The natural choice for X-Guard
|
|
- Oswin Perkins
- 5 years ago
- Views:
Transcription
1 The natural choice for X-Guard 1
2 Possibilities with X-Tray for X-Guard The three most common mountings: u Key hole mounting For quick mounting, using the key holes in the post. Q V AE AD D C E T A Y R G v Top mounting Quick and discrete mounting that follows the upper end of X-Guard. w racket mounting With this mounting you get the most possibilities. v w K A u L AC M A N Shown here are the different mounting possibilities. The letters will guide you through our different products and assembly instructions. All wire trays and fittings are zinc plated in black to match the X-Guard black panels. Information For mountings with X-Tray on X-Guard the following applies: Maximum load capacity is 30kg/m Maximum width of the brackets: 420 mm For more information about X-Tray please visit For more information about X-Guard please visit 2 3
3 Items X-Tray for X-Guard lack Items X-Tray for X-Guard lack AA, A, AC, AG + X-Tray 60x60300 Item No X-Tray 120x60300 Item No X-Tray 220x60300 Item No X-Tray 320x60300 Item No X-Tray 420x60300 Item No A,, D X-Tray G Item No X, Z U, A, AE, AF, AG, AA, AD R Fitting Item No. X2 Fitting Item No Angled Fitting Item No. X4 Fitting Item No Used with Angled Fitting or to mount the wire trays with another item, as for example an 4 Pendant or 5 racket. When assembling a corner (T) or an reduction (V) Fittings also are used. When forming the wire tray, the X2 Fitting are used for radius (Z) or when doing a vertical decline from a horizontal wire tray (X). For T-crossings (A) or connections to the wall or floor (AG). To adjust the angle some degrees (U). Can also be used mount vertical wire trays onto horizontal wire trays (AE) (AF). When mounting wire trays at the top of the post the X4 Fitting can be used together with the Fitting to raise the wire tray above the hinge door (AA). Used to mount a vertical wire tray underneath a horizontal wire tray (AD). X5 Joining Fitting Item No pcs, incl. bolt and nut. For joining the wire trays. racket mounted on the outside and bolt from the inside. C, H X-Tray Mini Item No Post racket Item No Corner racket Item No Post racket Top Item No X-Tray Mini Item No Mounted in the key holes on the post (A). Used together with the Corner racket ( ) for inside corners () and together with Top Corner racket ( ) for inside corners at the top of the post (D). Used in corners together with the Post racket ( ) (). Can also be used elsewhere on the post, also the 5 racket can be mounted onto it. To be mounted at the top of the post (C). For wire trays in sizes of mm. If the upper part is straightened out 90 it can be mounted anywhere on the post (H). Incl. screw and plug. MORION kabelbrygga, stor Problemfri överkö slangar. Hög bärfö speciella hårdgum AC olt M87 Item No. 40 pcs Flange Nut M8 Item No. 40 pcs 0 racket Item No Mini racket Item No Pendant Item No Pendant Item No To mount wire trays on the 1 racket or onto a wall, machine or similar. Used for the 120 mm wide wire trays or for mm wide wire trays mounted with the side upwards. To mount wire trays on the 4 Pendant or onto a wall, machine or similar. Used for the 60 mm wide wire trays. To mount wire trays together with 0 or 5. Used together with 0 Mini racket or to connect the wire trays to the floor (AC). Extra signaleffekt t locket av högvärdi Top Corner racket Item No E racket Holder Item No Used together with Post racket ( ) for mounting in the corner at the top of the post (D). Incl. screw and plug. Used together with 5 racket for mounting on top of the post 50x50 (E). F racket Holder 70x70 Item No racket Item No. Used together with 5 racket for mounting on top of the post 70x70 (F). Comes in 4 different lengths 120, 220, 320 & 420 mm. Can be mounted on Corner racket (), racket Holder 50x50 (E), racket Holder Aluminium (G) and 70x70 (F), Adjustable Post Fitting (I), Adjustable Corner Post Fitting (J) and Post racket Holder (K). Normalelement I, E, F, G, I, J, K Adjustable Post Fitting Item No Vinkelelement vänster Optional placement on the post for mounting the 5 racket (I). Incl. bolts and nuts. Dimensioner (mm) LxxH Referen svart/ gul 960 x 600 x svart/ gul 500/200 x 600 x 75 For equipotential bonding. X63 Accessories Holder Item No For mounting of a junction box, sockets or other accessories. X80 Side Accessories Holder Item No X65 Cover Item No Width L Q P X68 Equipotential onding Screw Item No Vinkelelement höger Tillval: Vinkelelem hörn- och kurvzon Färg Utförande D 3 kabelrännor: 2 kanaler 1 kanal Ändelement med spår Self Tapping Screw Item No. Ändelement svart 283 x 600 x med tapp Length mm. Available in widths 60, 120, 220, 320 MORION kabelbrygga, liten and 420 mm. The cover shield the cables from for example welding sparks and falling objects. Problemfri överkö slangar med diam Utförande J 4 G K M N Adjustable Corner Post Fitting Item No racket Holder Aluminum Rail Item No Post racket Holder Item No Mesh Panel Mini racket Item No Mesh Panel racket Item No Optional placement on the corner post for mounting the 5 racket (J). Incl. bolts and nuts. Mount the 5 racket onto the aluminium rail above sliding doors (G). Fits together with wire trays mounted with 5 racket on top of the posts with racket Holder. Incl. bolt and nuts. Mount the 5 racket at the post, using the key holes (K). For mounting onto the mesh panel (M). For mounting onto the mesh panel in line with wire trays mounted with Post racket ( ) (N). För kablar upp t Ø 45 mm Knurled Locking Plug Item No X72 Safety Cap Item No diameter 100 pcs. To attach Post racket Top ( ) and Top Corner For wires in diameter 4, 5 and 6 mm, comes in bags racket ( ) at the of 100 pieces. top of the post. Ø 4... X-Tray Width 60 Ø 5... X-Tray Width 120, 220, 320 Ø X-Tray Width 420 X75 olt Cutter Item No X76 13 mm Spanner Item No Morion cabel bridge, small Item No (yellow) (black) Psst.. You can also order a demokit with X-Tray samples, brackets and fittings for X-Guard (Art. nr. 9307) 5
4 Mounting instructions Key hole mounting racket mounting For post 50x50 AX- AX-11 A 5 5 AX-11 AX- A A AX A 5 5 AX For post 70x70 E F A AX AX-11 AX A A Top mounting C D 5 G Other mountings 5 5 I H AX-15 AX-12 AX-12 A AX-11 A A AX-12 AX-15 AX A AX AX AX-11 AX-12 A A A A AX A 5 5 x6 5? x6? 5 5 x ?
5 Mounting instructions Other mountings Other mountings XX J L x K M XX N x xa A O Accessories P AX Q 3 x AX 3 XXXX x A XXXX XX XX Width 9
6 Mounting instructions Joining / forming the wire trays Joining / forming the wire trays 2 x 2 x X5 2 x X X5 R S X4X4 X4 X x T X4 X AA A AC Alternativ Alternativ Alternativ U X5 V X X X2 X AD AE AF X2 X X72 X2 Y X5 X5 Z 10 x AG x 11
7 How safe do you want to be? Axelent A offers a complete safety concept for machinery, construction and storage. The Axelent head office is in Hillerstorp, Sweden, where all product development, production, storage and packaging takes place. Axelent has sales offices in 50 countries and the products are sold worldwide. The company also includes Axelent Wire Tray, who offer a complete cable routing system based on wire trays under the brand name of X-Tray. The Axelent Group is made up of the three companies Axelent, Axelent Engineering (automation solutions) and Axelent Software. These companies have the joint mission of making Swedish industry competitive through automation, safety, rational procedures, functions and expertise. AXELENT AXELENT ENGINEERING AXELENT SOFTWARE AXELENT A P.O. OX 1 KÄVSJÖVÄGEN 17 SE HILLERSTORP, SWEDEN +46 (0) SALES@AXELENT.COM G1704_1.1 12
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationDefem Mesh Trays. Catalogue 2016 Mesh Tray system for demanding applications
Defem Mesh Trays Catalogue 2016 Mesh Tray system for demanding applications Defem Mesh Trays Every construction needs a strong backbone Defem high-end mesh trays are part of our integrated, complete cable
More informationBEST PRACTICE GUIDE. Socket Bases. Working with Concrete Slabs
Working with Concrete Slabs When working with concrete slabs the barrier protection can be erected in three ways - with socket bases, adjustable slab edge brackets and multi slab clamps. Socket Bases 1
More informationmk Profile Technology
mk Profile Technology One Construction Kit, Many Options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion better products, better solutions One basic technology, four
More information3. Barrier elements. Barrier posts. Stainles steel
3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240
More informationAnswer Power Beam and Boundary Screen
Answer Power Beam and Boundary Screen 5/16 MAGNETIC 3/8 If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by
More informationFortress Vertical Cable Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS
Fortress Vertical Cable Overview 2 5 4 1 Use the steps below for the following pages to complete your rail system 6 Rails Include 1 Cable Support 8 Rails Include 2 Cable Supports 3 160 Fortress Vertical
More informationVPN: ISBXLR. Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
VPN: ISBXLR Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM649-R2 RM657 RM664 RM861 RM650 RM658-R2 RM665-R2
More informationGeneral Prisoner Transport Install Instructions PT-2-INST
General Prisoner Transport Install Instructions PT-2-INST 50 or 60 high x 80, 100 & 120 inch long / Double Compartment Inserts Also refer to PT-A-3XX instructions for vehicle specific mounting measurements
More informationBunk Pod Front Entry Assembly Instructions
Bunk Pod Front Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod This step by step guide will show how to assemble your pod(s) on site. It
More informationSM-RAZOR-ART2-L / SM-RAZOR-ART2-XL
SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL Strong Razor Series Articulating Mount for Large and Extra Large Displays INSTRUCTION MANUAL Installation Manual Warnings: Installation of this product should be done
More informationCable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationIn a class of its own:
www.gsmotion.com In a class of its own: Easy To Design Easy To Install Take the safe route. The incredibly solid and wear resistant safety fence system guarantees the highest level of quality, longevity,
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationCABLE TRAY SYSTEM 248
CALE TRAY SYSTEM 248 249 CALE LADDER SYSTEM 250 251 CALE LADDER SYSTEM 252 253 CALE LADDER SYSTEM Cable Ladder distance between rungs: 300 mm thickness (t) delivery length m S KL 60.203 60/2,3 200/7,8
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More information12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS
adlonco@hotmail.com 1218 12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is recommended. Base Dimensions 12 ½ x18 11, Largest Dimensions 13 6 x20 ½ (see pg.1) ZZZ-18.1218.0530-1.GP.EN.HER.doc
More informationTABLE OF CONTENTS. Impregnated... 1 NORDIC FENCE Fynbo FSC Certified... 1
TABLE OF CONTENTS Impregnated... NORDIC FENCE Fynbo FSC Certified... Iron... NORDIC FENCE Lightweight model, GENERAL... NORDIC FENCE Lightweight model, with a grid filled... NORDIC FENCE Lightweight model,
More informationSPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
More information300 Series Racks. 19" Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails. Applications. Features. In The Box. Options
300 Series Racks 19" Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails Applications The 300 Series is ideal to house electronic equipment for any type of application, both commercial and residential,
More informationWindload Post 9100/9600/9900 Installation Instructions
Windload Post 9100/9600/9900 Installation Instructions Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com Wayne-Dalton Corp. P.O. Box 67 Mt. Hope,
More informationHover. Installation Instructions. Raised Panel. Version
Installation Instructions Version 8-2-17 Raised Panel Table of Contents Page Raised Panel Trough 3-13 Platform Trough 14-20 Platform 120 Degree Trough 21-24 Electrical 25-28 Type A Electric Bases 29-31
More informationGeneral Mounting/Installation manual 2019
General Mounting/Installation manual 209 Important, before you start! Read this manual thoroughly! Think about this before you start to mount. Note that this is a general mounting instruction! Pre-assemble
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationABM International, Inc. Navigator Assembly Manual
ABM International, Inc. 1 1.0: Parts List Tablet (Qty. 1) Tablet mount (Qty. 1) NOTE: Mount may appear and operate different then image below Control Box (Qty. 1) Motor Power Supply (Qty. 1) 2 X-axis motor
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More information12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS
1218 12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is recommended. Base Dimensions 12 ½ x18 11, Largest Dimensions 13 6 x20 ½ (see pg.1) L:\WP51\Instructions\SOLARIUMS INSTRUCTION
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More information4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
More informationCOPPER / FIBER MANAGER RACK INSTALLATION INSTRUCTIONS PX Standard Release A March 2008
COPPER / FIBER MANAGER RACK INSTALLATION INSTRUCTIONS PX101425 Standard Release A March 2008 A UPON RECEIPT OF YOUR Copper / Fiber Manager Rack Great care has been taken to insure that your Copper / Fiber
More informationENG. Tradition. Ambition. Vision. Find out more about the future at randek.com TABLE BS20
ENG 1509 Tradition. Ambition. Vision. Find out more about the future at randek.com BUTTERFLY TABLE BS20 2 FLEXIBLE AND EFFICIENT SYSTEM FOR PREFABRICATED HOUSE MANUFACTURING RANDEK BUTTERFLY TABLE BS20
More informationOhbot. Eyes turn. servo. Eyelids open. servo. Head tilt. servo Eyes tilt. servo. Mouth open servo. Head turn servo
Making Instructions Ohbot Ohbot has six servo motors. The servos allow each part of the face to be positioned precisely. Eyelids open servo Eyes tilt servo Eyes turn servo Head tilt servo Mouth open servo
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationOpen Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationFortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS
Fortress Railing Overview 4 3 1 Fe 26 Iron Railing Systems Fortress Use the steps below for the following pages to complete your rail Vertical Cable and Glass Options Available Fortress Iron Railing System
More informationM4 Foot Operated Underpinner Instruction Manual
M4 Foot Operated Underpinner Instruction Manual M4 Walker Rd, Bardon Hill, Coalville, Leicestershire LE67 1TU, England Tel. +44 (0)130 1692, Fax +44 (0)130 16929 e mail sales@framerscorner.co.uk M4 Underpinner
More information6000#, 4000# Wall-Mounted Type (Horizontal Shaft)
1/6 Wall-mounted CYCLO DRIVE are grouped into right wall type and left wall-mounting type as seen from the output shaft side. Top Bottom Left Wall-Mounted Type Right Wall-Mounted Type 1. Right-Wall Mounted
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationEasy Step by Step Manual
Easy Step by Step Manual Teletower Mini XL Wall-Floor installation The tower packages #1-#2-#3 Open Base Package #1 for the main tower parts. Here you see the three tower tubes (H-Head, M-Middle, F-Feed)
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm
More informationAluminum Frame Type Instruction Manual
Aluminum Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand
More informationAssembly and installation help
Assembly and installation help A supplement to the directions The Purpose of this tutorial is to expand (not replace) upon the directions that come with the system and to help provide shortcuts, the first
More informationEDGE Evolution Outline
EDGE Evolution Outline INSTALLATION INSTRUCTIONS Outline Installation....2-5 Outline End Filler Installation...6-9 Outline Outside Corner Installation...10-13 Outline Inside Corner Installation...14-19
More informationOXYGEN INSTALLATION. Revision date
12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex
More informationRange height adjustable assembly
Table of contents Digital handset operation 3 Height adjustable bench kit 4-5 Cable carrier 6 Ganging tray and ganging rail 7 Height adjustable return frame kit 8 Cable entry pole 9 24 and 30 d worksurfaces
More informationMenu Board Tilt or Fixed Mount Installation Instructions MDS1T-200, MDS1T-300, MDS1T-400 MDS2T-200, MDS2T-300, MDS2T-400 MDS3T-200, MDS3T-300, MDS3T-400 MDS4T-200, MDS4T-300, MDS4T-400 MDS5T-200, MDS5T-300,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationAssembly instructions
Commission: Order no.: Rondo Pavilion PR Ø3.9 Technical changes reserved Assembly instructions As at: 05.011 Sliding door Dear Garden lover, we congratulate you on the purchase of a quality product from
More informationHatch Whiteboard: Portable Stand Installation Instructions
Hatch Whiteboard: Portable Stand Installation Instructions Remove Projector Wall Plate 1. Open the wall mount for the projector. 2. Remove the shipping screw from the front center of the mount arm. 1 P
More information1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 FOR INSTALLATION ASSISTANCE, CALL SARGENT AT 1-800-727-5477 www.sargentlock.com
More informationMounting a BalanceBox 400 to a brick wall
Unpack the BalanceBox 400 and remove the Wall frame cover and its bag of screws. Slide the cover out at the top. NOTE: the cover is NOT included with the BalanceBox 400H LOCK SCREW HOLE MOBILE STAND MOUNTING
More informationTITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
More informationINSTALLATION INSTRUCTIONS K9-C20-32 & K9-C CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL
INSTALLATION INSTRUCTIONS K9-C20-32 & K9-C21-32 2007-2014 CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL TOOLS REQUIRED: Power drill Drill bit set Standard & metric socket sets Phillips screwdriver
More informationINSTALLATION. For more information on this product or to order samples call or visit our website at builddirect.com.
Page 1 Page 2 Page 3 Page 4 Page 5 1. Door Assembly: Step A: Attach part #34 to part #35 with screws #65/67. Step B & C: Attach part# 34.35(36) to part #33 with two #70 screws. Step D: Insert door bottom
More informationLOWLINE SINGLE FOLD DOWN WALL BEDS
ASSEMBLY INSTRUCTIONS LOWLINE SINGLE FOLD DOWN WALL BEDS Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer Drill for Masonry) 6.5mm
More informationDragon A400 Assembly Manual
1 Dragon A400 Assembly Manual Crate Size: 120 L x 65 W x 80 H Machine Size (After Assembly): 372 L x 30 W x 72 H The Dragon A400 will arrive in its crate and will need to be opened with a minimum of two
More informationInstallation Instructions
Contents Page General Information and Installer Tips.......... 2 Panels & Posts............................. 3 Enclosure Description..................... 4 Hinge Door Hardware................... 4-5 Step-by-Step
More informationList of Contents. Trunking systems. Selection of surface finish. Equipotential bonding. Cable ladders. Cable trays/ luminaire rails.
List of Contents Trunking systems Ductel Twist Trunking system for electricity, telecoms and data solutions. The trunking is made of aluminium and is available with 45 mm and 80 mm openings. Plastic trunking
More informationset of safety brace steel cable draw-up gate kpl
0324101 7108020 8208100 Order-nr. Description Number 0324101 safety brace steel cable draw-up gate 2 7108020 hexagon-head tap bolt M8x20 galv. 2 8208100 hexagon nut M8 galv. 2 set of safety brace steel
More informationORTOP Modular Robot v3.0 Arm Assembly
Base Plate Assembly Parts Needed: Arm Assembly BAG 1 2 Socket Head Cap Screw, 1-1/4" 2 Socket Head Cap Screw, 1/2" 2 Button Head Cap Screw, 3/8" 6 Nuts 1 Gear Hub Spacer 1 Flat Building Plate 1 Single
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationNOTE: Top section pole (Q) is packed INSIDE bottom section pole (S)
Form 0905-0 Instructions and Parts List TM- Mini Castle (modified) MARTIN SAFETY SYSTEM NOTES: () A complete system is packed in two boxes post box and house box. House box contains hardware for both post
More informationA Generic Sauna Room Assembly Manual
A Generic Sauna Room Assembly Manual Parts List Exterior 1. Ceiling Assembly 2. Wall Elements 3. Exterior Mouldings 4. Top Exterior Mouldings 5. Bottom Exterior Mouldings 6. Main Base Frame 7. ABS Bolt
More informationInstallation manual. For setting in concrete/on base plates - Panel height 1830
1 Aluminium fencing and drive-in gates Installation manual For setting in concrete/on base plates - Panel height 1830 Aluclos system components: U10 Connecting U-bracket 1900 mm CL18/CL18.XL Half-height
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
More informationSTOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets
Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench
More informationIMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the
PART # 1608990 STATIC BRIDGE & RETURN MODULE 1. This sheet covers the steps to install a static bridge or return module with the FX no hinged access panel back option to a height adjustable freestanding
More informationPRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions
PRE-ENGINEERED HORSE STALL SYSTEMS 4800 SDFD SLIDING DOOR c/w FOLD-DOWN GRILL & Assembly Installation Instructions 4800 SDFD Sliding Door c/w Fold-Down Grill Components - 1 3 /4" x 2" x 88" channels (2)
More informationAlufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition
ALUFIX BASIC SETS 2 ALUFIX BASIC-SETS Alufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition ALUFIX BASIC-SETS Note:
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS v2012 orizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications:
More informationHardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers
Hardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers Hinge Nuts Spring Bolt Washers Bolts - Hinge Contents Ramp and door accessories: Hinges, spring bolts, antiluce plates, gas
More informationW1610 1/2 10 X 16 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is suggested.
adlonco@hotmail.com W60 / 0 X 6 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is suggested. Requires 96 clearance at the wall Base Dimensions 90 x 8, Largest Dimensions 90 x (see pg.3)
More informationaluline 1 These aluboard8 rails are black anodised, as per customer s request.
p. 8 aluline These aluboard8 rails are black anodised, as per customer s request. 2 The steel shelves are powder coated in black in order to match with the rails. 5 Of course, the mobile shop stands made
More informationATLANTIS RAIL Contact Information
ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing
More informationDX450 Red-D-Arc PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-582 RETURN TO MAIN INDEX PARTS LIST FOR DX450 Red-D-Arc P-582 Index of Sub
More information4 BAY Low Profile WALL MOUNT CABINET
D1/347 SSEMLY INSTRUCTIONS 4 Y Low Profile WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use to prevent tipping in compliance with capacity of cabinet specified. Use with heavier
More informationAssembly Instructions
InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective
More informationHARDWARE KIT # KKM or Rear Compartment: (Some hardware not used in all applications)
PRISONER TRANSPORT INSTRUCTIONS for CHEVROLET EXPRESS VAN PT-C01-100-2A TOOLS REQUIRED: Standard and Metric Socket Sets Awe or Scribe Tape Measure Impact Gun (recommended) Pry-bar Caulk gun Drill & drill
More informationN. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems
More informationPerimeter Guard Systems. Safety. Products. Products & Solutions
Products & Solutions Flotronics Automation Safety Products Automation Conveyors Doors Enclosures Gantries Perimeter Guard Systems Solar Test Stands Work Stations Other Featuring The Patented Powerlock
More informationPARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-543 P-543 RETURN TO MAIN INDEX PARTS LIST FOR ! P-543-A P-543-A 1 ILLUSTRATION
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationWINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS
WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com See garage door owner s manual for
More informationCTTR Tire Rack Required tools
CTTR Tire Rack Required tools Torque wrench, ratchet, 9/16 socket, tape measure, and square edge. ASSEMBLY REQUIREMENTS *Torque all T-bolt nuts to 35-40 foot pounds. Failure to follow the assembly instructions
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationCNC Router Parts PRO Machine Kit Cable Track Installation Instructions
1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the
More informationMerloni Elettrodomestici. Technical Fitting Manual FRIDGE. Language Issue/Edition Page GB /
GB 99-11-03/01 1-38 Index 1 CONFORMITY OF APPLIANCE 3 2 MAIN ASSEMBLY TYPES 3 2.1 Under worktop 3 2.2 Double door 10 2.3 Combined 14 2.4 Single door Fridge or single door Freezer 19 2.5 Combined free-standing
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationDehydrator Box Build Plan
Dehydrator Box Build Plan Cut Sheet Metal 1. Using a foot shear or similar tool, cut all the sheet metal components to the correct dimensions. For dimensions, refer to drawings LS-101F (Top/Side Panel)
More informationASSEMBLY INSTRUCTIONS FOR SL500A AND SL500AL
ASSEMBLY INSTRUCTIONS FOR SL500A AND SL500AL January 2013 The SL500A is a square upright glass cabinet with a single hinged lockable door. It has five adjustable shelves plus the base. It also has an optional
More informationTM12 ASSEMBLY INSTRUCTIONS
TM12 ASSEMBLY INSTRUCTIONS Congratulations on purchasing the finest purple martin house available. Nature House Brand houses are the proven leader in aluminum martin housing for over half a century. After
More informationOptical Cable Entry Facility (OCEF) Installation Instructions
Instruction Sheet 860380690 Uniprise Solutions Optical Cable Entry Facility (OCEF) Installation Instructions General The Optical Cable Entry Facility (OCEF) cabinets store optical fiber splices between
More information