MODEL N COPY OWNER S MANUAL. Keep this Product ID Number and use when contacting Customer Service:

Size: px

Start display at page:

Download "MODEL N COPY OWNER S MANUAL. Keep this Product ID Number and use when contacting Customer Service:"

Madeline Ball
6 years ago
Views:

1 MODEL N OWNER S MANUAL COPY Keep this Product ID Number and use when contacting Customer Service: 1

2 REGISTER YOUR LIFETIME PRODUCT TODAY! There are benefi ts to registering your Lifetime product. With our new online product registration form, it s fast and easy! Register with us at and enjoy these great benefi ts: as NEW product notifications and special closeout promotions! receipt to verify your product purchase date before warranty service will be provided. Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your personal data to other third parties, or allow them to use your personal data for their own purposes. We invite you to read our privacy policy at REGISTER today! Save this owner s manual for future reference and in the event that the manufacturer has to be contacted. **U.S. and Canada customers ONLY** IF ASSISTANCE IS NEEDED, DO NOT CONTACT THE STORE! CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time) COPY **Call us or visit our Web site for Saturday hours** Lifetime Products, Inc. **For customers outside the U.S. or Canada, please contact the store for assistance.** INSTRUCTION # F 2 12/15/2011

3 SAFETY INSTRUCTIONS DAMAGE AND WILL VOID WARRANTY. To ensure safety, do not attempt to assemble this product without reading and materials for parts and/or additional instruction material. identify and inventory all parts and hardware using the parts and hardware lists and identifi ers in this document. Proper and complete assembly, use and supervision and/or operated properly. Failure to comply with any of the warnings in this result in property damage. Please heed all warnings and cautions. sections to separate during play or transport. Most injuries are caused by misuse and/or not following instructions. Use caution when using this product. BEFORE BEGINNING ASSEMBLY Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service Department. Identify and inventory all parts and hardware using the parts and hardware lists and identifi ers in this document. buildup from inside the holes. Do not scrape away all of the 3

4 TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY 1/2 Wrench 7/16 Wrench 9/16 Wrench (2) (2) (2) Pliers 3/16 Allen Wrench (2) Phillips Screwdriver (1) Rubber Mallet (2, included) Scrap Wood (1) (1) Sand (1) Water Hose (1) (362 lb) (1) *Two adults required to complete assembly* Only adults should set up the product. Do not allow children in the setup area until assembly is complete.

5 ASSEMBLY GUIDES Refer to the following areas throughout the instructions to assist in the assembly process: This area is located at the top, left-hand corner of the page and indicates which tools and hardware are needed to complete the assembly steps on a page. TOOLS AND HARDWARE REQUIRED FOR THIS PAGE This area is usually located in the bottom, left-hand corner of a step and indicates that special attention is needed to perform a particular part of a step.! Note: These areas are usually located in the bottom, right-hand corner of a step and indicate that damage to the product or serious injury may occur if the caution or warning is not heeded. CAUTION WARNING 5

6 PARTS LIST ID Item Description Qty Top Pole 1 Middle Pole 1 1 AJK 1 AJJ 1 AJI 1 Rim 1 AKZ Net 1 Counterbalance Spring 1 AKC 2 2 Outer Tube 1 AKQ Inner Channel 1 AMN Trigger 1 1 AKN Right Handle 1 1 AJM 1 2 AMU Wheel 2 AJC 1 AJE 1 AEF 2 AKP 1 AMT 1 HARDWARE LIST ID Item Description Qty BCO Pole Assembly Hardware ADS 2 2 ADA 2 AAF 3/8 Washer 2 2 CIH 2 BCQ Pole to Base Assembly Hardware AAO 2 5/16 Washer AAE /16 Allen Wrench 2 6

7 HARDWARE LIST ID Item Description Qty BCS Backboard to Rim Assembly Hardware AAS /16 Washer 2 7/16 Rubber Washer 2 AAJ 2 AOW Spring Retainer Plate 1 AAV 5/16 Jam Nut 2 1 AJW Compression Spring 2 Rim Support Channel 1 ADQ 2 BCR Backboard to Pole Assembly Hardware BCT Handle Assembly Hardware AAN 5/16 Cap Nut AAM ADJ 1 1 ADR 2 ADT 7 ACZ 2 AQH Trigger Spring 1 1 7

8 Parts shown at 10% of Actual Size PARTS IDENTIFIER ALH Top Pole Middle Pole *Warning Sticker applied to side not shown ALE ALB Outer Tube AKQ Inner Channel ALI 15 3/4 17 AKC 7 AKB 8

9 Parts shown at 10% of Actual Size PARTS IDENTIFIER ALX Rim AKZ Net Parts shown at 5% of Actual Size Part shown at Actual Size 9

10 Parts shown at 25% of Actual Size PARTS IDENTIFIER AKL AKN Right Handle AMU Wheel Counterbalance Spring ALL AMN Trigger 10

11 POLE ASSEMBLY HARDWARE Hardware shown at Actual Size HARDWARE IDENTIFIER ABH 3/8 Washer ADA ADS POLE TO BASE ASSEMBLY HARDWARE Hardware shown at Actual Size CIH Domed Counter ABB AAE BTS ABD 5/16 Washer ABN BZO AAO BACKBOARD TO RIM ASSEMBLY HARDWARE Hardware shown at Actual Size AAS AAV 5/16 Jam Nut ABS 11 ADQ

12 HARDWARE IDENTIFIER BACKBOARD TO RIM ASSEMBLY HARDWARE (CONTINUED) Hardware shown at Actual Size ABI AAB ABD 5/16 Washer 7/16 Rubber Washer ABK Hardware shown at 25% of Actual Size BNP AOW Spring Retainer Plate AOX Rim Support Channel Compression Spring BACKBOARD TO POLE ASSEMBLY HARDWARE Hardware shown at Actual Size ABP Poly Spacer ABL Spacer 6 5/8 AAX (Not actual length) ADG 12

13 HANDLE ASSEMBLY HARDWARE Hardware shown at Actual Size HARDWARE IDENTIFIER AAL AAN 5/16 Cap Nut AAM 6 1/2 ACZ AQG (Not actual length) ABA ABB 6 5/8 ADG (Not actual length) AAX AQH Trigger Spring ADR Pan Head Screw ADT 13

14 1 POLE ASSEMBLY HARDWARE REQUIRED Hardware shown at Actual Size ABH ADA 3/8 Washer ADS Parts shown at 10% of Actual Size ABB Nut PARTS REQUIRED CIH Part shown at 25% of Actual Size ALH Top Pole ALL Middle Pole *Warning Sticker applied to side not shown ALE TOOLS REQUIRED Phillips Screwdriver 9/16 Wrench Scrap Wood

15 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE ADS CIH 1.1 Align the hole in the Top Pole (ALH) with the slot in the and slide the Top Pole over the Middle Pole. Insert a through a Domed Countersink Washer (CIH) and into the small hole in the Top Pole and into the slot in the Middle Pole as shown. ALH ALH CIH ADS Warning Sticker! Note: The 1/4 x 3/4 Screw and Domed Countersink Washer should be fl ush with the Pole, but will spin freely once installed. Do not jam the Poles together until instructed. 15

16 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE ADS CIH 1.2 Align the hole in the with the slot in the Bottom Pole (ALE) (ADS) through a Domed Countersink Washer (CIH) and into the small hole in the CIH ALE ADS ALE! Note: The 1/4 x 3/4 Screw and Domed Countersink Washer should be fl ush with the Pole, but will spin freely once installed. Do not jam the Poles together until instructed. 16

17 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 9/16 ADA ABB ABH 1.3 Insert the 3/8 x 3 1/2 Hex Bolts (ABH) with the into the as shown. Then slide the 1/2 x 2.91 Spacers (ADA) Pole Bracket (ALL) with the hardware shown. ABH ADA Small holes Large holes ALL ABB 17

18 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE Scrap Wood ATTENTION: THIS STEP CANNOT BE REVERSED! times on a piece of scrap wood or cardboard. This must be done even if the Poles cover the slots before seating has occurred. If the do not completely cover the slots on the after seating, DO NOT COMPLETE ASSEMBLY. Call our Customer Service Department. ALH ALE WARNING The Poles must be seated together! Even if the Poles cover the slots before seating, they must be struck on a hard surface fi ve to six times! Failure to seat the Poles correctly could allow the Poles to separate during use, which could lead to serious personal injuries or property damage.! Note: Do not hit your feet with the Pole sections, as serious injury could occur. 18

19 2 POLE TO BASE ASSEMBLY HARDWARE REQUIRED Hardware shown at Actual Size AAE BTS ABD 5/16 Washer ABN BZO Part shown at 5% of Actual Size PARTS REQUIRED AAO Part shown at 25% of Actual Size AMU Wheel Parts shown at 10% of Actual Size ALI 15 3/4 7 TOOLS REQUIRED 1/2" Wrench CCL-3/16 Allen Wrench 19

20 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE AAE AAO ABD ABN 2.1 Attach the fl attened end of the Pole Brace (ALI) to the with the hardware shown. Only fi nger tighten the hardware for now. ALI Curved End! Straight End ABD AAO AAE ABD Note: Repeat this step to install the other Pole Brace to the other side of the Base. 2.2 Slide the through the Wheels (AMU) and the holes at the end of the Bottom Pole (ALE) as shown. Slide the shown. Then slide two 1/2 x 1/8 Spacers (ABN) and position them against the Wheels. AMU AMU ALE ABN ABN 20

21 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3/16" 1/2" BZO BTS 2.3 facing down. Position the under the bottom slots of the the Attach the Pole Braces (ALI) to the Bottom Pole (ALE) with the hardware shown, and tighten all Pole to Base assembly hardware. BTS ALI ALI BZO ALE! Note: Tip the system forward so the Pole rests on the ground. Do not stand the system up until it is filled with either sand or water later in the assembly. 21

22 3 BACKBOARD TO RIM ASSEMBLY HARDWARE REQUIRED Hardware shown at Actual Size AAS ADQ ABI AAB AAV 5/16 Jam Nut ABS 7/16 Rubber Washer ABD 5/16 Washer ABK Hardware shown at 25% of Actual Size AOW Spring Retainer Plate AOX Rim Support Channel Compression Spring BNP 22

23 3 BACKBOARD TO RIM ASSEMBLY PARTS REQUIRED Parts shown at 10% of Actual Size ALX Rim Part shown at 5% of Actual Size TOOLS REQUIRED Pliers 1/2 Wrench 7/16 Wrench 23 3/8 Wrench

24 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 7/16 BNP AAS (Not to scale) ABS AAB 3.1 Slide the through the as shown. BNP Notch BNP 3.2 Hex Bolts (AAS), two 1/2 x 2 5/16 Galvanized Spacers (ABS), and two Centerlock Nuts (AAB). AAB ABS AAS AAS AAB! Note: Tighten the hardware securely now.

25 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1/2 ABI ABD 3.3 Insert two with the 5/16 Washers (ABD) and the Rim (ALX) as shown, and secure the hardware with two. ALX ABI ABD ALX ABI ABI! Note: Make sure that the 5/16 x 2 1/4 Tap Bolts are positioned on the outside edge of the holes as shown.! Incorrect Note: Do not overtighten the hardware so that the 7/16 Rubber Washers bulge outward as shown. 25 Correct

26 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1/2 AOX (Not to scale) AAV ABK Place the Rim Support Channel (AOX) so that the flat side with holes is positioned up against the through the upper BNP AOX 3.5 Connect the Rim (ALX) to the with the hardware shown. Thread the all the way down on the. (ABK) onto the. ALX ABI AAV AAV BNP ABK ABK 26

27 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1/2 AOW (Not to scale) (Not to scale) ABK 3.6 Slide the onto the, and place the Spring Retainer Plate (AOW) over the Compression Springs. Tighten the until the Rim (ALX) does not wobble to complete this step. ALX AOW ABK BNP! Note: DO NOT COMPLETELY TIGHTEN THE 5/16 NYLOCK FLANGE NUTS IN THIS STEP! Only tighten the Nuts until the Rim does not wobble. Tightening the Nuts will adjust the Rim tension. 27

28 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3/8 ADQ 3.7 outward by hand the ADQ ADQ 28

29 BACKBOARD TO POLE ASSEMBLY HARDWARE REQUIRED Hardware shown at Actual Size ABP Spacer ABL Spacer 6 5/8 AAX (Not actual length) ADG Parts shown at 10% of Actual Size PARTS REQUIRED 17 AKC AKB Part shown at 25% of Actual Size Counterbalance Spring TOOLS REQUIRED 7/16 Wrench 29 Rubber Mallet

30 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 7/16 Place one end of the over the lower 1/2 x 2 5/16 Galvanized Spacer (ABS) as shown. ABS! Note: It may be necessary to use a Rubber Mallet to snap the Counterbalance Spring into place. If the Rubber Mallet does not work, undo the hardware in the image that has been shaded gray. Slide the Counterbalance Spring over the Spacer after it has been detached. Then replace and re-secure the hardware. 30

31 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE ADG 6 5/8 (Not actual length) ABL AAX Secure the Short Extension Arms (AKC) the location shown with the hardware indicated. AKC AKC AAX ABL ABL ADG AKC! Note: Tighten the 1/2 Centerlock Nut (AAX) until it is flush with the end of the Bolt. 31

32 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 6 5/8 ADG (Not actual length) ABL AAX Secure the Long Extension Arms (AKB) location shown with the hardware indicated. AAX AKB ABL ABL AKB ADG AKB! Note: Tighten the 1/2 Centerlock Nut (AAX) until it is flush with the end of the Bolt. 32

33 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 6 5/8 ADG (Not actual length) ABP AAX CAUTION: HAVE ONE ADULT HOLD THE BACKBOARD IN PLACE UNTIL ASSEMBLY HAS BEEN COMPLETED! Pole assembly. Rest the Rim on cardboard to prevent scratching. Then secure the Short and Long Extension Arms (AKC & AKB) to the Pole Assembly with the hardware shown. AKC AKC AAX ADG ABP ABP AAX ADG AKB ABP ALH ABP AKB! Note: Tighten the 1/2 Centerlock Nut (AAX) until it is flush with the end of the Bolt. 33

34 5 HANDLE ASSEMBLY Hardware shown at Actual Size HARDWARE REQUIRED AAL AAN 5/16 Cap Nut AAM 6 1/2 ACZ AQG (Not actual length) ABA ABB 6 5/8 (Not actual length) ADG AAX AQH Trigger Spring ADR Pan Head Screw ADT

35 5 HANDLE ASSEMBLY Parts shown at 10% of Actual Size PARTS REQUIRED ALB Outer Tube AKQ Inner Channel Parts shown at 25% of Actual Size AKL AKN Right Handle AMN Trigger TOOLS REQUIRED Phillips Screwdriver 7/16 Wrench 1/2 Wrench 9/16 Wrench 35

36 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE ADR AQG 5.1 Secure the Lock Tab (AQG) to the Trigger (AMN) with the hardware shown. ADR ADR AQG! Note: Make sure the Lock Tab is oriented as shown when attaching the Tab to the Trigger. AMN 5.2 Place the Right Handle (AKN) onto the Outer Tube (ALB) so that the notch of the Outer Tube fi ts within the Handle as shown. ALB AKN! Note: Make sure that the Inner Channel (AKQ) has been removed from the Outer Tube before performing this step. 36

37 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE ADT AQH 5.3 Place the Trigger Spring (AQH) onto the Trigger (AMN) as shown. Then place the Trigger inside the Right Handle (AKN) so that the Lock Tab (AQG) fits into the slot on the Outer Tube (ALB) as shown. ALB AQG AMN AQH AKN! Note: Pull the Trigger to ensure it moves correctly before attaching the Left Handle (AKL). Place the Left Handle (AKL) over the Right Handle (AKN) as shown, and attach the Handles to the Outer Tube (ALB) with the hardware shown. ALB ADT ADT ADT AKN ADT ADT AKL! Note: To prevent stripping the holes in the Handles, do not overtighten the #6 x 5/8 Screws (ADT). 37

38 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 7/16 AAL 5.5 Insert the through the holes indicated on the Outer Tube (ALB).. AAL ALB WARNING Do not overtighten the Cap Nut. If the end of 38

39 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1/2 AAM AAN 5.6 While depressing the Trigger (AMN), insert the notched end of the Inner Channel (AKQ) into the Outer Tube (ALB). Continue to insert the Inner Then release the Trigger. ALB! Note: Ensure that the notches on the Inner Channel face the Handle as shown. AKQ 5.7 Attach the end of the Inner Channel (AKQ) to the Pole Bracket (ALL) with the hardware shown. AAM ALL AAN WARNING Do not overtighten the Cap Nut. 39

40 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE ADG 6 5/8 (Not actual length) ACZ AAX 5.8 Secure the end of the Outer Tube (ALB) to the Long Extension Arms (AKB) with the hardware shown. ADG AAX AKB ACZ ACZ AKB ALB! Note: Tighten the 1/2 Centerlock Nut (AAX) until it is flush with the end of the Bolt.

41 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 6 1/2 9/16 (Not actual length) ABA ABB 5.9 Insert the 3/8 x 6 1/2 Hex Bolt (ABA) through the holes in the Short Extension Arms (AKC) 3/8 Centerlock Nut (ABB). ABA AKC AKC ABB! Note: Tighten the 3/8 Centerlock Nut until it is flush with the end of the Bolt.

42 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE Wrench 5.10 Using the closed end of a Wrench, stretch the up and over the 3/8 x 6 1/2 Hex Bolt (ABA) as shown. ABA! Note: Make sure all hardware has been securely tightened before moving to the next section.

43 6 HARDWARE REQUIRED NO HARDWARE REQUIRED FOR THIS TION Part shown at 10% of Actual Size PARTS REQUIRED AKZ Net Part shown at Actual Size TOOLS REQUIRED Sand (362 lb) Water Hose

44 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE SAND (362 lbs) Two adults are required to complete assembly. To prevent serious injuries, the Pole should be held down by one adult at all times while the Base is being filled. 6.1 (362 lb of sand required) a. Insert a into the in the hole closest to the Pole. WARNING For safety reasons, we recommend that sand be used instead of water to fill the Base. If a leak develops, water could run out unnoticed, allowing the system to fall over, resulting in serious personal injuries, or property damage. If using Water, check the Base carefully for leaks. If a leak is found, lay the system down on the ground and call Customer Service. Do not use, stand up, or play on a leaking system.

45 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE Two adults are required to complete assembly. To prevent serious injuries, the Pole should be held down by one adult at all times while the Base is being filled. 6.1 a. Insert a into the in the hole closest to the Pole. d. Add one tablespoon of chlorine bleach to the water to prevent algae formation. hole furthest from the Pole.

46 TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 6.2 Attach Net (AKZ) to the Rim (ALX). ALX AKZ! 6.3 Note: If a replacement Net is needed, please call our Customer Service Department. Our Nets are shorter than average to reduce the risk of entanglement. Pull the Handle all the way down so the system is at the highest setting. Height Sticker (AKP) with the arrow on the Left Handle (AKL) AKP AKL

47 OPERATION OF HEIGHT ADJUSTMENT SYSTEM MOVING THE SYSTEM WARNING: The system must only be moved by people capable of handling its weight. Children should not be allowed to move the system. b. Stand in front of the system and pull on the Pole until the unit is balanced on its Wheels. CAUTION: The system must only be moved on its Wheels. Sliding the system tipping over. POLE CARE AND SYSTEM MAINTENANCE that have been worn or damaged through usage. Contact our Customer Service Department for replacement parts. are present, do the following: 1. Use an emery cloth to completely remove any rust or chipped paint. 2. Clean the area with a damp cloth and allow it to dry. 3. Apply two coats of a rust preventative, high gloss enamel paint to the area. Allow the paint to dry between coats.

48 NOTES

49 NOTES

50 ENHANCE YOUR LIFETIME PURCHASE BY ADDING ACCESSORIES OR OTHER GREAT PRODUCTS: To purchase accessories or other Lifetime Products, visit us at: Or call:

51 WARNING PROPERTY DAMAGE. penetrated any steel part, replace that part immediately. operation of the system. wear, instability, and signs of corrosion and repair before use. the rim as soon as safely possible. system in an area protected from the wind or in an area away from property that may be damaged if the system falls, and from overhead power lines. guard during play. void the warranty. unit standing in an upright position without first filling the base with weight or moving parts. entangle in net. corrosion and/or deterioration. ADVERTENCIA SI NO SE OBEDECEN ESTAS ADVERTENCIAS PUEDEN PRODUCIRSE GRAVES LESIONES Y/O DAÑOS A LA PROPIEDAD. segura. AVERTISSEMENT SURES GRAVES ET/OU DES DOMMAGES À L ÉQUIPEMENT. con seguridad. producirse lesiones graves si los dientes o la cara entran en contacto con el causar graves lesiones personales. regule la altura o desplace el sistema. de energía. para elevar solamente el peso del tablero con el aro. No cuelgue nada de la possible. graves blessures si ses dents ou son visage entrent en contact avec le panneau, blessures. pièce en question. 51

52 WARRANTY INFORMATION UNAVAILABLE OR OBSOLETE. defects is defined as imperfections that impair the use of the product. Defects resulting from misuse, abuse or negligence will void this warranty. This warranty does not cover defects due to improper installation, alteration or accident. This warranty does not cover damage caused by vandalism, rusting, acts of nature or any other event beyond the control of the manufacturer. Inc. will repair or replace defective parts at no cost to the purchaser. Shipping charges to and from covered under this warranty. 3. This warranty does not cover scratching or scuffi ng of the product that may result from normal usage. In addition, defects resulting from intentional damage, negligence, unreasonable use or hanging from the net or rim will void this warranty. merchandise is sold on this condition, and no representative of the company may waive or change this policy. any liability for such use. Institutional or commercial use will void the warranty. Products, Inc., nor any representative assumes any other liability in connection with this product. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state. ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A SALES RECEIPT. **Call or visit our Web site for Saturday hours** Please include your dated sales receipt and photographs of damaged parts. To register the product, visit our Web site at

MODEL N 1529 OWNER S MANUAL

MODEL N 1529 OWNER S MANUAL 1 SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Most injuries are caused by misuse and/or not