Connection. control contact M ~ S DCF L N. 1. Setting actual time SET. Offset. Su/Wi OFF. min. OK Confirm with button. Set actual hour with buttons

Transcription

1 LEXIC Astro time switc Rex2000 D41 Astro , , 037 NT GB Operating instructions Tecnical data Supply voltage: 230V 0V V Frequency: 50/0Hz Consumption: ca. 1,1 W Contact rating: cangeover contact 1A 250V~µ cos ϕ = 1 Accuracy: ±1s/d Teral capacity: single strand multi strand 1,5 to 4 mm 2 1,5 to 2,5 mm 2 Additional switcing times: 2 Battery reserve: years Position finding: resolution 1 Control line lengt: max. 50 m Control signal: 230V AC/ca. 2mA 0V AC/ca. 2mA V AC/ca. 2mA Control impulse: 20ms Storage ambient: -20 C to +0 C Working ambient: -20 C to +55 C Connection L N M ~ S DCF control contact 250V~ Frankfurt/Main 2200W 2200W 100W 1300W 00W 00W Antenna DCF77 reference order separately Select wit buttons none for no setting or for manual setting. If cosen Set our wit buttons. Safety notes Installation of tese products sould only be undertaken by a qualified electrician. Te operational and electrical safety is only guaranteed, if te product is installed using its proper accessories, in a position as specified in te installation instructions (distribution panel). Any interference wit te product makes te guarantee void. If te time switc is mounted near equipment were eat produced raises te local ambient above 55 C. A space sould be put between te time switc and te equipment (e.g. 1 2 space module code or 1 space module code ). Function Te device serves to switc on and off a consumer during te dawn and dusk witout an external poto-electric cell. Te sunrise and sunset will be calculated by te entered data. At tese times te connected consumer will be switced. Wit additional programmed switcing times te consumer can be switced or. By means an outside attaced antenna, reference (order separately), it is possible to receive te time code DCF77. By means an additional connected control contact te consumer switcing can be controlled. If no button is pressed for 0 seconds during programg te time switc goes back to te start position. Programs are displayed wit a imum segment size of 30 utes. During calculation data te circular segmented display blinks. Te summer-/winter cangeover can be programmed for and or automatic operation. Presentation Set time Set date Set coordinate position Set time Set time Receipt of time code DCF77 d = day Button Menu activates te menu or breaks off te process Button moves te flas Symbol for automatic operation Hour Minute d WEmonNS y Summer Winter y = year WE = west, east NS = nort, sout mon = mont Button us and plus canges te values Set offset Set summer-/real time Display sunrise and offset Display sunset and offset State of contact = = Button confirms te input 1. Setting actual time te menu. Set actual our wit buttons and confirm wit Set actual ute wit buttons. Confirm te setting wit 2. Setting actual date Button activates te menu. Select set date wit button Set day wit Set mont wit Set year wit 3. Setting coordinate position te menu. Select te setting coordinate position wit button Te manufacturer s setting 9 E51 N will be displayed. Set degree of longitude wit button in direction west. Setting from 000 WE to 0 W. or Set degree of longitude wit button in direction east. Setting from 000 WE to 0 E. Set degree of latitude wit button in direction nort. Setting from 00 NS to 90 N. Set degree of latitude wit button in direction sout. Setting from 00 NS to 90 S. te menu. Select wit 4. = Setting additional time Te function is for switcing te connected consumer only after sunset to te set time. If te set time is before sunset te switcing will not be executed. E E N NS Set utes wit buttons. 5. = Setting additional time Te function is for switcing te connected consumer only before sunrise to te set time. If te set time is after sunrise te switcing will not be executed. te menu. Select wit Select wit buttons none for no setting or for manual setting. If cosen Set our wit buttons. Set utes wit buttons.

2 . Setting offset Te time switc will switc at te calculated times of sunrise and sunset. By setting a differential time up to ±0 utes te offset will be displaced to te times of sunrise and sunset. Example: At +30 utes differential time te time switc will switc 30 utes after sunrise and 30 utes before sunset. At -30 utes differential time te time switc will switc 30 utes before sunrise and 30 utes after sunset. t max. ± 0 max. ± 0 te menu. Select offset wit Set utes wit button or. 7. Setting summer-/ winter cangeover Coice Euro Gb USA none Beginning of summertime last Sunday in Marc last Sunday in Marc 1 ST Sunday in April No cangeover Set day wit buttons and confirm wit Set mont wit buttons and confirm wit Set year wit buttons and confirm wit End of summertime last Sunday in October 4t Sunday in October last Sunday in October No cangeover Free programg summer-/wintercangeover Notern emispere Put in te date at wic te summer time starts and ends at your location/in your country. Te weekday is automatically allocated to te date. Soutern emispere On te soutern emispere te date at wic te summer time starts/ends must be programmed for te same year. Setting beginning of summertime Country / area d d d EU GB only Nort America mon mon mon y y y 8. Display of sunrise and offset te menu. Select symbol wit Terating inquiry wit 9. Display of sunset and offset te menu. Select symbol wit Terating inquiry wit 10. Radio receiving DCF77 Only wen te antenna is connected After connecting to mains supply or after a reset te time switc tries to receive te time code. Te antenna symbol is blinking. If te time switc recognises tat an antenna is connected by means blinking te receiving wave will be indicated te data transfer takes place. After receiving te data te antenna symbol will be indicated continuous. Every full our te time switc tries to receive te time code. Reset Reset 1 Switcing program remains Press buttons let free togeter. Reset 2 and Attention! Te memory will be deleted. All entered data get lost. Te time switc is designed, tat a reset 2 is not required. Te setting of actual time and time-of-day are indispensable for calculation of sunrise and sunset. Do not forget to actualize all oter data (date, coordinate position etc.). Press buttons Let button free Hold buttons for anoter 2 seconds. After freeing buttons time will be displayed Set actual our wit buttons and confirm wit Set actual ute wit buttons. Confirm te setting wit ZonE will be displayed togeter. Function diagram control contact Te control signal as to be available 20ms to control contact to release a switcing order. Program 1 0 Control contact 1 0 Relay 1 output 0 Mains failure Wen mains failure appens no information is displayed. Te time switc executes no switcing operations. All inputs are possible. After pressing a button te circular segment display is blinking in automatic operation. One ute after last button operation te information will not longer be displayed. Te automatic cangeover depends on your country / area. Coose te appropriate setting for your country / area. If no cangeover is required coose none. te menu. Select wit Coose te region of summer-/winter (see table) wit buttons. Setting end of summertime Set day wit buttons and confirm wit Set mont wit buttons. Is no antenna is connected te antenna symbol will not be indicated. Te actual time and date ave to be set manually. 11. Continuous switcing / Continuous switcing Press button for 2 seconds. Te circular segment display and on will be indicated. Terating continuous switcing Press Continuous switcing Press button for 2 seconds. Te circular segment display will not be displayed and indication off. Terating continuous switcing Press O Setting time-of-day To set te time-of-day use te enclosed time-of-day map. Locate for your area te difference of time to UTC (Universal time coordinated) and set tis value wit buttons. Set a positive value wit Example: UTC +1 = central european time or Set a negative value wit Example: UTC -1 Wile te circular segment display is blinking te sunrise and sunset will be calculated. O

3

4

5

6

7

8