Arlington Industries, Inc.

Transcription

1 rlington Industries, Inc / FX 570/ Steel Stand-Off racket 20 gauge steel stand-off bracket provides rigid support and spacing for a 4x4 metal box installed with all types of raceway systems. omplies with 2008 NE Overcomes code violations. Provides box support independent of conduit. TLOG UP/DI/NED DESRIPTION UNIT STD DIM DIM DIM NUMER MFG # PKG PKG Gauge Steel PTENT PENDING overcomes violations of 2008 NE () and ( and ) Features and enefits racket has oversized clearance holes that assure proper bonding between the fitting and the box Easy-to-install and provides secure fastening and rigid box support Mounts to metal, wood, block, or brick with a variety of fasteners Pre-drilled holes line up with holes in 4x4 metal box For use with all types of raceway systems 44 overcomes violations of 2008 NE () and ( and ) Installation Instructions 1 Place 44 on metal stud and mark EMT. 4 2 EMT marked and ready to cut. 5 For a video installation demonstration visit our aifittings.com 3 ttach 44 stand-off bracket to metal stud through holes in base. 6 EMT floats in clearance hole to assure proper bonding between box and fitting. Install locknut on EMT fitting. ttach 4x4 metal box to the stand-off bracket with screws (not provided) through pre-drilled holes in bracket. ompleted installation. The box is supported by the 44 stand-off bracket, not the conduit! M-1 This document provided by arr-thorp Electric o., Inc

2 / FX 570/ rlington Industries, Inc. ox Extenders Levels and supports the wiring device where the box is set back from the wall surface. Extends the box up to 1-1/2". TLOG UP/DI/NED UNIT STD DIM DIM DIM NUMER MFG # PKG PKG E E1G E E E E1G includes two #6 x 2" long screws. PTENTED. DDITIONL PTENTS PENDING. E1 E LR49636 Two Hour Fire Rating E2 Features and enefits llows the contractor to comply with 2008 NE rticle Levels and supports the wiring device where the box is set back from the wall surface (adjusts up to a 1-1/2" box extension) Works in handy boxes and 4" square electrical boxes with plaster rings for single switches or receptacle Functions with all standard devices, switches, and GFIs Manufactured from 105 continuous use 94V0 rated flame retardant plastic for safer installations E1 E2 E4 E3 HEVY-DUTY PLSTI, UL LISTED! E1 Installation Instructions Problem... Electrical box set back from wall surface. SOLUTION To install without removing device wires, tilt the device through the E1 at a slight angle, straighten it and tighten the screws! Pull wires through, then press the E1 firmly into the electrical box. ttach wires to receptacle. Then tighten screws for a level, fully supported, code compliant installation. M-2 This document provided by arr-thorp Electric o., Inc

3 rlington Industries, Inc / FX 570/ Slip Meter Riser Fitting Designed to create an expansion joint in the installation of an electrical service entrance. TLOG UP/DI/NED DESRIPTION/ UNIT STD DIM DIM DIM NUMER MFG # STYLE PKG PKG NM K.O. size PTENT PENDING. E LR49636 Features and enefits Fast, easy underground service installations Protects cable from freeze/thaw flexion and ground movement Meets 2008 NE 300.7() and 300.5(J) Installation Instructions Glue NM2520 onto 2-1/2 PV conduit. Slip 2-1/2 conduit over 2 non-metallic conduit coming from the ground (PV conduit not supplied). ttach the NM2520 to the bottom of the meter enclosure. 2 to 2-1/2 meter riser fitting holds conduit firmly in place (locknut is not suplied). Fixture Hanger For hanging static load items requiring drop wire support. TLOG UP/DI/NED DESRIPTION/ UNIT STD DIM DIM DIM NUMER MFG # STYLE PKG PKG FH Fixture Hanger for hanging fixtures, etc up to 50 lbs PTENT PENDING. Features and enefits Supports up to 50 lbs Low profile base No tools needed Snaps into knockout M-3 This document provided by arr-thorp Electric o., Inc

4 / FX 570/ rlington Industries, Inc. Non-Metallic ox Extender Install over a shallow box and allows you to install larger devices: dds 5/8 TLOG UP/DI/NED DESRIPTION/ UNIT STD DIM DIM DIM DIM DIM NUMER MFG # STYLE PKG PKG D E ES Single Gang / White Each unit pack includes two installation screws PTENT PENDING. ES1 E LR49636 Features and enefits dds 5.3 cubic inches to existing box volume No need to remove existing shallow box llows you to install larger devices such as GFI s in shallow boxes Finishes with any standard or mid-size wall plate Paintable E D Non-Metallic ox Extender Install over a shallow box and allows you to install larger devices: dds 5/8 TLOG UP/DI/NED DESRIPTION/ UNIT STD DIM DIM DIM NUMER MFG # STYLE PKG PKG ES White End onnector ES White oupler onnector Each unit pack includes four installation screws PTENT PENDING. ES2 E LR49636 Features and enefits ES2 adds 10.5 cubic inches to existing box volume ES2 pair adds an additional gang and 3.5 cubic inches No need to remove existing shallow box llows you to install larger devices such as GFI s in shallow boxes Finishes with any standard or mid-size wall plate Paintable ES2 This document provided by arr-thorp Electric o., Inc M-4

5 rlington Industries, Inc / FX 570/ Wire Grabber Kit When hanging fixture boxes, fixtures, cable tray and other static load items requiring drop wire support. TLOG UP/DI/NED DESRIPTION/ UNIT STD DIM DIM DIM NUMER MFG # STYLE PKG PKG DW Fixture Support for fixtures, etc up to 50 lbs PTENT PENDING. E Features and enefits Includes 12 ft of drop wire and two Wire Grabber osts less than other similar products 50 lb weight rating Tighten Wire Grabber with Philips screwdriver Faster installation for Industrial and ommercial applications (Electrical) fixtures, cable tray and bus bar (HV), rectanglular, oval or spiral ducting. Drive Rings Made of corrosion-resistant galvanized steel, this series of drive rings provides sturdy support for wire and cable. DR4 DR3 DR2 DR1 TLOG UP/DI/NED DESRIPTION/ UNIT STD DIM DIM NUMER MFG # STYLE PKG PKG DR /2" DRIVE RING /2 1-1/4 DR /8" DRIVE RING /8 1-3/8 DR /8" DRIVE RING /8 1-3/8 DR /4" DRIVE RING /4 1-7/8 PTENT PENDING. Features and enefits an be used on outside walls, inside walls, wood studs and utility poles Quick and easy to install, fastens to surface by using a hammer Loop is open making it easy to insert or remove cable. Size is measurement between loops. M-5 This document provided by arr-thorp Electric o., Inc

6 / FX 570/ rlington Industries, Inc. eiling ox Extender For set back ceiling boxes. Fits 3-1/2" and 4" round or octagonal boxes. TLOG UP/DI/NED UNIT STD DIM DIM DIM NUMER MFG # PKG PKG E1R PTENTED. E LR49636 Features and enefits omplies with 2008 NE rticle Extends box up to 1-1/2" to bring it level with ceiling surface Trims to accommodate shallow boxes or to avoid obstructions Manufactured from 105 continuous use 94V0 rated flame retardant plastic for safer installations HEVY-DUTY PLSTI, UL LISTED! Installation Instructions Problem... SOLUTION eiling box is set back from surface. Non-conductive E1R ox Extender installs easily and extends box flush with ceiling surface. Proceed with fixture installation. Flexible, plastic E1R protects against wire damage. FIXTURE R FIRMLY SUPPORTED for ESIER NOPY INSTLLTION! Fixture is installed and a level, code compliant installation is complete! ox overs overs 4" round or octagonal boxes. Non-metallic. Will not rust. TLOG UP/DI/NED OX UNIT STD DIM DIM DIM NUMER MFG # SIZE PKG PKG P " Features and enefits Paintable to blend with any wall or ceiling omes complete with white painted screws to blend with cover Reusable and flexible Will not rust or discolor This document provided by arr-thorp Electric o., Inc M-6

7 rlington Industries, Inc / FX 570/ eiling ox over overs unused 3-1/2" and 4" round and octagonal boxes prior to the installation of a fan or fixture. Non-rusting, paintable plastic. TLOG UP/DI/NED OX UNIT STD DIM DIM DIM NUMER MFG # SIZE PKG PKG P /2 & 4" 1/ag 50 ags Two #8-32 x 3/4" flat head screws and bracket are included. PTENTED. E LR49636 Improved Features Deeper cover works with pan boxes without the need to cut the post Use #8 screws provided or back out existing screws to accept notched bracket racket has two separate cover mounting options. Threaded post pushes in, for flat ceilings, or screws on for textured/uneven ceilings. enefits ttractive cover. Screws don t show on the ceiling Plastic eliminates the scratches you get with painted metal covers overs poorly cut drywall RKET For Flat and Uneven eilings... Screw threaded post into Opening for uneven or textured ceilings Push into Opening for flat ceilings Mounting screws are invisible on the ceiling Threaded Post OVERS PN OXES! Installation Instructions 1 2 For box attachment without removing screws For box attachment using screws provided ack the screws out enough to slip the bracket on. Use the opening in the bracket most suitable for your ceiling condition... for flat ceilings, push post into opening to seat cover; for uneven or textured ceilings, screw threaded post into opening until tight. M-7 This document provided by arr-thorp Electric o., Inc

8 / FX 570/ rlington Industries, Inc. Non-Metallic ushings for Metal Studs TLOG UP/DI/NED STUD STD DIM DIM DIM DIM NUMER MFG # SIZE PKG D S x S x These bushings fit existing irregular shaped holes in metal studs, alleviating the need to punch holes in metal studs, weakening the structural member. Use these bushings to comply with paragraph 300-4(b)(1) of the 2008 NE code which states that: In both exposed and concealed locations where nonmetallic-sheathed cables pass through either factory or field punched, cut, or drilled slots or holes in metal members, the cable shall be protected by bushings or grommets covering all metal edges and securely fastened in the opening prior to installation of the cable. PTENTED. WSHER USHING E LR49636 D FITS STNDRD 1" KNOKOUT Installation Instructions To install these bushings in an irregular shaped hole, pass one end of the joined connector through the hole in the stud. Snap the bushing and the washer ends together. There s no need to separate the two halves. If a punched hole is required, the S13 can be installed in a standard 1" trade size, round punched hole (1-3/8" diameter). Snap the bushing end into the hole ODE VIOLTION SHRP EDGE NM LE ommon hole configurations in metal studs. Non-Metallic ushings for Metal Studs TLOG UP/DI/NED TRDE STD DIM DIM DIM NUMER MFG # SIZE PKG S / S / S S Note: See page M-9 for larger sizes. S3 E LR49636 This document provided by arr-thorp Electric o., Inc M-8

9 rlington Industries, Inc / FX 570/ Snap-In ushings For knockouts. ll-plastic, snap-in type. TLOG UP/DI/NED TRDE UNIT STD DIM DIM DIM NUMER MFG # SIZE PKG PKG / / / / / E LR49636 Snap-In lanks ll plastic. For knockouts. Grey color. TLOG UP/DI/NED TRDE UNIT STD DIM DIM NUMER MFG # SIZE PKG PKG NM900* / NM / NM NM / NM / NM *UL and S listed. UL recognized. E LR49636 E15331 These items cost less than steel snap-in blanks, and provide a safer installation. metal blank in a plastic box or enclosure is not grounded and could become a shock hazard. Snap-In lanks Plated steel. For knockouts. TLOG UP/DI/NED TRDE UNIT STD DIM DIM NUMER MFG # SIZE PKG PKG / / / / M-9 This document provided by arr-thorp Electric o., Inc

10 / FX 570/ rlington Industries, Inc. eam lamps Plated steel. TLOG UP/DI/NED STTI LOD TRDE UNIT STD DIM THREDED NUMER MFG # RTING SIZE PKG PKG ROD SIZE LS / LS /8-16 eam lamps Malleable iron. Plated. TLOG UP/DI/NED STTI LOD TRDE UNIT STD DIM THREDED NUMER MFG # RTING SIZE PKG PKG ROD SIZE M LS /4-20 M LS M LS. 1-1/ /16-18 M LS /8-16 M LS. 2-1/ /2-13 Safety Plate Flat 16 gauge steel. TLOG UP/DI/NED TRDE UNIT STD DIM DIM DIM DIM NUMER MFG # SIZE PKG PKG D SP /2 x 2-3/ D Jack hain Zinc-plated steel. 100 feet per steel reel. Maximum load limit 25 lbs. TLOG UP/DI/NED UNIT STD NUMER MFG # SIZE TN TN J /2 100 ft 100 ft This document provided by arr-thorp Electric o., Inc M-10

11 rlington Industries, Inc / FX 570/ oncrete Pipe Sleeves Provides an economical method of sleeving through concrete pour allowing cable or conduit to easily run from one floor to the next. olor - black. TLOG UP/DI/NED DESRIPTION FITS STD DIM DIM DIM NUMER MFG # PKG PS For 1-1/2" hole 1" pipe PS For 2" hole 1-1/2" pipe PS For 3" hole 2" pipe PS For 4" hole 3" pipe PS For 5" hole 4" pipe PS For 6" hole 5" pipe Features and enefits Stackable for extra deep pours Venting prevents sleeves from sticking together when wet Plastic djustable Throat Liners To be installed in fittings after conduit, fitting and wire are in place. llows installation to meet local electrical code. Non-metallic. TLOG UP/DI/NED TRDE UNIT STD DIM DIM NUMER MFG # SIZE PKG PKG / / / / E26807 Duct Seal ompound sbestos-free, non-drying, nontoxic, permanently soft. TLOG UP/DI/NED TRDE UNIT STD NUMER MFG # SIZE PKG PKG DS L 1 50 DS L 1 10 R15221 Features and enefits dheres to most clean, dry surfaces Will not adversely affect plastic materials or corrode metals M-11 This document provided by arr-thorp Electric o., Inc

12 / FX 570/ rlington Industries, Inc. Switch ox Supports Galvanized steel. TLOG UP/DI/NED UNIT STD DIM DIM MTERIL NUMER MFG # PKG PKG DIM SS UL/S NOT PPLILE S-Hooks Plated steel. Maximum load limit 25 lbs. TLOG UP/DI/NED UNIT STD DIM DIM DIM NUMER MFG # SIZE PKG PKG SH / SH / ox-to-ox Locknut and SNP-TITE onnectors Zinc die-cast. TLOG UP/DI/NED TRDE UNIT STD DIM DIM DIM DIM NUMER MFG # SIZE PKG PKG D / ST / PTENTED. D SNP-TITE products have been tested and listed by UL in accordance with UL s ground fault requirements. For additional information see page ST E60812 LR49636 This document provided by arr-thorp Electric o., Inc M-12