SPARE PARTS AND ATTACHMENT FOR MULTISPINDLE MACHINES

Transcription

1 TURLO S.r.l. Via Monte Rosa VARALLO SESIA (VC) ITALY Tel (0039) Fax (0039) mail@turlo.it website: SPARE PARTS AND ATTACHMENT FOR MULTISPINDLE MACHINES GITAL Attachments and spare parts Ersatzteile und Einrichtungen Dispositivos y Repuestos Edizione catalogo / Catalogue issue: 07/2017 Tutti gli articoli meccanici sono di produzione della TURLO S.r.l. All the mechanical parts in this catalogue are made by TURLO S.r.l.

2 CROSS SLIDE TOOL-HOLDERS x12 tool-holder pos.6 cut-off turret pos.6 reprise tool-holder pos turret pos.6 blade-holder pos.3 reprise tool-holder

3 FRONT ROTATING SPINDLE MANDRINO FRONTALE ROTANTE FRONTALSPINDEL BROCHE FRONTALE TOURNANTE MANDRIL FRONTAL ROTATIVO high pressure coolant version versione con lubrificazione forzata

4 FRONTAL DRILL-HOLDERS ISO25 - ESX ISO25 - ESX ISO25 - ESX20 Special extension on demand

5 THREAD MAKER UNIT GRUPPO FILETTATORE GEWINDESCHNEIDEGRUPPE GROUPE DE TARUDAGE GRUPO ROSCADOR

6 THREADING EQUIPMENT FOR TAP OR DIE-HOLDER GRUPPO PORTAMASCHIO/PORTAFILIERA GEWINDEFERTIGUNG MIT GEWINDEBOHRER DISPOSITIF DE FILETAGE AVEC TARAUD ET FILIERE DISPOSITIVO PARA ROSCAR CON MACHO/HILERA

7 POS.6 HYDRAULIC PICK-UP ATTACHMENT MANDRINO DA RIPRESA IDRAULICO POS.6 ABGREIFSPINDELEINRICHTUNG POS.6 BROCHE DE REPRISE POS.6 MANDRIL DE REPASAR POS.6 This is the last version of pick-up spindle, it has both clamping and unclamping by hydraulic. The pick-up attachment is used on cutting-off position frontal slide. Its spindle rotates at the same speed than the bar, it clamps the part with the collet during the cutting-off. Still with the part in the collet, it goes backward, allowing the positioning of the reprise tool-holder in front. Going forward against the reprise tool it makes the finishing of the part on the back side. The last phase is the opening of the collet and the expulsion of the part. The opening and closing of the collet is fully hydraulic. We can supply the hydraulic unit in case it is missing in the machine. We can supply new complete attachments or spare parts for your original attachments or we can rebuild your old attachments

8 POS.6 MECHANICAL/HYDRAULIC PICK-UP ATTACHMENT MANDRINO DA RIPRESA POS.6 MECCANICO/IDRAULICO ABGREIFSPINDELEINRICHTUNG POS.6 BROCHE DE REPRISE POS.6 MANDRIL DE REPASAR POS.6 This is the first version of pick-up spindle, it has mechanical clamping by spring washers and unclamping by hydraulic. The pick-up attachment is used on cutting-off position frontal slide. Its spindle rotates at the same speed than the bar, it clamps the part with the collet during the cutting-off. Still with the part in the collet, it goes backward, allowing the positioning of the reprise tool-holder in front. Going forward against the reprise tool it makes the finishing of the part on the back side. The last phase is the opening of the collet and the expulsion of the part. The opening and closing of the collet is fully hydraulic. We can supply the hydraulic unit in case it is missing in the machine. We can supply new complete attachments or spare parts for your original attachments or we can rebuild your old attachments

9 POS.6 PICK-UP SPINDLE STOPPING ATTACHMENT FRENO PER MANDRINO DA RIPRESA STILLSETZEINRICHTUNG FUER ABGREIFEINRICHTUNG POS.6 DISPOSITIF D'ARRÊTAGE DE BROCHE DE REPRISE POS.6 RETÉN PARA MANDRIL DE REPASAR POS.6

10 SYNCHRO BROACHING ATTACHMENT APPARECCHIO BROCCIATORE SINCRONO MEHRKANTSTOBENRICHTUNG APPAREIL Á MORTAISER (ETAMPER) BROCIADOR BROCHADOR

11 FRONTAL MILLING ATTACHMENT FRESATORE FRONTALE FRONTAL FRAESEINRICHTUNG APPAREIL A FRAISER FRONTAL Siamo in grado di fornire l'apparecchiatura nuova, copia dell'ultima versione GR0 Saco. Ogni singolo componente è intercambiabile con quelli originali, ciò ci permette di revisionare i vostri fresatori Saco o semplicemente fornirvi i ricambi per farlo. E' possibile la registrazione trasversale del pacco fresa di +/-0,5mm, senza più doverlo smontare per sostituire i distanziali. We can supply the complete new attachment, based on GR0 Saco model. Every single part is intercheangeble with original ones, and that allows us to repair old original units with our spare parts. We supply the latest model, in which it is possible to adjust the cross position of the milling disk, without taking it off. CARATTERISTICHE TECNICHE - posizioni di montaggio / mounting positions - velocità massima del mandrino / max machine rpm - distanza massima tra pinza e fresatore / max distance betwee collet and milling unit - Corsa massima / max stroke - diametro massimo di fresa / max milling disk dia. - diametro massimo del pezzo /max part dia. - rapporto di fresatura / milling ratio: tutte / all 5000 rpm 99mm 35mm 63mm 18mm 0,267

12 CAM pinza mandrino da ripresa pick-off collet chuck finger pinza spingibarra collet pinza stringibarra

13 NEW BAR CLAMPING MECHANISM OLD BAR CLAMPING MECHANISM

14 chuck finger pinza spingibarra standard 31 sp m indle s ac hine / m top ma a c hine cchina stan d / macc hina s ar d top ma ndrino stand a.279 spind r d machin le sto e p ma / macchin chine / mac a st andar d china stop m andrin o collet pinza stringibarra

15 x molla a tazza 2x belleville washer

16 L=38.5mm L=51.5mm

17 NEW VERSION OLD VERSION Ortlinghaus pick-off collet Pick-off spindle brake

18 BIELLA DI SPINTA CON COMPENSAZIONE ELASTICA pos pos.3 slitta standard pos.3 slitta stretta pos.6 taglio pos.6 slitta da ripresa pos pos pos pos pos pos pos OPTIONAL RATIO GEARS FOR HIGH SPEED DRILLING AND BORING

19

20 pos pos pos pos cross chariot / carri radiali cross chariot / carri radiali axial spindle and chariot / mandrini e carri assiali axial spindle and chariot / mandrini e carri assiali

21 OPTIONAL: COMANDO SLITTA ASSIALE POS.1 / PUSHING SET FOR AXIAL SLIDE POS COMANDO SLITTA ASSIALE POS.2 / PUSHING SET FOR AXIAL SLIDE POS COMANDO SLITTA ASSIALE POS.4 / PUSHING SET FOR AXIAL SLIDE POS COMANDO SLITTA ASSIALE POS.5 / PUSHING SET FOR AXIAL SLIDE POS pos pos pos pos pos pos

22 COMANDO SLITTA ASSIALE POS.1 / PUSHING SET FOR AXIAL SLIDE POS COMANDO SLITTA ASSIALE POS.2 / PUSHING SET FOR AXIAL SLIDE POS COMANDO SLITTA ASSIALE POS.4 / PUSHING SET FOR AXIAL SLIDE POS COMANDO SLITTA ASSIALE POS.5 / PUSHING SET FOR AXIAL SLIDE POS pos.1 pos.2 pos.4 pos pos.1 pos.2 pos.4 pos.5 pos.1 pos.2 pos.4 pos

23 CROSS MARKING ATTACHMENT SIGNIEREINRICHTUNG MARQUAGE TANGENTIEL MARCADORES This attachment is used to mark the components in a very simple and quick way, it is based on a completely mechanical logic. With our attachment on, the cross slide moves forward till the engraved disk hits the component. Because of the friction between them, the disk starts to turn and mark the component. After one rotation engraving is over and a locking pin stops the disk in a special position, where it cannot touch the component again. When cross slide returns back, a proper pin, fixed on the wall of the machine, unlocks the disk, and the spring takes it to its start position. We can supply blank disks or engraved disk, following customer's requirements. The same attachment can be taken apart and re-assembled the other way round in order to fit all station of the machine. Now it is also possible to fit a disk with interchangeable letters. The new roller with interchangeable characters