DS1 Storm - Sill System (Inswing) NAFS 11 COMPLIANT DS2 Storm - Sill System (Outswing) NAFS 11 COMPLIANT

Transcription

1 Weathersealing Specialists Since 1960 DS1 Storm - Sill System (Inswing) NAFS 11 COMPLIANT DS2 Storm - Sill System (Outswing) NAFS 11 COMPLIANT For Single Or Double Door Openings, Inswing Or Outswing Application Integrated with the DSF1 & DSF2 Accordion Pleated Hideaway Insect Screens (optional) Tomorrow s Innovative Solutions for Today s Doors & Windows The DS Group Of Companies: Draftseal, Kristrack, Eclipse Architectural & DSD Hardware DS1 Storm - Sill System Integrated with the Accordion Pleated Hideaway Insect Screens Revision (8) June 23, 2016 Printed catalogue may not be up to date, always refer to product website for most up to date content.

2 DS1 Storm - Sill System, Inswing Pre-hung Door Application 7-1/4 (184mm) Sill + 2 Nose 9 3/4 (19mm) 5/8 (15mm) end cap head jamb 8 Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant /4 (44.45mm) 3/16 (4.7mm) /8 (9.5mm) side jamb DS725 Sill 5 slope DS725EXTAE mill finish nose extension DS725EXTDE bronze anodized cover included with sill, shown in open position 5 1-9/64 (29mm) 2 seven port holes for attaching jamb to sill at each end of sill nosing in end cap 7-1/4 (184mm) 1-7/64 (28mm) 1-3/4 (44.45mm) jamb to sill gasket 7 After jamb, gasket and sill are assembled, caulking is still required along the top edge of sill (inside to outside) where it meets the jamb. Warranty is void if caulking is not applied properly. 9-1/4 (235mm) 6 1 x left hand 1 x right hand end cap s at each end of sill nosing 1 PVC main cover cap 5 Aluminum sill nose extension 8 Head jamb to side jamb gaskets 2 Main sill assembly (substrate / aluminum) 6 Plastic sill nose end caps 9 PVC Rain drip 3 TPV Foam continuous cornering weatherseal 7 Sill to jamb sealing gaskets 10 Protective PVC Sill Covers 4 Aluminum sill bead DS725AVT Extruded aluminum sill, mill finish with PVC interior cap (tan), PVC substrate, tan. 36 (914mm) or 150 (3810mm) lengths only. DS725DVT Extruded aluminum sill, bronze anodized with PVC interior cap (tan), PVC substrate, tan. 36 (914mm) or 150 (3810mm) lengths only. DS725AVB Extruded aluminum sill, mill finish with PVC interior cap (brown), PVC substrate, brown. 36 (914mm) or 150 (3810mm) lengths only. DS725DVB Extruded aluminum sill, bronze anodized with PVC interior cap (brown), PVC substrate, brown. 36 (914mm) or 150 (3810mm) lengths only. DS725AVW Extruded aluminum sill, mill finish with PVC interior cap (white), PVC substrate, white. 36 (914mm) or 150 (3810mm) lengths only. Warranty void if all sill noses are not secured to all DS1 Storm Sills as shown. A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. 2 FULL SCALE EXCEPT AS NOTED. VISIT FOR FULL WARRANTY INFO. Copyright 2016 DS Group & DraftSeal

3 DS1 Storm - Sill System, Inswing Pre-hung Door Application 6-9/16 (167mm) Sill + 2 Nose DS725EXTAE mill finsih nose extension DS725EXTDE bronze anodized DS696 Sill 1-3/4 (44.45mm) 1-7/64 (28mm) cover included with sill, shown in open position 1-9/64 (29mm) at each end of sill nosing in end cap 6-9/16 (167mm) 8-9/16 (218mm) DS696AVT Extruded aluminum sill, mill finish with PVC interior cap (tan), PVC substrate, tan. 36 (914mm) or 150 (3810mm) lengths only. DS696DVT Extruded aluminum sill, bronze anodized with PVC interior cap (tan), PVC substrate, tan. 36 (914mm) or 150 (3810mm) lengths only. DS696AVB Extruded aluminum sill, mill finish with PVC interior cap (brown), PVC substrate, brown. 36 (914mm) or 150 (3810mm) lengths only. DS696DVB Extruded aluminum sill, bronze anodized with PVC interior cap (brown), PVC substrate, brown. 36 (914mm) or 150 (3810mm) lengths only. DS696AVW Extruded aluminum sill, mill finish with PVC interior cap (white), PVC substrate, white. 36 (914mm) or 150 (3810mm) lengths only. Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant 4-9/16 (116mm) Sill + 2 Nose DS496EXTAE mill finish nose extension DS496EXTDE bronze anodized DS496 Sill 1-3/4 (44.45mm) cover included with sill, shown in open position 1-7/64 (28mm) 1-3/8 (35mm) at each end of sill nosing in end cap 4-9/16 (116mm) 6-9/16 (167mm) DS496AVT Extruded aluminum sill, mill finish with PVC interior cap (tan), PVC substrate, tan. 36 (914mm) or 150 (3810mm) lengths only. DS496DVT Extruded aluminum sill, bronze anodized with PVC interior cap (tan), PVC substrate, tan. 36 (914mm) or 150 (3810mm) lengths only. DS496AVB Extruded aluminum sill, mill finish with PVC interior cap (brown), PVC substrate, brown. 36 (914mm) or 150 (3810mm) lengths only. DS496DVB Extruded aluminum sill, bronze anodized with PVC interior cap (brown), PVC substrate, brown. 36 (914mm) or 150 (3810mm) lengths only. DS496AVW Extruded aluminum sill, mill finish with PVC interior cap (white), PVC substrate, white. 36 (914mm) or 150 (3810mm) lengths only. A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. Copyright 2016 DS Group & DraftSeal FULL SCALE EXCEPT AS NOTED. VISIT FOR FULL WARRANTY INFO. 3

4 DS1 Storm - Sill System, Inswing Pre-hung Door Application When Ordering DS1 Storm - Sill System, TEN (10) Components Are Required To Assemble A Complete Sill: 1 PVC main cover cap 6 Plastic sill nose end caps 2 Main sill assembly (substrate / aluminum) 7 Sill to jamb sealing gaskets 3 TPV Foam continuous cornering weatherseal 8 Head jamb to side jamb gaskets 4 Aluminum sill bead 9 PVC Rain drip 5 Aluminum sill nose extensions: 1, (25.4mm) 10 Protective PVC Sill Covers 2 (50.8mm), 3 (76.2mm) or 4 (101.6mm) 1 Main cover cap pvc (snap-on) 2 Main sill assembly: PVC substrate available in 3 colours: tan, brown or white. Aluminum sill available in 2 colours: mill finish (A) & bronze anodized (D) DS725CAPTVE150 tan DS725CAPBVE150 brown DS725CAPWVE150 white 150 (3810mm) length only DS725AV36 7-1/4 sill x 36 DS725AV /4 sill x 150 or DS696AV36 6-9/16 sill x 36 DS696AV /16 sill x 150 or DS496AV36 4-9/16 sill x 36 DS496AV /16 sill x = 914mm 150 = 3810mm DS725WHC Weep hole cover included with sill 3 Continuous cornering weatherseal (kerf slot inserted) DS420BL500 black DS420BEIGE500 beige Available in 500 ft (152.4m) roll or 2 rolls x 500 ft. (152.4m) per carton = 1,000 ft. (304.8m) 4 Sill bead (snap-in) DS725BEADAE150 aluminum mill finish DS725BEADDE150 bronze anodized 150 (3810mm) length only 5 Sill nose extensions (Refer to next page) DS496EXTAE nose extension cover included with sill, shown in open position weep hole 1-3/8 (35mm) 6 Sill nose extension end caps DS725ECAPBL 1 x left hand 1 x right hand, black only 7 Sill to jamb gasket 8 (adhesive both sides) DS725SGASKET Head jamb to side jamb gasket DS725HGASKET screw entry for attaching end cap to sill nose Gaskets may be trimmed to fit all sill sizes of jamb & sill 9 PVC Rain drip, aluminum mounting base & end caps DS167B36 brown pvc, 36 (914mm) DS167W36 white pvc, 36 (914mm) 10 DS167B48 brown pvc, 48 (1219mm) DS167W48 white pvc, 48 (1219mm) 3/4 (19mm) 5/8 (15mm) bottom of door End cap for rain drip, brown or white DS167ECAPWL Left DS167ECAPWR Right Protective PVC Sill Covers DS725SPC150 for 7-1/4 (184mm) sill + nose DS696SPC150 for 6-9/16 (167mm) sill + nose DS496SPC150 for 4-9/16 (116mm) sill + nose DS764SPC150 for all sills (covers interior portion of sill) interior protective pvc cover Protect this fantastic sill during home construction exterior protective pvc cover ALL DRAWINGS NO SCALE 4 Copyright 2016 DS Group & DraftSeal

5 DS1 Storm - Sill System: Sill Nose Extensions Extension For DS696 & DS725 Extension For DS696 & DS /16 (33mm) 1-5/16 (33mm) 1 (25.4mm) DS725EXT-1AE169 mill finish, 169 (4293mm) length DS725EXT-1DE169 bronze anodized, 169 (4293mm) length 2 (50.8mm) DS725EXTAE169 mill finish, 169 (4293mm) length DS725EXTDE169 bronze anodized, 169 (4293mm) length Extension For DS696 & DS725 3 (76mm) DS725EXT-3AE169 mill finish, 169 (4293mm) length DS725EXT-3DE169 bronze anodized, 169 (4293mm) length Extension For DS696 & DS /16 (33mm) Apply silicon caulking around neoprene sill end plugs before inserting into end of sill Warranty void if all sill noses are not secured to all DS1 Storm sills as shown. Extension For DS /16 (33mm) 1-35/64 (39mm) 4 (101.6mm) DS725EXT-4AE169 mill finish, 169 (4293mm) length DS725EXT-4DE169 bronze anodized, 169 (4293mm) length 2 (50.8mm) DS496EXTAE169 mill finish, 169 (4293mm) DS496EXTDE169 bronze anodized, 169 (4293mm) Sill Nose Extension For DS696 & DS725 To Accommodate The DSF1 Accordion Pleated Hideaway Insect Screen pvc insert included End Caps For DS725, DS496 & DS /16 (33mm) 1-1/16 (26mm) 7/16 (11.5mm) 2 (50.8mm) DS200BLVE169 Replacement insert for DS200EXT nose extension, PVC black only, 169 (4293mm) length DS725ECAPBL DS200EXTAE169 mill finish, 169 (4293mm) length DS200EXTDE169 bronze anodized, 169 (4293mm) length FULL SCALE EXCEPT AS NOTED Copyright 2016 DS Group & DraftSeal 5

6 DS1 Storm - Sill System, Inswing Pre-hung Door Application Sill & Substrate Color Selection Mill finish (A) sill (aluminum) & tan (T) colour pvc substrate & cover cap Mill finish (A) sill (aluminum) & brown (B) colour pvc substrate & cover cap Mill finish (A) sill (aluminum) & white (W) colour pvc substrate & cover cap Bronze anodized (D) sill (aluminum) & tan (T) colour pvc substrate & cover cap Bronze anodized (D) sill (aluminum) & brown (B) colour pvc substrate & cover cap Base Support Platforms For Back To Back Jamb Mullions (Fits all DS1 Storm Sills, Inswing Applications) & T-Bar Tan (T) Brown (B) White (W) PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this document give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied. ALL DRAWINGS NO SCALE 6 Copyright 2016 DS Group & DraftSeal

7 DS1 Storm - Sill System, Inswing Pre-hung Door Application Base Support Platforms For Back To Back Jamb Mullions (Fits all DS1 Storm Sills, Inswing Applications) & T-Bar PLEASE NOTE: Refer to DS1 Storm - Sill System Assembly Manual for proper caulking procedure when attaching platforms to sill and T-Bar 2-31/64 (63mm) DS725BSPT714 tan DS725BSPB714 brown DS725BSPW714 white for 7-1/4 (184mm) jamb back to back 7-1/4 (184mm) 1-7/16 (36.5mm) 1-5/16 (33mm) 2-31/64 (63mm) 3-9/16 (90mm) 1-7/16 (36.5mm) 1-5/16 (33mm) DS725BSPTTBAR tan DS725BSPBTBAR brown DS725BSPWTBAR white For standard T-bar example shown: 3-1/4 3-11/16 (82mm) 4-9/16 (94mm) (116mm) T-bar 2-1/4 (57mm) 1-5/16 (33mm) DS725BSPT31116 tan DS725BSPB31116 brown DS725BSPW31116 white For large T-bar 3-11/16 (94mm) depth x 3-1/4 (83mm) DS1 Storm - Sill System Detail for 2-1/4 door thickness DS167 Rain drip DS725 sill nose DS725 Sill DS420 Gasket 2-1/4 (57mm) 3/16 (4.7mm) oak trim (by other) for 2-1/4 (57.15mm) door thickness 3/4 (19mm) finished floor 11/16 (17mm) 9-15/16 (252mm) #6 x 1 wood screw every 6 along length of trim 5/8 (15.8mm) DS1 Storm - Sill System Detail aluminum or pvc brick mould housing for DSF1 foldaway insect screen exterior glazing gasket sill end to jamb gasket End cap Main sill cover aluminum sill bead shoot-bolt strike plate for double door PVC main snap-on cover cap base support platform for t-bar or jamb back to back DS420 continuous cornering TPV foam weatherstrip for sill & jamb sill nose end cap PVC glazing bead for direct glazing of 3/4 (19mm) or 1 (24mm) I.G. units PVC substrate PVC glazing bead for 1-3/4 (44.45mm) side lite panels A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. Copyright 2016 DS Group & DraftSeal ALL DRAWINGS NO SCALE 7

8 DS1 Storm - Sill System, Inswing Pre-hung Door Application Sidelite Glazing Components Sidelite Glazing Options 1-13/32 (35.8mm) 63/64 (25mm) 3/8 (9.8mm) DS725CAPSL Bottom sidelite cover cap pvc, 150 (3810mm) length only. Available in tan (TVE), brown (BVE) & white (WVE) 13/32 (10.5mm) DS725GBLOCK3 Sidelite support block pvc, 3 (76mm) piece Direct glazing for 3/4 sidelite I.G. unit (Actual: 4mm, 12.7mm spacer bar, 4mm) 13/16 (20.7mm) IG unit DS864 neoprene gasket glazing block by other 37/64 (14.7mm) 19/32 (15mm) DS725SLGG500BL 500 ft. (152.4m) roll DS725SLGG100BL 100 ft. (30.4m) roll Exterior glazing gasket, black only 1-1/16 (27mm) 25/32 (20mm) This profile as shown will accommodate 3/4 I.G. thickness. This lip to be reduced by 5/64 (2mm) so it can be used for 1 I.G. thickness, as shown below. DS725GBLOCK3 PVC sidelite support block is not a continuous profile. It is supplied in 3 (76mm) pieces & support each end of the sidelite panel, as shown above & below. Direct glazing for 1 sidelite I.G. unit (Actual: 4mm, 15.8mm spacer bar, 4mm) 15/16 (23.8mm) IG unit DS861 neoprene gasket DS725BEADIG Interior bottom snap-in block pvc for 3/4 sidelite I.G. units, 150 (3810mm) length only. Available in tan (TVE), brown (BVE) & white (WVE) 1 (25mm) This lip has been reduced to accomodate 1 I.G. thickness as explained above 25/32 (20mm) This profile shown is same as above (DS725BEADIG) but with lip ripped down. 7/8 (22.7mm) 25/32 (20mm) 5/16 (7.9mm) 3/8 (9.5mm) Not supplied with glazing bead. Order separately. DS864 neoprene closed cell sponge adhesive backed. Assembly for 1-3/4 (44.45mm) sidelite panel 1-3/4 (44.45mm) Sidelite Panel DS861 neoprene gasket DS725BEAD175 Interior bottom snap-in block pvc for 1-3/4 sidelite panel, 150 (3810mm) length only. Available in tan (TVE), brown (BVE) & white (WVE) 3/16 (4.7mm) 3/8 (9.5mm) Not supplied with glazing bead. Order separately. DS861 neoprene closed cell sponge adhesive backed FULL SCALE EXCEPT AS NOTED 8 Copyright 2016 DS Group & DraftSeal

9 DS1 Storm - Sill System (SG): Inswing Pre-hung Door Application SECOND GENERATION ONE PIECE SILL (NO SILL NOSE EXTENSION) Available in 7-1/2 (190mm) and 8-1/2 (216mm) wide Base Support Platforms For T-Bar DS752BSPTAN Tan DS752BSPBR Brown DS752BSPWH White For standard T-bar DS751BSPTAN Tan DS751BSPBR Brown DS751BSPWH White For large T-bar 3-11/16 (94mm) depth x 3-1/4 (83mm) width ALL DRAWINGS NO SCALE Copyright 2016 DS Group & DraftSeal 9

10 Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant DS1 Storm - Sill System (SG), Inswing Pre-hung Door Application 7-1/2 (190.3mm) Sill: One piece sill, no detachable nose extension 3/4 (19mm) After jamb, gasket and sill are assembled, caulking is still required along the top edge of sill (inside to outside) where it meets the jamb. 1-3/4 (44.45mm) 5/8 (15mm) Warranty is void if caulking is not applied properly. DS167 Optional rain drip jamb to sill gasket 3/8 (9.5mm) aluminum sill 3/16 (4.7mm) pvc cap snap-on 1-3/4 (44.45mm) 1-7/64 (28mm) 10 FULL SCALE EXCEPT AS NOTED. VISIT FOR FULL WARRANTY INFO. Copyright 2016 DS Group & DraftSeal PVC substrate cover 6 (152.5mm) 7-1/2 (190.3mm) 9/16 (14mm) thickness PRODUCT # DESCRIPTION DS750AVT36316CUT Storm sill inswing, aluminum mill finish, vinyl cap tan, cut length 7-1/2 x 36-3/16 DS750AVT150 Storm sill inswing, aluminum mill finish, vinyl cap tan, 7-1/2 x 150 DS750AVB36316CUT Storm sill inswing, aluminum mill finish, vinyl cap brown, cut length 7-1/2 x 36-3/16 DS750AVB150 Storm sill inswing, aluminum mill finish, vinyl cap brown, 7-1/2 x 150 Apply silicon caulking around neoprene sill end plugs before inserting into end of sill DS750DVB36316CUT Storm sill inswing, aluminum bronze anodized, vinyl cap brown, cut length 7-1/2 x 36-3/16 DS750DVB150 Storm sill inswing, aluminum bronze anodized, vinyl cap brown, 7-1/2 x /4 (31.75mm) DS7501DVT150 Storm sill inswing, aluminum bronze anodized, vinyl cap tan, 7-1/2 x 150 A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product.

11 DS1 Storm - Sill System (SG), Inswing Pre-hung Door Application 8-1/2 (215.7mm) Sill: One piece sill, no detachable nose extension Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant 1-3/4 (44.45mm) 3/4 (19mm) 5/8 (15mm) 3/8 (9.5mm) DS167 Optional rain drip aluminum sill jamb to sill gasket After jamb, gasket and sill are assembled, caulking is still required along the top edge of sill (inside to outside) where it meets the jamb. Warranty is void if caulking is not applied properly. 3/16 (4.7mm) 1-3/4 (44.45mm) 1-7/64 (28mm) pvc cap snap-on PVC substrate 6 (152.5mm) 8-1/2 (215.7mm) cover 9/16 (14mm) thickness PRODUCT # DESCRIPTION DS850AVT3631CUT Storm sill inswing, aluminum mill finish, vinyl cap tan, cut length 8-1/2 x 36-3/16 DS850AVT150 Storm sill inswing, aluminum mill finish, vinyl cap tan, 8-1/2 x 150 DS850AVB36316CUT Storm sill inswing, aluminum mill finish, vinyl cap brown, 8-1/2 x 36-3/16 DS850AVB150 Storm sill inswing, aluminum mill finish, vinyl cap brown, 8-1/2 x 150 Apply silicon caulking DS850DVB36316CUT Storm sill inswing, aluminum bronze anodized, vinyl cap brown, cut length 8-1/2 x 36-3/16 around neoprene sill end plugs before inserting DS850DVB150 Storm sill inswing, aluminum bronze anodized, vinyl cap brown, 8-1/2 x /4 into end of sill (57mm) A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. Copyright 2016 DS Group & DraftSeal FULL SCALE EXCEPT AS NOTED. VISIT FOR FULL WARRANTY INFO. 11

12 DS1 Storm - Sill System (OS), Millenium Series PVC Outswing, Pre-hung Door Application Extruded aluminum sill with 7 slope Screw ports for fastening door jamb to end of sill or fasten into end wood plugs Extruded PVC interior threshold (tan colour) Kerf inserted continuous cornering weatherseal (DS420) NOT INCLUDED with sills. ORDER SEPARATELY Single or double door application For 4-9/16 (116mm) Jamb 3-19/32 (91mm) 2-13/32 (61mm) Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant Outswing Sill (DS2758AVT) Tested with DS347N / DS181 Series (Thermally Broken) Astragal DS181 EXTERIOR SIDE DS420 PVC 1-11/16 (43mm) ACTIVE DOOR OUTSWING door thickness 1-3/4 (44.45mm) INACTIVE DOOR 6 (152mm) DS2558AVT150 Mill finish with tan pvc, 150 (3810mm) length DS2558AVB150 Mill finish with brown pvc, 150 (3810mm) length DS2558DVB150Bronze anodized with brown pvc, 150 (3810mm) length DS420 INTERIOR SIDE For 6-9/16 (167mm) Jamb 4-13/32 (112mm) EXTERIOR gasket under cup rim included DS420 PVC 1-11/16 (43mm) DS2636 Flushbolt cup 8 (203mm) DS2758AVT150 Mill finish with tan pvc, 150 (3810mm) length DS2758AVB150 Mill finish with brown pvc, 150 (3810mm) length DS2758DVB150 Bronze anodized with brown pvc, 150 (3810mm) length All sills on this page require notching (by prehanger) for the DS420 continuous cornering weatherseal For 7-1/4 (184mm) Jamb 5-3/32 (129mm) NO SCALE DS420 PVC 1-11/16 (43mm) 8-5/8 (219mm) DS2858AVT150 Mill finish with tan pvc, 150 (3810mm) length DS2858AVB150 Mill finish with brown pvc, 150 (3810mm) length DS2858DVB150 Bronze anodized with brown pvc, 150 (3810mm) length After jamb, gasket and sill are assembled, caulking is still required along the top edge of sill (inside to outside) where it meets the jamb. NO SCALE NO SCALE Warranty is void if caulking is not applied properly. DS2858GASKET Sill to jamb gasket, adhesive both sides. Peel tape off both sides of gasket before assembly. Gasket may be trimmed to fit all sills on this page. A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. 12 FULL SCALE EXCEPT AS NOTED. VISIT FOR FULL WARRANTY INFO. Copyright 2016 DS Group & DraftSeal

13 DS1 Storm - Sill System (OS), Millenium Series Oak Top Outswing, Pre-hung Door Application Extruded aluminum sill with 5 slope Oak interior threshold Kerf inserted continuous cornering weatherseal (DS420) NOT INCLUDED with sills. ORDER SEPARATELY Single or double door application Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant For 4-9/16 (116mm) Jamb DS /32 (61mm) After jamb, gasket and sill are assembled, caulking is still required along the top edge of sill (inside to outside) where it meets the jamb. Warranty is void if caulking is not applied properly. 1-11/16 (43mm) NO SCALE 5-7/8 (149mm) DS2578AOAK150 Mill finish, 150 (3810mm) length DS2578DOAK150 Bronze anodized, 150 (3810mm) length For 6-9/16 (167mm) Jamb DS /32 (112mm) DS2858GASKET Sill to jamb gasket, adhesive both sides. Peel tape off both sides of gasket before assembly. Gasket may be trimmed to fit all sills on this page. All sills on this page require notching (by prehanger) for the DS420 continuous cornering weatherseal 1-11/16 (43mm) 7-7/8 (200mm) DS2778AOAK150 Mill finish, 150 (3810mm) length DS2778DOAK150 Bronze anodized, 150 (3810mm) length For 7-1/4 (184mm) Jamb 5-3/32 (129mm) DS /16 (43mm) NO SCALE 8-5/8 (219mm) DS2858AOAK150 Mill finish, 150 (3810mm) length DS2858DOAK150 Bronze anodized, 150 (3810mm) length DS420 For 8-3/4 (222mm) to 9-1/2 (241mm) Jamb DS /2 (241mm) DS2912AOAK150 Mill finish, 150 (3810mm) length DS2912DOAK150 Bronze anodized, 150 (3810mm) length 6 (152mm) 1-11/16 (43mm) A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. Copyright 2016 DS Group & DraftSeal HALF SCALE EXCEPT AS NOTED. VISIT FOR FULL WARRANTY INFO. 13

14 DS2 Storm - Sill System, Outswing Pre-hung Door Application For 6-9/16 (167mm) Jamb, no flushbolt channel 6-9/16 (167mm) 4-13/32 (112mm) DS259EXTAE169 nose extenstion, 5 slope 1-3/4 (44.5mm) 8-9/16 (217mm) DS6999AVT150 Extruded aluminum sill, mill finish with PVC interior cap, tan, 150 (3810mm) length only ALL DRAWINGS NO SCALE 14 Copyright 2016 DS Group & DraftSeal

15 DS2 Storm - Sill System, Outswing Pre-hung Door Application Integrated with the DSF2 Accordion Pleated Hideaway Insect Screen (optional) For 6-9/16 (167mm) Jamb 6-9/16 (167mm) DS421 weatherseal, 4-13/32 (112mm) DS259EXTAE169 nose extenstion, channel for flushbolt cup STANDARD SILL 5 slope 8-9/16 (217mm) DS6989AVT150 Extruded aluminum sill, mill finish with PVC interior cap, tan, 150 (3810mm) length only NO SCALE DS725FBCUPSETT Flushbolt cup for double door For 6-9/16 (167mm) Jamb Integrated with the DSF2 Accordion Pleated Hideaway Insect Screen (optional) DS421 weatherseal, 6-9/16 (167mm) 4-13/32 (112mm) DS259EXTAE169 nose extenstion, channel for flushbolt cup 5 slope SILL WITH TRACK SYSTEM FOR ACCORDION PLEATED HIDEAWAY INSECT SCREEN 8-9/16 (217mm) DS6989AVT150TRACK Extruded aluminum sill, mill finish with PVC interior cap, tan, with built in track for the DSF2 Integrated Accordion Pleated Hideaway Insect Screen System, 150 (3810mm) length only FULL SCALE EXCEPT AS NOTED 1-3/4 (44.5mm) 1-3/4 (44.5mm) Copyright 2016 DS Group & DraftSeal 15

16 DS2 Storm - Sill System, Outswing Pre-hung Door Application Integrated with the DSF2 Accordion Pleated Hideaway Insect Screen (optional) For 6-9/16 (167mm) Jamb DS421 weatherseal, 7-1/4 (184mm) 5-1/8 (130mm) DS259EXTAE169 nose extenstion, channel for flushbolt cup STANDARD SILL 5 slope 9-1/4 (235mm) DS9014AVT150 Extruded aluminum sill, mill finish with PVC interior cap, tan, 150 (3810mm) length only NO SCALE For 6-9/16 (167mm) Jamb Integrated with the DSF2 Accordion Pleated Hideaway Insect Screen (optional) DS725FBCUPSETT Flushbolt cup for double door DS421 weatherseal, 7-1/4 (184mm) 5-1/8 (130mm) DS259EXTAE169 nose extenstion, channel for flushbolt cup 5 slope SILL WITH TRACK SYSTEM FOR ACCORDION PLEATED HIDEAWAY INSECT SCREEN 9-1/4 (235mm) DS9014AVT150TRACK Extruded aluminum sill, mill finish with PVC interior cap, tan, with built in track for the DSF2 Accordion Pleated Hideaway Insect Screen, 150 (3810mm) length only FULL SCALE EXCEPT AS NOTED 1-3/4 (44.5mm) 1-3/4 (44.5mm) 16 Copyright 2016 DS Group & DraftSeal

17 DS2 Storm - Sill System, Outswing Pre-hung Door Application Integrated with the DSF2 Accordion Pleated Hideaway Insect Screen (optional) For 4-9/16 (116mm) Jamb DS259EXTAE169 nose extenstion, DS421 weatherseal, channel for flushbolt cup 4-9/16 (116mm) 2-31/64 (63mm) 1-3/4 (44.5mm) 5 slope 6-9/16 (167mm) DS4969AVT150 Extruded aluminum sill, mill finish with PVC interior cap, tan, 150 (3810mm) length only. NO SCALE Nose extension for DS4969, DS6989 & DS9014 DS725FBCUPSETB Cup for inswing or outswing sill, double doors, brown DS725FBCUPSETT tan DS725FBCUPSETW white 11/16 18mm) DS259EXTAE169 Extruded aluminum, mill finish, 169 (4292mm) length only. 7/8 (22mm) Warranty void if all sill noses are not secured to all DS2 Storm sills as shown. For 6-9/16 (167mm) Jamb DS259EXTAE169 nose extenstion, 5 slope 2-9/64 (54mm) channel for flushbolt cup DS421 weatherseal, OAK TOP 4-13/32 (112mm) OAK TOP NO SCALE 11/16 (17.50mm) 1-3/4 (44.5mm) 1-1/16 (27mm) 8-9/16 (127mm) DS2999AOAK150 Extruded aluminum sill, mill finish with interior oak cap & built in track for DSF2 Accordion Pleated Hideaway Screen. For 6-9/16 (167mm) Jamb 3-7/16 (88mm) 4-13/32 (112mm) DS421 weatherseal, OAK TOP OAK TOP NO SCALE 11/16 (17.50mm) 1-3/4 (44.5mm) 1-1/16 (27mm) 7-7/8 (200mm) DS2799AOAK150 Extruded aluminum sill, mill finish with interior oak cap & built in track for DSF2 Accordion Pleated Hideaway Screen. FULL SCALE EXCEPT AS NOTED Copyright 2016 DS Group & DraftSeal 17

18 DS1 Storm - Sill System & DSF1 Insect Screen FOR INSWING DOORS The DSF1 Accordion Screen: The first Integrated Pleated Hideaway Insect Screen System for single or double doors, that is built into the inswing pre-hung door unit at the door shop & shipped as a complete assembly to the job site. Aluminum or PVC brick mould housing for pleated screen TOP CORNER DETAIL The aluminum or PVC brick mould enables the pleated screen to neatly fold away & not be seen when not in use. The pull bar has a pull tab that allows you to effortlessly slide the pleated screen across the opening. Screen will not fly back open when pull tab is released. pull tab on pull bar PATENT PENDING open Aluminum or PVC brick mould housing for pleated screen closed PATENT PENDING BOTTOM CORNER DETAIL EXTERIOR SIDE, INSWING DOORS DS1 Storm Sill (inswing) with built-in track & nose extension for the DSF1 Accordion Pleated Hideaway Insect Screen The DSF1 Screen System is designed for new construction but can also be used in the renovation market. The old door & jamb can be replaced with a pre-hung door unit utilizing the DS1 Storm - Sill System & the DSF1 Screen System. Brick mould screen frame, brown or white Standard or custom sizes DSF1 Pleated insect screen is easily replaceable if damaged Single or double inswing door openings Screen will fit either 6-9/16 (167mm) or 7-1/4 (184mm) jamb Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant ALL DRAWINGS NO SCALE 18 Copyright 2016 DS Group & DraftSeal

19 DS2 Storm - Sill System & DSF2 Insect Screen FOR OUTSWING DOORS The DSF2 Accordion Screen: The first Integrated Pleated Hideaway Insect Screen System for single or double doors, that is built into the outswing pre-hung door unit at the door shop & shipped as a complete assembly to the job site. EXTERIOR SIDE, OUTSWING DOOR pull tab on pull bar open INTERIOR SIDE, OUTSWING DOOR INTERIOR SIDE, OUTSWING DOOR closed DS1 Storm Sill (outswing) with built-in track for the DSF1 Accordion Pleated Hideaway Insect Screen The DSF2 Screen System is designed for new construction but can also be used in the renovation market. The old door & jamb can be replaced with a pre-hung door unit utilizing the DS2 Storm - Sill System & the DSF2 Screen System. Standard or custom sizes DSF2 Pleated insect screen is easily replaceable if damaged Single or double inswing door openings Screen will fit either 6-9/16 (167mm) or 7-1/4 (184mm) jamb ALL DRAWINGS NO SCALE Sill System Testing Was Performed In Accordance With AAMA / WDMA / CSA 101 / I.S. 2A NAFS 11 Compliant Copyright 2016 DS Group & DraftSeal 19

20 DSF1 Pleated Hideaway Insect Screen for Inswing Doors DSF2 Pleated Hideaway Insect Screen for Outswing Doors EXTERIOR SIDE, INSWING DOORS INTERIOR SIDE, OUTSWING DOOR Tomorrow s Innovative Solutions for Today s Doors & Windows The DS Group Of Companies: Draftseal, Kristrack, Eclipse Architectural & DSD Hardware Head Office & Manufacturing Centre, Vancouver, Canada 7470 Buller Avenue, Burnaby, B.C. V5J 4S5 Canada Phone: (604) Fax: (604) info@thedsgroup.com Outside Vancouver, B.C., please use our toll free numbers: Phone: Fax: Branch Office & Distribution Centre, Toronto, Canada Phone head office toll free for branch address Branch Office & Distribution Centre, Los Angeles, California Phone head office toll free for branch address Eclipse Architectural Corporate Showrooms Vancouver & Toronto, Canada Los Angeles, California, USA THE DS GROUP IS THE BRAND IMAGE OF A.K. DRAFT SEAL LTD.