Western & Marine Blocks WESTERN & MARINE BLOCKS. With Product Warnings and Application Information

Size: px

Start display at page:

Download "Western & Marine Blocks WESTERN & MARINE BLOCKS. With Product Warnings and Application Information"

Hillary McCormick
6 years ago
Views:

1 Western & Marine s WESTERN & MARINE BLOCKS With Product Warnings and Application Information

Correct Ordering of Western s IMPORTANT Helpful Information and Recommended Procedure for the Correct Ordering of Western s In selecting bloc s the governing consideration should be the load to be

2 Correct Ordering of Western s IMPORTANT Helpful Information and Recommended Procedure for the Correct Ordering of Western s In selecting bloc s the governing consideration should be the load to be handled rather than diameter or strength of the rope they will support. n multiple sheave bloc s the load is distributed among several parts of the rope whereas the hoo s or shac les on the bloc s have to support the entire load. t is not practical to ma e double bloc s twice as strong and triple bloc s three times as strong as single bloc s since they would be too heavy and needlessly e pensive for general use. WHEN ORDERING, ALWAYS SPECIFY: Letter of Fitting, Series, Letter of Bearing, and. EXAMPLE: For ordering a 4 Wood with Loose Side LatchHook, Common Iron Bearing, simply specify as follows: BLOCK SERIES FITTING LETTER SIZE BEARING LETTER f bloc s are not shown with type of fitting you re uire simply choose letter corresponding to your fitting need and insert where HS appears in the above ex ample. Unless otherwise specified all material will be furnished in galvani ed finish. ll certified single bloc s are proof tested to twice the esultant afe or ing Load and mar ed with a wor ing load e ual to one half the resultant load. ouble bloc s are tested to twice the esultant afe or ing Load and mar ed with a wor ing load e ual to the resultant load. ll bloc s e cept snatch bloc s are furnished with bec et. loc s without bec et on special order only. hen bloc s are used for heavy loads and fast hoisting we strongly recommend roller or bronze bearings in the sheaves. For wire rope blocks, cast steel sheaves are recommended. SPECIAL CUSTOM-MADE BLOCKS... e manufacture a large number of pecial loc s to meet particular re uirements. pecify type bloc diameter of sheave diameter of manila or wire rope to be used and weight of load. 394

The Western Line If today s technology was available over a century ago.

olt style center pin with loc washer and sta ed nut very bloc permanently stamped with the following No

New higher working load limits Painted or galvanized steel Laser cut side plate opens for insertion of

retaining pin ron e bushed sheaves with larger bearing diameter for ex tended block life Lubricated

rope. ncorporates e clusive bolt retaining spring to assure no lost bolts plus utili es secondary

numbers Same working load limits ame fittings available G alvanized steel rade bolts secured with loc

tended block life 301-302-303 STEEL SHELL BLOCKS FOR MANILA ROPE ame stoc washers and sta ed nuts ron

attachment 411-412-413 STEEL SHELL BLOCK FOR SYNTHETIC ROPE ame stoc numbers Same working load limits

sheaves with larger bearing diameter for ex tended block life 21-22-23 WOOD SHELL BLOCKS FOR MANILA

261-262-263 STANDARD STEEL SHELL BLOCKS FOR MANILA ROPE ame stoc numbers Same working load limits

ROPE ame stoc numbers Same working load limits sheaves with larger bearing diameter for ex tended

limits ame fittings available rade bolts secured with loc washers sta er nuts ll si es feature bron e

available upon re uest ew style hanger for fitting attachment vailable with hanger only on fitting upon

3 The Western Line If today s technology was available over a century ago this is the way Western s would have been produced. olt style center pin with loc washer and sta ed nut very bloc permanently stamped with the following No straps Laser burned side plates loc and ope i e 385 WOOD SHELL MANILA ROPE SNATCH BLOCK ew stoc numbers New higher working load limits Painted or galvanized steel Laser cut side plate opens for insertion of rope ncorporates e clusive bolt retaining spring to assure no lost bolts plus utili es secondary retaining pin ron e bushed sheaves with larger bearing diameter for ex tended block life Lubricated center pin and si es utili e steel sheaves 390 STEEL SHELL MANILA ROPE SNATCH BLOCK ew stoc numbers New higher working load limits Painted or galvanized steel Laser cut side plate opens for insertion of rope. ncorporates e clusive bolt retaining spring to assure no lost bolts plus utili es secondary retaining pin ron e bushed sheaves with larger bearing diameter for ex tended block life Lubricated center pin and si es utili e steel sheaves PAINTER S SUPPLY BLOCK FOR MANILA ROPE ame stoc numbers Same working load limits ame fittings available G alvanized steel rade bolts secured with loc washers sta ed nuts eplaceable wood bumpers ron e bushed sheaves with larger bearing diameter for ex tended block life STEEL SHELL BLOCKS FOR MANILA ROPE ame stoc numbers Same working load limits ame fittings available G alvanized steel rade bolts secured with loc washers and sta ed nuts ron e bushed sheaves with larger bearing diameter for ex tended block life ew style hanger for fitting attachment STEEL SHELL BLOCK FOR SYNTHETIC ROPE ame stoc numbers Same working load limits ame fittings available Painted steel rade bolts secured with loc washers and sta ed nuts ron e bushed sheaves with larger bearing diameter for ex tended block life WOOD SHELL BLOCKS FOR MANILA ROPE ame stoc numbers Same working load limits ame fittings available G alvanized steel rade bolts secured with loc washers sta ed nuts eplaceable wood bumpers ron e bushed sheaves with larger bearing diameter for ex tended block life STANDARD STEEL SHELL BLOCKS FOR MANILA ROPE ame stoc numbers Same working load limits ame fittings available Painted steel rade bolts secured with loc washers and sta ed nuts ron e bushed sheaves with larger bearing diameter for ex tended block life STEEL SHELL BLOCKS FOR WIRE ROPE ame stoc numbers Same working load limits ame fittings available Painted steel rade bolts secured with loc washers and sta ed nuts ron e bushed sheaves with larger bearing diameter for ex tended block life DIAMOND PATTERN & OVAL PATTERN BLOCKS ame stoc numbers Same working load limits ame fittings available rade bolts secured with loc washers sta er nuts ll si es feature bron e bushed steel sheaves with larger bearing diameter for ex tended block life Lubricated center pin available upon re uest ew style hanger for fitting attachment vailable with hanger only on fitting upon re uest

4 WESTERN & MARINE BLOCKS HS-21-B Regular Wood for Manila Rope HS-21B, 22B, 23B Regular Wood s for Manila Rope rade bolts secured with loc washers and sta ed nuts. ron e bushed sheaves with larger bearing diameter for e tended bloc life. ec ets furnished on all bloc s. For reeving information, see page eets or e ceeds all re uirements of. including identification ductility design factor proof load and temperature re uirements. mportantly these bloc s meet other critical performance re uirements including fatigue life impact properties and material traceability not addressed by.. HS-21B, 22B, 23B Western Manila Rope s Fitting Sheave 21 B Sheave 22 B Triple Sheave 23 B 4 HS HS HS HS N N N N S S S S itting Type Latch oo wivel oo with Latch ound in nchor hac le 4 Sheave Dimensions Manila * Diam. Center Pin Diam. Rope Triple Triple / / / / *U ltimate Load is times the Steel Shell s for Manila Rope rade bolts secured with loc washers and sta ed nuts. ron e bushed sheaves with larger bearing diameter for e tended bloc life. ew style hanger for fitting attachment. P-303-B Steel Shell for Manila Rope P-301B, 302B, 303B Fitting Sheave 301 B* Sheave 302 B* Triple Sheave 303 B* 4 HS HS HS N N P * earing ode elf Lubricating ronse ushed. itting Type Latch oo wivel oo with Latch crew in nchor hac le 396 P-301B, 302B, 303B Sheave Manila Rope * Diam. Triple Triple / / *U ltimate Load is 3.5 times the

Western Standard Steel s HS-262 Loose Side Hooks with Latch for Manila Rope rade bolts secured with loc washers and sta ed nuts.

Stock No. Stock No. 261 262 263 Triple 261 262 263 Triple 4 HS 1/2 2.25.63 666826 666229 667228 900 1400 1800 1.38 3.21 3.25 5 HS 5/8 3.00.75 666844 666247-1200 1800-2.25 3.88-6 HS 3/4 3.50 1.

Fitting Type : HS - Latch Hook N-411B s for Synthetic Fiber Rope with loose swivel hooks These bloc s are built to carry the increased loads of synthetic fiber ropes.

5 Western Standard Steel s HS-262 Loose Side Hooks with Latch for Manila Rope rade bolts secured with loc washers and sta ed nuts. ron e bushed sheaves with larger bearing diameter for e tended bloc life. HS-262, HA-261, 262, 263 Manila Rope Sheave 261 B 262 B 263 B * Fitting Diam. Stock No. Stock No. Stock No Triple Triple 4 HS 1/ HS 5/ HS 3/ HS 7/ *U ltimate Load is 3 times the. Fitting Type : HS - Latch Hook N-411B s for Synthetic Fiber Rope with loose swivel hooks These bloc s are built to carry the increased loads of synthetic fiber ropes. All hooks are heat-treated alloy steel. ou can now use a smaller si e rope and in turn a smaller bloc providing capacities which were previously not possible. eets or e ceeds all re uirements of. including identification ductility design factor proof load and temperature re uirements. mportantly these bloc s meet other critical performance re uirements including fatigue life impact properties and material traceability not addressed by.. N-411B, 412B, 413B N-411B, 412B, 413B Fitting 411 B* 412 B* 413 B* 4 S S N N * earing ode elf Lubricating ronse ushed. itting Type ound in nchor wivel oo Latch 4 Sheave Synthetic * Fitting Diam. Center Pin Diam. Rope Triple Triple 4 S / S / N / N / *U ltimate Load is times the HW-261B or iameter ire able Sheave : 3 x 3/ 4 x 3/ 8 HW-261 HW Steel s Fitting Catalog No. Bearing Type Wire Rope * * t i m a t e a d i s t i m e s t h e r ki n g a d m i t t t i n g e : - i ve l o k 5 H HW261-B Bronze Bushed 3/ H HW262-B Bronze Bushed 3/ Ul Lo 3 Wo Lo Li. Fi Typ H Sw Ho HW-262B WESTERN & MARINE BLOCKS 397

6 WESTERN & MARINE BLOCKS T-390 Painted STEEL SHELL & WOOD SHELL T-390 Galvanized ew style bloc s feature higher wor ing load limits. ainted or alvani ed steel with replaceable wood bumpers. Laser cut side plate opens for insertion of wire rope. ncorporates e clusive bolt retaining spring to assure no lost bolts plus utili es secondary retaining pin. ron e bushed sheaves with larger bearing diameter for ex tended block life. Western s for Manila Rope T-385 Painted T-385 Galvanized U tilizes Crosby N style hooks with integrated latch. Lubricated center pin. and si es utili e steel sheaves. eets or e ceeds all re uirements of. including identification ductility design factor proof load and temperature re uirements. mportantly these bloc s meet other critical performance re uirements including fatigue life impact properties and material traceability, not addressed by.. 385B, 390B s Wood Shell Steel Shell Fitting 385-B* S.C. 385-B* Galv. 390-B* S.C. 390-B* Galv. 6 T T T T J J J J G G G G * earing ode elf Lubricating ron e ushed ommon ron oller earing itting Type T wivel Latch oo o e and blong wivel ye o e and wivel hac le 385B, 390B s Sheave Manila Rope Drop Side Diam. Bearing Diameter /4-7/ / / / *U ltimate Load is times the. (lbs.*) 398

Western s for Manila Rope T-350-C Gin Gin s for Manila Rope For light hoisting by R oofers and Contractors. urnished with drop forged swivel latch hoo s.

8 12 T 710449 710243 710047 12.00 1.38.88 1 1000 12.7 *U ltimate Load is 3 times the.

7 Western s for Manila Rope T-350-C Gin Gin s for Manila Rope For light hoisting by R oofers and Contractors. urnished with drop forged swivel latch hoo s. 350C, 350B, 350R Gin Sheave Manila Rope * Bearing Fitting T-350-B T-350-R T-350-C Diam. Diam. 8 T / T T *U ltimate Load is 3 times the. earing ode elf Lubricating ron e ushed oller earing ommon ron Fitting Type : T - Swivel Latch Hook HS-130-B HS-130B, HS-135B, P-135B Painter s Supply s for Manila Rope urnished in ron e ushed. For 3/ 4 Manila R ope. Steel Parts are G alvanized. urnished with Loose ide oo s with Latch or hac le. eets or e ceeds all re uirements of. including identification ductility design factor proof load and temperature re uirements. mportantly these bloc s meet other critical performance re uirements including fatigue life impact properties and material traceability not addressed by.. HS-130B, HS-135B, P-135B Fitting Sheave s HS-130 B* HS-135 B* Sheave s P-135 B* 6 HS HS earing ode elf Lubricating ron e ushed Fitting Type : HS - Latch Hook, P= Screw pin anchor shackle. Sheave Manila Rope Resultant * Diam. Center Pin Dia / Ultimate Load is times the esultant or ing. WESTERN & MARINE BLOCKS 399

WESTERN & MARINE BLOCKS Western Regular Wire Rope s DIAMOND & OVAL PATTERN REGULAR WIRE ROPE BLOCKS T-641-B Diamond Pattern Wire Rope 661B Oval Pattern Wire Rope Laser cut painted side plates can be

ew style hanger for fitting attachment vailable with hanger only no fitting. For reeving information, see page 38 5. eets or e ceeds all re uirements of.

8 WESTERN & MARINE BLOCKS Western Regular Wire Rope s DIAMOND & OVAL PATTERN REGULAR WIRE ROPE BLOCKS T-641-B Diamond Pattern Wire Rope 661B Oval Pattern Wire Rope Laser cut painted side plates can be furnished galvani ed upon re uest. rade bolts secured with loc washers and sta ed nuts. ll si es feature bron e bushed steel sheaves with larger bearing diameter for ex tended block life. ew style hanger for fitting attachment vailable with hanger only no fitting. For reeving information, see page eets or e ceeds all re uirements of. including identification ductility design factor proof load and temperature re uirements. mportantly these bloc s meet other critical performance re uirements including fatigue life impact properties and material traceability not addressed by.. Diamond & Oval Pattern Regular Wire Rope s Fitting 641-B Diamond Pattern with Bronze Bushed Steel Sheaves 642-B Diamond & Oval Pattern Regular Wire Rope s Oval Pattern with Bronze Bushed Steel Sheaves 400 Copyright The Crosby Group LLC All Rights Reserved 661-B 662-B 4 T T T T S S S S J J J E E E * itting Type T oo with Latch ound in hac le blong ye wivel hac le ye Diam. Sheave Wire Rope /4 3/ / /4 5/ /4 5/ *U ltimate Load is times the

McKissick Trawl & Try Net s J-452 Oblong Swivel Eye Rig Trawl s teel sheave with flame hardened groove for ma imum wear under abrasive conditions. ouble row permanently sealed tapered roller bearings.

75 16" F-452 130682 20 116 16 3.75 18" J-452 2015467 25 300 18 5.44 22" F-452 130708 30 240 22 3.75 *Ultimate Load is times the or ing. T utili es a anganese teel heave that is not flame hardened.

igure grooved self lubricating bron e bushed sheaves with pressure lube fittings. has an e tra wide throat opening to allow fittings to pass through.

9 McKissick Trawl & Try Net s J-452 Oblong Swivel Eye Rig Trawl s teel sheave with flame hardened groove for ma imum wear under abrasive conditions. ouble row permanently sealed tapered roller bearings. ressure lubrication throughout. ll steel construction. ot ip galvani ed. J452 s Sheave Dia. and No. 452 Stock No. Diam. Sheave Dimensions 8" J " J " F " J " F *Ultimate Load is times the or ing. T utili es a anganese teel heave that is not flame hardened. TRY NET BLOCKS F F J Forged steel swivel eyes. ot ip galvani ed. ressed steel side plates with flared edges. igure grooved self lubricating bron e bushed sheaves with pressure lube fittings. has an e tra wide throat opening to allow fittings to pass through. orged side plates designed to eliminate rope amming. ide throat opening and pressure lube fitting on sheave and eye fitting. orged steel side plates designed to eliminate possibility of rope amming. urnished with sealed tapered bearings. lame hardened forged steel sheaves for wear resistance. 453, 454, s Sheave Dia. and No. Bearing Type *U ltimate Load is 4 times the. Try Net Sheave Dimensions Diameter 6" F-453 Bronze Bushed /4 6" F-454 Needle Bearing /4 8" J-454 Tapered Bearing /8 WESTERN & MARINE BLOCKS 401

WESTERN & MARINE BLOCKS E-566 with Drilled Swivel Eye CARGO HOISTING BLOCKS is galvanized. loc s and larger have flame hardened roll forged sheaves that assure greater wire life.

loc is fitted with tapered roller bearings which ta e both load and side thrusts and hold sheave central so it cannot chafe or wear on the sides.

10 WESTERN & MARINE BLOCKS E-566 with Drilled Swivel Eye CARGO HOISTING BLOCKS is galvanized. loc s and larger have flame hardened roll forged sheaves that assure greater wire life. oll forged sheave is fitted closely into mortise of shell so wire cannot am between sheave and shell. Available for 3/ 4 or 1 wire. loc is fitted with tapered roller bearings which ta e both load and side thrusts and hold sheave central so it cannot chafe or wear on the sides. Tapered R oller bearing with neoprene seals and stainless steel center pin provide long life and trouble free service. tainless steel center pin has recessed nuts with loc washers. wivel fitting has permanently sealed thrust bearing. ressure lubrication fittings are standard on both center pin and swivel. ndividually roof Tested at times or ing Load or times esultant Load.... recogni ed load test certificates are furnished. The or ing Load for cargo hoisting bloc s is the line pull. Western Cargo Hoisting s J-566 with Oblong Swivel Eye 566 Hoisting s Sheave No. 566 Wire Rope 12 E / J / G / K / QG / QK / E / J / QG / QK / PG / PK / E J QG QK PG PK E / J / QG / QK / PG / PK / E J QG QK PG PK or ing Load e uals ma imum single line pull. esultant Load e uals times single line pull. Ultimate Load e uals times the esultant Load. 402

11 Fittings for Western Cargo s QG Swivel Bolt Type Shackle J Oblong Swivel Eye QK Upset Swivel Bolt Type U Goose Neck Swivel Eye Z Non-toppling Guard HEEL AND LEAD BLOCK ADJUSTER FITTINGS (For use with E-566 Cargo s) No. 572 Self-adjuster Fitting with Tension Pin, Cup Spring and Washers. No. 573 Self-adjuster Fitting with Tension Pin, Coil Spring, Cup and Washers. No. 574 Self-adjuster Fitting with Tension Pin, Cup Spring and Washers, and King Pin to fit Pad Eye (can also be furnished with 2 Tension Pins). No. 575 Self-adjuster Fitting with Tension Pin, Cup Spring, and Washer. No. 576 Self-adjuster Fitting with Pad Jaw, King Pin, Tension Pin, Cup Spring and Washers. No. 571 Tension Pin with Cup Spring, Nut and Washers. When ordering Specify: A - Pin Diameter, B -Height of Fitting, and Tension Pin Diameter. No. 570 Tension Pin with Coil Spring, Nut and Washers, Cotter and Cup. WESTERN & MARINE BLOCKS 403

WESTERN & MARINE BLOCKS S-600S Horizontal Lead S-600S / G-600S Horizontal Lead s Available painted or galvanized. Fitted with steel sheaves. elf Lubricated ron e ushed.

00 10 772033 772042 3 5/8 36.0 15.00 10.50 3.25 12 772051 772060 4 3/4 61.0 17.00 12.50 4.00 14 772079 772088 5 7/8 96.0 19.00 14.50 4.00 Ultimate Load is times the esultant or ing.

12 WESTERN & MARINE BLOCKS S-600S Horizontal Lead S-600S / G-600S Horizontal Lead s Available painted or galvanized. Fitted with steel sheaves. elf Lubricated ron e ushed. Western Lead s Sheave 600 Series Resultant Wire Rope Dimensions Diameter S-600-S Painted G-600-S Galv. A B C / /2 1/ / / / Ultimate Load is times the esultant or ing. A B C Vertical Lead s Available painted or galvanized. Fitted with steel sheaves. elf Lubricated ron e ushed. G-601S Vertical Lead S-601S / G-601S Sheave 601 Series Resultant Wire Rope Dimensions Diameter S-601-S Painted G-601-S Galv. C D E F / /2 1/ / / / Ultimate Load is times the esultant or ing. 404

Western Lead s G-602S Flag Lead Flag s Base plates are drilled. Available painted or galvanized. Fitted with steel sheaves. elf lubricated ron e ushed.

75 8 1420885 772426 2-1/2 1/2 31.50 11.38 4.75 5.12 7.00 3.62 2.00 1.00.69 5.50 10 772435 772444 3 5/8 42.00 13.38 5.69 6.06 7.00 4.62 2.00 1.00.69 5.50 12 772453 772462 4 3/4 115.00 17.25 7.25 7.75 10.

13 Western Lead s G-602S Flag Lead Flag s Base plates are drilled. Available painted or galvanized. Fitted with steel sheaves. elf lubricated ron e ushed. S-602S / G-602S Flag s Sheave Diameter 602 Series Resultant Wire Rope Dimensions S-602-S Painted G-602-S Galv. G H J K L M N P R / /2 1/ / / / *Ultimate Load is 4 times the Resultant. 603 Series S-603S Hinged Lead S-603S / G-603S Hinged Lead s Hinged Lead s Base plates are not drilled. Available painted or galvanized. elf lubricated ron e earings. Resultant Wire Rope Dimensions Sheave Diameter S-603-S Painted G-603-S Galv. S T U V W X Y Z / /2 1/ / / / *Ultimate Load is 4 times the Resultant. WESTERN & MARINE BLOCKS 405

WESTERN & MARINE BLOCKS 461 Vertical Lead Furnish the following important information when ordering: A,B and C dimensions. Line pull in pounds and degree of wrap. Line speed. iameter of wire rope.

14 WESTERN & MARINE BLOCKS 461 Vertical Lead Furnish the following important information when ordering: A,B and C dimensions. Line pull in pounds and degree of wrap. Line speed. iameter of wire rope. oller bearings bron e bushings or sealed double row tapered bearings. 461 Vertical & 463 Horizontal Lead s Sheave Diameter Standard Wire Rope McKissick Horizontal & Vertical s Dimensions 463 Horizontal Lead Guide and control your deck lines with McKissick s deck-mounted wire rope blocks. Built to your specific requirements. tra heavy construction built to withstand brea ing strength of indicated rope. Flame-hardened sheaves, machined grooves for proper rope size. or special re uirements contact rosby. Figure No. Lead A B C D / / / / / / / / / or custom orders contact our loc otline or reference the special re uest form on pg. 457 Deck Mounted Anchor Fairleader Deck Mounted Anchor Fairleader arrel and sheaves e uipped with sealed double row tapered bearings. tra heavy construction built to withstand brea ing strength of indicated rope at 9 0 degree sheave wrap and 4 5 degree head swing. ll bearings lemite lubricated. ustom nchor airleader sets available Deck Mounted Anchor Fairleader Sheave Diameter Wire Rope Dimensions Figure No. 457 A B C D E F G H J K L M B-10-D B-12-D / B-16-D / B-20-D / B-24-D

Western Wire Rope s NEW STYPE OVAL PATTERN CONSTRUCTION BLOCKS Q-681-Z Q-682-Z Q-683-Z All blocks are galvanized. heave lubricated through pressure lube fitting in center pin.

15 Western Wire Rope s NEW STYPE OVAL PATTERN CONSTRUCTION BLOCKS Q-681-Z Q-682-Z Q-683-Z All blocks are galvanized. heave lubricated through pressure lube fitting in center pin. ssembled with self lubricated bron e bushing. ombines weight of regular oval bloc s with strength of e tra heavy oval blocks. Assembled with bolt type anchor shackle. ide plates are rounded to provide additional stiffness and reduce wear and chaffing of the rope. Q-681-Z / Q-682-Z / Q-683-Z Q Fitting Bronze Bushed Steel Sheaves Q-681-Z Q-682-Z Q-683-Z 6 Q Q Q Q Fitting Type : - Bolt Type Anchor Shackle Q-681-Z / Q-682-Z / Q-683-Z Sheave Dimensions Diam. Center Pin Dia. Wire Rope Triple Triple / / / / Ultimate Load is times the or ing. earing ode elf Lubricating ron e ushed with pressure lube fitting. S-2131 Trawling Shackles S-2131 Trawling Shackles 4 Dimensions Tolerance Nominal Shackle D S /- (t)* A B C D E F G K M G A 1/ /8 3-1/ /4 4-3/ /8 6-1/ *U ltimate Load is times the. WESTERN & MARINE BLOCKS 407

WESTERN & MARINE BLOCKS FOR MANILA OR WIRE ROPE BLOCKS HS

Oblong Swivel Eye G Yoke and Swivel Shackle K Oblong Swivel

Fittings L Shackle Link Shackle O Bolt Type Chain Shackle P

Swivel Shackle CK Loose Swivel Eye and Upset Shackle CP

16 WESTERN & MARINE BLOCKS FOR MANILA OR WIRE ROPE BLOCKS HS Reverse Eye Hook E Yoke and Swivel Shackle Eye J Yoke and Oblong Swivel Eye G Yoke and Swivel Shackle K Oblong Swivel Eye and Upset Shackle S Round Pin Anchor Shackle Western Fittings L Shackle Link Shackle O Bolt Type Chain Shackle P Screw Pin Anchor Shackle Q Bolt Type Anchor Shackle CG Loose Swivel Shackle CK Loose Swivel Eye and Upset Shackle CP Screw Pin Chain Shackle LJ Loose Swivel Jaw SS Upset Shackle in Shackle 408

McKissick 380 Series Easy Reeve Crane Blocks

McKissick 380 Series Easy Reeve Crane Blocks Standard block configurations can be from a single sheave design to a five sheave design. Available from 5 to 80 metric tons. Larger models and configurations