High-Voltage, High-Current DUAL OPERATIONAL AMPLIFIER
|
|
- Juniper Cunningham
- 5 years ago
- Views:
Transcription
1 High-Voltage, High-Current DUL OPERTIONL MPLIFIER FETURES HIGH OUTPUT CURRENT: min WIDE POWER SUPPLY RNGE: ±V to ±3V SLEW RTE: 8V/µs INTERNL CURRENT LIMIT THERML SHUTDOWN PROTECTION FET INPUT: I = p max 8-PIN HERMETIC TO-3 ND -LED PLSTIC PCKGES PPLICTIONS MOTOR DRIVER PROGRMMLE POWER SUPPLY SERVO MPLIFIER VLVES, CTUTOR DRIVER MGNETIC DEFLECTION COIL DRIVER UDIO MPLIFIER DESCRIPTION The is a dual high-voltage/high-current operational amplifier suitable for driving a wide variety of high power loads. It provides output current and power supply voltage range extends to ±3V. The integrates two high performance FET op amps with high power output stages on a single monolithic chip. Internal current limit and thermal shutdown protect the amplifier and load from damage. The is available in a hermetic 8-pin metal TO-3, and -lead plastic packages. Models are available in C to +8 C, and C to + C temperature ranges. V+ In +In 3 Out Case connected to V Supply. Out V TO-3 Package Electrically Isolated 6 7 +In Top View 8 In NC V+ V International irport Industrial Park Mailing ddress: PO ox Tucson, Z 873 Street ddress: 673 S. Tucson lvd. Tucson, Z 876 Tel: () 76- Twx: 9-9- Cable: RCORP Telex: FX: () 889- Immediate Product Info: (8) urr-rown Corporation PDS-9 Printed in U.S.. July, 99
2 SPECIFICTIONS t T CSE = + C and V S = ±3V, unless otherwise noted. T M SM PRMETER CONDITIONS MIN TYP MX MIN TYP MX UNITS OFFSET VOLTGE Input Offset Voltage ± ± * * mv vs Temperature Specified Temp. Range ± * µv/ C vs Power Supply V S = ±V to ±3V ± ± * * µv/v INPUT IS CURRENT () Input ias Current V CM = V ± ± * * p vs Temperature Doubles every C * Input Offset Current V CM = V ± ± * * p NOISE Input Voltage Noise Noise Density, f = khz 36 * nv/ Hz Current Noise Density, f = khz 3 * f/ Hz INPUT VOLTGE RNGE Common-Mode Input Range Positive Linear Operation (V+) 6 (V+) * * V Negative Linear Operation (V ) +6 (V ) + * * V Common-Mode Rejection V CM = ±V S -6V 9 6 * * d INPUT IMPEDNCE Differential 8 * Ω pf Common-Mode * Ω pf OPEN-LOOP GIN Open-Loop Voltage Gain V O = ±3V, R L = Ω 9 3 * * d FREQUENCY RESPONSE Gain-andwidth Product R L = Ω. * MHz Slew Rate 6Vp-p, R L = Ω 8 * * V/µs Full-Power andwidth See Typical Curve * Settling Time.% G =, 6V Step * µs Total Harmonic Distortion See Typical Curve * OUTPUT Voltage Output: Positive I O = (V+) (V+). * * V Negative I O = (V ) + (V ) +3.8 * * V Positive I O =. (V+). (V+) 3.8 * * V Negative I O =. (V ) + (V ) +3. * * V Current Output See SO Curves * Short-Circuit Current ± * POWER SUPPLY Specified Operating Voltage ±3 * V Operating Voltage Range ± ±3 * * V Quiescent Current (total) I O = ± ±3 * * m TEMPERTURE RNGE Operating Range +8 + C Storage, Metal TO-3 Package 6 + * * C Plastic Package + C Thermal Resistance, θ JC oth mplifiers, f > Hz * C/W Thermal Resistance, θ JC oth mplifiers, DC. * C/W Thermal Resistance, θ JC One mplifier, f > Hz.7 * C/W Thermal Resistance, θ JC One mplifier, DC 3 * C/W Thermal Resistance, θ J No Heat Sink 3 * C/W * Specifications same as M. NOTES: () High-speed test at T J = C. () Calculated from total power dissipation of both amplifiers. The information provided herein is believed to be reliable; however, URR-ROWN assumes no responsibility for inaccuracies or omissions. URR-ROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. URR-ROWN does not authorize or warrant any URR-ROWN product for use in life support devices and/or systems.
3 CONNECTION DIGRMS Top View TO 3 Front View -Lead Plastic V+ In +In 3 Out Case connected to V Supply. Out 8 In V 6 7 +In Case is electrically isolated. NC V+ V ORDERING INFORMTION TEMPERTURE MODEL PCKGE RNGE T -Lead Plastic C to +8 C M 8-Pin Metal TO-3 C to +8 C SM 8-Pin Metal TO-3 C to + C PCKGE INFORMTION PCKGE DRWING MODEL PCKGE NUMER () T -Lead Plastic M 8-Pin Metal TO-3 3 SM 8-Pin Metal TO-3 3 NOTE: () For detailed drawing and dimension table, please see end of data sheet, or ppendix D of urr-rown IC Data ook. US OEM PRICES MODEL T $.8 $.6 $. M SM SOLUTE MXIMUM RTINGS Supply Voltage, V+ to V... 7V Output Current... See SO Curve Input Voltage... (V ).7V to (V+) +.7V Operating Temperature... C to + C Storage Temperature, Metal TO-3 Package... C to + C Plastic Package... C to + C Junction Temperature... C Lead Temperature (soldering, s)... 3 C ELECTROSTTIC DISCHRGE SENSITIVITY This integrated circuit can be damaged by ESD. urr-rown recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. 3
4 DICE INFORMTION 7 6D 6C 6 6 PD FUNCTION 8, Out,, C, D V+ 3 +In In, Out 6, 6, 6C, 6D V 7 +In 8 In Substrate ias: Internally connected to V power supply. MECHNICL INFORMTION MILS (.") MILLIMETERS Die Size 8 x ± 8.8 x 9.9 ±.3 Die Thickness ±3. ±.8 Min. Pad Size x. x. C D 3 acking Chromium-Silver DIE TOPOGRPHY TYPICL PERFORMNCE CURVES T CSE = + C, V S = ±3V unless otherwise noted. OPEN-LOOP GIN ND PHSE vs FREQUENCY n INPUT IS CURRENT vs TEMPERTURE Gain (d) 8 6 R L = Ω Phase ( ) Input ias Current () n p p I I OS k k k M M p 7 7 Temperature ( C)
5 TYPICL PERFORMNCE CURVES (CONT) t T CSE = + C and V S = ±3V, unless otherwise noted. CURRENT LIMIT vs TEMPERTURE 6 QUIESCENT CURRENT vs TEMPERTURE Limit Current () 3 Quiescent Current (m) V S = ±V V S = ±3V 7 7 Temperature ( C) Temperature ( C) Voltage Noise (nv/ Hz) 8 6 VOLTGE NOISE DENSITY vs FREQUENCY Crosstalk (d) 6 8 CHNNEL CROSSTLK vs FREQUENCY 9kΩ kω Ω 9kΩ kω V X k k k k k k M COMMON-MODE REJECTION vs FREQUENCY POWER SUPPLY REJECTION vs FREQUENCY Common-Mode Rejection (d) Power Supply Rejection (d) 8 6 V Supply V+ Supply k k k M k k k M
6 TYPICL PERFORMNCE CURVES (CONT) t T CSE = + C and V S = ±3V, unless otherwise noted. Gain-andwidth Product (MHz).... GIN-NDWIDTH PRODUCT ND SLEW RTE vs TEMPERTURE SR+ SR Slew Rate (V/µS) Output Voltage (V) 3 3 MXIMUM OUTPUT VOLTGE vs FREQUENCY Clipping Slew Rate Limited Temperature ( C) k k k TOTL HRMONIC DISTORTION + NOISE vs FREQUENCY OUTPUT VOLTGE SWING vs OUTPUT CURRENT THD + N (%).. R L = Ω mw W 3W V SUPPLY V OUT (V) 3 (V+) V O (V ) V O. k k k 3 Output Current () 6 OUTPUT VOLTGE SWING vs TEMPERTURE V SUPPLY V OUT (V) 3 I O = + I O = +. I O = I O =. 7 7 Temperature ( C) 6
7 TYPICL PERFORMNCE CURVES (CONT) t T CSE = + C and V S = ±3V, unless otherwise noted. SMLL SIGNL RESPONSE G = 3, C L = nf LRGE SIGNL RESPONSE G = 3, R L = Ω mv/div V/div µs/div µs/div PPLICTIONS INFORMTION Figure shows the connected as a basic noninverting amplifier. The can be used in virtually any op amp configuration. Power supply terminals should be bypassed with low series impedance capacitors. The technique shown, using a ceramic and tantalum type in parallel, is recommended. Power supply wiring should have low series impedance and inductance. SFE OPERTING RE Stress on the output transistors is determined by the output current and the voltage across the conducting output transistor, V CE. The power dissipated by the output transistor is equal to the product of the output current and the voltage across the conducting transistor, V CE. The Safe Operating rea (SO curve, Figure ) shows the permissible range of voltage and current. V IN R kω µf.µf + +3V V+ R kω /.µf R G = + = 3 R V O Z L Output Current (). Output current may be limited to less than see text. SFE OPERTING RE Current-Limited T C = 8 C T C = C T C = C µf +. V S V O (V) V 3V FIGURE. asic Circuit Connections. FIGURE. Safe Operating rea. 7
8 The safe output current decreases as V CE increases. Output short-circuit is a very demanding case for SO. shortcircuit to ground forces the full power supply voltage (V+ or V ) across the conducting transistor. With V S = ±3V the safe output current is. (at C). The short-circuit current is approximately which exceeds the SO. This situation will activate the thermal shutdown circuit in the. For further insight on SO, consult -39. CURRENT LIMIT The has an internal current limit set for approximately. This current limit decreases with increasing junction temperature as shown in the typical curve, Current Limit versus Temperature. This, in combination with the thermal shutdown circuit, provides protection from many types of overload. It may not, however, protect for shortcircuit to ground, depending on the power supply voltage, ambient temperature, heat sink and signal conditions. POWER DISSIPTION Power dissipation depends on power supply, signal and load conditions. For DC signals, power dissipation is equal to the product of output current times the voltage across the conducting output transistor. Power dissipation can be minimized by using the lowest possible power supply voltage necessary to assure the required output voltage swing. For resistive loads, the maximum power dissipation occurs at a DC output voltage of one-half the power supply voltage. Dissipation with C signals is lower. pplication ulletin -39 explains how to calculate or measure power dissipation with unusual signals and loads. HETSINKING Most applications require a heat sink to assure that the maximum junction temperature is not exceeded. The heat sink required depends on the power dissipated and on ambient conditions. Consult pplication ulletin -38 for information on determining heat sink requirements. The case of the metal TO-3 model of the is electrically isolated from all circuitry and can be connected directly to a heat sink. This eliminates cumbersome insulating hardware that increases thermal resistance. Consult pplication ulletin -37 for proper mounting techniques and procedures for TO-3 power products. The heat sink tab of the plastic package is connected to the V power supply terminal. Lowest thermal resistance can be achieved by mounting the tab directly to a heat sink. If the heat sink cannot be electrically hot at V power supply potential, insulating hardware must be used. THERML PROTECTION The has thermal shutdown that protects the amplifier from damage. ny tendency to activate the thermal shutdown circuit during normal operation is indication of excessive power dissipation or an inadequate heat sink. The thermal protection activates at a junction temperature of approximately C. For reliable operation, junction temperature should be limited to C, maximum. To estimate the margin of safety in a complete design (including heat sink), increase the ambient temperature until the thermal protection is activated. Use worst-case load and signal conditions. For good reliability, the thermal protection should trigger more than C above the maximum expected ambient condition of your application. This produces a junction temperature of C at the maximum expected ambient condition. Depending on load and signal conditions, the thermal protection circuit may produce a duty-cycle modulated output signal. This limits the dissipation in the amplifier, but the rapidly varying output waveform may be damaging to some loads. The thermal protection may behave differently depending on whether internal dissipation is produced by sourcing or sinking output current. UNLNCED POWER SUPPLIES Some applications do not require equal positive and negative output voltage swing. The power supply voltages of the do not need to be equal. For example, a 7V negative power supply voltage assures that the inputs of the are operated within their linear common-mode range, and that the output can swing to V. The V+ power supply could range from V to 63V. The total voltage (V to V+) can range from V to 7V. With a 63V positive supply voltage, the device may not be protected from damage during short-circuits because of the larger V CE during this condition. OUTPUT PROTECTION Reactive and EMF-generating loads can return load current to the amplifier, causing the output voltage to exceed the power supply voltage. This damaging condition can be avoided with clamp diodes from the output terminal to the power supplies as shown in Figure. Fast-recovery rectifier diodes with a or greater continuous rating are recommended. SOCKET n 8-pin TO-3 socket, urr-rown model 8MC is available. lthough not required, this socket makes mounting and interchanging parts easy, especially during design and testing. 8
9 V+ R kω pf V IN R kω R kω / R G = = R D V IN R kω Master.Ω kω V = R /R = L V D Ω.µF Motor D, D : Motorola MUR Fast Recovery Rectifier. Paralleled operation not recommended for input signals that can cause amplifiers to slew. Slave pf.ω FIGURE 3. Motor Drive Circuit. FIGURE. Paralleled Operation, Extended SO. +3V +3V kω kω kω kω 3nF V IN ±V G = +3 3Ω Load Vp-p (±6V) G = kω 3V 3V FIGURE. ridge Drive Circuit. 9
10 PCKGE DRWINGS
Precision Dual Difet OPERATIONAL AMPLIFIER
OP Precision Dual Difet OPERTIONL MPLIFIER FETURES VERY LOW NOISE: nv/ Hz at khz LOW V OS : µv max LOW DRIFT: µv/ C max LOW I B : p max FST SETTLING TIME: µs to.% UNITY-GIN STBLE PPLICTIONS DT CQUISITION
More informationHigh Current, High Power OPERATIONAL AMPLIFIER
High Current, High Power OPERATIONAL AMPLIFIER FEATURES HIGH OUTPUT CURRENT: A WIDE POWER SUPPLY VOLTAGE: ±V to ±5V USER-SET CURRENT LIMIT SLEW RATE: V/µs FET INPUT: I B = pa max CLASS A/B OUTPUT STAGE
More informationHigh Power Monolithic OPERATIONAL AMPLIFIER
High Power Monolithic OPERATIONAL AMPLIFIER FEATURES POWER SUPPLIES TO ±0V OUTPUT CURRENT TO 0A PEAK PROGRAMMABLE CURRENT LIMIT INDUSTRY-STANDARD PIN OUT FET INPUT TO- AND LOW-COST POWER PLASTIC PACKAGES
More informationHigh Power Monolithic OPERATIONAL AMPLIFIER
High Power Monolithic OPERATIONAL AMPLIFIER FEATURES POWER SUPPLIES TO ±0V OUTPUT CURRENT TO 0A PEAK PROGRAMMABLE CURRENT LIMIT INDUSTRY-STANDARD PIN OUT FET INPUT TO- AND LOW-COST POWER PLASTIC PACKAGES
More informationHigh Current, High Power OPERATIONAL AMPLIFIER
OPA51 High, High Power OPERATIONAL AMPLIFIER FEATURES HIGH OUTPUT CURRENT: ±1A Peak WIDE POWER SUPPLY RANGE: ±1 to ±V LOW QUIESCENT CURRENT:.mA ISOLATED CASE TO-3 PACKAGE APPLICATIONS MOTOR DRIVER SERVO
More informationLow Power, Precision FET-INPUT OPERATIONAL AMPLIFIERS
OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 Low Power, Precision FET-INPUT OPERATIONAL AMPLIFIERS FEATURES LOW QUIESCENT CURRENT: 3µA/amp OPA3 LOW OFFSET VOLTAGE: mv max HIGH OPEN-LOOP GAIN: db min HIGH
More information250mA HIGH-SPEED BUFFER
ma HIGH-SPEED BUFFER FEATURES HIGH OUTPUT CURRENT: ma SLEW RATE: V/µs PIN-SELECTED BANDWIDTH: MHz to MHz LOW QUIESCENT CURRENT:.mA (MHz ) WIDE SUPPLY RANGE: ±. to ±V INTERNAL CURRENT LIMIT THERMAL SHUTDOWN
More informationHigh Speed FET-INPUT OPERATIONAL AMPLIFIERS
OPA OPA OPA OPA OPA OPA OPA OPA OPA High Speed FET-INPUT OPERATIONAL AMPLIFIERS FEATURES FET INPUT: I B = 5pA max WIDE BANDWIDTH: MHz HIGH SLEW RATE: V/µs LOW NOISE: nv/ Hz (khz) LOW DISTORTION:.% HIGH
More informationPrecision Gain=10 DIFFERENTIAL AMPLIFIER
INA Precision Gain= DIFFERENTIAL AMPLIFIER FEATURES ACCURATE GAIN: ±.% max HIGH COMMON-MODE REJECTION: 8dB min NONLINEARITY:.% max EASY TO USE PLASTIC 8-PIN DIP, SO-8 SOIC PACKAGES APPLICATIONS G = DIFFERENTIAL
More informationHigh Current High Power OPERATIONAL AMPLIFIER
OPA High Current High Power OPERATIONAL AMPLIFIER FEATURES WIDE SUPPLY RANGE: ±V to ±V HIGH OUTPUT CURRENT: A Peak CLASS A/B OUTPUT STAGE: Low Distortion SMALL TO- PACKAGE APPLICATIONS SERVO AMPLIFIER
More informationHigh Speed BUFFER AMPLIFIER
High Speed BUFFER AMPLIFIER FEATURES WIDE BANDWIDTH: MHz HIGH SLEW RATE: V/µs HIGH OUTPUT CURRENT: 1mA LOW OFFSET VOLTAGE: 1.mV REPLACES HA-33 IMPROVED PERFORMANCE/PRICE: LH33, LTC11, HS APPLICATIONS OP
More informationProgrammable Gain AMPLIFIER
PGA Programmable Gain AMPLIFIER FEATURES DIGITALLY PROGRAMABLE GAINS: G=,, V/V CMOS/TTL-COMPATIBLE INPUTS LOW GAIN ERROR: ±.5% max, G= LOW OFFSET VOLTAGE DRIFT: µv/ C LOW QUIESCENT CURRENT:.mA LOW COST
More informationHigh Speed FET-Input INSTRUMENTATION AMPLIFIER
High Speed FET-Input INSTRUMENTATION AMPLIFIER FEATURES FET INPUT: I B = 2pA max HIGH SPEED: T S = 4µs (G =,.%) LOW OFFSET VOLTAGE: µv max LOW OFFSET VOLTAGE DRIFT: µv/ C max HIGH COMMON-MODE REJECTION:
More informationLow Noise, Low Distortion INSTRUMENTATION AMPLIFIER
Low Noise, Low Distortion INSTRUMENTATION AMPLIFIER FEATURES LOW NOISE: nv/ Hz LOW THDN:.9% at khz, G = HIGH GBW: MHz at G = WIDE SUPPLY RANGE: ±9V to ±V HIGH CMRR: >db BUILT-IN GAIN SETTING RESISTORS:
More informationDual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
www.burr-brown.com/databook/.html Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 25V/µs WIDE GAIN-BANDWIDTH: MHz UNITY-GAIN STABLE
More informationUltra-Low Bias Current Difet OPERATIONAL AMPLIFIER
OPA9 Ultra-Low Bias Current Difet OPERATIONAL AMPLIFIER FEATURES ULTRA-LOW BIAS CURRENT: fa max LOW OFFSET: mv max LOW DRIFT: µv/ C max HIGH OPEN-LOOP GAIN: 9dB min LOW NOISE: nv/ Hz at khz PLASTIC DIP
More informationPrecision OPERATIONAL AMPLIFIER
OPA77 查询 OPA77 供应商 OPA77 OPA77 Precision OPERATIONAL AMPLIFIER FEATURES LOW OFFSET VOLTAGE: µv max LOW DRIFT:.µV/ C HIGH OPEN-LOOP GAIN: db min LOW QUIESCENT CURRENT:.mA typ REPLACES INDUSTRY-STANDARD
More informationHigh Precision OPERATIONAL AMPLIFIERS
OPA OPA OPA OPA OPA OPA OPA OPA OPA For most current data sheet and other product information, visit www.burr-brown.com High Precision OPERATIONAL AMPLIFIERS FEATURES ULTRA LOW OFFSET VOLTAGE: µv ULTRA
More informationPrecision INSTRUMENTATION AMPLIFIER
Precision INSTRUMENTATION AMPLIFIER FEATURES LOW OFFSET VOLTAGE: µv max LOW DRIFT:.µV/ C max LOW INPUT BIAS CURRENT: na max HIGH COMMON-MODE REJECTION: db min INPUT OVER-VOLTAGE PROTECTION: ±V WIDE SUPPLY
More informationPHOTODIODE WITH ON-CHIP AMPLIFIER
PHOTODIODE WITH ON-CHIP AMPLIFIER FEATURES BANDWIDTH: khz PHOTODIODE SIZE:.9 x.9 inch (2.29 x 2.29mm) FEEDBACK RESISTOR HIGH RESPONSIVITY: A/W (6nm) LOW DARK ERRORS: 2mV WIDE SUPPLY RANGE: ±2.2 to ±18V
More informationPrecision, Low Power INSTRUMENTATION AMPLIFIER
Precision, Low Power INSTRUMENTATION AMPLIFIER FEATURES LOW OFFSET VOLTAGE: µv max LOW DRIFT:.µV/ C max LOW INPUT BIAS CURRENT: na max HIGH CMR: db min INPUTS PROTECTED TO ±V WIDE SUPPLY RANGE: ±. to ±V
More informationHigh-Voltage, High-Current OPERATIONAL AMPLIFIER
High-Voltage, High-Current OPERATIONAL AMPLIFIER FEATURES HIGH OUTPUT CURRENT: 2A min WIDE POWER SUPPLY RANGE: ±1 to ±35V SLEW RATE: 8V/µs INTERNAL CURRENT LIMIT THERMAL SHUTDOWN PROTECTION FET INPUT:
More informationDUAL AUTO-ZEROED OPERATIONAL AMPLIFIERS TC913A TC913B GENERAL DESCRIPTION FEATURES ORDERING INFORMATION
DUL UTO-ZEROED FETURES First Monolithic Dual uto-zeroed Operational mplifier Chopper mplifier Performance Without External Capacitors V OS... µv Max V OS Drift....µV/ C Max Saves Cost/ssembly of Four "Chopper"
More informationPrecision, Low Power INSTRUMENTATION AMPLIFIERS
INA9 INA9 INA9 Precision, Low Power INSTRUMENTATION AMPLIFIERS FEATURES LOW OFFSET VOLTAGE: µv max LOW DRIFT:.µV/ C max LOW INPUT BIAS CURRENT: na max HIGH CMR: db min INPUTS PROTECTED TO ±V WIDE SUPPLY
More informationLow-Cost, Internally Powered ISOLATION AMPLIFIER
Low-Cost, Internally Powered ISOLATION AMPLIFIER FEATURES SIGNAL AND POWER IN ONE DOUBLE-WIDE (.6") SIDE-BRAZED PACKAGE 56Vpk TEST VOLTAGE 15Vrms CONTINUOUS AC BARRIER RATING WIDE INPUT SIGNAL RANGE: V
More informationINTEGRATED PHOTODIODE AND AMPLIFIER
FPO 7% ABRIDGED DATA SHEET For Complete Data Sheet Call FaxLine -8-8-633 Request Document Number 8 INTEGRATED PHOTODIODE AND AMPLIFIER FEATURES PHOTODIODE SIZE:.9 x.9 inch (.9 x.9mm) FEEDBACK RESISTOR
More informationHigh Accuracy INSTRUMENTATION AMPLIFIER
INA High Accuracy INSTRUMENTATION AMPLIFIER FEATURES LOW DRIFT:.µV/ C max LOW OFFSET VOLTAGE: µv max LOW NONLINEARITY:.% LOW NOISE: nv/ Hz HIGH CMR: db AT Hz HIGH INPUT IMPEDANCE: Ω -PIN PLASTIC, CERAMIC
More informationSingle Supply, MicroPower INSTRUMENTATION AMPLIFIER
Single Supply, MicroPower INSTRUMENTATION AMPLIFIER FEATURES LOW QUIESCENT CURRENT: µa WIDE POWER SUPPLY RANGE Single Supply:. to Dual Supply:.9/. to ± COMMON-MODE RANGE TO (). RAIL-TO-RAIL OUTPUT SWING
More informationLM675 Power Operational Amplifier
LM675 Power Operational Amplifier General Description The LM675 is a monolithic power operational amplifier featuring wide bandwidth and low input offset voltage, making it equally suitable for AC and
More informationSingle-Ended 16-Channel/Differential 8-Channel CMOS ANALOG MULTIPLEXERS
MPC507 MPC50 MPC50 MPC507 Single-ded -Channel/Differential 8-Channel CMOS NLOG MULTIPLEXERS FETURES NLOG OVERVOLTGE PROTECTION: 70Vp-p NO CHNNEL INTERCTION DURING OVERVOLTGE BREK-BEFORE-MKE SWITCHING NLOG
More informationDual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
www.burr-brown.com/databook/.html Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 25V/µs WIDE GAIN-BANDWIDTH: MHz UNITY-GAIN STABLE
More informationLM675 Power Operational Amplifier
Power Operational Amplifier General Description The LM675 is a monolithic power operational amplifier featuring wide bandwidth and low input offset voltage, making it equally suitable for AC and DC applications.
More informationDual, Current Feedback Low Power Op Amp AD812
a FEATURES Two Video Amplifiers in One -Lead SOIC Package Optimized for Driving Cables in Video Systems Excellent Video Specifications (R L = ): Gain Flatness. db to MHz.% Differential Gain Error. Differential
More informationHigh Common-Mode Rejection. Differential Line Receiver SSM2141 REV. B FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 100 db typ 60 Hz: 100 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.001% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
More informationPrecision High-Speed Difet OPERATIONAL AMPLIFIERS
Precision High-Speed Difet OPERATIONAL AMPLIFIERS FEATURES VERY LOW NOISE: 4.nV/ Hz at khz FAST SETTLING TIME: ns to.% 4ns to.% LOW V OS : µv max LOW DRIFT:.8µV/ C max LOW I B : pa max : Unity-Gain Stable
More informationDual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 2V/µs WIDE GAIN-BANDWIDTH: 2MHz UNITY-GAIN STABLE WIDE SUPPLY RANGE: V S = ±4.
More informationVoltage-to-Frequency and Frequency-to-Voltage CONVERTER
Voltage-to-Frequency and Frequency-to-Voltage CONVERTER FEATURES OPERATION UP TO 00kHz EXCELLENT LINEARITY ±0.0% max at 0kHz FS ±0.0% max at 00kHz FS V/F OR F/V CONVERSION MONOTONIC VOLTAGE OR CURRENT
More informationSGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier
PRODUCT DESCRIPTION The is a low cost, single rail-to-rail input and output voltage feedback amplifier. It has a wide input common mode voltage range and output voltage swing, and takes the minimum operating
More informationDifet Electrometer-Grade OPERATIONAL AMPLIFIER
OPA Difet Electrometer-Grade OPERATIONAL AMPLIFIER FEATURES ULTRA-LOW BIAS CURRENT: fa max LOW OFFSET: µv max LOW DRIFT: µv/ C max HIGH OPEN-LOOP GAIN: db min HIGH COMMON-MODE REJECTION: 9dB min IMPROVED
More informationMIC915. Features. General Description. Applications. Ordering Information. Pin Configuration. Pin Description. Dual 135MHz Low-Power Op Amp
MIC915 Dual 135MHz Low-Power Op Amp General Description The MIC915 is a high-speed, unity-gain stable operational amplifier. It provides a gain-bandwidth product of 135MHz with a very low, 2.4mA supply
More informationHigh-Voltage, Internally Powered ISOLATION AMPLIFIER
ISO17 High-Voltage, Internally Powered ISOLATION AMPLIFIER FEATURES SIGNAL AND POWER IN ONE TRIPLE-WIDE PACKAGE 8Vpk TEST VOLTAGE 5Vrms CONTINUOUS AC BARRIER RATING WIDE INPUT SIGNAL RANGE: 1V to 1V WIDE
More informationImproved Second Source to the EL2020 ADEL2020
Improved Second Source to the EL ADEL FEATURES Ideal for Video Applications.% Differential Gain. Differential Phase. db Bandwidth to 5 MHz (G = +) High Speed 9 MHz Bandwidth ( db) 5 V/ s Slew Rate ns Settling
More informationMONOLITHIC PHOTODIODE AND AMPLIFIER 300kHz Bandwidth at R F = 1MΩ
MONOLITHIC PHOTODIODE AND AMPLIFIER khz Bandwidth at R F = MΩ FEATURES BOOTSTRAP ANODE DRIVE: Extends Bandwidth: 9kHz (R F = KΩ) Reduces Noise LARGE PHOTODIODE:.9" x.9" HIGH RESPONSIVITY:.4A/W (6nm) EXCELLENT
More informationQuad High-Speed Precision Difet OPERATIONAL AMPLIFIER
Quad High-Speed Precision Difet OPERATIONAL AMPLIFIER FEATURES WIDE BANDWIDTH:.MHz HIGH SLEW RATE: V/µs LOW OFFSET: ±µv max LOW BIAS CURRENT: ±pa max LOW SETTLING:.µs to.% STANDARD QUAD PINOUT APPLICATIONS
More informationHA Quad, 3.5MHz, Operational Amplifier. Description. Features. Applications. Ordering Information. Pinouts. November 1996
SEMICONDUCTOR HA4741 November 1996 Features Slew Rate...............................1.6V/µs Bandwidth................................MHz Input Voltage Noise...................... 9nV/ Hz Input Offset Voltage.........................mV
More informationVoltage-to-Frequency and Frequency-to-Voltage CONVERTER
Voltage-to-Frequency and Frequency-to-Voltage CONVERTER FEATURES OPERATION UP TO 500kHz EXCELLENT LINEARITY ±0.0% max at 0kHz FS ±0.05% max at 00kHz FS V/F OR F/V CONVERSION MONOTONIC VOLTAGE OR CURRENT
More informationPrecision, High-Bandwidth Op Amp
EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage
More informationSINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
OPA OPA OPA OPA OPA OPA OPA SINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIERS MicroAmplifier Series FEATURES RAIL-TO-RAIL INPUT RAIL-TO-RAIL OUTPUT (within mv) MicroSIZE PACKAGES WIDE BANDWIDTH:.MHz HIGH
More informationVery Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION
Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8273 FEATURES ±4 V HBM ESD Very low distortion.25% THD + N (2 khz).15% THD + N (1 khz) Drives 6 Ω loads Two gain settings Gain of
More informationHigh-Speed FET-INPUT OPERATIONAL AMPLIFIERS
OP132 OP132 OP2132 OP2132 OP4132 OP4132 OP132 OP2132 OP4132 SBOS054 JNURY 1995 REVISED JUNE 2004 High-Speed FET-INPUT OPERTIONL MPLIFIERS FETURES FET INPUT: I B = 50p max OP132 WIDE BNDWIDTH: 8MHz Offset
More informationSENSOR DESIGN, SIGNAL CONDITIONING, AND INTERFACING PROJECT MAE 534 Mechatronics Design SPRING 1999 Dr. Ramasubramanian
SENSOR DESIGN, SIGNAL CONDITIONING, AND INTERFACING PROJECT MAE 534 Mechatronics Design SPRING 1999 Dr. Ramasubramanian DUE: FEBRUARY 24, 1999 WEDNESDAY AT CLASS TIME. PROJECT DESCRIPTION: Design a Beam-based
More informationSGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,
More information200 ma Output Current High-Speed Amplifier AD8010
a FEATURES 2 ma of Output Current 9 Load SFDR 54 dbc @ MHz Differential Gain Error.4%, f = 4.43 MHz Differential Phase Error.6, f = 4.43 MHz Maintains Video Specifications Driving Eight Parallel 75 Loads.2%
More informationWideband, High Output Current, Fast Settling Op Amp AD842
a FEATURES AC PERFORMAE Gain Bandwidth Product: 8 MHz (Gain = 2) Fast Settling: ns to.1% for a V Step Slew Rate: 375 V/ s Stable at Gains of 2 or Greater Full Power Bandwidth: 6. MHz for V p-p DC PERFORMAE
More informationHA MHz Video Buffer. Features. Applications. Ordering Information. Pinouts. Data Sheet February 6, 2006 FN2924.8
HA-533 Data Sheet February 6, 26 FN2924.8 25MHz Video Buffer The HA-533 is a unity gain monolithic IC designed for any application requiring a fast, wideband buffer. Featuring a bandwidth of 25MHz and
More informationUltra Low Input Bias Current INSTRUMENTATION AMPLIFIER
INA6 INA6 INA6 Ultra Low Input Bias Current INSTRUMENTATION AMPLIFIER FEATURES LOW INPUT BIAS CURRENT: fa typ BUFFERED GUARD DRIVE PINS LOW OFFSET VOLTAGE: mv max HIGH COMMON-MODE REJECTION: db () LOW
More informationFET-Input, Low Power INSTRUMENTATION AMPLIFIER
FET-Input, Low Power INSTRUMENTATION AMPLIFIER FEATURES LOW BIAS CURRENT: ±4pA LOW QUIESCENT CURRENT: ±4µA LOW INPUT OFFSET VOLTAGE: ±µv LOW INPUT OFFSET DRIFT: ±µv/ C LOW INPUT NOISE: nv/ Hz at f = khz
More informationVery Low Distortion, Precision Difference Amplifier AD8274
Very Low Distortion, Precision Difference Amplifier AD8274 FEATURES Very low distortion.2% THD + N (2 khz).% THD + N ( khz) Drives Ω loads Excellent gain accuracy.3% maximum gain error 2 ppm/ C maximum
More informationSGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
PRODUCT DESCRIPTION The SGM863 (single), SGM863 (dual), SGM8633 (single with shutdown) and SGM8634 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide
More informationPrecision G = 100 INSTRUMENTATION AMPLIFIER
Precision G = INSTRUMENTATION AMPLIFIER FEATURES LOW OFFSET VOLTAGE: 5µV max LOW DRIFT:.5µV/ C max LOW INPUT BIAS CURRENT: na max HIGH COMMON-MODE REJECTION: db min INPUT OVERVOLTAGE PROTECTION: ±V WIDE
More information60V High-Speed Precision Current-Sense Amplifier
EVALUATION KIT AVAILABLE MAX9643 General Description The MAX9643 is a high-speed 6V precision unidirectional current-sense amplifier ideal for a wide variety of power-supply control applications. Its high
More informationSGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
/2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into
More informationLow-Cost, High-Voltage, Internally Powered OUTPUT ISOLATION AMPLIFIER
Low-Cost, High-Voltage, Internally Powered OUTPUT ISOLATION AMPLIFIER FEATURES SELF-CONTAINED ISOLATED SIGNAL AND OUTPUT POWER SMALL PACKAGE SIZE: Double-Wide (.6") Sidebraze DIP CONTINUOUS AC BARRIER
More informationLM6118/LM6218 Fast Settling Dual Operational Amplifiers
Fast Settling Dual Operational Amplifiers General Description The LM6118/LM6218 are monolithic fast-settling unity-gain-compensated dual operational amplifiers with ±20 ma output drive capability. The
More informationQuad 12-Bit Digital-to-Analog Converter (Serial Interface)
Quad 1-Bit Digital-to-Analog Converter (Serial Interface) FEATURES COMPLETE QUAD DAC INCLUDES INTERNAL REFERENCES AND OUTPUT AMPLIFIERS GUARANTEED SPECIFICATIONS OVER TEMPERATURE GUARANTEED MONOTONIC OVER
More informationINA126. MicroPOWER INSTRUMENTATION AMPLIFIER Single and Dual Versions IN ) G V IN G = 5 +
INA6 INA6 INA6 INA6 INA6 INA6 INA6 SBOS06A JANUARY 996 REVISED AUGUST 005 MicroPOWER INSTRUMENTATION AMPLIFIER Single and Dual Versions FEATURES LOW QUIESCENT CURRENT: 75µA/chan. WIDE SUPPLY RANGE: ±.35V
More informationHA MHz, High Slew Rate, High Output Current Buffer. Description. Features. Applications. Ordering Information. Pinouts.
SEMICONDUCTOR HA-2 November 99 Features Voltage Gain...............................99 High Input Impedance.................... kω Low Output Impedance....................... Ω Very High Slew Rate....................
More information150 μv Maximum Offset Voltage Op Amp OP07D
5 μv Maximum Offset Voltage Op Amp OP7D FEATURES Low offset voltage: 5 µv max Input offset drift:.5 µv/ C max Low noise:.25 μv p-p High gain CMRR and PSRR: 5 db min Low supply current:. ma Wide supply
More informationFast-Settling FET-Input INSTRUMENTATION AMPLIFIER
INA Fast-Settling FET-Input INSTRUMENTATION AMPLIFIER FEATURES LOW BIAS CURRENT: pa max FAST SETTLING: 4µs to.% HIGH CMR: db min; db at khz INTERNAL GAINS:,,,, VERY LOW GAIN DRIFT: to ppm/ C LOW OFFSET
More informationSingle Supply, Rail to Rail Low Power FET-Input Op Amp AD820
a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from + V to + V Dual Supply Capability from. V to 8 V Excellent Load
More informationOBSOLETE. Parameter AD9621 AD9622 AD9623 AD9624 Units
a FEATURES MHz Small Signal Bandwidth MHz Large Signal BW ( V p-p) High Slew Rate: V/ s Low Distortion: db @ MHz Fast Settling: ns to.%. nv/ Hz Spectral Noise Density V Supply Operation Wideband Voltage
More information+10V Precision VOLTAGE REFERENCE
+1V Precision VOLTAGE REFEREE FEATURES OUTPUT VOLTAGE: +1V ±.% max EXCELLENT TEMPERATURE STABILITY: 8.ppm/ C max ( C to +8 C) LOW NOISE: µvp-p typ (.1Hz to 1Hz) EXCELLENT LINE REGULATION:.1%/V max EXCELLENT
More informationLow Cost, General Purpose High Speed JFET Amplifier AD825
a FEATURES High Speed 41 MHz, 3 db Bandwidth 125 V/ s Slew Rate 8 ns Settling Time Input Bias Current of 2 pa and Noise Current of 1 fa/ Hz Input Voltage Noise of 12 nv/ Hz Fully Specified Power Supplies:
More informationLF353 Wide Bandwidth Dual JFET Input Operational Amplifier
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
More informationPrecision Micropower Single Supply Operational Amplifier OP777
a FEATURES Low Offset Voltage: 1 V Max Low Input Bias Current: 1 na Max Single-Supply Operation: 2.7 V to 3 V Dual-Supply Operation: 1.35 V to 15 V Low Supply Current: 27 A/Amp Unity Gain Stable No Phase
More informationHigh Output Current Differential Driver AD815
a FEATURES Flexible Configuration Differential Input and Output Driver or Two Single-Ended Drivers Industrial Temperature Range High Output Power Thermally Enhanced SOIC 4 ma Minimum Output Drive/Amp,
More informationHigh Speed, Low Power Dual Op Amp AD827
a FEATURES HIGH SPEED 50 MHz Unity Gain Stable Operation 300 V/ s Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads EXCELLENT VIDEO PERFORMANCE 0.04% Differential Gain @ 4.4 MHz 0.19 Differential
More informationHigh Speed, Low Power Dual Op Amp AD827
a FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential
More informationSingle-Supply, 150MHz, 16-Bit Accurate, Ultra-Low Distortion Op Amps
9-; Rev ; /8 Single-Supply, 5MHz, 6-Bit Accurate, General Description The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 6- bit settling time in 3ns, and
More informationFeatures. Ordering Information. Part Identification
MIC9 MHz Low-Power SC-7 Op Amp General Description The MIC9 is a high-speed operational amplifier with a gain-bandwidth product of MHz. The part is unity gain stable. It has a very low.ma supply current,
More informationSingle Supply, Rail to Rail Low Power FET-Input Op Amp AD820
a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from V to V Dual Supply Capability from. V to 8 V Excellent Load Drive
More informationSON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS
PRODUCT DESCRIPTION The SON313 is designed for heart rate output with SON133(heart rate sensor) offering low cost. It has a wide input common mode voltage range and output voltage swing, and takes the
More informationHigh Precision OPERATIONAL AMPLIFIERS
OPA OPA OPA OPA OPA OPA OPA OPA OPA OPA OPA High Precision OPERATIONAL AMPLIFIERS SBOS09A MARCH 999 REVISED APRIL 00 FEATURES ULTRA LOW OFFSET VOLTAGE: 0µV ULTRA LOW DRIFT: ±0.µV/ C HIGH OPEN-LOOP GAIN:
More informationPrecision 4mA to 20mA CURRENT LOOP RECEIVER
Precision ma to 0mA CURRENT LOOP RECEIVER FEATURES COMPLETE -0mA TO 0-V CONVERSION INTERNAL SENSE RESISTORS PRECISION 0V REFERENCE BUILT-IN LEVEL-SHIFTING ±0V COMMON-MODE INPUT RANGE 0.% OVERALL CONVERSION
More informationPrecision, Low Power INSTRUMENTATION AMPLIFIERS
INA8 INA8 INA9 INA9 INA8 INA9 Precision, Low Power INSTRUMENTATION AMPLIFIERS FEATURES LOW OFFSET VOLTAGE: µv max LOW DRIFT:.µV/ C max LOW INPUT BIAS CURRENT: na max HIGH CMR: db min INPUTS PROTECTED TO
More informationIsolated, Unregulated DC/DC CONVERTERS
PWS75A PWS76A Isolated, Unregulated DC/DC CONVERTERS FEATURES ISOLATED ±7 TO ±8VDC OUTPUT FROM SINGLE 7 TO 8VDC SUPPLY ±ma OUTPUT AT RATED VOLTAGE ACCURACY HIGH ISOLATION VOLTAGE PWS75A, Vrms PWS76A, 35Vrms
More informationLF442 Dual Low Power JFET Input Operational Amplifier
LF442 Dual Low Power JFET Input Operational Amplifier General Description The LF442 dual low power operational amplifiers provide many of the same AC characteristics as the industry standard LM1458 while
More informationSingle Supply, Low Power Triple Video Amplifier AD813
a FEATURES Low Cost Three Video Amplifiers in One Package Optimized for Driving Cables in Video Systems Excellent Video Specifications (R L = 15 ) Gain Flatness.1 db to 5 MHz.3% Differential Gain Error.6
More informationTL082 Wide Bandwidth Dual JFET Input Operational Amplifier
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
More informationSGM8551XN Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier
PRODUCT DESCRIPTION The SGM8551XN is a single rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to
More informationHA-2520, HA-2522, HA-2525
HA-, HA-, HA- Data Sheet September 99 File Number 9. MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-// comprise a series of operational amplifiers delivering an unsurpassed
More informationLF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier
LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed
More informationADA485-/ADA485- TABLE OF CONTENTS Features... Applications... Pin Configurations... General Description... Revision History... Specifications... 3 Spe
NC NC NC NC 5 6 7 8 6 NC 4 PD 3 PD FEATURES Ultralow power-down current: 5 na/amplifier maximum Low quiescent current:.4 ma/amplifier High speed 75 MHz, 3 db bandwidth V/μs slew rate 85 ns settling time
More informationLM6172 Dual High Speed, Low Power, Low Distortion, Voltage Feedback Amplifiers
LM6172 Dual High Speed, Low Power, Low Distortion, Voltage Feedback Amplifiers General Description The LM6172 is a dual high speed voltage feedback amplifier. It is unity-gain stable and provides excellent
More informationCMOS 12-Bit Serial Input Multiplying DIGITAL-TO-ANALOG CONVERTER
CMOS 12-Bit Serial Input Multiplying DIGITAL-TO-ANALOG CONVERTER FEATURES 12-BICCURACY IN 8-PIN MINI-DIP AND 8-PIN SOIC FAST 3-WIRE SERIAL INTERFACE LOW INL AND DNL: ±1/2 LSB max GAIN ACCURACY TO ±1LSB
More informationQuad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V Max Offset Voltage V/ C Max Offset Voltage Drift 5 pa Max Input Bias Current.2 pa/ C Typical I B Drift Low Noise.5 V p-p Typical Noise,. Hz to Hz Low Power 6 A Max Supply
More informationPrecision 4mA to 20mA CURRENT LOOP RECEIVER
Precision ma to 0mA CURRENT LOOP RECEIVER FEATURES COMPLETE -0mA TO 0-V CONVERSION INTERNAL SENSE RESISTORS PRECISION 0V REFERENCE BUILT-IN LEVEL-SHIFTING ±0V COMMON-MODE INPUT RANGE 0.% OVERALL CONVERSION
More informationCLC440 High Speed, Low Power, Voltage Feedback Op Amp
CLC440 High Speed, Low Power, Voltage Feedback Op Amp General Description The CLC440 is a wideband, low power, voltage feedback op amp that offers 750MHz unity-gain bandwidth, 1500V/µs slew rate, and 90mA
More informationSerial Input 18-Bit Monolithic Audio DIGITAL-TO-ANALOG CONVERTER
Serial Input 8-Bit Monolithic Audio DIGITAL-TO-ANALOG CONVERTER FEATURES 8-BIT MONOLITHIC AUDIO D/A CONVERTER LOW MAX THD + N: 92dB Without External Adjust 00% PIN COMPATIBLE WITH INDUSTRY STD 6-BIT PCM56P
More informationCA3140, CA3140A. 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output. Description. Features. Applications. Ordering Information
November 99 SEMICONDUCTOR CA, CAA.MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output Features MOSFET Input Stage - Very High Input Impedance (Z IN ) -.TΩ (Typ) - Very Low Input Current (I
More information