FIRE-RESISTANT SYSTEMS

Transcription

1 Standard supporting constructions FIRE-RESISTAT SYSTEMS on-standard supporting constructions Accessories

2

3 STADARD SUPPORTIG OSTRUTIO ABLE TRAYS KBS60 Perforated cable tray -403 KPBS Joiner for able tray (BS) -403 ABLE LADDERS KLBS60 able ladder KL (BS) -404 KPBSKL Joiner for cable ladder (BS) -404 BK Fixing clamp -404 VERTIAL MOUTIG KL60 able ladder -405 LVBS60 Joiner for vertical cable ladder (BS) -405 HDAB Stand-off bracket -405 ABLE LAMPS DR15.30 Supporting profile -406 SYBS Stop for Y cable clamp (BS) -406 HDH1 able clamp for 1 cable -40 MOUTIG SYSTEMS LOMEGA150 Bracket / eiling profile -40 OMEGA90 Open suspension bracket -408 VOMEGA Joining piece -408 KLBS lick-on bracket (BS) -409 HDWK Welded bracket -410 HDBSKLEM lamp for fixing of threaded rod (BS) -410 MPL Assembly profile clippable -411 HDHSLEL Single ceiling profile clippable -41 LHS Adapter for HDHSLEL -41 HDVS41.45 Assembly accessory -413 TIM Threaded rod (DI 95) -413 TEHIAL IFORMATIO -415 O-STADARD SUPPORTIG OSTRUTIO ABLE TRAYS KBSI60 able tray with interlocking ends -49 ABLE LADDERS KLLIBS60 able ladder interlocking ends (BS) -49 LBS Strip (BS) -430 QL Quick link with screw cap -430 HDVS41.05 Assembly accessory -431 HDAB Stand-off bracket -431 MOUTIG SYSTEMS HDWK Welded bracket -431 HDBSKLEM lamp for fixing of threaded rod -43 HDWKM Heavy welded bracket -43 HDHSMU50 eiling profile medium heavy -433 HDTSU Spacer for HDHSMU HSMES Single ceiling profile -434 DKBS Double bracket (BS) -434 MPL lippable assembly profile -435 HDHSLEL Single ceiling profile clips -435 LHS Snap-in adapter for HDHSLEL -436 HDVS41 Assembly accessory -436 TIM Threaded rod (DI 95) -43 TEHIAL IFORMATIO

4 ASSEMBLY AESSORIES AESSORIES B Bolt (DI 933) -450 M ut (DI 934) -450 VM6334 oupling nut (DI 6334) -450 VM Toothed round head bolt / flange nut -451 VMK Round head square neck bolt / flange nut -451 GM41 Sliding nut for supporting profile -451 RO Giant washer (DI 15-1 A) -45 RO Flat giant washer (DI 901)

5 ITRODUTIO The safety of people in case of fire can only be guaranteed if all the necessary safety installations remain operational. able support systems with preservation of functionality maintain their supporting function in case of fire and thereby contribute to the continuing operation of an installation. Until the European standard is published, VERGOKA uses, the DI Standard to test and certify the preservation of functionality of its installations. DI The DI Standard 410 part 1 defines the requirements and testing method for fire resistance of electric cable support systems required to maintain its integrity. The standard, limited to 1KV, specifies 3 categories of functional maintenance as follows: E30, E60 and E90. These categories designate the period of time for which the integrity of the installation is maintained. To determine which installations must have functional integrity in case of fire, we refer to local regulations. IMPLEMETATIO able support systems with functional integrity are tested for one configuration, which may be altered under certain conditions as long as the functional integrity of the cables isn t negatively influenced by the installation. Permitted deviations are: - The load per metre and/or the support distance may be reduced; - The width of the trays/ladders and brackets may be reduced; - The number of trays/ladders may be reduced; - The horizontal distance between the trays and the ladders may be adapted; - The material gauges may be increased; - A setup may be horizontally or vertically offset, as long as the offset sections are adequately supported to prevent buckling or shearing; - Any certified soffit fixed support system may also be used for wall mounting; - A partition may be added to separate the cables with functional integrity from other cables; - A bolted connection may be replaced by a welded connection. STADARD SUPPORTIG OSTRUTIO The supporting constructions described in DI Standard 410 part 1 are also named cable independent supporting constructions. According to the regulations in Germany, all the cables with functional integrity according to DI Standard 410 part 1 are applicable to these constructions. These constructions satisfy the following conditions: - Support distance Material gauge of the trays/ladder walls 1,5 - Height of the trays/ladders = 60 - Width of the ladders Width of the trays 300 (perforation rate 15±5%) - Rung distance of the ladders The extent of the arm is supported by a threaded rod fixed to the soffit - The load is 10kg/lm for cable trays and 0kg/lm for cable ladders Standard supporting constructions are tested according to DI Standard 410 part 1 and certified with GS certificates (Gutachterlichen Stellungnahme). These certificates can be found on our website. O-STADARD SUPPORTIG OSTRUTIO These are supporting constructions that don t comply with the conditions for standard supporting constructions. on-standard supporting constructions are also tested in accordance with DI Standard 410 part 1. According to the German regulation, these supporting constructions are cable specific. That means that in these constructions, the cables with functional integrity must be of the same type and brand as specified in the ABP certificate (Allgemeines Bauaufsichtliches Prüfzeugnis). DI Standard 410 part 1 is a German standard. on-german test institutes can also be accredited to test according to this standard. However, our experience is that the German market doesn t recognise certificates issued by these non-german institutes. Please verify what the regulations are in your market. -393

6 FAQ Are there any restrictions regarding the installation of supporting constructions with functional integrity below ground? Answer: o, as long as the construction to be installed matches the functional integrity requirements. Which anchors/plugs should be used? Answer:ertificated plugs or anchors with preservation of functionality that at least matches that of the supporting construction. These may be loaded to a maximum of 500. How many levels can I mount on a ceiling profile? Answer: That depends on the relevant certificate. ormally one may assume that the maximum tensile stress and maximum bending moment on the ceiling profile may not be larger than the certificated setup. May I lay cables without functional integrity onto an installation with functional integrity? Answer: Yes, as long as the cables with functional integrity are not influenced negatively. For example, the cables with and without functional integrity must be separated by a partition. May I use coated cable trays or ladders with functional integrity? Answer: The authorised use of coating on a cable tray needs to be specifically mentioned in the certificate. The most recent certificates obtained by Vergokan authorise the use of coatings. onsult your Vergokan contact to establish which certificates are applicable. May I use a galvanised supporting construction? Answer: Yes, it s also specifically mentioned in the certificate. May I use a supporting construction in stainless steel? Answer: Yes, as long as the load performance and other dimensions (such as material gauge) remains the same. onsult your Vergokan contact to establish which stainless steel products may be used. May one use intersections, bends and tees in constructions with functional integrity? Answer: Accessories are allowed as long as they are supported directly before and after each piece. May I fit a cover onto a supporting construction with functional integrity? Answer: A cover may have a negative impact on the cables in case of fire. A cover needs to be specifically tested and included in the certificate. Vergokan has not yet carried out tests with covers. May I use a vertical installation with functional integrity in an open space (away from a wall)? Answer: o, vertical installations must be fixed onto a wall. For further questions, please contact our technical advisers. -394

7 -395

8 STADARD SUPPORTIG OSTRUTIO -396

9 STADARD SUPPORTIG OSTRUTIO FIRE-RESISTAT SYSTEMS Standard supporting constructions -39

10 STADARD SUPPORTIG OSTRUTIO -398

11 STADARD SUPPORTIG OSTRUTIO -399

12 STADARD SUPPORTIG OSTRUTIO -400

13 STADARD SUPPORTIG OSTRUTIO -401

14 STADARD SUPPORTIG OSTRUTIO -40

15 STADARD SUPPORTIG OSTRUTIO KBS60 Perforated cable tray Max. load Optional finish HD 10 da Pre-galvanised HD kg/m u Stock Unit HD KBS P m HD KBS P m HD KBS P m HD KBS P m The technical information for this product can be found at the end of this chapter. KPBS Joiner for able tray (BS) For joining of KBS60. Optional finish HD Pre-galvanised HD kg/piece u Stock Unit HD KPBS P piece HD KPBS P piece HD KPBS P piece HD KPBS P piece Fix with: HD VMK M P piece Use all perforations

16 STADARD SUPPORTIG OSTRUTIO KLBS60 able ladder KL (BS) Side walls : L-profile -rungs Usable inner height Rung distance Max. load da Pre-galvanised HD kg/m u Stock Unit - KLBS m - KLBS m - KLBS m KPBSKL Joiner for cable ladder (BS) Pre-galvanised HD kg/piece u Stock Unit - KPBSKL piece - KPBSKL piece - KPBSKL piece Fix with: HD VMK M P piece BK Fixing clamp For fixing of the cable ladder KLBS on the wall bracket. Two pieces per bracket. Optional finish HD Pre-galvanised HD kg/piece u Stock Unit HD BK P piece To order per full packaging. Included: Bolt B6.0, nut RM6 and VFKG

17 STADARD SUPPORTIG OSTRUTIO KL60 able ladder an only be used for vertical mounting Side walls : perforated L-profile -rungs Usable inner height Rung distance Optional finish HD Pre-galvanised HD kg/m u Stock Unit HD KL P m HD KL P m HD KL P m Fix with: HD LVBS P piece LVBS60 Joiner for vertical cable ladder (BS) Only for vertical mounting For joining of KL60 Optional finish HD Pre-galvanised HD kg/piece u Stock Unit HD LVBS P piece Fix with: HD VMK M P piece To order per full packaging. HDAB Stand-off bracket Used for vertical mounting of the cable ladder. kg/piece u Stock Unit HDAB P piece Fix with: HD VM M P piece To order per full packaging. -405

18 STADARD SUPPORTIG OSTRUTIO DR15.30 Supporting profile For wall and ceiling constructions Optional finish HD Pre-galvanised HD kg/piece u Stock Unit HD DR P piece HD DR P piece HD DR P piece HD DR P piece HD DR P piece HD DR P piece HD DR m Max. support distance = 300. Use of cable clamps, type H. Applicable with all DI certified cables. Fixing to the ceiling or wall with certified concrete anchors. Distance between the anchors max. 50. SYBS Stop for Y cable clamp (BS) Optional finish HD Pre-galvanised HD kg/piece u Stock Unit HD SYBS P piece To order per full packaging. -406

19 STADARD SUPPORTIG OSTRUTIO HDH1 able clamp for 1 cable Applicable in case of -rungs 15x30. kg/piece u Stock Unit HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece HDY P piece To order per full packaging. Max. 1 cable per cable clamp LOMEGA150 Bracket / eiling profile Optional finish HD Pre-galvanised HD kg/piece u Stock Unit HD LOMEGA P piece HD LOMEGA P piece HD LOMEGA P piece HD LOMEGA P piece HD LOMEGA P piece HD LOMEGA P piece Fix with: HD B M P piece HD RO M P piece HD M M P piece The technical information for this product can be found at the end of this chapter. To order per full packaging. Ends held up through a threaded rod TIM. Use the VOMEGA to avoid compression of the profile. When ordering, add 100 to the width. E.g. KBS 300 : use LOMEGA

20 STADARD SUPPORTIG OSTRUTIO OMEGA90 Open suspension bracket Pre-galvanised HD kg/piece u Stock Unit - OMEGA P piece - OMEGA P piece - OMEGA P piece - OMEGA P piece - OMEGA P piece To order per full packaging. Ends held up by threaded rod TIM10. Use the VOMEGA to avoid compression of the profile. When ordering, add 100 to the width. E.g. KBS 300 : use OMEGA VOMEGA Joining piece Optional finish HD Pre-galvanised kg/piece u Stock Unit VOMEGA P piece HDVOMEGA piece The technical information for this product can be found at the end of this chapter. To order per full packaging. For wall mounting 1 piece, for double mounting pieces, back to back. -408

21 STADARD SUPPORTIG OSTRUTIO KLBS lick-on bracket (BS) Pre-galvanised HD kg/piece u Stock Unit - KLBS piece - KLBS piece - KLBS piece - KLBS piece Fix with: - VM M P piece The technical information for this product can be found at the end of this chapter. ompletely clipsable, secured with VM4.40. Use LHS for syetrical mounting. lamp for fixing of threaded rod (HDBSKLEM) to order separately. -409

22 STADARD SUPPORTIG OSTRUTIO HDWK Welded bracket kg/piece u Stock Unit HDWK P piece HDWK P piece HDWK P piece HDWK P piece HDWK P piece HDWK P piece Fix with: HD B M P piece HD RO M P piece HD M M P piece The technical information for this product can be found at the end of this chapter. To order per full packaging. For syetrical mounting, use HDB HDRO1 + HDM1. HDBSKLEM lamp for fixing of threaded rod (BS) Very fast securing of the threaded rod TIM, using a clamping bold. Applicable on HDWK and KLBS. kg/piece u Stock Unit HDBSKLEM P piece To order per full packaging. Ends held up through threaded rod TIM. o additional bolts and nuts needed. Threaded rod can be mounted in 1 continuous length. Diameter of the threaded rod TIM not of influence. lamping bolt to be tightened with angular momentum of 10 m. -410

23 STADARD SUPPORTIG OSTRUTIO MPL Assembly profile clippable Pre-galvanised HD kg/piece u Stock Unit - MPL P piece - MPL P piece - MPL P piece - MPL P piece Fix with: HD M8 - - M P piece HD M M P piece HD M1 - - M P piece HD RO8 - - M P piece HD RO M P piece HD RO1 - - M P piece To order per full packaging. To be fixed with threaded rods to the ceiling: - TIM8 + nut M8 + RO8 - TIM10 + nut M10 + RO10 - TIM1 + nut M1 + RO1-411

24 STADARD SUPPORTIG OSTRUTIO HDHSLEL Single ceiling profile clippable eiling profile: HDMP41.1 Welded headplate of 10 x 10 Max. load 1000 da kg/piece u Stock Unit HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece The technical information for this product can be found at the end of this chapter. Also applicable for double mounting. Fixed with anchoring bolts. For syetrical mounting, to fix with anchoring bolts M1. LHS Adapter for HDHSLEL For syetrical mounting of KLBS Pre-galvanised HD kg/piece u Stock Unit - LHS P piece To order per full packaging. -41

25 STADARD SUPPORTIG OSTRUTIO HDVS41.45 Assembly accessory To be used when mounting the threaded rod to the wall. kg/piece u Stock Unit HDVS P piece The technical information for this product can be found at the end of this chapter. To order per full packaging. TIM Threaded rod (DI 95) Optional finish HD Electro zinc-plated Max. load (in da) TIM8 550 TIM TIM HD kg/m u Stock Unit HD TIM8 - M P m HD TIM10 - M P m HD TIM1 - M P m Fix with: HD M8 - - M P piece HD M M P piece HD M1 - - M P piece HD RO8 - - M P piece HD RO M P piece HD RO1 - - M P piece -413

26 TEHIAL IFORMATIO -414

27 TEHIAL IFORMATIO KBS60 Technical information -415

28 TEHIAL IFORMATIO LOMEGA150 Technical information -416

29 TEHIAL IFORMATIO VOMEGA Technical information -41

30 TEHIAL IFORMATIO KLBS Technical information -418

31 TEHIAL IFORMATIO HDWK Technical information -419

32 TEHIAL IFORMATIO HDHSLEL Technical information -40

33 TEHIAL IFORMATIO HDVS41.45 Technical information -41

34 O-STADARD SUPPORTIG OSTRUTIO -4

35 O-STADARD SUPPORTIG OSTRUTIO FIRE-RESISTAT SYSTEMS on-standard supporting constructions -43

36 O-STADARD SUPPORTIG OSTRUTIO -44

37 O-STADARD SUPPORTIG OSTRUTIO -45

38 O-STADARD SUPPORTIG OSTRUTIO -46

39 O-STADARD SUPPORTIG OSTRUTIO -4

40 O-STADARD SUPPORTIG OSTRUTIO -48

41 O-STADARD SUPPORTIG OSTRUTIO KBSI60 able tray with interlocking ends Interlocking ends Alternative perforations Return flanges Optional finish HD Pre-galvanised HD kg/m u Stock Unit HD KBSI P m - KBSI P m HD KBSI P m HD KBSI P m - KBSI P m HD KBSI P m HD KBSI P m - KBSI P m HD KBSI P m HD KBSI P m - KBSI P m HD KBSI P m HD KBSI P m HD KBSI P m HD KBSI P m - KBSI P m HD KBSI P m Fix with: HD VMK M P piece The technical information for this product can be found at the end of this chapter. KLLIBS60 able ladder interlocking ends (BS) Usable inner height 44 Rung distance Optional finish HD 150 Pre-galvanised HD kg/m u Stock Unit HD KLLIBS m HD KLLIBS m HD KLLIBS m HD KLLIBS m The technical information for this product can be found at the end of this chapter. -49

42 O-STADARD SUPPORTIG OSTRUTIO LBS Strip (BS) Optional finish HD Pre-galvanised HD kg/piece u Stock Unit HD LBS P piece HD LBS P piece HD LBS P piece HD LBS P piece HD LBS P piece HD LBS P piece HD LBS P piece HD LBS P piece HD LBS P piece The technical information for this product can be found at the end of this chapter. QL Quick link with screw cap Optional finish HD Electro zinc-plated HD kg/piece u Stock Unit HD QL P piece HD QL P piece To order per full packaging. - QL6: for fixing console to LBS. - QL8: for fixing LBS to VS

43 O-STADARD SUPPORTIG OSTRUTIO HDVS41.05 Assembly accessory kg/piece u Stock Unit HDVS P piece To order per full packaging. HDVS41.41 / HDVS41.4: Bolt B10.40 included. HDAB Stand-off bracket Used for vertical mounting of the cable ladder. kg/piece u Stock Unit HDAB P piece Fix with: HD VM M P piece To order per full packaging. HDWK Welded bracket kg/piece u Stock Unit HDWK P piece HDWK P piece HDWK P piece HDWK P piece HDWK P piece HDWK P piece Fix with: HD B M P piece HD RO M P piece HD M M P piece The technical information for this product can be found at the end of this chapter. To order per full packaging. For syetrical mounting, use HDB HDRO1 + HDM

44 O-STADARD SUPPORTIG OSTRUTIO HDBSKLEM lamp for fixing of threaded rod Very fast securing of the threaded rod TIM, using a clamping bold. Applicable on HDWK and KLBS. kg/piece u Stock Unit HDBSKLEM P piece To order per full packaging. Ends held up through threaded rod TIM. o additional bolts and nuts needed. Threaded rod can be mounted in 1 continuous length. Diameter of the threaded rod TIM not of influence. lamping bolt to be tightened with angular momentum of 10 m. HDWKM Heavy welded bracket For direct fixing on the wall and also for fixing on the ceiling profile kg/piece u Stock Unit HDWKM P piece HDWKM P piece HDWKM P piece HDWKM P piece The technical information for this product can be found at the end of this chapter. To order per full packaging. -43

45 O-STADARD SUPPORTIG OSTRUTIO HDHSMU50 eiling profile medium heavy Max. load 100 da kg/piece u Stock Unit HDHSMU P piece HDHSMU P piece HDHSMU P piece HDHSMU P piece HDHSMU P piece HDHSMU P piece HDHSMU P piece HDHSMU P piece HDHSMU P piece The technical information for this product can be found at the end of this chapter. HDTSU Spacer for HDHSMU50 kg/piece u Stock Unit HDTSU P piece To order per full packaging. Included: bolt HDB10.80, HDRO10 and nuts HDM

46 O-STADARD SUPPORTIG OSTRUTIO HSMES Single ceiling profile eiling profile: MP41.41S Welded headplate: 10x10 Max. load Optional finish HD 1800 da Electro zinc-plated HD kg/piece u Stock Unit HD HSMES P piece HD HSMES P piece HD HSMES P piece HD HSMES P piece HD HSMES P piece HD HSMES P piece HD HSMES P piece The technical information for this product can be found at the end of this chapter. Also applicable for double mounting. DKBS Double bracket (BS) For fixing to ceiling profile HSMES. Optional finish HD Pre-galvanised HD kg/piece u Stock Unit HD DKBS P piece HD DKBS P piece HD DKBS P piece HD DKBS P piece HD DKBS P piece The technical information for this product can be found at the end of this chapter. To order per full packaging. -434

47 O-STADARD SUPPORTIG OSTRUTIO MPL lippable assembly profile Pre-galvanised HD kg/piece u Stock Unit - MPL P piece - MPL P piece - MPL P piece - MPL P piece - MPL P piece - MPL P piece - MPL P m Fix with: HD M8 - - M P piece HD M M P piece HD M1 - - M P piece HD RO8 - - M P piece HD RO M P piece HD RO1 - - M P piece The technical information for this product can be found at the end of this chapter. To order per full packaging. HDHSLEL Single ceiling profile clips eiling profile: HDMP41.1 Welded headplate of 10 x 10 Max. load 1000 da kg/piece u Stock Unit HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece HDHSLEL P piece Also applicable for double mounting. Fixed with anchoring bolts. For syetrical mounting, to fix with anchoring bolts M

48 O-STADARD SUPPORTIG OSTRUTIO LHS Snap-in adapter for HDHSLEL For syetrical mounting of KLBS Pre-galvanised HD kg/piece u Stock Unit - LHS P piece To order per full packaging. HDVS41 Assembly accessory To be used when mounting the threaded rod to the wall. kg/piece u Stock Unit HDVS P piece To order per full packaging. -436

49 O-STADARD SUPPORTIG OSTRUTIO TIM Threaded rod (DI 95) Optional finish HD Electro zinc-plated Max. load (in da) TIM8 550 TIM TIM HD kg/m u Stock Unit HD TIM8 - M P m HD TIM10 - M P m HD TIM1 - M P m Fix with: HD M8 - - M P piece HD M M P piece HD M1 - - M P piece HD RO8 - - M P piece HD RO M P piece HD RO1 - - M P piece -43

50 TEHIAL IFORMATIO -438

51 TEHIAL IFORMATIO KBSI60 Technical information -439

52 TEHIAL IFORMATIO KLLIBS60 Technical information -440

53 TEHIAL IFORMATIO LBS Technical information -441

54 TEHIAL IFORMATIO HDWK Technical information -44

55 TEHIAL IFORMATIO HDWKM Technical information -443

56 TEHIAL IFORMATIO HDHSMU50 Technical information -444

57 TEHIAL IFORMATIO HSMES Technical information -445

58 TEHIAL IFORMATIO DKBS Technical information -446

59 TEHIAL IFORMATIO MPL Technical information -44

60 ASSEMBLY AESSORIES -448

61 ASSEMBLY AESSORIES FIRE-RESISTAT SYSTEMS Accessories -449

62 ASSEMBLY AESSORIES B Bolt (DI 933) Optional finish HD Electro zinc-plated HD kg/piece u Stock Unit HD B M P piece HD B M P piece HD B M P piece HD B M P piece HD B M P piece To order per full packaging. M ut (DI 934) Optional finish HD Electro zinc-plated HD kg/piece u Stock Unit HD M8 - M P piece HD M10 - M P piece HD M1 - M P piece To order per full packaging. VM6334 oupling nut (DI 6334) Electro zinc-plated HD kg/piece u Stock Unit - VM8 4 M P piece - VM10 30 M P piece - VM1 36 M P piece To order per full packaging. -450

63 ASSEMBLY AESSORIES VM Toothed round head bolt / flange nut Electro zinc-plated HD kg/piece u Stock Unit - VM M P piece HD VM M P piece HD VM6.0 - M P piece - VM M P piece To order per full packaging. According to DI VMK Round head square neck bolt / flange nut Optional finish HD Electro zinc-plated HD kg/piece u Stock Unit HD VMK M P piece To order per full packaging. GM41 Sliding nut for supporting profile For stepless fixing of the brackets on the ceiling profiles. Optional finish HD Electro zinc-plated HD kg/piece u Stock Unit HD GM41M10 - M P piece To order per full packaging. -451

64 ASSEMBLY AESSORIES RO Giant washer (DI 15-1 A) Optional finish HD Electro zinc-plated HD kg/piece u Stock Unit HD RO8 - M P piece HD RO10 - M P piece HD RO1 - M P piece To order per full packaging. RO Flat giant washer (DI 901) Optional finish HD Electro zinc-plated HD kg/piece u Stock Unit HD RO8 - M P piece HD RO10 - M P piece HD RO1 - M P piece To order per full packaging. -45