# 2204 PRINCETON STAIR BUNK SLATE - GREY

Size: px

Start display at page:

Download "# 2204 PRINCETON STAIR BUNK SLATE - GREY"

Jayson Collins
5 years ago
Views:

SFETY WRS # 0 PRCETO STR UK SLTE - REY. Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed.

1 SFETY WRS # 0 PRCETO STR UK SLTE - REY. Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed.. lways use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.. Surface of mattress must be at least inches (mm) below the upper edge of guardrails.. Do not allow children under years of age to use the upper bunk.. Prohibit more than one person on the upper bunk.. Periodicall, check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are tight.. Do not allow horseplay on or under the bed and prohibit jumping on the bed.. lways use the ladder for entering and leaving the upper bunk.. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.. Use of a nightlight may provide added safety precaution for a child using the upper bunk.. lways use guardrail on both long sides of the upper bunk. f bunk bed will be placed next to the wall, the guardrail the runs the full length of the bed should be place against the wall to prevent entrapment between the bed and wall.. The use of water or sleep flotation mattresses is prohibited.. Keep these instruction for future reference. STRULTO HZRD - ever attach or hang items to any part of the bunk bed that are not designed for use with the bed ; for example, but not limited to, hooks, belts and jump ropes. SZE OF MTTRESS D FOUDTO Use only mattress, foundation and desk combined which is - inches long and - inches wide on upper bunk. Ensure thickness of mattress and foundation combined does not exceed inches and mattress and is at least inches below edge of guardrails. Replacement parts, may be obtained from any Donco dealer or directly from us at the below address. DOCO TRD COMPY Fort Worth, Texas

2 # 0 PRCETO STR UK - SLTE REY Page / Princeton Section ssembly Hardware O. DESCRPTO Q'ty O. DESCRPTO Q'ty Furniture Screw (Ø/x0mm) pcs llen Key pc Furniture Screw (Ø/x0mm) pcs pcs Screw (Øx0mm) pcs Knob olt (Øxmm) pcs

3 # 0 PRCETO STR UK - SLTE REY Page / # # Outside Princeton Section Panel Upper unk Safety Rail PCS # # C nside Princeton Section Panel ox Upper Mattress Support Rail PCS # # Outside unk ed Section Panel # H Lower Mattress Support Rail PCS # nside unk ed Section Panel # M Princeton Section ack Panel ox ox C ox D Chest # L Slat Roll # D Small Step # E Large Step # F Vertical Support ar PCS # K SETS Top Rail PCS

4 # 0 PRCETO STR UK - SLTE REY Page / Place the handle in front of the drawer panel and insert the screw into the pre-drilled holes. Tighten it with screwdriver (not provided). K K

5 # 0 PRCETO STR UK - SLTE REY Page /. Open the Chest ox and position the Chest () with the Drawer Fronts opening either to the LEFT (Steps on the Left End of unk ed) or to the RHT (Steps on Right End of the unk ed).. Position the Outside Princeton Section Panel () so that the opening in the Panel is in Front of the Chest Drawer Fronts.. Slide the Outside Princeton Section Panel () up to and flush with the Front of the Chest (). lign the holes through the Outside Princeton Section Panel () with the holes in the edge of the Chest Top ( Top Step).. nsert - Furniture Screws () from the outside of the Panel () and into the Chest Top () and tighten by using the llen Key () provided.

6 # 0 PRCETO STR UK - SLTE REY Page / C C. Position the nside Princeton Section Panel (C) with the back side of the Chest (). C. Slide the nside Princeton Section Panel (C) up to and flush with the ack of the Chest (). lign the holes through the nside Princeton Section Panel (C) with the holes in the edge of the Chest Top ( Top Step).. nsert - Furniture Screws () from the outside of the Panel () and into the Chest Top () and tighten by using the llen Key () provided.

7 # 0 PRCETO STR UK - SLTE REY Page / M M C D D E E. Position the Princeton Section ack Panel (M) in-between the nside and Outside Princeton Section End Panels (&C). nsert - Furniture Screws () from the outside of both the nside and Outside Panels (&C) and into the ack Panel (M) and tighten by using the llen Key () provided.. Position the Small and Large Steps (D&E) in-between the nside and Outside Princeton Section End Panels (&C) and into the Small and Large Steps (D&E) and tighten by using the llen Key () provided. - OTE: The Large Step (E) is reversible and is notched on one front corner so that it can if around the Post in both Left and Right Princeton configurations.. Princeton Section is now Fully ssembled. M M C D E C D E

8 # 0 PRCETO STR UK - SLTE REY HRDWRE LST Page / O. DESCRPTO Q'ty O. DESCRPTO Q'ty Machine Screw (Ø/x0mm) pcs Machine Screw (Ø/xmm) pcs Half Moon (Ø/) pcs Female Half Moon (Ø/xmm) pcs Furniture Screw (Ø/x0mm) pcs Wood Dowel (Øx0mm) pcs Furniture Screw (Ø/x0mm) pcs Screw (Øx0mm) pcs Machine Screw (Ø/x0mm) pcs x. nsert Wooden Dowels () into the ends of all of the Upper ed safety Rails.. nsert Wooden Dowels () into the ends of all of the Upper & Lower Support Rails.

9 # 0 PRCETO STR UK - SLTE REY Page /. MPORTT: Make sure that the access opening for the upper unk ed on the nside unk ed Panel is toward the ack Side/ Wall Side of the ed, as you would face it when fully assembled. H H. lign the Wooden Dowels () in the end of the Lower Mattress Support Rails () with the holes in the Outside unk ed End Panel () and the nside unk ed End Panel (H).. nsert The Dowel () in the Lower Mattress Support Rails () into the hole in the nside End Panel (H).. nsert -" Half Moon" uts into the large holes on the inside of the Lower Mattress Support Rails ().. nsert - Machine Screws () into the holes on the outside of the End Panel (H) and into the Half Moon uts () in the Lower Mattress Support Rails ().. Tighten by using the llen Key () provided.. Repeat these steps for the other end of this Mattress Support Rail () and End Panel ().. Repeat these steps for the other Lower Mattress Support Rail () with both End Panels (&H).. Repeat all these steps for the Upper unk Mattress Support Rails (). H H

10 # 0 PRCETO STR UK - SLTE REY F Page / F F H H. lign the Wooden Dowels () in the end of the Upper unk Safety Rails () with the holes in the Outside unk ed End Panel () and the nside unk ed End Panel (H).. nsert the Wooden Dowel () in the Upper unk Safety Rails () into the hole in the nside End Panel (H).. nsert -Furniture Screws () into the hole on the outside of the End Panel (H) and into the end of the Safety Rail ().. Tighten by using the llen Key () provided.. Repeat these steps for the other end of this Upper unk Safety Rails () and End Panel ().. Repeat all these steps for the three other unk Safety Rails () with both End Panels (&H).. lign the - holes in the Vertical Support ar (F) with the holes in the Upper unk ed Mattress and Safety Rails (&).. nsert Machine Screw () through the Support ar and the ed / Safety Rail and into the Female Hex ut (). 0. Tighten with the llen Key () provided.. Repeat all steps with the other Support ar (F) on the opposite side of the Upper unk ed.

11 # 0 PRCETO STR UK - SLTE REY Page / ack side ack side. Place the Princeton Section in its preferred final location in the room.. lign the unk ed section with the Princeton Section.. Slide the unk ed nner End Panel up to and flush with the Princeton Section.. lign the -holes vertically along the Rear nside Panel Corner Posts (flushed together).. nsert Machine Screw () through the two posts and into the Female Hex ut ().. Tighten with the llen Key () provided.. Repeat all steps with the holes vertically along the Front nside Panel Corner Post (flushed together). ack side ack side. nstall the Slat Roll (L) in the Upper unk ed by rolling it out into position on the Support Cleat. 0. lign the outside edge of the first slat with the end of the Support Cleat on the nside of the Mattress Support Rail (). This aligns the first slat at the proper distance from the unk End Panel.. The outside edge of the last slat should be flush with the end of the Mattress Rail Support Cleat at the other end of the Mattress Rail as well.. nsert the Wood Screw () into the holes in the slats and tighten.. Repeat all steps for the Slat Roll (L) in the Lower unk ed.

12 # 0 PRCETO STR UK - SLTE REY Page / SDE - RL SLT ROLL

Assembly Instructions - Low Loft Stairs

Assembly Instructions - Low Loft Stairs ssembly Instructions - Low Loft Stairs Replacements Parts can be obtained from any uthorized olton Dealer www.boltonfurniture.biz Parts List NO. Drawing Description Qty. NO. Drawing Description Qty. 35mm