SILLS, SWEEPS, ASTRAGALS & WEATHERSEALS FOR RESIDENTIAL DOOR APPLICATIONS. Weathersealing Specialists Since 1960

Transcription

1 Weathersealing Specialists Since 1960 SILLS, SWEEPS, ASTRAGALS & WEATHERSEALS FOR RESIDENTIAL DOOR APPLICATIONS REFER TO DRAFTSEAL COMMERCIAL CATALOGUE FOR COMMERCIAL DOOR COMPONENTS: THRESHOLDS & WEATHERSEALS DraftSeal Full Line Residential Catalogue Revision (3) June 20, 2018 PRINTED CATALOGUE MAY NOT BE UP TO DATE, ALWAYS REFER TO PRODUCT WEBSITE FOR MOST UP TO DATE CONTENT

2 ABOUT A.K. DRAFT SEAL LTD. & KRISTRACK Tomorrow s Innovative Solutions for Today s Doors & Windows Weathersealing Specialists Since Weatherstripping, Thresholds, Sweeps & Astragals Draft Seal Co. was founded in 1960 by Anton Kamensek then incorporated in 1973 as A.K. Draft Seal Ltd. During the 1990 s we became known by our trademark name DraftSeal, the largest manufacturer of weatherstrip products in Western Canada. After his retirement in the early nineties, his son, Chris, who had been with the company since 1973, purchased DraftSeal and started the Kristrack division. The year 2010 marked the 50th year in business for DraftSeal as a manufacturer and supplier of weathersealing and door sill products for commercial and residential applications. In 2013 we introduced our new DS1 Storm - Sill System to comply with the new building code that requires exterior door sill systems to be tested for air, water and structural. We will be introducing our new DSF1 Accordion Screen, which is integrated with our DS1 Storm - Sill System. Our manufacturing centre in Vancouver, B.C., Canada, produces a line of weatherstrip and sill products for the pre-hung door industry as well as a do-it-yourself line of residential weatherstripping for the consumer market. Interior Track And Hardware For Sliding, Bifold And Pocket Doors KrisTrack Manufacturing Ltd., was formed in 1991 to compliment the DraftSeal line of weathersealing and door sill products. KrisTrack manufactures and supplies sliding and bifold door track with accompanying hardware and accessories; applications include residential, commercial and industrial. The year 2016 marked the 25th year in business for KrisTrack. Our manufacturing centre in Vancouver, B.C., Canada, also produces a line of specialty pocket door frames custom made in knock down, half knock down, and ready-made styles. General Information & Terms This DraftSeal Catalogue supersedes all previous versions. Please visit for our full terms & conditions, freight, warranty, returns & allowances, claims policy, & other general information. Product drawings throughout this catalogue are representations of the product size, dimensions, shape, etc. Changes & updates to this catalogue may occur without notice. This may include, but not limited to, specifications, product availability & product materials. A.K. Draft Seal Ltd. will not be held liable for any changes to this catalogue, or products depicted in this catalogue that may not match our CAD drawings. A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. Written notice of damages must occur within the warranty period. Liability shall be limited to the replacement of product or component determined to be defective & shall not include costs arising from removal or reinstallation of product. Cost of replacement shall not exceed original purchase price. No other claims will be allowed. In no event shall liability be extended to include punitive, incidental or consequential damages arising from use of A.K. Draft Seal Ltd. products. This is the sole warranty given by A.K. Draft Seal Ltd. No other warranty implied or expressed shall be allowed. By purchasing our products you agree to our Terms & Conditions herein stated. 2 DraftSeal Product Catalogue Copyright DraftSeal

3 INDEX PRODUCT # PAGE # PRODUCT # PAGE # PRODUCT # PAGE # PRODUCT # PAGE # DSS11 48 DS DS DS , 31 DS12OAKE 30 DS DS DS DS12TVE 30 DS DS722 6 DS2111SGASKET 25, 26 DS14 41, 42 DS DS725BEAD 5, 11 DS DST27BL 33 DS420 5, 37 DS725BSP 10 DS2558SPC74 25, 26 DS DS421 5, 35 DS725 (SILL) 5, 6, 9, 10, 11 DS DSS66 48 DS DS725CAP 5 DS DS DS DS725CAPSL 11 DS DS DS DS725ECAPBL 5, 9 DS DS DS DS725GBLOCK3 11 DS DS DS DS725SGASKET 5, 6 DS DS DS433BL 38 DS725EXT3PLUG 3 DS2758CAPSL 10 DSS99 48 DS DS725FBCUPSET 5 DS2758SPC74 24, 26 DSP DS DS725INTC 5 DS DSP DS DS725SHIM 10 DS2858 (OAK) 27 DSP DS DS725SPC 5 DS2858 (PVC CAP) 24 DSPF DS DS725SLGG 11 DS2858SGASKET 24, 25 DS DS DS726HGASKET 5 DS DS DS DS750 5, 13 DS DS DS DS750SPC 5 DS5500SGASKET 16, 17 DS DS460SP 23 DS DS DS DS462PS 23, 47 DS764SPC 5 DS7500BSPBL 17 DS DSAP475BL 39 DS DS7500SGASKET 16, 17 DS DS492 8 DS DS7500WHCBL 5 DS DS496 8, 9 DS DS7501BSPBL 17 DS DSAP DS DS7501SGASKET 17 DS DS DS DS DS DS DS DS8500SGASKET 17, 18 DS DS DS DS DS DS DS DS10000SGASKET 17, 19 DS DS DS DS ROD 47 DSISSGASKET214 5, 6 DS DS DS TAPES 49 DS DS DS1051SGASKET 15 FANTOM DOOR STOP DS346KITCH 41, 45 DS DS DS DS670DS 47 DS1052SGASKET 15 DS DS DS DS346BOOT 45 DS692 7 DS DS346KITD 41, 45 DS696 5, 7 DS , 31 DS DS696SPC 5 DS DS2648 PVC protective tape, apply to any sill or threshold. Purchase by roll. 4 (101mm), 6 (154mm), 8 (203mm), 12 (304mm) widths. Copyright DraftSeal DraftSeal Product Catalogue 3

4 R R E E T T SYMBOLS Product Testing & Classification Symbols Symbols below & throughout this 2018 Catalogue are most up-to date & supersede all other information in print. The Symbols below are shown adjacent to products throughout the catalogue to help identify products that meet specific ratings and/or code requirements. The 2 actual adhesive backed labels shown below are adhered to each of our rated products. C O G N I Z E D C O M P O N N E ACTUAL PRODUCT LABEL (NOT TO SCALE) LISTED 1-1/2 HR. RATING Certified to: CAN/ULC S104 UL10(b) NFPA252 UL 1784 DOOR GASKETING/SEALS/THRESHOLDS ABOVE RATINGS APPLY TO SPECIFIC PRODUCTS, CHECK WEBSITE DO NOT COVER OR REMOVE THIS LABEL A.K. DRAFT SEAL LTD. BURNABY, B.C., CANADA V5J 4S5 Tested in accordance with CAN/ULC S104, ASTM E-152, CFSM 43.7, NFPA , UBC , UL 1784 (Formerly UBC ), UL 10(b) (2008). Listed for Canada & USA - Fire Rated Products indicated by this symbol are rated, listed & labelled as material for use on listed steel frames & listed swinging type fire doors of the hollow metal or steel covered composite type rated up to 1-1/2 hours. These products have been listed & labelled as a result of testing done by Warnock Hersey certifying that these products do not adversely affect the fire resistance of the door or frame. Products are regularly checked under the follow up factory inspection & certification service for manufacturing compliance with Warnock Hersey specifications. Contact A.K. Draft Seal Ltd. for further information. UL 10 (c) 2009 C O G N I Z E D C O M P O N N E Tested in accordance with UL 10(b) (2009) - Fire Tests of Door Assemblies, and CAN/ULC S Standard Method for Fire Tests of Door Assemblies. ACTUAL PRODUCT LABEL (NOT TO SCALE) LISTED 20 MIN. RATING Certified to: CAN/ULC S104 UL10(b) NFPA252 DOOR GASKETING/SEALS/THRESHOLDS ABOVE RATINGS APPLY TO SPECIFIC PRODUCTS, CHECK WEBSITE DO NOT COVER OR REMOVE THIS LABEL A.K. DRAFT SEAL LTD. BURNABY, B.C., CANADA V5J 4S5 Tested in accordance with CAN/ULC S104, ASTM E-152, CFSM 43.7, NFPA , UBC (Formerly UBC ), UL 10(b) (2008). Listed for Canada & USA - Fire Rated These products have been listed & labelled as a result of testing done by Warnock Hersey certifying that these products do not adversely affect the fire resistance of the door or frame. Products are regularly checked under the follow-up factory inspection & certification service for manufacturing compliance with Warnock Hersey specifications. Contact A.K. Draft Seal Ltd. for further information. Thresholds or sills for use with listed wood frames & listed swinging type doors of wood or steel faced construction, 20 minute rated. Gasketing material for use on listed wood or steel frames & listed swinging type fire doors of wood or steel faced construction, 20 minute rated. S Smoke Tested to UL: 1784 (2015). Meets requirements for NFPA 105. Products indicated by this symbol are listed by Intertek as having been tested in accordance with Standard UL 1784 Air leakage tests of door assemblies, and meet the performance criteria for allowable air leakage as specified in NFPA Installation of Smoke Control Door Assemblies. NAFS Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant Barrier Free Meets requirements of ADAAG & ICC / ANSI A Products indicated by this symbol are access compliant by having installed height differences not over 1/2 (12.7mm) with allowable edge & slope conditions. CLASSIFIED 28H7 28H7 UL10B & CAN4-S104-80M Classified, Complies with NFPA 80 & NFPA 252 for application to Steel fire doors rated up to 3 Hrs., & Wood type fire doors rated up to 90 minutes. (Rating on some items vary & are noted.) CLASSIFIED 28H7 CLASSIFIED 28H7 CLASSIFIED 28H7 Positive Pressure UL10C Classified, Category 'J ; complies with IBC, NFPA 80 & NFPA 252 for application to Positive Pressure Steel fire doors rated up to 3 Hrs., & Wood type fire doors rated up to 90 minutes. (Ratings on some items vary & are noted.) NGP-EDGE Sealing System, Category G classified; required for Category B classified wood type fire doors to meet positive pressure requirements complying with IBC, & NFPA 252. See individual products for maximum door size & ratings. Smoke & Draft Control Gasketing, Category H classified; complies with IBC, UL1784 & NFPA 105 for use on S labeled Positive Pressure Steel fire doors rated up to 3 hours, & wood type fire doors rated up to 90 minutes. (Ratings on some items vary & are noted.) Acoustical Tested to ASTM E90 standard test method for laboratory measurement of airborne sound transmission loss of building partitions & elements, & astm e1408 standard test method for laboratory measurement of the sound transmission loss of door panels & door systems. Air Infiltration Tested to ASTM E283, standard test method for determining rate of air leakage through exterior windows, curtain walls, & doors. Fire Rated 3 Hours Smoke Tested Air Infiltration Tested UL Rating 4 DraftSeal Product Catalogue Copyright DraftSeal

5 DS1 STORM - SILL SYSTEM, INSWING PRE-HUNG DOOR APPLICATION When Ordering DS1 Storm - Sill System, ELEVEN (11) Components Are Required To Assemble A Complete Sill: 1 PVC main cover cap & interior cover cap - included 7 Sill to jamb sealing gaskets - order separately 2 Main sill assembly (substrate / aluminum) with weep hole covers - included 8 Head jamb to side jamb gaskets - order separately 3 TPV Foam continuous cornering weatherseal - order separately 9 Strike plate and cup for double door- order separately 4 Aluminum sill bead - not included order separately 10 Protective PVC Sill Covers- order separately 5 Aluminum sill nose extensions: 1 (25.4mm), 2 (50.8mm), 3 (76.2mm) order separately 11 Interior substrate cover cap - included 6 Plastic sill nose extension end caps - order separately 1 Main cover cap pvc (snap-on) DS725CAPTVE150 tan DS725CAPBLVE150 black 150 (3810mm) length only 2 Main sill assembly: PVC substrate available in tan only. Aluminum sill available in 2 colours: mill finish (A) & bronze anodized (D) DS725AV /4 sill x 150 or DS696AV /16 sill x 150 or DS496AV /16 sill x 150 DS7500WHCBL Weep hole cover included with sill 3 Continuous cornering weatherseal (kerf slot inserted) 4 Sill bead (snap-in) 5 DS725BEADAE150 aluminum mill finish DS725BEADDE150 bronze anodized 150 (3810mm) length only Sill nose extensions Order separately Bead DS420BL500 black (6 fin) DS420BEIGE500 beige (6 fin) OR DS421BL Black DS421B Brown DS421W White Bead is cut shorter than sill to accomodate cornering kerf in gasket 2 (50.8mm) 1-5/16 (33mm) Warranty void if all sill noses are not secured to all DS1 Storm Sills as shown. 6 Sill nose extension end caps DS725ECAPBL 1 x left hand 1 x right hand, black only screw entry for attaching end cap to sill nose 7 Sill to jamb gasket (adhesive both sides) 8 Fits all DS1 Storm sills (inswing) with PVC cap. Trim to suit. 1-3/4 (45mm) DS725SGASKET 10-1/4 (261mm) Fits all DS1 Storm sills (inswing) with oak cap. Trim to suit. 1-3/4 (45mm) DSISSGASKET /4 (273mm) Head jamb to side jamb gasket DS726HGASKET fits up to 10" (254mm) jamb 1-7/32 (31mm) 10 (254mm) 9 Strike plate and cup for inswing or 10 outswing double doors using DS1 storm Protective PVC Sill Covers, 74" (1880mm) lengths 11 sills and astragals. DS725FBCUPSETB brown DS725FBCUPSETT tan DS725FBCUPSETW white DS696SPC74 fits DS850 & DS696 with 2" (51mm) nose DS725SPC74 fits DS725 with 2" (51mm) nose DS750SPC74 fits DS750 only DS764SPC74 fits all Storm Sills (covers interior portion of sill only) interior protective pvc cover exterior protective pvc cover Interior Substrate Cover Cap DS725INTCBLVE150 black DS725INTCTVE150 tan. 150 (3810mm) length only Protect this fantastic sill during home construction Copyright DraftSeal DraftSeal Product Catalogue ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL 5

6 DS1 STORM - SILL SYSTEM, INSWING PRE-HUNG DOOR APPLICATION 1-3/4 (45mm) 3/16 (4.7mm) PVC CAP (9.5mm) 5 slope 10-1/4 (261mm) DS725SGASKET 1-1/8 (28mm) 1-1/8 (29mm) ORDER NOSE SEPARATELY NAFS 6-1/16 (154mm) 9-1/4 (235mm) DS725AVBL Mill finish with PVC black cap DS725AVT Mill finish with PVC tan cap DS725DVBL Bronze anodized with PVC black cap DS725DVT Bronze anodized with tan cap 2 (50.8mm) DS725EXT Nose extension, 2" 1-3/4 (45mm) 3/16 (4.7mm) OAK CAP (9.5mm) 5 slope 10-3/4 (273mm) DSISSGASKET214 ORDER NOSE SEPARATELY 1-3/16 (31mm) 1-1/8 (29mm) 6-1/16 (154mm) 2 (50.8mm) 9-1/4 (235mm) DS725AOAK Mill finish with oak cap DS725DOAK Bronze anodized with oak cap DS725EXT Nose extension, 2" DS722 Application is used for 2-1/4" (57mm) door thickness 1-3/4 (45mm) 3/16 (4.7mm) 2-1/4 (57mm) (9.5mm) 5 slope 1-3/16 (31mm) 1-1/8 (29mm) OAK CAP 10-3/4 (273mm) DSISSGASKET214 ORDER NOSE SEPARATELY 6-9/16 (166.7mm) 2 (50.8mm) 9-3/4 (248mm) DS722A2OAK Mill finish with oak cap for 2-1/4" (57mm) door DS722D2OAK Bronze anodized with oak cap for 2-1/4" door DS725EXT Nose extension, 2" 6 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

7 DS1 STORM - SILL SYSTEM, INSWING PRE-HUNG DOOR APPLICATION 1-3/4 (45mm) 3/16 (4.7mm) 1-1/8 (29mm) PVC CAP (9.5mm) 5 slope ORDER NOSE SEPARATELY 10-1/4 (261mm) DS725SGASKET 1-1/8 (28mm) 6-1/16 (154mm) 8-9/16 (217mm) DS696AVBL Mill finish with PVC black cap DS696AVT Mill finish with PVC tan cap DS696DVBL Bronze anodized with PVC black cap DS696DVT Bronze anodized with PVC tan cap 2 (50.8mm) DS725EXT Nose extension, 2" 1-3/4 (45mm) 3/16 (4.7mm) OAK CAP (9.5mm) 5 slope ORDER NOSE SEPARATELY 10-3/4 (273mm) DSISSGASKET /16 (31mm) 1-1/8 (29mm) 6-1/16 (154mm) 8-9/16 (217mm) DS696AOAK Mill finish with oak cap DS696DOAK Bronze anodized with oak cap 2 (50.8mm) DS725EXT Nose extension, 2" DS692 Application is used for 2-1/4" (57mm) door thickness 1-3/4 (45mm) 3/16 (4.7mm) 2-1/4 (57mm) (9.5mm) 5 slope ORDER NOSE SEPARATELY 1-3/16 (31mm) 1-1/8 (29mm) OAK CAP 10-3/4 (273mm) DSISSGASKET /16 (166.7mm) 9-1/16 (230mm) DS692A2OAK Mill finish with oak cap for 2-1/4" (57mm) door DS692D2OAK Bronze anodized with oak cap for 2-1/4" door 2 (50.8mm) DS725EXT Nose extension, 2" Copyright DraftSeal DraftSeal Product Catalogue ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL 7

8 DS1 STORM - SILL SYSTEM, INSWING PRE-HUNG DOOR APPLICATION 1-3/4 (45mm) 5 slope 10-1/4 (261mm) DS725SGASKET 3/16 (4.7mm) 1-1/8 (28mm) PVC CAP (9.5mm) ORDER NOSE SEPARATELY 1- (35mm) 4-9/16 (116mm) DS496AVBL Mill finish with pvc cap black DS496AVT Mill finish with pvc cap tan DS496DVBL Bronze anodized with pvc cap black DS496DVT Bronze anodized with pvc cap tan 6-9/16 (166.7mm) 2 (50.8mm) DS725EXT Nose extension, 2" 1-3/4 (45mm) 3/16 (4.7mm) OAK CAP 1-3/16 (31mm) (9.5mm) 5 slope DSISSGASKET214 ORDER NOSE SEPARATELY 1- (35mm) 10-3/4 (273mm) 4-9/16 (116mm) DS496AOAK Mill finish with oak cap DS496DOAK Bronze anodized with pvc cap oak 6-9/16 (166.7mm) 2 (50.8mm) DS725EXT Nose extension, 2" DS492 Application is used for 2-1/4" (57mm) door thickness 2-1/4 (57mm) 5 slope 1-3/4 (45mm) DSISSGASKET /4 (273mm) 3/16 (4.7mm) 1-3/16 (31mm) OAK CAP (9.5mm) weep hole ORDER NOSE SEPARATELY 1- (35mm) 5-1/16 (128.5mm) 7-1/16 (179mm) DS492A2OAK150 Mill finish with oak cap for 2-1/4" (57mm) door DS492D2OAK150 Bronze anodized with oak cap for 2-1/4" (57mm) door 2 (50.8mm) DS725EXT Nose extension, 2" 8 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

9 DS1 STORM - SILL SYSTEM, SILL NOSE EXTENSIONS FOR INSWING PRE-HUNG DOOR APPLICATION Extension For DS696 & DS725 Extension For DS696 & DS /16 (33mm) 1-5/16 (33mm) 1 (25.4mm) DS725EXT-1AE173 mill finish, 173 (4393mm) length DS725EXT-1DE150 bronze anodized, 150 (3810mm) length Extension For DS696 & DS725 2 (50.8mm) Warranty void if all sill noses are not secured to all DS1 Storm sills as shown. DS725EXTAE169 mill finish, 169 (4293mm) length DS725EXTDE150 bronze anodized, 150 (3810mm) length 1-5/16 (33mm) weep hole 3 (76mm) DS725EXT-3A169 mill finish, 169 (4393mm) length DS725EXT-3D150 bronze anodized, 150 (3810mm) length DS725EXT3PLUG For DS725EXT-3 (3" / 76mm) nose. Apply silicon caulking around neoprene sill end plugs before inserting into end of sill nose extension. Extension For DS496 DS725EXT3PLUG 1-35/64 (39mm) 2 (50.8mm) DS496EXTAE169 mill finish, 169 (4293mm) length DS496EXTDE150 bronze anodized, 150 (3810mm) length DS725EXT3PLUG DS725EXT-3 (3" / 76mm) nose extension End caps for sill nose extensions left right DS725ECAPBL Fits DS725EXTAE (2" / 51mm nose extension) Fits DS496EXTAE (2" / 51mm nose extension) weep holes are only located at each end of the nosing through the end cap drain holes end cap drain hole Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 9

10 DS1 STORM - SILL SYSTEM, INSWING PRE-HUNG DOOR APPLICATION T-BAR COMPONENTS Base Support Platforms For Back To Back Jamb Mullions & T-Bar (Fits all DS1 Storm Sills, Inswing Applications) 2-31/64 (63mm) 7-1/4 (184mm) DS725BSPT714 tan 1-7/16 DS725BSPW714 white (36.5mm) DS725BSPBL714 black for 7-1/4 (184mm), 6-9/16" (167mm), 4-9/16" (116mm) back to back jamb mullions 1-5/16 (33mm) 2-31/64 (63mm) 3-9/16 (90mm) 1-7/16 (36.5mm) 1-5/16 (33mm) DS725BSPTTBAR tan DS725BSPWTBAR white DS725BSPBLTBAR black For standard T-bar 3-1/4 (82mm) 3-11/16 (94mm) 2-1/4 (57mm) 1-5/16 (33mm) DS725BSPT31116 tan DS725BSPW31116 white DS725BSPBL31116 black For large T-bar 3-11/16 (94mm) depth x 3-1/4 (83mm) example shown: 4-9/16 (116mm) T-bar Large T-Bar When using DS1051 or DS1052 sills in conjunction with T-Bar platform a plastic shim is required under front portion of platform DS725SHIM for large T-Bar platform NAFS When not using T-bar platform, bottom of t-bar may be notched to fit DS1051 as shown below (optional). Components for Sidelites, Outswing Doors 13/16 (21mm) IG unit 1/8 (3mm) 21/32 (9.6mm) 1-31/32 (50mm) 1-11/16 (43mm) 70 slope DS2758CAPSL Bottom sidelite platform pvc, 74 (1880mm) length only. Tan (TVE), & black (BLVE) 4 (101mm) 8 (203mm) 1- (35mm) 1/8 (3mm) sidelite panel 1/8 (3mm) 1-11/16 (43mm) 70 slope 70 slope 4 (101mm) 8 (203mm) 4 (101mm) 8 (203mm) 10 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

11 DS1 STORM - SILL SYSTEM, PRE-HUNG DOOR APPLICATION SIDELITE COMPONENTS DS1 Storm - Sill System Components for Side Lites (Inswing & Outswing Doors) 25/32 (20mm) 1-1/16 (27mm) DS725BEADIG Interior bottom snap-in bead pvc for 3/4 sidelite I.G. units, 74 (1880mm) length only. Tan (TVE) & black (BLVE) This profile as shown will accommodate 3/4 I.G. thickness. This lip to be reduced by 5/64 (2mm) so it can be used for 1 I.G. thickness 25/32 (20mm) 29/32 (23mm) DS725BEAD138 Interior bottom snap-in bead pvc for 1- sidelite I.G. triple glaze units, 74 (1880mm) length only. Tan (TVE) & black (BLVE) 25/32 (20mm) 7/8 (22.7mm) DS725BEAD175 Interior bottom snap-in bead pvc for 1-3/4 sidelite panel, 74 (1880mm) length only. Available in tan (TVE) & black (BLVE) (9.5mm) (9.5mm) 5/16 (7.9mm) 3/16 (4.7mm) DS864 neoprene closed DS861 neoprene closed cell sponge adhesive cell sponge adhesive backed. Order separately. backed. Order separately. DS1 Storm - Sill System Components for Side Lites (Inswing Doors) 13/32 (10.5mm) (9.8mm) 19/32 (15mm) 37/64 (14.7mm) DS725SLGG500BL 500 ft. (152.4m) roll DS725SLGG100BL 100 ft. (30.4m) roll Exterior glazing gasket, black only 63/64 (25mm) DS725GBLOCK3 Sidelite support block pvc, 3 (76mm) piece 1-13/32 (35.8mm) DS725CAPSL Bottom sidelite cover cap pvc, 74 (1880mm) length only. Tan (TVE), & black (BLVE) Direct glazing for 3/4 (19.05mm) I.G. unit (Actual: 4mm, 12.7mm spacer bar, 4mm) DS864 13/16 (20.7mm) IG unit Direct glazing for 1 (25.4mm) I.G. unit (Actual: 4mm, 15.8mm spacer bar, 4mm) DS861 15/16 (23.8mm) IG unit NAFS DS725GBLOCK3 PVC sidelite support platformv is not a continuous profile. It is supplied in 3 (76mm) pieces & support each end of the sidelite panel. Assembly for sidelite panel Direct glazing for 1- (35mm) I.G. triple glaze unit sidelite panel DS861 11/64 (4.5mm) 1- (35mm) Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 11

12 DS1 STORM - SILL SYSTEM (SG), INSWING PRE-HUNG DOOR APPLICATION (9.5mm) 3- (85mm) 5 slope 3/16 (5mm) 1-1/8 (28mm) PVC CAP 1-1/2 (37.4mm) 1-3/4 (45mm) 10-1/4 (261mm) DS725SGASKET 4-7/32 (107mm) 5-1/2 (140mm) DS550AVBL Mill finish with pvc cap black DS550AVT Mill finish with pvc cap tan DS550DVBL Bronze anodized with pvc cap black DS550DVT Bronze anodized with pvc cap tan (9.5mm) 3- (85mm) 5 slope 3/16 (4.7mm) OAK CAP 1-3/16 (31mm) 1-1/2 (37.4mm) 1-3/4 (45mm) DSISSGASKET /4 (273mm) 4-7/32 (107mm) 5-1/2 (140mm) DS550AOAK Mill finish with oak cap DS550DOAK Bronze anodized with oak cap DS552 Application is used for 2-1/4" (57mm) door thickness (9.5mm) 3- (85mm) 2-1/4 (57mm) 5 slope 3/16 (4.7mm) 1-3/16 (31mm) OAK CAP 1-1/2 (37.4mm) 4-7/32 (120mm) 6 (152mm) DS552A2OAK Mill finish with oak cap for 2-1/4" (57mm) door thickness DS552D2OAK Bronze anodized with oak cap for 2-1/4" (57mm) door thickness 1-3/4 (45mm) DSISSGASKET /4 (273mm) 12 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

13 DS1 STORM - SILL SYSTEM (SG), INSWING PRE-HUNG DOOR APPLICATION Oak cap for 1-3/4" (44.45mm) door thickness Oak cap for 2-1/4" (57mm) door thickness 1-3/4 (45mm) 1-3/4 (45mm) 1-3/4 (45mm) 10-3/4 (273mm) DSISSGASKET /4 (261mm) DS725SGASKET 5- (136mm) 5 slope (9.5mm) 3/16 (5mm) 1-5/16 (33mm) PVC CAP 1-1/8 (28mm) 6-1/16 (154mm) 7-1/2 (190.5mm) NAFS DS750AVBL Mill finish with pvc cap black DS750DVBL Bronze anodized with pvc cap black DS750AVT Mill finish with pvc cap tan DS750DVT Bronze anodized with pvc cap tan 10-3/4 (273mm) DSISSGASKET (136mm) 5 slope 3/16 (4.7mm) (9.5mm) OAK CAP 1-5/16 (33mm) 1-3/16 (31mm) 6-1/16 (154mm) 7-1/2 (190.5mm) DS750AOAK Mill finish with oak cap DS750DOAK Bronze anodized with oak cap DS752 Application is used for 2-1/4" (57mm) door thickness 5- (136mm) 2-1/4 (57mm) 5 slope 3/16 (4.7mm) (9.5mm) 1-5/16 (33mm) OAK CAP 1-3/16 (31mm) 6-9/16 (166.5mm) 8 (203mm) DS752A2OAK Mill finish with oak cap for 2-1/4" (57mm) door DS752D2OAK Bronze anodized with oak cap for 2-1/4" (57mm) door Copyright DraftSeal DraftSeal Product Catalogue 13 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL

14 NEW INSWING SILLS, PRE-HUNG DOOR APPLICATION 1-3/4 (45mm) 1-3/4 (45mm) 1-3/4 (45mm) 10-1/4 (261mm) DS725SGASKET DSISSGASKET /4 (273mm) DSISSGASKET /4 (273mm) 1-3/16 (31mm) 6- (161.4mm) 5 slope 3/16 (5mm) (9.5mm) 1-1/8 (28mm) 1-3/16 (31mm) 6-1/16 (154mm) 8-1/2 (216mm) 6- (161.4mm) 3/16 (4.7mm) (9.5mm) 5 slope 1-3/16 (31mm) 1-3/16 (31mm) PVC CAP DS850AVBL Mill finish with pvc cap black DS850DVBL Bronze anodized with pvc cap black DS850AVT Mill finish with pvc cap tan DS850DVT Bronze anodized with pvc cap tan NAFS OAK CAP 6-1/16 (154mm) 8-1/2 (216mm) DS850AOAK Mill finish with oak cap DS850DOAK Bronze anodized with oak cap DS852 Application is used for 2-1/4" (57mm) door thickness 2-1/4 (57mm) 6- (161.4mm) 3/16 (4.7mm) (9.5mm) 5 slope OAK CAP 1-3/16 (31mm) 6-17/32 (166mm) 9 (228mm) DS852A2OAK Mill finish with oak cap for 2-1/4" (57mm) door DS852D2OAK Bronze anodized with oak cap for 2-1/4" (57mm) door 14 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

15 NEW INSWING SILLS, PRE-HUNG DOOR APPLICATION 1-3/4 (45mm) 9.2 slope 7-7/8 (200mm) 10 (254mm) DS1051SGASKET 3/16 (5mm) (9.5mm) PVC CAP 6-1/16 (154mm) 10 (254mm) 1/2 (12.6mm) 1-1/8 (28mm) DS1051AVBL Mill finish with pvc cap black DS1051DVBL Bronze anodized with pvc cap black DS1051AVT Mill finish with pvc cap tan DS1051DVT Bronze anodized with pvc cap tan 1-3/4 (45mm) 9.2 slope 7-7/8 (200mm) 10-1/2 (266mm) DS1052SGASKET 3/16 (4.7mm) OAK CAP (9.5mm) 6-1/16 (154mm) 10 (254mm) 1/2 (12.6mm) 1-3/16 (31mm) PVC CAP DS1051AOAK Mill finish with oak cap DS1051DOAK Bronze anodized with oak cap DS1052 Application is used for 2-1/4" (57mm) door thickness 2-1/4 (57mm) 9.2 slope 7-7/8 (200mm) 1-3/4 (45mm) 10-1/2 (266mm) DS1052SGASKET 3/16 (4.7mm) (9.5mm) OAK CAP 6-17/32 (166mm) 10-1/2 (266mm) Oak cap for 1-3/4" (44.45mm) door thickness Oak cap for 2-1/4" (57mm) door thickness 1/2 (12.6mm) 1-3/16 (31mm) DS1052A2OAK Mill finish with oak cap for 2-1/4" (57mm) door DS1052D2OAK Bronze anodized with oak cap for 2-1/4" (57mm) door NAFS Copyright DraftSeal DraftSeal Product Catalogue 15 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL

16 INSWING SILL PRE-HUNG DOOR APPLICATIONS 3- (85.7mm) 1-49/64 (45mm) PVC CAP 1-3/4 (44.5mm) 7 slope (9.5mm) weep hole 11 slope DS5500SGASKETL Left weep hole door DS5500SGASKETR Right 5-1/2 (139.7mm) DS5500AVT Mill finish with pvc tan cap DS5500AVBL Mill finish with pvc black cap DS5500DVBL Bronze anodized with pvc black cap 3- (85.7mm) 1-49/64 (44.8mm) OAK CAP 1-47/64 (44mm) 7 slope 25/64 (10mm) weep hole 11 slope DS5500SGASKETL Left weep hole door DS5500SGASKETR Right DS5500AOAK Mill finish with oak cap 5-1/2 (139.7mm) DS5500DOAK Bronze anodized with oak cap 5- (136.5mm) DS7500SGASKETL Left 1-49/64 (45mm) PVC CAP 1-3/4 (44.5mm) 7 slope (9.5mm) weep hole 11 slope weep hole DS7500SGASKETR Right weep hole door NAFS 7-1/2 (190.5mm) DS7500AVT Mill finish with pvc tan cap DS7500AVBL Mill finish with pvc black cap DS7500DVBL Bronze anodized with pvc black cap 5- (136.5mm) DS7500SGASKETL Left 1-49/64 (45mm) OAK CAP 7 slope 25/64 (10mm) weep hole 11 slope weep hole DS7500SGASKETR Right weep hole door DS7500AOAK Mill finish with oak cap 7-1/2 (190.5mm) DS7500DOAK Bronze anodized with oak cap 16 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

17 BASE SUPPORT PLATFORMS BSP FOR T-BAR DS7500BSPBL Black Gasket trim to fit DS7501BSPBL Black DS7501SGASKET DS7501SGASKET SILL GASKET R SILL GASKET L Left or Right gaskets determined when viewing from intierior side DS5500SGASKETL DS5500SGASKETR DS7500SGASKETL DS7500SGASKETR DS8500SGASKETL DS8500SGASKETR DS10000SGASKETL DS10000SGASKETR Left gasket for DS5500 sills Right gasket for DS5500 sills Left gasket for DS7500 sills Right gasket for DS7500 sills Left gasket for DS8500 sills Right gasket for DS8500 sills Left gasket for DS10000 sills Right gasket for DS10000 sills Copyright DraftSeal DraftSeal Product Catalogue ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL 17

18 INSWING SILL PRE-HUNG DOOR APPLICATIONS PVC CAP 1-3/4 (44.5mm) 7 slope (9.5mm) DS8500AVT Mill finish with pvc cap tan DS8500AVBL Mill finish with pvc cap black DS8500DVBL Bronze anodized with pvc cap black 1-47/64 (44mm) 7 slope 25/64 (10mm) OAK CAP DS8500AOAK Mill finish with oak cap DS8500DOAK Bronze anodized with oak cap 8-1/2 (216mm) 8-1/2 (216mm) 6- (162mm) 6- (162mm) 11 slope 11 slope weep hole door weep hole door DS8500SGASKETL Left DS8500SGASKETR Right DS8500SGASKETL Left DS8500SGASKETR Right 1-49/64 (45mm) 1-49/64 (45mm) 18 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

19 INSWING SILL PRE-HUNG DOOR APPLICATIONS PVC CAP 1-47/64 (44mm) 7 slope 25/64 (10mm) DS10000AVT Mill finish with pvc cap tan DS10000AVBL Mill finish with pvc cap black DS10000D VBL Bronze anodized with pvc cap black 1-47/64 (44mm) 7 slope 25/64 (10mm) OAK CAP DS10000AOAK Mill finish with oak cap DS10000DOAK Bronze anodized with oak cap 10 (254mm) DS10000SGASKETL Left 10 (254mm) DS10000SGASKETL Left 7-7/8 (200mm) 7-7/8 (200mm) 8.8 slope DS10000SGASKETR Right 8.8 slope DS10000SGASKETR Right weep hole door weep hole door 1-49/64 (45mm) 1-49/64 (45mm) Copyright DraftSeal DraftSeal Product Catalogue 19 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL

20 INSWING SILL PRE-HUNG DOOR APPLICATIONS 1-11/16 (43mm) fixed PVC cap weep hole weep hole wood substrate 5º slope 13/16 (21mm) DS459GASKET DS459AVBL DS459AVT DS459AVW DS459DVBL DS459DVT DS459DVW 4-13/16 (122mm) Extruded aluminum sill, mill finish with wood substrate & fixed PVC cap, black Extruded aluminum sill, mill finish with wood substrate & fixed PVC cap, tan Extruded aluminum sill, mill finish with wood substrate & fixed PVC cap, white Bronze anodized with fixed PVC cap, black Bronze anodized with fixed PVC cap, tan Bronze anodized with fixed PVC cap, white 1-25/32 (45.2mm) RECOGNIZED COMPONENT 1-1/2 HR. RATING weep hole DS228B PVC brown. Lengths available: 36, 48 DS228W PVC white. 31-3/4, 32, 33-3/4, 35-3/4, 36, 48" fixed PVC cap 1-11/16 (43mm) weep hole weep hole wood substrate wood substrate 5º slope 5/8 (16mm) 6-25/32 (172mm) DS659AVBL DS659AVT DS659AVW DS659DVBL DS659DVT DS659DVW Extruded aluminum mill finish with wood substrate & fixed PVC cap, black Extruded aluminum mill finish with wood substrate & fixed PVC cap, tan Extruded aluminum sill, mill finish wood substrate & with fixed PVC cap, white Bronze anodized with fixed PVC cap, black Bronze anodized with fixed PVC cap, tan Bronze anodized with fixed PVC cap, white DS659GASKET 20 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

21 INSWING SILL PRE-HUNG DOOR APPLICATIONS Sill Extensions for DS459, DS659, DS457 & DS657, DS /64 (160mm) 8-21/32 (220mm) DS459 Sill shown with DS1112, 1-1/2 (38mm) extension DS659 Sill shown with DS1112, 1-1/2 (38mm) extension 1-11/16 (43mm) Adding sill horns has now been made easy: No more notching. 6-13/16 (173mm) DS457 Sill shown with DS1122, 2 (51mm) extension Sill extension eliminates the time consuming notching on regular sill. Snap & screw sill extension to sill. You choose the length of the sill horns. DS1112A150 DS1112D /2 (38mm) Extruded aluminum mill finish. Length available: 150 (3810mm) only Bronze anodized DS1122A150 DS1122D150 2 (51mm) Extruded aluminum mill finish. Length available: 150 (3810mm) only Bronze anodized 3 (76mm) DS1113A150 Extruded aluminum mill finish. Length available: 150 (3810mm) only DS1113D150 Bronze anodized 4 (102mm) DS1114A150 Extruded aluminum mill finish. Length available: 150 (3810mm) only DS1114D150 Bronze anodized DS1115A150 DS1115D150 5 (127mm) Extruded aluminum mill finish. Length available: 150 (3810mm) only Bronze anodized Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 21

22 OUTSWING SILL, PRE-HUNG DOOR APPLICATIONS 13/16 (21mm) 5º slope DS421 Kerf insert not included with sill, order separately DS /32 (61mm) PVC CAP 1-11/16 (43mm) DS457AVW DS457AVT DS457AVBL DS457DVW DS457DVT DS457DVBL 4-3/4 (121mm) Extruded aluminum sill, mill finish with interior fixed PVC cap, white Mill finish with PVC tan cap Mill finish with PVC black cap Bronze anodized with PVC white cap Bronze anodized with PVC tan cap Bronze anodized with PVC black cap DS457GASKET 4-13/32 (112mm) PVC CAP 5º slope DS /16 (43mm) DS657AVW DS657AVT DS657AVBL DS657DVW DS657DVT DS657DVBL 6-23/32 (171mm) Extruded aluminum sill, mill finish with interior fixed PVC cap, white Mill finish with PVC tan cap Mill finish with PVC black cap Bronze anodized with PVC white cap Bronze anodized with PVC tan cap Bronze anodized with PVC black cap DS657GASKET 22 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

23 SILL PLATFORM & SEAL FOR DS459 & DS659 SILLS Pile seal (supplied) between platform & bottom of astragal DS462PS Adhesive backed pile, seals between bottom of astragal and platform Caulk under platform to prevent water leakage through mounting hole DS460SP DS460SP Kit includes: 2 platfroms: 1 left, 1 right 2 pile seals: 1 left, 1 right plus fastening screws Pile seals may be purchased separately DS462PS 2 pile seals: 1 left, 1 right Copyright DraftSeal DraftSeal Product Catalogue 23 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL

24 OUTSWING SILL, MILLENIUM SERIES 3-19/32 (91.5mm) 5 (127mm) Kerf insert not included with sill. Order separately. DS421 7 slope WOOD PLUGS 8-19/32 (218.5mm) DS2858AVT150 Extruded aluminum sill mill finish with PVC interior cap tan & 3 wood inserts. 150 (3810mm) length. DS2858AVBL150 Extruded aluminum sill mill finish with PVC interior cap black & 1 wood insert. 150 (3810mm) length. DS2858DVBL150 Extruded aluminum sill, bronze anodized with PVC interior cap black & 3 wood inserts. 150 (3810mm) length. DS2858DVT150 Extruded aluminum sill, bronze anodized with PVC interior cap tan & 3 wood inserts. 150 (3810mm) length. Extruded PVC interior sill 3-19/32 (91.5mm) Kerf insert not included with sill. Order separately. 7 slope DS421 WOOD PLUGS 4-13/32 (112mm) 8 (203.4mm) 1-11/16 (43mm) COMPONENT RECOGNIZED DS2758AVT150 Extruded aluminum sill mill finish with PVC interior cap tan & 2 wood inserts. 150 (3810mm) length. DS2758AVBL150 Extruded aluminum sill mill finish with PVC interior cap black & 1 wood insert. 150 (3810mm) length. DS2758DVBL150 Extruded aluminum sill, bronze anodized with PVC interior cap black & 2 wood inserts. 150 (3810mm) length. DS2758DVT150 Extruded aluminum sill, bronze anodized with PVC interior cap tan & 2 wood inserts. 150 (3810mm) length. 1-11/16 (43mm) DS2858GASKET 4-1/2 (116mm) DS2758SPC Protective cover for sill, order separately 1-23/32 (43.5mm) NAFS DS2858GASKET 24 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

25 OUTSWING SILL, MILLENIUM SERIES 3-19/32 (91.5mm) Kerf insert not included with sill. Order separately. 7 slope DS /32 (61mm) 2-1/2 (65mm) DS2558SPC74 Protective cover for sill, Order separately 1-11/16 (43mm) 1-23/32 (43.5mm) DS2858GASKET gasket under cup rim included Flushbolt pin 6 (152.6mm) DS2558AVT150 Extruded aluminum sill mill finish with PVC interior cap tan & 1 wood insert. 150 (3810mm) length. DS2558AVBL150 Extruded aluminum sill mill finish with PVC interior cap black & 1 wood insert. 150 (3810mm) DS2558DVBL150 Extruded aluminum sill, bronze anodized with PVC interior cap black & 1 wood insert. 150 (3810mm) length. DS2558DVT150 Extruded aluminum sill, bronze anodized with PVC interior cap tan & 1 wood insert. 150 (3810mm) length. DS2636 Flushbolt cup for DS2858, DS2758, DS2558 DS2637 Gasket for DS2636 cup, fits under rim Sills DS2858, DS2758, DS2558 require notching (by prehanger) for the optional DS420 continuous cornering weatherseal 3-19/32 (91mm) Kerf insert not included with sill. Order separately. 7 slope DS421 WOOD PLUGS 6-37/64 (167mm) 1-11/16 (43mm) 10-1/8 (258mm) DS1014AVT150 Extruded aluminum sill mill finish with PVC interior cap tan & 1 wood insert. 150 (3810mm) length. DS1014AVBL150 Extruded aluminum sill mill finish with PVC interior cap black & 1 wood insert. 150 (3810mm) DS1014DVBL150 Extruded aluminum sill, bronze anodized with PVC interior cap black & 1 wood insert. 150 (3810mm) length. DS2111SGASKET Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 25

26 DS1 STORM - SILL SYSTEM, MILLENIUM SERIES OAK CAP OUTSWING, PRE-HUNG 2-1/2 (65mm) For 4-9/16 (116mm) Jamb 4-9/16 (116mm) 1-23/32 (43.5mm) DS2558SPC74 Protective cover for sill, Order separately 2-13/32 (61mm) 3-1/2 (89mm) 2-1/8 (54mm) OAK CAP jamb 1-11/16 (43mm) DS421 3 slope DS2111SGASKET 5-7/8 (149mm) DS2578AOAK150 Mill finish, 150 (3810mm) length DS2578DOAK150 Bronze anodized, 150 (3810mm) length 4-1/2 (116mm) DS2758SPC Protective cover for sill, Order separately 1-23/32 (43.5mm) For 6-9/16 (167mm) Jamb 6-9/16 (167mm) 4-13/32 (112mm) 3-1/2 (89mm) 2-1/8 (54mm) OAK CAP jamb DS421 NAFS 1-11/16 (43mm) 3 slope 7-7/8 (200mm) DS2778AOAK150 Mill finish, 150 (3810mm) length DS2778DOAK150 Bronze anodized, 150 (3810mm) length»» Extruded aluminum sill with 5º slope»» Kerf inserted continuous cornering weatherseal (DS420 optional) not included with sills. Order separately Sills DS2858, DS2758, DS2778 & DS2912 require notching (by prehanger) for the optional DS420 continuous cornering weatherseal»» Single or double door application DS2111SGASKET 26 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

27 DS1 STORM - SILL SYSTEM, MILLENIUM SERIES OAK CAP OUTSWING, PRE-HUNG 1-11/16 (43mm) For 7-1/4 (184mm) Jamb 3-1/2 (89mm) 2-1/8 (54mm) 7-1/4 (184mm) 5-3/32 (129mm) OAK CAP jamb DS421 3 slope 8-5/8 (219mm) DS2858AOAK150 Mill finish, 150 (3810mm) length DS2858DOAK150 Bronze anodized, 150 (3810mm) length DS2111SGASKET For 8-1/8 (206mm) Jamb 3-1/2 (89mm) jamb 2-1/8 (54mm) DS /8 (206mm) 6 (152mm) OAK CAP 3 slope 9-1/2 (241mm) DS2912AOAK150 Mill finish, 150 (3810mm) length DS2912DOAK150 Bronze anodized, 150 (3810mm) length DS2111SGASKET 1-11/16 (43mm) Rip to suit custom jamb size Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 27

28 DS1 STORM - SILL SYSTEM, MILLENIUM SERIES OAK TOP OUTSWING, PRE-HUNG 1-11/16 (43mm) 1-11/16 (43mm) For 8-3/4 (222mm) Jamb 3-1/2 (89mm) 2-1/8 (54mm) jamb DS /8 (168.3mm) 8-3/4 (222mm) OAK CAP 3 slope 10-1/8 (257.4mm) DS1018AOAK150 Extruded aluminum sill, mill finish with oak cap, 10-1/8" (257mm) x 150" (3810mm) length. DS1018DOAK150 Extruded aluminum sill, bronze anodized with oak cap, 10-1/8" (257mm) x 150" (3810mm) length. Rip to suit custom jamb size DS2111SGASKET 3-1/2 (89mm) 8-3/4 (222mm) 7-1/2 (190.3mm) For 9" (229mm) Jamb jamb 2-1/8 (54mm) DS421 OAK CAP 3 slope 11 (279.4mm) Rip to suit custom jamb size DS2111AOAK150 Extruded aluminum sill, mill finish with oak cap, 11" (279mm) x 150" (3810mm) length. DS2111DOAK150 Extruded aluminum sill, bronze anodized with oak cap, 11" (279mm) x 150" (3810mm) length. DS2111SGASKET 28 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

29 OUTSWING SILL, LOW RISE, PRE-HUNG DOOR APPLICATIONS 3 slope Kerf insert not included with sill, order separately DS /32 (61mm) OAK CAP 1- (34mm) 5-7/8 (149mm) 3 slope Kerf insert not included with sill, order separately DS /32 (112mm) 7-7/8 (200mm) DS778AOAK Extruded aluminum sill, mill finish with interior oak cap. Length available: 150 (3810mm) only DS778DOAK Bronze anodized with interior oak cap. Length available: 150 (3810mm) only 1- (34mm) COMPONENT RECOGNIZED DS578AOAK Extruded aluminum sill mill finish with interior oak cap. Length available: 150 (3810mm) only DS578DOAK Bronze anodized with interior oak cap. Length available: 150 (3810mm) only OAK CAP DS2111SGASKET DS2111SGASKET COMPONENT RECOGNIZED Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 29

30 INSWING SILL, PRE-HUNG DOOR APPLICATIONS DS712SPC Rigid PVC sill protector cover for DS712 series inswing sill. Not included with sill, order separately. 1- (35mm) 5º slope 5- (137mm) DS512AOAK Extruded aluminum sill mill finish with fixed oak cap DS512DOAK Bronze anodized with fixed oak cap RECOGNIZED COMPONENT Replacement Oak Cap 1-3/4 (44.45mm) 5/16 (8mm) DS12OAKE109 Oak, 109 (2769mm) (37mm) 5- (137mm) 5º slope DS512AVT Extruded aluminum sill, mill finish with fixed vinyl cap, tan. DS512DVBL Bronze anodized with fixed PVC cap, black. RECOGNIZED COMPONENT Replacement PVC Cap 1-3/4 (44.45mm) DS12TVE109 DS12BLVE109 7/16 (11mm) Tan, 109 (2769mm) Black, 109 (2769mm) 1- (35mm) 6-7/16 (164mm) 5º slope DS612AOAK Extruded aluminum sill, mill finish with fixed oak cap DS612DOAK Bronze anodized with fixed oak cap RECOGNIZED COMPONENT 1-7/16 (37mm) 6-7/16 (164mm) 5º slope DS612AVT Extruded aluminum sill, mill finish with fixed PVC cap, tan. DS612DVBL Bronze anodized with fixed PVC cap, black. Length available: 109 (2769mm) RECOGNIZED COMPONENT 1- (35mm) 5º slope 7- (187mm) DS712AOAK Extruded aluminum sill, mill finish with fixed oak cap DS712DOAK Bronze anodized with fixed oak cap RECOGNIZED COMPONENT 1-7/16 (37mm) 5º slope 7- (187mm) DS712AVBL Mill finish with pvc cap black. DS712AVT Extruded aluminum sill, mill finish with fixed PVC cap, tan. DS712DVBL Bronze anodized with fixed PVC cap, black. RECOGNIZED COMPONENT 1- (35mm) 8-1/2 (216 mm) DS812AOAK Extruded aluminum sill, mill finish with fixed oak cap. DS812DOAK Bronze anodized with fixed oak cap. RECOGNIZED 5º slope 5º slope COMPONENT 1-7/16 (37mm) 8-1/2 (216mm) DS812AVT Extruded aluminum sill, mill finish with fixed PVC cap, tan. DS812DVBL Bronze anodized with fixed PVC cap, black. RECOGNIZED COMPONENT 30 ALL DRAWINGS. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

31 INSWING SILL, PRE-HUNG DOOR APPLICATIONS 7 Sill Extensions Available COMPONENT RECOGNIZED 5º slope 8-1/2 (216mm) DS814AOAK Extruded aluminum sill, mill finish with fixed oak cap. Length available: 108 (2743mm) only DS814DOAK Bronze anodized with fixed oak cap. COMPONENT RECOGNIZED 1- (35mm) 1-7/16 (37mm) 1- (35mm) 5º slope 8-1/2 (216mm) DS814AVT Extruded aluminum sill, mill finish with fixed PVC cap, tan. Length available: 108 (2743mm) only DS814DVBL Bronze anodized with fixed PVC cap, black. 4 (102mm) DS1114 Sill extension, mill finish or bronze anodized. 150" length only HALF SCALE DS1122 extension (not attached) 10-1/2 (267mm) 2 (51mm) DS1122A150 Extruded aluminum mill finish. Length available: 150 (3810mm) only DS1122D150 Bronze anodized Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 31

32 INSWING SILL, PRE-HUNG DOOR APPLICATIONS COMPONENT RECOGNIZED COMPONENT RECOGNIZED 5-5/16 (135mm) DS538AVT Extruded aluminum sill, mill finish with fixed PVC cap, tan DS738AVT Extruded aluminum sill, mill finish with fixed PVC cap, tan 7- (187mm) 4º slope 4º slope 1-5/16 (33mm) 1-5/16 (33mm) 32 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

33 DOOR SHOES (PVC) For Fixed Oak Or PVC Cap Inswing or Outsing Sills 1-3/4 (44.45mm) 1-7/16 (37mm) Rain drip is notched for stop 1-7/8 (48mm) 1-25/32 (45.2mm) 1-3/4 (44.45mm) 1- (35mm) DS127B PVC brown. 36, 48 DS127W PVC white. 36, 48 DS128BL PVC black. 36, 48 DS128B PVC brown. 36, 48 DS128W PVC white. 31-3/4, 32, 35-3/4, 36, 48 DS129W36 PVC white /32 (44mm) 1-1/4 (32mm) rain drip notched each end for door stop 1-27/32 (46.8mm) 1-5/8 (41mm) 1-27/32 (46.8mm) DS125B PVC brown. Lengths available: 36, 48 DS125W PVC white. 36, 48 DS124BL PVC black. 36, 48 DS124B PVC brown. 36, 48 DS124W PVC white. 31-3/4, 32, 35-3/4, 36, 48 For Millennium Series Outswing Sill sloped for 7º door sill DST27BL Replacement santoprene inset. Use bulb seal in door shoe for outswing sill DS2702B PVC brown. Length available: 36 only application. DS2702W PVC white. Length available: 36 only Use DS2702 door shoe with DS2558, DS2758, DS2858 & DS /32 (45.2mm) weep hole DS228B PVC brown. Lengths available: 36, 48 DS228W PVC white. 31-3/4, 32, 33-3/4, 35-3/4, 36, 48" Use DS228 door shoe with DS459 and DS659 sills RECOGNIZED COMPONENT 1-1/2 HR. RATING Inches to millimeters 31-5/8" (803mm) / 31-3/4" (806mm) / 31-7/8" (810mm) / 34" (864mm) / 35-5/8" (905mm) / 35-7/8" (911mm) / 36" (914mm) / 48" (1219mm) Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 33

34 RETROFIT DOOR WEATHERSEALING Superior Plus Weathersealing Door Kit E-Lon /32 (.650") (17mm) DS422 (9.5mm) 9/16 (14.2mm) 7/8 (22mm) 1-17/32 (39mm) DS422B Extruded aluminum painted brown with gasket insert, brown DS422C Clear anodized with black gasket insert DS422W Painted white with white gasket insert Available in sets of 1/36 x 2/81 (914 x 2057mm) single door set 1/36 x 2/84 (914 x 2134mm) single door set 1/81 x 2/84 (2057 x 2134mm) double door set DS422 Extruded aluminum painted brown or white, with matching brown or white foam-tight compression gasket. Also available clear anodized extrusion with black foam-tight compression gasket. Advantages Of Foam-Tight Kerf Gasket Closed cell foam structure: high resistance to water absorption & eliminates wicking. Seamless elastomeric skin: provides long life, resilience, & durability. Puncture & tear resistant, outlasts & outperforms all other replacement weathersealing. Superior resistance to compression set: operating forces remain constant over a wide compression range, helping doors exceed all industry requirements. Performance: independent tests have shown foam-tight performs like new under all temperature. Punched/slotted holes. Plated screws supplied with white sets. Antique bronze plated screws supplied with brown sets. Foam-Tight gasket easily replaceable, pull out the old & push in the new. Weathersealing Door Kit (Long Reach) 59/64 (23mm) (9.5mm) 5/8 (16mm) 55/64 (22mm) 1-25/32 (45.3mm) DS432B17 Painted brown with black gasket, 1/36 x 2/84 (914 x 2134mm) single door set DS432C17 Clear anodized with black gasket, 1/36 x 2/84 (914 x 2134mm) single door set DS432W17 Painted white with white gasket, 1/36 x 2/84 (914 x 2134mm) single door set 34 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

35 WEATHERSEALING (KERF-INSERTED) E-Lon.650 DS421 Kerf Inserted Jamb Weatherseal 5/32" (4mm) 23/64" (9mm) 21/32 / 0.650" (16.66mm) 1 (25.4mm) 9/16 (14.3mm) Material: Closed cell foam Thermoplastic Elastomers (TPEs) Rigid kerf material NAFS DS421BL Black. Lengths: 37, 82, 86, 97 Full coil: 500 ft. (152m) or custom size coil up to 500 ft. DS421B Brown. Lengths: 37, 82, 86, 97 Full coil: 500 ft. (152m) or custom size coil up to 500 ft. DS421W White. Lengths: 37, 82, 86, 97 Full coil: 500 ft. (152m) or custom size coil up to 500 ft. DS421 Used in typical 2-1/8 (54mm) rabbeted / kerfed door jamb 2-1/8 (54mm) 1/8 (3.2mm) 1/2 (12.7mm) 37 = 940mm 82 = 2083mm 86 = 2184mm 97 = 2464mm 500 ft = 152m Fire and Smoke Ratings for DS421 used in Door Jamb Application Only UL certification for 20 minute fire rating. Equates to a category "J" rating. UL certification to 1784 standard. Equates to a category "H" rating for the gasket. Having the "H" rating will allow customers to use the gasket in door assemblies that are rated for smoke and draft (an "S" rated door system). Multifunctional Use DS421 Used in outswing door sill application DS421 Used in inswing door sill application DS421 Kerf gasket used with DS422 aluminum carrier for retrofit weathersealing door jamb kit Seamless, elastomeric skin provides easy breakaway, long-life integrity, & eliminates water penetration Available in.650 reach (21/32 [16.66mm]) for (9.5mm) weatherseal gap. Dual-locking flexible barbs insert easily, hold securely without slipping, & can be removed & reinserted without damage Closed cell foam profile resists water absorption, eliminates wicking & has no air pockets Operating forces remain constant over a wide compression range helping doors exceed all industry requirements Independent tests have shown E-Lon performs like new under all temperature conditions Standard cut lengths are 82 & 37 (2083mm & 940mm). Custom cut lengths available: 86" (2184mm), 97 (2464mm) all sizes in stock. Also available in 500 ft (125m) rolls Designed for standard 1/8 x 1/2 kerfs, & 2-1/8 jamb (3.2mm x 12.7mm x 54mm) Choice of colours: brown, black, white (some sizes & colours may not be stocked) Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 35

36 WEATHERSEALING (KERF-INSERTED) E-Lon.355 DS417 Kerf Inserted Weatherseal for Jamb or Doors 3/16 (4.8mm) 27/64 (10.6mm) 23/64 (9mm) This application shows DS417 used in between folding doors on Eclipse E2, E3 and E4 systems. It may also be used on wood casement windows. DS417 kerf seal insert 9/64 (3.6mm) DS417B Brown, by footage DS417B1000 Brown, 1000 ft (304.8m) coil DS417BL Black, by footage DS417BL1000 Black, 1000 ft (304.8m) coil DS417W White, by footage DS417W1000 White, 1000 ft (304.8m) coil 5/32 (4mm) 1-3/4 (44.5mm) E-Lon.918 DS428 Extended Reach Kerf Inserted Jamb Weatherseal Recommended for header & jamb side only & astragal. Use standard reach weatherseal.650 for hinge side. INSTALLATION We recommend that the header piece of the door seal be miter cut over the jamb piece, or miter cut the jamb over the header. HEADER jamb gasket butt into head jamb 59/64 (23mm) 11/64 (4.44mm) 23/64 (10mm) DS428BL82 Black, 82" (mm) DS428BL97 Black, 97" (mm) DS428W82 White, 82" (mm) DS428W97 White, 97" (mm) Fire and Smoke Ratings for DS428 UL certification for 20 minute fire rating. Equates to a category "J" rating. UL certification to 1784 standard. Equates to a category "H" rating for the gasket. Having the "H" rating will allow customers to use the gasket in door assemblies that are rated for smoke and draft (an "S" rated door system). An overlapping miter joint seals better for lower air infiltration and fewer drafts. The objective is to square-cut one -- so that the adjoining mitered piece will overlap. Fabricators also may choose to butt joint the jamb to the header to optimize their fabrication productivity when using automated seal Installation equipment. Sealing may not be optimal in this application. HEADER HEADER head gasket butt into side jamb not optimal sealing performance JAMB JAMB JAMB 36 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

37 DS-C2 SEALING PRODUCTS DS-C2 FEATURES Reduces air & water infiltration at corners Sealing fins TPV low compression foam Reduce labor-increase throughout DS-C2 BENEFITS Soft compliant seal material combined with carefully designed geometry allows continuous corner applications to be seamless. Optional SEBS sealing fins enhance the sealing performance. Soft TPV foam allows the seal to be easily compressed to form a tight seal in window corners. No need for cutting precise lengths or miters for an interference corner fit or messy welding. DS-C2 seals form a continuous seal all the way around the frame in one easy installation step. 6-9/16 jamb DS420 continuous cornering TPV foam weatherstrip for sill & jamb DS1 Storm Sill NAFS.14 (3.5mm).5 (12.7mm).62 (16mm).37 (9mm).99 (25mm).1 (2.5mm) Keft Slot.4 (10mm).04 (1mm) DS420BL500 Black (stock item) Available in 500 ft (152.4m) coils or 1000 ft (304.8m) per carton.100 (2.5mm).36 (9mm).03 (0.8mm).4 (10mm).63 (16mm).23 (6mm).125 (3mm).22 (5.6mm).03 (0.8mm).32 (8mm).55 (14mm).23 (6mm) Continuous Cornering TPV Foam Weatherseal Seal all the way around the frame & door sill on prehung units in one easy step. Kerf Slot Kerf Slot.25 (6mm).08 (2mm).08 (2mm) DS419BL1000 Black Available in 1000 ft (304.8m) coils..25 (6mm) DS437BL1500 Black Available in 1500 ft (457.2m) coils. CUSTOM ORDER, CALL FOR MANUFACTURING TIME CUSTOM ORDER, CALL FOR MANUFACTURING TIME Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 37

38 GASKET WEATHERSEALING Kerf Inserted Gasket Seal For Windows 21/64 (8.3mm) DS425W White DS425B Brown Lengths available: By footage or 1500 ft (457m) coil kerf slot size 7/64 (2.8mm) 1/4 (6.4mm) 21/64 (8.3mm) 15/64 (6mm) E-Lon.490 DS433 Jamb Weatherseal 31/64 (12.3mm) 37/64 (14mm) 25/64 (10mm) Fire and Smoke Ratings for DS433 only UL certification for 20 minute fire rating. Equates to a category "J" rating. UL certification to 1784 standard. Equates to a category "H" rating for the gasket. Having the "H" rating will allow customers to use the gasket in door assemblies that are rated for smoke and draft (an "S" rated door system). 3/16 (4.7mm) DS433BL500 Kerf inserted gasket, black, 500 ft (152.4 m) coil Kerf Inserted Gasket Seal For Windows or Doors (9.5mm) 13/64 (5mm) jamb sash edge 7/64 (2.8mm) 13/32 (10mm) sash face stop Minimum space between the sash face & the stop: 3/16 (4.7mm) Maximum space: 5/16 (8mm) Tested for air & water infiltration to CSA A440. DS426B Kerf inserted gasket, brown DS426BL Kerf inserted gasket, black DS426W Kerf inserted gasket, white DS426B2000 Brown, full carton 2000 ft (609.6m) DS426BL2000 Black, full carton 2000 ft (609.6m) DS426W2000 White, full carton 2000 ft (609.6m) 38 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

39 WEATHERSEALING (KERF-INSERTED) Kerf Inserted EPDM Foam-filled Bulb Seal 1/4 (6.4mm) 7/32 (5.5mm) 7/64 (2.8mm) DS435B Brown DS435W White 5/16 (8mm) 5/64 (2mm) Required kerf slot size for DS435 UltraGlide TPE skin EPDM closed cell foam with a hollow core polypropylene kerf base TPE retention barbs Compression Seal, Adhesive-Backed 7/16 (11mm) (9.5mm) DS415B144 Brown 144 (3658mm) DS415W144 White 144 (3658mm) DS415BL144 Black 144 (3658mm) Kerf Inserted Bulb Seal For Windows or Astragals 1/2 (12.7mm) DSAP500W Bulb seal, white DSAP500BL Bulb seal, black Kerf slot size 3/32 x 3/16 (2.3mm x 4.7mm) Kerf Inserted Bulb Seal For Windows or Astragals 7/64 (2.77mm) (9.5mm) 13/64 (5.15mm) DSAP475BL Bulb seal, black Kerf slot size 3/32 x 3/16 (2.3mm x 4.7mm) Kerf Inserted Fin-Pile 17/64 (6.7mm) 3/16 17/64 (4.7mm) (6.7mm) 17/64 (6.7mm) 5/16 (8mm) 25/64 (10mm) 17/64 (6.7mm) 5/32 (4mm) 5/32 (4mm) 5/32 (4mm) DSP108-20BL 3/16 (4.7mm) pile height, black DSP108-35BL 5/16 (8mm) pile height, black 1/2 (12.7mm) DSP108-50BL 1/2 (12.7mm) pile height, black 37/64 (14.7mm) Required kerf slot size for DSP108 kerf slot size 9/64 (3.5mm) 5/16 (8mm) Kerf Inserted PVC Flex 25/64 (10mm) 15/64 (6mm) 15/64 (6mm) DSPF109T Extruded PVC/tan. Length available: 12ft (3658mm) only. DSPF109W White Required kerf slot size 5/64 (2mm) wide x 9/32 (7mm) deep Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 39

40 ASTRAGALS - ALUMINUM FOR INSWING DS1 STORM SILLS strike plate applied to underside of jamb 3/4 (19mm) 12 (305mm) 37/64" (14.6mm) 1 (25.4mm) INTERIOR EXTERIOR DS14-26D Flushbolt, satin finish DS14-10B Bronze 19/64 (7.6mm) snap in cover EXTERIOR INTERIOR 40 ALL DRAWINGS. SEE PAGE 6 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

41 ASTRAGALS - ALUMINUM FOR INSWING DS1 STORM SILLS Each extruded aluminum astragal comes complete with pile inner seal, snap in covers, dead bolt strike, latch strike & standard punch outs for deadbolt. Kerf weatherseal, top and bottom flushbolts not included with astragal, order separately. DS446N Series (Non Thermally Broken) 1-9/16 (40mm) EXTERIOR SIDE DS448N Series (Thermally Broken) 1-9/16 (40mm) EXTERIOR SIDE (9.3mm) Kerf inserted weatherseal not included with astragal. Order separately. (9.3mm) thermal break ACTIVE DOOR INSWING INACTIVE DOOR ACTIVE DOOR INSWING INACTIVE DOOR DS G replacement pile insert Use 1-1/2" (38mm) screws for installation 1-3/4 (44.45mm) door thickness 2-1/8 (54mm) DS G replacement pile insert Use 1-1/2" (38mm) screws for installation 1-3/4 (44.45mm) door thickness Bronze anodized Clear anodized White painted DS446D79N DS446C79N DS446W79N DS446D80N DS446C80N DS446W80N DS446D84N DS446C84N DS446W84N DS446D95N DS446C95N DS446W95N DS446D96N DS446C96N DS446W96N Bronze anodized Clear anodized White painted DS448DTB79N DS448CTB79N DS448WTB79N DS448DTB80N DS448CTB80N DS448WTB80N DS448DTB84N DS448CTB84N DS448WTB84N DS448DTB95N DS448CTB95N DS448WTB95N DS448DTB96N DS448CTB96N DS448WTB96N 41/64 (16.4mm) 3/16 (4.7mm) 3/16 (4.7mm) 5 slope DS346KITCH Chrome hardware kit only consisting of screws & strike plates DS346KITD Dark bronze hardware kit only consisting of screws & strike plates Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 41

42 ASTRAGALS - ALUMINUM FOR OUTSWING DS STORM SILLS strike plate applied to underside of jamb 3/4 (19mm) 12 (305mm) DS346KITCH Chrome hardware kit only consisting of screws & strike plates DS346KITD Dark bronze hardware kit only consisting of screws & strike plates 37/64" (14.6mm) DS14-26D Flushbolt, satin finsih DS14-10B Bronze 1 (25.4mm) 19/64 (7.6mm) EXTERIOR INTERIOR 42 ALL DRAWINGS. SEE PAGE 51 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

43 ASTRAGALS - ALUMINUM FOR OUTSWING DS STORM SILLS Each T-Bar astragal comes with bulb weatherseal & punchouts for latch & deadbolt. Each extruded aluminum astragal comes complete with pile inner seal, snap in covers, dead bolt strike, latch strike & standard punch outs for deadbolt. Kerf weatherseal, top and bottom flushbolts not included with astragal, order separately. DS445N Series (Non Thermally Broken) 1-13/32 (35.5mm) DS447N Series (Thermally Broken) 1-13/32 (35.5mm) 11/16 (17.5mm) EXTERIOR SIDE T-bar 11/16 (17.5mm) EXTERIOR SIDE Use 1-1/2" (38mm) screws for installation 1-3/4 (44.45mm) door thickness 2-1/8 (54mm) 1-3/4 (44.45mm) door thickness ACTIVE DOOR OUTSWING INACTIVE DOOR ACTIVE DOOR OUTSWING INACTIVE DOOR (9.3mm) 1-9/16 (40mm) 27/32 (21.3mm) INTERIOR SIDE Kerf inserted weatherseal not included with astragal. Order separately. (9.3mm) thermal break 1-9/16 (40mm) INTERIOR SIDE 27/32 (21.3mm) Bronze anodized Clear anodized White painted DS445D79N DS445C79N DS445W79N DS445D80N DS445C80N DS445W80N DS445D84N DS445C84N DS445W84N DS445D95N DS445C95N DS445W95N DS445D96N DS445C96N DS445W96N Bronze anodized Clear anodized White painted DS447DTB79N DS447CTB79N DS447WTB79N DS447DTB80N DS447CTB80N DS447WTB80N DS447DTB84N DS447CTB84N DS447WTB84N DS447DTB95N DS447CTB95N DS447WTB95N DS447DTB96N DS447CTB96N DS447WTB96N 1-13/32 (35.5mm) 11/16 (17.5mm) 15/32 (12mm) 2-3/16 (55.6mm) DS183 Extruded aluminum with TPE (T) insert DS183CT84 Clear anodized 84 (2134mm) DS183CT96 Clear anodized 96 (2438mm) DS183DT84 Bronze anodized 84 (2134mm) DS183DT96 Bronze anodized 96 (2438mm) DS183WT84 Painted white 84 (2134mm) DS183WT96 Painted white 96 (2438mm) Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 43

44 ASTRAGALS - ALUMINUM INSWING Inswing Astragals Each extruded aluminum astragal comes complete with top & bottom shoot bolts & 2 strikes, hardware pack, pile inner seal, snap in covers, dead bolt strike, latch strike & standard punch outs for deadbolt. Kerf weatherseal & molded bottom boot not included with astragal, order separately. SIZES: 79 (2007mm), 80 (2032mm), 84 (2134mm), 95 (2413mm) & 96 (2438mm) Custom sizes & custom finishes available, call for manufacturing time DS346N Series (Non Thermally Broken) 1-13/32 (36mm) EXTERIOR SIDE NAFS DS348N Series (Thermally Broken) 1-13/32 (36mm) EXTERIOR SIDE kerf inserted weatherseal not included with astragal. order separately. thermal break ACTIVE DOOR INSWING 2-1/8 2-3/4 (54mm) (70mm) INACTIVE DOOR guide for shoot bolt door thickness ACTIVE DOOR INSWING 2-1/8 2-3/4 (54mm) (70mm) INACTIVE DOOR guide for shoot bolt door thickness snap-in pvc filler DS G replacement pile insert shoot bolt diameter 5/16 (8mm) Use 1-1/2" (38mm) screws for installation snap-in pvc filler DS G replacement pile insert shoot bolt diameter 5/16 (8mm) Use 1-1/2" (38mm) screws for installation gap between doors 13/16 (21mm) gap between doors 13/16 (21mm) Bronze anodized DS346D79 DS346D80 DS346D84 DS346D95 DS346D96 Clear anodized DS346C79 DS346C80 DS346C84 DS346C95 DS346C96 White painted DS346W79 DS346W80 DS346W84 DS346W95 DS346W96 Bronze anodized DS348DTB79 DS348DTB80 DS348DTB84 DS348DTB95 DS348DTB96 Clear anodized DS348CTB79 DS348CTB80 DS348CTB84 DS348CTB95 DS348CTB96 White painted DS348WTB79 DS348WTB80 DS348WTB84 DS348WTB95 DS348WTB96 Inswing Door Outswing Door INTERIOR left hand door right hand door INTERIOR left hand door right hand door EXTERIOR EXTERIOR 44 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

45 ASTRAGALS - ALUMINUM OUTSWING Outswing Locking Astragals T-Bar astragal comes complete with pvc foam weatherseal gasket & punch outs for latch & deadbolt. Sold as 2 piece sets only. Triple weathersealed system. Each extruded aluminum astragal comes complete with top & bottom shoot bolts & 2 strikes, hardware pack, pile inner seal, snap in covers, dead bolt strike, latch strike & standard punch outs for deadbolt. Kerf weatherseal & molded bottom boot not included with astragal, order separately. SIZES: 79 (2007mm), 80 (2032mm), 84 (2134mm), 95 (2413mm) & 96 (2438mm) Custom sizes & custom finishes available, call for manufacturing time. DS345N / DS181 Series (Non Thermally Broken) DS347N / DS181 Series (Thermally Broken) 1-11/16 (43mm) 13/16 (21mm) 3/32 (2mm) DS181 EXTERIOR SIDE NAFS 1-11/16 (43mm) 13/16 (21mm) 3/32 (2mm) DS181 EXTERIOR SIDE 3-3/16 (81mm) snap-in pvc filler use 1-1/2 (38mm) screws for installation 3-3/16 (81mm) snap-in pvc filler use 1-1/2 (38mm) screws for installation 2-1/8 (54mm) shootbolt diameter 5/16 (8mm) ACTIVE DOOR OUTSWING guide for shoot bolt INACTIVE DOOR door thickness 1-3/4 (44.45mm) 2-1/8 (54mm) shootbolt diameter 5/16 (8mm) ACTIVE DOOR OUTSWING guide for shoot bolt INACTIVE DOOR door thickness 1-3/4 (44.45mm) (9.5mm) weatherseal not included with astragal, order separately. 1-13/32 (36mm) Bronze anodized Clear anodized White painted DS345D79 DS345C79 DS345W79 DS345D80 DS345C80 DS345W80 DS345D84 DS345C84 DS345W84 DS345D95 DS345C95 DS345W95 DS345D96 DS345C96 DS345W96 INTERIOR SIDE (9.5mm) weatherseal not included with astragal, order separately. thermal break 1-13/32 (36mm) INTERIOR SIDE Bronze anodized Clear anodized White painted DS347DTB79 DS347CTB79 DS347WTB79 DS347DTB80 DS347CTB80 DS347WTB80 DS347DTB84 DS347CTB84 DS347WTB84 DS347DTB95 DS347CTB95 DS347WTB95 DS347DTB96 DS347CTB96 DS347WTB96 Neoprene bottom seal for inswing astragals only DS346KITCH Chrome hardware kit only consisting of screws & strike plates DS346KITD Dark bronze hardware kit only consisting of screws & strike plates DS346LBOOT Left hand boot only DS346RBOOT Right hand boot only Boot not included with astragal, please order separately Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 45

46 ASTRAGALS Composite Astragal DS193 Series 2-1/8 (54mm) 2-15/16 (75mm) 1-7/32 (31mm) 1-1/2 (38mm) (9.5mm) 13/16 (21mm) 13/16 (21mm) Kerf inserted weatherseal not included with astragal. Order separately. 1-1/2 (38mm) 2 (51mm) 1-25/32 (45mm) 7/16 (11mm) 5/8 (15.8mm) 1-1/32 (26mm) Kerf inserted weatherseal not included with astragal. Order separately. 7/16 (11mm) 2-1/8 (54mm) NOTE: Products ending in M are machined for flush bolts, both ends DS193W79M smooth white finish, 79 (2007mm), machined DS193W80M smooth white finish, 80 (2032mm), machined DS193W81 smooth white finish, 81" (2057mm), not machined DS193W81M smooth white finish, 81" (2057mm), machined DS193W95M smooth white finish, 95" (2413mm), machined DS193W96M smooth white finish, 96 (2438mm), machined DS193W97 white finish, 97" (2464mm), not machined DS193GRAIN79M wood grain finish, 79 (2007mm), machined DS193GRAIN80M wood grain finish, 80 (2032mm), machined DS193GRAIN81 wood grain finish, 81 (2057mm), not machined DS193GRAIN81M wood grain finish, 81 (2057mm), machined DS193GRAIN95M wood grain finish, 95 (2413mm), machined DS193GRAIN96M wood grain finish, 96 (2438mm), machined DS193GRAIN97 wood grain finish, 97" (2464mm), not machined The DS193 Series Composite Astragal is machined top and bottom for flushbolts. Flushbolt by other, not included with the above astragal. 3-7/32 (82mm) DS191P79M DS191P7978M DS191P80M DS191P8078M DS191P84 DS191P84M DS192C79M DS192C80M DS192C84M DS192C96M DS192C84 DS192C95M DS192C96 1-1/2" (38mm) NOTE: Products ending in M are machined for flush bolts, both ends 1- (35mm) Primed 79 (2007mm), machined Primed 79-7/8" (2029mm), machined Primed 80 (2032mm), machined Primed 80-7/8" (2054mm), machined Primed 84" (2134mm), not machined Primed 84" (2134mm), machined Fir clear 79 (2007mm), machined Fir clear 80 (2032mm), machined Fir clear 84 (2134mm), machined Fir clear 96 (2438mm), machined Fir clear 84 (2134mm), not machined Fir clear 95" (2413mm), machined Fir clear 96 (2438mm), not machined 2-1/8 (54mm) DS196P80M1 1- (35mm) primed fir, machined for flush bolts, top only. 80 (2032mm) DS196P80M1 1- (35mm) primed fir, machined for flush bolts, top only. 80 (2032mm) DS196P80M2 1- (35mm) primed fir, machined for flush bolts, top and bottom. 80 (2032mm) DS196P84M1 1- (35mm) primed fir, machined for flush bolts, top only, both sides. 84 (2134mm) DS196P84M2 1- (35mm) primed fir, cut to custom length from 84 (2134mm) piece and machined for flush bolts, top and bottom (Non handed). DS196P84 1- (35mm) primed fir, not machined, stock length. 46 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

47 Bumper Thresholds 1/2 (12.7mm) 1/2 (12.7mm) 1-13/32 (36mm) DS121AV Extruded aluminum mill finish with PVC insert, grey DS121AVBL Mill finish with PVC insert, black DS121WV White with grey insert DS121BVBL Brown with black insert 1-23/32 (44mm) DS120AV Extruded aluminum mill finish with PVC insert, grey DS120AVBL Mill finish with black insert DS120DVBL Bronze anodized with black insert DS670DS Door Strap Designed for the shipping & installation of your pre-hung door units. Fits all exterior & interior pre-hung doors with 2-1/8 cross bores & 1 edge bores. barrel spacer door jamb Rain Drip 5/8 (16mm) 1-1/2 (38mm) strap door DS670DS DS670DS1000 Door strap. Less than full carton quantity Door strap. Full carton 1000 pieces DS164A Extruded aluminum mill finish. Lengths available: 36 (914mm) & 48 (1219mm) DS164D Bronze anodized Pile Pad Seals 1/4 (6.4mm) 1 (25.4mm) DS672W Corner seal pad, white pile, adhesive-backed DS672BL Corner seal pad, black pile, adhesive-backed DS672 Apply to corner of jamb on hinge side to seal against air & light infiltration. May also be used on latch side. 1 (25.4mm) 2 (50.8mm) Adhesive backed pile, seals between bottom of astragal and platform DS462PS 2 pile seals: 1 left, 1 right Copyright DraftSeal DraftSeal Product Catalogue FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL 47

48 ADHESIVE-BACKED GASKET SEALS Triple Fin Silicone Adhesive-Backed Gasketing (Fire, Air & Smoke Rated) adhesive backing 1/2 (12.7mm) 7/16 (12mm) UL 10 (c) 2009 S DSS99D3 bronze colour, 1/36 (5.18m) DSS99D6 bronze colour, 1/72 (6.40m) DSS99D7 bronze colour, 1/84 (7.62m) DSS99D8 bronze colour, 1/96 (93.2m) DSS99D10 bronze colour, 1/120 DSS99D17 bronze colour, 1/3 ft x 2/7 ft DSS99D19 bronze colour, 1/3 ft x 2/8 ft DSS99D20 bronze colour, 1/6 ft x 2/7 ft DSS99D21 bronze colour, 3/7 ft DSS99D24 bronze colour, 3/8 ft Hinge Jamb jamb hinge side stop door edge DSS99 APPLICATION DETAILS Header 3/16 (4.7mm) minimum clearance required at head & latch door top door face stop Strike Jamb door face stop jamb lock side Silicone Adhesive-Backed Gasketing (Fire, Air & Smoke Rated) For Wood Door & Metal Frame This design is for those applications with very tight clearances from door edge to jamb & the pressure to close the door is critical. 5/16 (8mm) 3/16 (4.7mm) adhesive backing Bronze DSS11D17 17 ft. (5.18m) DSS11D21 21 ft. (6.40m) DSS11D25 25 ft. (7.62m) DSS11D ft. (93.2m) S DSS11 & DSS66 APPLICATION DETAILS Alternate positioning for hinge jamb, strike jamb & header (door must be able to operate properly). stop For Hollow Metal Door & Metal Frame 1/2 (12.7mm) 1/4 (6.4mm) adhesive backing S door edge Bronze DSS66D17 17 ft. (5.18m) DSS66D21 21 ft. (6.40m) DSS66D25 25 ft. (7.62m) DSS66D ft. (93.2m) White DSS66W17 17 ft. (5.18m) DSS66W21 21 ft. (6.40m) DSS66W25 25 ft. (7.62m) DSS66W ft. (93.2m) 48 FULL SCALE EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

49 MULTI-PURPOSE WEATHERSEAL TAPES Packaged Rolls All adhesive backed tapes have a limited shelf life. These products must be used within 6 months of purchase & must be stored between 50 & 100 Fahrenheit (10 & Celsius). Open Cell Polyurethane A/B Tapes thickness width DS831R 3/16 x x 16.5 ft. grey (4.7mm x 9.5mm x 5.02m) DS835R 1/4 x 1/2 x 16.5 ft. grey (6.4mm x 12.7mm x 5.02m) DS837R x x 16.5 ft. grey (9.5mm x 9.5mm x 5.02m) Neoprene Closed Cell Sponge A/B Tapes thickness width DS861R 3/16 x x 10 ft. black (4.7mm x 9.5mm x 3.04m) DS863R 1/4 x 1/2 x 10 ft. black (6.4mm x 12.7mm x 3.04m) DS864R 5/16" x 3/8" x 10 ft. black (8mm x 9.5mm x 3.04m) DS865R 5/16 x 3/4 x 10 ft. black (8mm x 19mm x 3.04m) DS866R x x 10 ft. black (9.5mm x 9.5mm x 3.04m) DS868R 1/2 x 1 x 10 ft. black (12.7mm x 25.4mm x 3.04m) PVC Closed Cell Soft Foam A/B Tapes thickness width DS847R x x 16.5 ft. grey (9.5mm x 9.5mm x 5.02m) DS848R x 3/4 x 16.5 ft. grey (9.5mm x 19mm x 5.02m) Xl Cell/Cross-Linked Polyurethane A/B Tapes thickness width DS852R 1/8 x x 16.5 ft. white (3.2mm x 9.5mm x 5.02m) Camper Truck Tape-Closed Cell Sponge PVC A/B Tape thickness width DS885R 3/16 x 1-1/4 x 30 ft. grey (4.7mm x 32mm x 9.14m) Bulk Rolls All adhesive gaskets have a limited shelf life. These products must be used within 6 months of purchase & must be stored between 50 & 100 Fahrenheit (10 & Celsius). Neoprenes (Black) OVERHEAD VIEW thickness width jamb DS /8 x x 50 ft. BL (3.2mm x 9.5mm x 15.24m) DS /8 x 1/2 x 50 ft. BL (3.2mm x 12.7mm x 15.24m) DS /16 x 3/4 x 25 ft. BL (8mm x 19mm x 7.6m) DS /2 x 3/4 x 12.5 ft. BL (12.7mm x 19.5mm x 3.8m) door DS /4 x 1 x 50 ft. BL (6.4mm x 25.4mm x 15.24m) neoprene DS /2 x 1 x 12.5 ft. BL (12.7mm x 25.4mm x 3.8m) gasket Backer Rod Sealant backer rod is an extruded round, grey, closed-cell low-density polyethylene foam with a skin-like outer texture. It is an ideal non-absorbent, compressible, back-up material inserted into a joint to control sealant tooling, to allow proper sealant wetting of the joint surfaces, & to yield proper bond breaker between the backup material & the sealant. Commonly used in glazing operations, window & door applications, expansion joints, curtain wall joints, partitions, log construction, pavement joints & repairs, precast units, & copings. Available in Footage or Bulk Coils. DSROD14 1/4 (6.3mm) diameter 4000 ft (1219m) per carton DSROD38 (9.5 mm) diameter 2100 ft (640m) per carton DSROD12 1/2 (12.7 mm) diameter 2500 ft (762m) per carton DSROD58 5/8" (15.7mm) diameter 1550 ft (473m) per carton DSROD34 3/4 (19mm) diameter 1100 ft (335m) per carton DSROD1 1 (25.4mm) diameter 600 ft (182m) per carton Copyright DraftSeal DraftSeal Product Catalogue 49 EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL

50 FANTOM DOOR STOP INNOVATIVE & MODERN A SLEEK NEW DOORSTOP INTEGRATED WITH A HOLD-OPEN DEVICE The Fantom Doorstop System provides an elegant new approach to doorstop hardware. The system functions not only as a stop, but as a hold-opon device as well. The modern-look, flush-mounted pin alleviates trip hazards and cleaning obstacles. The concealed rare earth magnet technology ensures exceptional mechanical functionality. Flush mounted Rare earth magnet induced hold-open device No trip hazard Streamlined modern finish Suitable for single and double leaf doors Suitable for various fixing positions Quick and easy installation HOW DOES IT WORK? FOR THE INSTALLER Suitable for various fixing positions Installation achievable in a wide range of door thicknesses (no less than 35mm) Installation achievable in various floor thicknesses and finishes Simple, fast installation. Specific drill bits available. Best installed pre-door installation. FOR THE SPECIFIER / ARCHITECT High quality design ensures an ideal solution for project applications Innovative design creates a streamlined appearance and removes all tripping hazards Available in a wide range of colours and designs Creates door stop and hold open device solution in one cost effective product SOFT/MEDIUM CONTROLLED OPENING STRENTH, HOLD OPEN IS ACTIVATED. (FIGURE A + B) When the door is opened in a controlled fashion, the unique striker plate design will hold the pin in an activated position and keep the door in a firm hold opened position. From this hold open position, the door can be easily closed with minimal effort. FOR THE USER Removes tripping hazard posed by conventional door stop products Easy to clean around Creates doorstop and hold open device solution in one cost effective product No maintenance required Sleek streamlined look 50 EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL DraftSeal Product Catalogue Copyright DraftSeal

51 COMPONENTS Each fantom doorstop pack contains the following components: FRENCH DOORS 1-16/64" (33mm) 55/64" (22mm) magnet, rare earth 3-5/32" (80mm) 15/16" (24mm) diameter striker plate Use the Fantom Door Stop at the top of door instead of roller pins or lever latch locks. The Fantom system will hold the doors in place and easily allow them to open when you want. Use the Fantom door stop as a traditional stop and integrated hold-open. Both functions in one convenient integrated system. 63/64" (25mm) fixing screws x2, 8G x 25mm ss 1-49/64" (45mm) 25/64" (10mm) diameter pin, mild steel, zinc plated 7/64" (2.8mm) raised 1-11/16" (43mm) below ground 1-7/64" (28mm) diameter floor insert, polycarbonate 35/64" (13.8mm) diameter The Fantom Doorstop for single or french doors. 2 FUNCTIONS Door stop application: Use Fantom at the bottom of door. Latching door in closed position: Use Fantom at the top of the door. GAP SPEC finished floor line 5 ring finishes: chrome or satin black min 1/4" (6mm) max 1/2" (12.7mm) white clear DS15INSTALLKIT Installation kit DS15CARPETPUNCH Carpet punch DS15CLEAR 1 per box DS15BLACK 1 per box DS15WHITE 1 per box DS15CHROME 1 per box DS15SATIN 1 per box DS15CLEARRETAIL 1 per consumer clamshell package Also available DS13SMCHROME Door stop mounted to face of door DS15DIAMONDCORER Diamond Corer for tile floor Copyright DraftSeal DraftSeal Product Catalogue 51 EXCEPT AS NOTED. SEE PAGE 4 FOR SYMBOL DETAIL

52 Weathersealing Specialists Since 1960 Head Office & Manufacturing Centre, Vancouver, Canada 7470 Buller Avenue, Burnaby, B.C. V5J 4S5 Canada Phone: (604) Fax: (604) Outside Vancouver, B.C., please use our toll free numbers: Phone: Fax: Branch Office & Manufacturing Centre, Toronto, Canada Phone head office toll free for branch address Branch Office & Distribution Centre, Los Angeles, California, USA Phone head office toll free for branch address Eclipse Architectural Corporate Showrooms Vancouver & Toronto, Canada Los Angeles, California, USA