CO2 Laser Cutting System WTS4112 FALCON-S. (May 2010) Shibuya Kogyo Co.,LTD.
|
|
- Ada Kelley
- 5 years ago
- Views:
Transcription
1 CO2 Laser Cutting System WTS4112 FALCON-S (May 2010)
2 Outline of Laser Cutting Machine Full Closed Cover Type Work Table Cutting Head Operation Panel Laser Resonator ( built-in ) NC Control Unit ( built-in ) Remaining Material Pan
3 Efficient Operator-friendly Laser Cutting Machine Compact Footprint Only 5.71m 22!! This machine doesn t take up a much space. Advantages 1. Able to reduce investment in ground and building at building new factories for laser cutting system. 2. Allows more space to be used by replacing existing bigger machine. 3. Space for peripheral equipment such as chiller, compressor and dust collector can be secured easily.
4 Efficient Operator-friendly Laser Cutting Machine Advantages of of BEAM FLYING Method Advantages 1. HIGH SPEED and ACCURACY for light weight drive section. 2. Workpieces DON T shift because of the fixed work table. 3. The work table is fixed so that machine size is very COMPACT.
5 Environmental Aware Operator-friendly Laser Cutting Machine High Performance Dust Collection Fume Dust Free Structure for Clean Work Environment Work Table Exhaust System Exhaust Duct
6 Shibuya Original Laser (Model:SOL13H) Medium Speed Spiral Flow Laser Resonator Medium speed gas flow results in 1)More compact design than fast axial flow lasers 2)Higher beam quality than slow axial flow lasers Medium speed gas flow reduces 1)Load on the blower (longer than other lasers) 2)Deposits on the electrodes 3)Deposits on internal mirror Medium speed gas flow results in Dramatically longer life of mirror (8000Hrs.)
7 Shibuya Original Laser (Model:SOL13H) Multi-Path Type Resonator Very High Quality Beam Smaller Consumption of Electricity Long Resonant Length (as long as 14m) The 5inch lens can be used with a wider variety of materials and thicknesses.
8 Shibuya Original Laser (Model:SOL13H) Maximum Material Thickness Mild Steel(O2) Stainless Steel(N2) Aluminum(Air) Arclylic(Air) Thickness (mm) These data figures may vary depending on material conditions etc.
9 Operator-friendly Laser Cutting Machine Crash-Protection Torch The cutting head swings to prevent damage. No Damage Crash
10 Operator-friendly Laser Cutting Machine Crash-Protection Torch The highly responsive damage sensor and crash protection torch prevents costly damage and down time. Re-alignment of torch is not required after torch crashes
11 Operator-friendly Laser Cutting Machine Workpiece Positioning Mechanism (( Clamping and Locating )) Origin position can be set easily by the positioning pin ( X-axis ) and the clamp. Air clamp is the standard equipment.
12 Operator-friendly Laser Cutting Machine Even large workpieces can be be loaded and positioned without trouble. The transfer ball device on the work lifter enables a single operator to load large workpieces. The work lifter turns over during cutting operation so that fumes and dust don t get in the gap between the free bearings. The bearings rotate to the reference side so that workpieces are not shifted. Easy operation by foot pedal.
13 Operator-friendly Laser Cutting Machine Support Plate Quick release for its insertion mechanism Cutting program is registered in NC so that customers can manufacture the support plate themselves. Micro-Jointless-Cutting can be made for cutting products over the pitch of support plate.
14 Operator-friendly Laser Cutting Machine Remaining Waste Tray Remaining material can be taken out easily by two remaining waste trays on the side of the work table. Remaining materials are not spattered so that the work environment is clean.
15 Efficient High performance CNC (Model:21i-MB) Features The operation panel can be stored, which makes effective use of work space. Full of Shibuya s own technical know-how ( Up to 8 kinds of materials, 12 different thickness and 10 different parameters for microfabrication to high-speed cutting ) The followings are the standard functions. - Maintenance cycle monitoring for consumable parts such as filter, oil..etc. - Self trouble diagnosis program - Troubleshooting display External operation box is equipped as standard equipment inch color LCD display ( with softkey ) USB memory for program installation
16 CO2 Laser Cutting System WTS4112/SOL13H Standard Equipment Chiller Chiller (air dryer included) Rotary Work-Lifter (Japanese Patent) CG (capacitive gap) Sensor Air Purge for External Beam Path
17 CO2 Laser Cutting System WTS4112/SOL13H Options Auto Focus Touch Sensor Deionizer Compressor Dust Collector Exhaust Fan CAD/CAM Software CAS6000 Rotary Table LAN Connection
18 Specifications : WTS4112/SOL13H Model Processing area Max. loading weight Cutting speed Rapid traverse speed (X,Y) Rapid traverse speed (Z) Z-axis travel range Controlled axes Simultaneous controllable axes Axes drive Minimal unit of NC input Laser resonator model Input power requirement 1 Dimensions 2 Machine weight 1 WTS4112/SOL13H mm 140kg 0~12m/min 30m/min/Axis 8m/min 90mm 3(X,Y,Z) 2(X,Y) AC servo motors 0.001mm SOL13H (1300W) 3ph 200V 50/60Hz 47.2kVA 2450(L) 2330(W) 1670(H)mm 5000kg 1 Includes standard accessories such as laser resonator, chiller, etc. 2 Includes laser resonator. Chiller not included.
Sheet metal processing center EML Z-3510 NT EML Z-3610 NT
Sheet metal processing center EML Z-3510 NT EML Z-3610 NT Punching technology Laser technology The new sheet metal processing center EML Z a triad of speed, flexibility and productivity The decisive answer
More informationccu-one Products Head office 23, Sicheong-ro 940 beon-gil, Paltan-myeon, Hwaseong-si, Gyeonggi-do, Korea Tel ~7 Fax.
Products CNC Combined Machine of Plasma & Machining CNC Combined Machine of Plasma & Drilling CNC Industrial Plasma Cutting Machine CNC Duct Plasma Cutting Machine CNC Gas Cutting Machine ccu-one Head
More information5 AXES TOOL GRINDING MACHINE
5 AXES TOOL GRINDING MACHINE Speciall Desiged for Stadard/Cople Tools Maufacturig & Re-Sharpeig of Tools ad Cutters 19/52 KW SPINDLE POWER for very high material removal Rate with excellent low Speed Work-piece
More informationThe machine has a continuous TRUMPF CLASSIC service contract
TRUMPF TruLaser 1030 2D Laser cutting machine Manufacturer TRUMPF Model TRULASER 1030 Manufacture year 2010 Control B&R Automation PC 620 Machine number Travels Laser beam on A0215A0053 X 3.048 mm / Y
More informationMY-L1325FC/L1530FC Metal Fiber Laser Cutting Machine
MY-L1325FC/L1530FC Metal Fiber Laser Cutting Machine Wisely Laser Machinery Limited 7F, Blding 7th, JSC Industrial Area, Jingnan Road, Buji, Shenzhen 518112 China Tel: 0086-755 8996 1916 Fax: 0086-755
More informationSHARP Model SVX Axis Simultaneous Vertical Machining Center
SHARP Model SVX-5 5-Axis Simultaneous Vertical Machining Center PRECISION MACHINE TOOLS Sharp Industries, Inc. 351 Challenger Street Torrance, CA 953 Tel 31-37-599 Fax 31-542-6162 Email: info@sharp-industries.com
More informationTouch Screen CNC Control
Touch Screen CNC Control FEATURES Nearly four decades ago, Rottler pioneered automation and programming by utilizing electronics and computers. Today, the SAD Surfacing machines incorporate the latest
More informationMETALLOGRAPHY EQUIPMENT
Fully matic Abrasive Cutting Machine - SERVOCUT 602 www.worldoftest.com/fully-automatic-abrasive-cutting-machine-servocut-602 Applications: Fully matic Abrasive Cutting Machine - SERVOCUT 602 is a fully
More informationCNC Turret Punch Press. Innovative Technologies.
CNC Turret Punch Press Innovative Technologies. CNC Turret Punch Press ETP Series manufactured by Ermaksan s proved quality and experience on production of sheet metal workbenches is being presented to
More informationOMA PLA SMA BEVE LER The reliable, easy-to-use, and compact system
DMX DMX AUTOMATED PLASMA BEVELLER AUTOMATED PLASMA BEVELLER The reliable, easy-to-use, and compact system for safe, high-quality plasma bevel cutting. THE FUTURE OF BEVEL CUTTING IS HERE. DMX is the next
More informationFNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way
RICH WELL 206.0 Dimensions R450 E FNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way 20 C D Chip conveyor 092 H G B 46 575 A F Unit:mm A B C D E F G H FNL220LSY/FNL220LY 952 2946 2700
More informationCNC Machining Center BAZ 895n IQ
CNC Machining Center BAZ 895n IQ * Due to the continuous improvements of our products, some machine changes may apply. Features Use of SYNTEC control system, fully automatic production from labeling, loading,
More informationOptions Markers Pneumatic marking For punching and engraving plates. The depth of marking is controlled by varying the compressed air pressure and the speed. Recommended for use on plates thicker than
More information3 AXES LINEAR DRIVE LASER CUTTING MACHINE
LASER CUTTING 3 AXES LINEAR DRIVE LASER CUTTING MACHINE 3 AXES LINEAR DRIVE LASER CUTTING MACHINE RELIABLE, HIGH QUALITY LASER PROCESSING WITH AN APPLICATION-ORIENTED APPROACH HIGH SPEED LINEAR DRIVES
More informationV700 HIGH SPEED MACHINING CENTER LONG CHANG MACHINERY CO., LTD. Roller Guide System
Roller Guide System V700 HIGH SPEED MACHINING CENTER LONG CHANG MACHINERY CO., LTD. 01 FIRST V700 SPEED & ACCURACY HIGH SPEED MACHINING CENTER 3-axes high rigidity & precision roller guide ways. Direct
More informationLILIAN. High Precision & Excellent Performance. LILIAN, the leading milling machine builder in Taiwan, was established in 1978
LILIAN LILIAN High Precision & Excellent Performance LILIAN, the leading milling machine builder in Taiwan, was established in 1978 and has built more than twenty thousand manual & CNC milling machines
More informationDUGARD. Machine Tools Since Dugard 52TT/52TTS Twin Spindle CNC Lathe Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles
DUGARD Machine Tools Since 1939 Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles www.dugard.com Designed for Precision Part Machining of; One-Hit Machining Automobile, motorcycle and bicycle
More informationPERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE
More informationDUO LZ DRILLING SERIES DUAL HIGH SPEED MICRODRILLING MACHINE
DUO LZ DRILLING SERIES DUAL HIGH SPEED MICRODRILLING MACHINE DUO SINGLE SPINDLE ALL AXES WITH DUO TWO SPINDLE THE PLURITEC ONE,TWO or THREE HEAD MICRODRILLING AND/OR ROUTING MACHINE WITH LINEAR MOTORS.
More informationMCG-5X 5-axes Gantry Type Machining Center
TM TM MCG-5X 5-axes Gantry Type Machining Center BUFFALO MACHINERY CO., LTD. 56, Lane 318, Der Sheng Road, Ta Ya, Taichung City, Taiwan, R.O.C. P.O. Box 32, Ta Ya, Taichung City, Taiwan R.O.C. Tel: 886-4-25
More informationTurmatic L 2530 Laser Cutter YCM 106 CNC CNC Machine HB 16 Balancing Machine A75 Tube Bender QC12Y-8*3200 Shear WC67Y-100/3200 Press Brake
Turmatic L 2530 Laser Cutter YCM 106 CNC CNC Machine HB 16 Balancing Machine A75 Tube Bender QC12Y-8*3200 Shear WC67Y-100/3200 Press Brake Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page:2 Total
More informationNEW VALID VT-1000 VERTICAL LATHE
NEW VALID VT-1000 VERTICAL LATHE The Valid VT-1000 CNC Vertical Lathe is the result of several years of collaboration between Valid Machinery of the United States and Precursor Tech Co. LTD. of Taiwan.
More informationPicoTurn CNC. PicoTurn CNC. High-tech and suitable for training purposes. Mini CNC Lathe.
Mini CNC Lathe High-tech and suitable for training purposes with advanced GPlus 450 CNC or Siemens 808 D control with autom. 4-station tool changer center width 550 mm Small CNC Machine for training as
More informationHigh Precision CNC Lathe
High Precision CNC Lathe GN3200 High efficiency through space savings A compact design with a total machine width of 700 mm and a floor space requirement of 1.04 m2 has made it possible to shorten production
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationComputer Numeric Control
Computer Numeric Control TA202A 2017-18(2 nd ) Semester Prof. J. Ramkumar Department of Mechanical Engineering IIT Kanpur Computer Numeric Control A system in which actions are controlled by the direct
More informationCNC SYSTEMS PUNCHING SHEARING MARKING. Trilogy Machinery, Inc.
The CNC Systems from SUNRISE are plate, angle and channel positioning systems with user-friendly interfaces. Many options are available factory-installed on Dual-Cylinder Ironworker or Punching Machines
More informationChakra. BMV60 Series CNC Vertical Machining Centers. Chakra variants BMV60, BMV60 T20, BMV60 TC20, BMV60 TC24. For powerful and precise performance
Chakra BMV60 Series CNC Vertical Machining Centers For powerful and precise performance Chakra variants BMV60, BMV60 T20, BMV60 TC20, BMV60 TC24 TM BMV60 Series CNC Vertical Machining Centers Chakra variants
More information3 Axes Linear Motor Drive Laser Machine
3 Axes Linear Motor Drive Laser Machine R Ultrafast! Ultraprecise! Full range, fine cutting laser. What do leading manufacturer's need in a laser machine to stay competitive? Amada produced the LC-F1NT
More information5M1E HIGH SPEED HIGH PERFORMANCE DRILLING & TAPPING CENTER
5M1E003-00 HIGH SPEED HIGH PERFORMANCE DRILLING & TAPPING CENTER 14001 YCM FV50T high speed high performance drilling & tapping center is designed with versatility to meet today s diverse requirements,
More informationAIR PLASMA CUTTING C101
AIR PLASMA CUTTING C101 Quick specs Industrial Application: Home workshops Metal workshops For These materials: Mild Steel Brass Input Power: 400V, 3-Phase Amperage Range: 20-100A Rated Output at 40 C
More informationHydraulic NC Guillotine & NC Panbrake Package Deal
Product Brochure K059 METALMASTER HG-2504 & PB-830T Hydraulic NC Guillotine & NC Panbrake Package Deal Ezy-Set NC-89 Guillotine - 2500 x 4mm, NC Ezy Touch Screen Panbrake 2500 x 4mm Page 1 of 6 Specifications
More informationCHX 840 and CHX 1300 CIRCULAR SAW. Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter
CHX 840 and CHX 1300 CIRCULAR SAW Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter CIRCULAR SAW TOOTH FACE AND TOOTH TOP FOR WHEN YOU REQUIRE THAT LITTLE BIT MORE.
More informationAll these possibilities...
The VECTOR Revolution 180 contour edgebander has had immediate success in the market due to the simplicity and effectiveness of its revolutionary operating system. The patented Revolution process is controlled
More informationCurrent status of Disk Lasers for sheetmetal cutting and welding
Current status of Disk Lasers for sheetmetal cutting and welding Iwan Papic, Gerry Jones TRUMPF Luton AILU 12 November 2008 Disk lasers for cutting and welding 12.11.2008 Presentation outline Disk laser
More informationTW-400HV Combination Universal Horizontal / Vertical Machining Center
TW-400HV Combination Universal Horizontal / Vertical Machining Center www.topwell.com.tw TW-400HV Combination Universal Horizontal / Vertical Machining Center NEW CENTURY NEW THINKING NEW GENERATION 1
More informationMAIN MACHINE FEATURES
DATE: 05/2011 MAIN MACHINE FEATURES 2 Axis Surface Grinding Machine with Hydraulic Table. Sub-assemblies exhibit high static and dynamic stiffness and excellent damping qualities. All assemblies have good
More informationSTANDARD STANDARD PRODUCT CATALOG SHEET METAL MACHINERY SHEET METAL MACHINERY
STANDARD STANDARD SHEET METAL MACHINERY SHEET METAL MACHINERY PRODUCT CATALOG Standard Sheet Metal Machinery, Inc., is incorporated in Lisbon, Iowa USA. The company speciaizes in sales and service of machinery
More informationPrepared for the future
Press Release INDEX turn-mill center Prepared for the future With the turn-mill center introduced during its in-house exhibition in June 2014, INDEX continues the tradition of the successful compact G-series
More informationMachine Tools That Create Solutions Since 1939
DUGARD Machine Tools That Create Solutions Since 1939 Dugard 1000Y Plus / 1500 Vertical Machining Centres www.dugard.com The Leading Edge in Precision Machining Now with 610mm Y travel and heavy duty roller
More informationX.mill 1100 L. X.mill 1100 L. CNC Vertical Machining Center. Universal Machining Center with customized options.
CNC Vertical Machining Center Universal Machining Center with customized options GPlus 450 or Siemens 828D CNC control with touch screen technology, plus USB port Travel X-axis 1100 mm Y-axis 600 mm Z-axis
More informationMax. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers:
CYCLE-CONTROLLED PRECISION LATHE SE 320 NUMERIC Description The SE 320 NUMERIC machine is a universal CNC-lathe machine with digitally controlled drives and a cycle control for the processing of bottles
More informationSLV 1000/1000M VERTICAL TURNING CENTER
NC Specifications / FANUC Series Controlled axis Operation functions Interpolation functions Feed function Spindle function Tool functions Program input Setting and display Max. feed axes Feed axes Item
More informationGF Machining Solutions. Mikron MILL P 800 U ST
GF Machining Solutions Mikron MILL P 800 U ST Mikron MILL P 800 U ST Turning. Roughing. Finishing. One clamping operation. Mikron MILL P 800 U ST (simultaneous turning) is a new solution based on the successful
More information$42, $46, Product Brochure For S961. Features
HG-3212VR - 3200 x 12mm Mild Steel Shearing Capacity 1-Axis Ezy-Set NC-89 Go-To Control & Hardened Ballscrew Backgauge ORDER CODE: MODEL: Ex GST Inc GST $42,500.00 $46,750.00 S961 HG-3212VR Shearing Capacity
More informationHeadquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
More informationBARON-MAX 5-Axis Vertical Machining Centers
BARON-MAX 5-Axis Vertical Machining Centers 5-axis profiling vertical machining centers provides a cost-effective solution for five-axis machining operations The 5 Axis or 5 Face gives you Increased flexibility
More informationTurning Super Precision RS 51 Turning Center
Turning Super Precision RS 51 Turning Center Quotation to: ABMNameAlpha Quotation Number: SOHDocumentOrderInvoice Contact: Contact Name Address: ShipToAddressLine1 ShipToAddressLine2 ShipToAddressLine3
More informationCNC Grinding Center Model Evolution
CNC Grinding Center Model Evolution High-Precision Tool Grinding Machine with 5 Axes The newest dimension in tool grinding Quality without compromise The Model Evolution has been developed for the production
More informationMCV-300 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.
MCV-3 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. MCV-3 CARTRIDGE SPINDLE Well balanced, rigid and easy maintenance, which is built in temperature controlled environment. Spindle, bearings,
More informationKinetic.
Kinetic Kinetic Engineering Design Ltd PO Box 302 608 North Harbour 0751 30 Triton Drive, Albany Auckland 0632 New Zealand Ph: 64 9 968 8368 Fx: 64 9 968 8365 sales@kineticusa.com www.kineticusa.com Kinetic
More informationThe small production machine
KEL-VISION The small production machine Produkte-Übersicht 1 KEL-VISION The small production machine 2 Workhead n8-800 min-1 work holder MT5 / ASA5 DIN 55026 #5 manual fine adjustment for corrections of
More informationFiber Optic Device Manufacturing
Precision Motion Control for Fiber Optic Device Manufacturing Aerotech Overview Accuracy Error (µm) 3 2 1 0-1 -2 80-3 40 0-40 Position (mm) -80-80 80 40 0-40 Position (mm) Single-source supplier for precision
More informationHIGH PERFORMANCE TRAVELING COLUMN VERTICAL MACHINING CENTER
HIGH PERFORMANCE TRAVELING COLUMN VERTICAL MACHINING CENTER 1 With the installation of dividing wall in the working area, the TCV series can implement machining and set up workpiece simultaneously. It
More informationSeries GWIRE EDM FOR ULTRA PRECISE MACHINING
Series GWIRE EDM FOR ULTRA PRECISE MACHINING G Series Mechanical Structure Mono bloc Meehanite cast elements designed using Finite Element Methods (FEM) provide exceptional damping properties and exceptional
More informationAIR PLASMA CUTTING C71
AIR PLASMA CUTTING C71 Quick specs Industrial Application: Home workshops Metal workshops For These materials: Mild Steel Brass Input Power: 400V, 3-Phase Amperage Range: 20-70A Rated Output at 40 C (104
More informationBROCHURE. RM-MaxiMill3D CNC MACHINES INDUSTRIAL MACHINES ROBOTIC SYSTEM
BROCHURE RM-MaxiMill3D CNC MACHINES INDUSTRIAL MACHINES ROBOTIC SYSTEM RM-MAXIMILL3D High-precision CNC milling machine www.ronchinimassimo.com HIGH PRECISION CNC MACHINE RM-MaxiMill3D is a high-precision
More informationCNC TURNING CENTRES B1200-M-Y
CNC TURNING CENTRES B1200-M-Y Great versatility and superb chip removal. B1200 2-3 The family of BIGLIA B1200 lathes universally appreciated for their rigidity, accuracy and durability, has been designed
More informationX.mill X.mill Vertical CNC Machining Centers
Vertical CNC Machining Centers Even in this machine class, X.mill stands for proven quality, high productivity and low maintenance, which makes it an ideal solution for effective, low-cost series production
More informationCNC machining centres. accord wd. Cnc Machining cell for doors and windows
CNC machining centres accord wd Cnc Machining cell for doors and windows accord wd Cnc Machining cell for doors and windows Flexible work cell for the production of door and window frames, fitted with
More informationSL 3500Y series Y-AXIS HORIZONTAL TURNING CENTER
NC Specifications / FANUC Series Controlled axes Item 3-axis(X,Y,Z) Description Controlled axes Max. simultaneously controlled axes Least input increment Positioning(G00) / Linear Interpolation(G01) Circular
More informationV-Turn 410/ PRECISION LATHE
PRECISION LATHE Page 2. Highlights Page 3. Machine construction and feed system Page 3. Main spindle drive Page 4. Toolpost Page 4. Tailstock and auxiliary systems Page 5. 3 Axis Digital Read Out - X.pos
More informationSintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore Tel: Fax:
Sintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore 658079 Tel: +65 63167112 Fax: +65 63167113 High-power Nd:YAG Self-floating Laser Cutting Head We supply the laser
More informationEXXACT PLUS New generation of machine for heavy duty wood composite and plastic processing
2 ANDERSON GROUP EXXACT PLUS New generation of machine for heavy duty wood composite and plastic processing With over 40 years of experience in machine engineering and production, Anderson has developed
More informationFlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company
FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from WEINIG: FlexiRip is synonymous with flexible ripping The original Jrion from WEINIG stands for
More informationHigh Performance Horizontal Machining Center
High Performance Horizontal Machining Center High Performance Horizontal Machining Center The Yeong Chin Horizontal machining centers are specially developed for high efficiency machining industries; automobile
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationDUGARD. DUGARD Machine. Dugard Multi-Function Lathes BNC 1800 / BNC 2200 / BNC Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 Dugard Multi-Function Lathes BNC 1800 / BNC 2200 / BNC 2600 DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 DUGARD BNC Multi-Function
More informationFolding system TURBObend
RAS Reinhardt Maschinenbau GmbH Perfectly suited for all roof and architectural profiles! Designed for the roofing, architectural and metal construction markets, the is revolutionary for its technology
More informationTHE REBELLION KEEPS GROWING. EMP 215ic EMP 235ic EMP 255ic EMP 320ic
THE REBELLION KEEPS GROWING. EM 215ic EMP 215ic EMP 235ic EMP 255ic EMP 320ic REBEL: THE TRUE MULTI-PROCESS INDUSTRIAL MACHINES YOU HAVE TO SEE TO BELIEVE. Whether you choose the portable-single phase
More informationMETALMASTER HG-3216VR. Hydraulic NC Guillotine - Variable Rake x 16mm Mild Steel Shearing Capacity. Product Brochure
Product Brochure S9615 METALMASTER HG-3216VR Hydraulic NC Guillotine - Variable Rake 3200 x 16mm Mild Steel Shearing Capacity Page 1 of 5 Right View Front View Side View Rear Guarding 3 Safety Electronic
More informationCNC TURNING CENTRES B750 B1250
CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.
More information1640DCL Digital Control Lathe
1640DCL Digital Control Lathe MACHINE SPECIFICATIONS Multiple Function CNC Lathe 1. Manual Hand wheel Operation 2. CNC G-Code Operation 16.1 swing over bed, 8.6 swing over cross-slide 2.05 diameter hole
More informationQIROX : The system for automated welding and cutting.
QIROX 217 QIROX : The system for automated welding and cutting. QIROX is the new CLOOS product brand comprising all solutions for automated welding and cutting. Due to its modular design, the QIROX system
More informationHigh Speed, High Rigidity & Super Multi-Tasking in a Compact Machine
1 High Speed, High Rigidity & Super Multi-Tasking in a Compact Machine High speed! Z-axis rapid traverse 27 m/min C-axis rotation speed 600 min -1 High rigidity milling! Y-axis +/-60 mm (+/-2.36") Equipped
More informationSTC-205Di. Quick. Specs. For TIG, Plasma and Stick Welding A combo machine for arc welding and plasma cutting
STC-0Di Quick Specs Application: Metal Fabrication Maintenance and Repair Auto Body Light Industrial Process: DC TIG (GTAW) Plasma Cutting Stick (SMAW) Input Power: 0V, -Phase Amperage Range: TIG: -00A
More informationPRECISION CUTTING MICRACUT 202
PRECISION CUTTING MICRACUT 202 MICRACUT 202 MICRACUT 202 precision cutters are used for precise and deformation-free cutting of Metals, Ceramics, Electronic Components, Crystals, Composites, Biomaterials,
More information9/3, Soi Inthamara 47, Suthisarn Road, Bangkok, Thailand, (662) , , Facimiles (662) ,
Simple CNC MultiSlide Autimatics LICO, A leading manufacturer of automatics in Taiwan, announced a newly developed automatic bar machine. "The Simple CNC MultiSlide Automatics" models LNA36/42 T- SERIES.
More informationN A R E X
N A R E X P a g e HYDRAULIC CNC TURRET PUNCH SPECIFICATIONS:. Nominal Force 300 KN 2. Work piece Size 500 x 4000 mm 3. Max. work piece weight 56 Kg 4. Max. work piece thickness 6.35 mm 5. Max Punch diameter
More informationVERTICAL MACHINING CENTER
MCH-630 MCV-7 VERTICAL MACHINING CENTER MCV-A MCV-60 MCV-BA MCV-10 MCV-1250 MCV-1450 MCV-1700 MCV- No. 3, Kung-Yeh Lane, Fengcheng Road, Nanshih Village, MCV-2600 Wufeng District, Taichung City, 41357,
More informationThe Ultimate in Performance. V-20iT/V-40iT/V-60iT 5 Axes Machining Center LEADWELL CNC MACHINES MFG., CORP.
The Ultimate in Performance V-2iT/V-4iT/V-6iT 5 Axes Machining Center LEADWELL CNC MACHINES MFG., CORP. No. 23 Gong 33th Road, Taichung Industrial Park Taichung 47, Taiwan T: 886-4 - 29188 / F: 886-4 -
More informationAugust 7, 2014 i 50 High-Speed Horizontal Machining Center for Mass Production Revolutionizing Automotive Parts Machining
Press Release Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1811 FAX: +81(0)52-587-1818 August 7, 2014 i 50 High-Speed Horizontal Machining Center for Mass Production
More informationDuraTurn Series. CNC Lathe. для получения подробной информации, пожалуйста, напишите нам на почту
DuraTurn 2030 DuraTurn 2050 DuraTurn 2550 CNC Lathe DuraTurn Series Durable Universal Reliable Affordable Accurate CNC Lathe with Excellent Operability and Machining Capability The DuraTurn series, which
More informationTruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology
TruLaser Tube: Optimal tube and profile cutting Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser tube processing. The TRUMPF Group ranks among
More informationX.mill 900 L. X.mill 900 L. CNC Vertical Machining Center. Universal Machining Center with customized options.
CNC Vertical Machining Center Universal Machining Center with customized options GPlus 450 or Siemens 828D CNC control with touch screen technology, plus USB port Travel X axis 850 mm Y axis 550 mm Z axis
More informationVERTICAL MACHINING CENTRES
Chester Machine Tools VERTICAL MACHINING CENTRES Contents Production and Inspection 2-3 Control 4 Hand Scraping 4 Structural Design 5 CNC Controller 6 Mini Centre 7-8 T6 Tapping Machine 9-10 V6 Machining
More informationMiyano Evolution Line
Evolution Line CNC Turning center with 2 spindles, 2 turrets and 1 -axis slide BNJ-34/42/51 "Evolution and Innovation" is the Future What could not be done can be done. -axis movement is added to the traditional
More informationMILLING Bridgeport GX Machining Center
MILLING Bridgeport GX 1600-50 Machining Center Quotation to: Quotation Number: Contact: Address: ABMNameAlpha SOHDocumentOrderInvoice Contact Name ShipToAddressLine1 ShipToAddressLine2 ShipToAddressLine3
More informationEquipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02. 3D Printer Specifications
Equipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02 Tech Specifications 3D Printer Specifications Print size (X Y Z) (Not less than) 600 x 300 x 300 mm Print Speed- Range 55-75 mm/sec Layer Resolution
More informationKDL 30M HORIZONTAL TURNING CENTER
HORIZONTAL TURNING CENTER with LIVE TOOLING KEY FEATURES 12 Chuck BOX Ways Turret Style Tooling Slant Bed Construction Live Tooling Maximum Swing 610mm (24.02 ) Maximum Cutting Diameter 420mm (16.54 )
More informationSAMSUNG Machine Tools PL2000SY CNC TURNING CENTER
SAMSUNG Machine Tools CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 30 degree slant bed
More informationDRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
More informationKOMAUU TOMORROW'S TECHNOLOGY TODAY TWISTER SERIES
KOMAUU TOMORROW'S TECHNOLOGY TODAY TWISTER SERIES Twister high quality cutting machine with productivity exceeding laser Production lots and delivery times are indeterminable factors for the manufactu
More informationAE-200A Series. AE-200A Series. This is an edge control seamer which automatically produces beautiful "seams" on materials in diversified designs.
AE-200A Series Edge Control Seamer AE-200ALA AE-200ALD Join materials type Pin tuck type AE200ALAAA5 This is an edge control seamer which automatically produces beautiful "seams" on materials in diversified
More informationProduct Brochure For S884S. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
APHS-31120 - Hydraulic CNC Pressbrake 120T, 7 Axis, Delem DA69T Touch Screen Control Includes Programmable X, Y1, Y2, V, Z1, Z2 & R-Axis. CNC Table Crowning, Laser Guarding System & Rolleri ROL200 Quick
More informationSAMSUNG Machine Tools
NC Unit Specifications / FANUC Series Item Specification 0i-TD 32i-B i SAMSUNG Machine Tools PL 2000Y/SY PL 2500Y/SY SMEC Co., Ltd. 157-10, Goldenroot-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, Korea
More informationMU TechSeries 5-Axis Machining Center
MU TechSeries 5-Axis Machining Center jyoti. co.in MU Tech Series 5-Axis Machining Center OVERVIEW The MU Tech Series machines offers a one stop solution of versatile milling operations with geometrical
More information5500 CNC Lathe Systems (Heavy Duty)
5500 CNC Lathe Systems (Heavy Duty) LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 04/2018 Table of Contents General Description 2 Features & Benefits 3 List of Available Training Systems 3 Additional
More informationWeeke Machining Center, Model BP-100 Optimat
This PDF file has not been verified for accuracy. BEFORE BIDDING, all bidders should use the inspection period to verify specifications. Weeke Machining Center, Model BP-100 Optimat Weeke's BP-100 is a
More informationCare and Maintenance of Milling Cutters
The Milling Machine Care and Maintenance of Milling Cutters The life of a milling cutter can be greatly prolonged by intelligent use and proper storage. Take care to operate the machine at the proper speed
More information