5500 CNC Lathe Systems (Heavy Duty)

Transcription

1 5500 CNC Lathe Systems (Heavy Duty) LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 04/2018

2 Table of Contents General Description 2 Features & Benefits 3 List of Available Training Systems 3 Additional Equipment Required to Perform the Exercises 3 Optional Equipment 4 Available Training Systems 4 Equipment Description 7 Optional Equipment Description 10 General Description The CNC Lathe Training Systems provide training in computer-aided design (CAD) and computer-aided manufacturing (CAM) using an industrial-grade microprocessor-driven CNC lathe. The systems allow students to practice computer numerical controlled (CNC) code programming and editing, learn to operate lathe components, controls, and tools, set a programmed reference zero, follow the steps necessary to turn a specified part, and apply the machine code language to current lathe technology. The CNC lathe consists of a horizontal lathe constructed with a cast-iron bed, headstock, and tailstock. The lathe uses two ball screws, each driven by a stepper motor, to move the cross slide that carries the cutting tool along the Z axis (right and left) and X axis (in and out) with maximal positional accuracy. The speed of each stepper motor can be programmed separately for feed rates up to 762 mm/min (30 in/min). A 746 W (1.0 hp) motor rotates the spindle and three-jaw chuck, and thus the stock, at speeds programmable up to 3400 r/min. To facilitate maintenance, the Z-axis ball screw is protected by a dust cover. The CNC lathe can machine pieces of soft materials such as plastic and wax, as well as harder materials such as aluminum, mild steel, and brass. Pieces can be turned into a variety of cylindrical bumps, grooves, and hollows. The CNC lathe is capable of threading using an optical-encoder feedback loop. A computer is used to create NC part programs with G and M machine codes or their conversational code equivalents. The created programs are downloaded to the on-board microprocessor of the CNC lathe, which stores and executes them. Since the CNC lathe connects directly to the serial or Ethernet port of a computer, or directly to a network, no additional interface card is required. The computer is free to be used for any additional applications since it is not dedicated to the control of the lathe. The CNC lathe is designed for use with the included CNC Lathe Software, Model This Windows -based software permits creation of G and M code part programs for download to the CNC lathe. It features CAD/CAM design and tool path emulation, which allow students to create part drawings, set up the tool paths and cut steps, and create a part program to simulate tool motion on a monitor in order to verify NC code and the finished part prior to the actual cutting. Canned cycles can be programmed. The software can import NC part programs created with other CAM programs that support G and M codes. The CNC lathe features a control panel that allows manual operation. This panel includes a multiple-line LCD display, an easy-to-use membrane keypad, an error indicator/pause button, and a key-released emergency stop push button. The lathe parameters, including the spindle speed, the feed rate, the reference point, and the X and Z axes coordinates of the cutting tool, are adjusted by accessing different menus. During the turning, the control panel displays the X and Z axes coordinates of the cutting tool, the feed rate, and the spindle speed. The CNC lathe is designed for maximum safety. A safety door provides protection during machining. Magnetic interlocks located on this door stop the spindle and the axes if the door is opened during machining. Limit 2 Festo Didactic

3 switches prevent the bed from over-traveling and the cutting tool from crashing into the chuck. Pressing the emergency stop push button on the control panel cuts off the power to the spindle motor and stops the axes. The CNC lathe supports low-voltage communications with robotic units. For this purpose, the CNC lathe features a 15-pin TTL/IO port providing four 5 V digital inputs and four 5 V digital outputs for TTL communication to an automation work cell. The CNC lathe also features a 5-pin solenoid driver port providing connections for up to four auxiliary devices. The TTL/IO and solenoid driver ports are M code supported through the CNC Lathe Software, Model The CNC Lathe Training Systems comprise the accessories, software, and cable required for lathe operation. These include a carbide insert cutting tool, two cutting tools (AR6 and E6 type), pieces of machinable industrial stocks, a serial cable, a cross-over Ethernet cable, and a copy of the CNC Lathe Software, Model The training systems also include two user guides. The first user guide allows students to acquire experience with the equipment commonly found in automated manufacturing environments. The second user guide covers the operation of the CNC Lathe Software. Various assortments of machining tools and stock materials of different sizes are offered as options to enhance and expand system capabilities. Features & Benefits Key-released emergency stop push button Ability to restart programs from stopping point after safety interruption On-board embedded microprocessor Computer free to be used for other applications since it is not dedicated to the control of the lathe Using optical encoder feedback, the lathe is also capable of threading An optional 10-tool automatic tool changer is available Stand-alone manual mode operation Batch mode for independent operation or operation in CIM cells Software allowing the programming of up to 10 tools 745 W (1 hp) constant-torque dc spindle motor Three-jaw self-centering chuck Cast iron chassis Recirculating industrial-grade ball nuts and screws on X and Z axes Magnetic safety interlock Quick-change tool post List of Available Training Systems Qty Description Model 1 CNC Lathe Training System (Heavy Duty) CNC Lathe Training System (Heavy Duty) with Automatic Tool Changer Additional Equipment Required to Perform the Exercises Qty Description Model 1 1 Personal Computer Training on Familiarization with the CNC Lathe, 0.8 day TF 1 Refer to the Computer Requirements in the software section of this datasheet if the computer is to be provided by the end-user. 2 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. Festo Didactic 3

4 Optional Equipment Qty Description Model 1 Black and White Acetal Turning Stock Set Black Acetal Turning Stock Set White Acetal Turning Stock Set Aluminum Turning Stock Set Brass Turning Stock Set Aluminum Turning Stock Set Four-Jaw Chuck mm (3/8 in) Standard Carbide Tool Set Parting Tool Set External Threading Tool Indexable Boring Tools Heavy-Duty Drill Chuck Machining Kit Automatic Tool Changer CNC Lathe Software - 1 User Live Center Available Training Systems CNC Lathe Training System (Heavy Duty) The CNC Lathe Training System provide training in computer-aided design (CAD) and computer-aided manufacturing (CAM) using an industrial-grade microprocessordriven CNC lathe. The systems allow students to practice computer numerical controlled (CNC) code programming and editing, learn to operate lathe components, controls, and tools, set a programmed reference zero, follow the steps necessary to turn a specified part, and apply the machine code language to current lathe technology. The CNC lathe consists of a horizontal lathe constructed with a cast-iron bed, headstock, and tailstock. The lathe uses two ball screws, each driven by a stepper motor, to move the cross slide that carries the cutting tool along the Z axis (right and left) and X axis (in and out) with maximal positional accuracy. The speed of each stepper motor can be programmed separately for feed rates up to 762 mm/min (30 in/min). A 746 W (1.0 hp) motor rotates the spindle and three-jaw chuck, and thus the stock, at speeds programmable up to 3400 r/min. To facilitate maintenance, the Z-axis ball screw is protected by a dust cover. The CNC lathe can machine pieces of soft materials such as plastic and wax, as well as harder materials such as aluminum, mild steel, and brass. Pieces can be turned into a variety of cylindrical bumps, grooves, and hollows. The CNC lathe is capable of threading using an optical-encoder feedback loop. A computer is used to create NC part programs with G and M machine codes or their conversational code equivalents. The created programs are downloaded to the on-board microprocessor of the CNC lathe, which 4 Festo Didactic

5 stores and executes them. Since the CNC lathe connects directly to the serial or Ethernet port of a computer, or directly to a network, no additional interface card is required. The computer is free to be used for any additional applications since it is not dedicated to the control of the lathe. The CNC lathe is designed for use with the included CNC Lathe Software, Model This Windows -based software permits creation of G and M code part programs for download to the CNC lathe. It features CAD/CAM design and tool path emulation, which allow students to create part drawings, set up the tool paths and cut steps, and create a part program to simulate tool motion on a monitor in order to verify NC code and the finished part prior to the actual cutting. Canned cycles can be programmed. The software can import NC part programs created with other CAM programs that support G and M codes. The CNC lathe features a control panel that allows manual operation. This panel includes a multiple-line LCD display, an easy-to-use membrane keypad, an error indicator/pause button, and a key-released emergency stop push button. The lathe parameters, including the spindle speed, the feed rate, the reference point, and the X and Z axes coordinates of the cutting tool, are adjusted by accessing different menus. During the turning, the control panel displays the X and Z axes coordinates of the cutting tool, the feed rate, and the spindle speed. The CNC lathe is designed for maximum safety. A safety door provides protection during machining. Magnetic interlocks located on this door stop the spindle and the axes if the door is opened during machining. Limit switches prevent the bed from over-traveling and the cutting tool from crashing into the chuck. Pressing the emergency stop push button on the control panel cuts off the power to the spindle motor and stops the axes. The CNC lathe supports low-voltage communications with robotic units. For this purpose, the CNC lathe features a 15-pin TTL/IO port providing four 5 V digital inputs and four 5 V digital outputs for TTL communication to an automation work cell. The CNC lathe also features a 5-pin solenoid driver port providing connections for up to four auxiliary devices. The TTL/IO and solenoid driver ports are M code supported through the CNC Lathe Software, Model The CNC Lathe Training Systems comprise the accessories, software, and cable required for lathe operation. These include a carbide insert cutting tool, two cutting tools (AR6 and E6 type), pieces of machinable stocks, a serial cable, a cross-over Ethernet cable, and a copy of the CNC Lathe Software, Model The training systems also include two user guides. The first user guide allows students to acquire experience with the equipment commonly found in automated manufacturing environments. The second user guide covers the operation of the CNC Lathe Software. Various assortments of machining tools and stock materials of different sizes are offered as options to enhance and expand system capabilities. List of Equipment Qty Description Model 1 Black and White Acetal Turning Stock Set CNC Lathe 5500-B5 1 CNC Lathe Software - 1 User List of s Description CNC Lathe Software (User Guide) E0 Familiarization with the CNC Lathe (User Guide) E0 Festo Didactic 5

6 Table of Contents of the (s) CNC Lathe Software (User Guide) (36188-E0) 0 Installation of the CNC Lathe/Mill Software 1 Overview of the CNC Lathe Software 2 Menus 3 The Part Program Editors 4 Tutorial Exercises Familiarization with the CNC Lathe (User Guide) (36784-E0) 1 Installation 2 Operation 3 Tutorial Exercise System Power Requirements Current Service Installation Physical Characteristics Intended Location Dimensions (H x W x D) Net Weight 10 A Standard single-phase ac outlet On a table able to support the weight of the equipment 330 x 914 x 597 mm (13 x 36 x 23.5 in) 77 kg (170 lb) CNC Lathe Training System (Heavy Duty) with Automatic Tool Changer The CNC Lathe Training System (Heavy Duty) with Automatic Tool Changer is identical to the CNC Lathe Training System, Model , with the addition of an automatic tool changer (ATC) mounted on the lathe. The ATC can hold up to ten tools and allows students to execute part programs without stopping the CNC lathe for tool changes. List of Equipment Qty Description Model 1 Black and White Acetal Turning Stock Set CNC Lathe 5500-B5 1 Automatic Tool Changer CNC Lathe Software - 1 User List of s Description Automatic Tool Changer (Instruction ) D0 CNC Lathe Software (User Guide) E0 Familiarization with the CNC Lathe (User Guide) E0 Table of Contents of the (s) Automatic Tool Changer (Instruction ) (34396-D0) 1 Description 2 6 Festo Didactic

7 3 Installation and Adjustment Instructions 4 Operation of the ATC 5 Tool Installation and Offset Instructions 6 Routine Maintenance CNC Lathe Software (User Guide) (36188-E0) 0 Installation of the CNC Lathe/Mill Software 1 Overview of the CNC Lathe Software 2 Menus 3 The Part Program Editors 4 Tutorial Exercises Familiarization with the CNC Lathe (User Guide) (36784-E0) 1 Installation 2 Operation 3 Tutorial Exercise System Power Requirements Current Service Installation Physical Characteristics Intended Location Dimensions (H x W x D) Net Weight 10 A Standard single-phase ac outlet On a table able to support the weight of the equipment 330 x 914 x 597 mm (13 x 36 x 23.5 in) TBE Equipment Description Black and White Acetal Turning Stock Set The Black and White Acetal Turning Stock Set includes fifty black acetal turning stocks and fifty white acetal turning stocks. Each stock has the following dimensions: 19 mm (0.75 in) in diameter, 76.2 mm (3 in) in length. Quantity White Stocks 50 Black Stocks 50 Dimensions (Diameter x Length) 19 x 76.2 mm (0.75 x 3 in) CNC Lathe 5500-B5 The CNC Lathe consists of a horizontal lathe constructed with a cast-iron bed, headstock, and tailstock. The lathe uses two ball screws, each driven by a stepper motor, to move the cross slide that carries the cutting tool along the Z axis (right and left) and X axis (in and out) with maximal positional accuracy. Festo Didactic 7

8 The speed of each stepper motor can be programmed separately for feed rates up to 762 mm/min (30 in/min). A 746 W (1.0 hp) motor rotates the spindle and three-jaw chuck, and thus the stock, at speeds programmable up to 3400 r/min. To facilitate maintenance, the Z-axis ball screw is protected by a dust cover. The CNC lathe can machine pieces of soft materials such as plastic and wax, as well as harder materials such as aluminum, mild steel, and brass. Pieces can be turned into a variety of cylindrical bumps, grooves, and hollows. The CNC lathe is capable of threading using an optical-encoder feedback loop. Description Familiarization with the CNC Lathe (User Guide) E0 Table of Contents of the (s) Familiarization with the CNC Lathe (User Guide) (36784-E0) 1 Installation 2 Operation 3 Tutorial Exercise Power Requirement Current Service Installation Lathe Swing over Bed Center Height (from base pan) Distance Between Centers Swing over Cross Slide Travel of Cross Slide Repeatability Resolution Headstock Spindle Bore Tailstock 10 A Standard single-phase ac outlet 130 mm (5.1 in) 142 mm (5.6 in) 279 mm (11 in) 48 mm (1.9 in) 51 mm (2 in) mm (± in) mm (± in) 15.8 mm (0.62 in) Tailstock Taper Morse no 1 Sleeve Stroke Main Spindle Drive Programmable Speed Range Motor Feed Motors Type Resolution Rapid Traverse Speed Carbide Tool Set Types Carbide Insert Tool Tool Holders Tool Post Type Null Modem Serial Cable Length Connectors TTL/IO Cable Length Connectors Ethernet Crossover Cable 34.8 mm (1.37 in) r/min 746 W (1.0 hp), overload protected Stepper 400 steps/rev 762 mm (30 in/min) AR6 and E6 55 right-hand insert Two for turning and facing operations Quick-change 3.05 m (10 ft) DB9 female/female 3.05 m (10 ft) DB15 male/male 8 Festo Didactic

9 Length Connectors Three-Jaw Chuck Type Diameter Hole Size Tool Set Content Physical Characteristics Intended Location Dimensions (H x W x D) Net Weight 2.13 m (7 ft) RJ45 male/male Self-centering, two sets of jaws mm (4 in) 20 mm ( in) Hex keys, wrench, cleaning brush, and digital caliper 330 x 914 x 597 mm (13 x 36 x 23.5 in) 77 kg (170 lb) Automatic Tool Changer The Automatic Tool Changer has a rotary turret with ten alternately spaced tool positions. Five of those are for external turning tools, with a 9.5 mm (0.375 in) square shank. The five others are for drilling, boring, and internal threading tools, with a 9.5 mm (0.375 in) diameter round shank. The tool-to-tool indexing time of the rotary turret is 3 seconds. Its maximum tool protrusion is mm (0.750 in) for a square shank and mm (4 in) for a round shank. The turret has a diameter of 127 mm (5 in) and a thickness of 25.4 mm (1 in). The Automatic Tool Changer has a position repeatability of ± mm / ± in (± ) and a tool-totool repeatability of ±0.051 mm / ±0.002 in (±0.056 ). Description Automatic Tool Changer (Instruction ) D0 Table of Contents of the (s) Automatic Tool Changer (Instruction ) (34396-D0) 1 Description 2 3 Installation and Adjustment Instructions 4 Operation of the ATC 5 Tool Installation and Offset Instructions 6 Routine Maintenance Rotary Turret Number of Tool Positions 10 Position Details 5 for external turning tools, 9.5 mm (0.375 in) square shank, alternately-spaced Festo Didactic 9

10 5 for drilling, boring, and internal threading tools, 9.5 mm (0.375 in) dia. round shank, alternately-spaced Tool-to-Tool Indexing Time 3 sec. Maximum Tool Protrusion Square-shank: mm (0.750 in) Round-shank: mm (4 in) Turret Diameter 127 mm (5 in) Turret Thickness 25.4 mm (1 in) Repeatability Position ± mm / ± in (±0.007 ) Tool-to-Tool ±0.051 mm / ±0.002 in (±0.056 ) CNC Lathe Software - 1 User Additional licenses are available. The CNC Lathe Software is a Windows -based software that features a parametric-based graphical tool editor, a 3D tool path emulator, and an easy-to-use graphical interface. The software can import NC part programs created using other CAM software CAM that support the G and M codes. Description CNC Lathe Software (User Guide) E0 Table of Contents of the (s) CNC Lathe Software (User Guide) (36188-E0) 0 Installation of the CNC Lathe/Mill Software 1 Overview of the CNC Lathe Software 2 Menus 3 The Part Program Editors 4 Tutorial Exercises Licenses Number of Users 1, 5, 10, 15, 20, 25, 30, or 35 Computer Requirements Optional Equipment Description A currently available personal computer with USB 2.0 ports, running under one of the following operating systems: Windows 7 or Windows 8. Black and White Acetal Turning Stock Set (Optional) The Black and White Acetal Turning Stock Set includes fifty black acetal turning stocks and fifty white acetal turning stocks. Each stock has the following dimensions: 19 mm (0.75 in) in diameter, 76.2 mm (3 in) in length. 10 Festo Didactic

11 Quantity White Stocks 50 Black Stocks 50 Dimensions (Diameter x Length) 19 x 76.2 mm (0.75 x 3 in) Black Acetal Turning Stock Set (Optional) The Black Acetal Turning Stock Set includes 100 black acetal turning stocks. Each stock has the following dimensions: 19 mm (0.75 in) in diameter, 76.2 mm (3 in) in length. Quantity Black Stocks 100 Dimensions (Diameter x Length) 19 x 76.2 mm (0.75 x 3 in) White Acetal Turning Stock Set (Optional) The White Acetal Turning Stock Set includes 100 white acetal turning stocks. Each stock has the following dimensions: 19 mm (0.75 in) in diameter, 76.2 mm (3 in) in length. Quantity White Stocks 100 Dimensions (Diameter x Length) 19 x 76.2 mm (0.75 x 3 in) Aluminum Turning Stock Set (Optional) The Aluminum Turning Stock Set includes 100 aluminum turning stocks. Each stock has the following dimensions: 19 mm (0.75 in) in diameter, 50.8 mm (2 in) in length. Quantity Aluminum Stocks 100 Dimensions (Diameter x Length) 19 x 50.8 mm (0.75 x 2 in) Brass Turning Stock Set (Optional) The Brass Turning Stock Set includes 25 brass turning stocks. Each stock has the following dimensions: 12.7 mm (0.5 in) in diameter, 76.2 mm (3 in) in length. Quantity Brass Stocks 25 Dimensions (Diameter x Length) 12.7 x 76.2 mm (0.5 x 3 in) Festo Didactic 11

12 Aluminum Turning Stock Set (Optional) The Aluminum Turning Stock Set includes 100 aluminum turning stocks. Each stock has the following dimensions: 12.7 mm (0.5 in) in diameter, 63.5 mm (2.5 in) in length. Quantity Aluminum Stocks 100 Dimensions (Diameter x Length) 12.7 x 63.5 mm (0.5 x 2.5 in) Four-Jaw Chuck mm (3/8 in) (Optional) The Four-Jaw Chuck is a four-jaw chuck with each jaw independent and reversible. It has a diameter of 88.9 mm (3.5 in). Type Diameter Physical Characteristics Net Weight Each jaw is independent and reversible 88.9 mm (3.5 in) 1.55 kg (3.4 lb) Standard Carbide Tool Set (Optional) The Standard Carbide Tool Set contains carbide tools of the following types: AR6, BR6, D6, E6, C6, BL6, and AL6. Types AR6, BR6, D6, E6, C6, BL6, and AL6 Parting Tool Set (Optional) The Parting Tool Set includes the following equipment: A tool holder for 12.7 mm (0.5 in) high parting-off blades A parting-off blade with a height of 12.7 mm (0.5 in) and made of HSS Tool Holder Type Parting-off Blade Blade Height Material For 12.7 mm (0.5 in) high parting-off blade 12.7 mm (0.5 in) HSS 12 Festo Didactic

13 External Threading Tool (Optional) The External Threading Tool includes the following equipment: A carbide insert: right-handed, inscribed circle (I.C.) of 9.5 mm (0.375 in), tip-included angle of 60, pitch range of mm (1/16-1/48 in) A tool holder for 9.5 mm (0.375 in) I.C. inserts with an helix angle of 1.5 Carbide Insert Hand Right Inscribed Circle (I.C.) 9.5 mm (0.375 in) Tip Included Angle 60 Pitch Range mm (1/16-1/48 in) Tool Holder Insert Size For 9.5 mm (0.375 in) I.C. inserts Helix Angle 1.5 Indexable Boring Tools (Optional) The Indexable Boring Tool includes the following equipment: A carbide insert with 3 cutting edges of the type TPEE-730 A boring bar that fits TPEE-730 inserts Carbide Insert Cutting Edges 3 Type TPEE-730 boring insert Boring Bar Type Fits TPEE-730 inserts Heavy-Duty Drill Chuck (Optional) The Heavy-Duty Drill Chuck consists of a Jacob No. 2 arbor drill chuck having a capacity of mm ( in). Its taper is of the Morse No. 1 type. Chuck Festo Didactic 13

14 Capacity mm ( in) Type Fits Jacob No. 2 arbor Arbor Chuck Taper Morse No. 1 Machining Kit (Optional) The Machining Kit contains the following: A four-jaw chuck, Model 5501 A live center, Model Carbide tools of the following types: AR6, BR6, BR7, D6, E6, C6, BL6, AL6 Morse no. 1 Taper-shank Drill Tools of various diameters (see ) A parting tool set, Model A size-3 center drill An indexable boring tool, Model 5507 A drill chuck, Model 5510 Four-Jaw Chuck Live Center Carbide Tools Types Morse no. 1 Taper-shank Drill Tools Diameters Parting Tool Set Center Drill Body Diameter Drill Diameter Size No. 3 Indexable Boring Tool Drill Chuck See Model 5501 for the details See Model for the details AR6, BR6, BR7, D6, E6, C6, BL6, AL mm ( in), 3.18 mm (0.125 in), 4.76 mm ( in), 6.35 mm (0.25 in), 7.94 mm ( in), 9.53 mm (0.375 in), mm ( in), and 12.7 mm (0.5 in) See Model for the details 6.35 mm (0.25 in) 2.78 mm ( in) See Model 5507 for the details See Model 5510 for the details Automatic Tool Changer (Optional) The Automatic Tool Changer has a rotary turret with ten alternately spaced tool positions. Five of those are for external turning tools, with a 9.5 mm (0.375 in) square shank. The five others are for drilling, boring, and internal threading tools, with a 9.5 mm (0.375 in) diameter round shank. The tool-to-tool indexing time of the rotary turret is 3 seconds. Its maximum tool protrusion is mm (0.750 in) for a square shank and mm (4 in) for a round shank. The turret has a diameter of 127 mm (5 in) and a thickness of 25.4 mm (1 in). 14 Festo Didactic

15 The Automatic Tool Changer has a position repeatability of ± mm / ± in (± ) and a tool-totool repeatability of ±0.051 mm / ±0.002 in (±0.056 ). Description Automatic Tool Changer (Instruction ) D0 Table of Contents of the (s) Automatic Tool Changer (Instruction ) (34396-D0) 1 Description 2 3 Installation and Adjustment Instructions 4 Operation of the ATC 5 Tool Installation and Offset Instructions 6 Routine Maintenance Rotary Turret Number of Tool Positions 10 Position Details Tool-to-Tool Indexing Time Maximum Tool Protrusion Turret Diameter Turret Thickness Repeatability 5 for external turning tools, 9.5 mm (0.375 in) square shank, alternately-spaced 5 for drilling, boring, and internal threading tools, 9.5 mm (0.375 in) dia. round shank, alternately-spaced 3 sec. Square-shank: mm (0.750 in) Round-shank: mm (4 in) 127 mm (5 in) 25.4 mm (1 in) Position ± mm / ± in (±0.007 ) Tool-to-Tool ±0.051 mm / ±0.002 in (±0.056 ) CNC Lathe Software - 1 User (Optional) Additional licenses are available. The CNC Lathe Software is a Windows -based software that features a parametric-based graphical tool editor, a 3D tool path emulator, and an easy-to-use graphical interface. The software can import NC part programs created using other CAM software CAM that support the G and M codes. Description CNC Lathe Software (User Guide) E0 Festo Didactic 15

16 Table of Contents of the (s) CNC Lathe Software (User Guide) (36188-E0) 0 Installation of the CNC Lathe/Mill Software 1 Overview of the CNC Lathe Software 2 Menus 3 The Part Program Editors 4 Tutorial Exercises Licenses Number of Users 1, 5, 10, 15, 20, 25, 30, or 35 Computer Requirements A currently available personal computer with USB 2.0 ports, running under one of the following operating systems: Windows 7 or Windows 8. Personal Computer (Optional) The Personal Computer consists of a desktop computer running under Windows 10. A monitor, keyboard, and mouse are included. Power Requirements Current Service Installation 1.05 A Standard single-phase ac outlet Live Center (Optional) The Live Center consists of a heavy-duty live center specially designed for high-weight workpieces. Taper Morse No Festo Didactic

17 Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc All rights reserved. Festo Didactic SE Rechbergstrasse Denkendorf Germany P. +49(0)711/ F. +49(0)711/ Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ United States P F Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P F Festo Didactic 17