Part Number RER.5E-X RER.75E-X RER1.25E-X RER2.0E-X. Height C

Transcription

1 ELETRIL SOLUTIONS Harness oard ccessories Panduit harness board accessories provide fast routing and forming of wires in harness fabrication. They hold the wires off the harness board at a uniform height for easy application of cable ties. The accessories are designed for use with various Panduit cable tie installation tools. To maintain the harness at a uniform height of approx inches (33.8mm) (at the center of the harness) above the board, use RER Elastic Retainers, R.75-E6 or R.5-E6, PH.75-S8, TJF and SHH1-S8 or SHH3-S8 harness board accessories. This height is suitable for use with PT1M utomatic Tie Installation Tool.. 1. Ties 2. ccessories Elastic Retainers bundles are formed as individual wires are inserted ompleted bundles can be easily removed The elastic band is replaceable brasion Replacement Elastic Part Number RER.5E-X RER.75E-X RER1.25E-X RER2.0E-X For economy, the elastic band can be replaced in the RER Elastic Retainers without removing the RER base. 4. Max. undle In. mm In. mm In. mm In. mm olor RER.5-S6-X RER.75-S6-X lack ase, White rm Two #6 (M3) 50 RER1.25-S6-X Screws 50 RER2.0-S6-X Natural 50 Elastic Retainers ER Type bundles are formed as cable bundles are inserted ompleted bundles can be easily removed Max. undle In. mm In. mm In. mm In. mm olor ER.5-E4-X Two #6 (M3) 0 lack ER1.25-E4-X Screws 0 For technical assistance in the U.S., call (outside the U.S., see inside back cover for directory) ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

2 . 1. Ties undle Retainers Funnel entry allows fast cable insertion ompleted bundles can be easily removed ELETRIL SOLUTIONS olor: lack 2. ccessories (11.2).78 (19.8) 2.18 (55.4) 2.56 (65.0) R.5 and R.75 R2 R2-1.3 Max. undle Standoff In. mm In. mm 2.25 (57.2) 2.50 (63.5) R.5-E Impact R.75-E Resistant Two #6 (M3) Screws R2-1.3-X Two 1/4" (M6) Screws 3. brasion 4. orner Posts Designed to pre-form tight bundles at harness corners and breakouts Top arm rotates upward for easy removal of completed harness R X Glass Rubber dhesive Tape R2-1.5-X Filled R2-4-X Two 1/4" (M6) Screws R2-6-X (47.8) 1.18 (30.0) PH 1.35 (34.4).90 (22.9).172 (4.4) Dia. Hole 1.60 (40.8) 1.08 (27.4) 1.11 (28.2) PL (22.4) (14.2).172 (4.4) Dia. Hole 1.52 (38.6) T-Junction Fixture PH.75-S8-X PL.75-S8-X Forms cable junctions Fixture moves down for easy harness removal Max. undle In. Max. undle In. mm mm TJF-X and Nickel Plated Steel D Nylon 6.6 olor E (Dia) olor lack Two #8 (M4) Screws 0 lack Nail Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in OLD. ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

3 ELETRIL SOLUTIONS Wire End Holder Secures wire ends while harness is being fabricated Used with #28 thru #16 WG wires. 1. Ties.16 (4.1).29 (7.4) (13.5) (20.0) 1.22 (31.0) 2. ccessories olor.18 (4.6).37 (9.4) WEH-E8- cetal lack Two #8 (M4) Screws Harness oard Nails Speed routing of wires Uniform driving depth is insured by a collar stop Smooth finish on nails prevents abrasion to wire jackets 3. brasion 4. Part Number Overall Thickness In. mm In. mm In. mm HN.75-T HN1-T HN1.5-T HN2-T Hammered Nickel into harness Plated Steel board HN2.5-T HN3-T HN4-T For technical assistance in the U.S., call (outside the U.S., see inside back cover for directory) ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

4 . 1. Ties Fanning Strip Holds wires in a specific orientation No sharp edges to damage wire insulation ELETRIL SOLUTIONS Will accept wires up to 18 WG Fanning strip can remain as part of completed harness 2. ccessories (3.0).16 (4.0).06 (1.5) 12.1 (307.8) FS (7.9).04 (1.0) 6.00 (152.4) (38.1) (19.0) FSH40.62 (15.7).04 (1.0).56 (14.2).53 (13.5) 1. (28.0) 3.2 (81.3) FSHH 1.42 (36.0).60 (15.2).04 (1.0) olor FS156- Natural FSH Holder 0 00 FSH40-X Four #8 (M4) Screws 0 S lack FSHH-X Two #8 (M4) Screws 0 3. brasion 4. Spring Wire reakout Harness board spring and spring holder holds wire ends secure while harness is being fabricated Wires simply pull out from spring when harness is removed Each SHH Spring Holder is supplied with one rigid wire piece to hold the spring laterally and two #8 (M4), 2" (50.8mm) hex head wood screws; purchase spring separately.19 (4.8) Dia. PS.44 (11.2).53 (13.4) 1.30 (33.0) Hole Spacing In. mm PS1-X olor SHH PS3-X Two #8 (M4) Screws 0 Steel PS6-X SHH3 Spring Holder 0 SHH1 Spring Holder 0 PS12-X Two #8 (M4) Screws 0 SHH1-S8-X Two #8 (M4) Screws 0 Natural SHH3-S8-X Two #8 (M4) Screws Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in OLD. ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)

5 ELETRIL SOLUTIONS Tie Harness Mounts Designed to be attached to the wire harness during assembly ties can be installed by hand or with Panduit automatic cable tie tools Used with harness board standoff posts 1.54 (39.1) vailable with or without corrugated tubing location tab Natural nylon material for indoor use Heat stabilized nylon material (30) for high temperature applications indoor use.160 (4.1).37 (9.4). 1. Ties 2. ccessories 3. Used with Ties* Maximum Panel Thickness * tie cross section sizes: M = Miniature, I = Intermediate, S = Standard. Panel Hole In. mm In. mm olor FOR ORRUGTED TUING location tab on the mount shelf aligns with the corrugated tubing grooves to ensure proper mount location during assembly THMSP20- M, I, S Natural Push arb 0 00 THMSP20-30 M, I, S Heat Stabilized lack Push arb 0 00 THMSP25- M, I, S Natural Push arb 0 00 THMSP25-30 M, I, S Heat Stabilized lack Push arb 0 00 FOR DISRETE WIRING No location tab THMSP20F- M, I, S Natural Push arb 0 00 THMSP20F-30 M, I, S Heat Stabilized lack Push arb 0 00 THMSP25F- M, I, S Natural Push arb 0 00 THMSP25F-30 M, I, S Heat Stabilized lack Push arb brasion 4. Harness oard Standoff Posts and dapter Used to hold a push mount accessory or cable tie at a specific location on a harness board.50 (12.7) (Dia) Hole H2SP D In. mm In. mm In. mm In. mm For Use With Posts H2SP19-X PLWP, PRWP, WS, VWS, HWS, TPM H2SP25-X PLWP, PRWP, PLP, THMS, HMP, PM dapter HU-X H2SP19-X, H2SP25-X.28 DI (7.2) TYP. 3 PLES HU luminum olt Included luminum olt Included # (M5) Screw D.21 DI (5.3) TYP. 2 PLES ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San For Francisco, technical assistance Main the U.S., Office: call (650) Outside (outside the Local U.S., rea: see inside (800) back cover for directory) 2.51

6 ELETRIL SOLUTIONS. utomatic Tie Mounts 1. Ties 2. ccessories Multiple sizes work with industry standard panel thickness and hole diameters for greater application flexibility Low profile design keeps bundle close to mounting surface, saving space and providing greater protection for bundles in high vibration applications Supports Miniature and Intermediate cross section cable ties brasion 4. TM-W187-M Used with Ties Maximum Panel Thickness uto Tie Mounts work with Reel-fed Ties and utomatic Tooling. See page Panel Hole Range In. mm In. mm In. mm In. mm In. mm olor Natural TM-W187-M20 lack TM-W187-M Heat lack T1.5M- Stabilized XMR, TM-W250-M PLT1.5M- Natural XMR TM-W250-M20 lack TM-W250-M Heat lack Stabilized Harness oard Fixtures utomatic alignment orients the tool head with the mount for reliable feeding of the cable through the mount to speed installation Multiple fixture configurations allow mounting in horizontal, vertical, or 45 orientation Integrated switch* capability enables placement of a switch to detect the mount s presence providing an input to a quality control system ctivation device on harness board fixture prevents tool from operating unless it is properly engaged in the fixture for operator safety 2.38 (60) 2.52 *The Omron Electronics D2SW-3L1HS switch is compatible with the TM system. Similar switches from other manufacturers may also be suitable. See page for Panduit utomatic Tie Installation (64) TM Description olor TM ase Screw base to harness lack board with 1/4" screws TMI-W187-X Insert for TM-W187 mount Snaps into TM Yellow TMI-W250-X Insert for TM-W250 mount Snaps into TM Red cetal TMI-XMR-X Used for cable tie installations where Snaps into TM lack mounts are NOT required TM lamp used to secure the TM (base) in a vertical or 45 position Order number of pieces required, in multiples of Standard Package Quantity (128) Screw clamp to harness board with 1/4" screws lack Prime items appear in OLD. ourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, Main Office: (650) Outside Local rea: (800)