PRINCESS SINGLE BED WITH TRUNDLE
|
|
- Rosalind Chase
- 6 years ago
- Views:
Transcription
1 PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: Pacific Standard Time: 8:30 am - 4:30 pm Page # 1
2 Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A- Headboard (1) B-Footboard (1) C- Back Side Rail (1) CC- Front Side Rail (1) (Has wooden strip attached to inner bottom edge) D- Mattress Support Slats (1) E- Headboard Post (2) F- Headboard Finials (2) G- Drawer Front Panel (1) Page # 2
3 Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. GG- Drawer Back Panel (1) H- Drawer Side Panel (2) I- Drawer Divider Panel (1) J- Front / Back Drawer Bottom Panel (2) K- Middle Drawer Bottom Panel (1) L- Support Stretcher (2) M- 1/2 Bolt (26+1 extra) N- 1 Screw (44+2 extra) O- Knob (4) P- Knob Bolt (4) Q- Allen Wrench (1) R- HB/FB Support Cleat (2) S- 1 1/2 Bolt (6+1 extra) T- Wood Dowel (8+1extra) Tool Required: Phillips Screwdriver, Allen Wrench (provided) Page # 3
4 Assembly Instructions 1. Unpack the unit and confirm you have all the hardware and parts required. 2. Attach the HB/FB Support Cleat (Part R) to each bottom of the Headboard and Footboard (part A & B) with three 1 1/2 Bolts (part S) through the pre-drilled holes in the cleat into the threaded inserts attach to the Headboard/Footboard. See detail #1. 3. Pick up the Front Side Rail (part CC) and insert the metal hook into the slot of the post of the Headboard (part A). You need to insert the metal hook starting from the top and then push in and down until it locks in place. As shown in detail #2. NOTE: MAKE SURE THAT THE SOLID TRIM ATTACHED TO THE SIDE RAILS IS POINTING TOWARD THE INSIDE OF THE BED. 4. Repeat last step to attach the Back Side Rail (part C). 5. Follow steps 3 & 4 to attach the Footboard (part B). As shown in detail #2. Page # 4
5 6. Screw the Headboard Finials (part F) onto the Headboard Post (part E) then attach them to the Headboard (part A) by bolting into the threaded insert, as shown in detail #3. Assembly Instructions 7. Layout the Mattress Supports Slats (part D) into the slots in the Front and Back Side Rails (part C & CC), Make sure that every slot has a slat. As shown in detail #4. 8. Screw in each end of the slats using the 1 Screw (part N) through the pre-drilled holes in the slat, as shown in detail #4. Page # 5
6 Assembly Instructions 9. Align one Front/Back Bottom Panel (part J) with the Middle Bottom Panel (part K) and then at the other side the other Front/Back Bottom Panel (part J). Make sure that the Middle Bottom Panel (part K) is placed in a proper position as shown in detail # Before placing the Support Stretchers (part L) on top of the Bottom Panels, make sure that the 3 sections are snug and even, then proceed to screw with six 1 Screws (part N). See detail # Repeat with the other Support at the other side. Note: Do not tighten all bolts until all parts are assembled, this will make it easier to align the brackets with the insert nuts. 12. Install the Drawer Back Panel (part GG) by inserting the bottom of the Trundle into the groove of the Back Panel. Secure by screwing four 1/2 Bolts (part M) through the metal bracket and into the metal insert nut. Note: Do not tighten. See detail # 5A. 13. Pick up one Side Panel (part H) and insert two Wood Dowels (part T) at each end of the Side Panel. Proceed to secure the Side Panel (part H) to the Back Panel (part GG) with one 1/2" Bolt (part M). Use the Allen Wrench (part Q) to secure. Make sure that the two wooden dowels on the ends of the Side Panel are fully inserted into the holes of the Back Panel (part GG) See Detail # 5A. 14. Repeat step #14 to secure the other Drawer Side Panel (part H) at the other side. See detail #5A. 15. Install the Drawer Front Panel (part G) by inserting the base into the groove on the back of the Front Panel; make sure that the two wooden dowels on the ends of the Side Panels are fully inserted into the holes of the Drawer Front Panel (part G). See detail # Attach the Drawer Front Panel (part G) by screwing with the 1/2" Bolts (part M) through the bracket into the insert nut. Now fully tighten all bolts. See detail # With the help of two people lift the Drawer and turn it over. 18. Install the last four 1/2" Bolts (part M) in the upper corners of the Side Panels through the metal brackets and into the metal insert nut, in both Front and Back Panels. See detail # 6. Page # 6
7 Assembly Instructions 19. Attach the Drawer Divider Panel (part I) to the middle of the Drawer Front and Back Panel (part G & GG) with four 1/2 Bolts through the pre-attached L bracket into the threaded inserts, as shown in detail # Now attach the Knob (part O) the Drawer Front and Back Panel (part G & GG) with the Knob Bolt (part P) as shown in detail #6A. 21. Push the assembled Drawer Box in place as shown in detail #7. Your assembly should now be complete. Thank you for your purchase! Page # 7
O-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationWhalen Furniture Mfg. Inc. Factory No. 4 Page # 1
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale
More informationK-Emily Twin Nkl Canopy Bed K-Emily Twin Pink Canopy Bed K-Emily Purple Twin Canopy Bed
Parts and Hardware List A. Headboard 1 pc B. Footboard 1 pc C. Side Rails 2 pcs D. Support Slats 3 pcs E. Leg Supports 3 pcs F. Long Canopy Rails 2 pcs G. Short Canopy Rails 2 pcs H. Long Posts 2 pcs I.
More informationL.L.Bean. Wooden Slat Bed
L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step
More informationQueen Wingback Bed King Wingback Bed
Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock
More informationL.L.Bean. Platform Bed
L.L.Bean Platform Bed Thank you for purchasing our Platform Bed. Assembly of this product requires a Phillips head and a flat head screwdriver. We have found it helpful to have a second person present
More informationRiverside. Oakmont Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen
More informationRiverside. Windhaven Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard
More informationBLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9
BLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9 WARNING: Failure to follow these warnings and assembly instructions could result in serious injury.
More informationWhalen Furniture Mfg. Factory No. 5 Page # 1
If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have your instructions and parts list
More informationRiverside. Harbor Hill Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk
More informationRiverside. Harbor Hill King Storage Bed Assembly Instructions
King Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 6 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 2 pcs. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 25780 -- 6/0-6/6 Panel Headboard (NOTE: the 25785 Leather Headboard
More informationCopyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people
More informationTuscany 32" x 79" Open Bookcase
Tuscany 32" x 79" Open Bookcase ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
baby&child RESTORATION HARDWARE All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions
More informationMyra Bed Room King Storage Bed Assembly Instructions. Hardware and Parts packed with the Headboard. One Left & One Right H-C
email: Headboard Panel info@riverside-furniture.com King Storage Bed Hardware and Parts packed with the Headboard Headboard Post Headboard Stretcher Page 1 of 7 H-A One Left & One Right H-C M5/16"-18 x
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk
More informationBIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.
1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationBarnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationPantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth
88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great
More informationSide Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY
Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationINSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationGinger Twin Full Bunk Bed
N&D 0809 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.! SAFETY WARNING Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from
More informationLAGUNA BUNK BED - FULL OVER FULL INSTRUCTIONS
Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com All Restoration Hardware Bunk Beds are designed to meet
More informationhttps://www.wallbedsbywilding.com/wallbed-installation-studio-series/
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More information2 ADULTS REQUIRED FOR ASSEMBLING
2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your
More informationINSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationThis instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently.
This instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently. Don t be put off by the size of the instruction manual as the large diagrams
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationBeadboard Curved Bed Queen Size
Beadboard Curved Bed Queen Size PRE- ASSEMBLY: Remove all parts and hardware from the box, and lay them out on a carpeted or scratch-free work surface. The shipping box provides an ideal work surface,
More informationLoft Bed Safety Warning
Loft Bed Safety Warning * Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove the warning label from bed. * Always use the recommended size
More informationCirco Kids. >> assembly instructions E. Loft Bed (incl. solid pine slats) DPCI # (White) DPCI # (Chocolate)
Circo Kids Loft Bed (incl. solid pine slats) DPCI # 242-17 - 9390 (White) DPCI # 242-17 - 9391 (Chocolate) >> assembly instructions 92346 E 1 2 Congratulations on your latest Target purchase Don't start
More informationProduct Information. Brass & Cast Bedsteads
Product Information Brass & Cast Bedsteads parts CheCk list 4 0,4 6,5 0,6 0 slatted FraMe 01 headend 1 02 Footend 1 03 head end extension legs 2 04 side rails 2 05 end cross bar 2 06 Center cross bar 1
More informationM. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationPlease keep for future reference. Dimensions (5') Length cm. Width - 160cm Height cm
Sheridan Ottoman bed Assembly Instructions hygena Please keep for future reference 25/942 /659 56/4268 56/9 /7268 57/499 40/422 57/202 8/8846 Dimensions (4') Length - 202.5cm Width - 0cm Height - 84.5cm
More informationINSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationPLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS
Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using
More informationINSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationWILSHIRE BED. Bed Assembly Instructions. Page 1of 5. LIFESTYLE SOLUTIONS The Fusion Of Function And Comfort With Style
WILSHIRE BED Bed Assembly Instructions. Shorter Canopy Rail Left & Right Head Board Posts Longer Canopy Rail Head Board Panel Metal Pin Slat Support Left & Right Foot Board Posts Slats Foot Board Panel
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationSAFETY WARNINGS. RH23 Bed with Center Stretcher
SAFETY WARNINGS RH23 Bed with Center Stretcher RH23 beds are designed for nine different configurations. For safety, beds should be only configured in one of these nine styles and are not to be assembled
More informationWARNING: Read all instructions before assembling this product. KEEP INSTRUCTIONS FOR FUTURE USE
MARCELINE TWIN OVER TWIN BUNK BED INSTRUCTIONS Distributed in the U.S.A by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, California 91752 rhbabyandchild.com Distributed in Canada
More informationBridgeport All Wood Assembly Instructions STOP! Please read the following important information!
Revision 6/01/2004 Bridgeport All Wood Assembly Instructions STOP! Please read the following important information! For questions on assembly or parts, DO NOT RETURN product to the store. Contact the experts
More informationPLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS
Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using
More informationINSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD
For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationFor Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationPLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING
Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using
More informationHomestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s
88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationVince Ottoman Bed Frame
Vince Ottoman Bed Frame Assembly Instructions - Please keep for future reference 355/4845 330/7281 Dimensions Depth x Width x Height 213cm x 148cm x 111cm (Double) 223cm x 163cm x 111cm (King) Important
More informationHOMECREST STYLE SLING 3J300 Installation Instructions
1 HOMECREST STYLE SLING 3J300 Installation Instructions Before beginning, take careful note of how the chaise is assembled, particularly the adjustment hardware. An additional set of hands to help during
More informationTwin Twin Oak Bunk Bed Assembly Instructions
Twin Twin Oak Bunk Bed Assembly Instructions -Use Only standard Twin size mattress (75 long x 39 wide)- -Maximum mattress thickness must not exceed 8 - -Surface of mattress must be at least 5 below the
More informationInstruction Manual & User Guide
Toddler Bed with Drawer IMPORTANT: RETAIN FOR FUTURE REFERENCE. An IGC Dorel brand Please read this manual in its entirety before assembling the product and follow all instructions contained herein. Do
More informationWILDING WALLBEDS INSTALLATION INSTRUCTION Side Mount
WILDING WALLBEDS INSTALLATION INSTRUCTION Side Mount For Wallbed models: Do-It-Yourself Insturction booklet C92 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE
More informationM10 x 75mm Sockethead Cap Screws. 5mm Fender Washer (12) Included - (8) Required. #10 x 2.5" PH Wood Screws. (30) Included - (24) Required
Door System Unit - Hardware Tools Included: (2) 2mm Allen Wrenches, (2) 3mm Allen Wrenches, (2) 4mm Allen Wrenches, (2) 6mm Allen Wrenches, and (1) 8mm T-Handle Allen Wrench Tools Required: Phillips Screwdriver,
More informationAssembly Sheet Café Loft - Mission or Cooley Style
ssembly Sheet afé Loft - ission or ooley Style Replacement parts can be obtained from any olton Furniture authorized dealer. . Drawing Description ty.. Drawing Description ty. Footboards 2 80mm Hex olt
More informationAssembling Insert NO. ITEM DESCRIPTION QTY. CALLUM 6-DRAWER TWIN/FULL STORAGE CANOPY BED. Long Bolt 5/16 x 2-1/4 20 pcs. 20 pcs.
CALLUM 6-RAWER TWIN/FULL STORAGE CANOPY BE PARTS INCLUE: A [1] HEABOAR PANEL B [2] HEABOAR POSTS C [2] FOOTBOAR POSTS [2] SIE RAWER FRAME E [2] SHORT SIE RAILS F [2] STORAGE BASE G [1] SLAT ROLL H [8]
More informationA. Top Unit 1 Pc. For assembly see instructions in carton:
88 5005 9441 Kitchen Island IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationL.L.Bean. Farmhouse Futon
L.L.Bean Farmhouse Futon Thank you for purchasing our Farmhouse Futon. Assembly of this product requires a Phillips Head Screwdriver and Flat Head Screwdriver. We have found it helpful to have a second
More informationmila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
More informationKEATING BED. Date: 02-Apr-15 Page 1 of 7 Rev:
KEATING E ate: 02-Apr-5 www.williams-sonoma.com Page of 7 Important Safety Instructions: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is strongly
More informationColonial Classic Bar
88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationWellington Wallbed 700 Series Assembly Instructions
Wellington Wallbed 700 Series Assembly Instructions 1. Read all instructions before proceeding. Not following instructions may result in personal harm or damage to the furniture. 2. 2 people are required
More informationFor assembly see instructions in carton
88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have
More informationNantucket Buffet
88 5022 611 Nantucket Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We
More informationStrata. urniture. Mission Rim Instructions. Parts in the Arm Box: Parts in the Body Box:
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached
More informationPantry IMPORTANT NOTE
88 5022 69 Pantry IPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great
More informationBunk Bed Assembly Instructions
1415-9 Bunk Bed Assembly Instructions -Use Only standard Twin size mattress (75 long x 39 wide)- -Maximum mattress thickness must not exceed 8 - -Surface of mattress must be at least 5 below the upper
More informationWARNING: Failure to follow these warnings and assembly instructions could
OXFORD BUNK BED TWIN OVER TWIN & FULL OVER FULL For Bunk Bed Twin Over Twin WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To help prevent
More informationInstalling the Profile Privacy Panel. Assemble top mounting bracket. Prerequisites. Tools
Installing the Profile Privacy Panel Complete these instructions to install the Profile Privacy Panel. Privacy panels are available in various heights to match tiers and include mounting hardware for slat
More informationIMPORTANT:
ASSEMBLY INSTRUCTIONS FOR KARISMA TWIN & FULL SIZE BEDS AND CONVERTIBLE CRIBS FULL SIZE BED OPTION (PLEASE REFER TO ASSEMBLY INSTRUCTIONS FOR YOUR 550 CONVERTIBLE CRIBS ) 555 5532 5530 5537 IMPORTANT:
More informationADULT ASSEMBLY REQUIRED
ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if you are missing parts, do not return this item to the Retailer Store Please call our customer service number and have your instructions
More informationCATALINA BUNK BED TWIN OVER TWIN
pottery barn kids ATALINA BUNK BED TWIN OVER TWIN ASSEMBLY INSTRUTIONS www.potterybarnkids.com Date: 2011 July-23 Page 1 of 8 WARNING: Failure to follow these warnings and assembly instructions could serious
More informationI Ledge. Groove. Safety rail holes. Groove. Slot III VII
I Ledge IV V A C Groove Safety rail holes ) To assemble McKenzie Loft, attach head board A and footboard to loft side rails. The rails C D used on upper loft have four pre-drilled holes on the side of
More informationNest Storage Bed in Fabric Designed by Niels Bendtsen
General Assembly Instructions Assembly requires two people and 1 2 hours. Assemble bed as near as possible to final resting area. Identify all parts and hardware before beginning assembly. Retain packaging
More informationTYGER GUARD. Parts List BEFORE INSTALLATION WARNING TG-GD6D /7. Tyger Guard. Tube Brackets (Bull Bar) passenger or driver side
TYGER GUARD TM BEFORE INSTALLATION TG-GD6D60068 READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS RECOMMENDED. CUTTING IS
More informationBarnwood Bunk Bed Assembly Instructions
Barnwood Bunk Bed Assembly Instructions Parts needed: 1 1 2 1 8 4 10 1 10 16 1 - Tools Needed for Assembly: Cordless Drill with Phillips Head Ratchet w/9/16 socket 9/16 Wrench T-25 Bit Headboard Footboard
More informationBrooklyn Drawers Assembly Instructions
rooklyn rawers ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. locking nut x30 long screw dowel bolt x16 x46 x30 F G H W Safety Strap X Wall
More informationBraxton 7-pc Dining Set (Chair) Model # BRA7PD-E
LOT NUMBER: DATE PURCHASED: / / Braxton 7-pc Dining Set (Chair) ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where
More informationINSTRUCTION BOOKLET #C20
INSTRUCTION BOOKLET #C0 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT IN SEVERE PERSONAL INJURY TO
More informationUSE STRAIGHT ALLEN WRENCH (Bz) WITH AN ELECTRIC SCREWDRIVER TO TIGHTEN SCREWS - NOTE: DO NOT OVER TIGHTEN
ASSEMBLY INSTRUCTIONS (VK) MODEL NO. 836-944P1 Made in Vietnam Thank you for purchasing this Powell product. We want to make sure it is complete and to your satisfaction. Please check all packing material
More informationJesse Entertainment Unit Assembly Instructions
esse ntertainment Unit ssembly nstructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt x32 dowel x16 D F small screw x16 L + R L + R locking nut x32 cam
More informationPLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING
SleepSafe Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included
More informationpottery barn kids MADISON CABINET HUTCH
pottery barn kids MADISON CABINET HUTCH IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two adults is recommended. PRE-ASSEMBLY: Remove
More informationBEADBOARD LOFT BED ASSEMBLY INSTRUCTIONS
BEADBOARD LOFT BED ASSEMBLY INSTRCTIONS Date: 2013-Apr.-25 www.pbteen.com Page 1 of 10 ARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To prevent
More informationSamford Contemporary Computer Desk Model # JCS AD
LOT NUMBER: DATE PURCHASED: / / Samford Contemporary Computer Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More informationBrooklyn Change Table & Drawer Set Assembly Instructions
Brooklyn Change Table & rawer Set ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. B C 12 mm x20 L + R L + R x28 W Safety Strap X Wall Screw
More informationIDR assembly instructions:
IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)
More informationAddison Panel Beds DUET = Natural finish Assembly Instructions
Addison Panel Beds DUET = Natural finish Model # 2006DUET Addison Full Panel Bed 2010DUET Addison Queen Panel Bed 2013DUET Addison King Panel Bed 2015DUET Addison Cal-King Panel Bed IMPORTANT NOTES: For
More informationB Footboard 1. C Headboard Foot 2. D Side Rail 2. E Cross Slat 4. G Support Beam 1. H Cross Slat Support Foot 3. I Finial 4. J Adjustable Leveller 3
B Footboard 1 C Headboard Foot 2 D Side Rail 2 E Cross Slat 4 F Cross Slat for Support Beam (with mounting position) 3 G Support Beam 1 H Cross Slat Support Foot 3 I Finial 4 J Adjustable Leveller 3 Page
More informationADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return this item to the Sam s Wholesale
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500 PART # /502795
(W) INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 502794/502795 PARTS LIST: 1 Grille Guard 2 12-1.75mm x 140mm Hex Bolts 2 Frame Mounting Brackets 8 12-1.75mm x 30mm Hex Bolts 2 Lower Support Brackets
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationAVA REGENCY BUNK BED TWIN OVER FULL
pottery barn kids AVA REGENCY BUNK BED TWIN OVER FULL www.potterybarnkids.com Date: 2016-Feb.-18 Page 1 of 14 WARNING: Failure to follow these warnings and assembly instructions could result in serious
More informationAssembly Instructions COMO Double Bed
Assembly Instructions COMO Double Bed VER 1.2 WARNING NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY 2 Read Instructions carefully. Check no parts are missing.
More informationD. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T.
itchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care
More information