in Mechanical Engineering: General s 6-0-05 6-0-0 6-0-04 6-0-05 6-0-0 6-0-0 5-0-7 5-0-0 5-0-0 5-0-0 5-0-04 6-0-4 6-0-0 6-0-0 6-0-0
More information(Updated: ) Lot 11393, Jalan Kuching, Taman Jelita 3, Off Taman Tunku, Miri, Sarawak, Malaysia
Joseph Anak Usa (Updated: 2012-5-18) Lot 11393, Jalan Kuching, Taman Jelita 3, Off Taman Tunku, 98000 Miri, Sarawak, Malaysia Email : cash6945@yahoo.com Tel : +6013-6611005(Mobile) Availability : Immediately
More informationHIRING COMPANY: Dynomax Inc. INDUSTRY: Aerospace and Defense POSITION: CNC Programmers, Machinists, Operators
CNC Programmers, Machinists, Operators Dynomax is looking for operators, machinists and programmers available for basic setup through complete processing of advanced components for CNC turning/cnc milling
More informationCURRICULUM VITEA. B. Sc. Industrial Engineering (Hons: Cum Laude), University of Miami, Florida, U.S.A, 1986
CURRICULUM VITEA Name Address Adnan Bin Hassan Office Kingdom of Saudi Arabia Faculty of Engineering-Rabigh King Abdulaziz University Rabigh, P.O.Box 344 Rabigh 21911 Saudi Arabia Malaysia Department of
More informationAISHWIRYA COLLEGE OF ENGINEERING AND TECHNOLOGY Paruvachi, Bhavani W eb: aishwaryacollege.com,
AISHWIRYA COLLEGE OF ENGINEERING AND TECHNOLOGY Paruvachi, Bhavani 638312. W eb: aishwaryacollege.com, E-mail: acetdr@gmail.com Department Details for Website Name of the Department: MECHANICAL ENGINEERING
More information2-Spindle Horizontal CNC lathes
2-Spindle Horizontal CNC lathes 2-Spindle Horizontal CNC lathes 2SP series machines are true 2-spindle lathes that boast space savings and high productivity Max turning diameter length: ø0 0 Max turning
More informationCURRICULUM VITAE MOHD KHAIRUL NAJMI BIN MOHD NAJID. Contact Info. Educational Background
CURRICULUM VITAE MOHD KHAIRUL NAJMI BIN MOHD NAJID Address Lot 1409, Jalan Masjid, Kg. Kolam, K. Ibai, 20400, K. Terengganu, Terengganu Darul Iman, Malaysia. Telephone No. 09-6175627 Mobile No. 019-9362684
More informationM.Tech in Machine Design
M.Tech in Machine Design Department of Mechanical Engineering The National Institute of Engineering Mysore-08 (Established in 1946) A Heritage of Excellence NIE Premier educational institutions in India
More informationEffects of Tool Rake Angle on Tool Life in Turning Tools
International Journal of Scientific & Engineering Research Volume 3, Issue 4, April-2012 1 Effects of Tool Rake Angle on Tool Life in Turning Tools Engr. Kaisan Muhammad Usman ABSTRACT- In this work, the
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationFounding Trustee of The Community Chest, a company limited by guarantee established by the private sector for charity purposes
DIRECTORS PROFILE Tan Sri William H.J. Cheng Non-Independent Non-Executive Chairman Y. Bhg. Tan Sri William H.J. Cheng, a Malaysian, male, aged 74, was appointed to the Board on 27 October 1989 and has
More informationCONTENTS TABLE OF. Introduction. Company Details. Organization Chart. Certificates & Insurances. Our Products. List of machineries and Equipment
TABLE OF CONTENTS Introduction... 01 Company Details... 02 Organization Chart... 04 Certificates & Insurances... 05 Our Products... 10 List of machineries and Equipment... 31 Other Companies of Group...
More informationMetal Cutting (Machining)
Metal Cutting (Machining) Metal cutting, commonly called machining, is the removal of unwanted portions from a block of material in the form of chips so as to obtain a finished product of desired size,
More informationCutting with broach. You can find here some notices about broaching operation. Fig.N 1
Cutting with broach You can find here some notices about broaching operation. Fig.N 1 Amount of cut per tooth This parameter depends on many characteristic of broaching operation like: Material of the
More informationCurriculum Vitae. Abd El Khalick Mohammad, 17 Nov Doctor of Engineering H-index: 6 and Citation: 107 (Google Scholar) 1.
Curriculum Vitae Abd El Khalick Mohammad, 17 Nov. 1984 Doctor of Engineering H-index: 6 and Citation: 107 (Google Scholar) Previous position: Research Fellow Centre for E-City EXQUISITUS, Electrical and
More informationRoughing vs. finishing
Finishing methods Roughing vs. finishing Roughing removing material as fast as possible, without special demands on surface and low demand on precision high Q, high IT, high Ra Finishing making final surface
More informationFRANKLIN BRONZE PRECISION COMPONENTS
FRANKLIN BRONZE PRECISION COMPONENTS FRANKLIN BRONZE PRECISION COMPONENTS AN AUTOMATED INVESTMENT CASTING FOUNDRY OFFERING TOOLING, MACHINING AND TECHNICAL EXPERTISE. DELIVERING HIGH-QUALITY, CONSISTENT
More informationKaren Cheah Yee Lynn Partner
Karen Cheah Yee Lynn Partner Tel: +603 2055 3908 Fax: +03 2055 3880 Email: karen-cheah@chooi.com.my Corporate & Practice Areas: Banking & Finance, Corporate Commercial, Real Estate, Mergers & Acquisitions
More informationCURICULUM VITAE (8 th September nd January 2019)
CURICULUM VITAE (8 th September 2015 22 nd January 2019) 1. Personal Particulars Name : Dr Mohd Yazid bin Abu IC No. : 870201-23-5359 Date of birth : 1 st February 1987 Age : 32 years old Nationality :
More informationTIPS FOR CHOOSING A PROTOTYPING MACHINE SHOP
CHOOSING the right prototyping machine shop for your next project is quite possibly the most important decision you will make in the entire process. This is particularly true for entrepreneurs with little
More informationNational technical University Kharkiv polytechnic institute. Faculty Mechanicaltechnological. Department Foundry
National technical University Kharkiv polytechnic institute Faculty Mechanicaltechnological Department Foundry Producing specialty: Knowledge area 13 Mechanical Engineering Specialty 131 "Applied mechanics
More informationVirtual Manufacturing Laboratory:
Virtual Manufacturing Laboratory: Desktop PC (Core i5)-3 nos. Software: 1. IGRIP Interactive Graphics Robot Instruction Programme. (Stratasys, Model-Objet. 30) 2. QUEST- Queuing vent Simulation (Deneb
More informationSUB-CONTRACT MACHINING. Collaborating with the World s Finest
SUB-CONTRACT MACHINING Collaborating with the World s Finest 55 Years Expertise Superior Quality Craftsman Tools is one of Europe s Our services range from one-off prototypes Craftsman Tools is fully accredited
More informationJob Ready Assessment Blueprint. Precision Machining. Test Code: 4052 / Version: 01. Copyright All Rights Reserved.
Job Ready Assessment Blueprint Precision Machining Test Code: 4052 / Version: 01 Copyright 2009. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written
More informationEscope (EVEN)
DHIRAJLAL GANDHI COLLEGE OF TECHNOLOGY Opp. Salem Airport, Sikkanampatty, Omalur, Salem. Tel.No: 04290-233 355, www.dgct.ac.in, E-mail id: hod.eee@dgct.ac.in DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
More informationGender Male Date of birth 21 April 1984 Nationality INDIAN. Assistant Professor in Mechanical Engineering (Machine Design)
Curriculum Vitae PERSONAL INFORMATION Mohammad Azeem 57- I Block, Muneer Apartments, Near Badi Masjid, Sir Syed Nagar, Aligarh, 202002, +91-9058819938 ask2azeem@gmail.com https://www.linkedin.com/in/azeemmohammad
More informationCNC Machinist: JOB CODE: CNC operator/machinist
CNC Operator and Setup/Machinist Dynomax is looking CNC Operators and Setup/Machinists available for basic setup through complete processing of advanced components for CNC turning/cnc milling machines
More informationClass Title Description Credit Hours Contact Hours Lecture Hours Lab Hours ESU NOTE
2 3 4 AIT 1010 Construction Measurements and Calculations Course covers fundamental measuring and calculation skills essential to the skilled craftsperson working in the construction industry. Provides
More informationTHE COMMERCIALISATION OF RESEARCH BY PUBLIC- FUNDED RESEARCH INSTITUTES (PRIs) IN MALAYSIA
THE COMMERCIALISATION OF RESEARCH BY PUBLIC- FUNDED RESEARCH INSTITUTES (PRIs) IN MALAYSIA By Ramraini Ali Hassan BBA (Hons), MSc in Entrepreneurship This thesis is presented to the Murdoch University,
More informationMetropolitan Community College COURSE OUTLINE FORM LEC: 9 LAB:
Course Title: Machine Tool II Course Prefix & No.: PRMA 1402 LEC: 9 LAB: 0 Credit Hours: 9 COURSE DESCRIPTION: Students construct basic machine projects using various pieces of shop equipment including
More informationNarwhal. Boring, milling and drilling machine
Narwhal Boring, milling and drilling machine NARWHAL NARWHAL 1600 NARWHAL 2000 POWERFUL BORING AND MILLING MACHINE with independent Gundrill bta / STS drilling UNIT GALBIATI GROUP QUALITY, PRECISION, INNOVATION.
More information1 of 9. Westmac Solutions Sdn. Bhd. SEAWARD SOLAR TESTERS. Hydraulic and compressor lubricants
Westmac Solutions Sdn. Bhd. SEAWARD SOLAR TESTERS SEAWARD Hydraulic and compressor lubricants Machtbefugnis lubricants brings world class technological insights to its products, offering you the best formulations
More informationPresentation on Holistic Approach to Precast Concrete Construction
Presentation on Holistic Approach to Precast Concrete Construction Monday, 12 November 2018 (8.30 a.m. 5.00 p.m.) MATRADE Exhibition and Convention Centre Menara MATRADE Jalan Sultan Haji Ahmad Shah 50480
More informationINDUSTRIAL TECHNOLOGY
INDUSTRIAL TECHNOLOGY INDUSTRIAL TECHNOLOGY COURSES CAN BE USED AS ELECTIVE CREDITS CONTENT MISSION STATEMENT: The content area of Industrial Technology education provides a foundation for all students
More informationDCT/Precision, LLC Engineered Tooling Specialists for Over Fifty Years
DCT/Precision, LLC Engineered Tooling Specialists for Over Fifty Years Bore & Chamfer Tools Special OD Turning Tools Wedge Bore Innovating Patent Pending Hole-Making Solutions Complete Line of ANSI Standard
More informationFluid Technology Automation Technology smart buildings Technology
Fluid Technology Automation Technology smart buildings Technology THE PARTNER OF Higher Standards 002003 Hainzl Technology for Higher Standards Engineering & system competence 004-005 Production ServicE
More informationMechanical Engineering Journal
123456789 Bulletin of the JSME Mechanical Engineering Journal Vol.3, No.2, 216 Measurement of tool temperature in burnishing using diamond tip Masato OKADA*, Masayoshi SHINYA**, Hidetake TANAKA*** Naoki
More informationSURFACE LAYER PROPERTIES IN DRY TURNING OF C45 STEEL
SURFACE LAYER PROPERTIES IN DRY TURNING OF C STEEL Tadeusz Leppert University of Technology and Life Sciences ul. Kordeckiego, - Bydgoszcz, Poland e-mail: tleppert@utp.edu.pl Abstract In machining operations
More informationDesign Optimization and Development of Portable Magnetic Clamping (MagCLAMP) Based on Machining Performances
International Journal of Engineering & Technology IJET-IJENS Vol:18 No:01 17 Design Optimization and Development of Portable Magnetic Clamping (MagCLAMP) Based on Machining Performances N. Ab Wahab, Muhamad
More informationFBL-250Y/320Y/SY Series. CNC Turning-Milling Machines Linear/Box Way
FNLY/2Y/SY Series FBLY/2Y/SY Series CNC TurningMilling Machines Linear/Box Way Multifunctional Turning and Milling Excellence FNLY/2Y/SY Linear Way Series FBLY/2Y/SY Box Way Series CNC TurningMilling Machines
More informationTo understand the concept of basic engineering mechanism Compulsory : MANUFACTURING TECHNOLOGY II. Office phone
BME505 - MANUFACTURING TECHNOLOGY II Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME505 - MANUFACTURING TECHNOLOGY II Fifth
More informationPIR ROSHAN DIN SHAH RASHDI,
PROFILE PIR ROSHAN DIN SHAH RASHDI, PhD Mehran University of Institute of Science and Technology Development Mehran University of Engineering & Technology Jamshoro, Sindh Pakistan Phone: + 92 222 772430/31
More informationMachine Tool Technology
184 Location: Patterson Campus - Bldg. F Program Information Almost every product made by American industry contains metal parts or is manufactured by machines made with metal parts. With high demand for
More informationOn-Site Machining Services Decommissioning Services In-Situ Portable Machine Rental Machining & Fabrication Services Machining & Project Management
On-Site Machining Services Decommissioning Services In-Situ Portable Machine Rental Machining & Fabrication Services Machining & Project Management Subsea Decommissioning Services Mactech Europe - At a
More informationFICHE TECHNIQUE. 275 C - ZA du Jasmin SAINT GENIX SUR GUIERS - Tel: +33 (0)
2880 x 27 x 0,9 Universal robust band saw is appraised for general use in continuous uninterrupted production plants and in work-shops (work on locks, maintenance) as well. Industrial band 27 x 0.9 mm
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationCURRICULUM VITAE. October 2017
Work Address: E-mail: CURRICULUM VITAE YITZCHAK YIFRACH (Senior Teacher) October 2017 ORT Braude College, Department of Mechanical Engineering Snunit 51 St. P.O. Box 78, Karmiel 2161002, Israel Tel.: +
More informationRobotics and Automation Software Developer
Robotics and Automation Software Developer Do the words robotics, Advanced Kinematics, and Artificial Intelligence excite you? Are you driven to discover software solutions to robotics problems that robotics
More informationHybrid Additive/Substraction Method for Rapid Casting Prototypings with Light-Cured Sand
Paper ID #17439 Hybrid Additive/Substraction Method for Rapid Casting Prototypings with Light-Cured Sand Dr. Pavel Ikonomov, Western Michigan University Associate Professor of Engineering, Design, Manufacturing,
More informationM.Tech: Industrial Automation & Robotics The National Institute of Engineering, Mysore-08. (Established in 1946) Department of Mechanical Engineering
M.Tech: Industrial Automation & Robotics The National Institute of Engineering, Mysore-08 (Established in 1946) Department of Mechanical Engineering About our Institute and the Department The National
More informationDUGARD. DUGARD Machine. DUGARD CNC Lathes. Dugard 220LY / 220LSY CNC Turning and Milling Centres. Expertise with Imagination.
DUGARD Expertise with Imagination DUGARD CNC Lathes Dugard 220LY / 220LSY CNC Turning and Milling Centres Multi-axis lathes with linear ways and sub-spindle option DUGARD Machine Tools www.dugard.com sales@dugard.com
More informationMaster s Programmes. 35+ MSc programmes (all in English) Delft University of Technology. In Delft in the Netherlands. Science, Engineering, Design
Master s Programmes Delft University of Technology PHOTO: MARIEKE ODEKERKEN 35+ MSc programmes (all in English) Science, Engineering, Design In Delft in the Netherlands #20 QS Engineering & Technology
More informationPersonal Details. Career Objective. Awards and Accomplishments
Dr. Anis Fatima Assistant professor Industrial and Manufacturing NED University of Engineering and Technology Room No. 204, IM building Email: anisf@neduet.edu.pk Telephone Ext: 2250 Personal Details Gender
More informationSecondary Technical School TAG Term 1
TOPIC AND ASSESSMENT GUIDE Course Code Course Title CNCCT1001 Cool Tools Term/Year Term 1 2013/20 Programme Grade 10 Periods 24 periods/ 2 periods per week Course Purpose This course provides the learner
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationARG 330 CF-NC automat
OFFER LIST Pilous Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz ARG 330 CF-NC automat 3870 x 34 x 1,1 90 +45 330 250 320 240 360 x 250 250 x 150
More informationBAXTER O'TULLE 132 Horace Ave Gordonville, KY (555)
BAXTER O'TULLE 132 Horace Ave Gordonville, KY 93555 (555) 555-2938 botulle@emailplace.com RESEARCH INTERESTS Automation Distribute Systems Control Decentralization Control Mechantronics and Artificial
More informationDEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY MASTER SOETE LABORATORY
DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY MASTER THESIS @ SOETE LABORATORY A work in which a student gives proof of analytical, independent,
More informationIndian Institute of Technology Patna M.Tech (Mechatronics) Placement Brochure
Indian Institute of Technology Patna M.Tech (Mechatronics) Placement Brochure i 2016-17 CONTENTS 1 About Us 5 Research Activities 2 Course Structure 6 Sponsored Projects 3 Laboratory Facilities 7 Major
More informationHe does not have any directorship in other public companies and listed corporations.
MR. LOH KOK BENG Mr. Loh Kok Beng was appointed as a Director of Tek Seng on 16 August 2004. He is currently responsible for the Group financial and administrative affairs, and development of the strategic
More informationDUGARD EAGLE 200HT / 200MC
DUGARD EAGLE 00HT / 00MC Slant Bed, High Precision CNC Lathes EAGLE 00HT 5 Slant Bed Heavy duty cast construction allowing optimum chip clearance Rigid, High Precision Spindle Unit Model Eagle 00HT The
More informationNEWSLETTER Eleventh Issue
Kobe University Graduate School of FEBRUARY 016 NEWSLETTER Eleventh Issue Seminar : International Arbitration Inside Seminar on International Arbitration Look inside to learn more about International Arbitration
More informationSINGAPORE BRANCH. Mr. Terence Teo Chin Poh B.A. (Econs.) Principal Officer. Encik Eddy Azly Abidin Chartered Insurer, MBA, ACII, AMII General Manager
116 LPI Capital Bhd ANNUAL REPORT 2011 MANAGEMENT team Mr. Tee Choon Yeow B.Com., CA (NZ), CA (M), FCPA (Aust.) Advisor LONPAC INSURANCE BHD (wholly-owned subsidiary of LPI Capital Bhd) Mr. Tan Kok Guan
More informationPROJECT REFERENCES: SANIL TRANSFORMER. Last updated: 17-Apr-18
PROJECT REFERENCES: SANIL TRANSFORMER Last updated: 17-Apr-18 CERTIFICATIONS & APPROVALS APPROVED by JKR CESI, UL, TUV, BSI Type Test comply to IEC60076 - Made in KOREA. - Specialist in Low Losses Transformer.
More informationFor planning process like MPS, MRP, Production planning, Forecasting.
AYYAZ AHMAD 283 J1 M.A JOHAR TOWN LAHORE PAKISTAN ayz90@hotmail.com, ayz90@yahoo.com.au Cell:+92-3213777017 Profile Summary & Strengths A skilled professional with a strong desire to contribute to the
More informationGlobal Expansion of Human Activity and The Wave of Motorization
About Fine Blanking Global Expansion of Human Activity and The Wave of Motorization Enhancing the productivity of international automobile manufacturers In the attractive international automobile manufacturing
More informationThe level of scientific culture among Malaysian and Japanese students
Available online at www.sciencedirect.com Procedia Social and Behavioral Sciences 1 (2009) 2809 2813 WCES 2009 The level of scientific culture among Malaysian and Japanese students Lilia Halim a, T. Subahan
More informationPilous ARG 220 DESCRIPTION
OFFER LIST Pilous Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz ARG 220 2600 X 27 X 0,9 90 +45 +60 220 170 105 220 160 75 270 x 150 175 x 80 105
More informationCambridge National Engineering. Mark Scheme for January Unit R109: Engineering materials, processes and production
Cambridge National Engineering Unit R109: Engineering materials, processes and production Level 1/2 Cambridge National Award/Certificate in Engineering Manufacturing Mark Scheme for January 2017 Oxford
More informationNZQF NQ Ref 1262 Version 3 Page 1 of 22
NZQF NQ Ref 1262 Version 3 Page 1 of 22 National Certificate in (Level 4) with strands in Fitting and Machining, General Engineering, Machining, Maintenance Engineering,, and Electricity Supply Level 4
More informationCURRICULUM VITAE. Address : 114A Jalan Makam, Langgar, Kedah, Malaysia. Correspondence: Pusat Pengajian Sains Komputer, 11800, USM Penang
CURRICULUM VITAE 1.PERSONAL PARTICULAR: Full Name : Nur Syibrah Binti Muhamad Naim Address : 114A Jalan Makam, Langgar, 06500 Kedah, Malaysia Correspondence: Pusat Pengajian Sains Komputer, 11800, USM
More informationPERFORMANCE : VALUE FTC-SERIES SLANT BED CNC TURNING CENTERS
PERFORMANCE : VALUE by FTC-SERIES SLANT BED CNC TURNING CENTERS PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools that has been recognized
More informationFaculty of Maritime Studies Leer
Faculty of Maritime Studies Leer Faculty of Technology/Business/Maritime Education Faculty of Maritime Studies Introduction to new Master programme International Ship Technology, Maritime Operations and
More informationCOMPREHENSIVE ONLINE TRAINING FOR SCIENTIFIC INJECTION MOLDING
COMPREHENSIVE ONLINE TRAINING FOR SCIENTIFIC INJECTION MOLDING Fundamental Injection Molding Courses An Introduction to Injection Molding * Injection Molding Basics, Part 1: The Injection Molding Machine
More informationFreshman Engineering Drawing and Visualization at Youngstown State University. Hazel M. Pierson, Daniel H. Suchora. Youngstown State University
Session 2438 Freshman Engineering Drawing and Visualization at Youngstown State University Hazel M. Pierson, Daniel H. Suchora Youngstown State University Introduction The first year engineering curriculum
More informationDEVELOPMENT OF PORTABLE LINEAR POSITIONING TABLE FOR DRILLING MACHINE
DEVELOPMENT OF PORTABLE LINEAR POSITIONING TABLE FOR DRILLING MACHINE N. Ab Wahab, Abdul Fattah Bin Abd Rahim, Abd Khahar Bin Nordin, Basri Bin Bidin, Mohd Azimin Bin Ibrahim, Madiha Binti Zahari and Nurliyana
More informationEstablishing a Writing Habit. By: Candace Buckner Date: 22 August 2018
Establishing a Writing Habit By: Candace Buckner Date: 22 August 2018 So what is a writing habit? A writing habit, sometimes referred to as a writing practice, is a set time or amount of time for writing
More informationAnnual Report for Assessment of Outcomes Machine Manufacturing Technology (MMT) Program
Annual Report for Assessment of Outcomes 2011-2012 Machine Manufacturing Technology (MMT) Program 1. Describe changes that have been implemented towards improving students attainment of outcomes that resulted
More informationSENIOR MANAGEMENT. Mukri Bin Harun Acting Chief Executive Officer, Chemicals. Dr. Khew Mei Ching Chief Executive Officer, Polymers
SENIOR MANAGEMENT Mukri Bin Harun Acting Chief Executive Officer, Chemicals Dr. Khew Mei Ching Chief Executive Officer, Polymers Noor Azwah Binti Samsudin Head, Legal & Secretarial/Group Company Secretary
More informationWHERE THE WORLD MEETS INNOVATION
EN 3 www.siroco.com.pt Put all you are into the smallest thing you do. Kathy Fehst CEO It s a simple way to describe us. We like what we do and we are committed, to us, to our employees, to our customers,
More informationTECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH
TECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH MICRO-MESH finishing belts provide desired surface qualities and economic benefits to many types of finishing operations, and are available in a range
More informationDuraTurn Series. CNC Lathe. для получения подробной информации, пожалуйста, напишите нам на почту
DuraTurn 2030 DuraTurn 2050 DuraTurn 2550 CNC Lathe DuraTurn Series Durable Universal Reliable Affordable Accurate CNC Lathe with Excellent Operability and Machining Capability The DuraTurn series, which
More informationExcellence in Minimum Quantity Lubrication.
Excellence in Minimum Quantity Lubrication www.wouters-tecnolub.com 1926 About Wouters-Tecnolub Since 1926, Wouters SA is specialized in the manufacturing of mechanical parts for gases industry. The company
More informationMECHATRONICS Master study program. St. Kliment Ohridski University in Bitola Faculty of Technical Sciences Bitola.
MECHATRONICS Master study program St. Kliment Ohridski University in Bitola Faculty of Technical Sciences Bitola www.tfb.edu.mk 1 2 Contents Mechatronics - an interdisciplinary approach Competences / Invest
More informationM.Tech: Industrial Automation & Robotics
M.Tech: Industrial Automation & Robotics The National Institute of Engineering Mysuru-08 (Established in 1946) Department of Mechanical Engineering About our Pride Institute and the Department The National
More informationUNIVERSITI TEKNOLOGI MARA SUSTAINABLE DESIGN: RATTAN FOR OFFICE GREEN FURNITURE
UNIVERSITI TEKNOLOGI MARA SUSTAINABLE DESIGN: RATTAN FOR OFFICE GREEN FURNITURE MUHAMMAD MUIZZUDDIN BIN DARUS Design Report submitted in partial fulfilment of the requirements for the degree of Master
More informationDrona Gyaan MACHINING-INTRODUCTION
Drona Gyaan MACHINING-INTRODUCTION Manufacturing is a VALUE ADDITION process by which raw materials or objects of low value due to inadequate material properties, poor or irregular size, shape and finish
More information