(Construction) v5. Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
|
|
- Lewis Manning
- 5 years ago
- Views:
Transcription
1 Qualification : NVQ Diploma in Wood Occupations (Construction) v5 Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3: NVQ Diploma in Wood Occupations (Structural Post and Beam Carpentry) Pathway 4: NVQ Diploma in Wood Occupations (Light Structural Timber Framing) Pathway 5: NVQ Diploma in Wood Occupations (Timber Frame Erection) Pathway 6: NVQ Diploma in Wood Occupations (Timber Decks and Cladding) Pathway 7: NVQ Diploma in Wood Occupations (Heritage Site Carpentry) Pathway 8: NVQ Diploma in Wood Occupations (Heritage Architectural Joinery) Pathway 9: NVQ Diploma in Wood Occupations (Heritage Structural Post and Beam Carpentry) TQT (pathway 1): 60 TQT (pathway ): 410 TQT (pathway 3): 730 TQT (pathway 4): 570 TQT (pathway 5): 560 TQT (pathway 6): 540 for internal use only Mandatory units for all pathways 641 Conforming to general health, safety and welfare in the 1 64 Conforming to productive working practices in the 643 Moving, handling and storing resources in the Optional units for pathway 1 (Site Carpentry) THREE Units 09Av Installing first fixing components in the 10Av Installing second fixing components in the 11v Erecting structural carcassing components in the 1v Maintaining non-structural carpentry work in the 68v Wood Occs L NVQ Dip v Page 1 of V5
2 Mandatory unit for pathway (Architectural Joinery) 16Av3 Manufacturing routine architectural joinery products in the Optional units for pathway ONE Unit 14Av3 15Av3 68v Producing setting out details for routine architectural joinery products in the Marking out from setting out details for routine architectural joinery products in the Mandatory units for pathway 3 (Structural Post and Beam Carpentry) 30v Setting out timber framework in the 31v Fabricating timber framework in the 60v Assembling and erecting heavy timber framework post and beam in the Mandatory units for pathway 4 (Light Structural Timber Framing) 05v Installing frames and linings in the 1 08v Installing internal mouldings in the 1 1v Maintaining non-structural carpentry work in the 11v Confirming the occupational method of work in the 3 Wood Occs L NVQ Dip v Page of V5
3 Mandatory units for pathway 5 (Timber Frame Erection) 89v3 90v3 Erecting timber walls and floors in the Erecting timber roof structures in the Mandatory units for pathway 6 (Timber Decks and Cladding) 68v Optional units for pathway 6 ONE Unit 95v Installing sheeting and cladding systems on roofs and walls in the 69 Installing low level timber decks in the 630 Installing elevated timber decks in the 3 Additional units for pathway 5 (not compulsory) 40Av1 Slinging and hand signalling the movement of suspended loads in the Continued Wood Occs L NVQ Dip v Page 3 of V5
4 Mandatory units for pathway 7 (Heritage Site Carpentry) 30v Setting out timber framework in the 553 Conserving or restoring timber-based products in the Workplace 3 Optional units for pathway 7 THREE units 09Av Installing first fixing components in the 10Av Installing second fixing components in the 11v Erecting structural carcassing components in the 1v Maintaining non-structural carpentry work in the 68v Mandatory units for pathway 8 (Heritage Architectural Joinery) 16Av3 Manufacturing routine architectural joinery products in the 553 Conserving or restoring timber-based products in the Workplace 3 Optional units for pathway 8 ONE unit 14Av3 15Av3 68v Producing setting out details for routine architectural joinery products in the Marking out from setting out details for routine architectural joinery products in the Continued Wood Occs L NVQ Dip v Page 4 of V5
5 Mandatory units for pathway 9 (Heritage Structural Post and Beam) 30v Setting out timber framework in the 31v Fabricating timber framework in the 60v Assembling and erecting heavy timber framework post and beam in the 554 Conserving or restoring heavy duty timber framework in the 3 Wood Occs L NVQ Dip v Page 5 of V5
6 Unit endorsements for NVQ Diploma in Wood Occupations (Construction) unit Endorsement ref 95 One of the following endorsements required: Built-up systems Standing seam systems Secret fix systems Composite panel systems Fibre-cement systems 90 One of the following endorsements required: In situ roofs manually handled In situ roofs mechanically handled Pre-assembled roofs mechanically handled 40A The following endorsement is required (i.e. own area of work) Slinger signaller timber frame erection only 68 Three of the following endorsements required for cutting machines: Drill Planer Biscuit jointer Disc cutter Saw three of the following endorsements required: circular, chop, mitre, bench, jig, reciprocating, alligator or scroll PLUS Two of the following endorsements required for powered shaping machines: Thicknesser Sander Router Laminate trimmer Note: Where industry requests an Awarding Organisation to further endorse a unit, the Awarding Organisation must first seek approval from CITB (standards.qualifications@citb.co.uk) to ensure the endorsement is appropriate to the unit. Wood Occs L NVQ Dip v Page 6 of V5
(Construction) Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
Qualification : NVQ Diploma in Wood Occupations (Construction) Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3: NVQ
More informationRecommended Qualification Structure for Wood Occupations (Construction) Level 2
Recommended Qualification Structure for Wood Occupations (Construction) Level 2 This structure has been recommended by employers and stakeholders from the above occupational area for organisations to form
More information(Construction) Confirming work activities and resources for an occupational work area in the workplace
Qualification : NVQ Diploma in Wood Occupations (Construction) Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway : NVQ
More information(Construction) Minimum credit to be achieved at, or above, the level of the qualification: 53
Qualification Title: Level 3 NVQ Diploma in Wood Occupations (Construction) Pathway 1: Level 3 NVQ Diploma in Wood Occupations (Site Carpentry) Pathway 2: Level 3 NVQ Diploma in Wood Occupations (Architectural
More informationtransportable cutting and shaping machines in the workplace
Unit Update D/503/2408: SETTING UP AND USING TRANSPORTABLE CUTTING AND SHAPING MACHINES IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published
More informationWOODWORKING TOOLS. Saws Sanders and Planers Laminate Trimmer
WOODWORKING TOOLS. Saws Sanders and Planers Laminate Trimmer WOODWORKING TOOLS. ROUTER AND JIGS The router is ideal for rebating, grooving and recessing work in workshops or on-site. The jig is invaluable
More informationApprenticeshipsNI Level 2 Bench Joinery & Level 3 Bench Joinery
Level 2 Bench Joinery & Level 3 Bench Joinery in Bench Joinery combines the practical hands-on experience of the workplace with the knowledge and workshops. What will the student study? NVQ Level 2 Diploma
More informationTraditional Building Skills Training, Qualifications & Competency in the Built Heritage Sector
Traditional Building Skills Training, Qualifications & Competency in the Built Heritage Sector Seamus Hanna Specialist Projects & Development Manager CITB-ConstructionSkills Three Areas Covered: Traditional
More informationConstruction III Curriculum Maps
Curriculum Maps Unit 1: Shop Safety Unit 2: Shop Equipment and Tool Review Unit 3: Project I Unit 4: Building Plans and Materials Unit 5: Footings and Foundations Unit 6: Floor Framing Unit 7: Wall Framing
More information2017 British Woodworking Federation
2017 British Woodworking Federation Background The woodworking sector employs the highest ratio of apprentices in the construction sector. Apprenticeship reform opens up new opportunities for employing
More information1. Qualification specification
Qualification title: OAL Level 2 NVQ in Woodmachining Qualification number (QN): 603/0213/6 1. Qualification specification 1.1. Qualification purpose This qualification is designed to develop and assess
More informationEURTON ELECTRIC CO., INC.
DW100 DW101 DW106 DW106K 8032S 790402-00 HD Drill - VSR 8032S 790402-00 HD Drill 8032S 143803-00 HD Drill 8032S 143803-00 HD Drill DW514K 02-061 143803-00 HD Drill DW523K 02-061 790402-00 HD Drill - VSR
More informationLevel 1 Diploma in Plastering
Level 1 Diploma in Plastering The Level 1 Diploma in Plastering offers a good grounding in the practical skills and knowledge designed to prepare the trainee for entry into the trowel trades and the construction
More informationCARPENTRY AND JOINERY
EXAMINATION SCHEME CARPENTRY AND JOINERY There will be three papers, Papers 1, 2 and 3, all of which must to be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. Paper 1: Paper
More informationNational Certificate in Wood Product Manufacturing (Level 3)
NQF Ref 0815 Version 3 Page 1 of 10 National Certificate in Wood Product (Level 3) Level 3 Credits 80 This qualification is expiring. The last date to meet the requirements is 31 December 2011. Purpose
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 FOLLOW RULES FOR WORKING IN THE CABINETMAKING LAB. 101 Review and discuss school rules. 102 Review and demonstrate knowledge of cabinetmaking lab rules. 103 Complete all theory
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State
More informationPerkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationABC Level 2 Certificate in Footwear and Leather (NVQ) (500/6572/5)
Purpose Statement ABC Level 2 Certificate in Footwear and Leather (NVQ) (500/6572/5) ABC Awards is at the forefront of developments within the fashion and textiles sector and has a suite of vocational
More informationPRACTICAL TASK MANUAL
6706-28 Level 2 Diploma in Wood Machining for Joinery Manufacture PRACTICAL TASK MANUAL July 2014 Version 1.0 Contents Candidate details 2 Unit assessment overview 3 Practical task completion record 3
More informationST. PATRICK S COLLEGE SILVERSTREAM. BCATS Level
ST. PATRICK S COLLEGE SILVERSTREAM BCATS Level 2-2015 Building Construction and Allied Trades Skills Course Handbook This book with be used throughout the course as a source of information and as a record
More informationArrangements for: Professional Development Awards. at SCQF level 7
Arrangements for: Professional Development Awards at SCQF level 7 G9PM 47: Bricklaying G9R1 47: Carpentry and Joinery G9PN 47: Painting and Decorating G9P6 47: Plastering G9R2 47: Roof Slating and Tiling
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1504 Version 2 Page 1 of 14 National Certificate in Furniture (Level 4) with strands in Furniture Design and Markets, Craft Finisher, Machine Setter, Furniture Maker, Advanced Upholstery, and
More informationOverview and Working Conditions of the Carpentry and Joinery Trades
Youth Explore Trades Skills Overview and Working Conditions of the Carpentry and Joinery Trades Description There are two fields of woodworking trades within the construction industry in British Columbia:
More informationPOS Perkins Statewide Articulation Agreement Documentation Coversheet
POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL
More informationPortable circular saw Used to cut a wide range of construction materials Check the cord, leads and 3 pin plugs for any damage. A Residual Current Device (RCD) is plugged into the power source. Do not stand
More informationMaterials Design and Technology
Materials Design and Technology Resource list Multimedia 2011/31465[v2] Materials Design and Technology: Resource list Multimedia 1 Copyright School Curriculum and Standards Authority, 2012 This document
More informationPerfect Machines Center
+91-8048603597 Perfect s Center https://www.perfectmachinescentre.in/ We have emerged as an eminent manufacturer and distributor of workshop machinery like heavy duty lathe machines, universal milling
More informationTitle: Construct and install straight flight stairs Level: 4 Credits: 10
Unit ID: 1606 Domain CARPENTRY Title: Construct and install straight flight stairs Level: 4 Credits: 10 Purpose This unit standard specifies the competencies required to construct and install straight
More informationPRACTICAL TASK MANUAL
6706-13 Level 1 Diploma in Carpentry and Joinery September 2013 Version 1.1 PRACTICAL TASK MANUAL Contents Task manual amendments 1 Candidate details 2 Unit assessment overview 3 Practical task completion
More informationFACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK
More informationEL DORADO UNION HIGH SCHOOL DISTRICT Educational Services. Course of Study Information Page
Course of Study Information Page Course Title: Woodworking and Carpentry #0520 Rationale: This is an introduction into the world of woodworking where the student will learn the basics of cabinetmaking,
More informationHornsby Woodworking Men s Shed. Guide to the Shed s Woodworking Machines
Guide to the Shed s Woodworking Machines SP00 Purpose The primary purpose of this document is to assist the induction of new members of the Hornsby Woodworking Men s Shed in the identification and understanding
More informationConstruction Building (Wales)
Construction Building (Wales) IMPORTANT NOTIFICATION FOR ALL APPRENTICESHIP STARTS FROM 14 OCTOBER 2016 Modifications to SASW came into effect on 14 October 2016. These changes relate to the Essential
More informationConstruction Building (England)
Construction Building (England) IMPORTANT NOTIFICATION FOR ALL APPRENTICESHIP STARTS FROM 22 AUGUST 2017 Modifications to SASE came into effect on 22 August 2017. Accordingly, SASE publication DFE-00167-2017
More informationLevel 3 Diplomas in Furniture Restoration, Installation, Design & Making, Furnishings and Wood Machining (5780) August 2017 Version 2.
QUALIFICATION HANDBOOK Level 3 Diplomas in Furniture Restoration, Installation, Design & Making, Furnishings and Wood Machining (5780) August 2017 Version 2.3 Qualification at a glance Subject area City
More informationStrands & Standards CONSTRUCTION TRADES FOUNDATION
Strands & Standards CONSTRUCTION TRADES FOUNDATION COURSE DESCRIPTION A course that generally prepares individuals in the following areas: basic safety, introduction to blueprint reading, introduction
More informationSecondary Wood Products Manufacturing 2015
Secondary Wood Products Manufacturing 2015 Forest Industry Sectors Tertiary Primary Secondary Forest Industry Sectors Tertiary Secondary Primary Primary Sector Sawmilling Pulp and paper Composite panel
More informationLevel 3 Diploma in Site Carpentry ( ) July 2014 Version 2.2
Level 3 Diploma in Site Carpentry (6706-33) QUALIFICATION HANDBOOK July 2014 Version 2.2 Qualification at a glance Subject area Construction City & Guilds number 6706-33 Age group approved 16-18, 19+ Entry
More informationCarpentry. Full Time
Full Time Cabinet Maker Manufacturing Job Number: 3643 Shop Production Worker Installer Millwork Hours/Days: Monday-Friday Salary: $16.00/hr. Requirements: Los Angeles, CA Skills Requirements: Minimum
More informationPaul: Evolving workshop needs Neville: Setting up a small workshop Paul: Setting up a medium-sized workshop
Paul: Evolving workshop needs Neville: Setting up a small workshop Paul: Setting up a medium-sized workshop Presentations will be available on the Association s website www.ptawoodworkers.com Interest
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: BUC 110 (2007-1) Identifier is the postsecondary course prefix followed by Plan-of- Instruction
More informationPRACTICAL TASK MANUAL
6706-33 Level 3 Diploma in Site Carpentry November 2013 Version 1.3 PRACTICAL TASK MANUAL Contents Task manual amendments 2 Candidate details 3 Unit assessment overview 4 Practical task completion record
More informationPRACTICAL TASK MANUAL
6806-37 Diploma in Shopfitting Joinery at SCQF Level 6 PRACTICAL TASK MANUAL September 2014 Version 1.0 Contents Candidate details 1 Unit assessment overview 2 Practical task completion record 2 Instructions
More informationBAA ADVANCED JOINERY FRAMEWORK 12
BAA ADVANCED JOINERY FRAMEWORK 12 DISTRICT NAME: Coquitlam DISTRICT NUMBER: SD#43 DEVELOPED BY: Dave Jones DATE DEVELOPED: April 20, 2006 SCHOOL NAME: Dr. Charles Best PRINCIPAL S NAME: Brian Fichter BOARD/AUTHORITY
More informationGrades 9 to 12 Carpentry. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Manitoba Technical-Vocational Curriculum Framework of G r a d e s 9 t o 1 2 C a r p e n t r y Manitoba Technical-Vocational Curriculum Framework of 2013 Manitoba Education Manitoba Education
More informationVCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2012 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET FURNISHING (CABINET MAKING) Written examination Section Monday 12 November
More informationGable Roof Pavilions
Wood Pavilions Gable Roof Pavilions Pitch & Taper Framing Wood PTC Beams Tube Steel Columns Prime-painted Steel Wood Columns Stain Multiple s Available 4:12 Pitch Truss Framing Wood Trusses Tube Steel
More informationLOT QTY DESCRIPTION NOTE 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC
1 CONTENTS LOFT OFFICE INCLUDING P.C, DESKS, CHAIRS, ETC 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC 3 TURNED TIMBER BALUSTRADE, METAL BALUSTRADE & TIMBER STOCKS 4
More information23 WOODWORKING EQUIPMENT
23 WOODWORKING EQUIPMENT Chisel Mortiser Chisel mortiser... 1199 Cutting Machine Heavy duty band saw... 1197 Scroll saw... 1197 Dust Collector Dust collector... 1201 Overarm Router Overarm router... 1202
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit number- D2WH 04 -Unit title- CARPENTRY AND JOINERY: TIMBER STAIRS WITH TAPERED STEPS -Superclass category-
More informationPergola. How To Build A. ***Safety First*** Please read the section on workplace safety at the end of this manual before proceeding with any work.
How To Build A Pergola ***Safety First*** Please read the section on workplace safety at the end of this manual before proceeding with any work. How To Build A Pergola Pergolas can be built to many different
More informationLesson Plan. Overall aims of session. Assessment strategies How will you & the learners know they have (fully/partly/not) achieved the objectives?
Lesson Plan Tutor: A Chippy Room Number: Programme: Up-skilling Date: Course code & title: Joinery Up-skilling Session Title: Joinery Up-skilling Course duration: 19.5 hours (3 days) Attendance: 9am to
More informationUNIT Construction Crafts: Bench Joinery (Intermediate 2)
National Unit Specification: general information CODE DX0J 11 COURSE Construction Crafts (Intermediate 2) SUMMARY This Unit is a mandatory Unit within the Intermediate 2 Construction Crafts Course and
More informationCABINETMAKING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with cabinetmaking or millwork as the occupational objective.
CABINETMAKING PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of cabinetmaking and millwork. GENERAL
More informationNational Certificate in Furniture (Manufacturing Upholstery) (Level 2)
NQF Ref 0621 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery) (Level 2) Level 2 Credits 63 This qualification is expiring. The last date to meet the requirements is 31
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: CAR 111 & CAR 114 (2006-1) Identifier is the postsecondary course prefix followed by Plan-of-
More informationBENCH MORTICER. Woodworking Equipment Bench Morticer with Sliding Table. trade level
BENCH MORTICER 01944 Bench Morticer with Sliding Table A compact bench mounted morticer giving high levels of accuracy, ease of use with industrial features at an affordable price. An important feature
More informationConstruction Trades Foundation
PRECISION EXAMS Construction Trades Foundation EXAM INFORMATION Items 65 Points 82 Prerequisites NONE Grade Level 10-12 Course Length ONE YEAR DESCRIPTION This course will focus on the foundation of construction
More informationPassaic County Technical Institute CARPENTRY II JANUARY 2004
Passaic County Technical Institute CARPENTRY II JANUARY 2004 CARPENTRY II I. DESCRIPTION Carpentry two is a full year course which is intended to introduce the student to the proper and safe use of materials,
More informationSALE LISTING of HAND TOOLS etc
Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 22 nd September 2018 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery
More informationTimber construction. Overview of products and applications. Carpentry portable circular saw HK 132
332 Overview of products and applications 334 Sword saws SSU 200, IS 330 Carpentry portable circular saw HK 132 Hand-held planer PL 205, PL 245 Chain mortiser CM 150 335 337 338 339 Accessories and consumable
More informationPRACTICAL TASK MANUAL
6706-36 Level 3 Diploma in Bench Joinery August 2013 Version 1.1 PRACTICAL TASK MANUAL Contents Task manual amendments 1 Candidate details 2 Unit assessment overview 3 Practical task completion record
More informationLevel 3 Diploma in Bench Joinery ( ) July 2014 Version 2.2
Level 3 Diploma in Bench Joinery (6706-36) QUALIFICATION HANDBOOK July 2014 Version 2.2 Qualification at a glance Subject area Construction City & Guilds number 6706-36 Age group approved 16-18, 19+ Entry
More informationWAEC Sample Questions and Schemes - Uploaded online by WOODWORK
SCHEME OF EXAMINATION WOODWORK There will be three papers, Papers 1, 2 and 3 all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. PAPER 1: Will consist of forty
More informationFOLDING MITRE SAW STAND MODEL NO: CFMSS1
CFMSS1 Folding Mitre Saw Stand (080602-1).fm Page 1 Monday, November 7, 2011 3:48 PM FOLDING MITRE SAW STAND MODEL NO: CFMSS1 PART NO: 6500968 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 CFMSS1 Folding
More informationCabinetmaking PRECISION EXAMS
PRECISION EXAMS Cabinetmaking EXAM INFORMATION Items 72 Points 74 Prerequisites WOODWORKING Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION The third instructional course in a sequence of courses
More informationExperienced Worker Assessment Blueprint Carpentry
Blueprint Carpentry Test Code: 0207 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Hand Tools Use and maintain fastening and prying tools Use and maintain sawing and cutting
More informationMaterials, tools and processes
Materials, tools and processes Extension material for Level 1 Design and Visual Communication Study Guide ISBN 978-1-877459-02-3, Page 153 Tools Tools are used to work materials to improve their appearance,
More informationPRACTICAL TASK MANUAL
6706-23 Level 2 Diploma in Site Carpentry August 2013 Version 1.1 PRACTICAL TASK MANUAL Contents Task manual amendments 1 Candidate details 2 Unit assessment overview 3 Practical task completion record
More informationTable of Contents for Tools and Prices:
Table of Contents for Tools and Prices: Air Compressor & NAilers....pAge 3-4 CompACtors......pAge 5 CoNCrete tools & mixers... page 5 generator & Welder.... page 5 HANd tools.......page 6 Home, lawn, &
More informationWoodworking. EXAM INFORMATION Items. Points. Prerequisites. Grade Level. Course Length EXAM BLUEPRINT. Career Cluster. Performance Standards
EXAM INFORMATION Items 66 Points 66 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING Performance Standards INCLUDED Certificate
More informationSEMPEO SQA Unit Code FP42 04 Producing Composite Mouldings using Wet Lay-up Techniques
Producing Composite Mouldings using Wet Lay-up Techniques Overview This standard covers a broad range of basic competences that you need to produce composite mouldings using wet-lay up laminating techniques.
More informationBCHS Curriculum Map
Department Design Technology Year 10 Qualification Construction BCHS Curriculum Map 2016-2017 Autumn 1 Autumn 1 Unit 6: Exploring Carpentry Joinery Principles Techniques. Assignment 1 Introduction to unit
More informationCarpentry Level 1, 2014
A Correlation of Carpentry Level 1, Utah Core Curriculum for Resource Title: Carpentry Publisher: Pearson Education publishing as Prentice Hall ISBN: SE: 9780133403800 Media (text, software, internet,
More informationENGINEERED BUILDING PRODUCTS. SplitHanger. mitek.com.au
ENGINEERED BUILDING PRODUCTS SplitHanger mitek.com.au S p l i t H a n g e r SUITABLE FOR VARIOUS WIDTHS OF TIMBER BEAM APPLICATION: SplitHangers are versatile hangers that provide a heavy duty connection
More informationMeasuring What Matters in. Job Ready Assessment Blueprint. Cabinetmaking
Measuring What Matters in Job Ready Assessment Blueprint Cabinetmaking Test Code: 3014 / Version: 01 Copyright 2010 General Assessment Information Blueprint Contents General Assessment Information Written
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2018.
NZQF NQ Ref 1310 Version 5 Page 1 of 8 National Certificate in Wood Fibre Manufacturing (Wood Panels) with strands in Composite Panel Manufacturing, Overlay Bonding, and Laminated Veneer Lumber (LVL) and
More informationProducing and finishing holes using drilling machines
Unit 336 Producing and finishing holes using drilling machines UAN: Level: 3 Credit value: 14 GLH: 56 Relationship to NOS: Endorsement by a sector or regulatory body: Aim: Y/601/2264 This unit has been
More informationLevel 3 Advanced Technical Diploma in Site Carpentry (450) ( )
Level 3 Advanced Technical Diploma in Site Carpentry (450) (7906-30) Version 1.0 Practice Tasks Level 3 Advanced Technical Diploma in Site Carpentry [7906-30] Introduction General information about structure
More informationNational Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3)
NQF Ref 0619 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3) Level 3 Credits 59 This qualification is expiring. The last date to meet the requirements
More informationBrick : Air Compressors Portable
Brick 10003555: Air Compressors Portable Includes any products that may be described/observed as a compressor that takes in air at atmospheric pressure and delivers it at a higher pressure. Relatively
More informationRelease 2. MSF31113 Certificate III in Cabinet Making
Release 2 MSF31113 Certificate III in Cabinet Making MSF31113 Certificate III in Cabinet Making Modification History Release 2 - One unit title corrected for MSFFM3010. No change in outcomes. Release 1
More informationCATALOGUE WOOD WORKING JET HAS 50 YEARS EXPERIENCE IN WOOD WORKING MACHINES SOLID CONSTRUCTION FOR ACCURACY AND LONG LIFE
Jet products are Swiss customised and built to a high standard of accuracy. Cast iron construction ensures a lifetime of reliable performance WOOD WORKING CATALOGUE JET HAS 50 YEARS EXPERIENCE IN WOOD
More informationMake a cupboard as a BCATS
National Certificate in Building, Construction, and Allied Trades Skills (BCATS) Make a cupboard as a BCATS project Unit Standard 25921 Level 2, Credit 6 Name: Contents Reference Page What you need to
More information2016 HSC Industrial Technology Timber Products and Furniture Technologies Marking Guidelines
2016 HSC Industrial Technology Timber Products and Furniture Technologies Marking Guidelines Section I Multiple-choice Answer Key Question Answer 1 A 2 D 3 A 4 B 5 C 6 C 7 D 8 D 9 B 10 B 1 Section II Question
More informationJOINERY: PANEL JOINTS
PANEL JOINTS Making Wood Wider: The Rubbed Joint... 890 Making Wood Wider: Cramped Joints and Thin Wood... 893 In the Workshop: Glued Joints... 895 Edge Jointing... 898 Edge Jointing (Continued)... 901
More informationTimed Online Auction
Timed Online Auction Woodworking Machinery and Equipment Due to Retirement Simon Kohn Furniture Limited Simon Kohn Furniture Limited has been trading since 1978 building a reputation for fine cabinet making
More informationEnvironmentally Responsible Panel Manufacture
P.O. Box 726 Winder Georgia 30680 (770) 868-1423 Fax (770) 868-1325 www.atlantasunbelt.com Environmentally Responsible Panel Manufacture Sets a new benchmark in environmentally responsible panel manufacture.
More informationAll About Construction Issue 11 February 2019
All About Construction Issue 11 February 2019 A newsletter from City & Guilds on professional and technical education updates in construction for all nations. In this issue: New Industry Manager for construction
More informationFurniture Manufacturer - Level 2
Furniture Manufacturer - Level 2 Occupational Profile The Furniture, Furnishings and Interiors industry is of significant importance to the UK economy, particularly in the supply of end products for residential
More informationCactus Routed Bowl. MLCS Items Needed:
Cactus Routed Bowl MLCS Items Needed: Cactus Bowl and Tray Template #9188 Top Mounted Bearing Dish Cutter Router Bit #7817 1/2 Router Collet Extension and Wrenches #9465 45* Degree Chamfer Bit #7676 1-3/8
More informationVOLUNTEER APPLICATION 2018
WV VOAD 2700 E. Dupont Ave., Suite 14 Belle, WV 25015 Dear Volunteer, Thank you for your interest in volunteering with West Virginia Voluntary Organizations Active in Disaster (WV VOAD). Please read carefully
More informationMatch the tool with its name.
Handyperson Special Index Activity Page Match the tool with its name. Hammer Drill Nail Screw Nut Level Ladder Pliers Wrench Screwdriver Measuring Tape Tool Time Word Search BOARD BOLT BRICK CEMENT CONSTRUCTION
More informationChili Pepper Routed Bowl
Chili Pepper Routed Bowl MLCS Items Needed: Chili Pepper Bowl and Tray Template #9189 Top Mounted Bearing Dish Cutter Router Bit #7817 1/2 Router Collet Extension and Wrenches #9465 3/16 Radius Round Over
More informationPRESSURE WASHER GENERATOR SANDER BENCH GRINDER
MACHINERY/S E-001-086 2066-0 5.5 HP 4 - Stroke Engine E-001-084 2067-0 5.5 HP OHV E-001-095 2068-0 6.5 HP OHV E-01-100 2061-0 3500W Portable Generator, 4000W peak power, 196cc OHV engine GENERATOR E-001-222
More informationReplicate/restore wooden components of furniture
Replicate/restore wooden components of furniture Overview This standard addresses the competence required to make wooden components for hand-crafted furniture. This involves: 1 cutting, shaping and moulding
More informationPurepanel Plus Environmentally Responsible Board Manufacture
Purepanel Plus Environmentally Responsible Board Manufacture Purepanel Plus Sets a new benchmark in environmentally responsible board manufacture. P+ is a precision engineered structural quality board
More informationOnGuard ACEProPLUS Product Guide
OnGuard ACEProPLUS Product Guide Training Units listed by Curriculum Pack Our OnGuard ACEProPLUS program is designed to specifically meet the needs of the Australian education sector. Additional curriculum
More information