SECTION 7 CHANNEL & SUPPORT SYSTEMS
|
|
- Ruth Dorsey
- 6 years ago
- Views:
Transcription
1 SECTION 7 CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is adaptable for use in many other applications. The flanges on Intelok channel are serrated to give improved slip resistance over that of conventional strut systems, particularly when Intelok channel nuts are used. Intelok channels are made in deep, shallow and multiple combination profiles. Standard lengths are either 3 or 6 metres, with other lengths available to order. When used with our extensive range of brackets, an infinite variety of frameworks and structures can be created. Intelok channels conform to BS6946. Unitrunk Intelok Channels are supplied in the following finishes STRAIGHT CHANNEL GM Hot dip galvanized Structural Steel (Steel BS EN and Galvanising BS EN 1461:2009) QQ Pre-Galvanised Structural Steel (Steel BS EN 10326) BRACKETS GA Hot dip galvanized Mild Steel (Steel BS EN / BS EN and Galvanising BS EN 1461:2009) STRAIGHT CHANNEL & BRACKET SS Stainless steel grade (316 marine) to BS EN :2005 ACCREDITED TO THE FOLLOWING STANDARDS LUL ACCREDITATION ID: 1822 The safe loading figures are based on a) The x-x axis b) A simply supported beam c) Pre-galvanised steel - yield 250N/mm2 d) A safety factor of 1.6 against yield
2 Multi Compartment Standard Shallow Channel UC21/3 UC21/6 GAUC21/3 GAUC21/6 21 Lighting Slotted Shallow Channel UC2IS/3 UC21S/6 GAUC21S/3 GAUC21S/6 Deep Channel UC/3 UC/6 GAUC/3 GAUC/ * Including weight of channel. ** Excluding weight of channel. Uniklip Speedway Cable Ladder Cable Basket Systems Channel & Support Floor Cable Tray Slotted Deep Channel UC4IS/3 UCS/6 GAUCS/3 GAUCS/6 Back To Back Shallow Channel UC42/3 UC42/6 GAUC42/3 GAUC42/6 Length (Solid Channel in stock, slotted on request) Bench Outlet & Perimeter Steel Conduit (Class 4) Innovative Design Solutions Accessories & Supports visit online: uk unitrunk.co.uk ireland unitrunk.ie Index
3 Back To Back Deep Channel UC82/3 UC82/6 UC8S/3 UC8S/6 GAUC82/3 GAUC82/6 (Slotted) (Slotted) 82 (Solid Channel in stock, slotted on request) Tray to Channel Klip CHTR 25 (KLMR) CHTR 50 (KLHR) Basket to Channel clip UFCM Square Plate 325AJ03 325AJ05 325AJ07 325AJ10 Size 6mm 8mm 10mm 12mm Two Hole Plate 325AD11 Three Hole Plate 325AC11 Four Hole Plate 325AC13 Five Hole Plate 325AY10 L Bracket 325AG10 Right Angle Bracket 325AS10 T Bracket 325AF13 Right Angle Bracket 325AC Product ing Key (See page 104)
4 Right Angle Bracket Deep U Bracket Right 325AD10 325AJ12 Angle Bracket 325AC10 Multi Compartment Lighting Right Angle Bracket Right Angle Bracket Right Angle 325AE10 325AE11 Shelf Bracket 325AE12 Speedway Cable Ladder Right Angle Bracket Right Angle Bracket Right Angle Bracket 325AQ10 325AQ11 325AQ12 Floor Uniklip Cable Tray Channel & Support Cable Basket Systems Standard Shallow Z Bracket Deep Z Bracket Multiple Z Bracket 325AD28 325AC12 325AU10 Bench Outlet & Perimeter Back to Back Bracket W Shaped Deep Bracket Double Channel Bracket 325AT11 325AU15 325AJ11 Steel Conduit (Class 4) Innovative Design Solutions visit online: uk unitrunk.co.uk ireland unitrunk.ie 107 Accessories & Supports Index
5 Shallow U Bracket Multi-Channel Bracket Single Channel Base Plate 325AJ13 325AJ14 325AR10 Single Channel Base Plate 325AN10 Double Channel Base Plate 325AT10 Two Leg Wing Fitting 325AV10 Three Leg Wing Fitting 325AV09 Wing Fitting with Gussets 325AW01 3 Way Corner Bracket 325AV02 Double Channel Wing Fitting 325AWO2 Channel Support Bracket R/H 325AG16 Channel Support Bracket L/H 325AG15 Channel Support Bracket 325AF10 L/H Channel Support Bracket 325AF11 R/H Channel Support Bracket 325AF12 Product ing Key (See page 104)
6 Multi Compartment 45 Angle Bracket 325AF14 Acute Angle Bracket AH11 Obtuse Angle Bracket AD17 Lighting Other angles to Order Shallow External Connector 325AK11 Shallow Connector Uniklip Cable Tray 336AB07 M10 setscrews supplied separately. Deep Connector 336AB08 Speedway Cable Ladder Deep External Connector 325AK10 Cross Support Bracket 325AB10 325AP11 Channel & Support Cable Basket Systems Floor Standard 325AX10 Including M12x40 Cone point screw For Flange thickness up to 18mm. (Shallow Channel) 325AL11 Including cone point set screw. For Flange thickness up to 15mm. 325AX11 Including M12x40 Cone point screw For Flange thickness up to 17mm. (Deep Channel) 325AL10 Including cone point set screw. (Deep Back to Back Window) 325AL09 Including M10x40 Cone point screw For Flange thickness up to 15mm. 325AP10 Including cone point set screw. For Flange thickness up to 17mm. visit online: uk unitrunk.co.uk ireland unitrunk.ie 109 Bench Outlet & Perimeter Steel Conduit (Class 4) Innovative Design Solutions Accessories & Supports Index
7 (Back to Back Deep Channel) 325AM12 Supplied singly with nuts, bolts and washers. Heavy Duty (Back to Back Deep Channel) 325AM13* 325AM14** *Up to 25mm flange range. **25-40mm flange range. (Deep Channel) 325AM10 25mm flange range. Also suitable for shallow channel up to 25mm. Z Purlin Clip (M10 Hole) 389AH10 Cone Pointed Bolts UCM10/CPB Thread Size M10x40 End Cap (Shallow) 325AA11 325AA13 Black PVC White PVC End Cap (Deep) 325AA10 325AA12 Black PVC White PVC Cover Strip 339AA10 339AB10 Length 3m long 3m long White PVC (Available in black to special order) Pre-Galvanised Single Channel Cantilever Arm Back to Back Cantilever Arm 48mm CARMSCP150GM CARMSCP300GM CARMSCP450GM CARMSCP600GM CARMSCP750GM CARMSCP900GM Product Arm Length 2 Hole 150mm 2 Hole 300mm 2 Hole 450mm 2 Hole 600mm 2 Hole 750mm 2 Hole 900mm 48mm 127 mm CARMBBP150GM CARMBBP300GM CARMBBP450GM CARMBBP600GM CARMBBP750GM CARMBBP900GM Product Arm Length 2 Hole 150mm 2 Hole 300mm 2 Hole 450mm 2 Hole 600mm 2 Hole 750mm 2 Hole 900mm 150 mm Short Spring Channel Nuts UCM6/S UCM8/S UCM10/S UCM12/S Sold in 100 s Thread M6 M8 M10 M12 Long Spring Channel Nuts UCM6/L UCM8/L UCM10/L UCM12/L Sold in 100 s Thread M6 M8 M10 M12 Channel Nuts Less Spring UCM6/N UCM8/N UCM10/N UCM12/N Sold in 100 s Thread M6 M8 M10 M Product ing Key (See page 104)
Wanco Electric & Machinery Pte Ltd. Cable Management Systems. Cable Trunking
Wanco Electric & Machinery Pte Ltd Cable Management Systems Cable Trunking About Wanco Wanco Electric and Machinery Pte Ltd is the leader in electrical construction materials. Through continued support
More informationINSTALLATION. For more information on this product or to order samples call or visit our website at builddirect.com.
Page 1 Page 2 Page 3 Page 4 Page 5 1. Door Assembly: Step A: Attach part #34 to part #35 with screws #65/67. Step B & C: Attach part# 34.35(36) to part #33 with two #70 screws. Step D: Insert door bottom
More informationSwifts cable ladder supports
heavy duty cantilever arms Heavy duty cantilever arms enable horizontal runs of cable ladder to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel. They are suitable for
More informationConcealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
More informationTel: +44 (0)
4 Lindapter s support fixing range offers a series of ideal solutions for all building services. This includes the suspension of HVAC equipment, pipe work, fire protection/sprinkler systems, suspended
More information4Post Trakslider Instructions
4Post Trakslider Instructions FOR ASSEMBLY ASSISTANCE CONTACT CUSTOMER SERVICE AT 1-866-217-0330 (MONDAY THRU FRIDAY 8 AM - 5 PM EST) PAGE 1 OF 31 INST0083 REV2 WS 4/16/08 Tools Required for Assembly Or
More informationSuperstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
More informationSimotec. 13.i
Products: Framo 80 13.0 Products: Framo 80 13.1 Products: Structural Elements 100/120 13.2 Products: Pipe Shoes 13.3 Framo 80: Beam Section and Screw 13.4 Framo 80: Cantilever Bracket and End Support STA
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationINSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls
INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls James C. White Company, Inc. Greenville, SC PAGE 5 Standard Instrument Stands SINGLE WALL STAND
More informationSection Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
More informationCABLE TRUNKING & ACCESSORIES
CABLE TRUNKING & ACCESSORIES STRAIGHT CABLE TRUNKING SELF TAPPING SCREW CONNECTOR H W MATERIAL & FINISHING 1 Galvanised Iron to BS2989 : 1982 & Original Finishing 2 Hot Roll Steel to JISG 3131 SPHC & HDG
More informationCABLE TRAYS & STRUTS CATALOUGE
CABLE TRAYS & STRUTS CATALOUGE We are the Manufacturer for Copper Bonded Ground Rod and Contract Manufacturing Company for other products made from Brass, Copper, Gunmetal, Bronze, Cast Iron, Malleable
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationSIGN MOUNTED BEACON SIG-027-A SINGLE SIGN MOUNTED FLASHING BEACON INSTALLED ON ONE WOOD POST DETAIL "A-1"
1 1/2" x 60" Galvanized (thread both ends) Top Bolt See Detail "A-1" and Slotted Channel Parallel Conduit Clamp Warning Sign 3 Equal Bolt Spacings (3 places at 12" min. spacing) (1) 3/8"x 7" min. (4"x
More informationA E D X E X C A C B A L B E L E T R T A R Y
ADE CABE TAY Adex Cable Tray Metallic Adex cable trays are manufactured for the smooth and easy pulling of cable from one point to another to BS EN 61537:2002. e have designed the best cable trays, by
More informationCABLE TRAY SYSTEM 136
CABLE TRAY SYSTEM 136 137 WIRE MESH TRAY SYSTEM 138 139 WIRE MESH TRAY SYSTEM 140 141 WIRE MESH TRAY SYSTEM Wire Mesh Tray width B thickness (t) mm/inch mm/inch mm/inch V GR 35.100 35/1,4 100/3,9 3,5 V
More informationHex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
More informationUNIVERSAL BASES. #60UB - Universal Mounting Base. Same as above for 1/2 inside threads.
UNIVERSAL BASES #60U - Universal Mounting Base. This base can be used for vertical or horizontal mounting. Base is threaded for 3/8 inside threads. Made of bronze material for pastedown or fastening with
More information8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
More informationBIS RapidStrut I 1. Title. Saves up to 40% fixing time. BIS RapidStrut. Medium Rail System. walraven.com
Title BIS RapidStrut I 1 Saves up to 40% fixing time BIS RapidStrut Medium Rail System Title BIS RapidStrut For all medium rail applications Extensive system Fast and easy fixing BIS RapidStrut I 3 BIS
More informationUSE STRAIGHT ALLEN WRENCH (Bz) WITH AN ELECTRIC SCREWDRIVER TO TIGHTEN SCREWS - NOTE: DO NOT OVER TIGHTEN
ASSEMBLY INSTRUCTIONS (VK) MODEL NO. 836-944P1 Made in Vietnam Thank you for purchasing this Powell product. We want to make sure it is complete and to your satisfaction. Please check all packing material
More informationBF12-SERIES Flash Stands
BF12-SERIES Flash Stands Document # 16-462 Assembly and Operating Instructions Please review all these instructions prior to assembly. The BF12-SERIES stands come in two models, standard duty and heavy
More informationTemplate. Blue 242. May 2018 trademarks of Suncor Stainless, Inc. Loctite is a registered trademark of Henkel Corporation
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com
More informationHeavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.
Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy
More informationEZYMESH CABLE MESH EZYMESH. Cable Support Systems
EZYMESH CABLE MESH EZYMESH 50 500 00 150 PRODUCT DETAILS EzyStrut EzyMesh provides premium performance in commercial and light industrial applications. Strong, versatile and easy to install EzyMesh is
More informationRoof-Top Applications
Roof-Top Non-Penetrating Flat Roof Mounts Pre galvanized mast, base and Rubber Mat Designed for DSS support 103489 103490 103491 103492 103493 FRM Non-Penetrating Roof Mount (1.25" O.D. Tubing, 60" Overall
More informationSafety Glasses Work Gloves Chop Saw with Cutting Disk. Half Round File Pencil Marker
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com
More informationCable Management System Supports & Structures
Cable Management System Cable Management System Supports & Structures (*) he hot dip galvanized finish is O A ACCURA ASHIC FIISH. It is a very effective corrosion protection. COLOUR IFFRCS CA OCCUR (shades
More informationTape Measure Carpenter s Square Touch-up Paint Chalk Line. Blue 242. Template
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Rd. Plymouth, MA 02360 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com NOVA System Installation Instructions The
More informationmk Profile Technology
mk Profile Technology One Construction Kit, Many Options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion better products, better solutions One basic technology, four
More informationInternational Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
More informationPinnacle Technical. Bench and Shelf Trunking. cable management perimeter and distribution. Features.
604 Pinnacle Technical cable management perimeter and distribution www.mkelectric.co.uk Bench and Shelf Trunking Features l Available in a single or double configuration l May be fitted either direct to
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationBIS UltraProtect 1000 I 1. Support system. BIS UltraProtect For indoor and outdoor use. walraven.com
BIS UltraProtect 1000 I 1 Support system BIS UltraProtect 1000 For indoor and outdoor use BIS UltraProtect 1000 Support system For indoor and outdoor use Optimal protection Better than hot dip galvanizing
More informationInstallation Systems INSTALLATION SYSTEMS
INSTALLATION SYSTEMS 230 MM Channel System MM Channel System Page 230-237 MQ Channel System MQ Channel System Page 237-248 MC Channel System MC Channel System Page 249 Accessories Beam Clamp MAB Page 249
More informationNINIGRET MARINE INC.
NINIGRET MARINE INC. everything you need to make docks Suppliers of Dock Hardware Marine Construction Hardware Specialty Hardware Permafloats 3964 South County Trail (Route 2) Charlestown, RI 02813 Telephone
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 00 Series End Drive Conveyors Table of Contents Warnings General Safety........................... Introduction....................................... Product Description.................................
More informationRisk Assessment & Safe Working Practice
RA Ref Number: 36 Revision: 3 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: Installing Trunking Next Review Date: 01/04/2019 Notes: Please refer to Safe Working
More informationCABLE SUPPORT MANAGEMENT SYSTEM
CABLE SUPPORT MANAGEMENT SYSTEM Contents Introduction Instruction for Product CTS CABLE TRUNKING SYSTEM Singapore Standards Cable Trunking SS 249 : 1981 Class 1 1 Epoxy Steel Cable Trunking for Indoor
More informationFranklin Mills Stackable Movable Lateral Instructions
Franklin Mills Stackable Movable Lateral Instructions Table of Contents: Table of contents...1 Tools Required...2 Stationary Shelving Assembly...3-7 Mobile Shelving Assembly...8-16 Rail Assembly...8-11
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 00 Series End Drive Conveyors Table of Contents Warnings General Safety........................... Introduction....................................... Product Description.................................
More informationLight Structural Main Runner Light Structural Infill Tees. Straight Connector. Strut Structural Tee thread
Internal Splice Support Connector 85.6 Straight Connector 4.3 22.3 5.30 22.3 70.6 *Note: All Dimensions are in Millimeters U-Shape Connector, Hex Bolts, & Channel Nuts L-Angle Connector 9.7 3 8-6 for Light
More informationBollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings. Lockinex. ea i, ea u i
Bollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings Lockinex ea i, ea u i INTRODUCTION Protecting Building Curtilage, Assets & Personnel the Lockinex range of Bollards & Guards are
More informationMONEX40 EXTRUDED ALUMINIUM ASSEMBLY SYSTEM. MONK Conveyors Limited Unit 9 The Christy Estate Ivy Road Aldershot Hampshire GU12 4TX
MONEX EXTRUDED ALUMINIUM ASSEMBLY SYSTEM Conveyors Limited Unit 9 The Christy Estate Ivy Road Aldershot Hampshire GU12 4TX Tel:01252 369800 Fax:01252 369801 Email: sales@monk-conveyors.co.uk Made in England
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wall Mount A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Floor Mount Wire Mesh Cable Tray System for Channeling of Cable Wiring Features
More informationCat. No. A1200 A1200-S A1200-KO. Finishes & Materials. E142-1/4x100EG 1/4 x 1 A100-5/16EGC A100-3/8EGC. Standard Finish: Electrogalvanized
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationTimber to Timber - Timber to Concrete - Timber to Steel
01/2017 TIMBER CONNECTORS NOT TO BE USED IN EXTERIOR SITUATIONS Stainless Steel alternatives are available where stated Timber to Timber - Timber to Concrete - Timber to Steel MiTek manufactures and markets
More informationOXYGEN INSTALLATION. Revision date
12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex
More informationSLIDING GATES BRUNDLE
SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour
More informationDepending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12
XL Quilting Frame 1 Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12 Foot frame Printed 2 June 2014 Updated
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationDobyGrip Accessories. Wire with Loop. Wire with Closed M6 & *M8 Eye Bolt. Wire with Carabina
Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional methods of suspension. All wires are supplied including the DobyGrip
More informationInstallation Systems. Hilti. Outperform. Outlast.
Systems Hilti. Outperform. Outlast. 446 Systems MM Channel System (galvanized) MM channels MM connectors 454-457 458-465 MQ Channel System (galvanized) MQ channels 466-469 MQ Connectors 470-480 MQ brackets
More informationIPS ID 92*14* Series. 40 Series. 28 Series. 30 Series. 40 Series. Catalog 1816 Introduction, En México llame. . Nextel.
Catalog 86 Introduction, En México llame. Nextel. 498 0846 ID 92*4*72847... I 20 Series 2-20 p34 40 Series 2-020 p34 2-24 p34 2-040 p34z 2-26 p34 2-08 p34 2-2 p34 0-04 p3 0-042 p3 0-083 p20 28 Series 2-028
More informationMidwest Roadside Safety Facility
2 Spaces @ 75" [05]= 150" 3810 4 Spaces @ 3 Spaces @ 4 Spaces @ 18.75" 37.5" [953]= 37.5" [953]= [476] 112 1/2" 150" = 75" 2857 3810 [05] 18 476 7 Spaces @ 75" [05]=525" [13335] 21 20 18 17 1615 14 1312
More informationCable Tray. SF/273, 16th mile stone, Kavaraipettai-Satyavedu road, Thiruvallur T /52/53/54 F
Cable Tray Cable Tray Balsara is pioneer in manufacturing perforated and ladder - type Cable Trays along with accessories. Cable Trays are available in different sizes as per standard requirement of customer
More informationSteel Cable Management SECURITY AREAS TOTAL PROJECT SOLUTIONS
Steel Cable Management SECURITY AREAS TOTAL PROJECT SOLUTIONS Introduction to Tamlex Total project solution products for the complete cable management solution; Industrial, Warehouse, Retail and Offices
More informationSteel Casework Metal Framing System
MISCELLANEOUS ITEMS Continuous Slot Metal Framing System Installs quickly Completely adjustable Re-usable Eliminates all welding, drilling and use of special tools G23 METAL FRAMING SYSTEM 1. Place the
More information** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at:
3/01/2007 VISIT THE LITIME WEB SITE: WWW.LITIME.COM ** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at: 1 (800) 225-3865 Double Shed Doors for Back
More informationWALL TO FABRICATED FLOOR
WALL TO FABRICATED FLOOR PERIMETER WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN PARTITION WALL IS HELD IN PLACE BY WOODEN STRIP SCREED OPTIONAL NSF COVED FLOOR IS SHOWN
More informationSection J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10
Section J-2: Glides and Levelers Section J-2: Last Updated: 07/02/10 Maverick Hardware Section J-2: Light Duty Glides Adjustable Suggested applications: residential, RTA furniture, and store fixtures.
More informationInscription Area/Color Labeling Accessories W H Order No. Price Packing Illustration Description mm mm 1 Pkg. 1 Pkg.
Type 8WA1 / 8WA2 Labeling Accessories Inscription Area/Color Labeling Accessories W H Order No. Price Packing Illustration Description mm mm 1 Pkg. 1 Pkg. $ Frames/Plates Labeling plates for terminal blocks,
More informationSTRAIGHT HANDLEBAR KIT
STRAIGHT HANDLEBAR KIT P/N 2881973 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are
More informationPRODUCT GUIDE K2. THE COMPLETE CONSERVATORY COMPANY
K2. THE COMPLETE CONSERVATORY COMPANY CONTENTS PAGE NO. 02 System Specification 03 Product Identification 03 Quality Standards 04 Glazing Bars 06 Valley and Ridges 08 Wallplates 09 Eaves Beams 10 PVC Trims
More informationHopper and Drive Components
January, 07 Lit. No. 7586, Rev. 00 Hopper and Drive Components Model SP-00- & SP-5- Low-Profile Tailgate Spreader Parts List This manual is for SnowEx SP-00- & SP-5- tailgate spreaders with serial numbers
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationThe fast track. in cable management systems for power, voice and data cables. Reduce installation time up to 50%
The fast track in cable management systems for power, voice and data cables Reduce installation time up to 50% Save TIME QuikLok tray connections at record speed In any project, installation time is key.
More informationInteractive Monitor Arm
Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods
More informationSTRUCTURAL BRACKETS CATALOGUE
08/2011 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationPiper GI Conduits. Heavy Gauge Welded GI Conduit, threaded
Piper GI Conduits Piper GI Conduits from Eurotube is a range of Conduits manufactured from high grade galvanized steel. The products are available in class 4 hot dipped galvanized, black enameled and class
More informationHANDLEBAR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS TOOLS REQUIRED. Instr Rev Page 1 of 6
HANDLEBAR KIT P/N 2881993 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted
More informationUPM 6X. UPM 6X Standard stock Tee socket sized for 5" schedule 40 or 80 Pipe. Page 1 of 8
Page 1 of 8 UPM 6X A. TEE SOCKET: 6 O.D. PIPE SOCKET TO FIT OVER 5 SCHEDULE 40 OR 80 STEEL PIPE B. CROSS PIECE: 2 X 2 X 1/8, LENGTH DEPENDENT ON MODULE USED, SQ. TUBE 2 PLACES C. LONGITUDINAL: 2 X 2 X
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationFURNITURE LABORATORY METAL FRAMING SYSTEM. For additional information and help in planning contact Mott Manufacturing.
LABORATORY Continuous Slot Metal Framing System For additional information and help in planning contact Mott Manufacturing. G22 Connection Instructions Installs quickly Completely adjustable Re-usable
More informationPRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
More informationSPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l
SPEEDFRAME T h e s p e e d y w a y t o b e i n d i v i d u a l T h e a l l p u r p o s e c o n s t r u c t i o n k i t SPEEDFRAME All materials are kept close to hand in this specially designed Speedframe
More informationSwifts cable ladder couplers and fasteners
straight length to straight length couplers ouplers are used for joining together straight lengths in the medium duty (Topaz), heavy duty (Sapphire) and extra heavy duty (Emerald) ranges Fittings in these
More informationRoof Mount Ground Mount Specialised Clamps Spares Application Notes
DPA Solar Racking Solutions Solar PV Racking Catalogue Roof Mount Ground Mount Specialised Clamps Spares Application Notes www.dpasolar.com.au 1300 447 500 Rails & Splices Page 3 Mid & End Clamps Page
More informationM2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4
M2 Assembly Table of Contents M2 Sub-Assemblies... 3 630mm Belt Sub-Assembly... 3 702mm Belt Sub-Assembly... 3 Spider Sub-Assembly... 4 Idler Bolt Sub-Assembly... 8 Y Motor Sub-Assembly... 9 X Motor Sub-Assembly...
More informationManufacturing and installation instruction. Solidare Verso. Pergola awning (bottom mounted)
Manufacturing and installation instruction Solidare Verso Pergola awning (bottom mounted) Solidare Verso pergola awning 11-05-2017 * * A T T E N T I O N * * AVZ accepts no liability for any errors in this
More informationF I X I N G B R O C H U R E
F I X I N G B R O C H U R E Joist Hangers Joist Hangers on Steel Beams Fixing Masonry Hangers Speedy Joist Hangers Lateral Restraint Straps Roof Tie Down Straps Herring Bone Joist Strut Bat 'U' Nail Plate
More informationNotes. Modifications and constructional corrections arising particularly from technological development excepted.
Notes Our service staff and application en gineers will be pleased to offer you their assistance to answer your questions or to work out in cooperation with you specific solutions with the aid of our own
More informationPrecision Engineering & Reliability WIRE ROPE SUSPENSION SYSTEM
Precision Engineering & Reliability WIRE ROPE SUSPENSION SYSTEM DobyGrip Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional
More informationInstructions and Parts List DR-12N Martin House
Form 36-99 Instructions and Parts List DR-N Martin House Note: It is necessary to install a post before house is put up, but the house can be assembled at any time. House parts Check parts against this
More informationSTRUCTURAL BRACKETS CATALOGUE
0/2 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to cut
More informationLab Style Table Frame Part No Assembly Guide Automation Technology
Ergonomic Workstations Lab Style Table Frame Part No. 8 0 Assembly Guide 7 90 70 Automation Technology SPECIFICATIONS Lab style frame part number... 80 Height... 70 mm (8.") Width... 90 mm (.7") Depth...
More informationPROFILE Flat Panel Console System Installation Manual
PROFILE Flat Panel Console System Installation Manual Table of Contents Page Introduction... 2 Important Safety Information...3, 4 Installation Overview... 4, 5, 6 Single Sided/Single Unit... 7 Double
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationAir-supply elements. 5-2 MGE 13.1 Air-supply elements. 45x90. 45x90 (p. 2 41) Rexroth strut profiles can be used as compressed-air
5-2 MGE 13.1 Air-supply elements (p. 2 41) Air-supply elements Rexroth strut profiles can be used as compressed-air 19584 L L 2N L 3NVS (p. 2 40) 009732 L 7,9 cm 2 leads and reservoirs. The hollow chambers
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an
More informationAir-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
More information