MUHAMMAD ILMAN HAKIMI CHUA B.ABDULLAH KM 8 JALAN SEKOLAH KAMPUNG ALAI MELAKA Tel No: /

Size: px

Start display at page:

Download "MUHAMMAD ILMAN HAKIMI CHUA B.ABDULLAH KM 8 JALAN SEKOLAH KAMPUNG ALAI MELAKA Tel No: /"

Randolph Williamson
6 years ago
Views:

MUHAMMAD ILMAN HAKIMI CHUA B.ABDULLAH 713-3 KM 8 JALAN SEKOLAH KAMPUNG ALAI 75460 MELAKA Tel No: 013-2083267/06-2682391 Email: kimi_ilmn@yahoo.

1 MUHAMMAD ILMAN HAKIMI CHUA B.ABDULLAH KM 8 JALAN SEKOLAH KAMPUNG ALAI MELAKA Tel No: / kimi_ilmn@yahoo.com PERSONAL DETAIL NRIC : Age/Date of Birth : 29 Years Old/30 Oct 1986 Religion : Islam Marital Status : Married Mailing Address : KM 8 Jalan Sekolah Kampung Alai Melaka Nationality : Malaysian License : B2 dan D Language : English, Malay, Mandarin, Hokkien. EDUCATION/ORGANIZATION BACKGROUND Year Year : Universiti Teknikal Malaysia Melaka (UTeM) : Ongoing Doctor of Philosophy (Ph.D) (Mechanical) : (Submit Thesis Feb/2015) : Board of Engineers Malaysia (BEM) : G.E 93758A (Manufacturing) : Currently : Universiti Kebangsaan Malaysia,Bangi (UKM) : Master in Science (MSc) (Mechanical & Material) Year : : Universiti Kebangsaan Malaysia,Bangi (UKM) : Bachelor of Engineering (Hons) in Mechanical (Manufacturing) Year : CGPS : 3.13/4 CGPA : 3.08/4 : Malacca Matriculation : Matriculation Year : CGPA : 3.22/4 School : Sekolah Menengah Sains Machang Certificate : Sijil Pelajaran Malaysia Year : 2003

2 STRENGHTS Confident in every speech/assignment/job delivery Able to self-conduct researches/findings/proposals/publications Love writing and publishing findings (eager to aim for ISI) Capable to lead a team to fulfill project objectives and requirements Able to plan and schedule on time to meet the schedule Willing to work extra hours to get the job done Ability to work both independently and as an effective member of a team A fast learner and a very good listener Focused and can be aggressive if the situation calls for it Possess an engaging personality and the ability to treat others fairly especially in a team environment Self-motivated and able to get myself going and take charge JOB EXPERIENCES Company Date : University Teknikal Malaysia Melaka, UTeM : Lecturer at Faculty of Engineering Technology (FTK) : Currently Company : University Teknikal Malaysia Melaka, UTeM : Research Assistance FKM, FTK (Automotive and Mechanical) Date : and Company : CTRM Aero Composites Sdn. Bhd. : Planner for Fan Cowl Project Date : Company : HICOM Diecasting SDN. BHD. : Process/ Machining/ Production Engineer for ZFSM project Date : Company : Universiti Kebangsaan Malaysia, Bangi. : Research Assistance (Mechanical and Manufacturing Department) Date : 08 Feb Dec 2009 SUMMARY EXPERIENCES A research assistant in correlation with current P.h.D study. Responsible for being a demonstrator for bachelor degree student in their lab tutorial, and guiding final year student (P.S.M) in their final project. It also required one to conduct a lot of lab and application testing to gather all the relevant data for producing high impact journal (mainly aiming for ISI journal). Was involved in the publishing of a lot of journals and proceeding papers. Attended a lot of conference/symposium and also exhibition, and won a lot of award for the current project. (as mention in awards section)

3 A planner for GoodRich, an aerospace manufacturing company based in America for the (UTAS) B787 Fan Cowl project (Fan Cowl GE & RR) at CTRM AC. Responsible for MPS of the whole Fan Cowl panels and their Sub-Assembly components, scheduling for the productions process flow throughout the whole year & forecast for next forward years, managing delivery and manage the demand from customer to meet the Boeing requirement. Planned recovery schedule for each stations (layup/cnc/cmm/ndt) and ect, mostly due to the increase of demand from customer. Communicated directly to customers and was involved with a lot of people/departments to solve occurring issues. Learned a lot regarding composites in every process and gained better knowledge in advance composited for aero structure. A Process/Machining Engineer in Machining Engineering Department at HICOM Diecasting SDN. BHD. Responsible for ZFSM (Steering Housing) Mass Production product (Steering for Verso, Manual Steering for Perodua, GMX (USA)). In charge in reducing cost/pcs, optimize the cycle time of the operation, Reduce Rejection (PPM) by below 8000 and increase OEE target from 87% to 95%. Recruited new projects such SIMMEN VEDEO and Servo Housing, and was responsible for Cost Quotation (Better explanation while face to face communication). Was also involved in 8D team, cooperated with Quality Department to solve Product Quality problem and Customer complaints, and became a member of PPD (Product Part Development) Department who s in charge in updating and changing The FMEA and Action Plan. A leader of Steering Housing. Monitored the production and technical side, reviewed production schedules to meet customer order, helped to solve machine problem due to tack time problem of the machine, and was involved in the efforts to standardize the machine cycle time into its optimum. Also involved in CMM upgrading programmer under QC (Quality Control) team, reducing manual touching in order to eliminate human variance while CMM checking been run. Target 0 Variance for incoming month. A member of the Machining Department management team which is in charge in ordering and managing PR and PO for Machining Department, and basically in charge of ordering new cutting tool due to cost reduction plan. Involved a lot with the suppliers, comparing product price and quality. A research assistant in Mechanical and Manufacturing Department at UKM since 08 July until 31 Dec Responsible as a researcher, instructor, assistant, demonstrator and ensured that the entire project was maintained according to the schedule. Patented for the project (Total Knee Replacement) which collaborated with PPUKM previously. Active in publication of works, especially journals, and is involved with a lot of research especially in Manufacturing Process (Metal Injection Molding).Attended a lot of course especially in analyzed data such Taguchi Method for Process and Product Optimization held by IEEE and Electron Devices Society. Technical committee in the 3 rd Powder Metallurgy Symposium & Exhibition 2009, a conference at the Royale Bintang Hotel, Kuala Lumpur in A presenter at the 8th International Conference on Composite Science and Technology (ICCST/8), the 4 th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, Regional Engineering Conference 2010, Seminar III Advance Manufacturing Research Group 2009 (AMReG 09), and the Malaysian Metallurgical Conference 2009)

4 LIST OF PUBLICATION AND JOURNALS PAPER M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N.R. Mat Nuri, N. Tamaldin, M. Hassan, S.A. Rafeq, Effect of hbn/al 2 O 3 Nanoparticles on Engine Oil Properties, Energy Education Science and Technology Part A, 32:5 (2014), pp (Scopus indexed). M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, M. Hassan, S.A. Rafeq, Improving Engine Oil Properties by Dispersion of hbn/al 2 O 3 Nanoparticles, Applied Mechanics and Materials, 607 (2014), pp DOI: (Scopus indexed). M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Effect of hbn/al 2 O 3 Nanoparticle Additives on the Tribological Performance of Engine Oil, Jurnal Teknologi (Sciences and Engineering), 66:3 (2014), pp DOI: (Scopus indexed). M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Optimization of Tribological Performance of HbN/Al 2 O 3 Nanoparticles as Engine Oil Additives, Procedia Engineering, 68 (2013), pp DOI: (Scopus indexed). M.I.H. Chua, A.B. Sulong, M.F. Abdullah, N. Muhamad, Optimization of Injection Molding and Solvent Debinding Parameters of Stainless Steel Powder (SS316L) Based Feedstock for Metal Injection Molding, Jurnal Sains Malaysiana, 42:12 (2013), pp (ISI indexed). M.I.H. Chua, A.B. Sulong, N. Muhamad, M.F. Abdullah, C.H.C Haron, Optimization of Injection Parameters Using 16µm Stainless Steel Powder (SS316L) at 63 vol.%, 63.3 vol.% and 64 vol.% Powder Loading by Taguchi Method for Metal Injection Molding, Key Engineering Materials 471 (2011), pp (Scopus indexed) A.B. Sulong, M.I.H. Chua, M.F. Abdullah, S.W. Koon, N.H.N. Yahya, R. Ramli, Design Approach for Jig in Computer Assisted Total Knee Replacement Surgery, Key Engineering Materials, 447 (2010), pp (Scopus indexed) M.F. Abdullah, A.B. Sulong, N. Muhamad, M.I.H. Chua, N.H.N. Yahya, Comparison on Rheology Properties of Polypropylene and Polyethylene as Binder System with Stainless Steel 316L for Metal Injection Molding, Key Engineering Materials, 471 (2011), pp (Scopus indexed) M.F. Abdullah, M.I.H. Chua, A.B. Sulong, J.A. Ghani, Effect of Insert Nose Radius and Processing Cutting Parameter on the Surface Roughness of AISI Stainless Steel, Key Engineering Materials, 447 (2010), pp (Scopus indexed) M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N.R. Mat Nuri, Optimized Nanolubricant for Friction Reduction, Extended abstract of 40 th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, Lyon, France, 4~6 September 2013.

5 AWARDS Nano-Oil As Effective Lubricant For Improving A Small Diesel Engine Performance. Gold Award at Expo Penyelidikan dan Inovasi 2013 UTeMEX2013. Held in Dewan Besar UteM, 12 December 2013 Nano-oil for A Greener Future. Silver Award at BioMalaysia & BioEconomy Asia Pacific 2013, held on October 2013, at Persada Johor International Convention Centre, Johor Bahru Nano-oil for A Greener Future. Silver Award at PECIPTA International Conference and Exposition on Invention of ns of Higher Learning. Held at KLCC (7-9 Nov 2013) New Enhanced Engine Oil with Nanoparticles Additive. Bronze Award at BioInnovation Awards 2014, held on November 2014, at KLCC. SOFTWARE/SKILLS Microsoft Office (Excellent) Solid work (Excellent) Minitab AutoCAD (Excellent) Mechanical Desktop (Excellent) Inventers ( Excellent) DeltaCAD ( Excellent) X- CAM ( Intermediate) Mechanical Desktop (Excellent) Mold Flow (Intermediate) Finite Element Method (FEM) Taguchi Method (Excellent) Cartia (Intermediate) ProCAST (Intermediate) KNOWLEDGE / (COURSE TAKEN) Facilities Planning Manufacturing Strategy Manufacturing Process Quality Assurance Introduction to engineering Engineering Mathematics 1 (aljabar) Material Science Computer Programming Islamic Civilization & Kenegaraan Malaysia Fundamental Applies Mechanics Introduction to Electric Engineering Introduction to Engineering Thermodynamics Engineering Mathematics 2 (calculus) Engineering Graphics Engineering Skills Foundation English Scientific Thinking Engineering Mathematics 3 (differential equation) Measurement & Instrumentation Fundamental of Fluid Mechanics Engineering Materials Dynamic Engineering Engineering Statistic Manufacturing Process 1 Material Mechanics Numerical Method Fluid Power Machines and Power Electronics CAD/CAM Manufacturing Process 2 Quality assurance Facilities Planning Machine process Automation and robotic Manufacturing strategy management Economic Foundation English Research methodology Project Management

6 REFERENCES Ir. P.M. Dr. Abu Bakar Sulong Dr. Mohd. Nizam Ab. Rahman Master Thesis Supervisor Industrial Training Co-ordinator, Faculty of Engineering, Faculty of Engineering, Universiti Kebangsaan Malaysia, Universiti Kebangsaan Malaysia, Bandar Baru Bangi, Bandar Baru Bangi, Selangor. Selangor. Tel: Fax: Tel: (office) En. Muhammad Zain Mohtar E8-2 Engineer Supervisor, Head of Department Production Planning, CTRM Aero Composites Sdn. Bhd, Composites Technology City, Batu Berendam Melaka Malaysia Tel: Dr. Mohd Fadzli B. Abdollah P.hD. Thesis Supervisor Manager of COE, Centre for Advanced Research on Energy Faculty of Mechanical Engineering, Universiti Teknikal Malaysia, Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia. Tel: Fax:

Name: Ahmad Shahir bin Jamaludin. Phone number: / Personal motto: Educational Background:

A Name: Ahmad Shahir bin Jamaludin Address: Faculty of Manufacturing Engineering, Universiti Malaysia Pahang, Pekan Campus, 26600, Pekan, Pahang, Malaysia Phone number: 09-4245866 / 012-9148504 E-mail: