Recommended Qualification Structure for Wood Occupations (Construction) Level 2
|
|
- Daniella King
- 5 years ago
- Views:
Transcription
1 Recommended Qualification Structure for Wood Occupations (Construction) Level 2 This structure has been recommended by employers and stakeholders from the above occupational area for organisations to form the basis of academic capability and competence outcomes. Qualifications with a competence outcome at the above level must have units derived from the following National Occupational Standards (NOS) and consist of the mandatory/optional groups as stated for the individual option route. MANDATORY (all option routes) VR641 v2 Conform to general workplace health, safety and welfare VR642 v1 Conform to productive work practices VR643 v1 Move, handle or store resources PLUS ONE OF THE FOLLOWING OPTIONAL ROUTES Site Carpentry Option Route (Total 6) Optional (three from the following) VR09 v2 Install first fixing components VR10 v2 Install second fixing components VR11 v2 Erect structural carcassing components VR12 v2 Maintain non-structural carpentry work VR358 v3 Install fire resisting timber door assemblies and door-sets Option Route (Total 5) Option Route (Total 5) Cont..
2 Site Work Option Route (Total 5) VR20 v2 Install shopfitting frames and finishings VR21 v2 VR22 v2 VR358 v3 Install shopfitting fitments Install shopfronts and finishings Install fire resisting timber door assemblies and door-sets Bench Work Option Route (Total 5) VR15 v4 VR16 v4 Mark out from setting out details for routine products Manufacture routine products Structural Post and Beam Carpentry Option Route (Total 6) VR31 v2 VR60 v2 Fabricate structural timber framework Assemble and erect heavy timber framework (post and beam) Light Structural Framing Option Route (Total 7) VR05 v2 Install frames and linings VR08 v2 Install internal mouldings VR12 v2 Maintain non-structural carpentry work VR211 v2 Confirm the occupational method of work Frame Erection Option Route (Total 5) VR289 v4 Erect timber walls and floors VR290 v5 Erect timber roof structures Additional for Frame Erection Option (not compulsory) VR402 v2 Slinging and signalling the movement of suspended loads Decks and Cladding Option Route (Total 5) VR95 v2 Install sheeting and cladding systems on roofs and walls VR629 v1 Install low level timber decks VR630 v1 Install elevated timber decks Cont..
3 Heritage Site Carpentry Option Route (Total 8) VR553 v1 Conserve or restore timber-based products Plus optional (three from the following) VR09 v2 VR10 v2 VR11 v2 VR12 v2 Install first fixing components Install second fixing components Erect structural carcassing components Maintain non-structural carpentry work Heritage Option Route (Total 6) VR553 v1 Conserve or restore timber-based products Heritage Structural Post and Beam Carpentry Option Route (Total 7) VR31 v2 Fabricate structural timber framework VR60 v2 Assemble and erect heavy timber framework (post and beam) VR554 v1 Conserve or restore heavy timber framework
4 Unit endorsements for Wood Occupations Level 2 Where industry requests; qualifications can be endorsed to show an option route and the type of resources and/or activities that relate to the unit. Listed below are the endorsements that can apply for units derived from the following NOS. NOS VR14 VR15 VR16 VR20 VR21 VR22 VR95 VR290 VR402 Endorsement (applicable to only) (applicable to only) (applicable to only) Own area of work plus one of the following: Built up Standing seam Secret fix Composite panel Fibre-cement cladding Pre-assembled roofs mechanically handled, plus one of the following: In situ roofs manually handled In situ roofs mechanically handled Slinger Signaller Occupation specific only (own area of work i.e frame erection) Cont.
5 NOS VR628 Endorsement Three of the following cutting machines: Saw circular, chop, mitre, bench, jig, reciprocating, alligator or scroll Drill Planer Biscuit jointer Disc cutter PLUS Two of the following shaping machines: Thicknesser Sander Router Grinder Laminate trimmer Note: Where industry requests an Awarding Organisation to further endorse a unit, the Awarding Organisation must first seek approval from the Standards Setting Body to ensure the endorsement is appropriate to the unit.
(Construction) v5. Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
Qualification : NVQ Diploma in Wood Occupations (Construction) v5 Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3:
More information(Construction) Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
Qualification : NVQ Diploma in Wood Occupations (Construction) Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3: NVQ
More information(Construction) Confirming work activities and resources for an occupational work area in the workplace
Qualification : NVQ Diploma in Wood Occupations (Construction) Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway : NVQ
More information(Construction) Minimum credit to be achieved at, or above, the level of the qualification: 53
Qualification Title: Level 3 NVQ Diploma in Wood Occupations (Construction) Pathway 1: Level 3 NVQ Diploma in Wood Occupations (Site Carpentry) Pathway 2: Level 3 NVQ Diploma in Wood Occupations (Architectural
More informationtransportable cutting and shaping machines in the workplace
Unit Update D/503/2408: SETTING UP AND USING TRANSPORTABLE CUTTING AND SHAPING MACHINES IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published
More informationWOODWORKING TOOLS. Saws Sanders and Planers Laminate Trimmer
WOODWORKING TOOLS. Saws Sanders and Planers Laminate Trimmer WOODWORKING TOOLS. ROUTER AND JIGS The router is ideal for rebating, grooving and recessing work in workshops or on-site. The jig is invaluable
More informationApprenticeshipsNI Level 2 Bench Joinery & Level 3 Bench Joinery
Level 2 Bench Joinery & Level 3 Bench Joinery in Bench Joinery combines the practical hands-on experience of the workplace with the knowledge and workshops. What will the student study? NVQ Level 2 Diploma
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 FOLLOW RULES FOR WORKING IN THE CABINETMAKING LAB. 101 Review and discuss school rules. 102 Review and demonstrate knowledge of cabinetmaking lab rules. 103 Complete all theory
More informationArrangements for: Professional Development Awards. at SCQF level 7
Arrangements for: Professional Development Awards at SCQF level 7 G9PM 47: Bricklaying G9R1 47: Carpentry and Joinery G9PN 47: Painting and Decorating G9P6 47: Plastering G9R2 47: Roof Slating and Tiling
More information2017 British Woodworking Federation
2017 British Woodworking Federation Background The woodworking sector employs the highest ratio of apprentices in the construction sector. Apprenticeship reform opens up new opportunities for employing
More informationEURTON ELECTRIC CO., INC.
DW100 DW101 DW106 DW106K 8032S 790402-00 HD Drill - VSR 8032S 790402-00 HD Drill 8032S 143803-00 HD Drill 8032S 143803-00 HD Drill DW514K 02-061 143803-00 HD Drill DW523K 02-061 790402-00 HD Drill - VSR
More informationTitle: Construct and install straight flight stairs Level: 4 Credits: 10
Unit ID: 1606 Domain CARPENTRY Title: Construct and install straight flight stairs Level: 4 Credits: 10 Purpose This unit standard specifies the competencies required to construct and install straight
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State
More informationStrands & Standards CONSTRUCTION TRADES FOUNDATION
Strands & Standards CONSTRUCTION TRADES FOUNDATION COURSE DESCRIPTION A course that generally prepares individuals in the following areas: basic safety, introduction to blueprint reading, introduction
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationConstruction III Curriculum Maps
Curriculum Maps Unit 1: Shop Safety Unit 2: Shop Equipment and Tool Review Unit 3: Project I Unit 4: Building Plans and Materials Unit 5: Footings and Foundations Unit 6: Floor Framing Unit 7: Wall Framing
More informationPerkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
More informationNational Certificate in Wood Product Manufacturing (Level 3)
NQF Ref 0815 Version 3 Page 1 of 10 National Certificate in Wood Product (Level 3) Level 3 Credits 80 This qualification is expiring. The last date to meet the requirements is 31 December 2011. Purpose
More informationTraditional Building Skills Training, Qualifications & Competency in the Built Heritage Sector
Traditional Building Skills Training, Qualifications & Competency in the Built Heritage Sector Seamus Hanna Specialist Projects & Development Manager CITB-ConstructionSkills Three Areas Covered: Traditional
More informationMaterials Design and Technology
Materials Design and Technology Resource list Multimedia 2011/31465[v2] Materials Design and Technology: Resource list Multimedia 1 Copyright School Curriculum and Standards Authority, 2012 This document
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit number- D2WH 04 -Unit title- CARPENTRY AND JOINERY: TIMBER STAIRS WITH TAPERED STEPS -Superclass category-
More informationPortable circular saw Used to cut a wide range of construction materials Check the cord, leads and 3 pin plugs for any damage. A Residual Current Device (RCD) is plugged into the power source. Do not stand
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: BUC 110 (2007-1) Identifier is the postsecondary course prefix followed by Plan-of- Instruction
More informationHornsby Woodworking Men s Shed. Guide to the Shed s Woodworking Machines
Guide to the Shed s Woodworking Machines SP00 Purpose The primary purpose of this document is to assist the induction of new members of the Hornsby Woodworking Men s Shed in the identification and understanding
More information1. Qualification specification
Qualification title: OAL Level 2 NVQ in Woodmachining Qualification number (QN): 603/0213/6 1. Qualification specification 1.1. Qualification purpose This qualification is designed to develop and assess
More informationST. PATRICK S COLLEGE SILVERSTREAM. BCATS Level
ST. PATRICK S COLLEGE SILVERSTREAM BCATS Level 2-2015 Building Construction and Allied Trades Skills Course Handbook This book with be used throughout the course as a source of information and as a record
More informationPOS Perkins Statewide Articulation Agreement Documentation Coversheet
POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL
More informationCARPENTRY AND JOINERY
EXAMINATION SCHEME CARPENTRY AND JOINERY There will be three papers, Papers 1, 2 and 3, all of which must to be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. Paper 1: Paper
More informationPRACTICAL TASK MANUAL
6806-37 Diploma in Shopfitting Joinery at SCQF Level 6 PRACTICAL TASK MANUAL September 2014 Version 1.0 Contents Candidate details 1 Unit assessment overview 2 Practical task completion record 2 Instructions
More informationSecondary Wood Products Manufacturing 2015
Secondary Wood Products Manufacturing 2015 Forest Industry Sectors Tertiary Primary Secondary Forest Industry Sectors Tertiary Secondary Primary Primary Sector Sawmilling Pulp and paper Composite panel
More informationNational Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3)
NQF Ref 0619 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3) Level 3 Credits 59 This qualification is expiring. The last date to meet the requirements
More informationUNIT Construction Crafts: Bench Joinery (Intermediate 2)
National Unit Specification: general information CODE DX0J 11 COURSE Construction Crafts (Intermediate 2) SUMMARY This Unit is a mandatory Unit within the Intermediate 2 Construction Crafts Course and
More informationPaul: Evolving workshop needs Neville: Setting up a small workshop Paul: Setting up a medium-sized workshop
Paul: Evolving workshop needs Neville: Setting up a small workshop Paul: Setting up a medium-sized workshop Presentations will be available on the Association s website www.ptawoodworkers.com Interest
More informationPerfect Machines Center
+91-8048603597 Perfect s Center https://www.perfectmachinescentre.in/ We have emerged as an eminent manufacturer and distributor of workshop machinery like heavy duty lathe machines, universal milling
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: CAR 111 & CAR 114 (2006-1) Identifier is the postsecondary course prefix followed by Plan-of-
More informationSEMPEO SQA Unit Code FP42 04 Producing Composite Mouldings using Wet Lay-up Techniques
Producing Composite Mouldings using Wet Lay-up Techniques Overview This standard covers a broad range of basic competences that you need to produce composite mouldings using wet-lay up laminating techniques.
More informationLevel 1 Diploma in Plastering
Level 1 Diploma in Plastering The Level 1 Diploma in Plastering offers a good grounding in the practical skills and knowledge designed to prepare the trainee for entry into the trowel trades and the construction
More informationGERED GEREEDSCHAP HELPS: TOOL RENTAL LOCATIONS
GERED GEREEDSCHAP IS MAKING IT WORK Gered Gereedschap is a Dutch NGO which has been making a consistent effort for craftsmen in developing countries for the last 35 years. Projects supported by Gered Gereedschap
More informationConstruction Trades Foundation
PRECISION EXAMS Construction Trades Foundation EXAM INFORMATION Items 65 Points 82 Prerequisites NONE Grade Level 10-12 Course Length ONE YEAR DESCRIPTION This course will focus on the foundation of construction
More informationFACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK
More informationPRACTICAL TASK MANUAL
6706-33 Level 3 Diploma in Site Carpentry November 2013 Version 1.3 PRACTICAL TASK MANUAL Contents Task manual amendments 2 Candidate details 3 Unit assessment overview 4 Practical task completion record
More informationBAA ADVANCED JOINERY FRAMEWORK 12
BAA ADVANCED JOINERY FRAMEWORK 12 DISTRICT NAME: Coquitlam DISTRICT NUMBER: SD#43 DEVELOPED BY: Dave Jones DATE DEVELOPED: April 20, 2006 SCHOOL NAME: Dr. Charles Best PRINCIPAL S NAME: Brian Fichter BOARD/AUTHORITY
More informationCarpentry Level 1, 2014
A Correlation of Carpentry Level 1, Utah Core Curriculum for Resource Title: Carpentry Publisher: Pearson Education publishing as Prentice Hall ISBN: SE: 9780133403800 Media (text, software, internet,
More informationGrades 9 to 12 Carpentry. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Manitoba Technical-Vocational Curriculum Framework of G r a d e s 9 t o 1 2 C a r p e n t r y Manitoba Technical-Vocational Curriculum Framework of 2013 Manitoba Education Manitoba Education
More informationExperienced Worker Assessment Blueprint Carpentry
Blueprint Carpentry Test Code: 0207 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Hand Tools Use and maintain fastening and prying tools Use and maintain sawing and cutting
More informationCABINETMAKING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with cabinetmaking or millwork as the occupational objective.
CABINETMAKING PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of cabinetmaking and millwork. GENERAL
More informationPergola. How To Build A. ***Safety First*** Please read the section on workplace safety at the end of this manual before proceeding with any work.
How To Build A Pergola ***Safety First*** Please read the section on workplace safety at the end of this manual before proceeding with any work. How To Build A Pergola Pergolas can be built to many different
More informationNational Certificate in Furniture (Manufacturing Upholstery) (Level 2)
NQF Ref 0621 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery) (Level 2) Level 2 Credits 63 This qualification is expiring. The last date to meet the requirements is 31
More informationVCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2012 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET FURNISHING (CABINET MAKING) Written examination Section Monday 12 November
More informationOverview and Working Conditions of the Carpentry and Joinery Trades
Youth Explore Trades Skills Overview and Working Conditions of the Carpentry and Joinery Trades Description There are two fields of woodworking trades within the construction industry in British Columbia:
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1504 Version 2 Page 1 of 14 National Certificate in Furniture (Level 4) with strands in Furniture Design and Markets, Craft Finisher, Machine Setter, Furniture Maker, Advanced Upholstery, and
More informationPRACTICAL TASK MANUAL
6706-28 Level 2 Diploma in Wood Machining for Joinery Manufacture PRACTICAL TASK MANUAL July 2014 Version 1.0 Contents Candidate details 2 Unit assessment overview 3 Practical task completion record 3
More informationLevel 3 Diplomas in Furniture Restoration, Installation, Design & Making, Furnishings and Wood Machining (5780) August 2017 Version 2.
QUALIFICATION HANDBOOK Level 3 Diplomas in Furniture Restoration, Installation, Design & Making, Furnishings and Wood Machining (5780) August 2017 Version 2.3 Qualification at a glance Subject area City
More informationMeasuring What Matters in. Job Ready Assessment Blueprint. Cabinetmaking
Measuring What Matters in Job Ready Assessment Blueprint Cabinetmaking Test Code: 3014 / Version: 01 Copyright 2010 General Assessment Information Blueprint Contents General Assessment Information Written
More informationPassaic County Technical Institute CARPENTRY II JANUARY 2004
Passaic County Technical Institute CARPENTRY II JANUARY 2004 CARPENTRY II I. DESCRIPTION Carpentry two is a full year course which is intended to introduce the student to the proper and safe use of materials,
More informationOCCUPATIONAL STANDARD Conventional machine tool operator, level 3
OCCUPATIONAL STANDARD Conventional machine tool operator, level 3 The occupational standard is a document that describes the job and competence requirements, i.e. a set of skills, knowledge and attitudes
More informationSALE LISTING of HAND TOOLS etc
Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 22 nd September 2018 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery
More informationLOT QTY DESCRIPTION NOTE 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC
1 CONTENTS LOFT OFFICE INCLUDING P.C, DESKS, CHAIRS, ETC 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC 3 TURNED TIMBER BALUSTRADE, METAL BALUSTRADE & TIMBER STOCKS 4
More informationTotal Test Questions: 65 Levels: Grades Units of Credit: 1.0
DESCRIPTION This course will focus on the foundation of construction trades. Students will learn and practice basic safety skills. They will need to understand and demonstrate basic math skills. Students
More informationRelease 2. MSF31113 Certificate III in Cabinet Making
Release 2 MSF31113 Certificate III in Cabinet Making MSF31113 Certificate III in Cabinet Making Modification History Release 2 - One unit title corrected for MSFFM3010. No change in outcomes. Release 1
More informationEL DORADO UNION HIGH SCHOOL DISTRICT Educational Services. Course of Study Information Page
Course of Study Information Page Course Title: Woodworking and Carpentry #0520 Rationale: This is an introduction into the world of woodworking where the student will learn the basics of cabinetmaking,
More informationCarpentry. EXAM INFORMATION Items. Points. Prerequisites. Course Length. Career Cluster EXAM BLUEPRINT. 1- Materials, Fasteners & Adhesives 10%
EXAM INFORMATION Items 73 Points 73 Prerequisites NONE Course Length DESCRIPTION This is the first in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden
More informationLevel 3 Diploma in Site Carpentry ( ) July 2014 Version 2.2
Level 3 Diploma in Site Carpentry (6706-33) QUALIFICATION HANDBOOK July 2014 Version 2.2 Qualification at a glance Subject area Construction City & Guilds number 6706-33 Age group approved 16-18, 19+ Entry
More informationABC Level 2 Certificate in Footwear and Leather (NVQ) (500/6572/5)
Purpose Statement ABC Level 2 Certificate in Footwear and Leather (NVQ) (500/6572/5) ABC Awards is at the forefront of developments within the fashion and textiles sector and has a suite of vocational
More informationLesson Plan. Overall aims of session. Assessment strategies How will you & the learners know they have (fully/partly/not) achieved the objectives?
Lesson Plan Tutor: A Chippy Room Number: Programme: Up-skilling Date: Course code & title: Joinery Up-skilling Session Title: Joinery Up-skilling Course duration: 19.5 hours (3 days) Attendance: 9am to
More informationWorking with Wood and Wood Materials
Working with Wood and Wood Materials Excerpt from the Bosch Encyclopedia of Power Tools. Written & Published by ROBERT BOSCH GmbH and Robert Bosch Tool Corporation. The grain direction of the fibers determines
More informationTable of Contents for Tools and Prices:
Table of Contents for Tools and Prices: Air Compressor & NAilers....pAge 3-4 CompACtors......pAge 5 CoNCrete tools & mixers... page 5 generator & Welder.... page 5 HANd tools.......page 6 Home, lawn, &
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationPRACTICAL TASK MANUAL
6706-23 Level 2 Diploma in Site Carpentry August 2013 Version 1.1 PRACTICAL TASK MANUAL Contents Task manual amendments 1 Candidate details 2 Unit assessment overview 3 Practical task completion record
More informationMaterials, tools and processes
Materials, tools and processes Extension material for Level 1 Design and Visual Communication Study Guide ISBN 978-1-877459-02-3, Page 153 Tools Tools are used to work materials to improve their appearance,
More informationGRINDERS 86 SAWS 86-90
sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful
More informationConstruction Building (Wales)
Construction Building (Wales) IMPORTANT NOTIFICATION FOR ALL APPRENTICESHIP STARTS FROM 14 OCTOBER 2016 Modifications to SASW came into effect on 14 October 2016. These changes relate to the Essential
More informationCactus Routed Bowl. MLCS Items Needed:
Cactus Routed Bowl MLCS Items Needed: Cactus Bowl and Tray Template #9188 Top Mounted Bearing Dish Cutter Router Bit #7817 1/2 Router Collet Extension and Wrenches #9465 45* Degree Chamfer Bit #7676 1-3/8
More informationCarpentry. Full Time
Full Time Cabinet Maker Manufacturing Job Number: 3643 Shop Production Worker Installer Millwork Hours/Days: Monday-Friday Salary: $16.00/hr. Requirements: Los Angeles, CA Skills Requirements: Minimum
More information2016 HSC Industrial Technology Timber Products and Furniture Technologies Marking Guidelines
2016 HSC Industrial Technology Timber Products and Furniture Technologies Marking Guidelines Section I Multiple-choice Answer Key Question Answer 1 A 2 D 3 A 4 B 5 C 6 C 7 D 8 D 9 B 10 B 1 Section II Question
More informationChili Pepper Routed Bowl
Chili Pepper Routed Bowl MLCS Items Needed: Chili Pepper Bowl and Tray Template #9189 Top Mounted Bearing Dish Cutter Router Bit #7817 1/2 Router Collet Extension and Wrenches #9465 3/16 Radius Round Over
More informationModel Curriculum. Carpenter Wooden Furniture FURNITURE & FITTINGS WOODEN FURNITURE CARPENTRY FFS/ Q0102, VERSION 1.0 4
Model Curriculum Carpenter Wooden Furniture SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: FURNITURE & FITTINGS WOODEN FURNITURE CARPENTRY FFS/ Q0102, VERSION 1.0 4 TABLE OF CONTENTS 1. Curriculum
More informationBrick : Air Compressors Portable
Brick 10003555: Air Compressors Portable Includes any products that may be described/observed as a compressor that takes in air at atmospheric pressure and delivers it at a higher pressure. Relatively
More informationAGR-ANG AGR-ANG12
SAWING & CUTTING DIAMOND BLADES AGR-ANG5 10.50 5.25 14.00 17.50 74 CUTTING WHEELS Health & Safety Contact your local depot for information on training that is available, for the selection and safe mounting
More informationCurriculum Mapping School CPHS
Curriculum Mapping School CPHS New Jersey Quality Single Accountability Continuum (NJQSAC) Wood Shop Grade Level 9,10,11,12 Unit 1, September Unit 2, October Why is safety so important to working in the
More informationYale Practices for Tool Safeguarding and Controls 1
Arbor Press Manual Caught between crushing, limited by manual operation Band Saw / Small Bench Cutting blade lacerations Rotating blade pulleys pinch points, entanglement for wood Band Saw / Large Cutting
More informationNATIONAL CERTIFICATES (VOCATIONAL) SUBJECT GUIDELINES WORKSHOP PRACTICE NQF LEVEL 2
NATIONAL CERTIFICATES (VOCATIONAL) SUBJECT GUIDELINES WORKSHOP PRACTICE NQF LEVEL 2 IMPLEMENTATION: JANUARY 2013 INTRODUCTION A. What is Workshop Practice about? Electrical Workshop Practice introduces
More informationBCHS Curriculum Map
Department Design Technology Year 10 Qualification Construction BCHS Curriculum Map 2016-2017 Autumn 1 Autumn 1 Unit 6: Exploring Carpentry Joinery Principles Techniques. Assignment 1 Introduction to unit
More informationWisconsin Technical College System. Curriculum Standards & Program Design Summary CARPENTRY APPRENTICE (ABC)
Program Information Program Curriculum Standards & Program Design Summary 50-410-9 CARPENTRY APPRENTICE (ABC) Carpenters make up the largest building trades occupation in the industry and those with all-around
More informationWAEC Sample Questions and Schemes - Uploaded online by WOODWORK
SCHEME OF EXAMINATION WOODWORK There will be three papers, Papers 1, 2 and 3 all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. PAPER 1: Will consist of forty
More informationPRACTICAL TASK MANUAL
6706-13 Level 1 Diploma in Carpentry and Joinery September 2013 Version 1.1 PRACTICAL TASK MANUAL Contents Task manual amendments 1 Candidate details 2 Unit assessment overview 3 Practical task completion
More informationFOLDING MITRE SAW STAND MODEL NO: CFMSS1
CFMSS1 Folding Mitre Saw Stand (080602-1).fm Page 1 Monday, November 7, 2011 3:48 PM FOLDING MITRE SAW STAND MODEL NO: CFMSS1 PART NO: 6500968 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 CFMSS1 Folding
More informationBench Skills 2 Wood Carcase Construction (Intermediate 2)
National Unit Specification: general information UNIT NUMBER D183 11 Bench Skills 2 Wood Carcase Construction (Intermediate 2) COURSE Woodworking Skills (Intermediate 2) SUMMARY Applying practical skills
More informationOnGuard ACEProPLUS Product Guide
OnGuard ACEProPLUS Product Guide Training Units listed by Curriculum Pack Our OnGuard ACEProPLUS program is designed to specifically meet the needs of the Australian education sector. Additional curriculum
More informationReplicate/restore wooden components of furniture
Replicate/restore wooden components of furniture Overview This standard addresses the competence required to make wooden components for hand-crafted furniture. This involves: 1 cutting, shaping and moulding
More information23 WOODWORKING EQUIPMENT
23 WOODWORKING EQUIPMENT Chisel Mortiser Chisel mortiser... 1199 Cutting Machine Heavy duty band saw... 1197 Scroll saw... 1197 Dust Collector Dust collector... 1201 Overarm Router Overarm router... 1202
More informationG r a d e 1 1 A F o u n d a t i o n s a n d F l o o r F r a m i n g
G r a d e 1 1 A F o u n d a t i o n s a n d F l o o r F r a m i n g G r a d e 1 1 A : F o u n d a t i o n s a n d F l o o r F r a m i n g Course Description Carpentry 11A: Foundations and Floor Framing
More informationInverurie & District Men s Shed Welcome Pack
Inverurie & District Men s Shed Welcome Pack Every new member should be given a copy of this Welcome Pack Any questions arising should be addressed to a Supervisor. Safety Briefing for New Members: (Required
More informationIndustrial Technology
2017 HIGHER SCHOOL CERTIFICATE EXAMINATION Industrial Technology Timber Products and Furniture Technologies General Instructions Reading time 5 minutes Working time 1 1 2 hours Write using black pen Draw
More informationBENCH MORTICER. Woodworking Equipment Bench Morticer with Sliding Table. trade level
BENCH MORTICER 01944 Bench Morticer with Sliding Table A compact bench mounted morticer giving high levels of accuracy, ease of use with industrial features at an affordable price. An important feature
More informationSUPPLEMENT TO THE APPLICATION FOR CARPENTER I (JOURNEYMAN)
(Carpenter I Page 1 of 11) Name SUPPLEMENT TO THE APPLICATION FOR CARPENTER I (JOURNEYMAN) TO ALL APPLICANTS: This form is used to obtain information about your knowledge, skill and ability to perform
More informationMeasuring Technology in Ugandan Manufacturing
Measuring Technology in Ugandan Manufacturing Vittorio Bassi (USC), Raffaela Muoio (BRAC) Tommaso Porzio (UCSD), Ritwika Sen (IGC) and Esau Tugume (BRAC) Kampala, 14 December 2018 Motivation Firm data
More informationBC ART 108 Hand & Power Tools Syllabus Fall 2011 Gretchen Lillie Course Purpose:
BC ART 108 Hand & Power Tools Syllabus Fall 2011 Gretchen Lillie glillie@bellevuecollege.edu Course Purpose: Art 108 is designed to introduce interior design and art students to our wood shop facility
More informationSauna & Steam. Traditional Sauna Installation Instruction Manual
Traditional Sauna Installation Instruction Manual Oceanic Ltd, Pountney Street, Wolverhampton, WV2 4HX Phone: 01902 450 550 sales@oceanic-saunas.co.uk www.oceanic-saunas.co.uk Contents 1.Introduction................................................
More informationFurniture Manufacturer - Level 2
Furniture Manufacturer - Level 2 Occupational Profile The Furniture, Furnishings and Interiors industry is of significant importance to the UK economy, particularly in the supply of end products for residential
More information