CNC Mill Training System (Light Duty)
|
|
- Dorothy Kelly
- 5 years ago
- Views:
Transcription
1 CNC Mill Training System (Light Duty) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018
2 Table of Contents General Description 2 Features & Benefits 2 List of Equipment 3 List of Manuals 3 Table of Contents of the Manual(s) 3 Additional Equipment Required to Perform the Exercises 3 Optional Equipment 3 System 4 Equipment Description 4 Optional Equipment Description 9 General Description The CNC Mill Training System provides training in computer-aided manufacturing (CAM) using a microprocessor-driven, light-duty CNC mill. The system allows students to practice computer numerical controlled (CNC) code programming and editing, learn to operate mill components, controls, and tools, set a programmed reference zero, follow the steps necessary to machine a part to programmed specifications, and apply the machine code language to current mill technology. A computer is used to create NC part programs with the G and M machine codes or their conversational code equivalents. The created programs are downloaded to the on-board microprocessor of the CNC mill, which stores and executes them. Since the CNC mill connects directly to the serial or Ethernet port of a computer, or directly to a network, no additional interface card is required. The computer is free to be used for any additional applications, since it is not dedicated to the control of the mill. The CNC Mill Training System comprises the accessories, software, and cables required for system operation. These include a vise, a basic milling set, 100 blocks of industrial machinable wax, a serial cable, a cross-over Ethernet cable, and the CNC Mill Software, Model The training system also includes two user guides. The first user guide allows students to acquire experience with the equipment commonly found in automated manufacturing environments. The second user guide covers the operation of the CNC Mill Software. Various assortments of milling tools and stock materials of different sizes are offered as options to enhance and expand system capabilities. Features & Benefits Key-released emergency stop push button Ability to restart programs from stopping point after safety interruption On-board embedded microprocessor Computer free to be used for other applications since it is not dedicated to the control of the mill Stand-alone manual mode operation Batch mode for independent operation or operation in CIM Cells Software included with full 3D tool path emulator and easy-to-use graphical interface allowing the programming of up to twenty tools 12-key membrane keypad with 20-character by 4-line LCD display Feed-rate and spindle-speed override capability Removable side panel for access to robot 2 Festo Didactic
3 Connects to host computer through RS-232 or Ethernet port List of Equipment Qty Description Model number 1 CNC Mill (Light Duty) 5400-B0 1 Wax Milling Stock Set Fabricus Software (Domestic Market) - 1 User CNC Mill Software - 1 User List of Manuals Manual Description number CNC Mill Software (User Guide) E0 Fabricus (Quick Start Guide) E0 CNC Mill (Light Duty) (User Guide) E0 Table of Contents of the Manual(s) CNC Mill Software (User Guide) (36189-E0) 0 Installation of the CNC Lathe/Mill Software 1 Overview of the CNC Mill Software 2 Menus 3 The Part Program Editors 4 Tutorial Exercises Fabricus (Quick Start Guide) (37863-E0) 0 Introduction 1 Installation 2 Using Fabricus Software 3 Creating Parts CNC Mill (Light Duty) (User Guide) (39547-E0) 1 Overview and Installation 2 Tools and Accessories 3 Using the Mill Interface 4 Milling Stock 5 Tutorial Exercise 6 Maintenance Additional Equipment Required to Perform the Exercises Model Qty Description number 1 1 Personal Computer Optional Equipment 1 Refer to the Computer Requirements in the software section of this datasheet if the computer is to be provided by the end-user. Festo Didactic 3
4 Qty Description Model number 1 Wax Milling Stock Set Wax Milling Stock Set Plexiglass Milling Stock Set Plexiglass Milling Stock Set Engraving Plate Set Plexiglass Milling Stock Set Aluminum Milling Stock Set End Mill Set Intermediate Milling Set Engraver Tool Set (Project Lead the Way) Pneumatic Vise Plexiglass Milling Stock Set Mill Tool Set Hold-Down Set Mill Vise System Power Requirements Current Service Installation Physical Characteristics Intended Location (H x W x D) Net Weight 2 A Standard single-phase ac outlet On a table able to support the weight of the equipment 750 x 864 x 597 mm (29.5 x 34 x 23.5 in) 70.3 kg (155 lb) Equipment Description CNC Mill (Light Duty) 5400-B0 The CNC Mill can machine pieces of soft materials such as wax and plexiglass, as well as harder materials such as aluminum and brass. It consists of a milling table, a headstock carrying the spindle motor, and a vertical column with dovetail slide. The stock can either be mounted directly on the mill table or secured in a vise that holds it to the table. Two lead screws, each driven by a stepper motor, are used to move the table along the X axis (left and right) and Y axis (backward and forward) to feed the stock through the periphery of the end mill. A third lead screw, also driven by a stepper motor, is used to move the headstock along the Z axis (up and down) for positioning the end mill. The speed of each stepper motor can be programmed separately for feed rates of up to 356 mm/min (14 in/min). A 60 W (0.08 hp) motor rotates the spindle at speeds 2 Requires compressed air 4 Festo Didactic
5 programmable up to 2800 r/min. The end mill can be changed to accommodate different stock materials and milling designs. The CNC Mill features a control panel that allows manual operation. This panel includes a multiple-line LCD display, an easy-to-use membrane keypad, an error indicator/pause button, and a key-released emergency stop push button. The mill parameters, including the spindle speed, the feed rate, the reference point, and the X, Y, and Z axes coordinates can be set by accessing different menus. During the machining, the control panel displays the X, Y, and Z axes coordinates, as well as the current feed and spindle speed. The CNC Mill is designed for maximum safety. A safety door provides protection during machining. Magnetic interlocks located on this door stop the spindle and the axes if the door is opened during machining. Limit switches prevent over-travel of the spindle and table of the mill. Pressing the emergency stop push button on the control panel powers off the spindle motor and stops the axes. The CNC Mill supports low-voltage communications with robotic units to allow students to create automated work cells, ideal for implementing computer-integrated manufacturing (CIM). For this purpose, the CNC Mill features a 15-pin TTL/IO port providing four 5 V digital inputs and four 5 V digital outputs for TTL communication to an automation work cell. This port can be connected, for example, to the Servo-Robot, Model 5250, offered as an option to achieve automatic loading and unloading of the stock with a robot arm. The CNC Mill also features a 5-pin solenoid driver port providing connections for up to four auxiliary devices. This port can be connected, for example, to the pneumatic control box of the optional Pneumatic Vise, Model 5434, to achieve automatic clamping and unclamping of the stock loaded in the CNC Mill. The TTL/IO and solenoid driver ports of the CNC Mill are M-code supported through the CNC Mill Software, Model Manual Manual Description number CNC Mill (Light Duty) (User Guide) E0 Table of Contents of the Manual(s) CNC Mill (Light Duty) (User Guide) (39547-E0) 1 Overview and Installation 2 Tools and Accessories 3 Using the Mill Interface 4 Milling Stock 5 Tutorial Exercise 6 Maintenance Power Requirements Current Service Installation Mechanical Working Range X Axis (Longitudinally) Y (Transversely) Z Axis (Vertically) Positioning Repeatability Resolution Milling Table Surface 2 A Standard single-phase ac outlet 184 mm (7.25 in) 102 mm (4 in) 159 mm (6.25 in) ±0.025 mm (±0.001in) ± mm (± in) 69.9 x 330 mm (2.75 x 13 in) Festo Didactic 5
6 Hold-Down T Slots 6.35 mm (0.25 in) width, 38 mm (1.5-in) spacing Maximal Table-to-Spindle Clearance 203 mm (8 in) Cutting Spindle Throat Clearance 88.9 mm (3.5 in) Spindle Taper No. 1 Morse Spindle Nose Thread 0.75 in major diameter, 16 threads/in Main Spindle Drive Continuous Speed Range r/min Motor 60 W (0.08 hp) Feed Motors Type Stepper Resolution 400 steps/rev Rapid Traverse Speed 356 mm/min (14 in/min) Square Wood Shims x x 9.53 mm (1.875 x x in) Rectangular Wood Shim x 76.2 x 9.53 mm (6 x 3 x in) Plexiglass Block 127 x 63.5 x 9.53 mm (5 x 2.5 x 0.5 in) Engraving Plate Holder Maximal Holding x 50.8 x 3.18 mm (8 X 2 X in) Small Mill Vise Jaw Width 50.8 mm (2 in) Opening Between Jaws 50.8 mm (2 in) Accessories Two clamps with screws and T-nuts to attach to the mill table Large Mill Vise Jaw Width 70 mm (2.76 in) Opening Between Jaws mm (6 in) Accessories four screws with T-nuts to attach to the mill table Dial Indicator Set Range mm (0-1 in) Graduation mm (0.001 in) Accessories Lever-released magnetic base and adjustable clamps Null Modem Serial Cable Length 3.05 m (10 ft) Connectors DB9 female/female TTL/IO Cable Length 3.05 m (10 ft) Connectors DB15 male/male Ethernet Crossover Cable Length 2.13 m (7 ft) Connectors RJ45 male/male End Mills with Two Flutes Types: Square nose, 1 end, shank diameter of mm (3/8 in), mill diameter of mm (1/8 in) Square nose, 1 end, shank diameter of mm (3/8 in), mill diameter of 6.35 mm (1/4 in) Square nose, 2 ends, shank diameter of mm (3/16 in), mill diameter of mm (1/16 in) End Mills with Three Flutes Types: Ball nose, 1 end, shank diameter of 6.35 mm (1/4 in), mill diameter of mm (1/8 in) Square nose, 1 end, shank diameter of 6.35 mm (1/4 in), mill diameter of mm (1/8 in) Hold Down Set Two strap clamps with bolts, T-nuts, washers, and various lengths of socket head cap screws End Mill Holders See Model Edge Finder See Model Tool Set Hex keys, wrench, and cleaning brush Physical Characteristics Intended Location On a table able to support the weight of the equipment (H x W x D) 750 x 864 x 597 mm (29.5 x 34 x 23.5 in) Net Weight 70.3 kg (155 lb) 6 Festo Didactic
7 Wax Milling Stock Set The Wax Milling Stock Set includes 100 wax milling stocks. Each stock has the following dimensions: 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in). Additional sets can be ordered separately. Quantity Wax Milling Stocks x 50.8 x 12.7 mm (2 x 2 x 0.5 in) Fabricus Software (Domestic Market) - 1 User separately. The Fabricus Software is an entry level CAD/CAM software used to easily create G and M machine code files. These files can then be loaded to the appropriate location for compilation, emulation and cutting using the CNC Mill Software and CNC mill. The Fabricus Software is required to perform the exercises in the Tech- Design curriculum. Additional licenses can be ordered Manual Description Manual number Fabricus (Quick Start Guide) E0 Table of Contents of the Manual(s) Fabricus (Quick Start Guide) (37863-E0) 0 Introduction 1 Installation 2 Using Fabricus Software Festo Didactic 7
8 3 Creating Parts Features & Benefits Direct interface to CNC Mill Software Shows tool path and PRZ position Draw, move, rotate, and size shapes using either the mouse or a dialog box for further precision Text engraving Draws pockets, grooves, ellipse cups, and islands Outputs G and M code files Program feed, speed, and depth of pass Validation of tool paths given a tool diameter Tool library Licenses Number of Users 1, 5, 10, 15, 20 or 25 Computer Requirements A currently available personal computer with USB 2.0 ports, running under one of the following operating systems: Windows 7 or Windows 8. CNC Mill Software - 1 User Additional licenses are available. The CNC Mill Software is a 32-bit software that runs under Windows. It features a parametric-based graphical tool editor, a 3D tool path emulator, and an easy-to-use graphical interface. The software can import NC part programs created with other CAM programs that support the G and M codes. Manual Manual Description number CNC Mill Software (User Guide) E0 Table of Contents of the Manual(s) CNC Mill Software (User Guide) (36189-E0) 0 Installation of the CNC Lathe/Mill Software 1 Overview of the CNC Mill Software 2 Menus 3 The Part Program Editors 4 Tutorial Exercises 8 Festo Didactic
9 Licenses Number of Users 1, 5, 10, 15, 20, 25, 30, or 35 Computer Requirements Optional Equipment Description Wax Milling Stock Set (Optional) A currently available personal computer with USB 2.0 ports, running under one of the following operating systems: Windows 7 or Windows 8. The Wax Milling Stock Set includes 100 wax milling stocks. Each stock has the following dimensions: 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in). Quantity Wax Milling Stocks x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in) Plexiglass Milling Stock Set (Optional) The Plexiglass Milling Stock Set includes plexiglass milling stocks that have the following dimensions: 15 smaller rectangular milling stocks: 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in) 10 larger rectangular milling stocks: x 76.2 x 12.7 mm (6 x 3 x 0.5 in) 15 square milling stocks: 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in) Smaller Rectangular Milling Stocks Quantity 15 Larger Rectangular Milling Stocks Quantity 10 Square Milling Stocks Quantity x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in) x 76.2 x 12.7 mm (6 x 3 x 0.5 in) 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in) Plexiglass Milling Stock Set (Optional) The Plexiglass Milling Stock Set includes 100 plexiglass milling stocks. Each stock has the following dimensions: 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in). Quantity Plexiglass Milling Stocks x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in) Festo Didactic 9
10 Engraving Plate Set (Optional) The Engraving Plate Set includes 50 engraving plates. Each plate has the following dimensions: x 50.8 x 3.18 mm (8 x 2 x in). Quantity Engraving Plates x 50.8 x 3.18 mm (8 x 2 x in) Plexiglass Milling Stock Set (Optional) The Plexiglass Milling Stock Set includes 25 plexiglass milling stocks. Each stock has the following dimensions: x 76.2 x 12.7 mm (6 x 3 x 0.5 in). Quantity Plexiglass Milling Stocks x 76.2 x 12.7 mm (6 x 3 x 0.5 in) Aluminum Milling Stock Set (Optional) The Aluminum Milling Stock Set includes 50 aluminium milling stocks. Each stock has the following dimensions: 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in). Quantity Aluminum Milling Stocks x 50.8 x 12.7 mm (2 x 2 x 0.5 in) 10 Festo Didactic
11 End Mill Set (Optional) The End Mill Set includes the following: One mm (1/8 in) end mill with a shank diameter of mm (3/8 in), 2 flutes, square end One 6.35 mm (1/4 in) end mill with a shank diameter of mm (3/8 in), 2 flutes, square end One mm (1/8 in) end mill with a shank diameter of mm (3/8 in), 2 flutes, 1 ball end One end mill holder for end mills with a shank diameter of 9.53 mm (3/8 in) Square-End Mill (Smaller) Quantity 1 Shank Diameter mm (3/8 in) Mill Diameter (1/8 in) End 1, square-shaped Flutes 2 Square-End Mill (Larger) Quantity 1 Shank Diameter mm (3/8 in) Mill Diameter 6.35 mm (1/4 in) End 1, square-shaped Flutes 2 Ball-End Mill Quantity 1 Shank Diameter mm (3/8 in) Mill Diameter (1/8 in) End 1, ball-shaped Flutes 2 End Mill Holder Holds end mills with a shank diameter of 9.53 mm (3/8 in) Intermediate Milling Set (Optional) The Intermediate Milling Set includes the following: One mm (1/8 in) end mill with a shank diameter of mm (3/8 in), 2 flutes, square end One mm (3/16 in) end mill with a shank diameter of mm (3/8 in), 2 flutes, square end One 6.35 mm (1/4 in) end mill, with a shank diameter of mm (3/8 in), 2 flutes, 1 square end One mm (1/16 in) end mill, with a shank diameter of mm (3/16 in), 2 flutes, 2 square ends One mm (1/8 in) end mill, with a shank diameter of mm (3/8 in), 2 flutes, 1 ball end End mill holders for end mills with shank diameters of 4.76 mm (3/16 in) and mm (3/8 in) One hold-down set One three-jaw Jacobs chuck Square-End Mill (Smaller) Festo Didactic 11
12 Quantity 1 Shank Diameter mm (3/16 in) Mill Diameter mm (1/16 in) Flutes 2 Ends 2, square-shaped Square-End Mills (Larger) Quantity 3 Shank Diameter mm (3/8 in) Mill Diameter 3.175, 4.763, and 6.35 mm (1/8, 3/16, and 1/4 in) Flutes 2 End 1, square-shaped Ball-End Mill Quantity 1 Shank Diameter mm (3/8 in) Mill Diameter mm (1/8 in) Flutes 2 End 1 End Mill Holders Holds end mills with shank diameters of 4.76 mm (3/16 in) and mm (3/8 in) Hold-Down Set Refer to Model for specifications Drill Chuck Type Three-jaw Jacobs chuck Accessories No. 1 Morse arbor and a drawbolt to hold it in place Engraver Tool Set (Project Lead the Way) (Optional) The Engraver Tool Set (Project Lead the Way) includes the following: A collet for end mills with a shank diameter of mm (3/16 in) A No. 1 Morse taper One mm (1/16 in) end mill with a shank diameter of mm (3/16 in), 2 flutes, 2 square ends One mm (1/32 in) end mill with a shank diameter of mm (3/16 in), 2 flutes, 2 square ends Collet Taper End Mills Quantity 2 Shank Diameter Mill Diameter Ends Flutes 2 For end mills with a shank diameter of mm (3/16 in) No. 1 Morse mm (3/16 in) mm (1/16 in) and mm (1/32 in) 2, square-shaped Pneumatic Vise (Optional) The Pneumatic Vise consists of a cylinder-operated, heavy-duty vise used to achieve automatic clamping and unclamping of the stock loaded in the CNC Mill. The Pneumatic Vise is supplied with a pneumatic control box that connects to the solenoid driver port of the CNC Mill, permitting M- 12 Festo Didactic
13 code control of the extension and retraction of the vise cylinder with the CNC Mill Software, Model The Pneumatic Vise requires compressed air for operation. Vise Jaws Operation Width Depth Use Vise Cylinder Type Bore Stroke Pneumatic Control Box Maximal Air Supply Vise Control Input Pneumatic Output Ports Pneumatic 63 mm (2.48 in) 9 mm (0.35 in) For 50.8 mm (2 in) square parts Double-acting 22.2 mm (0.875 in) 25.4 mm (1 in) 275 kpa (40 psig) Connects to the solenoid driver port of the CNC Mill 2, the air flow through each port can be metered manually Plexiglass Milling Stock Set (Optional) The Plexiglass Milling Stock Set includes 100 plexiglass milling stocks. Each stock has the following dimensions: 50.8 mm (2 in) x 50.8 mm (2 in) x 12.7 mm (0.5 in). Quantity Plexiglass Milling Stocks x 50.8 x 12.7 mm (2 x 2 x 0.5 in) Festo Didactic 13
14 Personal Computer (Optional) The Personal Computer consists of a desktop computer running under Windows 10. A monitor, keyboard, and mouse are included. Power Requirements Current Service Installation 2 A Standard single-phase ac outlet Mill Tool Set (Optional) The Mill Tool Set contains three end mills of various types, a mill holder, and an edge finder. End Mills with Two Flutes Types: End Mill Holders Edge Finder Square nose, 2 ends, shank diameter of mm (3/16 in), mill diameter of mm (1/16 in) Square nose, 1 end, shank diameter of mm (3/8 in), mill diameter of 6.35 mm (1/4 in) Square nose, 1 end, shank diameter of mm (3/8 in), mill diameter of mm (1/8 in) For mm (3/16 in), 6.35 mm (1/4 in), and mm (3/8 in) shank diameter end mills Single mm (3/8 in) shank, 5.08 mm diameter (0.2 in) head Hold-Down Set (Optional) The Hold-Down Set contains two strap clamps with bolts, T-nuts, washers, and various lengths of socket head cap screws. Accessories Includes: Two strap clamps with bolts T-nuts Washers Various lengths of socket head cap screws 14 Festo Didactic
15 Mill Vise (Optional) The Mill Vise is ideal for operation with the CNC Mill. Its jaws are 50.8 mm (2 in) wide by 25.4 mm (1 in) deep and open a full 50.8 mm (2 in). The fixed jaw has both a horizontal and vertical "V" groove to better hold round bar stock. The vise includes two clamps for attachment to the CNC Mill. Jaw Width Opening Between Jaws Accessories 50.8 mm (2 in) 50.8 mm (2 in) Two clamps with screws and T-nuts to attach to the mill table Festo Didactic 15
16 Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc All rights reserved. Festo Didactic SE Rechbergstrasse Denkendorf Germany P. +49(0)711/ F. +49(0)711/ Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ United States P F Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P F Festo Didactic
CNC Mill Training System (Heavy Duty)
CNC Mill Training System (Heavy Duty) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Features & Benefits 3 List of Equipment 3 List of Manuals
More informationCNC Lathe System Training System (Light Duty)
5300-25 CNC Lathe System Training System (Light Duty) LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 11/2017 Table of Contents General Description 2 Features & Benefits 3 List of Equipment 3
More information5500 CNC Lathe Systems (Heavy Duty)
5500 CNC Lathe Systems (Heavy Duty) LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 04/2018 Table of Contents General Description 2 Features & Benefits 3 List of Available Training Systems 3 Additional
More informationA Automation and Robotics CNC LATHE SYSTEM (LIGHT DUTY) MODEL 5300
A Automation and Robotics CNC LATHE SYSTEM (LIGHT DUTY) MODEL 5300 GENERAL DESCRIPTION The CNC Lathe System (Light Duty), Model 5300, provides training in computer-aided design (CAD) and computer-aided
More informationServo Robot Training Systems
Servo Robot Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 Robot Controller Module 3 Servo Robot Software 3 Location Pins 4 Included
More information5250 Servo Robot Training Systems
5250 Servo Robot Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 02/2018 Table of Contents General Description 2 Robot Controller Module 3 Servo Robot Software 3 Location Pins
More informationDistribution Transformer Trainer
8361-00 Distribution Transformer Trainer LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2018 Table of Contents General Description 2 Topic Coverage 2 Features & Benefits 2 List of Manuals
More informationPower Line Series Compensation Demonstrator (EMS Version)
Power Line Series Compensation Demonstrator (EMS Version) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 2 Table of Contents of the (s) 2 Additional
More informationPlantPAx Distributed Control System (DCS) Demonstrator - Pressure, Flow, Level, Temperature (3531-V0)
PlantPAx Distributed Control System (DCS) Demonstrator - Pressure, Flow, Level, Temperature 589631 (3531-V0) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2019 Table of Contents General Description
More information9063-RC Data Acquisition and Control Interface
9063-RC Data Acquisition and Control Interface LabVolt Series Datasheet Festo Didactic en 230 V - 50 Hz 11/2017 Table of Contents General Description 2 LVDAC-EMS 2 Metering 3 Oscilloscope 3 Phasor Analyzer
More informationExercise 1. Milling a Part with the Lab-Volt CNC Mill EXERCISE OBJECTIVE
Exercise 1 Milling a Part with the Lab-Volt CNC Mill EXERCISE OBJECTIVE When you have completed this exercise, you will be able to engrave text on square pieces of stock, using the Lab-Volt CNC Mill, model
More informationElectricity Fundamentals Training System
Electricity Fundamentals Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Courseware 2 Topic Coverage 2 List of Available Training
More informationAC Power Transmission Training System Add- On to ( )
AC Power Transmission Training System Add- On to 8006 587433 (89252-00) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 03/2019 Table of Contents General Description 2 List of Equipment 2 List
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationDigital Communications Simulation Software (LVSIM -DCOM)
Digital Communications Simulation Software (LVSIM -DCOM) LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 06/2018 Table of Contents General Description 2 Features 3 Digital Communications Equipment
More informationCare and Maintenance of Milling Cutters
The Milling Machine Care and Maintenance of Milling Cutters The life of a milling cutter can be greatly prolonged by intelligent use and proper storage. Take care to operate the machine at the proper speed
More information1640DCL Digital Control Lathe
1640DCL Digital Control Lathe MACHINE SPECIFICATIONS Multiple Function CNC Lathe 1. Manual Hand wheel Operation 2. CNC G-Code Operation 16.1 swing over bed, 8.6 swing over cross-slide 2.05 diameter hole
More informationElectricity and Electronics Training System - Module 1 and 2
Electricity and Electronics Training System - Module 1 and 2 LabVolt Series Datasheet Festo Didactic en 03/2018 Table of Contents General Description 2 List of Manuals 2 Table of Contents of the Manual(s)
More informationOrbit Simulator Software (9581-H0)
Orbit Simulator Software 581901 (9581-H0) LabVolt Series Datasheet Festo Didactic en 04/2019 Table of Contents General Description 2 Telemetry and Instrumentation 2 Data Transfer 3 Orbit Simulator 5 Topic
More informationAntenna Training and Measuring System
Antenna Training and Measuring System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 05/2018 Table of Contents General Description 2 Antennas 5 Features & Benefits 7 List of Equipment 8 List
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationMultipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine For workshop application, single parts production and training purposes Servo motors and preloaded ball screws on all axes Infinitely
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationLathe. A Lathe. Photo by Curt Newton
Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationServomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Servo motors and preloaded ball screws on all axes infinitely
More informationDuality Lathe. CNC & Manually Operated Lathe. Product Datasheet.
CNC & Manually Operated Lathe www.tormach.com OVERVIEW The is a revolutionary concept in machine tools. Used in combination with a PCNC 1100 mill, this integrated machine accessory can be operated in three
More informationRoturn Roturn NEW with Siemens 808 D. Heavy-duty, fast, versatile! CNC Inclined Bed Lathe.
CNC Inclined Bed Lathe Heavy-duty, fast, versatile! Fanuc 0i-Mate TD with Manual Guide 0i control Turning diameter over bed up to 18.9 inch Z axis travel up to 17 inch 6-station tool turret Speed range
More informationPicoMill CNC. PicoMill CNC. High-tech for Production and Training Purposes. CNC Mini Drill Press/Milling Machine.
CNC Mini Drill Press/Milling Machine High-tech for Production and Training Purposes Table travel X, Y 10 x 4.13 Spindle mount MT3 With advanced GPlus 450 CNC or Siemens 808 D control GPlus 450 Siemens
More informationPicoTurn CNC. PicoTurn CNC. High-tech and suitable for training purposes. Mini CNC Lathe.
Mini CNC Lathe High-tech and suitable for training purposes with advanced GPlus 450 CNC or Siemens 808 D control with autom. 4-station tool changer center width 550 mm Small CNC Machine for training as
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationGANESH GBM-2616 CNC Bed Mill With Class-7 Super-Precision Spindle Bearings and Box Ways
20869 Plummer St. Chatsworth, CA 91311 Toll Free: 888-542-6374 (US only) Phone: 818-349-9166 I Fax: 818-349-7286 www.ganeshmachinery.com GANESH GBM-2616 CNC Bed Mill With Class-7 Super-Precision Spindle
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationATLANTIC JIG BORER MODEL 4000
ATLANTIC JIG BORER MODEL 4000 THE MACHINE BUILT TO DO TOMORROW'S WORK TODAY! ATLANTIC JIG BORER MODEL 4000 No single feature makes one jig-borer better than another... it takes the proper balance of engineering,
More informationGANESH GBM-4020 Heavy-Duty CNC Bed Mill With Class-7 Super-Precision Spindle Bearings and Box Ways
20869 Plummer St. Chatsworth, CA 91311 Toll Free: 888-542-6374 (US only) Phone: 818-349-9166 I Fax: 818-349-7286 www.ganeshmachinery.com GANESH GBM-4020 Heavy-Duty CNC Bed Mill With Class-7 Super-Precision
More informationP225 STANDARD FEATURES OPTIONAL FEATURES
CIRCULAR COLD SAWS P225 Manually operated Robust sawing head miters 45 left Bench top model no base Single blade speed of 1 HP Manual vise Material work stop rod for multiple cuts of the same length Flood
More informationHAFCO METALMASTER HM-51. Turret Milling Machine. (X) 600mm (Y) 220mm (Z) 310mm. Product Brochure
Product Brochure M576 HAFCO METALMASTER HM-51 Turret Milling Machine (X) 600mm (Y) 220mm (Z) 310mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-06-26 M576.pdf Left
More informationPrecision and high repeat accuracy for individual parts and small series manufacture. Made in Germany.
PROXXON - PD 400/CNC 1 Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. Z-axis and X-axis with recirculating ball spindles and two powerful step motors.
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More information.com More than a machine. Power your life
Heavy Duty Swivel Head Bed-Type Universal Milling Machine Ideal for Machining Large Work-pieces This kind of MM-KB2100 is the Heavy Duty Swivel Head Bed-Type Universal Milling Machine featuring large cross
More informationMill Specifications. FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle
Mill Specifications FEATURE 5000(5100) 5400(5410) 2000 (2010) Max clearance, table to spindle 8.00" (203 mm) 8.00" (203 mm) 9.00" (229 mm) Throat (without headstock spacer block) Throat (with headstock
More informationMF 1 MF 1 V MF 1 MF 1 V. Multipurpose Milling Machines. Most widely used milling machine type word-wide!
Multipurpose Milling Machines Most widely used milling machine type word-wide! with 3 axes position indicator head swivels through 3 axes swivel r + l ± 90 ilt forward + reverse ± 45 rotation on the column
More informationGANESH GBM-6024 CNC Bed Mill With Class-7 Super-Precision Fafnir Spindle Bearings and Box Ways
20869 Plummer St. Chatsworth, CA 91311 Toll Free: 888-542-6374 (US only) Phone: 818-349-9166 I Fax: 818-349-7286 www.ganeshmachinery.com GANESH GBM-6024 CNC Bed Mill With Class-7 Super-Precision Fafnir
More informationCollet Closer & Tailstock Options
Collet Closer & Tailstock Options Fail-Safe Collet Closers Spring-close, air-to-open for fail-safe operation (85psi max) Part remains clamped even if loss of air should occur Non-adjustable grip force
More information15L Slant-PRO TM CNC LATHE
15L Slant-PRO TM CNC LATHE INDEX Product Overview p. 2 Specifications p. 3 Options p. 4 Workholding pp. 5-8 Toolholding pp. 9-12 Warranty p. 16 ENABLING YOUR IDEAS Tormach 15L Slant-PRO CNC Lathe PRODUCT
More informationEquipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02. 3D Printer Specifications
Equipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02 Tech Specifications 3D Printer Specifications Print size (X Y Z) (Not less than) 600 x 300 x 300 mm Print Speed- Range 55-75 mm/sec Layer Resolution
More informationHM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationTechCut 5 PRECISION HIGH SPEED SAW. Product Brochure. Quality Products for Metallographic Sample Preparation & Analysis
Product Brochure TechCut 5 PRECISION HIGH SPEED SAW A VERSATILE, PROGRAMMABLE SECTIONING MACHINE DESIGNED TO CUT A WIDE VARIETY AND SIZE OF MATERIALS Quality Products for Metallographic Sample Preparation
More informationHM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationNumturn Numturn Powerful CNC Technology, for high flexibility and easy handling. CNC Cycle Lathes.
CNC Cycle Lathes Powerful CNC Technology, for high flexibility and easy handling Siemens 808 D Manual Machine Plus or Fagor 8055i Turning diameter over bed 26 Center width up to 79 Main spindle up to 20
More informationTurret Milling Machine Geared Head Horizontal - Vertical
Product Brochure M163D HAFCO METALMASTER HM-52G Turret Milling Machine Geared Head Horizontal - Vertical (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without
More informationWeeke Machining Center, Model BP-100 Optimat
This PDF file has not been verified for accuracy. BEFORE BIDDING, all bidders should use the inspection period to verify specifications. Weeke Machining Center, Model BP-100 Optimat Weeke's BP-100 is a
More informationMACHINE TOOL ALIGNMENT TESTS
MACHINE TOOL ALIGNMENT TESTS 39 MACHINE TOOL TESTING INTRODUCTION: The surface components produced by machining processes are mostly by generation. As a result, the quality of surface produced depends
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationHAFCO METALMASTER HM-50. Turret Milling Machine. (X) 600mm (Y) 200mm (Z) 340mm. Product Brochure
Product Brochure M160D HAFCO METALMASTER HM-50 Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-11-02 M160D.pdf
More informationIntroduction to Machining: Lathe Operation
Introduction to Machining: Lathe Operation Lathe Operation Lathe The purpose of a lathe is to rotate a part against a tool whose position it controls. It is useful for fabricating parts and/or features
More informationX.mill 1100 L. X.mill 1100 L. CNC Vertical Machining Center. Universal Machining Center with customized options.
CNC Vertical Machining Center Universal Machining Center with customized options GPlus 450 or Siemens 828D CNC control with touch screen technology, plus USB port Travel X-axis 1100 mm Y-axis 600 mm Z-axis
More informationScrews. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes:
Screws Introduction Screws are used for two purposes: 1. To clamp things together. 2. To control motion. 1. Nuts, bolts and screws used to clamp things together. Nuts, bolts and screws that are used for
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationCNC TURNING CENTRES B750 B1250
CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.
More informationX.mill X.mill Vertical CNC Machining Centers
Vertical CNC Machining Centers Even in this machine class, X.mill stands for proven quality, high productivity and low maintenance, which makes it an ideal solution for effective, low-cost series production
More informationHM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationCNC TURNING CENTRES B1200-M-Y
CNC TURNING CENTRES B1200-M-Y Great versatility and superb chip removal. B1200 2-3 The family of BIGLIA B1200 lathes universally appreciated for their rigidity, accuracy and durability, has been designed
More informationSECTION 9: PARTS Column Breakdown
SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60
More informationFNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way
RICH WELL 206.0 Dimensions R450 E FNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way 20 C D Chip conveyor 092 H G B 46 575 A F Unit:mm A B C D E F G H FNL220LSY/FNL220LY 952 2946 2700
More informationInTurn TAIL STOCK II
Specifications for the InTurn TAIL STOCK II accessory for the InTurn Indexing Turning 4 th axis The InTurn series is the only CNC mill accessory that provides both Indexing and coordinated 4 axis motion
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationUnequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry " at spindle nose.
CATALOG 1258-4 Unequalled accuracy The Clausing is a precision machine tool built to tolerances that are tightest in the industry. Spindle taper (internal).0002" run-out is within.0002" at spindle nose.
More informationChapter 22 MACHINING OPERATIONS AND MACHINE TOOLS
Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Turning and Related Operations Drilling and Related Operations Milling Machining Centers and Turning Centers Other Machining Operations High Speed Machining
More informationACP 160. Cylinder boring machine. BERCO S.p.A. A Company of ThyssenKrupp Technologies
ACP 160 Cylinder boring machine A Company of ThyssenKrupp Technologies BERCO S.p.A. ACP 160 Cylinder boring machine Berco's high productivity ACP160 series presents the ultimate in engine block boring
More informationWeeke CNC Machining Center, Model BP-140 ATC Optimat
Weeke CNC Machining Center, Model BP-140 ATC Optimat Weeke's BP-140 is a truly industrial machine designed primarily for pointto-point boring and machining of flat components without special workpiece
More informationAxial Movement. Tailstock 2,000 RPM MAXIMUM SPINDLE SPEED AUTOMATIC LUBRICATION SYSTEM 15 HYDRAULIC CHUCKING SYSTEM EXTRA WIDE Z AXIS DESIGN OF 620MM
STANDARD FEATURES FANUC TXP-100FA CONTROL Spindle Features Body Structure POWERFUL 49 HP SPINDLE MOTOR RIGID 45 DEGREE SLANT BED 2,000 RPM MAXIMUM SPINDLE SPEED AUTOMATIC LUBRICATION SYSTEM 15 HYDRAULIC
More informationVHF 3 VHF 3. Universal Milling Machine. Rigid Universal Milling Machine for drilling and milling, with large travels.
Universal Milling Machine Rigid Universal Milling Machine for drilling and milling, with large travels incl. 3-axis position indicator travel distances X axis 750 mm Y axis 280 mm Z axis 430 mm speed range
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationPrecision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationCHAPTER 6 EXPERIMENTAL VALIDATION AND RESULTS AND DISCUSSIONS
119 CHAPTER 6 EXPERIMENTAL VALIDATION AND RESULTS AND DISCUSSIONS 6.1 CNC INTRODUCTION The CNC systems were first commercially introduced around 1970, and they applied the soft-wired controller approach
More informationBD-405 MINI LATHE BD-712 METAL LATHE. Distance between centers Hole through spindle. Cross slide travel
BD-405 MINI LATHE Cast iron with ground, hardened slideways Belt driven, with variable speed self-centring 3 jaw scroll chuck Chuck guard with a safety interlock Supplied with 3 jaw chuck, wrench set and
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationCNC LATHE...P1~P6 CNC MILL... P7~P12 CNC ENGRAVING MACHINE...P13 MACHINING CENTER...P14~P16
With twenty years experiences in manufacturing & exporting machine and tools, we have enjoyed considerable good reputation from our customers over the world because of the high quality and first-class
More informationEMCOMAT E-200 MC for the m cycle-controlled m
EMCOMAT E-200 MC for the m cycle-controlled m 1 HEADSTOCK Solid cast-iron construction Powerful Siemens drive system Short taper spindle nose with CAMLOCK adaptor Spindle bore diameter ø 53 (50) mm 2 2
More informationDUGARD. DUGARD Machine. Dugard Multi-Function Lathes BNC 1800 / BNC 2200 / BNC Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 Dugard Multi-Function Lathes BNC 1800 / BNC 2200 / BNC 2600 DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 DUGARD BNC Multi-Function
More informationPortable Milling Machines
Versatile and Accurate Mill X Y Z W Diameter Shank 18 1.0 Z X 57. 5. 30 1.0 Z X 36 76 5. 30 6 6 6.0 6Z X 36 76 36 8 8 8.0 8Z X 91. 6 8 8 8.0 8Z X 7 165.6 80 16 16 16.0 16Z X 96 03 06. 06. 06. The new TCM
More informationFPK 4 FPK 6 FPK 4 FPK 6. Tool Milling Machines. Universal Machine Tools including 3-axis position indicator.
Tool Milling Machines Universal Machine Tools including 3-axis position indicator FPK 4 Travel X-axis 15.7 / 12.2 in (man. / autom.) Table dimensions 12.6 x 29.5 in FPK 6 Travel X-axis 23.6 / 22 in (man.
More informationMulti-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application
Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement
More informationFLAT BED CNC LATHE. The Most Economical, User Friendly, Yet Highly Capable CNC Lathe Available!
FLAT BED CNC LATHE The Most Economical, User Friendly, Yet Highly Capable CNC Lathe Available! Safe, Easy Operation And High Performance Are The Result Of Ingenuity And Quality Workmanship The extended
More informationX.mill 900 L. X.mill 900 L. CNC Vertical Machining Center. Universal Machining Center with customized options.
CNC Vertical Machining Center Universal Machining Center with customized options GPlus 450 or Siemens 828D CNC control with touch screen technology, plus USB port Travel X axis 850 mm Y axis 550 mm Z axis
More informationAdvantages, Function and Characteristics of the DMwriter MX.
DMwriter MX All-in One Overview Advantages, Function and Characteristics of the DMwriter MX. The DMwriter MX Marking Head was designed as an easy to use, economical, spindle actuated permanent marking
More informationHeavy Equipment Solutions
Heavy Equipment Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and
More informationV700 HIGH SPEED MACHINING CENTER LONG CHANG MACHINERY CO., LTD. Roller Guide System
Roller Guide System V700 HIGH SPEED MACHINING CENTER LONG CHANG MACHINERY CO., LTD. 01 FIRST V700 SPEED & ACCURACY HIGH SPEED MACHINING CENTER 3-axes high rigidity & precision roller guide ways. Direct
More informationTACCHELLA PULSAR H 375
TACCHELLA PULSAR H 375 CNC external cylindrical grinding machine in excellent conditions Manufacturer TACCHELLA Model PULSAR H 375 Year of manufacture 2013 Control SIEMENS SINUMERIK 840 D Solution Line
More informationHM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm
HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm On Sale Ex GST Inc GST $1,850.00 $1,690.00 $2,035.00 $1,859.00 ORDER CODE: M121 MODEL: Digital Readout: HM-32 Optional Type: Vertical Table
More informationDUGARD. DUGARD Machine. Dugard 300 Slant Bed High Precision CNC Lathe. Machine Tools That Create Solutions Since Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard 300 Slant Bed High Precision CNC Lathe DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Outstanding features that guarantee
More informationModule 1. Classification of Metal Removal Processes and Machine tools. Version 2 ME IIT, Kharagpur
Module 1 Classification of Metal Removal Processes and Machine tools Lesson 2 Basic working principle, configuration, specification and classification of machine tools Instructional Objectives At the end
More informationTurning Hardinge Super-Precision Quest GT 27 Turning Center
Turning Hardinge Super-Precision Quest GT 27 Turning Center Quotation to: ABMNameAlpha Quotation Number: SOHDocumentOrderInvoice Contact: Contact Name Address: ShipToAddressLine1 ShipToAddressLine2 ShipToAddressLine3
More information