BASED PRODUCT LIFE-CYCLE MODELLING

Transcription

1 BASED PRODUCT LIFE-CYCLE MODELLING

2 IFIP - The International Federation for Information Processing IFIP was founded in 1960 under the auspices of UNESCO, following the First World Computer Congress held in Paris the previous year. An umbrella organization for societies working in information processing, IFIP's aim is two-fold: to support information processing within its member countries and to encourage technology transfer to developing nations. As its mission statement clearly states, IFIP's mission is to be the leading, truly international, apolitical organization which encourages and assists in the development, exploitation and application of information technology for the benefit of all people. IFIP is a non-profitmaking organization, run almost solely by 2500 volunteers. It operates through a number of technical committees, which organize events and publications. IFIP's events range from an international congress to local seminars, but the most important are: The IFIP World Computer Congress, held every second year; open conferences; working conferences. The flagship event is the IFIP World Computer Congress, at which both invited and contributed papers are presented. Contributed papers are rigorously refereed and the rejection rate is high. As with the Congress, participation in the open conferences is open to all and papers may be invited or submitted. Again, submitted papers are stringently refereed. The working conferences are structured differently. They are usually run by a working group and attendance is small and by invitation only. Their purpose is to create an atmosphere conducive to innovation and development. Refereeing is less rigorous and papers are subjected to extensive group discussion. Publications arising from IFIP events vary. The papers presented at the IFIP World Computer Congress and at open conferences are published as conference proceedings, while the results of the working conferences are often published as collections of selected and edited papers. Any national society whose primary activity is in information may apply to become a full member ofifip, although full membership is restricted to one society per country. Full members are entitled to vote at the annual General Assembly, National societies preferring a less committed involvement may apply for associate or corresponding membership. Associate members enjoy the same benefits as full members, but without voting rights. Corresponding members are not represented in IFIP bodies. Affiliated membership is open to non-national societies, and individual and honorary membership schemes are also offered.

3 FEATURE BASED PRODUCT LIFE-CYCLE MODELLING IFlP TCS / WGS.2 & WGS.3 Conference on Feature Modelling and Advanced Design-for-the-Life-Cycle Systems (FEATS 2001) June 12-14,2001, Valenciennes, France Edited by Rene Soenen University Claude Bernard of Lyon France Gustav J. Oiling Daim/erChrysler Corporation USA " SPRINGER SCIENCE+BUSINESS MEDIA, LLC

4 Library of Congress Cataloging-in-Publication Data A C.I.P. Catalogue record for this book is available from the Library of Congress. Feature Based Product Life-Cycle Modelling Edited by Rene Soenen and Gustav J. Olling ISBN ISBN (ebook) DOI / Copyright 2003 by IFIP Springer International Science+Business Federation Media for Information New York Processing Originally published by Kluwer Academic Publishers in 2003 Softcover reprint of the hardcover 1 st edition 2003 Ali rights reserved. No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording, or otherwise, without written permission from the Publisher Springer Science+Business Media, LLC, with the exception of any material supplied specifically for the purpose ofbeing entered and executed on a computer system, for exclusive use by the purchaser of the work. Printed on acid-free paper.

5 The original version of the book frontmatter was revised: The copyright line was incorrect. The Erratum to the book frontmatter is available at DOI: / _11

6 Contents Contributors Acknowledgements Preface vii ix xi IX xiii Exploiting Integrated 'Product' & 'Life-Phase' Features 1 J. C. Borg and F. Giannini Feature-Based Virtual Engineering 19 G. Brunetti An Approach to Implement Feature-Based Applications Using Knowledge Aided Engineering Technology 41 F. Mandorli, C. Rizzi, L. Susca and U. Cugini Product Development with Multiple-View Feature Modelling 57 WF. Bronsvoort, A. Noort, J. van den Berg and G.F.M. Hoek Improving Design Productivity and Product Data Consistency 77 F. Giguere, L. Rivest and A. Desrochers Feature-Based Integration of Product, Process and Resources 93 S. Haasis, D. Frank, B. Rommel and M. Weyrich Product Model Based Multiple Viewpoint Information Sharing Using Features Technology 109 J. O. Canciglieri and R.l.M. Young A Hierarchical CAPP System Architecture for Die Cavity Machining 129 K. Ko, B.H. Kim, D.H. Kim and B.K. Choi

7 viii Tolerance Modeling Using the Feature Based Product Model for 147 Prediction of Used Parts Deterioration M. Matsuda, H. Suzuki and F. Kimura Product Recovery-Cycles Design: Extension of Useful Life F. Giudice, G. La Rosa and A. Risitano Erratum to: Feature Based Product Life-Cycle Modelling R. Soenen and G. J. Oiling Index 165 E1 187

8 Contributors van den BERG J., Delft University of Technology, The Netherlands BORG J.e., University of Malta, Malta BRONSVOORT W.F., Delft University of Technology, The Netherlands BRUNETTI G., Fraunhofer-Institut (IGD), Darmstadt, Germany CANCIGLIERI J.O., University of Parana, Curitiba, Brazil CHOI B.K., KAIST, Seoul, Korea CUGINI U., Politecnico di Milano, Italy FRANK D., DaimlerChrysler AG, Ulm, Germany GIANNINI F., CNR, Genova, Italy GIUDICE F., University of Catania, Italy HAASIS S., DaimlerChrysler AG, Ulm, Germany HOEK F.M., Delft University of Technology, The Netherlands KIM B.H., KIlT, Seoul, Korea KIM D.H., Wooyoung Co., Seoul, Korea KIMURA F., University of Tokyo, Japan KO K., KAIST, Seoul, Korea LA ROSA G., University of Catania, Italy MANDORLI F., University of Ancona, Italy MATSUDA M., Kanagawa Institute of Technology, Japan NOORT A., Delft University of Technology, The Netherlands RISIT ANO A., University of Catania, Italy RIZZI C., University of Parma, Italy ROMMEL B., DaimlerChrysler AG, Ulm, Germany SUSCA L., University of Parma, Italy SUZUKI H., Arthur D. Little, Japan WEYRICH M., DaimlerChrysler AG, Stuttgart, Germany YOUNG R.I.M., Loughborough University, United Kingdom

9 Acknowledgements IFIP CIRP IEEE IFAC EC-IST MR CNRS CR-NPDC GRAISYHM UVHC LAMIH futernational Federation for fuformation Processing TC5: Computer Applications in Technology WG 5.2: Computer Aided Design WG 5.3: Computer Aided Manufacturing futernational fustitution for Production Engineering Research fustitute of Electrical and Electronics Engineers SMC Society: Systems, Man and Cybernetics futernational Federation of Automatic Control TC-MIT: Advanced Manufacturing Technology TC-MIM: Manufacturing Modelling, Management and Control TC-SMC: Computer Aided Control Systems Design European Commission 1ST: fuformation Society Technologies Ministere de la Recherche Centre National de la Recherche Scientifique Conseil Regional Nord Pas de Calais Groupement de Recherche en Automatisation futegree et Systemes HommeslMachines Universite de Valenciennes et du Hainaut-Cambresis Laboratoire d' Automatique de Mecanique et d'fuformatique fudustrielles et Humaines (UMR CNRS UVHC n 8530)

10 Preface The customers of the twenty-first century are definitely demanding products that bring together innovation, quality, immediate availability, safety, low cost and even service. In that context, the design activity in charge of elaborating, evaluating and validating candidate products is faced with the complex problem of optimising upon the product's life cycle many conflicting parameters relating to heterogeneous points of view (functions, technology, machining, assembly, time to market, legal aspects, use, wear, global cost, environmental impact, etc.). Since the maturity of Computer Aided Design systems, feature modelling has been considered as a powerful means to characterise the product from various points of view. This book gathers a selection of contributions to the International IFIP Conference on Feature Modelling in Advanced Design-for-the-Life-Cycle Systems (FEATS 2001), which convened in Valenciennes, France in June 2001, providing a comprehensive state of the art and future trends about the use of feature technology in advanced design systems. DrD.DENEUX Chairman offeats'2001