4 wires. AUDIO & VIDEO TERMINALS for TL door phone systems User manual. Audio. 7" Videoadvanced. 7" Video

Transcription

1 4 wires Audi AUDIO & VIDEO TERMINALS fr TL dr phne systems User manual 3.5" Vide 7" Vide 7" Videadvanced

2 0 Cntents 1 Safety instructins 2 Descriptin f the audi-vide terminals 3 Functins f the audi-vide terminals 4 Recmmended cables. Installatin. 5 Use f the audi-vide terminals 6 Settings f the audi-vide terminals 7 Prgramming the audi-vide terminals 8 Use f the utdr panels 9 Maintenance f the dr phne cmpnents 10 Warranty 1 Safety instructins 1 Any interventin n the installatin must be perfrmed by AUTHORIZED PERSONNEL! DO NOT pwer the prduct at Va.c.! DO NOT hit the glass screen with hard bjects! If the glass screen is brken, DO NOT tuch the prduct. Prtect the prducts against lime and dust during renvatin activities. 2 Descriptin f the audi-vide terminals smart+ audi terminal ATM.0S402 ABS case + chemically tughened glass smart+ vide terminal VTM.3S402 ABS case + chemically tughened glass 170x96x22 mm 0,3 kg 0 C + 45 C IP31 = Vd.c. smart+ vide terminal VTM.7S402 ABS case + chemically tughened glass 3.5" LCD TFT 320 (RGB) x x96x22 mm 0,4 kg 0 C + 45 C IP31 = Vd.c. advanced vide terminal VTA.7S902 ABS case + chemically tughened glass 7 LCD, TFT, 800 x 3 (RGB) x 480 / / / - 60 / 60 / 40 / x227x20 mm 0,8 kg 0 C + 45 C IP31 = Vd.c. 7 LCD, TFT, 800 x 3 (RGB) x 480 / / / - 60 / 60 / 40 / x227x20 mm 0,8 kg 0 C + 45 C IP31 = Vd.c.

3 3 Functins f the audi-vide terminals Main functins Call, answer and hands-free talk Vide image display (clr during day, black & white during night) during the call, talk, mnitring and access Audi-vide mnitring with bidirectinal talk Access cmmand during call, talk and mnitring Additinal cmmand AUX key fr an auxiliary autmatin Additinally, nly fr the advanced vide terminals Picture taking during call, talk and mnitring Picture memry f up t 100 images. Visualize/ delete pictures Date and time display Settings Call and talk vlume adjustment: 7 levels and silent (mute) Ringtne selectin: 5 ptins Call duratin selectin: 1 x 5 sec., 2 x 5 sec., 3 x 5 sec. r 1 min. cntinuusly Vide image adjustment: brightness, chrminance Date and time setting Extensins 2 Auxiliary cmmand: aut gate, garage dr, utdr lighting etc. Successive vide mnitring, when additinal vide cameras are cnnected 1 additinal vide terminal and/r 3 additinal audi terminals, cnnected t the main terminal Entrance drbell, cnnected directly t the terminal Acustic (Gng type) r visual call signaling device, cnnected directly t the terminal 4 Recmmended cables. Installatin. 2 4 wires x 0.5 mm (type H03VV-F4G 0.5) fr maximum 75 lm 6mm 25-30mm 6mm 25-30mm 4.1 Installatin f the smart+ Audi-Vide Terminal STEP 1 GONG2 GONG1 Fasten the back case n the wall H=135cm Fasten the cnnectrs n the back case Make the cnnectins in the cnnectr fastened n the back case. 135 cm STEP 2

4 GONG2 GONG1 STEP 3 Mve the cnnectr with the fastened wires frm the back case t the frnt case. STEP 4 1. Place the frnt case with the fastened cnnectrs ver the back case. 2. Pull the terminal dwn until it interlcks OUT-x SCU/VCB/ACB DOORBELL Cnnectin diagram fr the AUDIO terminal AUDIO TERMINAL ATM.0S402 Additinal terminal GONG Cnnectin diagram fr the 3.5 VIDEO terminal OUT-x SCU/VCB DOORBELL VIDEO TERMINAL VTM.3S402 Additinal terminal GONG

5 STEP 2 GOG2 GOG2 4.2 Installatin f the VTM.7S402/ VTA.7S902 smart+/ advanced Vide Terminal Fasten the back case n the wall H=135cm Make the cnnectins in the cnnectr Fasten the cnnectrs n the back case fastened n the back case. STEP 1 STEP 3 Mve the cnnectr with the fastened wires frm the back case t the frnt case. STEP 4 1. Place the frnt case with the fastened cnnectrs ver the back case. 2. Pull the terminal dwn until it interlcks cm 1 2 Cnnectin diagram fr the 7 VIDEO terminal SCU/VCB VIDEO TERMINAL VTM.7S402/VTA.7S902 Additinal terminal DOORBELL GONG

6 5 Use f the audi-vide terminals 5.1 Use f the smart+ terminals smart+ audi smart+ 3.5 vide smart+ 7 vide Call answer, audi-vide mnitring (setting mde: ringtne selectin) Access cmmand (setting mde: call duratin) Vlume adjustment during talk, Mute (setting mde: call sund vlume) Auxiliary cmmand (aut gate, garage dr, utdr lighting etc.) 5 Call answer, audi-vide mnitring (setting mde: ringtne selectin) Access cmmand (setting mde: call duratin) Standard settings f the prducer: Ringtne Call duratin Call sund vlume Vlume adjustment during talk, Mute (setting mde: call sund vlume) Ding-dng (first in the list) 2 calls Level 5 ut f 7 Auxiliary cmmand (aut gate, garage dr, utdr lighting etc.) 1. STAND-BY: The keybard is nt backlighted. 2. APEL DE LA PANOUL EXTERIOR: The terminal rings fr maximum 1 min., with the selected ringtne. All the keys light up, and the key blinks. The display shws the image with the visitr. - During the call, the cnversatins that take place indrs cannt be heard utdrs. - Yu can hear and see what ges n at the entrance! Vlume adjustment during CALL: Successively tuch the key. The maximum level (7) is BEEP signaled with tw beeps (2 x [ ]). After the maximum level is reached, the adjustment recmmences at level 1. This adjustment will nt be stred. All the calls will start with the set level fr the call sund vlume (see the settings sectin). 3. CALL FROM THE DOORBELL OF THE RESIDCE. The terminal rings with a specified ringtne, set by the prducer. The vide display remains turned ff. 4. CALL ANSWER + TALK. T answer and initiate the talk, press the key, which will remain permanently backlighted. The talk takes place hands-free, during maximum 2 min. - The talk may be ended withut granting access, by tuching the key.

7 The image clses and the keys remain backlighted fr 10 mre sec. Vlume adjustment during TALK: Successively press the speaker key -. The maximum level (7) is signaled with tw BEEP beeps (2 x [ ]). After the maximum level is reached, the adjustment recmmences at level ACCESS COMMAND. DOOR/ GATE OPING. Frm the terminal, yu may cntrl the pening f the dr/gate, in the fllwing situatins: a. During TALK. If yu decide t grant access t the visitrs, tuch the key. The terminal remains n fr 10 mre sec. Yu can hear and see what ges n at the entrance! b. During audi-vide MONITORING. If yu decide t pen the dr/gate, tuch the key. The terminal remains n fr 10 mre sec. Yu can hear and see what ges n at the entrance! c. In STAND-BY mde. If yu decide t pen the dr/gate, lng tuch (2-3 sec.) the key. The terminal remains n fr 10 mre sec. Yu can hear and see what ges n at the entrance! 6. ADDITIONAL AUX COMMAND. The Tuch Line dr phnes allw the cnnectin f an additinal autmatin t the AUX terminals f the central unit: aut gate, garage dr, utdr lighting system etc. If such an autmatin is cnnected, yu may cntrl it frm the terminal thrugh the key. The AUX cmmand can be perfrmed in the fllwing situatins: a. During TALK. If yu decide t give the AUX cmmand, tuch the key. The terminal remains n fr 10 mre sec. Yu can hear and see what ges n at 6 the entrance! b. During audi-vide MONITORING. If yu decide t give the AUX cmmand, press the key. The terminal remains n fr 10 mre sec. Yu can hear and see what ges n at the entrance! c. In STAND-BY mde. If yu decide t give the AUX cmmand, lng tuch (2-3 sec.) the key. The terminal remains n fr 10 mre sec. Yu can hear and see what ges n at the entrance! 7. AUDIO-VIDEO MONITORING. Frm the STAND-BY mde, tuch the key. Mnitring, vide image + bidirectinal talk last maximum 15 sec. - During mnitring, yu can see and hear what ges n at the entrance, yu can talk tw-ways and yu may cntrl ACCESS ( ) and AUX ( ). - In a building with multiple apartments, simultaneus mnitring cannt be perfrmed. 8. AUDIO SILT MODE (MUTE). If yu d nt want t be disturbed by visitrs, frm STAND-BY mde, lng tuch (2-3 sec.) the key. The LED f the key turns n and remains permanently red. In case f a call, the image with the visitr is displayed, but the terminal des nt ring. - T exit the silent mde, shrt tuch the key. The LED becmes white again. 9. IMAGE ADJUSTMT fr the smart+ VIDEO terminals. This adjustment is made nly if the clrs n the display d nt cincide with reality. With the terminal in MONITORING mde, adjust the image with very small rtatins f the clr and brightness adjusters n the back f the terminal.

8 5.2 Use f the advanced terminal advanced 7 vide Scrll up k Menu / k Scrll dwn Call answer, audi-vide mnitring (setting mde: ringtne selectin) 7 6 Settings f the audi-vide terminals Access cmmand (setting mde: call duratin) Vlume adjustment during talk, Mute (setting mde: call sund vlume) Auxiliary cmmand (aut gate, garage dr, utdr lighting etc.) 1. CALL RINGTONE 2. CALL DURATION 3. CALL RINGTONE VOLUME Picture taking 100 stred pictures NOTE: The advanced vide terminal fulfills all the smart+ functins (1-9), as well as the functins presented hereinafter. 10. PICTURE TAKING. At each call frm the utdr panel, the terminal autmatically stres the picture f the visitr. During the talk, yu can take additinal pictures, by tuching the key. The terminal can stre maximum 100 pictures, and when the memry is full, the ldest pictures are deleted, n the First In First Out principle. 11. VISUZALIZE/DELETE PICTURES. Tuch the k key and enter the Menu. Successively tuch the k key until yu reach the Pictures menu. Using the keys, chse View Pictures r Delete all. Press k t select. In View Pictures, scrll using the keys and visualize all the pictures. In Delete all, if yu press the k key, all pictures are deleted. After 12 sec. f nt using the Menu keys, the terminal autmatically returns t the nrmal functining mde. 12. IMAGE ADJUSTMT fr the advanced VIDEO terminals. This adjustment is made nly if the clrs n the display d nt cincide with reality. With the terminal perating, tuch the k key and enter the Menu. Successively tuch the k key, until yu enter the Display menu. Scrll using the keys and tuch k t select Brightness, Chrma r Cntrast. Adjust the parameters using the keys and tuch k t set the desired value. Select Exit t exit the Display menu. Lng tuch keys, simultaneusly. The terminal enters settings mde and issues a lng warning beep. Yu have 2 min. available fr settings 1, 2 and 3. CALL RINGTONE The first ringtne. Tuch the key. Listen t the first ringtne. The secnd ringtne. Tuch the key again. The secnd ringtne will play. Fr the third, the furth and the fifth ringtne, repeat the prcedure abve. The last played ringtne remains stred fr the call.

9 CALL DURATION The terminal rings nly nce. Tuch the key again. The terminal rings twice. Tuch the key fr the secnd time. 2 The terminal rings three times. Tuch the key fr the third time. The terminal rings cntinuusly fr 1 minute. Tuch the key fr the furth time. The last played versin remains stred fr call. CALL RINGTONE VOLUME Successively tuch the key, until yu reach the desired vlume f the ringtne. Each vlume level, frm 1 t 7, is signaled by an increase in the 3 intensity f the selected ringtne. The last played versin remains stred fr the call. 4 The settings mde will autmatically clse after 7 sec. frm the last actin. 6.2 TIME and DATE setting fr the advanced terminal Tuch the k key and enter the Menu. Cntinue t tuch the k key until yu reach the Time & Date. Scrll using the keys and tuch k t select the Time r the Date. Adjust the parameters using the keys and tuch the k key fr the crrect setting. Select Exit t exit the Time & Date menu. 7 Prgramming the audi-vide terminals The manual prgramming f the address f the terminal (apartment number/ family) All Tuch Line terminals are prgrammed frm the factry with address 1. The terminals frm apartments with numbers frm 2 t 9999 will be prgrammed with the number (address) f the respective apartment / family. The address f the terminals with numbers frm 2 t 20 can be manually prgrammed, accrding t the fllwing prcedure: 0. The entire dr phne system is installed and set under tensin. 1. G t the place where the SCU central unit f the installatin is munted. Lng press (2-3 sec.) the PROG buttn. The red LED turns n. 2. Return t the terminal and lng tuch the key. Yu will hear a lng beep. - Prgramming address 1: tuch the key nce. A shrt beep is issued. - Prgramming address 2: tuch the key twice. Tw shrt beeps are issued. - Prgramming address 3: tuch the key three times. Three shrt beeps are issued. Repeat the prcedure fr the next addresses, until 20. NOTE: After pressing the key n times, wait a few secnds fr the acustic cnfirmatin f the terminal fr address n. The terminal will issue n beeps fr address n prgrammed in the terminal. 3. Return t the SCU central unit f the installatin. Press the PROG buttn fr a shrt time. The red LED turns ff. The installatin returns t nrmal functining mde. Fr prgramming the Tuch Line terminals installed in buildings with a high number f apartments (higher than 15), purchase the special terminal address prgramming device frm the prducer. 8

10 8 Use f the utdr panels Name 5 Name 4 IR LED (night lighting) Orientable vide camera Electrnic display Name 4 Name 3 Name 1 Tuch key with the name f the family Name 4 Name 3 Name 2 Tuch keybard Name 1 RFID reader 9 1 Fam. Huse 8 Fam. Huse Fam. Apartment building 1. STAND-BY. The keys with the names f the residents/ the call keybard are permanently backlighted during night. The red LED blinks and signals the pssibility f vide mnitring CALL + TALK frm utdr panels with maximum 10 families. Tuch the key crrespnding t the name f the family yu are lking fr. The panel signals the actin acustically, with a ding-dng. The call lasts maximum 1 minute. Each tuch f the key reinitiates the call. If the resident answers, the talk mde is activated. The talk takes place hands-free, during maximum 2 min CALL + TALK frm utdr panels fr apartment buildings. Use the keybard t dial the number f the desired apartment (maximum 4 digits). The panel signals the actin acustically, with ding-dng. The key turns red and the fllwing message appears n the display: The call lasts maximum 1 minute. P r e s s If yu d nt knw the number f the apartment, search fr the name f the resident in the electrnic list by tuching the key. Successively tuch the key until the name f the family and the apartment numbers shw up n the display: 1 : N a m e 1 If the resident answers, talk mde is initiated. The message is shwn n the display: C a l l i n g : N a m e 1 T a b r t d i a l 2 : N a m e 2 3 : N a m e 3 - N e x t page key turns green and the fllwing S P E AK! The cnversatin takes place hands-free, during maximum 2 min. 4. RFID card ACCESS. Apprach the RFID card t the area marked with the symbl. The panel cmmands the pening f the dr/gate and issues a cnfirmatin beep sequence. At the panel fr apartment buildings, the display shws the fllwing message: The dr/gate remains pen fr maximum 10 sec. A C C E S G R A NTE D

11 9 Maintenance f the dr phne cmpnents The Tuch Line audi-vide terminals must be kept away frm water, lime r any liquid substances, blws, fumes, pwders, dust etc. In case f renvatin activities, the entire surface f the terminals will be prtected with plastic fil. The Tuch Line utdr panels must be kept away frm crrsive substances, lime and blws. Fr cleaning the glass screens, use a clean clth and a special slutin fr glass washing. DO NOT und the electrical cnnectins f the vide dr phne installatin cmpnents. DO NOT shrt-circuit the electrical cnnectins f the vide dr phne installatin cmpnents. The accumulatr, ptinally cnnected t the central unit f the vide dr phne installatin, must be replaced in case f defects r after exceeding its lifespan. 10 Warranty a. Warranty is granted accrding t the current legislatin in the buyer's cuntry f residence, based n the purchase dcuments. b. Warranty is granted fr the hidden defects f the cmpnents used in prductin and in case f the system nt functining accrding t the present user manual. WARRANTY IS NOT GRANTED FOR: c. Inapprpriate installatin and use. d. Deteriratin, intentinal blws. e. Unauthrized interventins t any f the cmpnents f the installatin. f. Theft, fire, natural disasters. g. Lack f prtectin f the installatin cmpnents in case f renvatin activities. 10

12 R ELECTRA Building Cmmunicatins GmbH Bischffgasse 5/3-4, 1120 Wien - AT supprt@bellcme.cm ELECTRA s.r.l Bd. Chimiei nr.8,iași RO BELLCOME is a trademark f ELECTRA Grup - N EUIPO - Alicante, Spain BELLCOME is a trademark f ELECTRA Grup - N MPI - Ciudad de Mexic, Mexic ELECTRA is a trademark f ELECTRA Grup - N EUIPO - Alicante, Spain BELLCOME/ELECTRA prducts are registered as Industrial Mdels at EUIPO - Alicante, Spain The prducts are CE certified. Certificate by R 709 ICPE The prducts are NOM certified. Certified by NYCE The prducts cntain UL-cmpliant printed circuit bards. Certificate n. E The prducts are manufactured under Quality and Envirnment Management System ISO 9001:2008 ISO 14001:2009 Certificates n , by TÜV HESS Designed and prduced by ELECTRA Made in EU USM.XTM(A)02.BLY04