(Construction) Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
|
|
|
- Tamsyn Charles
- 5 years ago
- Views:
Transcription
1 Qualification : NVQ Diploma in Wood Occupations (Construction) Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3: NVQ Diploma in Wood Occupations (Structural Post and Beam Carpentry) Pathway 4: NVQ Diploma in Wood Occupations (Light Structural Timber Framing) Pathway 5: NVQ Diploma in Wood Occupations (Timber Frame Erection) Pathway 6: NVQ Diploma in Wood Occupations (Timber Decks and Cladding) Pathway 7: NVQ Diploma in Wood Occupations (Heritage Site Carpentry) Pathway 8: NVQ Diploma in Wood Occupations (Heritage Architectural Joinery) Pathway 9: NVQ Diploma in Wood Occupations (Heritage Post and Beam Carpentry) TQT value (pathway 1):60 TQT value (pathway ):410 TQT value (pathway 3):730 TQT value (pathway 4):570 TQT value (pathway 5):560 TQT value (pathway 6):540 TQT value (pathway 7): 110 TQT value (pathway 8): 730 TQT value (pathway 9): 1050 for internal use only Mandatory units for all pathways 641 Conforming to general health, safety and welfare in 1 64 Conforming to productive working practices in 643 Moving, handling and storing resources in Continued. NVQ-Wood Occs Dip L v Page 1 of V5
2 Optional units for pathway 1 (Site Carpentry) THREE Units 09Av Installing first fixing components in 10Av Installing second fixing components in 11v Erecting structural carcassing components in 1v Maintaining non-structural carpentry work in 358v3 68v Installing fire resisting timber door assemblies and doorsets in the Setting up and using transportable cutting and shaping machines in Mandatory unit for pathway (Architectural Joinery) 16Av4 Manufacturing routine architectural joinery products in Optional units for pathway ONE Unit 14Av3 15Av3 68v Producing setting out details for routine architectural joinery products in Marking out from setting out details for routine architectural joinery products in Setting up and using transportable cutting and shaping machines in Mandatory units for pathway 3 (Structural Post and Beam Carpentry) 30v Setting out timber framework in 31v Fabricating timber framework in 60v Assembling and erecting heavy timber framework post and beam in NVQ-Wood Occs Dip L v Page of V5
3 Mandatory units for pathway 4 (Light Structural Timber Framing) 05v Installing frames and linings in 1 08v Installing internal mouldings in 1 1v Maintaining non-structural carpentry work in 11v Confirming the occupational method of work in 3 Mandatory units for pathway 5 (Timber Frame Erection) 89v3 90v3 Erecting timber walls and floors in Erecting timber roof structures in Mandatory units for pathway 6 (Timber Decks and Cladding) 68v Setting up and using transportable cutting and shaping machines in Optional units for pathway 6 ONE Unit 95v Installing sheeting and cladding systems on roofs and walls in the 69 Installing low level timber decks in 630 Installing elevated timber decks in 3 Additional units for pathway 5 (not compulsory) (credit value: n/a) 40Av1 Slinging and hand signalling the movement of suspended loads in Continued.. NVQ-Wood Occs Dip L v Page 3 of V5
4 Mandatory units for pathway 7 (Heritage Site Carpentry) 30v Setting out timber framework in 553 Conserving or restoring timber-based products in 3 Optional units for pathway 7 THREE units 09Av Installing first fixing components in 10Av Installing second fixing components in 11v Erecting structural carcassing components in 1v Maintaining non-structural carpentry work in 68v Setting up and using transportable cutting and shaping machines in the Mandatory units for pathway 8 (Heritage Architectural Joinery) 16Av4 Manufacturing routine architectural joinery products in 553 Conserving or restoring timber-based products in 3 Optional units for pathway 8 ONE unit 14Av3 15Av3 68v Producing setting out details for routine architectural joinery products in Marking out from setting out details for routine architectural joinery products in Setting up and using transportable cutting and shaping machines in the Continued NVQ-Wood Occs Dip L v Page 4 of V5
5 Mandatory units for pathway 9 (Heritage Post and Beam) 30v Setting out timber framework in 31v Fabricating timber framework in 60v Assembling and erecting heavy timber framework post and beam in the 554 Conserving or restoring heavy timber framework in 3 NVQ-Wood Occs Dip L v Page 5 of V5
6 Unit endorsements for NVQ Diploma in Wood Occupations (Construction) unit Endorsement ref 95 One of the following endorsements required: Built-up systems Standing seam systems Secret fix systems Composite panel systems Fibre-cement systems 90 One of the following endorsements required: In situ roofs manually handled In situ roofs mechanically handled Pre-assembled roofs mechanically handled 40A The following endorsement is required (i.e. own area of work) Slinger signaller timber frame erection only 68 Three of the following endorsements required for cutting machines: Drill Planer Biscuit jointer Disc cutter Saw three of the following endorsements required: circular, chop, mitre, bench, jig, reciprocating, alligator or scroll PLUS Two of the following endorsements required for powered shaping machines: Planner Sander Router Laminate trimmer Note: Where industry requests an Awarding Organisation to further endorse a unit, the Awarding Organisation must first seek approval from CITB (standards.qualifications@citb.co.uk) to ensure the endorsement is appropriate to the unit. NVQ-Wood Occs Dip L v Page 6 of V5
(Construction) v5. Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
Qualification : NVQ Diploma in Wood Occupations (Construction) v5 Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3:
Recommended Qualification Structure for Wood Occupations (Construction) Level 2
Recommended Qualification Structure for Wood Occupations (Construction) Level 2 This structure has been recommended by employers and stakeholders from the above occupational area for organisations to form
(Construction) Confirming work activities and resources for an occupational work area in the workplace
Qualification : NVQ Diploma in Wood Occupations (Construction) Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway : NVQ
(Construction) Minimum credit to be achieved at, or above, the level of the qualification: 53
Qualification Title: Level 3 NVQ Diploma in Wood Occupations (Construction) Pathway 1: Level 3 NVQ Diploma in Wood Occupations (Site Carpentry) Pathway 2: Level 3 NVQ Diploma in Wood Occupations (Architectural
transportable cutting and shaping machines in the workplace
Unit Update D/503/2408: SETTING UP AND USING TRANSPORTABLE CUTTING AND SHAPING MACHINES IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published
ApprenticeshipsNI Level 2 Bench Joinery & Level 3 Bench Joinery
Level 2 Bench Joinery & Level 3 Bench Joinery in Bench Joinery combines the practical hands-on experience of the workplace with the knowledge and workshops. What will the student study? NVQ Level 2 Diploma
WOODWORKING TOOLS. Saws Sanders and Planers Laminate Trimmer
WOODWORKING TOOLS. Saws Sanders and Planers Laminate Trimmer WOODWORKING TOOLS. ROUTER AND JIGS The router is ideal for rebating, grooving and recessing work in workshops or on-site. The jig is invaluable
Traditional Building Skills Training, Qualifications & Competency in the Built Heritage Sector
Traditional Building Skills Training, Qualifications & Competency in the Built Heritage Sector Seamus Hanna Specialist Projects & Development Manager CITB-ConstructionSkills Three Areas Covered: Traditional
2017 British Woodworking Federation
2017 British Woodworking Federation Background The woodworking sector employs the highest ratio of apprentices in the construction sector. Apprenticeship reform opens up new opportunities for employing
EURTON ELECTRIC CO., INC.
DW100 DW101 DW106 DW106K 8032S 790402-00 HD Drill - VSR 8032S 790402-00 HD Drill 8032S 143803-00 HD Drill 8032S 143803-00 HD Drill DW514K 02-061 143803-00 HD Drill DW523K 02-061 790402-00 HD Drill - VSR
1. Qualification specification
Qualification title: OAL Level 2 NVQ in Woodmachining Qualification number (QN): 603/0213/6 1. Qualification specification 1.1. Qualification purpose This qualification is designed to develop and assess
Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
Construction III Curriculum Maps
Curriculum Maps Unit 1: Shop Safety Unit 2: Shop Equipment and Tool Review Unit 3: Project I Unit 4: Building Plans and Materials Unit 5: Footings and Foundations Unit 6: Floor Framing Unit 7: Wall Framing
Cabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 FOLLOW RULES FOR WORKING IN THE CABINETMAKING LAB. 101 Review and discuss school rules. 102 Review and demonstrate knowledge of cabinetmaking lab rules. 103 Complete all theory
Cabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State
National Certificate in Wood Product Manufacturing (Level 3)
NQF Ref 0815 Version 3 Page 1 of 10 National Certificate in Wood Product (Level 3) Level 3 Credits 80 This qualification is expiring. The last date to meet the requirements is 31 December 2011. Purpose
Level 1 Diploma in Plastering
Level 1 Diploma in Plastering The Level 1 Diploma in Plastering offers a good grounding in the practical skills and knowledge designed to prepare the trainee for entry into the trowel trades and the construction
POS Perkins Statewide Articulation Agreement Documentation Coversheet
POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL
Construction Building (Wales)
Construction Building (Wales) IMPORTANT NOTIFICATION FOR ALL APPRENTICESHIP STARTS FROM 14 OCTOBER 2016 Modifications to SASW came into effect on 14 October 2016. These changes relate to the Essential
Arrangements for: Professional Development Awards. at SCQF level 7
Arrangements for: Professional Development Awards at SCQF level 7 G9PM 47: Bricklaying G9R1 47: Carpentry and Joinery G9PN 47: Painting and Decorating G9P6 47: Plastering G9R2 47: Roof Slating and Tiling
ABC Level 2 Certificate in Footwear and Leather (NVQ) (500/6572/5)
Purpose Statement ABC Level 2 Certificate in Footwear and Leather (NVQ) (500/6572/5) ABC Awards is at the forefront of developments within the fashion and textiles sector and has a suite of vocational
Secondary Wood Products Manufacturing 2015
Secondary Wood Products Manufacturing 2015 Forest Industry Sectors Tertiary Primary Secondary Forest Industry Sectors Tertiary Secondary Primary Primary Sector Sawmilling Pulp and paper Composite panel
CARPENTRY AND JOINERY
EXAMINATION SCHEME CARPENTRY AND JOINERY There will be three papers, Papers 1, 2 and 3, all of which must to be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. Paper 1: Paper
This qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1504 Version 2 Page 1 of 14 National Certificate in Furniture (Level 4) with strands in Furniture Design and Markets, Craft Finisher, Machine Setter, Furniture Maker, Advanced Upholstery, and
Construction Building (England)
Construction Building (England) IMPORTANT NOTIFICATION FOR ALL APPRENTICESHIP STARTS FROM 22 AUGUST 2017 Modifications to SASE came into effect on 22 August 2017. Accordingly, SASE publication DFE-00167-2017
PRACTICAL TASK MANUAL
6706-28 Level 2 Diploma in Wood Machining for Joinery Manufacture PRACTICAL TASK MANUAL July 2014 Version 1.0 Contents Candidate details 2 Unit assessment overview 3 Practical task completion record 3
Overview and Working Conditions of the Carpentry and Joinery Trades
Youth Explore Trades Skills Overview and Working Conditions of the Carpentry and Joinery Trades Description There are two fields of woodworking trades within the construction industry in British Columbia:
Perfect Machines Center
+91-8048603597 Perfect s Center https://www.perfectmachinescentre.in/ We have emerged as an eminent manufacturer and distributor of workshop machinery like heavy duty lathe machines, universal milling
ST. PATRICK S COLLEGE SILVERSTREAM. BCATS Level
ST. PATRICK S COLLEGE SILVERSTREAM BCATS Level 2-2015 Building Construction and Allied Trades Skills Course Handbook This book with be used throughout the course as a source of information and as a record
Strands & Standards CONSTRUCTION TRADES FOUNDATION
Strands & Standards CONSTRUCTION TRADES FOUNDATION COURSE DESCRIPTION A course that generally prepares individuals in the following areas: basic safety, introduction to blueprint reading, introduction
Level 3 Diplomas in Furniture Restoration, Installation, Design & Making, Furnishings and Wood Machining (5780) August 2017 Version 2.
QUALIFICATION HANDBOOK Level 3 Diplomas in Furniture Restoration, Installation, Design & Making, Furnishings and Wood Machining (5780) August 2017 Version 2.3 Qualification at a glance Subject area City
PRACTICAL TASK MANUAL
6706-13 Level 1 Diploma in Carpentry and Joinery September 2013 Version 1.1 PRACTICAL TASK MANUAL Contents Task manual amendments 1 Candidate details 2 Unit assessment overview 3 Practical task completion
Portable circular saw Used to cut a wide range of construction materials Check the cord, leads and 3 pin plugs for any damage. A Residual Current Device (RCD) is plugged into the power source. Do not stand
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
EL DORADO UNION HIGH SCHOOL DISTRICT Educational Services. Course of Study Information Page
Course of Study Information Page Course Title: Woodworking and Carpentry #0520 Rationale: This is an introduction into the world of woodworking where the student will learn the basics of cabinetmaking,
Title: Construct and install straight flight stairs Level: 4 Credits: 10
Unit ID: 1606 Domain CARPENTRY Title: Construct and install straight flight stairs Level: 4 Credits: 10 Purpose This unit standard specifies the competencies required to construct and install straight
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit number- D2WH 04 -Unit title- CARPENTRY AND JOINERY: TIMBER STAIRS WITH TAPERED STEPS -Superclass category-
Carpentry. Full Time
Full Time Cabinet Maker Manufacturing Job Number: 3643 Shop Production Worker Installer Millwork Hours/Days: Monday-Friday Salary: $16.00/hr. Requirements: Los Angeles, CA Skills Requirements: Minimum
CABINETMAKING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with cabinetmaking or millwork as the occupational objective.
CABINETMAKING PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of cabinetmaking and millwork. GENERAL
Passaic County Technical Institute CARPENTRY II JANUARY 2004
Passaic County Technical Institute CARPENTRY II JANUARY 2004 CARPENTRY II I. DESCRIPTION Carpentry two is a full year course which is intended to introduce the student to the proper and safe use of materials,
Materials Design and Technology
Materials Design and Technology Resource list Multimedia 2011/31465[v2] Materials Design and Technology: Resource list Multimedia 1 Copyright School Curriculum and Standards Authority, 2012 This document
Gable Roof Pavilions
Wood Pavilions Gable Roof Pavilions Pitch & Taper Framing Wood PTC Beams Tube Steel Columns Prime-painted Steel Wood Columns Stain Multiple s Available 4:12 Pitch Truss Framing Wood Trusses Tube Steel
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: BUC 110 (2007-1) Identifier is the postsecondary course prefix followed by Plan-of- Instruction
FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK
BAA ADVANCED JOINERY FRAMEWORK 12
BAA ADVANCED JOINERY FRAMEWORK 12 DISTRICT NAME: Coquitlam DISTRICT NUMBER: SD#43 DEVELOPED BY: Dave Jones DATE DEVELOPED: April 20, 2006 SCHOOL NAME: Dr. Charles Best PRINCIPAL S NAME: Brian Fichter BOARD/AUTHORITY
Experienced Worker Assessment Blueprint Carpentry
Blueprint Carpentry Test Code: 0207 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Hand Tools Use and maintain fastening and prying tools Use and maintain sawing and cutting
Grades 9 to 12 Carpentry. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Manitoba Technical-Vocational Curriculum Framework of G r a d e s 9 t o 1 2 C a r p e n t r y Manitoba Technical-Vocational Curriculum Framework of 2013 Manitoba Education Manitoba Education
Level 3 Diploma in Site Carpentry ( ) July 2014 Version 2.2
Level 3 Diploma in Site Carpentry (6706-33) QUALIFICATION HANDBOOK July 2014 Version 2.2 Qualification at a glance Subject area Construction City & Guilds number 6706-33 Age group approved 16-18, 19+ Entry
PRACTICAL TASK MANUAL
6706-33 Level 3 Diploma in Site Carpentry November 2013 Version 1.3 PRACTICAL TASK MANUAL Contents Task manual amendments 2 Candidate details 3 Unit assessment overview 4 Practical task completion record
Paul: Evolving workshop needs Neville: Setting up a small workshop Paul: Setting up a medium-sized workshop
Paul: Evolving workshop needs Neville: Setting up a small workshop Paul: Setting up a medium-sized workshop Presentations will be available on the Association s website www.ptawoodworkers.com Interest
PRACTICAL TASK MANUAL
6706-23 Level 2 Diploma in Site Carpentry August 2013 Version 1.1 PRACTICAL TASK MANUAL Contents Task manual amendments 1 Candidate details 2 Unit assessment overview 3 Practical task completion record
PRACTICAL TASK MANUAL
6806-37 Diploma in Shopfitting Joinery at SCQF Level 6 PRACTICAL TASK MANUAL September 2014 Version 1.0 Contents Candidate details 1 Unit assessment overview 2 Practical task completion record 2 Instructions
UNIT Construction Crafts: Bench Joinery (Intermediate 2)
National Unit Specification: general information CODE DX0J 11 COURSE Construction Crafts (Intermediate 2) SUMMARY This Unit is a mandatory Unit within the Intermediate 2 Construction Crafts Course and
Wood Products Taxonomy
Then 1 Now 2 Wood Products Taxonomy WOOD Composites Solid Wood Panels Engineered Lumber Composites (ELC) Softwood Lumber Glued Treated Hardwood Lumber Wood/ Non-wood Wood Based LVL Boards Finger joined
Lesson Plan. Overall aims of session. Assessment strategies How will you & the learners know they have (fully/partly/not) achieved the objectives?
Lesson Plan Tutor: A Chippy Room Number: Programme: Up-skilling Date: Course code & title: Joinery Up-skilling Session Title: Joinery Up-skilling Course duration: 19.5 hours (3 days) Attendance: 9am to
National Certificate in Furniture (Manufacturing Upholstery) (Level 2)
NQF Ref 0621 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery) (Level 2) Level 2 Credits 63 This qualification is expiring. The last date to meet the requirements is 31
JOINERY: PANEL JOINTS
PANEL JOINTS Making Wood Wider: The Rubbed Joint... 890 Making Wood Wider: Cramped Joints and Thin Wood... 893 In the Workshop: Glued Joints... 895 Edge Jointing... 898 Edge Jointing (Continued)... 901
Hornsby Woodworking Men s Shed. Guide to the Shed s Woodworking Machines
Guide to the Shed s Woodworking Machines SP00 Purpose The primary purpose of this document is to assist the induction of new members of the Hornsby Woodworking Men s Shed in the identification and understanding
Construction Trades Foundation
PRECISION EXAMS Construction Trades Foundation EXAM INFORMATION Items 65 Points 82 Prerequisites NONE Grade Level 10-12 Course Length ONE YEAR DESCRIPTION This course will focus on the foundation of construction
SALE LISTING of HAND TOOLS etc
Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 22 nd September 2018 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery
Carpentry Level 1, 2014
A Correlation of Carpentry Level 1, Utah Core Curriculum for Resource Title: Carpentry Publisher: Pearson Education publishing as Prentice Hall ISBN: SE: 9780133403800 Media (text, software, internet,
Curriculum Mapping School CPHS
Curriculum Mapping School CPHS New Jersey Quality Single Accountability Continuum (NJQSAC) Wood Shop Grade Level 9,10,11,12 Unit 1, September Unit 2, October Why is safety so important to working in the
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: CAR 111 & CAR 114 (2006-1) Identifier is the postsecondary course prefix followed by Plan-of-
Environmentally Responsible Panel Manufacture
P.O. Box 726 Winder Georgia 30680 (770) 868-1423 Fax (770) 868-1325 www.atlantasunbelt.com Environmentally Responsible Panel Manufacture Sets a new benchmark in environmentally responsible panel manufacture.
WAEC Sample Questions and Schemes - Uploaded online by WOODWORK
SCHEME OF EXAMINATION WOODWORK There will be three papers, Papers 1, 2 and 3 all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. PAPER 1: Will consist of forty
Diorama. How to make a diorama or model building
Diorama How to make a diorama or model building Tools required Basic Tools: Drill, Circular saw, Jig saw, Utility Knife (Stanley) Hammer, Wood Glue and Nails These are all you need to get started. Later
Make a cupboard as a BCATS
National Certificate in Building, Construction, and Allied Trades Skills (BCATS) Make a cupboard as a BCATS project Unit Standard 25921 Level 2, Credit 6 Name: Contents Reference Page What you need to
Purepanel Plus Environmentally Responsible Board Manufacture
Purepanel Plus Environmentally Responsible Board Manufacture Purepanel Plus Sets a new benchmark in environmentally responsible board manufacture. P+ is a precision engineered structural quality board
Pergola. How To Build A. ***Safety First*** Please read the section on workplace safety at the end of this manual before proceeding with any work.
How To Build A Pergola ***Safety First*** Please read the section on workplace safety at the end of this manual before proceeding with any work. How To Build A Pergola Pergolas can be built to many different
Cabinetmaking PRECISION EXAMS
PRECISION EXAMS Cabinetmaking EXAM INFORMATION Items 72 Points 74 Prerequisites WOODWORKING Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION The third instructional course in a sequence of courses
BCHS Curriculum Map
Department Design Technology Year 10 Qualification Construction BCHS Curriculum Map 2016-2017 Autumn 1 Autumn 1 Unit 6: Exploring Carpentry Joinery Principles Techniques. Assignment 1 Introduction to unit
Carpentry. Full Time Job Title: Cabinet Installer Job Number: 3547 Hours/Days: Monday-Friday Salary: $15+DOE Location:
Full Time Job Title: Cabinet Installer Job Number: 3547 Hours/Days: Monday-Friday Salary: $15+DOE Greater Los Angeles, CA Requirements: Skills Requirements: Experienced with finish carpentry and/or experience
Regulated Qualifications unit and Assessment Specification
Regulated Qualifications unit and Assessment Specification Unit title Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques Regulator unit D/503/1453 code SQA unit code H2TC 53
PRACTICAL TASK MANUAL
6706-36 Level 3 Diploma in Bench Joinery August 2013 Version 1.1 PRACTICAL TASK MANUAL Contents Task manual amendments 1 Candidate details 2 Unit assessment overview 3 Practical task completion record
Total Test Questions: 65 Levels: Grades Units of Credit: 1.0
DESCRIPTION This course will focus on the foundation of construction trades. Students will learn and practice basic safety skills. They will need to understand and demonstrate basic math skills. Students
Brick : Air Compressors Portable
Brick 10003555: Air Compressors Portable Includes any products that may be described/observed as a compressor that takes in air at atmospheric pressure and delivers it at a higher pressure. Relatively
Agricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
Level 3 Diploma in Bench Joinery ( ) July 2014 Version 2.2
Level 3 Diploma in Bench Joinery (6706-36) QUALIFICATION HANDBOOK July 2014 Version 2.2 Qualification at a glance Subject area Construction City & Guilds number 6706-36 Age group approved 16-18, 19+ Entry
Materials, tools and processes
Materials, tools and processes Extension material for Level 1 Design and Visual Communication Study Guide ISBN 978-1-877459-02-3, Page 153 Tools Tools are used to work materials to improve their appearance,
National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3)
NQF Ref 0619 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3) Level 3 Credits 59 This qualification is expiring. The last date to meet the requirements
Producing and finishing holes using drilling machines
Unit 336 Producing and finishing holes using drilling machines UAN: Level: 3 Credit value: 14 GLH: 56 Relationship to NOS: Endorsement by a sector or regulatory body: Aim: Y/601/2264 This unit has been
Measuring What Matters in. Job Ready Assessment Blueprint. Cabinetmaking
Measuring What Matters in Job Ready Assessment Blueprint Cabinetmaking Test Code: 3014 / Version: 01 Copyright 2010 General Assessment Information Blueprint Contents General Assessment Information Written
All About Construction Issue 11 February 2019
All About Construction Issue 11 February 2019 A newsletter from City & Guilds on professional and technical education updates in construction for all nations. In this issue: New Industry Manager for construction
Level 3 Advanced Technical Diploma in Site Carpentry (450) ( )
Level 3 Advanced Technical Diploma in Site Carpentry (450) (7906-30) Version 1.0 Practice Tasks Level 3 Advanced Technical Diploma in Site Carpentry [7906-30] Introduction General information about structure
Carry out structural carcassing operations
Reference : K/504/7882 Level : Level 2 Credit Value : 16 Carry out structural carcassing operations Guided Learning Hours : 128 Grading Type : Graded Aim : The aim of this unit is to provide the learner
VOLUNTEER APPLICATION 2018
WV VOAD 2700 E. Dupont Ave., Suite 14 Belle, WV 25015 Dear Volunteer, Thank you for your interest in volunteering with West Virginia Voluntary Organizations Active in Disaster (WV VOAD). Please read carefully
Cactus Routed Bowl. MLCS Items Needed:
Cactus Routed Bowl MLCS Items Needed: Cactus Bowl and Tray Template #9188 Top Mounted Bearing Dish Cutter Router Bit #7817 1/2 Router Collet Extension and Wrenches #9465 45* Degree Chamfer Bit #7676 1-3/8
Wisconsin Technical College System. Curriculum Standards & Program Design Summary CARPENTRY APPRENTICE (ABC)
Program Information Program Curriculum Standards & Program Design Summary 50-410-9 CARPENTRY APPRENTICE (ABC) Carpenters make up the largest building trades occupation in the industry and those with all-around
Chili Pepper Routed Bowl
Chili Pepper Routed Bowl MLCS Items Needed: Chili Pepper Bowl and Tray Template #9189 Top Mounted Bearing Dish Cutter Router Bit #7817 1/2 Router Collet Extension and Wrenches #9465 3/16 Radius Round Over
Working with Wood and Wood Materials
Working with Wood and Wood Materials Excerpt from the Bosch Encyclopedia of Power Tools. Written & Published by ROBERT BOSCH GmbH and Robert Bosch Tool Corporation. The grain direction of the fibers determines
LOT QTY DESCRIPTION NOTE 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC
1 CONTENTS LOFT OFFICE INCLUDING P.C, DESKS, CHAIRS, ETC 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC 3 TURNED TIMBER BALUSTRADE, METAL BALUSTRADE & TIMBER STOCKS 4
This unit contains material that supports the following NVQ unit: This unit will cover the following learning outcomes:
Once plasterwork has been completed, you will be in a position to carry out second fixing. Second fixing is the name given to all joinery work undertaken after plasterwork has been finished, and includes
Sauna & Steam. Traditional Sauna Installation Instruction Manual
Traditional Sauna Installation Instruction Manual Oceanic Ltd, Pountney Street, Wolverhampton, WV2 4HX Phone: 01902 450 550 sales@oceanic-saunas.co.uk www.oceanic-saunas.co.uk Contents 1.Introduction................................................
GRINDERS 86 SAWS 86-90
sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful
2 WOOD AND METAL SHOP 3 SAFETY GUIDELINES 4 COMMUNITY PRACTICES 5 TOOL CHECKOUT PROCEDURES 6 MATERIALS PURCHASING 7 AUTHORIZATION PROCEDURES
0 CONTENTS 1 WELCOME 2 WOOD AND METAL SHOP 3 SAFETY GUIDELINES 4 COMMUNITY PRACTICES 5 TOOL CHECKOUT PROCEDURES 6 MATERIALS PURCHASING 7 AUTHORIZATION PROCEDURES 1 WELCOME The Logan Center Shop is a dynamic
Class Course Planner 2018 Semester 2 Term 3
Class: Class 2018 Semester 2 3 Class: Year 7 GRAHPICS Teachers:- S.Brown/J.Crotty/R.Wales/B.Graham/J.Brolese/G.Jones. Title Inventor software Introduce students to inventor software. Show how top menu
Table of Contents for Tools and Prices:
Table of Contents for Tools and Prices: Air Compressor & NAilers....pAge 3-4 CompACtors......pAge 5 CoNCrete tools & mixers... page 5 generator & Welder.... page 5 HANd tools.......page 6 Home, lawn, &
SUPPLEMENT TO THE APPLICATION FOR CARPENTER I (JOURNEYMAN)
(Carpenter I Page 1 of 11) Name SUPPLEMENT TO THE APPLICATION FOR CARPENTER I (JOURNEYMAN) TO ALL APPLICANTS: This form is used to obtain information about your knowledge, skill and ability to perform
SEMPEO SQA Unit Code FP42 04 Producing Composite Mouldings using Wet Lay-up Techniques
Producing Composite Mouldings using Wet Lay-up Techniques Overview This standard covers a broad range of basic competences that you need to produce composite mouldings using wet-lay up laminating techniques.
Value and Versatility in Engineered Wood Shelters, Buildings and Bridges
Value and Versatility in Engineered Wood Shelters, Buildings and Bridges 1455 Lincoln Avenue Holland, MI 49423 www.ewsstructures.com (616) 796-1260 Value and Versatility in Wood Shelters, Enclosed Structures