Arlington Industries, Inc.

Transcription

1 LngfrdN 8/13/07 6:47 PM Page 1 800/ FX 570/ rlington Industries, Inc. Steel Pan Mounting oxes eiling pan boxes mount directly to a joist for a secure installation. Steel box. New! TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM NUME MFG # STYLE PKG PKG FS For 1/2" or 5/8" Drywall u. In. FS For 5/8" Drywall u. In. FS405T* For 1/2" or 5/8" Drywall u. In. FS407T* For 5/8" Drywall u. In. *Fan/fixture mounting bracket attaches to box through threaded openings using provided #10 screws. efer to chart on page N-15 for load ratings and number of single conductors. PTENTS PENDING. E48106 L49636 FS405 Each box includes... Installation screws, installed NM cable connector, mud cover, additional KOs, and two screws for bracket installation (screwed in place until removed by installer). Features and enefits enter screw is shipped-in-place ompetitively priced Protective plastic tips on the installation screws for added safety Plated steel finish ombination hex/phillips head screws for easy installation with power screwdrivers are parked...ready for easy bracket installation! UL rated: 70 lb. fan, 200 lb. fixture; S rated: 50 lb. FS Install FS405 on joist using shipped-in-place screw near center of box. emove parked-inplace screws to mount bracket Drill (2) 1/8" diameter holes into joist through the elongated openings on each side of box. emove the (2) long screws noted above to mount the bracket. FS405T Mount the bracket into the drilled holes. nd you re ready to install the fan or fixture. manufacturer s instructions and all N-1 Fan/Fixture oxes

2 LngfrdN 8/13/07 6:47 PM Page 2 rlington Industries, Inc. 800/ FX 570/ Steel, Octagonal Joist Mounting oxes eiling boxes mount directly to a joist for a supersecure installation. Two styles. Ships ready-to-install. FS415 TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM DIM NUME MFG # STYLE PKG PKG D FS /2" ox Depth/14.6 u. In Mounts Under Joist FS " ox Depth/20.0 u. In Mounts Under Joist FS415S /2" ox Depth/14.6 u. In Mounts on Side of Joist FS420S " ox Depth/20.0 u. In Mounts on Side of Joist efer to chart on page N-15 for load ratings and number of single conductors. PTENTS PENDING. E48106 L49636 D FS415 FS415S FS415S Features and enefits ombination hex/phillips head screws for easy installation with power screwdrivers. FS415/FS420 are UL rated: 70 lb. fan, 200 lb. fixture; S rated: 50 lb. FS415S/FS420S are UL rated: 70 lb. ; S rated: 50 lb. FS415/FS420 Mount UNDE Joist FS415S/FS420S Mount on SIDE of Joist Each box includes... Installed NM cable connector, mud cover, multiple KOs, four installation screws parked-in-place (ready for installer), and two screws for bracket installation (screwed in place until removed by installer). local applicable electrical codes, Fan/Fixture oxes N-2

3 LngfrdN 8/13/07 6:47 PM Page 3 800/ FX 570/ rlington Industries, Inc. Steel Fan & Fixture Mounting ox with djustable Mounting racket for New onstruction Heavy-duty, plated steel box with fully adjustable mounting bracket. djusts from 16" to 24" o.c. spacing. TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM NUME MFG # STYLE PKG PKG FS For up to 1-1/4" ceiling thickness 15.6 u. In. For OX dimensions, For Joist or afters 16" to 24" on center refer to FS415 on page N-2. efer to chart on page N-15 for load ratings and number of single conductors. PTENT PENDING. E48106 L49636 Features and enefits No loose parts to misplace Heavy-duty plated steel construction eliminates fan wobble Versatile 16" to 24" on-center positioning racket preset for 1/2" ceiling thicknesses Works on ceilings up to 1-1/4" thick fully adjustable! For ceiling material greater than 5/8", convenient indicator marks allow you to bend the bracket at the scoreline matching your ceiling depth for a flush ceiling installation. Locator tabs included for installation ease are parked...ready for easy bracket installation! UL rated: 70 lb. at 24" o.c. and 110 lb. at 16" o.c.; S rated: 50 lb. for 1/2" eilings 1. Nail tooth to joist to temporarily hold bracket in place. 2. emove parked screws provided on each side of bracket and use them to attach bracket to joists. 3. Use provided box screw to adjust box position from 16" to 24" on-center between joists. 4. Use provided parked installation screws to install mounting bracket. (Installation of drywall not shown.) Mounts easily and securely between joists...adjusts from 16" to 24" o.c. For a video demonstration go to... aifittings.com/rlington_fs415_white.html 1 2 FS415 includes... ox/bracket, screws to adjust box position, installed NM cable connector & mud cover, multiple KOs, four installation screws parked-in-place (ready for installer), and two screws for bracket installation (screwed in place until removed by installer). 3 end bracket along the scorelines for 3/4", 1", or 1-1/4" ceiling depths! 4 N-3 Fan/Fixture oxes

4 LngfrdN 8/13/07 6:47 PM Page 4 rlington Industries, Inc. 800/ FX 570/ Steel Fan & Fixture ox with djustable Mounting racket for Existing onstruction Heavy-duty, plated steel box with fully adjustable mounting bracket for retrofit installations. djusts from 16" to 24" o.c. spacing. TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG FS " ox Depth u. In. For OX dimensions, refer to FS420 on page N-2. efer to chart on page N-15 for load ratings and number of single conductors. PTENT PENDING. E48106 L49636 For Joist or afters 16" to 24" on center FS420 includes... ox/bracket, screws to adjust box position, installed NM cable connector, multiple KOs, and two screws for bracket installation (screwed in place until removed by installer). Features and enefits No parts to lose installation and adjustment screws ship parked in place Installs quickly and securely between joists or rafters 16" to 24" o.c. are parked...ready for easy bracket installation! UL rated: 35 lb. fan, 50 lb. fixture; S rated: 50 lb ut a 4-1/16" diameter hole in ceiling. emove box from sled and fit mounting bracket into hole. Position bracket between joists, with bracket resting on the ceiling. 2. Tighten the hex bar with a wrench to secure bracket between joists. s the hex bar is tightened, bracket ends bite into the joists, holding the unit secure. 3. Pull cable through installed NM cable connector. eattach box, and center it in hole. ttach bracket with supplied screws. Fan/Fixture oxes N-4

5 LngfrdN 8/13/07 6:47 PM Page 5 800/ FX 570/ rlington Industries, Inc. Steel Fan & Fixture ox Kits for Suspended eilings Plated steel box with adjustable mounting bar. For mounting a fan or fixture on a suspended ceiling grid. FS420SL for fixtures only. New! TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG FS420S* For Suspended eilings Varies 2" ox Depth / 20.0 u. In. FS420SL For Suspended eilings " ox Depth / 20.0 u. In. *Listed for use in environmental air handling spaces per 2005 NE code requirements (c). For OX dimensions, refer to FS420 on page N-2. efer to chart on page N-15 for load ratings and number of single conductors. PTENT PENDING. FS420S E48106 L49636 FS420SL FS420S includes... ox/bracket assembly with turnbuckle, screws to adjust box position, installed NM cable connector, multiple KOs, 12' heavy-duty chain, two S hooks, and two screws for bracket installation (screwed in place until removed by installer). Features and enefits Installs quickly and securely saves 30 minutes of installation time Ships fully assembled omes preset for a 24" grid, but mounting bracket adjusts up to 1/2" per side No parts to lose installation and adjustment screws ship parked in place FS420S features trimmable, plastic, mounting clips to lower box position for ceiling tiles that extend below the grid FS420S has parked installation screws ready for easy bracket installation! FS420S is UL rated: 35 lb. fan, 50 lb. fixture; S rated: 50 lb. FS420SL is UL and S rated: 25 lb. fixture FS420S 1. ut a 4-1/16" diameter hole in the center of a 24" ceiling tile. Place box over hole. Snap plastic ends of support bar over the ceiling grid. 1 2 NOTE: HIN MUST E ENTEED OVE OX. 2. Use the S hooks provided to attach chain to turnbuckle, and chain to the overhead support. Use turnbuckle to apply tension to the chain, so it supports the weight of fan. FS420S Installation Options To Mount ox Off-enter: Loosen screws and slide box into position Pull cable through installed NM cable connector and remove captive screws for bracket installation. For eiling Tiles that Extend elow the Grid: ut 1/4" off the plastic ends of each leg of the support bar. N-5 Fan/Fixture oxes

6 LngfrdN 8/13/07 6:47 PM Page 6 rlington Industries, Inc. 800/ FX 570/ Steel Fan & Fixture Pan ox with djustable Mounting racket for Wood I-Joists in Existing onstruction Heavy-duty, plated steel box with fully adjustable mounting bracket. For retrofit installations on wood I-beams or rafters set 16 to 24 inches on-center. New! TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG FS For 1/2" or 5/8" Drywall u. In. For OX dimensions, refer to FS407T on page N-1. efer to chart on page N-15 for load ratings and number of single conductors. PTENT PENDING. E48106 L49636 For Joist or afters 16" to 24" on center FS407 includes... ox/bracket, screws to adjust box position, installed NM cable connector, multiple KOs, and two screws for bracket installation (screwed in place until removed by installer). Features and enefits No parts to lose installation and adjustment screws ship parked in place Installs quickly and securely on wood I-beams Position the box anywhere along the bracket to center the in the room are parked...ready for easy bracket installation! UL rated: 35 lb. fan, 50 lb. fixture; S rated: 50 lb. 1. ut a 4-3/8" diameter hole in ceiling. emove pan box from sled and fit mounting bracket into hole, positioning between wood I-joists with feet resting on ceiling Loosen sled screws and slide over to access hex bar. (Note: no need to remove sled.) 3. Tighten hex bar with a wrench to embed points and secure between I-joists. 4. Tighten sled to hex in center of hole. Pull cable through NM cable connector and remount box. ttach fan/ fixture bracket with supplied screws. ut away showing FS407 installed between wood I-beams Fan/Fixture oxes N-6

7 LngfrdN 8/13/07 6:47 PM Page 7 800/ FX 570/ rlington Industries, Inc. Nail On Fan & Fixture oxes with Steel Mounting racket Plastic box with steel mounting bracket for fast and easy nail on installation to a single or double joist. TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG F417S For up to 1-1/2" ceiling thickness (Including drywall on furring strips or hat channel) 20.0 u. In. F417SLP For 1/2" to 5/8" ceiling thicknesses only 20.0 u. In. efer to chart on page N-15 for load ratings and number of single conductors. PTENT PENDING. E L49636 F417S F417SLP F417S Each box includes... Plastic box with steel mounting bracket, installed NM cable connector, mud cover, second KO, two parked-in-place bracket nails, and two bracket installation screws (screwed in place until removed by installer). Features and enefits F417S features convenient indicator marks for 1/2", 5/8", and 3/4" ceiling thicknesses Works well on single or double wood joists are parked...ready for easy bracket installation! F417SLP also works with wood and manufactured I-beams 2-hour fire rating UL rated: 70 lb. ; S rated: 50 lb. Nails to SINGLE JOIST F417SLP - Low Profile Saves Time! Nails to the Joist for a Super Secure Installation! ll photos shown with F417S DOULE JOIST anadian orders ship with grounding lug required by S for use with fixtures. N-7 Fan/Fixture oxes

8 LngfrdN 8/13/07 6:47 PM Page 8 rlington Industries, Inc. 800/ FX 570/ Mounting oxes eiling pan boxes. Features and enefits are parked...ready for easy bracket installation! Works well on double joists or wood I-beams ombination hex/phillips head screws for easy installation with power screwdrivers 2-hour fire rating UL rated: 70 lb. fan, 200 lb. fixture; S rated: 50 lb. TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG F For 1/2" or 5/8" Drywall u. In. F4050* For 1/2" or 5/8" Drywall u. In. F For 5/8" Drywall u. In. F4070* For 5/8" Drywall u. In. *ulk packing for lower cost. efer to chart on page N-15 for load ratings and number of single conductors. PTENTED. DDITIONL PTENTS PENDING. anadian orders ship with grounding lug required by S for use with fixtures. E L49636 Each box includes... ready-to-tighten center screw, installed NM cable connector, mud cover, second KO, and two screws for bracket installation (screwed in place until removed by installer). (not included) in accordance with manufacturer s instructions and all local applicable electrical codes, using the parked screws provided. Mounting oxes oxes accommodate 1/2" or 5/8" drywall with 3/4" furring strips or hat channel. F412 F423 TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG F Pan ox u. In. F Press-On ox u. In. efer to chart on page N-15 for load ratings and number of single conductors. PTENTED. DDITIONL PTENTS PENDING. E L49636 Each box includes... ready-to-tighten center screw, installed NM cable connector, mud cover, second KO, and two screws for bracket installation (screwed in place until removed by installer). F412 anadian orders ship with grounding lug required by S for use with fixtures. F412 F423 Features and enefits For use with 1/2" or 5/8" drywall with 3/4" furring strips or hat channel lso for double 5/8" drywall ttaches securely to joist through shipped-in-place center screw 2-hour fire rating UL rated: 70 lb. fan; 200 lb. fixture; S rated: 50 lb. Fan/Fixture oxes N-8

9 LngfrdN 8/13/07 6:48 PM Page 9 800/ FX 570/ rlington Industries, Inc. Press-On Mounting oxes The fastest, easiest way to mount fans and fixtures. Ships ready-to-install! F415 New! TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG F For 1/2" or 5/8" Drywall u. In. F4150* For 1/2" or 5/8" Drywall u. In. F For 1/2" or 5/8" Drywall u. In. F426F For 1/2" or 5/8" Drywall u. In. *ulk packing for lower cost. efer to chart on page N-15 for load ratings and number of single conductors. PTENTED. DDITIONL PTENTS PENDING. F426F Features and enefits Gripping tangs press-hold to the joist while you reach for your screwdriver omes with NM connector installed and mud cover in place are parked...ready for easy bracket installation! F426F s flanged design forms a protective barrier against air infiltration 2-hour fire rating UL rated: 70 lb. fan, 200 lb. fixture; S rated: 50 lb. anadian orders ship with grounding lug required by S for use with fixtures. E L49636 Each box includes... Press-on box with ready-to-tighten center screw, installed NM cable connector, mud cover, second KO, and two screws for bracket installation (screwed in place until removed by installer). F426F also includes (1) roll of caulk. F Press box onto joist. Gripping tangs hold the box in place temporarily. 2. Tighten center screw to secure to joist. 3. Push NM cable through connector. 4. emove two long, parked screws for installation of bracket. 5. Use the screws to install bracket through the oval slots in the box, directly into the joist. N-9 Fan/Fixture oxes

10 LngfrdN 8/13/07 6:48 PM Page 10 rlington Industries, Inc. 800/ FX 570/ Mounting ox Our deepest L-shaped box mounts securely to single or double joists with a shipped-in-place center screw. TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG F For 1/2" or 5/8" Drywall u. In. efer to chart on page N-15 for load ratings and number of single conductors. PTENT PENDING. Locator posts for positioning of bracket installation screws E L49636 F444 includes... ready-to-tighten center screw, installed NM cable connector, mud cover, multiple KOs, and two screws for bracket installation (screwed in place until removed by installer). Features and enefits rlington s deepest fan box! Easy wire access Locator posts assure proper positioning of bracket are parked...ready for easy bracket installation! 2-hour fire rating UL rated: 70 lb. fan, 200 lb. fixture; S rated: 50 lb. 1. Position box alongside joist. Tighten center screw, mounting box to joist Position mounting bracket over locator posts to assure proper position. 3. emove captive bracket installation screws. Use them to mount bracket. OPT 4 anadian orders ship with grounding lug required by S for use with fixtures. Optional If necessary, the bottom of the box can be opened to access wires. 4. Pull wires through knockout. (Installation of drywall not shown.) Fan/Fixture oxes N-10

11 LngfrdN 8/13/07 6:48 PM Page / FX 570/ rlington Industries, Inc. Mounting oxes Our lowest cost L-shaped boxes mount securely to single or double joists with a shipped-in-place center screw. Locator posts for positioning of bracket installation screws TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM DIM NUME MFG # STYLE PKG PKG D F For 1/2" or 5/8" Drywall u. In. F For 1/2" or 5/8" Drywall u. In. efer to chart on page N-15 for load ratings and number of single conductors. PTENT PENDING. E L49636 Each box includes... ready-to-tighten center screw, installed NM cable connector, mud cover, multiple KOs, and two screws for bracket installation (screwed in place until removed by installer). D Features and enefits Locator posts assure proper positioning of bracket ompetitively priced are parked...ready for easy bracket installation! 2-hour fire rating UL rated: 70 lb. fan, 200 lb. fixture; S rated: 50 lb. anadian orders ship with grounding lug required by S for use with fixtures. 1. Position box alongside joist. Tighten center screw, mounting box to joist Position mounting bracket over locator posts to assure proper position. Pull wires through KO. (not included) in accordance with local applicable electrical codes, 3. emove captive bracket installation screws. Use them to mount bracket. (Installation of drywall not shown.) N-11 Fan/Fixture oxes

12 LngfrdN 8/13/07 6:48 PM Page 12 rlington Industries, Inc. 800/ FX 570/ Mounting oxes for New onstruction Mounts fans and fixtures on sloped or cathedral ceilings. New! TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM DIM NUME MFG # STYLE PKG PKG D F Fits Sloped eilings up to u. In. F Fits athedral eilings , Plus u. In. efer to chart on page N-15 for load ratings and number of single conductors. D PTENTED. DDITIONL PTENTS F450 F900 PENDING. F450 F450 E L49636 THE SIMPLE WY TO GET FINISH! D Each box includes... Mounting block with built-in electrical box, installed NM94 cable connector, two installation screws ready to tighten, and two parked-in-place bracket installation screws (ready for installer). F900 F900 Features and enefits Large, 8" square mounting surface handles newer fans with larger canopies Installs quickly and securely F900 has taller sides to fit cathedral ceilings with angles greater than 80 Paintable, textured finish are parked...ready for easy bracket installation! UL rated: 70 lb. fan, 200 lb. fixture; S rated: 50 lb. anadian orders ship with grounding lug required by S for use with fixtures. F450 Trim a 2x8, approximately 18" long. llow the panel to extend 9-11" past the F450. Install the F450 on the 2x8 using the (2) #8 x 1-1/2" long parked screws provided. Score and trim the F450 as necessary, keeping bottom of box level. (Short side needs to touch rafter.) Trim wood as necessary to butt it to rafter. Nail or screw assembly to rafter. Push the cable through the installed cable connector in the electrical box. F900 ut a 2x4 approximately 14" long to span the pitched rafters. Install the F900 in the center of the cut 2x4 using the (2) #8 x 1-1/2" long parked screws provided. Position the 2x4 with the F900 attached to the angled rafters, keeping bottom of box level, and the short sides of the box touching the angled rafters. Nail or screw the assembly, spanning both angled rafters. Push the cable through the installed cable connector in the electrical box. Fan/Fixture oxes N-12

13 LngfrdN 8/13/07 6:48 PM Page / FX 570/ rlington Industries, Inc. Mounting ox with djustable rackets for New onstruction Mounts fans and fixtures on cathedral ceilings between two framing members for perfect centering within room. New! TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM NUME MFG # STYLE PKG PKG FX djustable. Fits athedral eilings 80, plus 14.5 u. In. For OX information, refer to F900 on page N-12. efer to chart on page N-15 for load ratings and number of single conductors. PTENTED. DDITIONL PTENTS PENDING. djustable from 1'-2" to 2'-0" E L49636 Features and enefits Expandable brackets hold box securely between joists no need to cut and nail 2x4s to center the fan or fixture llows fans/fixtures to be perfectly centered within room Large, 8" square mounting surface handles newer fans with larger canopies Installs quickly and securely Includes a template to level and position brackets between rafters Taller sides fit cathedral ceilings with angles greater than 80 Paintable, textured finish are parked...ready for easy bracket installation! UL rated: 70 lb. ; S rated: 50 lb. anadian orders ship with grounding lug required by S for use with fixtures. FX900 includes... Expandable brackets with mounting screws, screws to adjust box position, mounting block with built-in electrical box, installed NM94 cable connector, and two parked-in-place bracket installation screws (ready for installer). emove and use these screws to attach bracket ends to rafters Loosen these screws to expand brackets and position box between rafters 2 Tooth holds brackets temporarily in place on rafter Loosen the screws noted above. Slide box to center it between rafters. Tighten screws. Install wires. 1 3 For proper installation, use supplied template to level and position brackets between rafters. emove captive screws on sides of brackets and use to attach FX900 assembly to rafters. ut and position drywall to fit around the box. (Note: captive screws in box.) Install fan or fixture per manufacturer s instructions using captive installation screws. N-13 Fan/Fixture oxes

14 LngfrdN 8/13/07 6:48 PM Page 14 rlington Industries, Inc. 800/ FX 570/ '' Mounting lock With built-in box for fan and fixture installations. TLOG UP/DI/NED DESIPTION/ UNIT STD DIM DIM DIM NUME MFG # STYLE PKG PKG M Flat Mount u. In. efer to chart on page N-15 for load ratings and number of single conductors. PTENTED. E L49636 M8 includes... Two #10 x 3" wood screws, one #8 x 1-1/2" wood screw, two KOs, and one NM94 non-metallic cable connector. Features and enefits eiling medallion and electrical box combined Supports flood lights, smoke detectors, fans, light fixtures any fixture needing a safe, strong installation. UV rated plastic For interior or exterior use Mounts directly to soffit or ceiling joist without the need to cut ceiling drywall Paintable UL rated: 70 lb. fan, 200 lb. fixture; S rated: 50 lb. anadian orders ship with grounding lug required by S for use with fixtures. Joist or Stud 1. Locate the ceiling joist using a stud finder or similar device. Drill a hole approximately 1/2" in diameter, in the ceiling next to the joist. emove desired knockout. Insert the cable connector into the opening. Pull the NM cable through the connector. 2. Using the #8 x 1-1/2" wood screws provided, mount the M8 to the joist (through the ceiling). 3. Install the fixture or fan mounting bar (provided with the fixture or fan) directly to the joist with the (2) #10 x 3" wood screws and lock washers provided. Wire the fixture or fan following the instructions included with the product. manufacturer s instructions and all Fan/Fixture oxes N-14

15 LngfrdN 8/13/07 6:48 PM Page / FX 570/ rlington Industries, Inc. Fan/Fixture ox ating and # of Single onductors UL S UL FIXTUE S FIXTUE TLOG NUME UI INHES FN LOD TING FN LOD TING STTI TING STTI TING # OF SINGLE ONDUTOS #14 or #12 or #10 (LS.) (LS.) (LS.) (LS.) F F F F F F F F417S F417SLP F F F426F F F F F F FS FS " o.c " o.c " o.c. 16" o.c. FS FS420S FS FS405T FS FS407T FS FS415S FS FS420S FX FS420SL M N-15 Fan/Fixture oxes