v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

Size: px

Start display at page:

Download "v1.0 ASSEMBLY GUIDE Mia Wide Bookcase"

Stewart Armstrong
5 years ago
Views:

1 v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

2 Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.

3 Components Item Description Qty. Item Description Qty. 1 Left side panel x 1 10 Leg x 4 2 Right side panel x 1 11 Back panel x 1 3 Top panel x 1 Back panel x 1 4 Bottom panel x 1 13 Drawer front x 1 5 Fixed shelf x 1 14 Left drawer side x 1 6 Adjustable shelf x 4 15 Right drawer side x 1 7 Top back rail x 1 16 Drawer back x 1 8 Middle back rail x 1 17 Drawer bottom x 1 9 Bottom back rail x 1 18 Support drawer x 1 12

4 Hardware Item Description Qty. Item Description Qty. A Steel dowel 07 x 49.5mm P Wood shelf support x16 B Grub screw x8 Q Allen key M4 x 30 x 107 x1 C Steel dowel 07 x 70mm R Steel dowel 07 x 70mm x2 D Cam screw 07 x 44.5mm x10 S Small steel dowel 5.5 x 45mm x2 E Cam lock 15 x 12.5mm x10 T Round head screw 04 x 40mm F Dowel 08 x 30mm x14 U Dowel 06 x 30mm G Cross dowel M8 x 12 x 30mm V Cross dowel M8 x 12 x 30mm x1 H Threaded bolt M8 x 60mm W Trim cap J Flat washer 8.4 x 17 x 1.6mm X Round head screw 04 x 25mm x1 K Lock washer 8.4 x 2mm aa Mounting plate x2 L Hex nut M8 x 13mm bb Nylon strap x1 M Spanner x1 cc Flat head screw 04 x 17mm x2 N Round head screw 3.5 x 15mm 0 dd Small grub screw M7 x 7.5mm x2

5 Step 1 Attach cam screws (D) into the pre-drilled holes on left side panel (1) as shown. Use a screwdriver to turn screws (D) clockwise to tighten. D x 5 Step 2 Attach cam screws (D) into the pre-drilled holes on right side panel (2) as shown. Use a screwdriver to turn screws (D) clockwise to tighten. D x 5

6 Step 3 Attach steel dowels (A) into top panel (3) by screwing dowels (A) into the inset fittings that are located on part (3) as shown. Use a pozi screwdriver to turn dowels (A) clockwise to tighten. Ensure the direction of the holes on dowels (A) are facing correctly as per diagram. A x 4 Step 4 C x 4 Attach steel dowels (C) into bottom panel (4) by screwing dowel (C) into the inset fittings that are located on part (4) as shown. Use a pozi screwdriver to turn dowels (C) clockwise to fix. Ensure the direction of the holes on dowels (C) are facing correctly as per diagram.

7 Step 5 Insert dowels (F) into the pre-drilled holes on fixed shelf (5) as shown. F x 4 5 Step 6 Insert dowels (F) into the pre-drilled holes on rails (7), (8), (9) as shown. Fx10

8 Step 7 E x Attach rails (7), (8), (9) and fixed shelf (5) onto left side panel (1) as shown. Ensure cam screws (D) and dowels (F) are aligned correctly with the holes of mating parts before attaching. 7.2 Secure rails (7), (8), (9), and fixed shelf (5) to side panel (1) using cam locks (E) as shown. Use a pozi screwdriver to turn cam locks (E) clockwise to tighten. Step 7.2 Step 7.2

9 Step 8 E x Attach right side panel (2) onto rails (7), (8), (9) and fixed shelf (5) as shown. 8.2 Secure side panel (2) to rails (7), (8), (9) and shelf (5) using cam locks (E) as shown. Use a pozi screwdriver to turn cam locks (E) clockwise to tighten. Step 8.2

10 Step 9 B x 8 R x Attach top panel (3) and bottom panel (4) onto the structure assembled in Step 8 as shown. Ensure steel dowels (A), (C) and wooden dowels (F) are aligned correctly with the holes of mating parts before attaching. 9.2 Secure top panel (3) and bottom panel(4) to side panels (1), (2) using grub screws (B) as shown. Use a screwdriver to turn grub screws (B) clockwise to tighten. 9.3 Attach trim cap (W) onto the holes on side panels (1) & (2) as shown. 9.4 Secure top panel (3) to rail (7) using hex head bolts (R) as shown. Use allen key (Q) to turn bolts (R) clockwise to tighten. Q x 1 W x 4 Step 9.4 Step 9.2 Step 9.3

11 Step 10 Attach back panels (11), (12) onto back side of the unit using round head screws (N) as shown. Use a screwdriver to turn screws (N) clockwise to tighten. N0

12 Step 11 G x Insert cross dowels (G) into the legs (10) by placing each dowel (G) into the holes on top of each leg (10). Ensure the horizontal marking on each dowels (G) is facing as shown Screw threaded bolts (H) into dowels (G) that are already concealed in legs (10) as shown. Continue to re-tighten until they are securely fastened. H x 4 Step 11.1 Step 11.2

13 Step Attach leg (10) onto bottom panel (4) by inserting threaded bolt (H) through the pre-drilled hole of metal corner bracket as shown Insert in order the flat washer (J), lock washer (K) and hex nut (L) onto threaded bolt (H) on leg (10) and as shown. J x 4 K x Tighten hex nut (L) using spanner (M) as shown. Continue to re-tighten hex nut (L) until securely fastened. Repeat above procedures with the remaining legs. L x 4 M x 1

14 Step 13 S x Attach small steel dowels (S) into the pre-drilled holes on drawer front (13) by screwing steel dowels (S) into the inset fittings that are located onto drawer front as shown. Ensure the direction of the holes on steel dowels (S) are facing correctly as per diagram Insert dowels (U) into the pre-drilled holes on drawer sides (14), (15) as shown. U x 4 Step 13.1 Step 13.2 Step 14 Attach drawer sides (14) & (15) onto drawer front (13) using small grub screws (dd) as shown. Ensure small steel dowels (S) and dowels (U) are aligned correctly with the holes of mating parts before attaching. Use a screwdriver to turn screws (dd) clockwise to tighten. dd

15 Step Slide drawer bottom (17) into the slots inside drawer sides (14) & (15) as shown. Ensure the drawer bottom (17) is placed completely in the slot of drawer front (13) Attach support drawer (18) onto drawer front (13) as shown. Step 16 T x 4 V x Place drawer back (16) onto the top of constructed drawer box. Ensure the slot under drawer back (16) is aligned correctly with drawer bottom (17) before attaching Secure drawer back (16) to the drawer box using round head screws (T) as shown Secure wood support drawer (18) to drawer back (16) using round head screw (V) and to drawer front (13) using round head screw (X) as shown. Use a screwdriver to turn screws (V), (X) clockwise to tighten. X x 1 Step 16.2 Step 16.3

16 Step 17 P x Insert wood shelf supports (P) into the pre-drilled holes inside the unit as shown Slide adjustable shelves (6) into unit. Ensure the holes on shelves are facing down, then place them onto the pins of wood shelf supports (P) as shown. Step 17.1 Step 17.2 Step 17.2 Step 17.2 Step 17.2

17 Step 18 Insert the assembled drawer into the unit as shown.

18 Tip Kit Instructions Notice: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit included with this project. Attaching furniture to wall with anti-tip kits. 1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket screw holes. They should be place approximately 1 below the bottom of the back of the piece of furniture. 2. Drill the hole and use the appropriate wall plug that is suitable for your walls composition. Warning: before drilling check wall for hidden pipes and cables. 3. Attach the mounting bracket vertically to the wall using appropriate fastener, through the holes in the bracket and 2 wall plugs that are suitable to your wall and then tighten securely. 4. Next using the short screws attach the 2nd bracket to the back of the piece of furniture s top. 5. Lace the nylon strap through the brackets. Slide the thin end of the strap through the receiving end of the nylon strap. Pull to tighten the piece of furniture snug against wall. Wood If ﬁxing to wood make sure that is isn t chipboard as screws can easily pull away from the core structure. Brick or Masonry Cavity Wall Use an appropriate wall plug provided when you are sure your wall is sound. Special toggle wall plugs are needed. Seek expert advice.

ASSEMBLY GUIDE. Mia Narrow Bookcase

ASSEMBLY GUIDE. Mia Narrow Bookcase ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step