DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY MASTER SOETE LABORATORY
|
|
- Claud Mason
- 5 years ago
- Views:
Transcription
1 DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY MASTER SOETE LABORATORY
2 A work in which a student gives proof of analytical, independent, problem solving ability at an academic level, thereby showing to have applied obtained knowledge and skills. The work reflects the critical, research minded approach of the student.
3 Gaining information > 20 March 2017 Arrange appointments with supervisors and/or counsellors Detailed information Indicating 1 st, 2 nd, 3 rd choices 1 May 31 May 2017 Via Plato Finding compromise for highly desired thesis subjects Assignment of subject Before 1 July 2017 By education committee
4 Literature review Gaining basic knowledge / detailed knowledge Provided literature + own search for literature Critical interpretation of state-of-the-art Research methods and needs Experiments Small to large scale experiments with advanced measurement techniques Virtual experiments Thorough and timely planning! Analysis and reporting Literature versus experiments Reporting analyzing explaining (be critical!) Commonly meetings; obliged presentations
5 Work meetings Informal Possibly for partners (industry) Preparing (presentation, report, ) Planning + making arrangements! You take the initiative! Intermediate assignment English article Presentation of results Public with various backgrounds (laymen versus experts) Prepare and discuss in advance with guiding staff
6 Guidance committee Supervisor(s) and guiding assistants Daily work Regular meetings Obliged intermediate presentation after 1 st semester Examination committee Supervisor(s) & internal and external judges Dissertation Requirements w.r.t. layout, language, Public defense in last week of examination period Important for final grade!
7 30% 50% 20%
8 It can take two to tango
9 Engagement of company Research component Clear plan Own subject?
10 DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY EXPERIMENTAL FRICTION, WEAR AND LIFETIME MODELLING Soete Laboratory Experimental Tribology
11 Friction and Wear Modelling: Relevance of & Challenges Reliable Predictive Capabilities Lifetime estimation Design Optimization Performance and Reliability Custom Design Bearings, Gears, Cams Condition monitoring Potential Thesis Scopes Tailored to your interests Design and Construction of Test Setup Creative experimenting Modern Inspection and Measuring Technology Advanced Data Processing Model Development Target Candidate Profile Strong interest in Machine Components and Tribology Strong interest in Experimental Research Strong interest in Practical Applications Outspoken Practical Skills & Creative Responsible, Conscientious, Autonomous, Communicative.
12 DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY COMPUTATIONAL MODELLING OF THIN FILM LUBRICATION IN MACHINE COMPONENTS Soete Laboratory Computational Tribology
13 Lubrication Modelling: Relevance of & Challenges Reliable Predictive Capabilities Efficiency, Film Design Optimization Performance Custom Design Bearings, Gears, Cams Lubricant Selection & Evaluation Influence on System Dynamics & Damage Potential Thesis Scopes Tailored to your interests Surface roughness Active surface texturing Optimization Active surface texturing Elasto-Hydrodynamic Lubrication Dynamic Response behavior Target Candidate Profile Strong interest in Tribology and Lubrication Strong interest in scientific computing (Simulation, Programming, ) Motivated, open for intellectual challenges (research!) & creative Responsible, Conscientious, Autonomous, Communicative.
14 Total knee replacement Knee pain? Osteoarthritis? >2 million surgeries each year But still 20% of the patients dissatisfied! Biomechanical Orthopedic research group UGent Goal 1: Understand impact of knee replacement surgery 14
15 Cruciate ligament reconstruction Biomechanical Orthopedic research group UGent Goal 2: Improve knee replacement surgery Surgical navigation Bone cutting process Robotic control
16 DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY FINITE ELEMENT MODELLING OF FRETTING ISOGEOMETRICAL ANALYSIS OF STRUCTURES Soete Laboratory Finite element modelling research group
17 Finite element modelling of fretting Fretting wear Fretting fatigue
18 Isogeometric analysis of structures Isogeometric analysis
19 DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY EXPERIMENTAL AND NUMERICAL MODELLING OF FATIGUE LIFETIME AND FRACTURE RESISTANCE Soete Laboratory Fracture Mechanics
20 Fatigue lifetime in challenging circumstances Relevance & Challenges Different stages of fatigue damage (initiation, propagation) Translation of actual load spectrum to (virtual) lab conditions Accelerated fatigue testing (corrosion; gigacycle; ) Condition monitoring Potential Thesis Scopes Tailored to your interests Emphasis on creative experimental and/or numerical work Research on high strength steel or hybrid material connections Exceeding state-of-the-art in a challenging subject (effects of variable amplitude, environment, connections, ) Target Candidate Profile Strong interest in Fracture Mechanics Strong interest in practical applications Outspoken technical skills & creative Responsible, conscientious, autonomous, communicative.
21 Fracture of welded connections Relevance & Challenges Measurement and prediction of (un)stable crack extension Interaction between plasticity and fracture mechanics Complex aspects of welds (heterogeneity, weld flaws, ) Size effects of fracture Potential Thesis Scopes Tailored to your interests Emphasis on creative experimental and/or numerical work Close to the application (welds taken from the field) Exceeding state-of-the-art in a challenging subject (effects of weld specific features, severe deformation, ) 150 HV 300 Target Candidate Profile Strong interest in Fracture Mechanics Strong interest in practical applications Outspoken technical skills & creative Responsible, conscientious, autonomous, communicative.
22 See Technologiepark Zwijnaarde 904
Sustainable Construction & Design
Metal Structures Centre 2011 Sustainable Construction & Design Volume 2, 2011 Issue 2 Published by Laboratory Soete Ghent University Technologiepark 903 9052 Zwijnaarde Belgium http://www.tribology-fatigue.ugent.be/
More informationFINITE ELEMENT SIMULATIONS OF THE EFFECT OF FRICTION COEFFICIENT IN FRETTING WEAR
Proceedings of the 5 th International Conference on Fracture Fatigue and Wear, pp. 58-63, 216 FINITE ELEMENT SIMULATIONS OF THE EFFECT OF FRICTION COEFFICIENT IN FRETTING WEAR T. Yue and M. Abdel Wahab
More informationRight Angle Screwdriver
Right Angle Screwdriver October 12, 2009 Team: Scott Carpenter - Team Leader Chuck Donaldson - Communicator Nate Retzlaff - BWIG John McGuire - BSAC Client: Ashish Mahajan, MD Resident Plastic and Reconstructive
More informationFretting damage prediction of connecting rod of marine diesel engine
Journal of Mechanical Science and Technology 25 (2) (211) 441~447 www.springerlink.com/content/1738-494x DOI 1.17/s1226-1-126-6 Fretting damage prediction of connecting rod of marine diesel engine Jung
More informationA training course delivered at a company s facility by Matrix Engineering, an approved provider of Bolt Science Training
A training course delivered at a company s facility by Matrix Engineering, an approved provider of Bolt Science Training Following is an outline of the material covered in the training course. Each person
More informationGraduate Programme. Begin your rewarding career in engineering at the AMRC. amrc.co.uk
Graduate Programme Begin your rewarding career in engineering at the AMRC amrc.co.uk The University of Sheffield Advanced Manufacturing Research Centre with Boeing helps manufacturers of any size to become
More informationM.Tech in Machine Design
M.Tech in Machine Design Department of Mechanical Engineering The National Institute of Engineering Mysore-08 (Established in 1946) A Heritage of Excellence NIE Premier educational institutions in India
More informationGeneral Education Rubrics
General Education Rubrics Rubrics represent guides for course designers/instructors, students, and evaluators. Course designers and instructors can use the rubrics as a basis for creating activities for
More informationOpportunities in Mechanics Research
Opportunities in Mechanics Research National Science Foundation, Engineering Directorate Division of Civil, Mechanical, and Manufacturing Innovation Alexis C. Lewis Program Director Materials Engineering
More informationCOLLEGE OF ARTS AND SCIENCES COMMITTEE ON INSTRUCTION Minutes #6 October 23, Varner Hall MINUTES
Committee Approved on October 30, 2017 COLLEGE OF ARTS AND SCIENCES COMMITTEE ON INSTRUCTION Minutes #6 October 23, 2017 217 Varner Hall MINUTES Present: A. Banes-Berceli, G. Cassano, K. Castoldi, S. Dykstra,
More informationÓbuda University Donát Bánki Faculty of Mechanical and Safety Engineering. TRAINING PROGRAM Mechatronic Engineering MSc. Budapest, 01 September 2017.
Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering TRAINING PROGRAM Mechatronic Engineering MSc Budapest, 01 September 2017. MECHATRONIC ENGINEERING DEGREE PROGRAM CURRICULUM 1.
More informationSubject Index. Bearing damage, in bolted, composite-metal
STP927-EB/Nov. 1986 Subject Index A Adhesive binding, use in structural steel joints, 72-93 Adhesives creep strength, 76, 93 Versilok 204, 76 Aircraft crack failure in, 9-12, 37-38, 63-64, 95,118,222 crack
More informationThe role of inclination angle, λ on the direction of chip flow is schematically shown in figure which visualizes that,
EXPERIMENT NO. 1 Aim: To study of Orthogonal & Oblique Cutting on a Lathe. Experimental set up.: Lathe Machine Theoretical concept: It is appears from the diagram in the following figure that while turning
More informationComputer-Aided Drafting and Design Technology, A.A.S.
Johnson County Community College 1 Computer-Aided Drafting and Design Technology, A.A.S. Drafting technicians are engineering communication specialists who apply mathematics, computer applications and
More informationPERFECT SURFACES WORLDWIDE
A WELCOME FROM THE TECHNOLOGY LEADER in mass finishing Proverbial ingenuity, coupled with German efficiency and a love of perfection, are the best qualifications for developing successful ways of creating
More informationMechatronics. Bring the challenge. We ll build the solution.
Mechatronics Bring the challenge. We ll build the solution. VALUE-ADDED ENCODER ASSEMBLIES CUSTOMIZED ROTARY STAGES LINEAR AND CURVED STAGES VOICE COIL STAGES ROBOTIC JOINTS CUSTOMIZED ELECTRONICS, CABLING
More informationA TIMKEN COMPANY SUBSIDIARY
A TIMKEN COMPANY SUBSIDIARY Timken design and manufacturing excellence yields comprehensive aerospace solutions. Timken is innovative. Timken is collaborative. Timken is responsive. innovative For more
More informationEFFECT OF MACHINING PARAMETER ON SURFACE ROUGHNESS IN ROLLER BURNISHING OF ALUMINIUM ALLOY
EFFECT OF MACHINING PARAMETER ON SURFACE ROUGHNESS IN ROLLER BURNISHING OF ALUMINIUM ALLOY 1 Shital Lad, 2 Prof. Vijay Kurkute 1 Researcher, 2 Associate Professor 1,2 Department of Mechanical Engineering
More informationSubject Collection Engineering Catalogue Year 2014 Product ID ISSN Product USD Catalogue Price
Subject Collection Engineering Catalogue Year 2014 Product ID ISSN 00336 0001-4575 00310 0094-5765 05605 1874-1029 05618 0894-9166 05481 1570-8705 02007 1474-0346 02000 0965-9978 09001 1270-9638 10029
More informationMohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio OBJECTIVE EDUCATION RELEVANT COURSES PUBLICATIONS
Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio Email: mhaiba@yahoo.com OBJECTIVE To secure a challenging Academic / Technical position in the field of Mechanical Engineering
More informationIntroduction to SHAPE Removing barriers to HPC for SMEs
Introduction to SHAPE Removing barriers to HPC for SMEs Paul Graham, Software Architect EPCC, University of Edinburgh, UK PRACE SHAPE Coordinator p.graham@epcc.ed.ac.uk PRACEDays18, Ljubljana, Slovenia
More informationDYNAMIC STUDIES OF ROLLING ELEMENT BEARINGS WITH WAVINESS AS A DISTRIBUTED DEFECT
DYNAMIC STUDIES OF ROLLING ELEMENT BEARINGS WITH WAVINESS AS A DISTRIBUTED DEFECT by CHETTU KANNA BABU INDUSTRIAL TRIBOLOGY MACHINE DYNAMICS AND MAINTENANCE ENGINEERING CENTER Submitted in fulfillment
More informationCopper and Aluminium Wire Drawing Lubricants
Copper and Aluminium Wire Drawing Lubricants Copper and Copper Alloys BECHEM UNOPOL the worldwide recognized brand for highest performance Designed for highest lubrication and surface quality the BECHEM
More informationDevelopment and Integration of Artificial Intelligence Technologies for Innovation Acceleration
Development and Integration of Artificial Intelligence Technologies for Innovation Acceleration Research Supervisor: Minoru Etoh (Professor, Open and Transdisciplinary Research Initiatives, Osaka University)
More informationUNIVERSITY FACULTY OF. State of the
530577 TEMPUS 1 2012 1 RS TEMPUS JPCR http:// /iprod.masfak.ni.ac.rs iprod@ @masfak.ni.ac.rs Work package WP1: 1.2 REPORT UNIVERSITY OF KRAGUJEVAC FACULTY OF ENGINEERING State of the product development
More informationBiodynamics medical technology is the centre of excellence in the area of endoprosthetics and is specialised in joint implants and instruments.
2 3 Biodynamics medical technology is the centre of excellence in the area of endoprosthetics and is specialised in joint implants and instruments. CUSTOMER ORIENTATION AS A MATTER OF PRINCIPLE We stand
More informationAssessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit April 2018.
Assessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit 25-27 April 2018 Assessment Report 1. Scientific ambition, quality and impact Rating: 3.5 The
More informationA training course delivered at a company s facility by Matrix Engineering, an approved provider of Bolt Science Training
A training course delivered at a company s facility by Matrix Engineering, an approved provider of Bolt Science Training Following is an outline of the material covered in the training course. Each person
More informationComputer Sciences & Engineering Titles
Bapatla Engineering College :: Library Science Direct e-journals 2016 subscribed by the College Library. Computer Sciences & Engineering - 275 Titles S No ISSN Journal Title Imprint Specialization Subject
More informationMedical Robotics LBR Med
Medical Robotics LBR Med EN KUKA, a proven robotics partner. Discerning users around the world value KUKA as a reliable partner. KUKA has branches in over 30 countries, and for over 40 years, we have been
More informationProject Review: P1 (2)
Project Review: P1 (2) The investigator proposed a model-based control method utilizing techniques from continuousprocessing industries for the optimization of discrete-parts machining processes with multiple
More informationFOR IMMEDIATE RELEASE
FOR IMMEDIATE RELEASE Seco Tools AB Björnbacksvägen 2 73782 Fagersta Sweden Bettina PALMEN Phone: +49 211 2401-313 E-mail: bettina.palmen@secotools.com www.secotools.com Tribological wear analysis Fagersta,
More informationJUNIOR AUTOBIOGRAPHY
Student Name Date Completed JUNIOR AUTOBIOGRAPHY The responsibility of the College Counseling Office in preparing the Secondary School Report or Senior Profile, as we call it here at Thacher, is to provide
More informationSoFIA SOlutions pour la Fabrication Industrielle Additive métallique - Solutions for Industrial Metal Additive Manufacturing
SoFIA SOlutions pour la Fabrication Industrielle Additive métallique - Solutions for Industrial Metal Additive Manufacturing Contact : Claire Mathieu-André, Fives claire.mathieu-andre@fivesgroup.com -
More informationTranslational scientist competency profile
C-COMEND Competency profile for Translational Scientists C-COMEND is a two-year European training project supported by the Erasmus plus programme, which started on November 1st 2015. The overall objective
More informationUNIVERSITI TEKNOLOGI MARA WEAR CHARACTERIZATION BY OIL ANALYSIS IN AUTOMATIC AND MANUAL BUS ENGINE GEARBOX
UNIVERSITI TEKNOLOGI MARA WEAR CHARACTERIZATION BY OIL ANALYSIS IN AUTOMATIC AND MANUAL BUS ENGINE GEARBOX NORHANIFAH BINTI ABDUL RAHMAN Thesis submitted in fulfillment of the requirements for the degree
More informationArray Eddy Current for Fatigue Crack Detection of Aircraft Skin Structures
Array Eddy Current for Fatigue Crack Detection of Aircraft Skin Structures Eric Pelletier, Marc Grenier, Ahmad Chahbaz and Tommy Bourgelas Olympus NDT Canada, NDT Technology Development, 505, boul. du
More informationTESTING A BINARY CRACK SENSOR USING A LABORATORY MODEL OF CRACKS IN STEEL GIRDERS
CANSMART 2015: International Conference on Smart Materials and Structures SMN 2015: 5 th International Conference on Smart Materials and Nanotechnology in Engineering TESTING A BINARY CRACK SENSOR USING
More informationSKF Capital Markets Day Technology
SKF Capital Markets Day Technology Agenda Group Technology development GBLM - Generalized Bearing Life Model SKF Smartifying Industry / Industry 4.0 The customer is in charge application driven innovation
More informationCOMPUTER GAME DESIGN (GAME)
Computer Game Design (GAME) 1 COMPUTER GAME DESIGN (GAME) 100 Level Courses GAME 101: Introduction to Game Design. 3 credits. Introductory overview of the game development process with an emphasis on game
More informationCAREER PROFILES. Problem solving Organizational skills Time management Bilingual Management Self motivated Interpersonal Critical thinking Management
CAREER PROFILES Mechanical Engineering Technologist and Technicians: Mechanical Engineering Technologists and Technicians provide technical support and services or may work independently in mechanical
More informationCHAPTER-1 INTRODUCTION. S.No. Name of the Sub-Title Page No. 1.1 Introduction Manufacturing System Metal Cutting 4
1 CHAPTER-1 INTRODUCTION S.No. Name of the Sub-Title Page No. 1.1 Introduction 2 1.2 Manufacturing System 3 1.3 Metal Cutting 4 1.3.1 Independent Input Variables 4 1.3.2 Dependent Variables 6 1.3.3 Relations
More informationTribo-Condition Monitoring for optimized performance and longer service life
Tribo-Condition Monitoring for optimized performance and longer service life Pär Marklund Division of Machine Elements Luleå University of Technology, Sweden Introduction - Condition Monitoring * Condition
More informationMECHANICAL ENGINEERING
Kaunas University of Technology Faculty of Mechanical and Mechatronics MASTER STUDY PROGRAMME MECHANICAL ENGINEERING Assoc. Prof. Kęstutis Pilkauskas Faculty of Mechanical and Mechatronics The Faculty
More informationRESEARCH & DEVELOPMENT Dr. Mohsen Mohammadi PO Box 4400, 15 Dineen Drive Fredericton, New Brunswick Canada E3B 5A3 506)
RESEARCH & DEVELOPMENT Dr. Mohsen Mohammadi PO Box 4400, 15 Dineen Drive Fredericton, New Brunswick Canada E3B 5A3 506) 458-7104 mmohamm2@unb.ca COMMERCIALIZATION Dr. Craig Murphy 300 Union Street Saint
More informationWhat is Wire Rope? Understanding the Specifications and Construction
Monday, February 5, 2018 / Categories: Blog What is Wire Rope? Understanding the Specifications and Construction Wire rope is a complex piece of mechanical machinery with a number of different specifications
More informationAircraft Structure Service Life Extension Program (SLEP) Planning, Development, and Implementation
Structures Bulletin AFLCMC/EZ Bldg. 28, 2145 Monohan Way WPAFB, OH 45433-7101 Phone 937-255-5312 Number: EZ-SB-16-001 Date: 3 February 2016 Subject: Aircraft Structure Service Life Extension Program (SLEP)
More informationUSER MANUAL Nord-Lock X-series washers
USER MANUAL Nord-Lock X-series washers JOINT GUIDE 3 ASSEMBLY INSTRUCTIONS 4 TECHNICAL DATA 5 TORQUE GUIDE 5 THE EXCEPTIONAL SYSTEM THAT PREVENTS BOLT LOOSENING AND SLACKENING Nord-Lock X-series washers
More informationEXPERIMENTAL INVESTIGTION OF THE FRETTING PHENOMENON-DEPENDENCE OF NUMBERS CYCLES
EXPERIMENTAL INVESTIGTION OF THE FRETTING PHENOMENON-DEPENDENCE OF NUMBERS CYCLES ŞTEFAN GHIMIŞI, Constantin Brâncuşi University of Târgu Jiu, Romania,ghimisi@utgjiu.ro Abstract: Fretting damage is often
More informationTECHNOLOGY FOR SCIENTIFICAL ANIMAL HUSBANDRY
TECHNOLOGY FOR SCIENTIFICAL ANIMAL HUSBANDRY 1 2 OUR CUSTOMERS ARE COMMITTED TO WORKING TIRELESSLY IN THE FIGHT AGAINST DISEASES IN HUMANS AND ANIMALS, WHICH EITHER CAN T BE CURED OR FOR WHICH NO REMEDY
More informationDrilling solutions for Construction,Mining and Quarrying Industy
Drilling solutions for Construction,Mining and Quarrying Industy Product Range AGENDA 01 02 03 04 05 INTRODUCTION Our welcome Drill Tech International. MISSION, VISION Who we are and what we do. CORE
More informationMachine Elements & Mechanisms. Course Outcomes. Course Description. An applications course Uses a wide range of your background courses:
Machine Elements & Mechanisms An applications course Uses a wide range of your background courses: Statics & Dynamics Strength of Materials Materials and Processes Manufacturing Processes Fluid Mechanics
More informationVirtual Manufacturing Laboratory:
Virtual Manufacturing Laboratory: Desktop PC (Core i5)-3 nos. Software: 1. IGRIP Interactive Graphics Robot Instruction Programme. (Stratasys, Model-Objet. 30) 2. QUEST- Queuing vent Simulation (Deneb
More informationAIRCRAFT TECHNOLOGY PROGRAMME
AIRCRAFT TECHNOLOGY PROGRAMME 1 st SEMESTER BLT101 COMPUTER TECHNOLOGIES-I Examination of methods and techniques to access information and acquisition of skills to use them. Basic concepts of information
More informationSubsea Wellhead System Design for Fatigue Performance
Subsea Wellhead System Design for Fatigue Performance F. Justin Rodriguez 11 March 2015 11 March 2015 Subsea Drilling Services Introduction to Fatigue Mechanics of the failure Dislocations accumulate near
More informationAustrian Excellence Center for Tribology
Austrian Excellence Center for Tribology AC2T research GmbH Welcome in the world of friction, wear and lubrication research Copyright AC2T research GmbH 2017. All rights reserved. Reproduction of any material,
More informationWear Rings and Bearings. WPT Profile, Tight-Tolerance Piston Wear Ring. Technical Data
Wear Rings and Bearings Industrial Seal Inc. offers a complete line of wear rings and bearing products to fit any application. The product offering meets the full spectrum of needs, from heavy duty hydraulic
More informationSTUDY PLAN. Aerospace Control Engineering - master
STUDY PLAN Aerospace Control Engineering - master 120 ECTS Narvik Based on the document Vilkår for bruk av tilleggsbetegnelsen Sivilingeniør (siv.ing.) approved by The Norwegian Association of Higher Education
More informationPartner for FEM Competence in Detail
Simulation Calculation Dimensioning Strength Analysis Documentation Partner for FEM Competence in Detail Ingenieurgesellschaft für technische Berechnungen mbh 2 Competence as flexible service Business
More informationProject Areas : Project Associate
INDIRA GANDHI NATIONAL CENTRE FOR THE ARTS (An Autonomous Trust under the Ministry of Culture, Govt. of India) No.11 Man Singh Road, New Delhi-110001 The Indira Gandhi National Centre for the Arts (IGNCA),
More informationHigh Strength Weathering Steel Structural Bolting Assemblies PC 8.8 Hex. Cooper & Turner Ltd. Worldclass products for a.
Cooper & Turner Ltd Worldclass products for a worldwide market 2015 Cooper & Turner Ltd Sheffield Road Sheffield, S9 1RS South Yorkshire England United Kingdom T: +44 (0) 114 256 0057 E: sales@cooperadnturner.co.uk
More informationInternational Research Journal of Engineering and Technology (IRJET) e-issn: Volume: 02 Issue: 06 Sep p-issn:
Investigation of effectiveness of combined turning and burnishing operations performed on lathe machine on an aluminium alloy for the modification of surface texture Prafulla Chaudhari 1, Dr. G.K. Awari
More informationA training course delivered to Engineers and Designers, at a company s premises, on the technical aspects of bolting.
A training course delivered to Engineers and Designers, at a company s premises, on the technical aspects of bolting. Consulting Analysis Services Software Training An outline is presented below of the
More informationCONSUMABLES FOR HYDRAULIC BREAKERS. Working Tools and Chisel Paste. Construction Technique Service
CONSUMABLES FOR HYDRAULIC BREAKERS Working Tools and Chisel Paste Construction Technique Service CONTENTS It s more than just another piece of steel! 4 ProLine 6 ClassicLine 7 Working tool type 8 How to
More informationSustainable Construction & Design
13 February 2012 Sustainable Construction & Design Conference Proceedings Published by Laboratory Soete Ghent University Technologiepark 903 9052 Zwijnaarde Belgium http://www.tribology-fatigue.ugent.be/
More informationIntegrating Product Optimization and Manufacturability in Graduate Design Course
Session 2525 Integrating Product Optimization and Manufacturability in Graduate Design Course Mileta M. Tomovic Purdue University Abstract As CAD/FEA/CAM software tools are becoming increasingly user friendly
More informationDevelopments in Ultrasonic Guided Wave Inspection
Developments in Ultrasonic Guided Wave Inspection Wireless Structural Health Monitoring Technology for Heat Exchanger Shells using Magnetostrictive Sensor Technology N. Muthu, EPRI, USA; G. Light, Southwest
More informationPh.D : Technology & Science Fellowship available for meritorious Full-Time, candidates GATE / NET qualified Rs.
QS Ranking NAAC Accredited A Emerging Researchers with creative dynamism for promising innovations are invited to join Hindustan, a blossoming Deemed University with a rich heritage and commitment for
More informationMECHANICAL ENGINEERING
MECHANICAL ENGINEERING Prof.dr.ir. André de Boer Program director Mechanical Engineering Dr. Genie Stoffels Bachelor coordinator Mechanical Engineering 08/12/2016 1 CONTENT MASTER MECHANICAL ENGINEERING
More informationEvaluation of Haptic Virtual Fixtures in Psychomotor Skill Development for Robotic Surgical Training
Department of Electronics, Information and Bioengineering Neuroengineering and medical robotics Lab Evaluation of Haptic Virtual Fixtures in Psychomotor Skill Development for Robotic Surgical Training
More informationCATALOGUE. HBRP Publication
CATALOGUE HBRP Publication ARCHITECTURE Journal of Housing and Advancement in Interior Designing Є Housing Science and Management Є Computer Techniques in Architectural Design Є Construction Industry and
More informationNandadeep Door Frames
Advantages. Save Tree Save Nature. 1. Door frames are corrosion Resistant proof. 2. Door frames are Environmental friendly 3. Door frames are durable. 4. Door frames are fire resistant 5. Door frames are
More informationArts, Media and Entertainment Media and Design Arts Multimedia
CTE PROGRAM OF STUDY COMPLETED 2008-2009 Secondary & Post Secondary Industry Sector: Career Pathway: Program: Arts, Media and Entertainment Media and Design Arts Multimedia Levels Grade ELA Math Science
More informationThe presentation of the first-year Ph.D. students. Supervisor: doc. Ing. Martin Vrbka, Ph.D. Matúš Ranuša
The presentation of the first-year Ph.D. students Matúš Ranuša Supervisor: doc. Ing. Martin Vrbka, Ph.D. Institute of Machine and Industrial Design Faculty of Mechanical Engineering Brno University of
More informationArt & Science. Curriculum. Master programme Duration: 4 Semesters Programme Number:
Curriculum Master programme Duration: 4 Semesters Programme Number: 066 776 This is the English translation of the original German version. Only the latter is legally binding. Approved by the Senate of
More informationPRODUCTS & SERVICES GUIDE
PRODUCTS & SERVICES GUIDE IT S YOUR MOVE. 2 ROCKFORD BALL SCREW ABOUT US Ian McBain founded Rockford Ball Screw (RBS) in 1973 utilizing his years of experience in the industry with the goals of providing
More informationElizabethtown Area School District
Photography Course Number: 840 Grade Level: 10-12 Length of Course: 1 Semester Total Clock Hours: Length of Period: 80 minutes Date Written: 04-05 Periods per Week/Cycle: 5 Written By: Kevin Goss Credits
More informationMSc in Structural Integrity
MSc in Structural Integrity Why study in Structural Integrity at NSIRC? Introduction to NSIRC The National Structural Integrity Research Centre (NSIRC ) will be a state-of-the-art engineering facility
More informationRESEARCH PAPER CONDITION MONITORING OF SIGLE POINT CUTTING TOOL FOR LATHE MACHINE USING FFT ANALYZER
RESEARCH PAPER CONDITION MONITORING OF SIGLE POINT CUTTING TOOL FOR LATHE MACHINE USING FFT ANALYZER Snehatai S. Khandait 1 and Prof.Dr.A.V.Vanalkar 2 1 P.G.Student,Department of mechanical KDK College
More informationSprocket and Hub Bolt Analysis for Slip-Critical Bolted Applications in Mining and Mineral Processing Equipment
Title: Sprocket and Hub Bolt Analysis for Mining and Mineral Processing Case Study Section: FEA Keywords: Bolted joints, bolted connections, slip critical bolt design, bolt preload, FEA of bolted joints,
More informationFault Detection of Double Stage Helical Gearbox using Vibration Analysis Techniques
IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 08, 2016 ISSN (online): 2321-0613 Fault Detection of Double Stage Helical Gearbox using Vibration Analysis Techniques D.
More informationTechnology readiness evaluations for fusion materials science & technology
Technology readiness evaluations for fusion materials science & technology M. S. Tillack UC San Diego FESAC Materials panel conference call 20 December 2011 page 1 of 16 Introduction Technology readiness
More informationSubject: Best Practices for Improving Tafel Plots of High Capacitance Cells with Low Series Resistance
Technical Note Subject: Best Practices for Improving Tafel Plots of High Capacitance Cells with Low Series Resistance Date: April 2014 The PARSTAT4000 is designed with both function and versatility at
More informationTechnical Datasheet #0051. Extrusion cutter blade design Eight pointers to a better cut finish
Technical Datasheet #0051 Blade shape & position, thickness, width, length, and bevelling & sharpening - here s a look at the critical aspects of an area too often overlooked or else taken for granted.
More informationMultiparameter vibration analysis of various defective stages of mechanical components
SISOM 2009 and Session of the Commission of Acoustics, Bucharest 28-29 May Multiparameter vibration analysis of various defective stages of mechanical components Author: dr.ing. Doru TURCAN Abstract The
More informationLawrence A. Soltis, M. and Robert J. Ross, M. 1
REPAIR OF WHITE OAK GLUED-LAMINATED BEAMS Lawrence A. Soltis, M. and Robert J. Ross, M. 1 Abstract Connections between steel side plates and white oak glued-laminated beams subjected to tension perpendicular-to-grain
More informationCourse code Title Description Type
1st Semester 3М11OP01 3M21OM01 3M22OM01 3M23IND01 Mathematics for engineering Technical mechanics Materials and joining techniques Graphical communication 3M31IND01 Industrial design 1 Introduction to
More informationT Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic. Introduction. Contents. 1 Scope and field of application
T-26728 Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic Test, material and performance specifications Introduction This standard conforms where applicable to DIN 267 part 28, DIN 267 part
More informationTOOL WEAR AND TOOL LIFE
TOOL WEAR AND TOOL LIFE CONTENTS 4.1 Tool wear During the cutting operation, the cutting edge is stressed mechanically and thermally until it becomes completely blunt and unable to cut, 100 % wear occurs
More informationEffect of spindle speed and feed rate on surface roughness of Carbon Steels in CNC turning
Available online at www.sciencedirect.com Procedia Engineering 38 (2012 ) 691 697 International Conference on Modeling, Optimization and Computing (ICMOC 2012) Effect of spindle speed and feed rate on
More informationDegree Programme in Mechanical Engineering and Production Technology
Hämeen Ammattikorkeakoulu Degree Programme in Mechanical Engineering and Production Technology Mechanical Engineering and Production Technology graduates have a wide range of career choices around the
More informationAbout SIMTech Pre-requisites Benefits
About SIMTech The Singapore Institute of Manufacturing Technology (SIMTech) is a research institute of the Science and Engineering Research Council (SERC) of the Agency for Science, Technology and Research
More informationHigh pressure solutions for urea plants
2 3 Industrial Solutions Process Technologies Uhde High Pressure Technologies GmbH Buschmuehlenstr. 20 58093 Hagen, Germany P: +49 2331 967-0 F: +49 2331 967-370 www.uhde-hpt.com Industrial Solutions High
More informationPROGRAMME SYLLABUS Sustainable Building Information Management (master),
PROGRAMME SYLLABUS Sustainable Building Information Management (master), 120 Programmestart: Autumn 2017 School of Engineering, Box 1026, SE-551 11 Jönköping VISIT Gjuterigatan 5, Campus PHONE +46 (0)36-10
More informationFinite Element Modeling of Early Stage Self-loosening of Bolted Joints Haoliang Xu 1, a, Lihua Yang 1, b,, Lie Yu 1,2, c
International Conference on Information Sciences, Machinery, Materials and Energy (ICISMME 2015) Finite Element Modeling of Early Stage Self-loosening of Bolted Joints Haoliang Xu 1, a, Lihua Yang 1, b,,
More informationDesign and Fabrication of Special Purpose Tool Fixture for CNC Turrets
Design and Fabrication of Special Purpose Tool Fixture for CNC Turrets Prashanth P V 1 and Sachidananda H K 2* 1 Prashanth P V, PG student, Manufacturing Engineering and technology,school of engineering
More informationFretting Wear Failures In Bearing Steel EN31 Mated Against Structural Steel EN 24
Fretting Wear Failures In Bearing Steel EN31 Mated Against Structural Steel EN 24 R Ramesh and R Gnanamoorthy Department of Mechanical Engineering Indian Institute of Technology Madras CHENNAI 600 036
More informationJob Description. Commitment: Must be available to work full-time hours, M-F for weeks beginning Summer of 2018.
Research Intern Director of Research We are seeking a summer intern to support the team to develop prototype 3D sensing systems based on state-of-the-art sensing technologies along with computer vision
More informationJCHPS Special Issue 9: April Page 404
VIBRATION ANALYSIS OF DRIVE SHAFT WITH TRANSVERSE CRACK BY USING FINITE ELEMENT ANALYSIS Vigneshkumar Arumugam *, C.Thamotharan, P.Naveenchandran *Department of Automobile Engineering, Bharath University,
More informationASSEMIC : A European Project for Advanced Microhandling and - assembly
ASSEMIC : A European Project for Advanced Microhandling and - assembly Dr. Ana Almansa ASSEMIC Scientific Manager ARC Seibersdorf research GmbH Agenda Introduction: The project ASSEMIC Micropositioning
More information