OL 90 N, OL 95 and OL 100

Transcription

1 Slimline fanlight openers OL 90 N, OL 95 and OL 100 Herzzentrum Bad Krozingen

2 Contents Slimline fanlight opener OL 9o N Corner operating gear Fz 90 Vertical gear Fz 91 Gear Fz 92 Slimline fanlight opener OL 95 Slimline fanlight opener OL 100 Corner operating gear Fz 100 Vertical gear Fz 101 Gripping and cleaning scissor GEZE FPS Page SLIMLINE FANLIGHT OPENER 2

3 OL 90 N Slimline fanlight opener OL 90 N with hand lever fitting for rectangular windows Units: 1 slimline scissor 1 scissor stay base 1 back plate 1 casement bracket 1 corner transmission 1 cover cap 1 hand lever 2 rod guides plus: rods and cover profiles With inward or outward opening bottom hung casements, safety scissors which restrict the travel of the casement when the scissor is disengaged must be attached in addition to the fanlight fitting. (See GEZE FPS gripping and cleaning scissor) Drawing: Product features Easy fitting even with deep window reveals since scissor stays and linkage can be fitted from front Large opening width: 170 mm All visible parts in light alloy All fixing screws concealed Minimal clearance above and to the side of the casement required Universal casement bracket suits all materials Locking mechanism in scissor stay Easily adjustable latching force setting with automatic compensation of frame inaccuracies Fixed casement joint without sliding parts Rod connectors unaffected by tolerance restrictions Release button indicates whether casement is properly engaged All units pre-assembled, which means fewer fittings Drilling template ensures quick and accurate fitting Excellent design Full opening width possible with all casement heights 3

4 Range of Application Only for vertically mounted inward opening, top hung, bottom hung or side hung casements made of timber, UPVC, or light alloy with overlap depths of 0-25 mm. Max. casement weight 80 kg Casement Max. casement width a weight Min. 380 mm Max mm with 1 scissor 30 kg/m 2 Max mm with 2 scissors 30 kg/m 2 Max mm with 3 scissors 25 kg/m 2 D-dimensions and space requirement (mm) Casement Upper space Fitting dimenheight requirement -y sion D (min.) D D D D Distance from centre of gravity to casement pivot point of hinge: i=10 to 60 mm Aluminium with overlap Aluminium, flush UPVC Timber, Euro nut 4

5 Slimline fanlight opener OL 90 N with hand lever Basic fitting for angled windows comprising: 1 slimline scissor 1 scissor stay base 1 back plate for angled window 1 casement bracket for angled windows 1 bendable corner transmission 1 hand lever 2 rod guides plus: rods and cover profiles Product features as for rectangular windows. Drawing: Range of Application Only for vertically mounted inward opening, top hung, bottom hung or side hung casements made of timber, PVCu, or light alloy with overlap depths of 0-25 mm. Max. casement weight 80 kg Max. total weight 30 kg/m 2 Window shapes and permissible dimensions depend on inclination angle α (bending angle of corner transmission) Max. length of angled leg P = 2000 mm //////////// Border line (avoid if possible) triangular windows > α b min. a min. a1 min. bis / / / / / / / / / / / / / / / / / / / Opening width b2=average casement height Distance from centre of gravity to casement pivot point of hinge: i=10 to 60 mm 5

6 D-dimension and space requirement Fitting dimension D top without supplementary locking device mm top with supplementary locking device 16 mm side min. 10 mm Space requirement top and side: D +9 mm Aluminium, flush Aluminium with overlap UPVC Timber, Euro nut Fitting arrangements and minimum dimensions α = β = A : Hand lever - Corner transmission - Scissor B : Hand lever - Corner transmission - Scissor - Locking device C : Hand lever - Corner transmission - Scissor - Corner transmission - Locking device D : Hand lever - Corner transmission - Locking device - Scissor - Locking device E : Hand lever - Locking device - Corner transmission - Scissor - Corner transmission - Locking device F : Hand lever - Corner transmission - Locking device - Scissor - Corner transmission - Locking device G : Hand lever - Locking device - Corner transmission - Locking device - Scissor - Corner transmission - Locking device - Locking device 6

7 Description Finish ID No. GEZE OL 90 N Hand lever and corner angle GEZE OL 90 N scissor with casement bracket Rod ø 8 mm Cover profile 2000 mm Mitred ends Cover profile 3000 mm Mitred ends Cover profile 6000 mm Straight ends GEZE OL 90 N Hand lever and corner transmission (fixpack 25) GEZE OL 90 N scissor with casement bracket (fixpack 25) Basic fitting GEZE OL 90 N with hand lever for angled windows GEZE OL 90 N scissor without casement bracket GEZE OL 90 N sliding casement bracket for angled windows GEZE OL 90 N casement bracket for timber windows, Euro nut GEZE OL 90 N sliding casement bracket for timber angled windows, Euro nut Rod guide Rod guide with fixing plate Rod connector for rod ø 8 mm Corner transmission Corner transmission cover Corner transmission, bendable Hand lever OL 90 N Fixing plate for hand lever Drilling template for timber Drilling template for metal and PVCu Accessories for multi-part drilling template Supplementary drilling template F 45 Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL mm Galvanised mm Galvanised mm Galvanised Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL Mill aluminium Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze White, RAL White, RAL UPVC Galvanised Dark bronze Galvanised Galvanised Anodised aluminium Dark bronze White, RAL White, RAL Galvanised Anodised aluminium Dark bronze White, RAL White, RAL Galvanised Yellow Blue OL 90 N 7

8 OL 90 N Corner transmission gear Fz 90 Corner transmission gear Fz 90 Corner transmission with integrated gear. For fixed and detachable cranking handle. Fz 90 L - left Fz 90 R - right (see illustration) Finish: galvanised or black. Product features Slim design (16 mm) Fully concealed by profile High load carrying capacity On request: Adjustable anti-overload device (ex-factory default setting 7 Nm) Min. casement width 380 mm Only 9 crank revolutions for full opening width Simple fixing Drive rod, ø 8 mm, can be directly attached Stroke 54 mm (Stroke limiting possible) Opening width approx. 170 mm Drawing: Range of Application Only for vertically mounted inward opening, top hung, bottom hung or side hung casements made of timber, PVCu, or light alloy. a = Total casement width 380 to 3600 mm b = Casement height min. 250 mm Casement weight max. 80 kg Max. panel weight: Casement width a Total weight 380 to 2400 mm Max. 30 kg/m to 3600 mm Max. 25 kg/m 2 i = Distance from centre of gravity to casement pivot point of hinge: 10 to 60 mm Ü = Overlap depth 0 to 25 mm D = Outer edge of casement to middle of drive rod (see table) X = Space requirement at side (see table) Y = Space requirement at top (see table) Casement D-dimension, Space requireheight b top ment Y, top 250 to 300 mm 16 to 18 mm D + 9 mm 300 to 400 mm 14 to 18 mm D + 9 mm 400 to 500 mm 12 to 18 mm D + 9 mm from 500 mm 10 to 18 mm D + 9 mm Distance Centre of gravity of casement Linkage D-dimension Space requirement X, side Gear Fz 90 L/R and Fz 91 with fixed cranking handle Min. 10 mm D + 9 mm detachable cranking handle Min. 14 mm D +14 mm 8

9 OL 90 N Vertical gear Fz 91 Vertical gear Fz 91 For fixed and detachable cranking handles. For use on left and right. Finish: galvanised or black. Product features Narrow design (16 mm) Fully concealed by profile High load carrying capacity On request: Adjustable anti-overload device (ex-factory default setting 7 Nm) Min. casement width 380 mm Only 9 crank revolutions for full opening width Simple fixing Drive rod, ø 8 mm, can be directly attached Stroke 54 mm (Stroke limiting possible) Opening width approx. 170 mm For angled windows with bendable transmission Drawing: (angled window) (rectangular window) (with supplementary locking device) Range of Application Only for vertically mounted inward opening, top hung, bottom hung or side hung casements made of timber, PVCu, or light alloy with overlap depths of 0.25 mm a = Total casement width 380 to 3600 mm b = Casement height min. 250 mm Casement weight max. 80 kg Max. panel weight: Casement width a Total weight 380 to 2400 mm Max. 30 kg/m to 3600 mm Max. 25 kg/m 2 i = Distance from centre of gravity to casement pivot point of hinge: 10 to 60 mm Ü = Overlap depth 0 to 25 mm D = Outer edge of casement to middle of drive rod (see table) X = Space requirement at side (see table) Y = Space requirement at top (see table) Casement D-dimension, Space requireheight b top ment Y, top 250 to 300 mm 16 to 18 mm D + 9 mm 300 to 400 mm 14 to 18 mm D + 9 mm 400 to 500 mm 12 to 18 mm D + 9 mm from 500 mm 10 to 18 mm D + 9 mm Linkage D-dimension Space requirement X, side Gear Fz 90 L/R and Fz 91 with fixed cranking handle Min. 10 mm D + 9 mm detachable cranking handle Min. 14 mm D +14 mm Distance Centre of gravity of casement 9

10 OL 90 N Gear Fz 92 Gear Fz 92 For angled windows and triangular windows. Also for use as horizontal gear with rectangular windows. For fixed and detachable connection rod. For use on left and right. Finish: silver-colour/white or dark bronze. Angled window Triangular window Product features Narrow design High load-carrying capacity On request: Adjustable anti-overload device (ex-factory default setting 7 Nm) Simple fixing Stroke 54 mm (Stroke limiting possible) Opening width approx. 170 mm Drawing: Attention: - The gear hole pattern should be drilled using the drilling template Description ID No. Drilling template Wood Fz 92 Alu/UPVC An supplementary locking device is recommended if P = 1200 mm - Only one scissor with sliding casement bracket may be mounted to the angled window min mm Range of Application - Only for vertically installed rectangular windows α = Linkage angle 90 to 160 a = Total casement width 380 to 2000 mm b = Casement height min. 250 mm Casement weight max. 80 kg max. total weight: Casement width a Total weight 380 to 2000 mm Max. 30 kg/m 2 P = Length of angled leg b2 = Average casement height = min. 300 mm i = Distance from centre of gravity to casement pivot point of hinge: 10 to 60 mm Ü = Overlap depth 0 to 25 mm D = Outer edge of casement to middle of drive rod X = Space requirement at side: D +9 mm With detachable cranking handle: D +14 mm Y = Space requirement at top: D +9 mm Distance Centre of gravity of casement 10

11 OL 90 N / OL 100 Linkage bearing for gear and connecting rods Linkage transmission with connecting rod Fixed or detachable cranking handle Drawing: The linkage bearing is a flexible steel bracket with galvanised or black finish and can be adjusted to various angles. It can be fitted on top of the reveal, vertically in front of the reveal, or laterally on the reveal. The connecting rod is then located 25 mm from the wall. 24 min. 1,2xe 40 max. Lagerlänge 1400 mm Fixed cranking handle 345 Detachable cranking handle Fixed cranking handle Detachable cranking handle 11

12 OL 90 N / Gear Description Finish ID No. left Galvanised Black right Galvanised Black GEZE Fz 91, gear with accessories Galvanised for vertical mounting Black GEZE Fz 91, gear with corner transmission Galvanised Black Silver-colour/white Dark bronze Anodised alumin Fixed cranking handle, with collapsable handle with Dark bronze cranking handle holder (extended length 1400 mm) White, RAL White, RAL Anodised alumin Detachable cranking handle, with collapsible handle Dark bronze with coupling bell-socket (extended length 1400 mm) White, RAL White, RAL Linkage bearing with bearing plate, for gear Galvanised Fz 90-Fz 92 and Fz 100-Fz 101, for cranking handle Black Anodised alumin Connecting tube, outer diameter 15 mm, Dark bronze stock length 6000 mm White, RAL White, RAL Silver-colour Collapsible handle Fz 45/32 Brown White Universal joint Fz45/14 Silver-colour Dark bronze Roll pin 4x16 mm Galvanised Silver-colour Cranking handle holder Fz 45/8 Brown White Stroke limiter for opening width 100 mm Drilling remplate for connecting tube Silver-colour On request: coated anti-overload device Dark bronze White, RAL White, RAL See standard version for rods and cover profiles and, where required, supplementary scissors. 12

13 Swivelling hand lever Description Finish ID No. Anodised alumin Accessories for hand lever Dark bronze OL 90 N swivelling White, RAL White, RAL GEZE OL 90 N scissor with anti-unhinge feature Description Finish ID No. Anodised alumin Scissor with anti-unhinge Dark bronze feature (with casement bracket) White, RAL White, RAL GEZE OL 90 N lockable scissor Description Finish ID No. Anodised alumin Lockable scissor Dark bronze (with casement bracket) White, RAL White, RAL Supplementary locking device Description Finish ID No. Anodised alumin Supplementary locking device Dark bronze Overlap depth 0-17 mm White, RAL White, RAL Anodised alumin Supplementary locking device Dark bronze Overlap depth mm White, RAL White, RAL Supplementary corner transmission (ID No ) if used on opposite side to hand lever Drawing: With supplementary angle (overlap depth up to 17 mm Without supplementary angle (overlap depth over mm 13

14 Triangular windows with 2 scissors Operated using hand lever, gear, or motor Description Finish ID No. Anodised alum GEZE OL 90 N scissor Dark bronze without casement bracket White, RAL White, RAL Anodised alum GEZE OL 90 N sliding Dark bronze casement bracket White, RAL White, RAL Bendable corner transmission Galvanised Stacked bottom hung casements with corner angle transmission Description Finish ID No. Anodised aluminium Transmission for corner Dark bronze angle or hinge White, RAL White, RAL Casement width max mm Casement width max mm (Length of base line) Drawing: The transmission is situated in front of the corner transmission so that no excessive space requirements exists to the side (sketch is only intended as a guide representation). Drawing: Central operation for double casement window with corner transmission Description Finish ID No. Anodised aluminium Transmission for corner Dark bronze angle or hinge White, RAL White, RAL End cap Black white, RAL Drawing: x = 20 mm (with motor 36 mm) The transmission is situated in front of the corner transmission so that no excessive space requirements exists to the side (sketch is only intended as a guide representation). Bell-type angle transmission as per Fig. 50 for reveal depths e = mm, detail A Rod 10 ø, stock length 2000 mm ID No.: Transmission with cranked rod 10 ø as per Fig. 10 for reveal depths up to approx. 150 mm, detail B Description Finish ID No. Bell-type angle transmission Galvanised Fig. 50 Dark bronze Additional packing for Galvanised bell-type angle transmission Dark bronze Additional packing for angled rod 10 ø Galvanised Detail A Detail B 14

15 With flexible link arm for vertically installed tilt casements (inward) as semi-arched and segmental-arch windows Semi-arched windows Semi-arched windows (angle greater than 150 ) Casement width a = ( ) mm Casement height b = min. 300 (600) mm Casement weight = max. 80 kg Panel weight = max. 30 kg/m 2 Distance from gravity centre of casement to pivot point of hinge i = mm Overlap depth = 0-22 (0-25) mm Space requirement at top Y = see diagram 1 Space requirement at side X = D-dimension at side +10 mm Mounting dimension D = see table 1 Table 1 Casement D-dimen- D-dimenheight b sion, top sion, side mm 12 mm from 400 mm mm min. 10 mm Segmental-arch windows Segmental-arch windows (angle less than 150 ) Casement width a = ( ) mm Casement height b = min. 250 (600) mm Casement weight = max. 80 kg Panel weight = max. 30 kg/m 2 Distance from gravity centre of casement to pivot point of hinge i = mm Overlap depth = 0-22 (0-25) mm Space requirement at top Y = see diagram 1 Space requirement at side X = Y Mounting dimension D = see table 2 Semi-arch Upper edge of holder LZ=CH-182 LZ=CH CH (min.311) CH (min.311) Ds x Lower edge of hand lever base plate Semi-arch Upper edge of holder Ds x Lower edge of hand lever base plate Table 2 Casement D-dimension,top height b mm 16 mm mm mm from 400 mm mm ( ) = For 2 scissor version 65 Drawing: (1 scissor) (2 scissors) Do a= mm a= a= mm Arch height b2 b2 b1 b2 b1 b b Segmental arch Upper edge of holder Diagram 1 Space requirement, top y Casement Flügelbreite width a a LZ=CH-182 LZ=CH-182 CH (min.311) CH (min.311) Ds x Lower edge of hand lever base plate x Y Ds Y < Do a= mm Segmental arch Upper edge of holder Lower edge of hand lever base plate <150 Semi-arched window a= mm Segmental-arch window b1 b2 b b1 b2 b GEZE OL 90 N 15

16 OL 90 N 1-scissor 2-scissor Description Finish ID No. ID No. Anodised aluminium GEZE OL 90 N Dark bronze Hand lever White, RAL White, RAL Anodised aluminium GEZE OL 90 N Dark bronze Scissor without casement bracket White, RAL White, RAL Anodised aluminium GEZE OL 90 N Dark bronze Casement bracket for timber White, RAL windows with Euro slot White, RAL Anodised aluminium GEZE OL 90 N Dark bronze Sliding casement bracket for White, RAL timber windows with Euro slot White, RAL Grey Flexible linkage without Brown accessories, length 700 mm White, RAL Grey Flexible linkage without Brown accessories, length 1000 mm White, RAL Grey Flexible linkage without Brown accessories, length 1250 mm White, RAL Grey Accessories for flexible linkage Brown (Special window shapes) White, RAL Corner guide for flexible linkage Grey with angled or segmental- Brown arch windows White, RAL Grey Guide for flexible linkage Brown White, RAL See standard version for rods, rod guides, and cover profiles 16

17 GEZE flexible linkage for negotiating sills For OL 90 N only Max. casement width 1200 mm Max. total weight 30 kg/m 2 Product features Simple adaptable transmission No bell-type angles No rod angles Fast and easy mounting Optically elegant quide Without guide With guide Possible routing arrangements ➀ Sill with reveal depth e = up to 310 mm (Linkage length 700 mm) ➁ Sill with reveal depth e = over 310 mm (Linkage length 700 mm up to e = 380 mm) (Linkage length 1000 mm up to e = 680 mm) 3 Sill with sill projection (Linkage length 700 mm up to e+e1 = 310 mm) (Linkage length 1000 mm up to e+e1 = 610 mm) ➃ Angled sill (Linkage length 700 mm up to e = 380 mm) (Linkage length 1000 mm up to e = 680 mm) Centre of horizontal drive rod to upper edge of sill min. 410 mm Bottom edge of upper holder to upper edge of sill min. 160 mm Package/finish Flexible linkage in 2 lengths according to sill depth Accessories comprising: holder, retaining spring, clamping element, guide, rod coupling, and fixing plates Finish: grey, brown, or white (max. 40 mm) Description Finish ID Nr. Flexible link arm without accessories Accessories for flexible link arm with coping transmission (max. 120 mm) Linkage length 700 mm dark bronze EV1 and white RAL Linkage length 1000 mm dark bronze EV1 and white RAL Linkage length 1250 mm dark bronze EV1 and white RAL dark bronze EV1 and white RAL

18 Curtain walling 1. Flexible linkage arm Rectangular windows in curtain wall Casement width a = min. 600 mm Casement height b = min. 250 mm Casement weight = max. 80 kg Panel weight = max. 30 kg/m 2 Distance from centre of gravity to casement pivot point of hinge: i = 10 to 60 mm Overlap depth = 0 to 25 mm See drawing Provided by customer Provided by customer With flush-to-surface rail With 0-50 mm rail projection 2. Transmission with pull handle Post projection is bridged by a linkage bracket (see illustration). Operation with hand lever gear Fz 91 electric motor See drawing Description Finish ID No. Anodised aluminium Size Curtain wall transmission Dark bronze Size size 75, T=0-75 mm White, RAL 9010 Size White, RAL 9016 Size Anodised aluminium Size Curtain wall transmission Dark bronze Size size 150, T=0-150 mm White, RAL 9010 Size White, RAL 9016 Size

19 OL 90 N for top-hung windows (outward) Product features Easy installation even with deep reveals since scissors can be mounted from above and drive rods from front Large opening width of approx. 170 mm All visible parts made of light alloy, drive rods made of steel, galvanised Fixing screws of scissors, supplementary angle, corner angle, and hand lever are concealed Low space requirement at bottom and side of casement All current available profiles can be mounted using one back plate Locking device in scissor Simple pressure adjustment for automatic correction of stop inaccuracies Fixed casement guide rod without sliding parts Tolerance-insensitive clamp connections of link arm With release button. It shows whether casement is correctly mounted Completely pre-assembled units, which means fewer fittings Drilling template ensures timesaving, precise fitting Excellent design Applications for windows with hand lever For timber, PVCu and aluminium windows For vertically installed top-hung windows (outward), for use on left and right Reveal depth: 0 (flush to surface) to 73 mm Clearance frame height a = mm (1 scissor) b = mm (2 scissors) Clearance frame height b = min. 370 mm Inner edge of casement to pivot point of casement max. 70 mm Casement weight max. 80 kg, if total weight is max. 30 kg/m 2 Distance i = mm (Centre of gravity of casement to pivot point) Package Standard fitting OL 90 N, with additional casement plate, with supplementary scissor angle in 2 designs depending on reveal depth, with additional angled rod in 2 designs depending on reveal depth. 19

20 OL 90 N for top-hung windows (outward) Standard installation y = Space requirement at bottom of frame without supplementary angle without holder: 23 mm with holder: 28 mm with supplementary angle: 33 mm x = Space requirement at side of frame Transmission side: D+8 mm Frame With vertical gears and the electric drives, the space requred to the side will be correspondingly greater. Supplementary angle Holder Corner transmission Fixing casement and frame parts according to reveal depth 1 Casement plate 2 Casement bracket 3 Scissor stay bracket 4 Supplementary angle 5 Back plate 6 Scissor stay base 7 Slimline scissor stay Attachment Aluminium windows: Countersunk self-tapping screws 4.2 mm or countersunk screws M5 with countersunk head rivet nut Timber windows: Countersunk wood screws 4 x 35 mm UPVC windows: Countersunk self-tapping screws 4.2 mm Drawing: Aluminium window Reveal depth e = 0 (flush to surface) - 30 mm (Additional pack 0-30 mm) Timber windows Reveal depth e = mm (Additional pack mm) Timber windows Reveal depth e = mm (Additional pack mm) Description Finish ID No. Anodised aluminium GEZE OL 90 N Hand lever and corner angle Dark bronze White, RAL ➀ White, RAL Anodised aluminium GEZE OL 90 N scissor with casement bracket Dark bronze White, RAL White, RAL Anodised aluminium GEZE OL 90 N supplementary top-hung pack Dark bronze Reveal depth 0-30 mm (1 pce per scissor) White, RAL White, RAL Anodised aluminium GEZE OL 90 N supplementary top-hung pack Dark bronze Reveal depth mm (1 pce per scissor) White, RAL White, RAL ➃ Drive rod (cranked), reveal depth 0-30 mm Galvanised ➄ Drive rod (cranked), reveal depth mm Galvanised Anodised aluminium ➅ GEZE OL 90 N supplementary scissor Dark bronze (where a = mm) White, RAL White, RAL ➆ Rod connector (where a = mm) Galvanised See standard version for rods and cover profiles Packaging ➀ 2 3 ➃ ➄ ➅ ➆ a = mm, 0 to 30 mm reveal depth e = 31 to 73 mm a = mm, 0 to 30 mm reveal depth e = 31 to 73 mm

21 OL 90 N / OL 100 electric drives With electric drive for GEZE OL 90 N and OL 100 Possible arrangements The drives can be installed vertically or horizontally on the left or right hand side of the window. The electric drives E 212 R1 and E 212 R are designed for short-time operation (5 min.) and are only suitable for dry areas. The drive E 212 R1 must be used for individual control and group control via 1 changeover switch and the E 212 R for group control via any number of vent switches. The electric drive E 205 has a 5-core cable connection and must be used for group and multi-station operation. For GEZE OL 100 the scissor with sliding casement bracket is required. The following items are also needed: With vertical installation of E 205 Connecting rod 168 mm galvanised Corner transmission With horizontal installation of E 205 Connecting rod ø 12 mm mm long, for 1 scissor Connecting rod ø 12mm mm long, for 2 scissors Supplementary coupling for 3 scissors /used with standard rod 2000 mm and connecting rod 2000 mm) See standard version for rods and cover profiles E 212 R / E 212 R1 E 205 Technical and Types electrical data E 212 R 1, E 212 R E 205 Driving force 1400 N 2000 N Stroke, adjustable mm Max. 70 mm Running time for 50 mm approx. 30 sec. 30 sec. Power consumption 0.4 A 0.5 A Power output 90 VA 110 VA Enclosure rating JP 52 JP 54 Power supply 230 V AC/50 Hz 230 V AC/50 Hz Cable length 2000 mm (Other drives available on request) horizontal vertical With E 212: Coupling piece (for 1 scissor) Drawing: (E 212 R/R1) Horizontal mounting (E 212 R/R1) Vertical mounting (E 205) Horizontal mounting (E 205) Vertical mounting Installation Types dimensions (mm) E 212 R 1, E 212 R E 205 y min x min c min a Horizontal installation min Vertical installation min (assuming casement height of min. 300 mm) 21

22 OL 90 N electric Control units for E 212 R1 Changeover switch E 27 for flush installation (standard socket) Changeover switch E 33 for surface installation E 27 E 33 Control units for E 212 R und E 205 Press switch E 50/1 open-stop-close (for E 212 R and E 205) Press switch E 50/2 open-stop-close with open indicator lamp (for E 205) Flush installation Surface installation Press switch E 50/3 open-close (for E 212 R and E 205) Press switch E 50/4 open-close with open indicator lamp (for E 205) Finish: All press switches in white, button and print black. LED green. Flush and surface installation 22

23 /OL100 drives Description Finish ID No. Anodised aluminium GEZE electric drive E 212 R1, with relay for group Dark bronze control, via 1 changeover switch, 230 V AC White, RAL White, RAL Anodised aluminium GEZE electric drive E 212 R, with 2 relays for group Dark bronze control, via any number of vent switches, White, RAL V AC White, RAL Required accessories (with OL 90 N): Rod coupling, galvanised Corner angle (with vertical installation only) Anodised aluminium Dark bronze GEZE electric drive E 205, 230 V AC White, RAL White, RAL Required accessories for horizontal installation (with OL 90 N): Anodised aluminium connection parts Dark bronze White, RAL White, RAL Additional accessories required for vertical installation (with OL 90 N): Corner transmission Anodised aluminium Dev GEZE OL 90 N-ER 1, with 1 relay, Dark bronze Dev for group control, via 1 press switch, White, RAL 9010 Dev without changeover switch White, RAL 9016 Dev Anodised aluminium Dev GEZE OL 90 N-ER 1, with 2 relays, Dark bronze Dev for group control via any number of switches, White, RAL 9010 Dev without Press switch White, RAL 9016 Dev Anodised aluminium Dev Dark bronze Dev GEZE OL 90 N scissor White, RAL 9010 Dev White, RAL 9016 Dev See standard version for scissors, rods, and cover profiles and, if necessary, supplementary scissors. Control units for electric drive E 212 R1 Changeover switch E 27 (flush installation) Changeover switch E 33 (surface installation) Control units for electric drive E 212 R und E 205 Press switch E 50/1 (flush and surface installation) (for E 212 R and E 205) Press switch E 50/2 (flush and surface installation) (for E 205) Press switch E 50/3 (flush and surface installation) (for E 212 R and E 205) Press switch E 50/4 (flush and surface installation) (for E 205)

24 OL 90 N Commissioning device for E 212 R1 ID No Important for workshop and building site! Single terminal comprising mains motor plug and switch (overall length approx. 2 m). Not suitable for the types E 212 R, E 205, E 206, and E 202 Electric drive Motor plug Plug Switch with plug Mains plug (230 V AC) 24

25 OL 90 N Lockable hand lever Additionally a lockable hand lever is available for the fanlight openers OL 90 N and OL 95. This hand lever is equipped with a cylinder lock (with locking device) and is supplied with 2 keys. The installation of the lockable hand lever is identical to that of the standard lever. The design of the lockable hand lever is based on the regulations published in DIN18104 "Burglar-retardant retrofitted products for windows and doors. According to DIN it is mandatory that a locked lever does not open when the operating force increases beyond 500N. This requirement is exceeded. Finish Id.-no. Anodised aluminium Dark bronze White RAL White RAL OL 90 N Lockable hand lever 25

26 OL 95 Slimline fanlight opener OL 95 The extension of our fanlight opener systems OL 90 N product range ensures there is always plenty of fresh air. Product features An opening width of 220 mm ensures even better ventilation. Particularly suitable for post-rail structures. The product s design and aesthetics offer creative freedom for architects and designers. Unobtrusive installation into post-rail structures due to small overall dimensions. All OL 90 N components can be used in conjunction with the OL 95 scissor stay. Min. casement width 440 mm Max. casement width: with 1 scissor 1200 mm with 2 scissors 2400 mm with 3 scissors 3600 mm Max. leaf weight 60 kg 1) Min. casement height 350 mm Finish: Anodised aluminium (EV1), dark bronze, white, RAL colours on request Please note: OL 95 is NOT suitable for outward opening windows (unlike OL 90 N) 1) Different casement weights are possible, depending on application. Please refer to the appropriate installation drawings for the relevant information. 26

27 Area of application Suitable only for vertically installed top or bottom hung rectangular casements with timber, PVCu or aluminium frames and reveal overlap depths of 0-25 mm. Max. casement weight 60 kg Casement width a max. weight of glass min. 440 mm max mm with 1 scissor stay 30 kg/m 2 max mm with 2 scissor stays 30 kg/m 2 max mm with 3 scissor stays 25 kg/m 2 Min. fitting dimension (D-dimension) and space requirement (mm) Casement height upper space min. fitting requirement dimension D D D D Distance from the casement s centre of gravity to the hinge pivot point: i = 10 to 60 mm Aluminium with reveal overlap Light alloy, flush Timber Euro groove 27

28 GEZE OL 95 Scissor stay with standard casement bracket 1) Description Finish Id.-No. anodised aluminium Scissor stay with dark bronze standard casement bracket white RAL white RAL RAL colours 2) GEZE OL 95 Scissor stay with standard casement bracket GEZE OL 95 Scissor stay without standard casement bracket 1) Description Finish Id.-No. anodised aluminium Scissor stay without dark bronze standard casement bracket white RAL white RAL RAL colours 2) GEZE OL 95 Scissor stay without casement bracket 1) The OL 95 scissor stay can be used in conjunction with all components of the OL 90-N programme 2) Surcharge for RAL colours on request 28

29 OL 100 Product features Release button indicates whether casement is properly engaged With locking device in scissor Easy installation even with deep reveals since scissors and drive rods can be mounted from front Large opening width: approx. 260 mm (approx. 190 mm on request) Only one casement bracket for all overlap depths and materials Simple pressure adjustment for automatic correction of frame inaccuracies All visible parts made of light alloy No visible fixing screws Rod connectors unaffected by tolerance restrictions Each rod connector has 2 screws = double safety Low space requirement above and to side of casement Completely pre-assembled units, which means fewer fittings Drilling template ensures time-saving, precise fitting Excellent design Application Surface-mounted slimline fanlight openers for vertically installed botton or top-hung, and side hung casements (inward), for use on left and right Overlap depths of 0-25 mm Casement weight max. 200 kg, however opening width according to application diagram: approx. 260 mm (standard) (stroke 66 mm) approx. 190 mm (on request) (stroke 42 mm) Standard version Scissor: Visible parts: aluminium 1. Anodised aluminium 2. Dark bronze (anodised) 3. White (coated) RAL 9010 or RAL 9016 Concealed functional components galvanised and chromed black Hand lever: Visible parts: aluminium 1. Anodised aluminium 2. Dark bronze (lever anodised, plate, coated) 3. White (lever: anodised aluminium; base plate: coated) Concealed functional components galvanised and chromed black With inward or outward opening bottom hung casements, safety scissors which restrict the travel of the casement when the scissor is disengaged, must be fitted in addition to the fanlight fitting. (See GEZE FPS gripping and cleaning scissor) Permissible loads ς (kg/m 2 ) Zulässige Belastungen 140 a= Casement width (m) a=flügelbreite (m) = Glass panel weight (kg/m 2 ) 130 ς =Glasfüllgewicht (kg/m 2 ) i = Distance from centre of gravity of i =Abstandsmaß vom Flügelschwerpunkt zu Banddrehpunkt casement 120 to pivot point (mm) of hinge (mm) 110 Example: Beispiel: a a=1,4m = 1.4 m i i = = oder or mm 100 ς=40 = kg/m i= i=50 80 i=40 90 i= ,6 0,8 1 1,2 1,4 1,6 1,8 2 2,2 2,4 2,6 2,8 3 3,2 3,4 3,6 a(m) 1 Schere scissor 2 scissors Scheren 3 Scheren scissors min. Casement Flügelbreite width a The maximum application limits for hand Die maximalen lever operation. Anwendungsgrenzen bei Handhebelbetätigung. max. i 29

30 Standard installation The illustration (right) shows mounting of the GEZE OL 100 to a vertically installed bottom hung window. ➀ Hand lever 2 Corner angle The corner transmission is a pre-assembled unit. Vertical drive rod and horizontal drive rod are fixed in position. Fitting does not involve any extra parts. This corner transmission is made of light alloy and can be adjusted to any angle up to 135 (e.g. for angled windows). 3 Scissor Hinge joint in scissor stay and ball joint on casement bracket facilitate full opening width. ➃ Casement bracket The casement pressure can be adjusted using an Allen key so that the casement is held firmly against the window seal. Casement Space require- Fitting height ment (top) y, dimension D, (mm) min. (mm) min. (mm) > Timber Space requirement, side: x = D +13 mm UPVC Aluminium Fixing using countersunk self-tapping screws 4.8 DIN 7972 through at least 2 profile sections/walls. From 40 kg/m 2 panel weight: scissor bearing and casement bracket, countersunk self-tapping screws 4.8 DIN 7972 as metal reinforcement. Fixing using countersunk self-tapping screws 4.8 DIN 7972 through at least 2 profile sections/walls. Threaded screws M5 with rivet nut (3 pcs for casement bracket). From 40 kg/m 2 panel weight: scissor stay base and casement bracket, threaded screws M5 with reinforcement plate. 30

31 OL 100 Description Finish ID No. Anodised aluminium GEZE OL 100 basic fitting with Dark bronze hand lever (66 mm stroke) White, RAL White, RAL Anodised aluminium Supplementary scissor GEZE OL 100 Dark bronze White, RAL White, RAL Anodised aluminium End cover piece for last scissor Dark bronze White, RAL White, RAL mm Galvanised Rod ø 12 mm, length: 3000 mm Galvanised mm Galvanised Anodised aluminium Cover profile 1) mm long Dark bronze White, RAL White, RAL Anodised aluminium Cover profile 1) mm long Dark bronze White, RAL White, RAL Anodised aluminium Dark bronze Cover profile mm long White, RAL White, RAL Mill aluminium ) Mitred at each end Accessories Description Finish ID No. Rod guide Corner transmission Galvanised Anodised aluminium Hand lever for GEZE OL 100 Dark bronze with 42 mm stroke for 190 mm opening width White, RAL White, RAL Anodised aluminium Hand lever for GEZE OL 100 Dark bronze with 66 mm stroke for 260 mm opening width White, RAL White, RAL Anodised aluminium Corner transmission cover Dark bronze White, RAL White, RAL Drilling template for timber Drilling template for UPVC and aluminium

32 Special versions and special accessories Scissor with anti-unhinge feature Description Finish ID No. Anodised alu Scissor with anti-unhinge feature Dark bronze White, RAL White, RAL Supplementary locking device For use on opposite hand lever side with supplementary corner transmission Description Finish ID No. Anodised alu Supplementary locking device (1 pce) Dark bronze White, RAL White, RAL Anodised alu Supplementary angle for overlap 0-10 mm Dark bronze White, RAL White, RAL Angled window (with standard corner transmission, bendable) Description Finish ID No. Anodised alu Scissor with sliding casement bracket Dark bronze for angled windows White, RAL White, RAL Centre operation with 2-casement windows Description Finish ID No. Anodised alu Unit for central operation with hand lever Dark bronze (fork, covers, and coupling) White, RAL White, RAL

33 OL 100 Corner angle gear Fz 100 Product features For fixed and detachable cranking handle For use on left and right Also for angled windows owing to bendable corner transmission Narrow design Fully concealed by profile High load-carrying capacity (quadruple thread) On request: Adjustable anti-overload device (ex-factory default setting 7 Nm) Only 10 crank revolutions for full opening width of 260 mm Stroke 66 mm Stroke limiting possible for opening width up to approx. 150 mm Simple fixing Drive rod, ø 12 mm, can be directly attached Scissor with sliding casement bracket required Distance Centre of gravity of casement Application for rectangular windows Only for vertically installed bottom hung casements (inward), transmission possible on both left and right. a Casement width min. 600 mm b Casement height min. 400 mm i Distance from gravity centre of casement to pivot point of hinge = 20 to 100 mm Ü Overlap depth 0-25mm D Outer edge of casement to centre of drive rod (see table) X Space requirement at side X = D +13 mm, X min. = 30 mm, D side, min. 17 mm Y Space requirement, top (see table) Application for angled windows Only for vertically installed bottom, top or side hung inward opening casements, transmission possible on both left and right. a Casement width P Length of angled leg mm W Angle at window b2 Casement height min. 400 mm i Distance from centre of gravity of casement to pivot point of hinge = 20 to 100 mm Ü Overlap depth 0-25 mm D Outer edge of casement to centre of drive rod (see table) X Space requirement at side X = D +13 mm, X min. = 30 mm, D side, min. 17 mm Y Space requirement, top (see table) Casement D-dimen- Space requiheight b sion, top rement Y, top mm min. 34 mm /21 mm D+13 mm from /19/21 mm D+13 mm See drawing /0-1 for mounting dimensions and application restrictions Casement D-dimen- Space requiheight b sion, top rement Y, top mm min. 34 mm from mm 32 mm See drawing /0-6 for mounting dimensions and application restrictions 33

34 OL 100 Vertical gear Fz 101 Product features For fixed and detachable cranking handles For use on left and right Also for angled windows owing to bendable corner transmission Narrow design Fully concealed by profile High load-carrying capacity (quadruple thread) On request: Adjustable anti-overload device (ex-factory default setting 7 Nm) Only 10 crank revolutions for full opening width of 260 mm Stroke 66 mm Stroke limiting possible for opening width up to approx. 150 mm Simple fixing Drive rod, ø 12 mm, can be directly attached Scissor with sliding casement bracket required Supplementary locking devices can also be vertically mounted as per drawing /0-8 Distance Centre of gravity of casement Application for rectangular windows Only for vertically installed bottom top or side hung inward opening casements, transmission possible on both left and right. a Casement width min. 600 mm b Casement height min. 400 mm i Distance from gravity centre of casement to pivot point of hinge = 20 to 100 mm Ü Overlap depth 0-25mm D Outer edge of casement to centre of link arm (see table) X Space requirement at side X = D +13 mm, X min. = 30 mm, D side, min. 17 mm Y Space requirement, top (see table) Application for angled windows Only for vertically installed tilt casements (inward), transmission only possible via flush window angle. a Casement width P Length of angled limb mm W Angle at window b2 Casement height min. 400 mm i Distance from gravity centre of casement to pivot point of hinge = 20 to 100 mm Ü Overlap depth 0-25 mm D Outer edge of casement to centre of link arm (see table) X Space requirement at side X = D +13 mm, X min. = 30 mm, D side, min. 17 mm Y Space requirement, top (see table) Casement D-dimen- Space requiheight b sion, top rement Y, top mm min. 34 mm /21 mm D+13 mm from /19/21 mm D+13 mm D-dimension of 19 mm is required if supplementary locking device is used. Drawing /0-1 Casement D-dimen- Space requiheight b sion, top rement Y, top mm min. 34 mm from mm 32 mm D-dimension of 19 mm is required if supplementary locking device is used. Drawing /0-6 34

35 OL 100 Gear Fz 100, Fz 101 Description Finish ID No. GEZE Fz 100 corner transmission gear Galvanised GEZE Fz 101 vertical gear Galvanised Accessories for all gears Anodised aluminium Fixed cranking handle, with collapsible handle Dark bronze and cranking a handle holder (fully extended White, RAL length 1400 mm) White, RAL Anodised aluminium Detachable cranking handle, with collapsible Dark bronze handle with coupling bell-socket White, RAL (fully extended length 1400 mm) White, RAL Linkage bearing with bearing plate, for gear Fz 90- Galvanised Fz 92 and Fz 100-Fz 101, for connecting rod Black Anodised aluminium Connecting tube, outer diameter 15 mm, Dark bronze stock length 6000 mm White, RAL White, RAL Silver-colour Collapsible handle Fz 45/32 Brown White, Coupling bell-socket Fz 45/14 Silver-colour Dark bronze Roll pin 4 x 16 mm Galvanised Silver-colour Cranking handle holder Fz 45/8 Brown White, Drilling template for connecting tube Silver-colour Anti-overload device painted on request Dark bronze White, RAL White, RAL See standard version for rods and cover profiles and, if necessary, supplementary scissors 35

36 PS In addition to the fanlight fittings, restricting devices must be mounted in the case of bottom hung casements. These devices restrict the travel of the casement (gripping position) when the scissor stay is disengaged so that the casement does not become a potential danger during cleaning work. Plans: 41313/0-4 for aluminium 41313/0-5 for timber and PVCU If required, various mounting shims are available for different profiles. GEZE FPS, the intelligent gripping and cleaning scissor for vertically installed rectangular bottom hung casement windows. Gripping pins in a telescopic bar slide along wave - shaped guides until the cleaning position is reached. To do this, only the left-hand bar has to be lifted by hand. If the casement falls open, the gripping pins move through the guide into the gripping hook, thus stopping the casement from falling further. 2 FPS units and 2 accessory fixing plates for timber, PVCu, and aluminium windows are required for each casement. Available in three sizes. Product features For use with OL 90 N and OL 100 Casement heights: min. 360 mm, max mm For vertically installed rectangular windows with opener fitting Rebate width min. 11 mm, rebate depth min. 18 mm High degree of safety owing to numerous gripping positions Casement and frame components can be detached for mounting and transport Mounting template Length when closed Gripping opening width Gripping position Cleaning position Casement height Examples: Timber Aluminium PVCu Without shims Euro nut With casement shim for Euro nut 36

37 Range of application Casement height (mm) Casement height (mm) With OL 90 N Aluminium windows With OL 100 Aluminium windows Size 1 not possible not possible not possible Casement weight Casement weight With OL 90 N Timber/PVCu windows With OL 100 Timber/PVCu windows Size 1 Size 2 Size 2 Size 3 Size 3 not possible not possible not possible Cleaning opening angle GEZE gripping and cleaning scissor Casement height (mm) Casement height (mm) Casement weight Range of cleaning and safety function Cleaning opening angle not possible not possible not possible not possible not possible not possible Gripping safety function with opening angle only Casement weight Description Number ID No. FPS 340 size 1, galvanised steel (packaging unit 20 pcs) 1 pce FPS 520 size 2, galvanised steel (packaging unit 20 pcs) 1 pce FPS 720 size 3, galvanised steel (packaging unit 20 pcs) 1 pce Accessory: FPS mounting plates for aluminium windows (mounting parts for casement and frame - packaging unit 20 pcs) 1 pce Accessory: FPS mounting plates for timber and PVCu windows (mounting parts for casement with Euro nut and frame - packaging unit 20 pcs) 1 pce Accessory: FPS mounting plates for PVCu windows (mounting parts for casement with Euro nut and frame - packaging unit 20 pcs) 1 pce Casement shim 4 mm 1 pce mm 1 pce mm 1 pce mm 1 pce mm 1 pce Frame shim 3 mm for aluminium windows 1 pce mm for aluminium windows 1 pce mm for PVCu windows 1 pce mm for PVCu windows 1 pce ANGLED rebate PVCu windows 1 pce Mounting templates 1 set Size 1 Size 1 Size 2 Size 3 Size 2 Size 3 Gripping and cleaning scissor 37