Sheave Blocks. Sheave Block Use and Maintenance. Use and Maintenance. Section 7. Reeving of Sheave Blocks
|
|
- Brianna Ryan
- 5 years ago
- Views:
Transcription
1 Use and Maintenance Block Use and Maintenance Load ratings on all SuperLift sheave blocks are applicable to new or as new products only and apply to the maximum load which may be supported by the head fitting, under usual environmental conditions, shock loadings must be taken into account when selecting sheave blocks, as these loads are much greater than static loads. The W.L.L. or safety factor on all SuperLift products may be affected by wear, misuse, overloading, deformation, corrosion or other conditions, regular inspection must be carried out to determine whether use can be continued or the product withdrawn from service. Experienced trained personnel familiar with tackle systems should rig SuperLift sheave blocks. WORKING LOAD LIMIT - The maximum load or force the product is authorized to support in a particular service. PROOF LOAD - The average force to which a product may be subjected to before deformation occurs. SHOCK LOAD - A force that results from the rapid acceleration of a static load eg, jerking, these loads adds significantly to the static load. STATIC LOAD - A constantly applied force or load. Reeving of Blocks When reeving a pair of sheave blocks one of which has more than two sheaves, the lead line should come off one of the centre sheaves of the upper block to prevent toppling of the upper block and possible damage to the rope. Always start reeving from the becket and avoid chafing the rope on the side plates. When you have completed reeving, the bottom block must be at right angles to the top block as in Figure 1. The upper block has a greater hook load due to the pull on the lead rope. The sheaves in these blocks revolve at different speeds, those nearest the lead line rotate at the highest speed and therefore wear out faster. For applications which require heavy lifting or high speed operation, bronze bushes or roller bearings should be specified when ordering. Figure 1. Loads on Blocks The total load on a sheave block can be much greater than the actual load being lifted or pulled. Multiply the following factors by the line pull to obtain the total load on the block. ANGLE FACTOR ANGLE FACTOR ANGLE FACTOR ANGLE FACTOR Section 7 We have the right product, at the right price, when you need it, on-time, every time Page 1
2 Hand Operated Blocks Hand Operated Blocks to AS2089 blocks range from 63mm dia to 254mm dia Hand operated and 152mm dia to 450mm single, double and treble configurations. blocks incorporate the following features: - Safety latch fitted to hook as standard - Drop forged swivel or - Cast iron and steel machined sheaves to suit either wire rope or manilla (fibre) rope - Power operated sheaves are fitted with high capacity bushes - Power operated axles are fitted with a grease nipple to enable pressure grease lubrication - Identification labels to show capacities and other relevant details - Painted SuperLift blue enamel Optional Extras: - Hand operated sheaves can be fitted with high capacity bushes or bearings - Different wire rope sizes other than standard - Specialized s - with ball or roller bearing - with special grooves - Manufactured out of steel or other materials - Special surface finish e.g., Oxo-sealed, Zinc plated, Galvanizing etc. - blocks can be manufactured to suit any application. - Test certificates only if requested at time of order. DANDENONG TEL (03) FAX (03) CAMPBELLFIELD TEL (03) FAX (03) KILSYTH TEL (03) FAX (03) info@keblestrading.com.au LAVERTON TEL (03) FAX (03) Page 2
3 dia (G) WLL Single 250 Double 250 Treble 250 Snatch 250 Single 250 Double 250 Treble 250 Snatch 250 dia (mm) Manilla 10 Wire 5 Manilla 10 Wire 5 Manilla 10 Wire 5 Manilla 10 Wire 5 Manilla 12 Wire 6 Manilla 12 Wire 6 Manilla 12 Wire 6 Manilla 12 Wire 6 Head Fitting SBH-001-ME SBH-001-MH SBH-001-WE SBH-001-WH SBH-002-ME SBH-002-MH SBH-002-WE SBH-002-WH SBH-003-ME SBH-003-MH SBH-003-WE SBH-003-WH SBH-004-ME SBH-004-MH SBH-004-WE SBH-004-WH SBH-011-ME SBH-011-MH SBH-011-WE SBH-011-WH SBH-012-ME SBH-012-MH SBH-012-WE SBH-012-WH SBH-013-ME SBH-013-MH SBH-013-WE SBH-013-WH SBH-014-ME SBH-014-MH SBH-014-WE SBH-014-WH Bush Fitted A B C D E F Yes Yes Yes Yes Yes Yes Yes Yes Section 7 We have the right product, at the right price, when you need it, on-time, every time Page 3
4 dia (G) WLL Single 250 Double 250 Treble 250 Snatch 250 Single 500 Double 750 Treble 750 Snatch 500 Single 750 Double 750 dia (mm) Manilla 14 Wire 7 Manilla 14 Wire 7 Manilla 14 Wire 7 Manilla 14 Wire 7 Manilla 16 Wire 8 Manilla 16 Wire 8 Manilla 16 Wire 8 Manilla 16 Wire 8 Manilla 18 Wire 9 Manilla 18 Wire 9 Head Fitting SBH-021-ME SBH-021-MH SBH-021-WE SBH-021-WH SBH-022-ME SBH-022-MH SBH-022-WE SBH-022-WH SBH-023-ME SBH-023-MH SBH-023-WE SBH-023-WH SBH-024-ME SBH-024-MH SBH-024-WE SBH-024-WH SBH-031-ME SBH-031-MH SBH-031-WE SBH-031-WH SBH-032-ME SBH-032-MH SBH-032-WE SBH-032-WH SBH-033-ME SBH-033-MH SBH-033-WE SBH-033-WH SBH-034-ME SBH-034-MH SBH-034-WE SBH-034-WH SBH-041-ME SBH-041-MH SBH-041-WE SBH-041-WH SBH-042-ME SBH-042-MH SBH-042-WE SBH-042-WH Treble 1000 Manilla 18 SBH-043-ME SBH-043-MH Snatch 750 Wire 9 Manilla 18 Wire 9 SBH-043-WE SBH-043-WH SBH-044-ME SBH-044-MH SBH-044-WE SBH-044-WH Bush Fitted A B C D E F Yes Yes Yes Yes Option Option Option Option Option Option Option Option DANDENONG TEL (03) FAX (03) CAMPBELLFIELD TEL (03) FAX (03) KILSYTH TEL (03) FAX (03) info@keblestrading.com.au LAVERTON TEL (03) FAX (03) Page 4
5 dia (G) WLL dia (mm) Head Fitting Bush Fitted A B C D E F Kg Single 1000 Manilla 20 Wire 10 SBH-051-ME SBH-051-MH SBH-051-WE SBH-051-WH Double 1000 Manilla 20 SBH-052-ME SBH-052-MH Wire 10 SBH-052-WE SBH-052-WH Treble 1000 Manilla 20 SBH-053-ME SBH-053-MH Wire 10 SBH-053-WE SBH-053-WH Snatch 1000 Manilla 20 SBH-054-ME SBH-054-MH Single 1000 Wire 10 Manilla 24 Wire 12 SBH-054-WE SBH-054-WH SBH-061-ME SBH-061-MH SBH-061-WE SBH-061-WH Double 1500 Manilla 24 SBH-062-ME SBH-062-MH Treble 2000 Wire 12 Manilla 24 Wire 12 SBH-062-WE SBH-062-WH SBH-063-ME SBH-063-MH SBH-063-WE SBH-063-WH Snatch 1000 Manilla 24 SBH-064-ME SBH-064-MH Wire 12 SBH-064-WE SBH-064-WH Single 1500 Manilla 28 SBH-071-ME SBH-071-MH Double 2000 Treble 2000 Wire 14 Manilla 28 Wire 14 Manilla 28 Wire 14 SBH-071-WE SBH-071-WH SBH-072-ME SBH-072-MH SBH-072-WE SBH-072-WH SBH-073-ME SBH-073-MH SBH-073-WE SBH-073-WH Snatch 1500 Manilla 28 SBH-074-ME SBH-074-MH Wire 14 SBH-074-WE SBH-074-WH Option Option Option Option Option Option Option Option Option Option Option Option Section 7 We have the right product, at the right price, when you need it, on-time, every time Page 5
6 dia (G) WLL dia (mm) Head Fitting Single 2000 Manilla 32 SBH-081-ME SBH-081-MH Double 3000 Wire 16 Manilla 32 Wire 16 SBH-081-WE SBH-081-WH SBH-082-ME SBH-082-MH SBH-082-WE SBH-082-WH Treble 4000 Manilla 32 SBH-083-ME SBH-083-MH Wire 16 SBH-083-WE SBH-083-WH Snatch 2000 Manilla 32 SBH-084-ME SBH-084-MH Single 2500 Double 4000 Wire 16 Manilla 36 Wire 18 Manilla 36 Wire 18 SBH-084-WE SBH-084-WH SBH-091-ME SBH-091-MH SBH-091-WE SBH-091-WH SBH-092-ME SBH-092-MH SBH-092-WE SBH-092-WH Treble 4000 Manilla 36 SBH-093-ME SBH-093-MH Snatch 2500 Single 3000 Double 4000 Treble 5000 Snatch 3000 Wire 18 Manilla 36 Wire 18 Manilla 40 Wire 20 Manilla 40 Wire 20 Manilla 40 Wire 20 Manilla 40 Wire 20 SBH-093-WE SBH-093-WH SBH-094-ME SBH-094-MH SBH-094-WE SBH-094-WH SBH-101-ME SBH-101-MH SBH-101-WE SBH-101-WH SBH-102-ME SBH-102-MH SBH-102-WE SBH-102-WH SBH-103-ME SBH-103-MH SBH-103-WE SBH-103-WH SBH-104-ME SBH-104-MH SBH-104-WE SBH-104-WH Bush Fitted A B C D E F Kg. Option Option Option Option Option Option Option Option Option Option Option Option DANDENONG TEL (03) FAX (03) CAMPBELLFIELD TEL (03) FAX (03) KILSYTH TEL (03) FAX (03) info@keblestrading.com.au LAVERTON TEL (03) FAX (03) Page 6
7 dia (A) dia (mm) Hand Operated s to AS 2089 Wire 5 SBH Manilla 10 SBH Wire 6 SBH Manilla 12 SBH Wire 7 SBH Manilla 14 SBH Wire 8 SBH Manilla 16 SBH Wire 9 SBH Manilla 18 SBH Wire 10 SBH Manilla 20 SBH Wire 12 SBH Manilla 24 SBH Wire 14 SBH Manilla 28 SBH Wire 16 SBH Manilla 32 SBH Wire 18 SBH Manilla 36 SBH Wire 20 SBH Manilla 40 SBH Standard pkt. size Bush Fitted as standard **B C D Kg. 10 Yes Yes Yes Option Option Option Option n/a Option n/a Option n/a Option n/a Option Heavy Duty s 100 Wire SSB Yes Wire SSB Yes Wire SSB15018 n/a Yes Wire SSB20020 n/a Yes Wire 22 SSB25022 n/a Yes Wire 26 SSB30026 n/a Yes Wire 28 SSB35028 n/a Yes Wire 32 SSB40032 n/a Yes Wire 32 SSB45032 n/a Yes Section 7 We have the right product, at the right price, when you need it, on-time, every time Page 7
8 Snatch Blocks Snatch blocks are generally used in the construction, heavy recovery and shipping industries. CAPACITY blocks most commonly used for equalizer applications. Snatch Blocks incorporate the following features: - Lightweight heavy-duty construction. - Special high capacity bushes and grease nipples fitted as standard. - Quick snatch action also c/w safety locking clip. - Safety screw pins fitted as standard. - Choose from a variety of head fittings. - Supplied painted SuperLift Industrial grey enamel. - Spare parts are always available. dia (G) Wire dia (mm) WLL Ty pe A B C D E Swivel Shackle SSB100S SSB100H Toggle SSB100T Only SSB Swivel Shackle SSB150S SSB150H Toggle SSB150T Only SSB Swivel Shackle SSB150S SSB150H Toggle SSB150T Only SSB Swivel Shackle SSB200S SSB200H Toggle SSB200T Only SSB Swivel Shackle SSB250S SSB250H Toggle SSB250T Only SSB Swivel Shackle SSB300S SSB300H Toggle SSB300T Only SSB Swivel Shackle SSB350S SSB350H Toggle SSB350T Only SSB Swivel Shackle SSB400S SSB400H Toggle SSB400T Only SSB DANDENONG TEL (03) FAX (03) CAMPBELLFIELD TEL (03) FAX (03) KILSYTH TEL (03) FAX (03) info@keblestrading.com.au LAVERTON TEL (03) FAX (03) Page 8
9 Manually operated PWB s and Blocks These manually operated s and Blocks have been specifically designed for use with manilla and wire rope. With fully interchangeable sheaves to minimise storage problems, and supplied with either drop forged swivel hooks or eyes, this practical and versatile range comes with beckets standard on all single and double blocks. Bronze bushes and safety latches are also standard across the range. General Information Diameter (mm) Dia - Manilla (mm) Dia - Wire (mm) Axle Dia (mm) Boss Width (mm) Snatch Blocks Diameter (mm) Capacity 250kg 250kg 500kg 1 tonne 1 tonne 2 tonne Single Block Diameter (mm) Capacity 250kg 250kg 500kg 1 tonne 1 tonne 2 tonne Double Block Diameter (mm) Capacity 250kg 250kg 500kg 1 tonne 1 tonne - s Only Diameter (mm) Section 7 We have the right product, at the right price, when you need it, on-time, every time Page 9
10 Notes DANDENONG TEL (03) FAX (03) CAMPBELLFIELD TEL (03) FAX (03) KILSYTH TEL (03) FAX (03) LAVERTON TEL (03) FAX (03) Page 10
McKissick 380 Series Easy Reeve Crane Blocks
McKissick 380 Series Easy Reeve Crane Blocks Standard block configurations can be from a single sheave design to a five sheave design. Available from 5 to 80 metric tons. Larger models and configurations
More informationBlock and Ball Inspection Checklist
Block and Ball Inspection Checklist 01/16 P/N 67688 Rev. 1 Page 2 of 8 Block and Ball Inspection Checklist The purpose for the inspection check list is to provide a quick reference for checking the integrity
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationGeology, Prospectors, Mining, Metallurgy, Assaying, Environmental, Geotechnical
LEGEND INC. Geology, Prospectors, Mining, Metallurgy, Assaying, Environmental, Geotechnical 988 Packer Way Sparks, NV 89431 Tel: (786) 786-3003 Fax: (775) 786-3613 Email: info@lmine.com Web: www.lmine.com
More informationP4044. Stainless Female Lifting Eye Bolts metric sizes. Lifting Bolts & Shackles. Tel: Fax:
Stainless Female Lifting Eye Bolts metric sizes Lifting Bolts & Shackles P4044 Material Stainless steel (A4, AISI 316). CE marked. Technical notes To DIN 582. When using lifting eye bolts it is critical
More informationDecide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)
Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel
More informationSwivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
More informationWestern & Marine Blocks WESTERN & MARINE BLOCKS. With Product Warnings and Application Information
Western & Marine s WESTERN & MARINE BLOCKS With Product Warnings and Application Information Correct Ordering of Western s IMPORTANT Helpful Information and Recommended Procedure for the Correct Ordering
More informationC-Clamps and Lifting Eyes (Eye Bolts)
0-C-Clamps & Lifting Eyes-R 2/21/08 9:42 PM Page 1 C-Clamps A B C Armstrong C-Clamps When your requirements call for clamps, specify Armstrong the most accepted name in the business. When you see Armstrong
More informationOperating Instructions and Parts Manual L-100 Series Hand Chain Hoists
Operating Instructions and Parts Manual L-100 Series Hand Chain Hoists For L100-200 serial no. 15070001 and higher For L100-300 serial no. 15070043 and higher For L100-1500 serial no. 15070088 and higher
More informationRELIABLE JAW CRUSHER CRUSHING ENGLISH
RELIABLE JAW CRUSHER CRUSHING ENGLISH THE FIELDS OF APPLICATION Jaw crushers are used for primary crushing of a wide variety of materials in the mining, iron and steel and pit and quarry industries. Furthermore
More informationSwivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
More informationCANE FEED & WASHING TABLE CHAINS
Chains in Cane Feed and Washing Table conveyors are exposed to a highly corrosive, abrasive environment and heavy shock loads. Viking Chains offer several different options to meet these requirements:
More informationWorkshop Solutions PULLERS & SEPARATORS.
Workshop Solutions PULLERS & SEPARATORS Churchbridge Works - Walsall Road, Cannock, Staffordshire, UK. WS11 8JR Tel: +44 (0) 1922 702222 Fax: +44 (0) 1922 702223 E-mail: sales@sykes-pickavant.com SP07/01-PULLER
More informationWhat is Wire Rope? Understanding the Specifications and Construction
Monday, February 5, 2018 / Categories: Blog What is Wire Rope? Understanding the Specifications and Construction Wire rope is a complex piece of mechanical machinery with a number of different specifications
More informationMcKissick Oilfield Servicing Equipment. 70 & 80 Series Tubing Blocks
McKissick Oilfield Servicing Equipment 70 & 80 Series Tubing Blocks. Maintenance Requirements Disassembly Instructions Requirements Maintenance Alerts Crosby Products Distributed by: Table of Contents
More informationWIRE ROPE LUBRICATING SYSTEM
PROVIDES FAST AND EFFECTIVE CLEANING AND LUBRICATION OF WIRE ROPES BY FORCING QUALITY LUBRICANT UNDER HIGH PRESSURE TO THE CORE OF THE WIRE ROPE WIRE ROPE LUBRICATING SYSTEM 13 TS BENEFITS: Lightweight,
More informationChoosing the right puller for the job. Types of Puller
Pullers Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality
More informationINSTALLATION INSTRUCTIONS ROPE ASSEMBLIES FATZER AG WITH HYEND SOCKETS FOR FROM. Kai-J. Thiem (THK) Martin Bechtold (BEM)
INSTALLATION INSTRUCTIONS FOR ROPE ASSEMBLIES WITH HYEND SOCKETS FROM FATZER AG Created Kai-J. Thiem (THK) Checked Martin Bechtold (BEM) Released Kai-J. Thiem (THK) Version 2.0 Date 30.08.2016 Proof of
More informationDRILLING & WORKING TOOLS
EAGLE EQUIPMENT SUPPLIES & SERVICES PTE LTD 48 Toh Guan Road East #06-107 Enterprise Hub, Singapore 608586 Tel : (65) 6795 2411 Fax: (65) 6795 5877 Email: eesss@singnet.com.sg Company Registration (UEN)
More informationRalphs-Pugh Co. I didn t know you did all that!
Ralphs-Pugh Co. I didn t know you did all that! Ralphs-Pugh Co. The Ralphs-Pugh Company has been keeping industry on the move for over 50 years. We are an innovative supplier that distinguishes itself
More informationOperating Instructions and Parts Manual Lever Operated Chain Hoist JLH Series
Operating Instructions and Parts Manual Lever Operated Chain Hoist JLH Series 1 Ton model shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-275050 Ph.: 800-274-6848 Revision H3 07/2018
More informationDown Stage Right -Theatrical and Entertainment Rigging Supplies
Shackle Plates There are five uniquely different designs in the Shackle Plates Dynasty. Each one allows you the freedom of choice as you design the rigging requirements of your scenery, as well as meeting
More informationOperating Instructions and Parts Manual L-100 Series Hand Chain Hoists
Operating Instructions and Parts Manual L-100 Series Hand Chain Hoists For L100-200 serial no. 15070001 and higher For L100-300 serial no. 15070043 and higher For L100-1500 serial no. 15070088 and higher
More information(03) General Engineering Fitting Boring Milling Turning Fabrication Welding
(03) 5979 3660 www.steg.com.au General Engineering Fitting Boring Milling Turning Fabrication Welding www.youtube.com/c/ StegAuEngineering www.facebook.com/s Introducing Steg Engineering Pty. Ltd. Steg
More informationClamps. Preformed Clamping Systems. Clamps. Band-It. Band-It
Preformed Clamping Systems As industrial hose made of stiffer, thinner, thermoplastics replace soft, spongy, thickwalled rubber, a new generation of hose clamps has been developed to prevent leak problems.
More informationOWNER'S MANUAL TIE ROD, WALL & FLOOR MOUNTED JIBS. Model JIB-HC, JIB-LC, JIB-FM
Vestil Manufacturing Company 999 N. Wayne Street, P.O. Box 507 Angola, IN 6703 USA Phone (60) 665-7586 Fax (60) 665-339 sales@vestil.com www.vestil.com Revised 09-0 A company dedicated to solving ergonomic
More informationMODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
More informationT A G PIPE ALIGNMENT CLAMPS PIPE EQUIPMENT SPECIALISTS LTD WB ALLOY WELDING PRODUCTS LTD WB ALLOY WELDING PRODUCTS LTD
WB ALLOY WELDING PRODUCTS LTD T A G PIPE EQUIPMENT SPECIALISTS LTD PIPE ALIGNMENT CLAMPS WB ALLOY WELDING PRODUCTS LTD E-Z FIT RED Pipe welding clamp 1-12 o/d Quick and E-Z to use Rugged frame, built for
More informationN.A. Woodworth. Universal Ball-Lok (UBL) Chuck. The Original. Workholding Worldwide
N.A. Woodworth Workholding Worldwide The Original Universal Ball-Lok (UBL) Chuck Universal Ball-Lok (UBL) Chuck N.A. Woodworth s comprehensive line of workholding begins with the UBL. It is The Original
More informationAlloy S-320A S-320AN S.C.
S-320 EYE HOOK Crosby Eye Hooks All Crosby 320 Eye Hoist Hooks incorporate the following features: The most complete line of Eye hoist hooks. Available in carbon steel and alloy steel. Designed with a
More informationCrosby Grade 100 Eye Sling Hooks
CHAIN & ACCESSORIES L-1327 Eye Sling Hook Forged Alloy Steel - Quenched and Tempered. Each hook has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby
More informationArchitectural Door Accessories. Markar Continuous Hinges
Architectural Door Accessories Why Continuous Hinges? Hinge failure most commonly begins when doors are opened beyond stop device limits. The resulting kickback shock to the hinges can surpass 1000 lbs.
More informationChain, Rope & Accessories
A Perry Product Guide A range of both steel and plastic chain, including accessories. This range includes:- Steel Chain Plastic Chain Security Chain Accessories for Plastic Chain Accessories for Steel
More informationINSTRUCTIONS. GP Catamaran Mainsheet System. Description and Features
INSTRUCTIONS GP Catamaran Mainsheet System N5W4983 Bluemound Road Pewaukee, WI 5307 U.S.A. Telephone: (6) 69-330 Fax: (6) 70-5780 Web: www.harken.com Email: harken@harken.com Description and Features Low
More informationRoller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3
More informationWire Rope Page
Wire Rope Page 1 2013 Stainless Steel Wire Rope And Cable Stainless Steel Wire Rope Tel: 0845 519 0650 Page 2 Stainless Steel Cable Stainless Steel 1x19, A4-AISI 316 (Non-Flexible) 1570 Tensile Strength,
More informationPARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
More informationCHAINSAW SHARPENER MODEL: ECSS-1
CHAINSAW SHARPENER MODEL: ECSS-1 Part No: 3402075 ASSEMBLY & INSTRUCTION MANUAL LS0409 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that
More informationHandle Length (in.) Ultimate Load (lbs.) Weight Each (lbs.)
L-150 Lever Type Binder Lebus Binders Extra heavy construction at leverage point to prevent spreading. Heel of binder toggles away from load, permitting easy release. Ball and socket swivel joints at hook
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationWheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
More informationOperating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table
Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright
More informationThe Original UBL. N.A. Woodworth. Universal Ball-Lok Chuck SUPPORTED BY FORKARDT. Workholding Worldwide
The Original N.A. Woodworth Workholding Worldwide SUPPORTED BY FORKARDT UBL Universal Ball-Lok Chuck Universal Ball-Lok (UBL) Chuck N.A. Woodworth s comprehensive line of workholding begins with the UBL.
More information767, 777, DC-10, L-1011, MD-11 Tow Bar Equipment Manual
514 MECKLEM LANE, ELLWOOD CITY, PENNSYLVANIA 16117 www.hallindustries.com E-mail: service@hallindustries.com 767, 777, DC-10, L-1011, MD-11 Tow Bar Equipment Manual Use This Manual for 1. Operating Procedures
More informationPLATE LIFTING CLAMPS
LIFTING YOUR USINESS TO HIGHER LEVEL LIFTING YOUR USINESS TO HIGHER LEVEL LIFTING YOUR USINESS TO HIGHER LEVEL PLTE LIFTING LMPS Operational Instruction Manual Universal Plate lamp Model: UP-1 Horizontal
More information24 GA. PITTS ROLLFORMER
1 TIN KNOCKER 24 GA. PITTS ROLLFORMER INSTRUCTIONS & PARTS DIAGRAM Shown with Stand and Optional Flanging Attachment Rev. 092606 TAAG MACHINERY CO. (Master Distributor) 1257-B Activity Dr. Vista, CA 92081
More informationSECTION 9.0 MAINTENANCE
SECTION 9.0 MAINTENANCE SECTION 9.1 GENERAL MAINTENANCE CLEANLINESS IS THE KEY TO THE PERFECT STO-AWAY KEEP DIRT, MUD, AND SALT FROM BUILDING UP ON YOUR STO-AWAY If you have a pressure washer, use it to
More informationENGINEERED PRODUCTS FOR THE ENERGY INDUSTRIES
ENGINEERED PRODUCTS FOR THE ENERGY INDUSTRIES VERSATILE PRODUCTS WITH SAFETY & EFFICIENCY IN MIND Custom manufactured from initial chemistry to end components, Nylacast Engineered Products help to deliver
More informationCENTRIFUGAL PUMPS FRAME MOUNT 13" FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pullout design; can be rotated for ease of installation; 6 x 8-13 and 8 x 10-13 are split volutes for reduction in radial bearing load Impeller:
More informationYALE FIGURE 500 & 500R CLOSURE OPERATION AND MAINTENANCE INSTRUCTIONS
YALE FIGURE 500 & 500R CLOSURE OPERATION AND MAINTENANCE INSTRUCTIONS IMPORTANT INFORMATION Note To Supervisor: Please share this information with your employees and make sure they have received training
More informationFITTING INSTRUCTIONS FOR THE NOVA LIFT TM FIRST, PLEASE READ THESE INSTRUCTIONS CAREFULLY!
Forespar Products Corp. 22322 Gilberto Rancho Santa Margarita, CA 92688 Phone 949-858-8820 Fax 949-858-0505 Email sales at forespar.com www.forespar.com FITTING INSTRUCTIONS FOR THE NOVA LIFT TM FIRST,
More informationRECOMMENDED SPARE PARTS FOR NORMAL ONE (1) YEAR OPERATION OF VD CRUSHER
RECOMMENDED SPARE PARTS FOR NORMAL ONE (1) YEAR OPERATION OF VD CRUSHER 2 ea. VD-65 Toggle 2 ea. VD-70A Right Hand Bearing Split Bushing 2 ea. VD-70B Left Hand Bearing Split Bushing 2 ea. VD-82 Plate for
More informationsouthpaw enterprises, inc.
southpaw enterprises, inc. Store these instructions with the enclosed maintenance checklist in a safe place. You may also access them on our website. Instruction Sheet Prefab Joist 3 Ft. Drop Ceiling Kit
More informationMANUAL SEALLESS STEEL STRAPPING TOOL MODEL A332
OPERATION MANUAL / SPARE PARTS LIST MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A332 13.2250.01 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 WARRANTY CONDITIONS AND LIABILITY 3 3 APPROPRIATE USE 3 4 TECNICAL DATA
More informationCompany profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS
Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing
More informationHigh-precision inch guide units Made in Germany
High-precision inch guide units Made in Germany cm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 cm inch inch 1 2 3 4 5 6 7 8 STEINEL All you need for tools Your partner for punching and bending
More informationMANUAL SEALLESS STEEL STRAPPING TOOL MODEL A335
OPERATION MANUAL / SPARE PARTS LIST MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A335 13.2810.01 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 WARRANTY CONDITIONS AND LIABILITY 3 3 APPROPRIATE USE 3 4 TECNICAL DATA
More informationEURO-BEARINGS LTD COMBINED ROLLER BEARINGS & MATING STEEL PROFILES
EURO-BEARINGS LTD & MATING STEEL PROFILES For fork lift trucks, overhead cranes, track conveyors and heavy duty linear motion systems... The axial (side thrust) roller runs on the web of the channel whilst
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More information2. Inspect the end yoke bores for wear and damage. Replace if necessary.
SERVICE INSTRUCTIONS BEFORE DOING ANY SERVICE OR MAINTENANCE WORK ON THE MACHINE, YOU MUST: Disengage all power Shut off the tractor engine LOOK and LISTEN! Make sure all moving parts are stopped. Disconnect
More informationBICO BADGER 5" X 7" JAW CRUSHER OPERATING INSTRUCTIONS
BICO BADGER 5" X 7" JAW CRUSHER OPERATING INSTRUCTIONS The Bico Badger Jaw Crusher is designed to give long and efficient service. In order to secure the long life and excellent performance, which your
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationHAND TOOLS TWEEZERS. vice - DRILL PRESS
Torque Wrenches & Inserts Clicking torque wrench with mount for interchangeable socket tools, rapid accurate setting using QuickSelect quick-action adjuster, with Quick Release safety lock, double stop
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationOVEN RACK GUIDE for BAKING PROFESSIONALS
OVEN RACK GUIDE for BAKING PROFESSIONALS ADAMATIC...3 BAKERS AID...3-4 B-Lift...3 Pin...4 LUCKS...4 BAXTER...5 Advantage 1 Oven B-Lift...5 Advantage 2 Oven B-Lift...5 REVENT...6 A-Lift...6 C-Lift...6 GEMINI...7
More informationSales and Service
OPERATION MANUAL / SPARE PARTS LIST MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A333 13.2370.01 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 WARRANTY CONDITIONS AND LIABILITY 3 3 APPROPRIATE USE 3 4 TECNICAL DATA
More information.com More than a machine. Power your life
Heavy Duty Swivel Head Bed-Type Universal Milling Machine Ideal for Machining Large Work-pieces This kind of MM-KB2100 is the Heavy Duty Swivel Head Bed-Type Universal Milling Machine featuring large cross
More informationISH-R150 MANUAL ROCKWELL HARDNESS TESTER OPERATION MANUAL
MN-ISH-R15-E www.insize.com ISH-R15 MANUAL ROCKWELL HARDNESS TESTER OPERATION MANUAL Attention Description This Instruction Manual shall be carefully read through in prior to use of the apparatus to clearly
More informationFASTENERS 701L, 701L-ASS 701L-C. Over Centre Fasteners 701 Series. Over Centre Fasteners 701 Series
1 2 Over Centre Fasteners 701 Series 701L, 701L-ASS 701L - Cold Rolled 701L-ASS - 316 Stainless 701L - Zinc Plated 701L-ASS - RAW 41g Padlockable Suits Strikers 30Z & 30-ASS Ø 4.3mm Over Centre Fasteners
More informationCONCRETE SAW PARTS LIST
CONCRETE SAW PARTS LIST MODEL CCXL-EE December 01 Part # 1 Intentionally Blank Table of Contents Description Page No. Frame Assembly... Carriage Assembly Motor Assembly.... Blade Shaft Assembly... Spring
More informationCAUTION INSTALLATION INSTRUCTIONS ! CAUTION. Heavy Duty Suspension Kits for Double Eye Springs. Safety Precautions: Inspection: Disassembly:
INSTALLATION INSTRUCTIONS Heavy Duty Suspension Kits for Double Eye Springs K71-358-00 for Single Axles K71-359-00 for Tandem Axles with 33" Axle Spacing K71-360-00 for Triple Axles K71-448-00 for Tandem
More informationROTARY HAMMER OWNER S MANUAL
ROTARY HAMMER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationOur service team is at your disposal for further information. Franke GmbH Obere Bahnstr Aalen Germany Tel.: /920-0 Fax.
Our service team is at your disposal for further information. Franke GmbH Obere Bahnstr. 64 73431 Aalen Germany Tel.: 07361 /9200 Fax.: 07361/920120 www.frankegmbh.com www.frankebearings.de www.frankelinearguides.de
More informationTuf-Lite III Fans 3000K Series Hub
Tuf-Lite III Fans 3000K Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationVIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
More informationICFS ROTARY DRILL ISB 6 VR
ICFS ROTARY DRILL ISB 6 VR Chuck clamp range Weight ISB 6 VR 550 w 230 V 0-3000 RPM 0.6-06 mm 1.3 Kg Commodity - Impact drill Quantity- 1 Content- 1 N each of Rotary drill, Chuck key, Drilling range: Drilling
More information1801 Ratchet Bender For 1-1/4", 1-1/2" Rigid Conduit, IMC and Schedule 40 Pipe
INSTRUCTION MANUAL 1801 Ratchet Bender For 1-1/4", 1-1/2" Rigid Conduit, IMC and Schedule 40 Pipe Serial Code RS Read and understand all of the instructions and safety information in this manual before
More informationDependable and tough, the Saddle Machine was specifically SADDLE MACHINES. Saddle Machines Include:
SADDLE MACHINES Just a brief note to say I am very pleased with my Mathey Short Saddle Machine... it is as old or older than I am and it has had new parts and pieces... but it still performs very well
More informationMast and Antennas for Field Day & Emergencies
Mast and Antennas for Field Day & Emergencies John A. Allocca, WB2LUA, July 2005 This is a 27 feet 1.5 diameter portable guyed mast with a 28 feet diameter footprint. It breaks down into four 6 feet sections
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationPrecision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
More informationPIPE EQUIPMENT SPECIALISTS LTD
PIPE EQUIPMENT SPECIALISTS LTD PIPE ALIGNMENT CLAMPS E-Z FIT RED Pipe welding clamp 1-12" o/d Quick and E-Z to use Ultra robust design, ideal for site work Stainless steel contact points as standard Sliding
More informationTuf-Lite II Fans 3000HC Series Hub
Tuf-Lite II Fans 3000HC Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 8 through 10 Diameter Hudson Tuf-Lite II (White) are made from fiberglass reinforced vinyl-ester
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationK K
Fasteners 501 K0043 Fasteners with spring clip 70 1 14 R1,5 7 3 4,3 11 17,5,5 Fastener K0043.1430701 Clamp K0043.9143111 45 4 4,3 Fasteners with spring clips for safe holding and locking of flaps, container
More informationSFP-550. Operating Manual MATSUHIDAI, MATSUDO-CITY, CHIBA JAPAN TEL: FAX:
SFP-550 Operating Manual 296-1 MATSUHIDAI, MATSUDO-CITY, CHIBA 270-2214 JAPAN TEL: +81-47-388-6111 FAX: +81-47-388-4477 Safety Precautions To ensure safe operation and maximize product service life, observe
More informationHOW TO MEASURE AND FIT REPLACEMENT TRUNNION ROLLERS
HOW TO MEASURE AND FIT REPLACEMENT TRUNNION ROLLERS When Customers order trunnion rollers for their Double Arm (DA) mixers they may not be aware that these rollers need to be custom fit to their mixer.
More informationHAND CRIMP TOOL SPECIFICATION SHEET Order No
HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-5200 TYPE 2C FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly
More informationParts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
More informationMEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C
MEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C Revised October 2007 Armtec reserves the right to alter designs. General The Armtec Sluice Gate is a quality and highly economical gate for a variety of
More informationTOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information
Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...
More informationLEACH S Traditional Hardened Steel Box. LEACH S Long Life Box. Titanium Box. Scaffold Spanners & Podgers SPANNER BOXES. Also in Bi-Hex 26 & 27
18 Scaffold & Podgers SPANNER BOXES LEACH S Traditional Hardened Steel Box LEACH S fastest selling box is famous in the scaffolding industry with thousands being used every day on site. The LEACH S Box
More informationSpecialist Tool Solutions PULLERS, SEPARATORS & TORQUE
Specialist Tool Solutions PULLERS, SEPARATORS & TORQUE PRODUCT CATALOGUE 07 INTRODUCTION Sykes-Pickavant Pullers have played a major part in the success of the Sykes-Pickavant brand for almost 50 years.
More informationIndustrial Grade Construction, Reliability & Performance
INDUSTRIAL Pulley BLOCKS Industrial Grade Construction, Reliability & Performance Ronstan s offer a high quality, reliable solution for a myriad of applications. Full stainless steel housings and attachment
More informationWhere plans come together.
Where plans come together. MORTISE LOCK Performance You Can Plan On. Taking a facility from architectural blueprint to completed project can be a complicated process. Decisions have to be made, deadlines
More informationPivots / Padlocks / Hasps
/ Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More information