ROTARY TABLES & INDEXERS. Haas Automation Inc.

Transcription

1 R ROTRY TLES & INDEXERS Haas utomation Inc.

2 in the beginning... In 1983, Haas utomation, Inc., developed the first fully programmable 5 collet indexer. uilt with quality materials and engineered to be dependable and highly accurate, the unit was a tremendous success. y closing the gap between cumbersome, manually operated indexers and very expensive true 4th-axis machining centers, Haas established itself as an industry leader in automated 4th-axis parts positioning. y assisting industry in the quest to increase productivity through automation, Haas has become merica s leading builder of machine tools and rotary tables. fter nearly three decades of ongoing refinement and development, Haas rotary products continue to dominate the industry with quality craftsmanship, dependable operation, and affordable prices. Today, Haas manufactures more than 35 models of rotary tables and indexers that deliver the same high quality and extremely accurate performance that is the Haas made-in-merica trademark. The full line of Haas rotary products includes many specialized units designed for maximum productivity. From the multi-head H5s to tilting T5s and dual-axis trunnion models, Haas continues to lead the way to higher productivity through automation. Haas rotary products are built from top-quality materials, and undergo constant re-engineering and refinement to offer only state-of-the-art technology. onstructed of heavy-duty materials and designed for dependable day-in, day-out operation, Haas rotary products are the benchmark by which all others are measured. Take a close look at the components that go into our rotary tables. Haas manufactures all critical components in-house at our modern alifornia manufacturing facility. y controlling the machining process, we re able to deliver the quality and accuracy our customers demand. One example of this is the indexing accuracy of our rotary tables. t the core of every Haas rotary table is a large-diameter, aluminum-bronze worm gear meshing with a ground alloy steel worm (hardened to 60 Rc) submerged in a synthetic oil bath. The secret to Haas indexing accuracy is cutting the worm gear while it s attached to the spindle, rather than assembling the finished worm gear to the spindle, as other rotary table manufacturers do. Each assembled spindle is individually trammed-in on a N gear hobber to a maximum 2-micron runout, and then the worm gear is precision cut. This process guarantees the utmost concentricity between the large-diameter ball bearings and the worm gear, ensuring many years of smooth, extremely accurate, and bind-free operation. This is just one of the many quality designs that go into every Haas product. ONTENTS Servo ontrol 2-3 Ultra-ompact Rotary 4 H5 5-7 HRT 8-9 HRT SP Series HRT SHS, 320F, HIT HRT Dual Platter HRT Series TRT Trunnion T H2TS 24 Tailstocks Quikhange System ccessories 30-32

3 solid, robust design Fast lignment ll Haas rotary tables and tailstocks have precision alignment keys that are parallel to and centered on the spindle. When used on Haas VMs with their precision T-slots, you can bolt on a rotary product without the need to indicate the table in. (Not shown) 1 Main ody lass 30 iron is used for its superior damping qualities. Extremely rigid, it damps vibration and deflects machining forces. Machined by Haas in only two operations on FMS machinery. 2 2 Turntable Platter Haas uses only 4140 alloy steel, heat-treated to Rc, for our platters. Machined and rotary ground in-house, they deliver superior strength and durability. 3 earings Two pre-loaded, deep-groove radial bearings withstand loads up to 31,000 lb. y supporting the worm gear on both sides with these massive bearings, Haas is able to deliver superior performance and dependable operation. 4 Worm Gear Haas large-diameter aluminum-bronze worm gear is hobbed on a N gear hobber and inspected on a Wenzel WGT500 N gear analyzer. 5 Worm Drive Shaft Our drive shafts are made of 8620 steel hardened to 60 Rc. They are N precision-ground, and then inspected to a 2-micron runout on a Wenzel WGT500 N gear analyzer. 6 rake Disc Our brake discs are made from 4140 chromoly steel heat treated to Rc. The thrust-bearing surface on the brake is rotary ground to further enhance wear resistance. Specially-designed seals provide protection from the elements, while reducing the drag commonly associated with compression seal designs. 3 7 Motor Enclosure The motor enclosure features heavy-gauge steel, with special closed-cell foam gaskets to maintain a watertight assembly. Nickel plated for protection

4 The Haas Servo ontrol t the heart of all Haas rotary products is the Haas Servo ontrol. Refined by nearly three decades of development, it offers the utmost in versatility, coupled with fast, easy, flexible programming. The Haas control always incorporates the latest high-speed microprocessor and drive technology. Haas exclusive software replaces failure-prone mechanical components, and includes a self-diagnostic subroutine that maximizes uptime. single circuit board controls all main functions. When used with any N machining center, the control performs as a semi-4th axis, activated by a single M code. Easy interfacing, fast set up, and low cost make Haas the perfect alternative to cumbersome, high-priced, offshore 4th-axis machines. The control s standard features make it is easy to machine odd-number bolt circles or uneven hole spacing using only simple programming. You can program the control to rotate the spindle in either direction, in step sizes from to There can be up to 99 different steps in memory, and each step can be repeated (or looped) up to 999 times. The memory is non-volatile, so programs are fully retained, even when the power is turned off. You may store up to 10 separate programs. You can easily achieve three times the performance of a manual device with a Haas control operating the rotary table of your choice. dd to this built-inthe-us Haas quality and reliability, and your decision becomes very simple. Haas has the solutions you need. SOL Dimensions (Inches Millimeters) SOL Depth = 14" (356 mm); additional depth required for cable connections. Fast, easy, flexible programming Simple N interfacing via M code Variable feedrates Linear, arc & spiral milling Fast setups High accuracy & repeatability bsolute or incremental programming utomatic circle division Non-volatile program storage RS-232 interface Operates on 110 to 120 V power 12-month limited warranty Made in the US 2

5 The Rotary Interface H aas rotary products can be interfaced to virtually any type of machine. There are three distinct methods of interfacing listed below, each with different been successfully interfaced to a wide variety of machines over the years. Haas utomation s Service Department can provide expert advice on the best capabilities. Thousands of Haas rotary products have interface for any application. True 4th-xis * Direct ontrol Via Host Machine This method does not use the Haas Servo ontrol unit; instead, an amplifier built into the host machine provides power and true multi-axis simultaneous motion control. ll Haas machining centers can be fitted with additional amplifiers that work with offthe-shelf Haas rotary products. With this method, the rotary axis is programmed and controlled directly by the host control just like the X, Y, and Z axes. Notes: The Haas Servo ontrol can also be interfaced to PL units and computers for general-purpose use. Please contact Haas utomation for details. *The term 4th axis is used as a general description. Unit may operate as any axis, depending on host machine. 4th-xis ontrol Via RS-232 Port This method requires use of a Haas Servo ontrol unit and a host machine capable of sending data via an RS-232 line. It also requires macro function capability, an external M-code controlled relay, and an M-FIN connection. Programming is still done at the N control. Semi 4th-xis ontrol Via N Interface able This method requires use of a Haas Servo ontrol unit and a host machine capable of closing a relay (or switch). Most N machine tools are equipped with spare M codes, which can be used to close a relay. Indexing commands are stored only in the Servo ontrol s program memory. Each pulse of the host machine s relay triggers the Servo ontrol to index to its next programmed position. fter finishing the index, the Servo ontrol signals that it has finished and is ready for the next pulse. Fully-synchronized multi-axis motions cannot be performed with this method. This method can be used with machine tools that have no controls. Diagram of ontrol Indexer Interface YOUR MHINE M FUNTION RELY +24 VOLTS M FIN SIGNL YOUR N MILL N INTERFE LE 4th-axis ordering information SERVO ONTROL INDEXER / ROTRY TLE INDEXER ONTROL LE 680 OHM YLE FINISH RELY HS H5 INTERNL YLE STRT +12 VOLTS When ordering a Haas rotary table or indexer for use on a Haas machining center with a built-in 4th- and/or 5th-axis drive, it is not necessary to purchase the Haas Servo ontrol unit. However, we suggest you purchase the Servo ontrol so you can use your rotary table on other machines. efore placing your order, please discuss with your Haas distributor the make and model of N machine on which you intend to use your new rotary table PIN DIN ONNETOR RER OF ONTROLLER 1 2 3

6 Ultra-compact 110 Series The HRT110 is a single-axis rotary table driven by an 80:1 harmonic drive system coupled to a powerful brushless servomotor to provide indexing speeds up to 300 /sec, and spindle torque of 65 ft-lb. Smaller than a 7" cube and weighing just 29 lb, the HRT110 rotary table provides accurate positioning and simultaneous 4-axis motion for machining small parts. SPINDLE HRT110 Torque 65 ft-lb 88 Nm Runout Max 0.001" 0.03 mm acklash Speeds 30 arc-sec to 300 /sec Tooling 3 olt Patterns x 6 rake Torque psi bar enter Height 3.000"± mm ±0.03 INDEXING 1 ccuracy Repeatability ±45 arc-sec 10 arc-sec Resolution Max Rotation/Step MOTOR Gear Ratio OPERTING SPEIFITIONS 80:1 Harmonic Drive Duty ycle full/low speed 50%/100% Operating Temp. (max ambient) 100 F 38 Power Required (V) Max ir Pressure 60 psi 4.1 bar PLTTER apacity 20 lb 9.1 kg Platter Diameter WEIGHT 4.3" 110 mm Table 29 lb 13.2 kg rushless ontrol 14.2 lb 6.4 kg The TR110 dual-axis trunnion table provides accurate positioning and full 5-axis motion for machining small parts. Its small size and light weight make the TR110 the perfect 5-axis solution for even the smallest machining centers. Indexing speeds up to 300 /sec ensure fast cycle times. TR110 Rotary axis Tilt axis SPINDLE Torque 65 ft-lb 88 Nm 65 ft-lb 88 Nm Runout Max 0.001" 0.03 mm N/ acklash 30 arc-sec 30 arc-sec Speeds to 300 /sec to 300 /sec rake Torque 40 psi) 2.8 bar) INDEXING 1 ccuracy ±45 arc-sec ±45 arc-sec Repeatability 10 arc-sec 10 arc-sec Resolution Max Rotation/Step ±120 MOTOR Gear Ratio 80:1 Harmonic Drive 80:1 Harmonic Drive OPERTING SPEIFITIONS Duty ycle full/low speed 50% / 100% Operating Temp. (max ambient) 100 F 38 Power Required (V) 1-axis control Power Required (V) 2-axis control Max ir Pressure 60 psi 4.1 bar PLTTER Part Swing (max) 7.35" mm apacity 20 lb 9.1 kg Platter Diameter 4.3" 110 mm WEIGHT Table 85 lb 39 kg rushless ontrol 23.1 lb (2-axis) 14.2 lb (1-axis) 10.5 kg (2-axis) 6.4 kg (1-axis) 1 See page 36. Due to continual development, all machine specifications are subject to change. Product dimensions available online at 4

7 High-Speed 5 ollet Indexer Our Super-High-Speed 5 ollet Indexer The Haas H5S collet indexer reduces cycle times and positions parts at 725 /sec High-torque brushless servo 725 /second feedrates Simple bolt-on mounting Reduces cycle times Speeds drill & tap operations High-speed engraving 20 ft-lb spindle torque H5 Series Part # H5S Description Super-High-Speed Servo Indexer w/manual Handle ollet loser Dimensions are the same as the H5 (see page 6). H5 S SPINDLE Torque 20 ft-lb 27 Nm Runout Max " mm acklash 40 arc-sec Speeds to 725 /sec ollets std 5 ( 1 /64" -1 1 /16") std 5 (0.4 to 27 mm) Nose Thread 2 3 /16" -10 enter Height 4.000" ± mm ±0.03 INDEXING 1 ccuracy ±30 arc-sec Repeatability 10 arc-sec Resolution Max Rotation/Step Worm Gear Diameter 2.8" 71 mm MOTOR Gear Ratio (worm & gear) 33:1 OPERTING SPEIFITIONS Duty ycle* full speed Operating Temp. (max ambient) 100 F 38 Power Required (V) Max ir Pressure (air collets) 120 psi 8.3 bar WEIGHT Rotary Head 48 lb 21.8 kg rushless ontrol 14.2 lb 6.4 kg *Without tailstock. 1 See page 36. Due to continual development, all machine specifications are subject to change. See next page for standard 5-series indexers 5

8 Standard H5 Series The Haas H5 series is the ideal choice for holding smaller parts. lamp your parts using standard 5 collets, or chuck them by threading a 3-jaw chuck to the 2 3 / 16 "-10 spindle nose. ollets can be closed with your choice of a manual handle or an optional air collet closer. The H5 series is easy to program, interface, and set up. Haas own precision in-house manufacturing and machining processes ensure high quality and years of dependable operation. With nearly three decades of refinement, the Haas H5 is the industry benchmark for quality, accuracy, and dependability. High-Productivity Multi-Spindle Indexers y spacing the heads as close together as possible, Haas is able to obtain the most cost-effective multispindle designs on the market today. In higher-volume applications, loading multiple parts saves tool changes and reduces rapid-movement times, allowing your machine to run longer between part loadings. Together, these time savings add up to substantially increased profits. H5 Series ID. Part # Description. H5 Servo Indexer w/manual ollet loser. H5 2* Dual-Spindle Servo 5 System. H5 3HD* Triple-Spindle Servo 5 System D. H5 4HD* Quad-Spindle Servo 5 System *Note: Multi-head indexers are not designed to be used with spindles in the vertical position. Specifications and Dimensions LOTING PINS on base: Ø0.6250" ( ") x 0.35" deep mm ( mm) x 8.9 mm deep H5 Single Spindle D M Dimensions (Inches Millimeters) D E ,8 F G 0.520/0.530 TYP 13.21/13.46 TYP H L Note: arry-handle omitted from front view G H F E Q P N J K 14' 4.3 m able J ± ±0.008 K L M ± ±0.05 N ± ±0.008 P ± ±0.03 Q ± ±0.03 D E Dimensions (Inches Millimeters) H5 Two, Three & Four Spindle H F G J L P N Q H5 2 H5 3 H D E F ± ± ± ± ± ±0.05 G 0.68 TYP 17.3 TYP 0.68 TYP 17.3 TYP 0.68 TYP 17.3 TYP H J ± ± ± ± ± ±0.05 K L M N P Q R w/ w/ w/ R K M 6

9 Features.. Uses standard 5 collets, step chucks, and closers Threaded spindle nose for chucks oolant-resistant polyurethane conduit & seals Fast, easy, flexible programming Simple N interfacing via M code Direct connection to Haas machines Variable feedrates Linear, arc & spiral milling Fast setups ccurate and repeatable. D. 12-month limited warranty Made in the US SPINDLE H5 H5 2 H5 3* H5 4* Torque 60 ft-lb 81 Nm 25 ft-lb 34 Nm 25 ft-lb 34 Nm Runout Max " mm " mm " mm acklash 40 arc-sec 50 arc-sec 50 arc-sec Speeds to 410 /sec to 200 /sec to 200 /sec ollets std 5 ( 1 /64" -1 1 /16") std 5 (0.4 to 27 mm) std 5 ( 1 /64" -1 1 /16") std 5 (0.4 to 27 mm) std 5 ( 1 /64" -1 1 /16") std 5 (0.4 to 27 mm) Nose Thread 2 3 /16" /16" /16" -10 enter Height 4.000" ± mm ± " ± mm ± " ± ±0.05 INDEXING 1 ccuracy ±30 arc-sec ±60 arc-sec ±60 arc-sec Repeatability 10 arc-sec 10 arc-sec 10 arc-sec Resolution Max Rotation/Step Worm Gear Diameter 2.8" 71 mm 2.8" 71 mm 2.8" 71 mm MOTOR Gear Ratio (worm & gear) 60:1 60:1 60:1 OPERTING SPEIFITIONS Duty ycle** full speed full speed full speed Operating Temp. (max ambient) 100 F F F 38 Power Required (V) Max ir Pressure 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar WEIGHT Rotary Head 48 lb 21.8 kg 115 lb 52.2 kg 165 lb (3HD) 74.8 kg (3HD) 225 lb (4HD) kg (4HD) rushless ontrol 14.2 lb 6.4 kg 14.2 lb 6.4 kg 14.2 lb 6.4 kg * Not for use with tailstocks. **Without tailstock. 1 See page 36. Due to continual development, all machine specifications are subject to change. 7

10 HRT Series For holding medium to large parts or fixtures, the HRT series of horizontal/vertical T-slotted rotary tables is the answer. vailable in sizes from 160 mm to 600 mm, these rugged, heavyduty tables can accommodate parts and fixtures weighing up to 1475 lb (HRT600). hucks and fixtures can easily be bolted to the table using the six precision T-slots, and large throughholes allow for bar feeding and special fixturelocating requirements. Mount horizontally or vertically Heavy-duty design Large through-holes oolant-resistant polyurethane conduit & seals Fast, easy, flexible programming Simple N interfacing via M code Direct connection to Haas machines Variable feedrates Linear, arc & spiral milling High accuracy & repeatability 12-month limited warranty Made in the US E. Specifications and Dimensions Dimensions (Inches Millimeters) HRT160 HRT210 HRT310 HRT450 HRT D E F ±0.001 ±0.03 ±0.001 ±0.03 ±0.001 ±0.03 ±0.001 ±0.03 ±0.001 ±0.03 G H Ø , , , , , , , , , , -0 J K L M N P Q E. G E D Q K F J L H 0.530" wide x 0.50" deep mm wide x 12.7 mm deep Front & Rear Tie-Down Slots M N P 8

11 Using standard T-nuts Locating Key on base: " wide mm ( ") mm by 0.225" deep 5.72 mm Minimum Dia. olt ircle: HRT " 99.6 mm HRT " mm HRT " mm HRT " mm HRT " mm HRT Series ID. Part # Description. HRT mm (6.3") Servo Rotary Table w/pneumatic rake (SS available). HRT mm (8.3") Servo Rotary Table w/pneumatic rake HRT210HS* 210 mm (8.3") Servo Rotary Table w/pneumatic rake (130 /sec). HRT mm (12.2") Servo Rotary Table w/pneumatic rake D. HRT mm (17.7") Servo Rotary Table w/hydraulic rake E. HRT mm (23.6") Servo Rotary Table w/hydraulic rake *Not Shown. D.... HRT160 (HRT160SS) HRT210 HRT210HS HRT310 HRT450 HRT600 SPINDLE Torque 150 ft-lb 203 Nm 210 ft-lb 285 Nm 105 ft-lb 142 Nm 300 ft-lb 407 Nm 400 ft-lb 542 Nm 450 ft-lb 610 Nm Runout Max " mm " mm " mm " mm " mm " mm acklash 30 arc-sec 30 arc-sec 45 arc-sec 30 arc-sec 30 arc-sec 30 arc-sec Speeds to 130 /sec (570 /sec) to 100 /sec to 130 /sec to 75 /sec to 50 /sec to 50 /sec Tooling 6 std 60 6 std 60 6 std 60 6 std 60 6 std 60 6 std 60 enter Height 5.000" ± mm ± " ± mm ± " ± mm ± " ± mm ± " ± mm ± " ± mm ±0.03 rake bar 100 ft-lb 136 Nm 200 ft-lb 271 Nm 200 ft-lb 271 Nm 500 ft-lb 678 Nm 1,800 ft-lb Nm 1,800 ft-lb Nm INDEXING 1 ccuracy ±15 arc-sec ±15 arc-sec ±20 arc-sec ±15 arc-sec ±15 arc-sec ±15 arc-sec Repeatability 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec Resolution Max Rotation/Step Worm Gear Diameter 4.7" 119 mm 6.3" 160 mm 6.3" 160 mm 9.4" 239 mm 13.5" 343 mm 13.5" 343 mm MOTOR Gear Ratio (worm & gear) 63:1 90:1 90:1 72:1 72:1 72:1 Timing elt 2:1 2:1 1:1 2:1 3:1 3.5:1 OPERTING SPEIFITIONS Duty ycle full/low speed 50% / 100% 50% / 100% 50% / 100% 50% / 100% 50% / 100% 50% / 100% Operating Temp. (max. ambient) 100 F F F F F F 38 Power Required (V) Max ir Pressure 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar WEIGHT Table 90 lb 40.8 kg 165 lb 74.8 kg 165 lb 74.8 kg 435 lb kg 850 lb kg 1,475 lb 669 kg rushless ontrol 14.2 lb 6.4 kg 14.2 lb 6.4 kg 14.2 lb 6.4 kg 14.2 lb 6.4 kg 14.2 lb 6.4 kg 14.2 lb 6.4 kg See page 36. Due to continual development, all machine specifications are subject to change. 9

12 HRT SP Series The HRT SP series gives you the same features and benefits as the standard HRT series, but the motor is wrapped behind the table to provide a substantially shorter overall length, and help you fit a lot of table into a small work envelope. (vailable with 1-6 platter on the HRT210SP, and 1-5 platter on the HRT160SP, for a slight additional cost.) HRT SP Series ID. Part # Description. HRT 160SP 160 mm (6.3") Servo Rotary Table w/motor in ack. HRT 210SP 210 mm (8.3") Servo Rotary Table w/motor in ack. HRT 310SP 310 mm (12.2") Servo Rotary Table w/motor in ack Specifications and Dimensions Heavy-duty design oolant-resistant polyurethane conduit & seals Fast, easy, flexible programming Simple N interfacing via M code Direct connection to Haas machines Variable feedrates Linear, arc & spiral milling Fast setups High accuracy & repeatability 12-month limited warranty Made in the US F E G 0.530" wide x 0.50" deep mm wide x 12.7 mm deep Front & Rear Tie-Down Slots Dimensions (Inches Millimeters) K H D L J T-slot detail Dimensions (Inches Millimeters) H J 0.970/ /23.62 K 0.390/ /9.14 L ' 4.3 m able HRT160SP HRT210SP HRT310SP D E ± ± ± ± ± ±0.03 F G Ø x dp x x x x x x

13 n HRT with shorter overall length.... SPINDLE HRT 160SP HRT 210SP HRT 310SP Torque 150 ft-lb 203 Nm 210 ft-lb 285 Nm 300 ft-lb 407 Nm Runout Max " mm " mm " mm acklash 30 arc-sec 30 arc-sec 30 arc-sec Speeds to 130 /sec to 100 /sec to 75 /sec Tooling 6 std 60 6 std 60 6 std 60 enter Height 5.000" ± mm ± " ± mm ± " ± mm ±0.03 rake bar 100 ft-lb 136 Nm 200 ft-lb 271 Nm 500 ft-lb 678 Nm INDEXING 1 ccuracy ±15 arc-sec ±15 arc-sec ±15 arc-sec Repeatability 10 arc-sec 10 arc-sec 10 arc-sec Resolution Max Rotation/Step Worm Gear Diameter 4.7" 119 mm 6.3" 160 mm 9.4" 239 mm MOTOR Gear Ratio (worm & gear) 63:1 90:1 72:1 Timing elt 2:1 2:1 2:1 OPERTING SPEIFITIONS Duty ycle full/low speed 50% / 100% 50% / 100% 50% / 100% Operating Temp. (max ambient) 100 F F F 38 Power Required (V) Max ir Pressure 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar WEIGHT Table 90 lb 40.8 kg 165 lb 74.8 kg 435 lb kg rushless ontrol 14.2 lb 6.4 kg 14.2 lb 6.4 kg 14.2 lb 6.4 kg 1 See page 36. Due to continual development, all machine specifications are subject to change. 11

14 HRT Super High Speed For small to medium parts, Haas boosts productivity through even shorter cycles times with the HRT210SHS. Nearly six times faster than the standard HRT210, the HRT210SHS greatly increases productivity with 360 /sec feedrates. In addition to the increased speed, the HRT210SHS also features a compact design like our SP Series. Harmonic drive gear design ompact enclosure rushless servomotor technology oolant-resistant polyurethane conduit & seals Fast, easy, flexible programming Simple N interfacing via M code Direct connection to Haas machines Variable feedrates Linear, arc & spiral milling Fast setups High accuracy & repeatabililty 12-month limited warranty Made in the US HRT Super High Speed Series Part # Description HRT210SHS 210 mm (8.3") Servo Rotary Table w/ Harmonic Gear Drive & Motor in ack Specifications and Dimensions L D K 0.530" wide x 0.50" deep mm wide x 12.7 mm deep Front & Rear Tie-Down Slots Minimum Dia. olt ircle: 5.65" mm mm " wide x 0.225" deep mm wide x 5.7 mm deep Locating Key E H G F J 14' 4.3 m able Dimensions (Inches Millimeters) D ± ±0.03 E Ø (±0.0005) x 1.20 deep (±0.013) x 30.1 deep F G H J 1.57 Wrench ccess 39.9 K L HRT210SHS-HD SPINDLE Torque 200 ft-lb 271 Nm Runout Max " mm Speeds to 360 /sec Tooling 8 std 45 enter Height 6.000" ± mm ±0.03 Max Part apacity 50 lb 22.7 kg INDEXING 1 ccuracy ±30 arc-sec Repeatability 10 arc-sec Resolution Max Rotation/Step Drive Harmonic Gear MOTOR Gear Ratio 50:1 OPERTING SPEIFITIONS Duty ycle full/low speed 50% / 100% Operating Temp. (max ambient) 100 F 38 Power Required (V) WEIGHT amps Table 165 lb 74.8 kg rushless ontrol 14.2 lb 6.4 kg 1 See page 36. Due to continual development, all machine specifications are subject to change. 12

15 HRT320F and HIT210 The Haas HRT320F rotary table features a highprecision face gear (Hirth type) that provides superior indexing accuracy and positioning. The design also provides extreme rigidity for off-center milling, drilling, and tapping operations. The platter can be positioned in 1-degree increments for maximum precision and repeatability. The Haas HIT-210 is a heavy-duty face-gear indexing table that offers solid rotary indexing and part holding for heavy milling with extreme repeatability. It provides 45 indexing, with an accuracy of ±15 arc-seconds and repeatability of 5 arc-seconds. The 210 mm (8.3") platter holds medium to large parts weighing up to 300 lb, and a powerful motor turning a Geneva-star mechanism provides an indexing speed of 90 per second. HRT320F SPINDLE Torque 500 ft-lb 678 Nm Runout " mm Speeds to 80 /sec Tooling 6 std 60 rake bar 3500 ft-lb 4749 Nm Pop Out (to index) 0.075" 1.9 mm enter Height 9.000" ± mm ±0.03 INDEXING 1 ccuracy ±3 arc-sec Repeatability ±1 arc-sec Resolution 1.0 Max Rotation/Step 999 Worm Gear Diameter 9.40" mm MOTOR Gear Ratio (worm & gear) 72:1 Timing elt 2:1 OPERTING SPEIFITIONS Operating Temp. (max ambient) 100 F 38 Power Required (V) Max ir Pressure 120 psi 8.3 bar WEIGHT Table 450 lb kg rushless ontrol 14.2 lb 6.4 kg 13 HIT210 SPINDLE Torque 100 ft-lb 136 Nm rake Torque psi bar Runout Max 0.001" 0.03 mm Speeds 90 /sec PLTTER Tooling 6 std 60 Pilot ore 3.175" , mm +0.13, -0 Through-ore 0.875" mm enter Height 6.000" ± mm ±0.03 Minimum Dia. olt ircle 6.00" mm Pop Out (to index) 0.210" 5.33 mm MOTOR Type rush-type D Servo Timing elt 8:1 Geneva Star INDEXING Increment 45 ccuracy ±15 arc-sec Repeatability 5 arc-sec GENERL ase Locating Key " x 0.225" dp mm x 5.7 mm dp Operating Temp (max ambient) 100 F 38 ir Pressure Max 120 psi 8.3 bar Power Required 115 V 15 amps Weight 150 lb 68 kg Product dimensions available online at

16 HRT Dual-Platter Series Double your production with our HRT160-2 and HRT210-2 dual-platter models. The HRT160-2 provides two 160 mm platters on 10" centers, and the HRT210-2 provides two 210 mm platters on 12" centers. oth models yield maximum productivity in minimal space. May be special ordered in SP style, and with 1-6 or 1-5 platters, for an additional cost. ontact Haas or your local Haas Factory Outlet for details. Heavy-duty design oolant-resistant polyurethane conduit & seals Simple N interfacing via M code Direct connection to Haas machines Variable feedrates Linear, arc & spiral milling High accuracy & repeatability 12-month limited warranty Made in the US Specifications and Dimensions Dimensions (Inches Millimeters) HRT160-2 HRT ± ± ± ± D ± ± ± ±0.05 E F G H J K K HRT Dual Table Series ID. Part # Description. HRT160-2* Dual-Spindle Servo Rotary Table, 10" (254 mm) enter Distance. HRT210-2* Dual-Spindle Servo Rotary Table, 12" (305 mm) enter Distance D *Note: Dual-table rotaries are not designed to be used with spindles in the vertical position. E H J F G 14

17 .. HRT160-2 HRT210-2 SPINDLE Torque 110 ft-lb 149 Nm 170 ft-lb 230 Nm Runout Max " 0.013mm " mm acklash 30 arc-sec 30 arc-sec Speeds to 80 /sec to 60 /sec Tooling 6 std 60 6 std 60 enter Height 6.750" ± mm ± " ± mm ±0.03 rake Torque psi bar psi bar INDEXING 1 ccuracy ±15 arc-sec ±15 arc-sec Repeatability 10 arc-sec 10 arc-sec Resolution Max Rotation/Step Worm Gear Diameter 4.7" 119 mm 6.3" 160 mm MOTOR Gear Ratio (worm & gear) 63:1 90:1 Timing elt 2:1 2:1 OPERTING SPEIFITIONS Duty ycle full/low speed 50% / 100% 50% / 100% Operating Temp. (max ambient) 100 F F 38 Power Required (V) Max ir Pressure 120 psi 8.3 bar 120 psi 8.3 bar WEIGHT Table 210 lb 95.3 kg 355 lb kg rushless ontrol 14.2 lb 6.4 kg 14.2 lb 6.4 kg 1 See page 36. Due to continual development, all machine specifications are subject to change. 15

18 HRT Series If workholding versatility is important to you, the HRT5 and HRT6 rotary tables are the way to go. hucks, faceplates, and collet chucks can easily be mounted to their standard 1 spindle nose. For the HRT6, Haas offers an 8" 3-jaw chuck, as well as 8" and 11" faceplates for making your own fixtures. For small parts, we have 5 and 16 collet chucks that work with our 6 pneumatic draw bar assembly. For the HRT5, we offer a 6" top-reversible 3-jaw chuck. For both rotary tables, other accessories are available from your tooling supplier. Specifications and Dimensions G E D M K F Versatile workholding options Large through holes oolant-resistant polyurethane conduit & seals Pneumatic draw bar option (1-6 model) Fast, easy, flexible programming Simple N interfacing via M code Direct connection to Haas machines Variable feedrates Linear, arc & spiral milling Fast setups High accuracy & repeatability 12-month limited warranty Made in the US J L Dimensions (Inches Millimeters) H HRT5 HRT6 5 Spindle 6 Spindle D E F ± ± ± ±0.03 G H Ø J K L M Locating Key on base of all models: " wide (+0, ") x 0.225" deep mm wide (+0, mm) x 5.72 mm deep HRT Series ID. Part # Description. HRT6 Rotary Table w/1-6 Spindle Nose. HRT5 1, 2 Rotary Table w/1-5 Spindle Nose 6 Drawtube ssembly HRT ollet dapters 3J ollet dapters (vailable from your tooling supplier) ollet dapters FP8 or FP11 8" (203 mm) or 11" (279 mm) Faceplates 1 Draw tube not available. 2 ccessories for the HRT5 available from your tooling supplier. L86-8" (203 mm), 3-Jaw Manual huck 16

19 .. HRT5 HRT6 SPINDLE Torque 150 ft-lb 203 Nm 210 ft-lb 285 Nm Runout Max " mm " mm acklash 30 arc-sec 30 arc-sec Speeds to 130 /sec to 100 /sec Tooling 1-5 Spindle 1-6 Spindle enter Height 5.000" ± mm ± " ± mm ±0.03 rake Torque psi bar psi bar INDEXING 1 ccuracy ±15 arc-sec ±15 arc-sec Repeatability 10 arc-sec 10 arc-sec Resolution Max Rotation/Step Worm Gear Diameter 4.7" 119 mm 6.3" 160 mm MOTOR Gear Ratio (worm & gear) 63:1 90:1 Timing elt 2:1 2:1 OPERTING SPEIFITIONS Duty ycle full/low speed 50% / 100% 50% / 100% Operating Temp. (max ambient) 100 F F 38 Power Required (V) Max ir Pressure 120 psi 8.3 bar 120 psi 8.3 bar WEIGHT Table 90 lb 40.8 kg 165 lb 74.8 kg rushless ontrol 14.2 lb 6.4 kg 14.2 lb 6.4 kg vailable in SP models; see page See page 36. Due to continual development, all machine specifications are subject to change. 17

20 TRT Series Eliminate second and third operations and setups by using the Haas TRT210 or TRT160 two-axis tilting rotary table. Machine up to five sides of a part, and easily program the table to reach virtually any compound angle. When used on a Haas VM with the 5-axis option, complex geometries such as impellers are easily accomplished. The TRT160 and 210 are sturdy, high-precision tilting units that easily interface with a Haas VM. dd the Haas servo control and they ll run on any other VM. The maximum capacity (part and fixture) for the TRT210 is 300 lb, and the maximum capacity for the TRT160 is 150 lb. With a 200 lb load on the TRT210, there is less than " of deflection. y using massive castings, and mounting large-diameter bearings at both ends of the spindle, Haas is able to build an extremely rugged and durable tilting table. 2-axis servo control is available for semi-4th and 5th-axis operation. lso available are an 1-5 platter for the TRT160, and an 1-6 platter for the TRT210. Specifications and Dimensions D E, pprox. Travel Limit G H Front View Min. learance, F J (Maximum Part / Fixture Radius) 14' 4.3 m able Dimensions (Inches Millimeters) Versatile workholding options Machine up to five sides Eliminate multiple setups Increase productivity Fast, easy, flexible programming Simple N interfacing via M code Direct connection to Haas machines Fast setups High accuracy & repeatability 12-month limited warranty Side View Top View L K TRT160 TRT ±120º ±120º D E F G H J K L Ø , , mm , mm , -0 Made in the US 17' 5.2 m able 18

21 . TRT Series ID. Part # Description. TRT160 Tilting 5th-xis Rotary Table 160 mm (6.3").. TRT210 Tilting 5th-xis Rotary Table 210 mm (8.3") TRT160 TRT210 Rotary axis Tilt axis Rotary axis Tilt axis SPINDLE Torque 150 ft-lb 203 Nm 210 ft-lb 285 Nm 210 ft-lb 285 Nm 300 ft-lb 407 Nm Runout Max " mm " mm " mm " mm acklash 30 arc-sec 30 arc-sec 30 arc-sec 30 arc-sec Speeds to 80 /sec to 60 /sec to 60 /sec to 50 /sec enter Height N/ 7.750" ± mm ±0.03 N/ 9.000" ± mm ±0.03 rake bar 100 ft-lb 136 Nm 200 ft-lb 271 Nm 200 ft-lb 271 Nm 500 ft-lb 678 Nm INDEXING 1 ccuracy ±15 arc-sec ±25 arc-sec ±15 arc-sec ±25 arc-sec Repeatability 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec Resolution Max Rotation/Step ± ±120 MOTOR Gear Ratio 63:1 90:1 90:1 72:1 Timing elt 2:1 2:1 2:1 2:1 OPERTING SPEIFITIONS Operating Temp. (max. ambient) 100 F F 38 Power Required (V) 1-axis control Power Required (V) 2-axis control Max ir Pressure 120 psi 8.3 bar 120 psi 8.3 bar WEIGHT Table 400 lb kg 735 lb kg rushless ontrol 23.1 lb (2-axis) 14.2 lb (1-axis) 23.1 lb (2-axis) 14.2 lb (1-axis) 10.5 kg (2-axis) 6.4 kg (1-axis) 10.5 kg (2-axis) 6.4 kg (1-axis) 1 See page 36. Due to continual development, all machine specifications are subject to change. 19

22 TR Series Trunnion. If you need a 5-axis solution for your 3-axis mill, look to the Haas trunnion rotary tables for a simple bolt-on solution for machining complex parts. These dual-axis trunnion tables bolt directly to the mill s table to provide 5-axis simultaneous motion, or position parts to nearly any angle for multi-sided machining.. The compact TR160Y is designed to mount in the Y direction of mid-size VMs Specifications and Dimensions J M K L D N Dimensions (Inches Millimeters) TR160 TR160Y TR210 TR310 E F H G D Ø E F G H I J Ø K L M N I Max part swing reduced at tilt angles greater than ±

23 Scale feedback on axis ±120 tilt, 360 rotation Simple bolt-on mounting Machine multiple sides in one setup High accuracy & repeatability rushless servomotors 12-month limited warranty Made in the US TR Trunnion Series ID. Part # Description. TR160 Dual-xis Trunnion Table w/160 mm Platter TR160-2 Dual-Platter Trunnion w/160 mm Platters (not shown). TR160Y ompact Dual-xis Trunnion Table w/160 mm Platter. TR210 Dual-xis Trunnion Table w/210 mm Platter D. TR310 Dual-xis Trunnion Table w/310 mm Platter. D. Now with higher -axis accuracy when used on a New Generation Haas machining center.* TR160 TR160Y TR210 TR310 Rotary axis Tilt axis Rotary axis Tilt axis Rotary axis Tilt axis Rotary axis Tilt axis SPINDLE Torque 100 ft-lb 136 Nm 150 ft-lb 203 Nm 150 ft-lb 203 Nm 150 ft-lb 203 Nm 210 ft-lb 285 Nm 300 ft-lb 407 Nm 300 ft-lb 407 Nm 300 ft-lb 407 Nm Runout Max " mm N/ " mm N/ " mm N/ 0.001" mm N/ Platter Pilot ID 1.500" x 4.63" dp N/ 1.500" (thru) N/ 2.000" x 4.9" dp N/ 3.250" mm (thru) N/ acklash 30 arc-sec 30 arc-sec 30 arc-sec 30 arc-sec 30 arc-sec 30 arc-sec 30 arc-sec 30 arc-sec Speeds to 80 /sec to 80 /sec to 130 /sec to 100 /sec to 60 /sec to 60 /sec to 50 /sec to 50 /sec rake bar 100 ft-lb 136 Nm 200 ft-lb 271 Nm 100 ft-lb 136 Nm 300 ft-lb 407 Nm 200 ft-lb 271 Nm 400 ft-lb 542 Nm 500 ft-lb 678 Nm 1,000 ft-lb Nm INDEXING 1 ccuracy ±15 arc-sec ±15 arc-sec* ±15 arc-sec ±15 arc-sec* ±15 arc-sec ±15 arc-sec* ±15 arc-sec ±15 arc-sec* Repeatability 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec 10 arc-sec Resolution Max Rotation/Step ± ± ± ±120 MOTOR Gear Ratio 63:1 63:1 63:1 63:1 90:1 90:1 72:1 72:1 Timing elt 2:1 2:1 2:1 2:1 2:1 2:1 3:1 3:1 PLTTER Part Swing (max) " 445 mm 7.5" 191 mm 23.5" 597 mm 31" 787 mm apacity 80 lb 36 kg 80 lb 36 kg 200 lb 91 kg 500 lb 227 kg Platter Diameter 6.3" 160 mm 6.3" 160 mm 8.3" 210 mm 12.2" 310 mm OPERTING SPEIFITIONS Duty ycle full/low speed 50% / 100% 50% / 100% 50% / 100% 50% / 100% Operating Temp. (max ambient) 100 F F F F 38 Power Required (V) 1-axis control Power Required (V) 2-axis control Max ir Pressure 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar WEIGHT Table 425 lb 193 kg 350 lb 159 kg 815 lb 370 kg 1720 lb 780 kg rushless ontrol 23.1 lb (2-axis) 14.2 lb (1-axis) 23.1 lb (2-axis) 14.2 lb (1-axis) 23.1 lb (2-axis) 14.2 lb (1-axis) 23.1 lb (2-axis) 14.2 lb (1-axis) 10.5 kg (2-axis) 6.4 kg (1-axis) 10.5 kg (2-axis) 6.4 kg (1-axis) 10.5 kg (2-axis) 6.4 kg (1-axis) 10.5 kg (2-axis) 6.4 kg (1-axis) *Scale feedback provides ±15 arc-sec accuracy when used on a Haas mill with optional 4th- and 5th-axis drives, and using software version 18.xx or higher. ccuracy is ±35 arc-sec on older Haas machines, or when using the servo control box for stand-alone operation. 1 See page Max part swing reduced at tilt angles greater than ± 75. Due to continual development, all machine specifications are subject to change. 21

24 T5 Series Use the T5 Series tilting collet indexers to eliminate second and third operations by automatically positioning parts to nearly any angle for machining. Or, use them for simultaneous 5-axis motion for machining complex geometries. ll four versions single-, dual-, triple- and quad-head increase productivity by eliminating multiple setups and reducing the number of tool changes. With the multi-head units, multiple parts can be machined by each tool before making a tool change. The T5s provide 240 of tilt and a full 360 of rotation to reach all five sides of a part. The tilt is provided by an HRT 210, and the rotation is provided by either one, two, three, or four H5 heads.. Specifications and Dimensions T5 Single Spindle T5 Two, Three & Four Spindle 14' 4.3 m able D E Dimensions (Inches Millimeters) E F G D Dimensions (Inches Millimeters) D E +90º/-120º F = Minimum learance F H T5-2 T5-3 T TYP TYP TYP TYP TYP TYP D E F G ±120º ±120º ±120º H J 4.47 ± ± ± ± ± ±0.5 = Minimum learance 22

25 T5 Series. ID. Part # Description. T5 Tilting 5-xis Rotary Table, HRT210 tilting w/h5 rotation.. T5-2 Tilting 5-xis Rotary Table, HRT210 tilting w/h5-2 rotation. T5-3 Tilting 5-xis Rotary Table, HRT210 tilting, w/h5-3 rotation D. T5-4 Tilting 5-xis Rotary Table, HRT210 tilting, w/h5-4 rotation D. ollet closers not supplied. Use -25 or See pages T5: One, Two, Three & Four Spindle onfiguration Tilt xis T5-3* Rotary xis T5* T5-2* T5-4* SPINDLE Torque 210 ft-lb 285 Nm Runout Max " mm acklash 30 arc-sec Speeds to 60 /sec Tooling 6 std 60 enter Height 6.000" ± ±0.03 mm rake 100 psi bar 271 Nm INDEXING 1 ccuracy ±15 arc-sec Repeatability 10 arc-sec Resolution Max Rotation/Step Worm Gear Diameter 6.3" 160 mm MOTOR Gear Ratio (worm & gear) 90:1 Timing elt 2:1 OPERTING SPEIFITIONS Duty ycle full/low speed 50% / 100% Operating Temp. (max ambient) 100 F 38 Power Required (V) 1-axis control Power Required (V) 2-axis control Max ir Pressure 120 psi 8.3 bar WEIGHT rushless ontrol 23.1 lb (2-axis) 14.2 lb (1-axis) 10.5 kg (2-axis) 6.4 kg (1-axis) SPINDLE Torque 60 ft-lb 81 Nm 25 ft-lb 34 Nm 25 ft-lb 34 Nm Runout Max " mm " mm " mm acklash 40 arc-sec 50 arc-sec 50 arc-sec Speeds to 410 /sec to 200 /sec to 200 /sec ollets std 5 ( 1 /64" -1 1 /16") std 5 ( 1 /64" -1 1 /16") std 5 ( 1 /64" -1 1 /16") Nose Thread 2 3 /16" /16" /16" - 10 enter Height 4.000" ± " ± " ± mm ± mm ± mm ±0.05 INDEXING 1 ccuracy ±30 arc-sec ±60 arc-sec ±60 arc-sec Repeatability 10 arc-sec 10 arc-sec 10 arc-sec Resolution Max Rotation/Step Worm Gear Diameter 2.8" 71 mm 2.8" 71 mm 2.8" 71 mm MOTOR Gear Ratio (worm & gear) 60:1 60:1 60:1 OPERTING SPEIFITIONS Duty ycle full/low speed full speed full speed full speed Operating Temp. (max. ambient) 100 F F F 38 Power Required (V) 1-axis control Power Required (V) 2-axis control Max. ir Pressure 120 psi 8.3 bar 120 psi 8.3 bar 120 psi 8.3 bar WEIGHT Table 255 lb 116 kg 370 lb 168 kg 420 lb (3HD) 520 lb (4HD) 191 kg (3HD) 236 kg (4HD) * Not for use with tailstocks. 1 See page 36. Due to continual development, all machine specifications are subject to change. 23

26 H2TS The H2TS is a self-contained setup of an H5-2 and two pneumatic tailstocks mounted on a subplate. Utilizing this high-productivity design guarantees accurate alignment while maintaining high output. The H2TS allows fast setups, and increases productivity by reducing the number of tool changes and handling time. The tailstocks adjust to the length of your parts by sliding on precision T-slots. The minimum distance from H5 to tailstock when the spindle is extended is 2.30", while the maximum distance is 12" with the spindle retracted. The distance between centers is 5". Tailstocks Part # Description H2TS Dual Spindle Mounted on Plate w/tailstocks Specifications and Dimensions ollet closers not included. Use -25 or See pages See page 26 for specifications. H2TS - Top View D E F Dimensions (Inches Millimeters) ± ±0.013 D 2.30 min 58.4 min E F H2TS - Side View H G J K Dimensions (Inches Millimeters) G max max H 2.50 min 63.5 min J K

27 Tailstocks Tailstocks are available for all Haas rotary products. ll mounting surfaces are accurately ground, and the spindles are individually fitted to their bores for minimum deflection. ottom alignment pins are provided for fast setup without indicating. Tailstocks are available in manual or pneumatic types, with center heights to match corresponding Haas rotary products. ll tailstocks are Morse taper #3. Live centers are recommended, but not included. Pneumatic Tailstocks Part # Description Manual Tailstocks Part # Description HPTS14.5 HPTS11.5 HPTS9 Pneumatic Tailstock, 14.5" (368 mm) center height for HRT600 Pneumatic Tailstock, 11.5" (292 mm) center height for HRT450 Pneumatic Tailstock, 9" (229 mm) center height for HRT310 HTS14.5 HTS11.5 HTS9 HTS6 Tailstock, 14.5" (368 mm) center height for HRT600 Tailstock, 11.5" (292 mm) center height for HRT450 Tailstock, 9" (229 mm) center height for HRT310 Tailstock, 6" (152 mm) center height for HRT210 HPTS6 HPTS5 Pneumatic Tailstock, 6" (152 mm) center height for HRT210 Pneumatic Tailstock, 5" (127 mm) center height for HRT160 HTS5 HTS4 Tailstock, 5" (127 mm) center height for HRT160 Tailstock, 4" (102 mm) center height for H5 HPTS4 Pneumatic Tailstock, 4" (102 mm) center height for H5 25

28 Tailstocks Specifications and Dimensions Pneumatic Tailstocks #3 Morse Taper F G #3 Morse Taper H G H F D E K M J L N Dimensions (Inches Millimeters) HPTS4 HPTS ± ± ± ± D E F G 2.50 Travel 63.5 Travel 2.50 Travel 63.5 Travel H J 6.28 ± ± ± ±0.3 K L ± ± ± ±0.008 M N HPTS6 HPTS ± ± ± ± D E F G 2.50 Travel 63.5 Travel 2.50 Travel 63.5 Travel H J 6.28 ± ± ± ±0.3 K L ± ± ± ±0.008 M N E D M Dimensions (Inches Millimeters) HPTS11.5 HPTS ± ± ± ± D E F G 2.50 Travel 63.5 Travel 2.50 Travel 63.5 Travel H J K L ± ± ± ±0.008 M Ø ± ± ± ±0.03 N K J L N H2TS Two-Spindle with Tailstocks SPINDLE Torque 25 ft-lb 34 Nm Runout Max " mm Speeds to 200 /sec ollets std 5 ( 1 /64" -1 1 /16") std 5 (0.4 to 27 mm) Nose Thread 2 3 /16" - 10 Spindle enter 5.875" ± mm ±0.05 INDEXiNG 1 ccuracy ±60 arc-sec Repeatability 10 arc-sec acklash 50 arc-sec Worm Gear Diameter 2.8" 71 mm Resolution 0.001º Max Step Size º MOTOR Gear Ratio (worm & gear) 60:1 OPERTING SPEIFITIONS Duty ycle full speed Operating Temp. (max ambient) 100 F 38 Power Required (V) 115 V 10 WEIGHT Rotary ssembly 280 lb 127 kg rushless ontrol 14.2 lb 6.4 kg 1 See page 36. Due to continual development, all machine specifications are subject to change. 26

29 Haas tailstock used to support a long workpiece with complex cutting requirements. Haas tailstocks are available for every size rotary table in our line, and are available in manual or pneumatic types. Specifications and Dimensions Manual Tailstocks F G F G D E H J L M K P Locating Pins N Dimensions (Inches Millimeters) HTS4 HTS ± ± ± ± #3 Morse Taper #3 Morse Taper D E F 2.50 Travel 63.5 Travel 2.50 Travel 63.5 Travel G H J K L 6.28 ± ± ± ±0.3 M ± ± ± ±0.008 N P Ø ± ± ± ±0.03 HTS6 HTS ± ± ± ± #3 Morse Taper #3 Morse Taper D E F 2.50 Travel 63.5 Travel 2.50 Travel 63.5 Travel G H J K L 6.28 ± ± ± ±0.3 M ± ± ± ±0.008 N P Ø ± ± ± ±0.03 D E H Locating Pins Dimensions (Inches Millimeters) HTS11.5 HTS ± ± ± ± #3 Morse Taper #3 Morse Taper D E F 2.50 Travel 63.5 Travel 2.50 Travel 63.5 Travel G H Ø ± ± ± ±0.03 J K ± ± ± ±0.008 L M N M J K L N 27

30 Quikhange Tooling System Quikube System For increased productivity, add the Haas Quikube System to the Haas HRT210 or HRT6 rotary table. The fixture cubes are loaded and released via pneumatic actuator, allowing the user to change from cube to cube in less than five seconds. Productivity is increased by mounting multiple parts to the fixtures, so more parts and more sides are machined per setup. The result is reduced cycle times, which means increased profits. In addition, the operator can load parts on one Quikube fixture while another is being machined. Note: Repeatability is ". Shown with Optional ube Specifications and Dimensions Front View Dimensions of ube: 4.55" sq x 4.55" long mm sq x mm long Quikube V-Lock Plate ir ctuator Side View ack View Haas Rotary Table Model HRT 210 Dimensions (Inches Millimeters) Tooling Systems Part # HQS Description Quikhange System for HRT210 (cubes or plates not included) Quikhange Plate V Lock Plate ir ctuator HQS6 TS TS 210 TS 310 UE PLTE KIT PLTE Quikhange System for HRT6 (cubes or plates not included) Tooling lock System for HRT160 Tooling lock System for HRT210 Tooling lock System for HRT310 ube only Quikhange plate and support Quikhange plate only Front View ack View Haas Rotary Table Model HRT 210 Side View D E F Quikhange Plate Dimensions (Inches Millimeters) 2.00 min clearance 50.8 min clearance D E F

31 QuikPlate System The QuikPlate Tooling System is simple to use. Moving the lever on the back of the unit is all it takes to quickly lock or unlock the plate. Use several plates to boost productivity load parts on one plate while the other is in-process. hanging the plate is fast and easy. Shown with Optional Plate Tooling lock System nother great productivity tool is the Haas Tooling lock System, for mounting on any Haas HRT160, HRT210 or HRT310 rotary table. X The Tooling lock System is made from 6061-T6 aluminum alloy and can be easily machined to meet your requirements. The system includes the aluminum tooling block, an outboard -frame support, and a steel mounting plate. They are designed for bolt-together alignment when used on a precision 5/8" T-slot. Since the tombstone can be loaded with 8, 12, 16 or more parts, all can be machined with the same tool before going on to the next tool. Y Dimensions Inches (Millimeters) Part# Rotary Table X (Length) Y (SQ) Z (enter Dist.) TS160 HRT TS210 HRT TS HRT TS310 HRT Z 29

32 ir ollet losers Haas offers three types of collet closers for use on H5 indexing heads. Each of the designs offers unique benefits you should consider before making a selection and -25 use shop air to drive a piston through a mechanical multiplier to. close the collet. This provides greater holding force and reduces operator fatigue, compared to standard manual-handle closers. simple flick of a lever causes the collet to open or close without effort. On multi-spindle heads, one of these air-actuated closers is required if you plan to use collets, because space constraints prevent the use of manual closers The -125 is our most popular design and provides up to 12,000 lb of draw-tube force with 0.060" of travel allowing part diameter variation of 0.015" without readjusting the collet. Its design is similar to the -25 but uses two pistons, which more than double the available draw force. large internal spring is used for part release. The -125 can be tightened from the rear and provides a 5 16" through-hole. Its compact size allows it to be used with all models of H5, and with the use of a small spacer, it can be operated vertically. lamping force is varied by regulating air pressure supplied to the unit (normal operating range is 45 to 60 psi). The -125 air collet closer can be used with all types of 5 collets, including step collets. losers will not remain clamped if air pressure is lost. H5 with -100 Installed djustable Drawbar Operating Pressure psi bar ollet Draw Force 0-10,000 lb kg lamping bility djustable ft-lb Nm lamping Mechanism Spring ctuated (1"Ø steel ar) (25.4 mm Ø) Draw ar ID 11 / 16 "Ø Thru Hole (27 mm Ø) Release Mechanism ir ctuated Dimensions (Inches Millimeters) Ø D E D E F 1.06 Thru 27 Thru G Ø F G H5 with -125 Installed. Dimensions (Inches Millimeters) D Ø E (thru) 7.92 E D -100 The -100 uses spring force for part clamping, and air pressure for release. It will retain full part clamping even if air pressure is removed. The -100 provides a 1 1 /16" diameter through-hole, and collets are easily tightened from the rear. It provides up to 10,000 lb of draw-tube force, with 0.025" travel, and can be used for drilling and milling in most applications. The 0.025" travel allows for a part diameter variation of 0.006" without the need to readjust the collet. Due to its long rearward length, the -100 cannot be used vertically, and is not recommended for tilting H5s. lso, some consideration must be given to clearances when using the -100 parallel to the Y axis, as its length may collide with the Z-axis waycover. losers will remain clamped if air pressure is lost. 30

33 ir ollet losers ID. Part # Description High Torque, 5 /16" Thru-Hole ir ollet loser for H High Torque, 1 1 /16" Thru-Hole ir ollet loser for H ompact, Non Thru-Hole ir ollet loser for H5 D. 6- High-Torque, 1 3 /4" Thru-Hole ir ollet loser for HRT 6-25 The -25 is our smallest and most economical closer. It fits entirely inside the H5 body, and can be used both vertically and horizontally. Since it utilizes air pressure to close, part clamping pressure can be varied easily by regulating the applied air pressure. The -25 provides medium holding power of up to 3000 lb draw force, with 0.030" of travel. It is recommended for drilling and light milling of collet-size parts. The 0.030" travel allows for a part diameter variation of 0.007" without the need to readjust the collet. The -25 should not be used with step collets. The -25 does not have a through-hole, and collets must be tightened using a 9 64" llen wrench through the collet. ollet. stops may be used, but must be drilled completely through to accommodate the llen wrench. losers will not remain clamped if air pressure is lost. ir collet closers reduce operator fatigue and provide greater holding force on H5 indexing heads all with the simple flip of a lever. Three different designs are available to meet your machining needs. 6- The 6- pneumatic draw- tube assembly works with 65 and 616 collet adapter chucks to provide 5 and 16 air collet closing capabilities for the HRT6. With the 6-, collets can be clamped with the flip of a switch. The 6- is also compatible with 3J collet adapters that may be purchased through your local tooling supplier. The 6- provides up to 5000 pounds of draw-tube force with 0.125" of travel. lamping force is spring actuated and adjustable to 100 ft-lb. The 6- tightens from the rear, and has a 1.75" through-hole. losers will remain clamped if air pressure is lost. D. H5 ir ollets Draw Force Vs. ir Pressure HRT 6 with 6- Installed 12, psi 10, psi Draw Force, lb Operating Pressure psi bar lamping bility djustable ft-lb Nm (1"Ø Steel ar) (25.4 mm Ø) ollet Draw Force djustable 0-5,000 lb kg ollet Draw djustable " mm lamping Mechanism Spring ctuated Dimensions (Inches Millimeters) UN-2 Ø 1.75 Thru 44.5 Thru D E , psi D E ir Pressure, psi 31

34 ccessories Interface ables Haas offers a variety of cables to make interfacing Haas rotary tables to your machines quick and easy. We build and test each interface cable assembly in our state-of-the-art production facility. They feature manual and M-function interfaces, and will connect any Haas rotary product to most N and manual machines.. More information available online at hucks. Eight-inch, 3-jaw chucks, models L86- & L8-, for the HRT6 and HRT210 respectively, can be mounted in minutes with superb accuracy and concentricity. For the H5, the L5-5" 3-jaw chuck simply threads onto the spindle nose. ll required hardware is supplied by Haas. E. ccessories. D. 8" & 11" Faceplates The HRT6 model can use the optional 8" or 11" faceplates (models FP8 and FP11, shown here) to accommodate your own special fixtures and parts. The recess on the backside of the faceplate simply slips over the 1-6 platter and is bolted down. ll required hardware is supplied by Haas 5 & 16 ollet dapters F. G. 5 (65) or 16 (616) collet adapter can be mounted on the HRT6, and collets can be closed with the optional factory-installed pneumatic draw tube assembly (6). The adapter from draw tube to collet is included with the 65. Keep in mind, the 5 spindle adapter has a 2 3 /16" 10 threaded nose, which can also be used for oversized collets, collet chucks and small fixtures. It can also use 3J and 16 collet adapters, which are available from your tooling supplier. ll required hardware is supplied by Haas. H. ID. Part # Description. N Extra N Interface able. RQS Remote Quill Switch. I Interface ox & able ID. Part # Description L " 3-Jaw huck for HRT310 L6-1 6" Top Reversible, 3-Jaw huck for HRT160 D. L5-5" Solid-Jaw, Reversible, 3-Jaw huck for H5 L65-1 6" 1-5 Top Reversible, 3-Jaw huck for HRT5 HRT 210 Optional huck Mounting E. L8-8" Top Reversible, 3-Jaw huck for HRT210 L86-1 8" 1-6 Top Reversible, 3-Jaw huck for HRT6 F. FP11 11" 1-6 Faceplate for HRT6 G. FP8 8" 1-6 Faceplate for HRT6 H ollet huck dapter for HRT6 L8-8" (203 mm), 3-jaw chuck 1 Not Shown 32

35 pplications This H5 is being used for a simple, point-to-point positioning application. Used in this way, there are 360,000 different positions programmable to within program can contain up to 99 different steps, and each of these steps can be repeated up to 999 times. n H5 being used in a 4th-axis milling application. With simple programming and easy interfacing to any N machine, the H5 functions competently as a semi-4th axis activated by one M function. oth arc and spiral milling operations are easily achievable. These attributes make the H5 the perfect alternative to cumbersome and expensive offshore fourth-axis machines. standard interface cable is included. Loading a part is easy with the H5 manual collet closer. Install the collet by aligning the keyway on the collet with the key inside the H5 spindle. Turn the collet draw tube until proper collet tightness is obtained, insert your part and pull back on the handle to clamp. ll T-slot rotary tables can be easily fitted with 3-jaw chucks. Flat-back chucks are usually installed and aligned by clamping a bar a few thousandths of an inch smaller than the diameter of the through-hole and leaving an inch or two hanging out the back of the chuck. Insert the bar into the through-hole of the rotary table, rotate the chuck until the bolt holes align with the T-slots, then insert the T-nuts and bolts. ll Haas rotary products can be used as a true 4th axis when integrated on a Haas machining center, or as a semi-4th axis on any other N machine. Simultaneous rotational milling, as well as spiral milling, can be easily performed. H5 utilizing the 2 3 /16"-10 threaded spindle nose to mount a 5" 3-jaw chuck. y entering a G98 code, a circle can be evenly divided into anywhere from 2 to 999 divisions. lso, oddnumbered bolt circles and uneven hole spacing are easily handled through simple programming. 33

36 ccessories hart H5 H5, 2, 3, 4 HRT, TR110 ollet losers -25 ompact, Non Through-Hole -100 High Torque, with 1" Through-Hole -125 High Torque, with 5/16" Through-Hole 6 Pneumatic Draw Tube, 1.75" I.D. Through-Hole MN Manual ollet loser ssembly 1.195"ø HMDT Haas Manual Draw Tube hucks L5-5" (130 mm)djust True, Solid Reversible, 3-Jaw L8-8" (210) djust True, Top, Reversible, 3-Jaw L86-8" (210 mm) djust True, 1-6 Top Reversible, 3-Jaw L8-SHS 8" (210 mm) 3-Jaw huck L10-10" (250 mm) djust True, Top Reversible, 3-Jaw L6-6" (160 mm) djust True, Top Reversible, 3-Jaw L65-6" (160 mm) djust True, 1-5 Top Reversible, 3-Jaw M4 4" (102 mm) Manual 3-Jaw huck Haas Tailstocks #3 Morse Taper 1 HTS4 Manual Tailstock, 4" enter Height HTS5 Manual Tailstock, 5" enter Height HTS6 Manual Tailstock, 6" enter Height HTS9 Manual Tailstock, 9" enter Height HTS11.5 Manual Tailstock, 11.5" enter Height HTS14.5 Manual Tailstock, 14.5" enter Height HPTS4 Pneumatic Tailstock, 4" enter Height HPTS5 Pneumatic Tailstock, 5" enter Height HPTS6 Pneumatic Tailstock, 6" enter Height HPTS9 Pneumatic Tailstock, 9" enter Height HPTS11.5 Pneumatic Tailstock, 11.5" enter Height HPTS14.5 Pneumatic Tailstock, 14.5" enter Height HRT 6 ccessories FP8 8" (203 mm) 6 Faceplate FP11 11" (279 mm) 6 Faceplate 65 5 ollet huck ollet huck HQS6 Quikhange System (cube or plates not included) HQ6KIT dapter Kit (required to adapt HQS to HRT 6) Fixturing ccessories HQS Quikhange System (cube or plates not included) UE Quikhange ube (4.55" cubed) PLTEKIT Quikhange Plate and Support - Use with HQS PLTE Quikhange Plate Only (8"W x 10" x 1") TS-160 omplete Tooling lock System (12" length x 4" square) TS-210 omplete Tooling lock System (12" length x 4.5" square) TS omplete Tooling lock (20" length x 4" square) TS-310 omplete Tooling lock System (19" length x 6" square) DP5 dapter Plate Only, HRT160 DP6 dapter Plate Only, HRT210 DP9 dapter Plate Only, HRT310 LK5-12 luminum Tombstone Only, 4" x 4" x 12" LK6-12 luminum Tombstone Only, 4.5" x 4.5" x 12" LK6-20 luminum Tombstone Only, 4.5" x 4.5" x 20" LK9-19 luminum Tombstone Only, 6" x 6" x 19" SUP5 -Frame Support Only, HRT160 (5" enter) SUP6 -Frame Support Only, HRT210 (6" enter) SUP9 -Frame Support Only, HRT 310 (9" enter) SUP5XP -Frame Support, Plain earing, for HRT210M (6" enter), includes 1" spacer SUP5XR -Frame Support, Needle earing, for HRT210M (6" enter), includes 1" spacer Frame Support for HRT210 w/half Plain earing (6" enter) Riser lock for HRT210M Interfaces N Extra N Interface able, 15 ft. RQS Remote Quill Switch N 30 Extra N Interface able, 30 ft. N-VF1 N Interface able for Haas Machines 1 Use live center only (not provided). 2 Not available for HRT 210SP. 3 T5 only. 4 HRT 210M only. 5 HRT 5 only. 6HRT 6 only. 7Not compatible with brushless models. ll prices subject to change wit 34

37 HRT 160 HRT 210 HRT 5/6 HRT 310 HRT 450 HRT 600 T5, 2, 3, 4 TRT HRT 210SHS hout prior notice. 15% restocking charge on all returns/exchanges. 35

38 Haas utomation, Inc Sturgis Road, Oxnard, alifornia General Definitions, Terms & onditions ccuracy The accuracy of Haas rotary products is measured in an unloaded condition, without any attachments. It is important to note that your indexing accuracy results can be affected by a number of things, including the fixtures used, the size and weight of the part, off-center parts, outboard supports, tailstock pressures, off-axis drilling and milling, inadequate or uneven fixture mounting surfaces, out of alignment (TIR) tailstocks or supports, etc. Haas utomation is dedicated to helping you get the most from your new rotary table. If you need assistance choosing the best Haas rotary solution for your needs, or with setting up your application, please contact Haas or your local Haas Factory Outlet. We re here to help. ustomer Modifications The customer assumes all responsibility for modifications. Your warranty is void if you disassemble the motor covers or remove any portion of the worm, spindle, or related parts. We do not recommend that customers adjust backlash, as this is extremely critical to the life of the unit. You local HFO can do this for you. ustomers who install chucks and air collets assume all responsibility for any damage done. Your HFO can help you with these devices also. Torque Ratings Quoted torque is peak torque for short durations only. Units that have high duty cycles (>50%) cannot sustain peak torque. Excessive torque demands may be the result of an undersized table, excessive tailstock pressure, or misaligned end supports. You may contact Haas or your local HFO for assistance with your application. ritical lignments lignments of outboard supports to the indexing device are critical. If the tailstock support is not centered to the table axis, you are, in effect, bending the part. This requires substantial energy and causes indexing inaccuracy, as well as substantially reduces the life of the indexing device. If you need assistance setting up your application, please give us a call. Responsibility The user is solely responsible for properly sizing the rotary table to the work required. However, Haas utomation and your local Haas Factory Outlet are available to help you make the right choice. Here are two good rules of thumb: The working size of the part should not exceed the diameter of the worm gear. Working outside this dimension requires significantly lower feeds and loads. nd, the part and fixture should not exceed one-half the weight of the indexing device without tailstock. Warranty 12-month Limited Warranty ll warranty work is provided at Haas utomation, Inc., in Oxnard, alifornia. The user is responsible for first obtaining an RM number, and then returning the unit to Haas. We will return the unit, freight pre-paid, via ground service. llow 10 working days for repairs. Faster turnaround is available at additional cost. Specifications subject to change without notice. 36

39 Haas utomation Online The Haas Website Wouldn t it be great to have a salesman available 24 hours a day? To have your most detailed questions answered instantly? To get an accurate price quote that includes the latest promotions? t HaasN.com you can have all this and more. Our website provides all the information that is important to YOU. What you need, when you want it all online. Find Your Rotary Distributor To find your local Haas rotary and N machine tool distributor, call , or go to click on the Dealer Network category and follow the instructions. You will find the Haas worldwide, factory-authorized N distributor network, and a US-specific zip code quick-find search option. ontacting Haas utomation Haas utomation, Inc Sturgis Road, Oxnard, alifornia