API SC 17 SUBCOMMITTEE ON SUBSEA PRODUCTION SYSTEMS. API 17G Standards for Subsea Well Intervention Systems TASK GROUP STATUS

Transcription

1 API SC 17 SUBCOMMITTEE ON SUBSEA PRODUCTION SYSTEMS API 17G Standards for Subsea Well Intervention Systems TASK GROUP STATUS 14 JUNE 2017

2 TABLE OF CONTENTS 1. STATUS... 1 MEMBERSHIP... 1 WORK IN PROGRESS... 4 API STANDARD 17G (3 RD EDITION) TABLE OF CONTENTS... 4 API 17G1 (1 ST EDITION) TABLE OF CONTENTS... 7 i

3 1. STATUS Several work group teams have been working since the beginning of the year to go through all of the last 17G ballot to resolve comments/objections and rework the text accordingly, along with moving sections between 17G and 17G1 that were misplaced in the previous ballots. Table of Contents for 17G and 17G1 (listing all of the section subjects revised/moved) are at the end of this report. A revised letter ballot draft for 17G has been completed and sent to API for ballot submittal on May 27, Work groups are currently working on resolving outstanding comments/objections of all remaining text now residing in 17G1. Target for resolving all comments is June 30, and rewrite and proofread of the text is July 31. Comments received from the comment ballots in 2016 for working drafts of 17G2, 17G3 - titanium, 17G3- aluminum, and 17G4 have been resolved, but any further work on revising text has been put on hold until the parent documents (17G and 17G1) are out for letter ballot vote. MEMBERSHIP Tables 1 and 2 list the current roster for the API task group: TABLE 1: API 17G TASK GROUP MEMBERS Name Company Address Brian Skeels TechnipFMC brian.skeels@technipfmc.com Tony Muff TechnipFMC anthony.muff@technipfmc.com Ray Stawaisz Chevron staw@chevron.com Joe Scranton ALTISS Technologies joe@altisstech.com Gary Rytlewski Retired - Schlumberger gary@mechexp.com Mike Byrd Brian Saucier 1 mike@byrdenergyservices.com brian-saucier@comcast.net Jim Miller Chevron james.miller@chevron.com Richard Cummings Chevron rcummings@chevron.com Paul Deacon Expro Group paul.deacon@exprogroup.com Jamie Walker Expro Group jamie.walker@exprogroup.com Derek Ferguson Expro Group derek.ferguson@exprogroup.com Finn Kirkemo Statoil fkir@statoil.com Lorents Reinås Statoil rex@statoil.com Tore Geir Wernø Statoil TGW@statoil.com Anish Simon Statoil ANISIM@statoil.com Mirick Cox ExxonMobil mirick.t.cox@exxonmobil.com Merrick Kelley BP merrick.kelley@bp.com Bob Johansen BP bob.johansen@uk.bp.com Matthew Law BP matthew.law@bp.com Anelsy Mayorga-Baker anelsy@mac.com

4 Virgilio Garcia Tetra Technologies Joseph Savoy Wild Well Control Bill Siersdorfer One Subsea Oguzhan Guven Schlumberger Mike Hess Shell John Smiley Shell Bill Cowan ENI Colin Johnston SeaNation LLC David Lauer Helix Energy Drummond Lawson Subsea Technologies Ltd. Mitch Dziekonski ALTISS Technologies Lisa Winfrey GE Oil & Gas Bill Parks Bandera Subsea David Alexander GE Oil & Gas Alan Whooley MCS Kenny Partha Sharma DNVGL Shane Siebenaler Southwest Research Institute David Charvoz TechnipFMC Roy Whiteman TechnipFMC Elliot Turbeville TechnipFMC Steven Scheibel Halliburton Mike Swift Hess Corporation Neil Crawford Oceaneering Ramsay Cook Oceaneering Elliott Turbeville TechnipFMC Craig Harvey Aker Solutions Craig Piercy TechnipFMC Paul Beauchamp NOV-Grant Prideco Lalit Karlapalem NOV Inge Helge Knutsen Statoil Brendan Campbell Total Tony Ray Total Russell Hoshman BSEE Rita Painter James Fisher Group Mark Hamilton Stress Engineering Don Perkins Halliburton Bob Sims Becht Engineering David Cain Lloyd's Register - Drilling david.cain@lr.org Ellen Benedikte Lofthus Hald Statoil EBLOF@statoil.com Eric Baltmanis ExxonMobil eric.j.baltmanis@exxonmobil.com Bobby Voss GE Oil & Gas bobby.voss@ge.com 2

5 Man Pham Anadarko Anand Kalimuthu WOM Andy Henderson Oceaneering Jake Hennig Oceaneering Andy Todd M&M Oil Tools Jonathan Miller InterMoor Michael Bailey Superior Well Services Jonathan Miller InterMoor Brent Boyce DOF Subsea Louis Archuleta Aramco Services Howard Chiang Aramco Services Cody Reynolds MasterFlo Tom Plank ConocoPhillips Greg Cellos BSEE Christy Lan BSEE Casey Kavanaugh BSEE Megan Sculley ABS Harriett Kinney ABS Henrique Ludovico Weatherford Steven Canny Weatherford Dennis Kaminski Anadarko Mahesh Sonawane 2H Offshore Shankar Sundararaman 2H Offshore Mike Campbell 2H Offshore Jeff Goetz Mike Ward NOV - Texas Oil Tools mike.ward@nov.com Ewan Allstaff Total ewan.allstaff@total.com Cole Melancon One Subsea cole.melancon@onesubsea.com Sterling Lewis ExxonMobil sterling.f.lewis@exxonmobil.com David Jenner Island Offshore davidj@islandoffshore.com TABLE 2: API BABY 17G TASK GROUP LEADERS API 17G3 Use of Non Ferrous Alloys in Intervention Systems API 17G2 Well Injection, Hydrate Remediation API 17G4 Riserless Light Well Intervention Name Name Name Mitch Dziekonski AlTiSS (Chair) Mike Hess - Shell (Chair) Neil Crawford - Oceaneering (Chair) 3

6 WORK IN PROGRESS API STANDARD 17G (3 RD EDITION) TABLE OF CONTENTS (submitted to API for LETTER ballot May 27, 2017) API Foreword... 1 Introduction Scope Equipment Scope Out of scope equipment Nomenclature Regulations, Codes, and Standards Normative references Definitions, abbreviations, and symbols Terms and Definitions Abbreviated Terms and Symbols Functional requirements Purpose Common Requirements Tubing Hanger Orientation System BOP Spacer/Spanner Joint Tubing Hanger / Orientation Joint (THOJ) Subsea Test Tree Assembly Subsea Test Tree Subsea Test Tree Latch Shear Sub Retainer Valve Lubricator Valve SSTT crossover Chemical Injection Sub Ported Slick Joint Tubing Hanger Running Tool Adapter Bore Selector Adjustable Fluted Hanger Assembly Lower Workover Riser Package Emergency Disconnect Package Well Control Package Connectors Landing String Joints C/WO Riser Joints Stress Joint Tension joint Cased Wear Joint Riser Sealing Mandrel Surface Tree Adapter Joint Surface Tree Wireline/coiled Tubing Adapters Surface Tree Tension Frame Swivel

7 4.33 Auxiliary Line Riser Spiders Riser and Landing String Handling Tools Umbilical Clamps Miscellaneous Auxiliary Equipment Safety Joints/weak links Design requirements General Design Principles Design Loads Design Criteria Pipe Design Criteria Connector Design Requirements Valves, Rams, and Actuators Design Requirements Specific Design Requirements Pressure Containing Components and Equipment Specific Design Requirements Primary Structural Components and Equipment Material requirements Introduction General Material Requirements Products and Parts Welding requirements General Welding Procedure Qualification Rotary Friction Welding Additional Requirements Welding Consumables Fatigue Performance of Girth Weld Corrosion Resistant Weld Overlay Heat Treatment after Forming and Welding Repair Welding Quality requirements General Manufacturer Responsibility Quality System Requirements Measuring and Testing Equipment Quality Control Personnel Qualifications Quality Control Requirements Product qualification Drift Requirements Factory Acceptance Testing System Integration Tests Documentation requirements Purpose Marking requirements General Marking Method Hidden Marking Preservation, Storage, and Shipping

8 11.1 General Subsea Well Intervention Equipment Annex A Annex B (normative) Intervention Workover Control System (IWOCS) Annex C (normative) Load Capacities Annex D (normative) Fatigue Load Capacities Annex E (normative) Validation of Connectors Annex F (informative) Equipment Specification Datasheets Annex G (normative) Verification and Validation Testing of Subsea Test Tree Assemblies and Associated Accessories.299 Annex H (normative) Verification and Validation Testing of Well Control Devices for openwater Intervention Systems 336 6

9 API 17G1 (1 ST EDITION) TABLE OF CONTENTS (comment resolution by June 30, 2017) 1 Scope Normative references Definitions, abbreviations, and symbols Terms and Definitions Abbreviated Terms and Symbols System Requirements General Responsibilities Interface Management Plan System Engineering System Definition System Design Risk Assessment System Review System Functional Requirements Design Principles Operational Principles Safety Principles Safety Strategy Barrier Requirements Operational Requirements Requirements for Personnel Qualifications Quality System and Quality Control Verification and Validation Documentation, Records, and Traceability Systems Integration Testing (SIT) Purpose Objective and Scope Testing of Subsea Test Tree Assemblies and Associated Accessories Testing of Well Control Devices for Open-water Intervention Systems Inspection, Maintenance, Monitoring, and Refurbishment General Inspection and Maintenance Monitoring Recertification of System Refurbishment Test Requirements Data and Documentation Requirements Operational Requirements Including Barrier Definition and Testing Introduction General Requirements Testing Requirements Operational Risk Assessment Crew Drills Equipment Readiness Verification and Validation

10 8 Global Riser Analysis Scope Application Operating Conditions and Load Combinations Analysis Basis Analysis Methods Analysis Model Model Verification Load and Load Effects Weak Link Assessment Post-processing Operating Limitations Documentation Basis of Design Safety Requirements Specification Maintenance Documentation Installation and Operation Manual Condition Summary Global Analysis Annex A (normative) Intervention Connection Interfaces Annex B (informative) Guidance for Global Riser Analysis