innovative panel products to make your life easier
|
|
- Brianna Singleton
- 5 years ago
- Views:
Transcription
1 innovative panel products to make your life easier The labour saving way to give the appearance of Tongue and Groove panelling without the problems of shrinkage YORK G416 Double V Groove and Bead Long Cut (split edge) and Cross Cut (square edge) with mm centres on Moisture Resistant MDF available ex-stock in 2440x1220mm and 3050x1220mm, in 9mm and 18mm thicknesses Other sizes, thicknesses, profile spacings and MDF specifications (including Medite Tricoya, Medite Ecologique and Fire Retardant) available made-to-order Further Profiles available on made-to-order basis, including: HEMEL G414 Channel ELY G417 Single V Groove, Bead & Butt OXFORD G418 Classic V Groove CANTERBURY G420 Double fine-line V Groove ABERDEEN G421 V Groove with flat bottom NOTTINGHAM G422 Fluted WINDSOR G423 Shiplap Visit for Case Studies, Technical Information, and Fabrication Tips and Techniques
2 Save fabrication time and improve product quality for all curved surfaces Create freestanding curves or fix to a framework and produce a wide range of smooth curved surfaces Panels can be laid-up flat with veneers or laminate before bending Excellent seam hiding qualities Follows intended curve without bumps or hollows Ready to paint and stain Repeatability is great and results are predictable Applications include Columns, Counter Fronts, Wavy Walls, Ceilings, Stage & Film Sets and Furniture Medite MDF grooved long cut or cross cut Available ex-stock in 6mm and 9mm MDF, with other thicknesses and specifications machined to order Depending on the application, bending radius of 150mm (6mm MDF) or mm (9mm MDF) may be achievable. Recommended for Heavy Duty applications Available in Cross Cut only, with typical bending radius of 300mm Available in Medite Ecologique up to 19mm thick, and other specifications of MDF, including Fire Retardant and Medite Tricoya, up to 9mm thick. MDF faced with Poplar Plywood to provide 19mm thick bending product with an attractive natural wood finish Available in Cross Cut only, with typical bending radius of 300mm Visit for Case Studies, Technical Information, and Fabrication Tips and Techniques
3 FINISHING SERVICES Available on all Neat products and as standalone service on Free Issue materials Wet Paint Dry Powder High capacity CEFLA spray-line providing cost effective and fast turnaround Suitable for MDF, OSB and Birch Plywood Wide range of water based paints & lacquers, with UV and infra-red curing available. Colour matching to dry samples or any RAL or BS Number Powder coated MDF All powders are free of Volatile Organic Compounds (VOCs), and provide hard, durable finish with excellent resistance to impact, stains and abrasions. Growing range of powders in solid colours and metal effects, available from Akzo Nobel s Interpon 700 and Fiji D1036 ranges Stains & Lacquers Top Coats up to 40% sheen
4 BESPOKE MACHINING SERVICES Available on Neat supplied and Free Issue materials Surface Machining Wide range of tooling and set-up configurations available on customised CNC machinery, for modern and traditional designs. Cutting High capacity beam saw for straight cuts up to maximum panel width of 3mm Edge Profiling Services include: Tongue & Groove (2 or 4 edges) Lap Joints Chamfer Edges Pencil Rounds Bonding Gluing and cold pressing of MDF and birch plywood with laminates and foils Edgebanding also available
5 The aesthetically pleasing and cost effective solution for sound absorption and reduced reverberation times Recommended for use within schools and colleges subject to specific acoustic requirements, plus cinemas, theatres, libraries, museums and many other applications Available in any specification of MDF, including Melamine Faced and pre-veneered, and Birch Plywood. Spacing configurations can be tailored to % open area specifications, with bespoke designs available as special orders. Black acoustic fleece applied to reverse as standard. Also Available: Squiggles STANDARD HOLE PATTERNS 0 Product Code: H6-16 6mm diameter holes, in grid pattern with 16mm centre-tocentre Sound Absorption Class C (α w =0) Open Area 11% Product Code: H mm diameter holes, in grid pattern with 24mm centre-tocentre Sound Absorption Class C (α w =5) Open Area 19% Ovals Diamonds STANDARD SLOTTED PATTERNS Circles Product Code: HS3-32 3mm wide shallow slots running the length of the board at 16mm intervals. Slots on reverse face. Sound Absorption Class D (α w =5) Open Area 3% Product Code: HS3-32 3mm wide shallow slots running the length of the board at 32mm intervals. 12mm holes on reverse face. Sound Absorption Class D (α w =0) Open Area 3% Sound Absorption tests to BS EN ISO 354:3, and results calculated to EN ISO 11654:1997
6 Decorative Screening Panels with a host of applications around the home, workplace and in public areas Ideal for use as grille inserts in radiator covers, cabinet and door panel inserts Conceal equipment that requires ventilation, such as boilers and computers Create privacy areas within restaurants and on Exhibition Stands Available ex-stock in 1830 x 607 x 4mm Pre-sanded for staining, or available primed and ready for painting Also available as special orders in any thickness of MDF up to 18mm, and in 2440x1220mm Amsterdam Open Area 35% Berlin Open Area 38% Brussels Open Area 39% Florence Open Area 25% Madrid Open Area 57% Malmo Open Area 22% Merchant Stamp F25 Hastingwood Trading Estate Harbet Road, London N18 3HU Tel: Fax: info@neatconcepts.com
Plywood. structural, building & decorative. Performance with quality. veneers P laminates P plywood P flooring P timber P trade
Plywood structural, building & decorative Performance with quality veneers P laminates P plywood P flooring P timber P trade Performance with quality Amerind is a leading Australian distributor of premium
More informationProcessing and design Solid Textile Board
Processing and design Solid Textile Board List of contents Introduction Kerfing Joints and assembly Increasing thickness and stiffness Edges Cutting Milling and drilling Three-dimensional pressing Surface
More informationPerforated. Timber Acoustic Panels
Perforated Timber Acoustic Panels 2 Perforated timber acoustic panels Combining carpentry expertise with acoustic knowledge to give maximum control over sound and aesthetics Groove panels Perforated acoustic
More informationGroove. Timber Acoustic Panels
Groove Timber Acoustic Panels 2 Groove - timber acoustic panels Combining carpentry expertise with acoustic knowledge to give maximum control over sound and aesthetics Groove panels The ultimate renewable
More informationHOW TO INSTALL ELITE PANELED WAINSCOTING Using X-Rails with Either Raised, Flat or Beaded Panels
HOW TO INSTALL ELITE PANELED WAINSCOTING Using X-Rails with Either Raised, Flat or Beaded Panels 1. First, remove the cover plates from all electrical outlets. All baseboards should also be removed; the
More informationElam -range of products: Vanha Porvoontie 36 FIN MÄNTSÄLÄ Phone: +358 (0) Fax: +358 (0)
Technical brochure Nr 1 12.12.2013 Fire retardant wood based panels Complete system for ceilings and walls Elam -range of products: Elam -products involve a range of decoratively surfaced fire retardant
More informationTIMBER MOULDINGS FAST TURNAROUND SERVICE LARGEST AMOUNT OF PROFILES IN THE COUNTRY QUALITY GUARANTEED DELIVERY TO YOUR DOOR ANY MOULDING MATCHED
TIMBER MOULDINGS FAST TURNAROUND SERVICE LARGEST AMOUNT OF PROFILES IN THE COUNTRY QUALITY GUARANTEED DELIVERY TO YOUR DOOR ANY MOULDING MATCHED MATCH YOUR MOULDING If you have a moulding that you can
More informationA F LCON PANEL PRODUCTS LTD
& Facings FA LCN PANEL PRDUCTS LTD Door Core General: Strebord doors for internal use should be Lippings, particularly lippings at the closing & lipped on two vertical edges in hardwood as a meeting stiles
More informationFLAMEBREAK. Lippings & Facings 1. General: Rev.D
FLAMEBREAK Lippings & Facings 1 General: TM FLAMEBREAK Door Blanks are supplied with mixed tropical hardwood stiles and rails as part of the core structure. The stiles and bottom rail can be removed for
More informationL u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E
L u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E MISCELLANEOUS x o t i c L u m b e r M D F V e n e e r
More informationDisplay Case (for J&S)
Display Case (for J&S) This is constructed of maple plywood with solid maple (soft maple) edge banding. It was made to fit between a door and a kitchen cabinet, and has an elegant circular taper between
More informationFLEXIBLE PANELS PRODUCT GUIDE
FLEXIBLE PANELS PRODUCT GUIDE www.lathamtimber.co.uk FLEXIBLE MDF James Latham stock a range of Flexible MDF to compliment Flexible plywood. Flexible MDF has precision machined slots across the length
More informationTripanel Marine Technical Bulletin
Tripanel Marine Technical Bulletin Figure 1 Cabinet joints can be accomplished by four methods: a) rabbet one panel to the proper thickness of joining panel and epoxy joint b) dado to thickness of joining
More informationSLATWALL PANELS PEGBOARD PANELS HPL, TFL & MELAMINE PANELS PAINTED PANELS SHELVING & DRAWER PARTS CABINET COMPONENTS CUSTOM FABRICATION
SLATWALL PANELS PEGBOARD PANELS HPL, TFL & MELAMINE PANELS PAINTED PANELS SHELVING & DRAWER PARTS CABINET COMPONENTS CUSTOM FABRICATION COMPONENT WOOD PRODUCTS adding value... One panel at a time. PRODUCTS
More informationspecification guidelines installation guidelines wood-skin.com mesh sheets 1
specification guidelines installation guidelines wood-skin.com mesh sheets 1 Mesh sheets is a new way to design curvy and smooth surfaces from flat sheets. This fantastic technology unlocks the design
More informationLeading French Manufacturer of Furniture Components
Leading French Manufacturer of Furniture Components Interior fittings, institutions, industry, recreation Interior Fittings Kit & Folding Wrapped Drawers, Solid Drawers Plywood Birch Drawers and Storage
More informationSecondary Wood Processing Manufacturing Processes 2015
Secondary Wood Processing Manufacturing Processes 2015 Manufacturing Process Example: Manufacturing of a Sideboard Panel Material for Table Top Solid Wood Doors Hardware Manufacturing Process Example:
More informationClassic Kitchen Island
America s leading woodworking authority Step by Step construction instruction. A complete bill of materials. Classic Kitchen Island Exploded view and elevation drawings. How-to photos with instructive
More informationMOULDING & MILLWORK FALL 2017
MOULDING & MILLWORK FALL 2017 Our specially trained millwork team can help you find your perfect style. Visit our showroom to get started. TABLE OF CONTENTS Casings...2 Base... 3 Crown... 4 Miscellaneous...5-6
More informationsheet materials decorative veneered boards specialist boards added value services
sheet materials decorative veneered boards specialist boards added value services 2 sheet materials introduction As part of the Brook Bros complete timber products portfolio and its one-stop-shop policy,
More informationCraftform. The tradesman s essential guide
Craftform The tradesman s essential guide Craftform The tradesman s essential guide The Craftwood panel with unlimited possibilities Trade Essentials Craftform is the Craftwood panel with unlimited possibilities
More informationS.NO Description Quantity Rate Amount
INTERIOR WORKS NANDIMANDALAM BRANCH S.NO Description Quantity Rate Amount 1 Full height partition with laminate finish and glass. Providing & fixing partly glazed partly paneled Dry Wall Partition with
More informationInstallation Instructions
www.marlite.com Effective Date 03/01/2018 ARTIZAN FRP, SYMMETRIX FRP, ENVUE FRP, STANDARD FRP Installation Instructions Statements expressed in this technical bulletin are recommendations for the application
More informationTimberflex & Flexboard Technical Guide
Timberflex & Flexboard Technical Guide A bendable substrate material that can be formed first and laminated last Patent #5,618,601; #5,232,762; #5,824,382 Doors Larger radius and small doors are easily
More informationFABRICATING ARBOR. koroseal.com/arbor Arbor Veneered Components
Arbor Veneered Components Arbor natural wood veneer can be applied to any substrate and is flexible enough to be formed around the tightest radii providing the ultimate wood finish. From vertical wall
More informationSpokane Hardware Supply, Inc.
Decorative Hardware Hinges Router Bits Cabinet Organizers Furniture Components STRAIGHT BITS, CARBIDE TIPPED - SINGLE, PLUNGE CUT Optimum chip clearance. Specially designed tip for fast plunge cutting.
More informationM E E T I N G S O L U T I O N S
MEETING SOLUTIONS ensa SOLO CREDENZA SIZES 1200w x 670h x 500d (mm) - 2 Door 1800w x 670h x 500d (mm) - 3 Door 2400w x 670h x 500d (mm) - 4 Door ENSA TABLE SIZES The triangulated legs are beautifully detailed,
More informationWe are proud of our History...
1 We are proud of our History... From 1903 to the present day, Atkinson & Kirby have taken pride in the quality of their wood with rigorous inspection at various stages of production. With so many years
More informationRouting Tools. Profile Tooling. Single Edge Solid Carbide V Bottom. Double Edge Solid Carbide Upcut Spiral Ball Nose. Phone:
Single Solid Carbide V Bottom Softwood: Cedar, Cottonwood, Pine and Redwood Hardwood: Ash, Beech, Birch, Cherry, Mahogany, Maple, Oak, Poplar, Teak and Walnut Composite Wood: MDF, Particle Board and Plywood
More informationStandard Solo 8 planks in maple veneer with aligned 1/2 reveal create a panelized appearance. 1/2 Reveal. Plank thickness 5/8 (16 mm)
1/2 Reveal Solo is an acoustical wood plank consisting of a medium density fibreboard (MDF) finished in a natural wood veneer. The face is grooved, the plank is perforated from behind and the back is laminated
More informationSLIDING SYSTEMS. Product catalog 2017
SLIDING SYSTEMS Product catalog 2017 Grafipro Oy Product catalog 2017 Table of contents: 3 Areas of use 4 C rails C-30 is a company specialising in aluminium and plastic composite materials. Our expertise
More informationPRODUCT CATALOGUE WOOD PRODUCTS:
2009 200 PRODUCT CATALOGUE WOOD PRODUCTS: VitalWOOD VitalWOOD MDF MDF Melamine Boards VitalFLOOR HDF Laminated Flooring VitalPLY Plywood VitalPLY WBP Marine Plywood VitalBOARD Hard Board BMD sales@vital.com.sg
More informationUnit 2 Engineered Panels
Unit 2 Engineered Panels MULTICHOICE 1. What is another name for large, reconstituted wood sheets or panels? (A) formed panels (B) engineered panels (C) architectural panels (D) construction panels 2.
More informationCD Structural Plywood (F8) Density Approximately 550 kg/m 3 in Radiata pine Approximately 580 kg/m 3 in Taeda and Slash pine
Plywood This versatile range of plywood is ideal for a host of applications from cabinetry, furniture, and walls to ceilings, joinery, and eaves lining. You ll also find products that are suitable for
More informationSPECIAL PRODUCTS FOR EVERY CHALLENGE, A SOLUTION.
SPECIAL PRODUCTS FOR EVERY CHALLENGE, A SOLUTION. 01 TERRACE COMFORT PLANK A minimised deformation due to bonding Edge-grain minimises any warping, with hardly any fibre separation Homogeneous appearance
More informationWET AREA PANELLING. Designer Walls. Fast
WET AREA PANELLING Designer Walls. Fast AU/a5 WallART Brochure_ART BUNNINGS.qxp_Layout 1 7/6/18 10:16 am Page 3 LINEAR SERIES WET AREA PANELLING Add a touch of class to your SHEET COLOURS home or workplace
More informationvision Seating systems for demanding audiences The Vision Set has been awarded the Golden MTP 2006 Medal Project: Charaziak Design Studio
Seating systems for demanding audiences auditoria sports facilities all rights reserved Universal use, functionality and fine looks make the Vision seating system ideal for all kinds of facilities. Vision
More informationTIMBERIX WOODEN GROOVED PANEL
TIMBERIX WOODEN GROOVED PANEL Pattern 13-3 Pattern 14-2 Pattern 28-4 TIMBERIX wooden grooved panels reduce echoes by trapping and diffracting sound in the grooves and perforation found on the surface.
More informationLinda Barker Collection Heritage Collection Classic Collection INSTALLATION GUIDE
Linda Barker Collection Heritage Collection Classic Collection INSTALLATION GUIDE Ruler Pencil Masking tape Measuring tape Silicone sealant & silicone gun Power drill & screwdriver High-grab adhesive Jig
More informationSOURCED FROM THE BALTIC. MANUFACTURED AS PER EUROPE. Kingdom Resources Baltic Birch Plywood Plant, Suqian City, Jiangsu Province, China
SOURCED FROM THE BALTIC. MANUFACTURED AS PER EUROPE. Kingdom Resources Baltic Birch Plywood Plant, Suqian City, Jiangsu Province, China The Kingdom Group Backed by 107 years of priceless experience in
More informationmultipanel Installation (panels) CONTENTS
multipanel Installation (panels) The following is an installation guide for fitting multipanel to walls, tiles, plaster, chipboard or concrete. A separate guide is available for fitting multipanel shower
More informationIndustrial Technology
2017 HIGHER SCHOOL CERTIFICATE EXAMINATION Industrial Technology Timber Products and Furniture Technologies General Instructions Reading time 5 minutes Working time 1 1 2 hours Write using black pen Draw
More informationWet Area Panelling. Linear Series
Wet Area Panelling Linear Series LINEAR SERIES WET AREA Add a touch of class to your home or workplace with the Linear Series, WallART s line of wet area panelling. With a striking range of colours and
More informationINSTALLATION INSTRUCTIONS FOR ELKALAMINATE. IN ORDER TO OBTAIN A GOOD RESULT, WE ADVISE TO FOLLOW ALL GIVEN INSTRUCTIONS CAREFULLY.
INSTALLATION INSTRUCTIONS FOR ELKALAMINATE. IN ORDER TO OBTAIN A GOOD RESULT, WE ADVISE TO FOLLOW ALL GIVEN INSTRUCTIONS CAREFULLY. PREPARATION Let the planks acclimatize for 48 hours in the unopened packaging
More informationRequired Tools. Installation of Hook Plates & Discs. Professional Installation Guidelines for Engineered Wood & Hardwood with LocPlate Products
Professional Installation Guidelines for Engineered Wood & Hardwood with LocPlate Products Required Tools Utility Knife Chalk Line Measuring Tape Conventional cutting tools for Engineered Wood and Solid
More informationVCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2002 SUPERVISOR TO ATTACH PROCESSING LABEL HERE Figures Words STUDENT NUMBER Letter VCE VET FURNISHING (CABINET MAKING) Written examination Friday 1 November 2002 Reading
More information60/30 CLASSIC STEEL SHELVING EUR PRICE LIST
60/ CLASSIC STEEL SHELVING PRICE LIST 0.0.08 60/ CLASSIC STEEL SHELVING The 60/ Classic Steel Shelving system is the essence of many years of experience and success. This flexible product concept has evolved
More informationLIFE IS NOT A STRAIGHT LINE
LIFE IS NOT A STRAIGHT LINE It wasn t nature that created straight lines: it was the limitations of technology. Bolefloor allows a return to a natural state: organic lines as nature intended. Boleform
More informationADHESIVES COATINGS. Surface Finishing. HotCoating roll material
ADHESIVES COATINGS Surface Finishing HotCoating roll material ADHESIVES COATINGS Klebchemie M. G. Becker GmbH & Co. KG, producer of Kleiberit products modern and innovative. The company s competence is
More informationCLASSIC RANGE PLUS RANGE PHOTO WALL. Pre-installation check-list
CLASSIC RANGE PLUS RANGE PHOTO WALL The following is an installation guide for fitting Multipanel CLASSIC RANGE, PLUS RANGE, PHOTO WALL Jig saw or Hand saw Measuring Tape Ruler Pencil High-grab adhesive
More informationDANNY S CABINETS & MFG
fold BEAUTIFUL DOORS AND DRAWERS DANNY S CABINETS & MFG 615 Trice Cemetery Rd., Thomaston, GA 30286 phone: 706.647.9287 fax: 706.646.3487 www.dannysmfg.com Graphic Design by db graphix fold DANNY S CABINETS
More informationINFORM COUNTER SYSTEM
DETAILS The Counter System is a modular piece of furniture. Its straight and rounded elements allow it to be used as a single counter and/or be randomly combined. The special design of the table tops and
More informationN2 Specs NORA N2 TECHNICAL SPECS N2 is a system of desks and panel units providing both electrification and functional solutions with accessories. SYSTEM N2 system consists of metal profile frames connected
More informationTake a closer look...
NEW PROFILES ADDED W.Howard UK has 3 facilities; W.Howard Limited in Manchester, Polyco Limited in Powys and our London Distribution Centre in West Thurrock. Our stock range of white primed, veneered and
More informationW.Howard Catalogue. Issue No.5
W.Howard Catalogue Issue No.5 W. Howard Limited The Leing Edge in MDF Moulding With over 50 years experience in the timber industry, we pride ourselves in being a progressive and innovative company. Originally
More informationEnvironmentally Responsible Panel Manufacture
P.O. Box 726 Winder Georgia 30680 (770) 868-1423 Fax (770) 868-1325 www.atlantasunbelt.com Environmentally Responsible Panel Manufacture Sets a new benchmark in environmentally responsible panel manufacture.
More informationArched. Building an. Passageway. Although my company specializes in high-end jobs
Building an Arched Passageway All photos by Brian Striegler This straightforward approach combines basic shop methods with simple site joinery to create an elegant frame-and-panel archway by Gary Striegler
More informationSHADOWPLY INFORMATION GUIDE
SHADOWPLY INFORMATION GUIDE INTERIORS RANGE NOVEMBER 2018 www.shadowply.co.nz Information contained within is specific to Shadowply structural plywood products and must not be used with any other plywood
More informationUnlabeled Bulk Packed Products for OEM Accounts
Unlabeled Bulk Packed Products for OEM Accounts Poplar Wood Dowels and Squares: The poplar dowels and squares we produce are machined to exact size from kiln dried material. We strive to hold the dimensions
More informationMouldings and Panels.
Mouldings and Panels Listatalo Listatalo Ltd Listatalo Ltd, founded in 1978, is a company that manufactures mouldings and panels, specialising in wood surface treatment. Listatalo mouldings and panels
More informationSECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.
SECTION 06200 - FINISH CARPENTRY PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry:
More informationBeds may be put up or taken down quickly by use of a simple bolted connection at rails and uprights. MATERIALS LIST
CANPLY This design has been made both functional and attractive by use of pattern cut-outs in head and foot uprights, which serve as ladders. Since most children love to climb, getting them to bed will
More informationFramework joints FABRICATION - WOOD JOINTS. Corner joints. Tee joints. Worksheet 15a. Cable Educational Ltd
FABRICATION - WOOD JOINTS The word: fabricate means to join together. Most wooden products are held together with adhesive. Adhesive works very well when the edge of a piece of wood is being glued to the
More informationVENEERING AND LAMINATING SOLUTIONS
With over 35 years experience in the adhesives industry, Alansons have become known as a solutions provider, rather than a mere supplier of adhesive products. Nowhere is this fact better demonstrated than
More informationAC50 Enclosure - Thin Edge
AC50 Enclosure - Thin Edge 2 3/16??? 4 PL 11/16 1 7/8 Piping Groove 2 7/8 Top thickness = 18mm 6 7/16 All other pieces thick Corner Radii and joints =?? Bracing blocks for back = 5/8 square, 2 ea. Back
More informationTurning Penguin and Chick Ornaments
Turning Penguin and Chick Ornaments INTRODUCTION I was looking for a way to use turning, power carving and painting to make a Christmas Ornament. Penguins have become popularized by television, movies
More informationspecification guidelines installation guidelines wood-skin.com fold panels 1
specification guidelines installation guidelines wood-skin.com fold panels 1 Fold Panels are 3D panels with engaging geometries, built inside a rectangular module (available also an acoustic version).
More information3M Scotchgard Protector Graphic Film 8050
3M Scotchgard Protector Graphic Film 8050 Product Bulletin 8050 Release UK-C, January 2010 Product Description 3M Scotchgard Protector Graphic Film 8050 Kit comprises a dimensionally stable and custom
More informationBalustrade Systems / Installation Instructions
A. PARTS AND SUPPLIES NEEDED FOR INSTALLATION Hardware included for each 10 section of rail: 2 3 x 1-1/2 L-brackets 4 1-3/4 x 3/16 Blue hex-head screws for anchoring the L-brackets to the newel cap, column
More informationmachining and finishing
machining and finishing 1 S T E D I T I O N Brooks Bros machining and finishing operations offer its customers real added value. Like the savings they can make, the greater flexibility they have and the
More informationManufacturers of bespoke acoustic and decorative panels
Manufacturers of bespoke acoustic and decorative panels Modern solutions Traditional craftsmanship Carpintería Manuel Sierra S.L. is a family business with more than 30 years experience in the wood sector
More information3Insert the second rod no. 4
Yamato: Step-by-step 37 The stern block and searchlight control towers a b c d e f Recommended tools and materials Wood glue Sandpaper (no. 800 grain) Metal file Putty Craft knife For metal: Super Glue
More informationLEADING TECHNOLOGY SURPASSING QUALITY EMPOWERING DESIGN
LEADING TECHNOLOGY SURPASSING QUALITY EMPOWERING DESIGN WHAT IS WOOD POWDER COATING? Design Flexibilty + Durability + Environmentally Friendly Wood powder coating is a revolutionary technology in which
More informationA Unique Cutting Board
A Unique Cutting Board When I was asked to make a cutting board as a special gift, I wanted to do something new and eye-catching. Tired of squares and straight lines, I envisioned curving accents not shallow
More informationLOCKERS BEDS CABINETS WORKSHOP. Made in U.A.E.
LAB OFFICE TABLE DRAWERS CABINETS BEDS LOCKERS Made in U.A.E. WORKSHOP GENERAL INFORMATION Arfuf Alkhaleej Metal Industries Co. LLC is a metal furniture factory located in the United arab emirates.
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK. A. Section includes interior woodwork items indicated not specified elsewhere and as specified.
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes interior woodwork items indicated not specified elsewhere and as specified. B. Options: 1. Where casework
More informationThe Range: CENTRO SONAR FIRMUS INCLUSA ACCESSIO. Bespoke Architectural Doorsets.
The Range: CENTRO SONAR FIRMUS INCLUSA ACCESSIO Bespoke Architectural Doorsets. SELECT Doorsets A uniquely creative concept We have combined the best doorset manufacturing processes with our in-depth knowledge
More informationinstallation manual m y w a l l a r t. c o m
installation manual Step 1 Step 2 Acclimate panels for 48 hours in the environment and temperature they will be installed in. Step 3 Install over relatively smooth flat surfaces, all major holes or major
More informationSaws for cutting wood, aluminum metal and plastics
Saws for cutting wood, aluminum metal and plastics ISHAD saw blades are manufactured with the best raw materials available today. THE STEEL BODY: The high quality steel plate is manufactured with special
More informationAn Inner Hive Cover. In the Beekeeper s Work Shop. Building a Bee Hive: The Inner Hive Cover. by Stephen E. Tilmann
An Inner Hive Cover In the Beekeeper s Work Shop The project for this article is an inner hive cover. The inner cover sits on top of the topmost hive body (super) and underneath the telescoping top cover
More informationINSTALLATION INSTRUCTIONS FOR QUICK-STEP LAMINATE.
. PREPARATION. INSTALLATION. FINISHING. MAINTENANCE INSTALLATION INSTRUCTIONS FOR QUICK-STEP LAMINATE. IN ORDER TO OBTAIN A GOOD RESULT, WE ADVISE TO FOLLOW ALL GIVEN INSTRUCTIONS CAREFULLY. - 0-% RH 8h
More informationHow to Build a Recessed Medicine Cabinet
How to Build a Recessed Medicine Cabinet See post for install info http://www.hertoolbelt.com/recessed-medicine-cabinet/ Materials 6 Inset Cabinet Door Hinges 3 Latches 1 sheet Beadboard or 1/4 plywood
More informationHow to Make a Hat Bending Jig
How to Make a Hat Bending Jig MATERIALS One 2" x 8" x 11" long (Base Block) exact measurements are 7 ½" x 1 ½" x 11" (Pine is OK to use, I have used scrap Walnut for my benders) Four pieces of Oak 1" x
More informationPINE WOODS OAK METALS POLYMERS ASH SOFTWOODS CHIPBOARD MAHOGANY MAN MADE HARDWOOD WOODS MDF PLYWOOD BEECH HARDBOARD THERMOSET FERROUS METALS CARBON
ASH PINE MAHOGANY SOFTWOODS CHIPBOARD HARDWOOD MAN MADE WOODS OAK WOODS MDF PLYWOOD BEECH HARDBOARD RESISTANT METALS MATERIALS ALUMINIUM POLYMERS NON-FERROUS METALS UREA FORMALDEHYDE COPPER ZINC THERMOSET
More informationLinear Wood Grille Ceiling Systems
Linear Wood Grille Ceiling Systems Installation Manual Designed and Engineered by:decoustics www.decoustics.com sales@decoustics.com Linear Wood - Dowel Grille Note: Ceiling shown features a 3/4" (19mm)
More informationNOTE: Always consult your local and provincial codes
Appendix: ENGINEERED WOOD Plywood Specifications - How It s Made Plywood essentially is a panel of wood made from veneers, or thin sheets, layered in three or more layers, usually with each layer at right
More informationColour for every perspective. Coloured MDF
Colour for every perspective Coloured MDF Innovus Coloured MDF Innovus Coloured MDF: colour for every perspective The latest addition to the Innovus range of decorative products, Innovus Coloured MDF is
More informationA collection of impressive natural wood veneered acoustical finishes.
Decoustics Wood Decoustics Wood A collection of impressive natural wood veneered acoustical finishes. It is possible to specify natural wood veneered panels with exceptional acoustical performance. Ideal
More informationAccessories and workbenches
Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials
More informationTimber Flooring. Introduction
Timber Flooring Introduction Timber floors are suitable for use in a wide range of both commercial and domestic applications. The properties of timber offer qualities unlike any other material flexible
More informationSPECIFYING TIMBER TECHNICAL DATA SHEET ISSUED BY TIMBER QUEENSLAND RECOMMENDED PRACTICE // MARCH 2014
TECHNICAL DATA SHEET ISSUED BY TIMBER QUEENSLAND SPECIFYING TIMBER 15 RECOMMENDED PRACTICE // MARCH 2014 This data sheet provides guidance to designers, specifiers and builders on the specification of
More informationIMPORTANT NOTES ABOUT YOUR FLOORING PLEASE READ BEFORE INSTALLING INSTALLATION & MAINTENANCE FOR ENGINNERED HERRINGBONE
IMPORTANT NOTES ABOUT YOUR FLOORING PLEASE READ BEFORE INSTALLING INSTALLATION & MAINTENANCE FOR ENGINNERED HERRINGBONE ACCLIMATIZATION AND STORAGE Your new flooring has to be acclimatized before installation,
More informationA. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and type.
SECTION 062000 - FINISH CARPENTRY PART 1 - GENERAL 1.1 SECTION REQUIREMENTS A. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and
More informationCLASSIC RANGE PLUS RANGE CREATE RANGE - PHOTO WALL
CLASSIC RANGE PLUS RANGE CREATE RANGE - PHOTO WALL The following is an installation guide for fitting Multipanel CLASSIC RANGE, PLUS RANGE, CREATE RANGE AND PHOTO WALL Jig saw or Hand saw Measuring Tape
More informationROUTER BITS. Rabbeting Bits. Rabbeting Bits with Bearing Set Comes with interchangeable bearings to cut rabbets of different depths.
32-098 ROUTER BITS 42 32-504 Rabbeting Bits Produces super smooth cuts on both surfaces of the rabbet. Can be used for joining boards and for letting in back panels. Steel pilots can be removed from bits
More informationRobert Bosch GmbH. Wall organiser
Wall organiser The organisational talent Wall organiser Say goodbye to messiness! The wall organiser is the ideal place to store everything that tends to lie around. 1 Introduction Wardrobes, drawers and
More informationContact Tel/Fax:
Contact Email: info@gdg-plywood.com Tel/Fax:0086-22-24312818 Chapter Film Faced Plywood Film Wiremeshed Plywood Commercial Plywood Birch Plywood Poplar Plywood Pine Plywood Veneered Fancy Plywood UV Lacquered
More informationThe best of everything for your furniture. Chipboards. Panel components. Drawers. Flat-pack furniture
The best of everything for your furniture Chipboards Panel components Drawers Flat-pack furniture COMPANY PHILOSOPHY FORMAPLAN: THE SPECIALIST IN DIVERSITY formaplan, based in East Westphalia, employs
More information> Mirror Finish > Scratch Proof > Durable. HIGH GLOSS Laminated Panels VOLUME 1.
R > Mirror Finish > Scratch Proof > Durable HIGH GLOSS Laminated Panels 2018 - VOLUME 1 INTRODUCTION R Praveedh Décor Pvt. Ltd. is a manufacturer of premium prelaminated boards. All our products are recognized
More informationTechnical Data VARIABLES
Overview SYSTEM Rulon Linear Closed wood ceilings are designed with wood boards suspended parallel to the floor with lap joints and produces a 1/4 overlap between boards. The closed style gives an all-wood
More information