5250 Servo Robot Training Systems

Size: px
Start display at page:

Download "5250 Servo Robot Training Systems"

Transcription

1 5250 Servo Robot Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 02/2018

2 Table of Contents General Description 2 Robot Controller Module 3 Servo Robot Software 3 Location Pins 4 Included Equipment 4 Topic Coverage 4 Features & Benefits 4 List of Available Training Systems 5 Additional Equipment Required to Perform the Exercises 5 Optional Equipment 5 Optional Manual(s) 6 Available Training Systems 6 Equipment Description 10 Optional Equipment Description 13 General Description The Servo Robot Training Systems are complete and affordable training systems that cover the programming and operation of industrial robots. Through the curriculum and hands-on exercises with the Servo Robot Training Systems, students learn to create automated work cells ideal for Flexible Manufacturing Systems (FMS) and Computer Integrated Manufacturing (CIM). The precision-built, articulated arm of the Servo Robot included with the system represents an important step in automation and handling. It is driven by servo motors equipped with optical encoders that provide feedback to the controller. It can be controlled and programmed using a hand-held terminal or from a host computer running the RoboCIM 5250 Software or the Robotics software. The software gives students the opportunity to prepare their sequences within the 3D environment, simulate them, and then switch to control mode to perform the sequence in the real world. The Servo Robot has five axes of rotation plus a gripper. All joints can be used simultaneously to perform a sequence of moves. The Servo Robot can be operated in the Articular mode, which allows each articulation to be controlled and moved independently, or it can be operated in the Cartesian mode, in which the gripper moves linearly, parallel to a specified axis. Due to their modular design, the Servo Robot Training Systems allow connection with other equipment, such as the CNC Mill, to further expand the training capabilities. 2 Festo Didactic

3 Robot Controller Module The Robot Controller module is provided with TTL (Transistor- Transistor Logic) inputs for the monitoring of input devices; TTL outputs to communicate with other robot units or control external accessories such as a belt conveyor; relay outputs for the control of Robot Controller Module external accessories such as Signal Tower, 5924; output ports for the control of external devices such as the Linear Slide or Rotary Carousel; and serial communication port for host control operation and for uploading and downloading programs. The Robot Controller module is also equipped with CNC (Computerized Numerical Control) ports, which enable communication with other Automation CNC machines. This allows for a truly integrated flexible manufacturing system where the robot and CNC machines can operate in wait mode until contacted by other equipment. The Robot Controller also houses a USB port for program storage. The Hand-Held Terminal connects to the Robot Controller via a serial communication port. It is used for programming points, saving programs, and general operation of the Servo Robot System. Servo Robot Software The RoboCIM 5250 Software or Robotics software can be used in place of the Hand-Held Terminal. The Robotics software allows the user to point and click to move the Servo Robot and select points. The editing and labeling processes are very userfriendly. Furthermore, the capability of Robotics to create task programs allows the design of complex processes. With the RoboCIM 5250 Software, the motion of the Servo Robot can be controlled or simulated. The software provides a threedimensional virtual environment and an easy-to-use interface allowing students to easily learn the RoboCIM 5250 Software and Robotics Software fundamentals of robotics. Two programming modes are available: an intuitive icon programming mode and a text programming mode to create more complex tasks. Festo Didactic 3

4 Location Pins The Servo Robot and external devices offered as options with the Servo Robot System are equipped with location pins (or push-lock fasteners). These pins are designed to be used with the metallic, perforated work surfaces. This easy-to-use mechanism ensures the position of the equipment when repeating programs. Location pin on a Gravity Feeder Included Equipment The equipment supplied with the Servo Robot System, , includes a Servo Robot, Robot Controller, Hand-Held Terminal, Emergency Stop Button module, RoboCIM 5250 Software, Robotics software Grids, Robot calibration Robot Calibration Tools tools, student and instructor manuals, user guides, and all leads and cables required to operate the system. The Servo Robot System, , is supplied with all the equipment of the and two solid-metal perforated work surfaces that can be linked together using the provided Spacers. They can be put atop a regular work table or installed on one of the optional benches. Many optional devices can be added to the system to perform more complex processes. The optional devices include a Rotary Carousel, Belt Conveyor, Gravity Feeders, Pneumatic Feeders, a Signal Tower, and a Linear Slide. Topic Coverage Introduction Familiarization with the Servo Robot System Point-to-Point and Task Programs Program Editing Control Overview Industrial Application Simulation Using a Gravity Feeder, Belt Conveyor, Pneumatic Feeder, Rotary Carousel or Linear Slide. Estimated program duration: 25 hours Features & Benefits Allows students to simulate and control the operation of a servo robot 4 Festo Didactic

5 Curriculum is supported by an articulated robot; all joints can be used simultaneously to perform a sequence of moves Controls the robot's movements using articular and/or Cartesian coordinates Provided with student manuals, instructor guides, user guides, as well as all the leads and cables required to operate the system Includes a large base, which allows the robot to be placed on a regular work table and stay in place Durable, steel and aluminum construction requiring minimal maintenance Can be controlled either using a Teach-Pendant or the software, RoboCIM 5250 Several optional components to create tailored work cells Control/simulation software program simulates and controls with three-dimensional representations of the mechanical and electrical characteristics of the equipment Robotics System Software Development Kit also available to develop custom applications for the Robot System Estimated program duration: approximately 25 hours List of Available Training Systems 1 Servo Robot Training System Servo Robot Training System (with Work Surface) Additional Equipment Required to Perform the Exercises 1 1 Training on Introduction to Robotics, 0.9 day TF Optional Equipment 1 Gravity Feeder for Square Parts Gravity Feeder for Cylindrical Parts Pneumatic Feeder Kit for Square Parts A0 1 Pneumatic Feeder Kit for Cylindrical Parts A0 1 Rotary Carousel Linear Slide, Long Linear Slide, Short 5209-A0 1 Belt Conveyor RoboCIM 5250 Software (Domestic Market) - 1 User Accessories for Servo Robot Accessories for A0 1 Robot 5250 Software Development Kit Signal Tower Kit 5924-A0 1 Storage/Work Surface Air Compressor 6410-C0 1 Location Plate Tray Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 2 Requires compressed air. 3 Requires compressed air. Festo Didactic 5

6 1 Box Storage Location Tray Spacer Work Bench for 1 Work Surface Work Bench for 2 Work Surfaces Work Bench for 3 Work Surfaces Work Surface - Large Square Part - Plexiglass Square Part - Wax Optional Manual(s) 1 Servo Robot Training Systems (Manuals on CD-ROM) A0 Available Training Systems Servo Robot Training System The Servo Robot Training System provides complete and affordable training in the programming and operation of industrial robots. Through the curriculum and hands-on exercises with the Servo Robot Training System, students learn to create automated work cells ideal for Flexible Manufacturing Systems (FMS) and Computer Integrated Manufacturing (CIM). The equipment supplied with the Servo Robot Training System includes a Servo Robot, Robot Controller, Hand-Held Terminal, Emergency Stop Button module, RoboCIM 5250 Software, Robotics software, Grids, Robot calibration tools, student manuals, instructor guides, user guides, as well as all the leads and cables required to operate the system. The precision-built, articulated arm of the Servo Robot represents an important step in automation and handling. It is driven by servo motors equipped with optical encoders to provide feedback to the controller. The Servo Robot has five axes of rotation plus a gripper. All joints can be used simultaneously to perform a sequence of moves. The Servo Robot can be operated in the Articular mode, which allows each articulation to be controlled and moved independently, or it can be operated in the Cartesian mode where the gripper moves linearly, parallel to a specified axis. The Servo Robot can be controlled and programmed using a hand-held terminal or from a PC host computer running the RoboCIM 5250 Software or the Robotics software. 4 Does not include the work surface(s). 5 Does not include the work surface(s). 6 Does not include the work surface(s). 6 Festo Didactic

7 Many optional devices can be added to the system to perform more complex processes. The optional devices include a Rotary Carousel, Belt Conveyor, Gravity Feeders, Pneumatic Feeders, a Signal Tower, and a Linear Slide. List of Equipment 1 Robot Controller Servo Robot 5250-A0 List of Manuals Manual Description Introduction to Robotics (Student Manual) Introduction to Robotics (Instructor Guide) Servo Robot System (User Guide) E0 RoboCIM 5250 Software (User Guide) E0 Table of Contents of the Manual(s) Introduction to Robotics (Student Manual) ( ) 1 Familiarization with the Servo Robot System 2 Point-to-Point Programs 3 Task Programs 4 Program Editing 5 Control Overview 6 Gravity Feeders 7 Conveyors 8 Pneumatic Feeders 9 Rotary Carousels 10 Linear Slides Additional Equipment Required to Perform the Exercises 1 7 Training on Introduction to Robotics, 0.9 day TF Optional Equipment 1 8 Installation and Commissioning of a System IC System Intended Location On a table or on linear slides 7 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 8 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". Festo Didactic 7

8 Dimensions On a Table (H x W x D) Dimensions On Linear Slides (H x W x D) 1090 x 1780 x 590 mm (42.9 x 70.1 x 23.2 in) 1190 x 1770 x 890 mm (46.9 x 69.7 x 35 in) TBE Servo Robot Training System (with Work Surface) The Servo Robot Training System provides complete and affordable training in the programming and operation of industrial robots. Through the curriculum and hands-on exercises with the Servo Robot System, students learn to create automated work cells ideal for Flexible Manufacturing Systems (FMS) and Computer Integrated Manufacturing (CIM). The training system contains all the equipment included with the Servo Robot Training System, , with the addition of two solid-metal perforated work surfaces that can be linked together using the provided spacers. Both models are provided with student manuals and instructor guides, user guides, as well as all the leads and cables required to operate the system. The precision-built, articulated arm of the Servo Robot represents an important step in automation and handling. It is driven by servo motors equipped with optical encoders to provide feedback to the controller. The Servo Robot has five axes of rotation plus a gripper. All joints can be used simultaneously to perform a sequence of moves. The Servo Robot can be operated in the Articular mode, which allows each articulation to be controlled and moved independently, or it can be operated in the Cartesian mode where the gripper moves linearly, parallel to a specified axis. The Servo Robot can be controlled and programmed using a hand-held terminal or from a PC host computer running the RoboCIM 5250 Software or the Robotics software. Many optional devices can be added to the system to perform more complex processes. The optional devices include a Rotary Carousel, Belt Conveyor, Gravity Feeders, Pneumatic Feeders, a Signal Tower, and a Linear Slide. List of Equipment 2 Spacer Robot Controller Servo Robot 5250-A0 2 Storage/Work Surface Festo Didactic

9 List of Manuals Manual Description Introduction to Robotics (Student Manual) Introduction to Robotics (Instructor Guide) Servo Robot System (User Guide) E0 RoboCIM 5250 Software (User Guide) E0 Table of Contents of the Manual(s) Introduction to Robotics (Student Manual) ( ) 1 Familiarization with the Servo Robot System 2 Point-to-Point Programs 3 Task Programs 4 Program Editing 5 Control Overview 6 Gravity Feeders 7 Conveyors 8 Pneumatic Feeders 9 Rotary Carousels 10 Linear Slides Additional Equipment Required to Perform the Exercises 1 9 Training on Introduction to Robotics, 0.9 day TF Optional Equipment 1 10 Installation and Commissioning of a System IC System Intended Location Dimensions On a Table (H x W x D) Dimensions On Linear Slides (H x W x D) On a table or on linear slides 1090 x 1780 x 590 mm (42.9 x 70.1 x 23.2 in) 1190 x 1770 x 890 mm (46.9 x 69.7 x 35 in) TBE 9 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 10 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". Festo Didactic 9

10 Equipment Description Robot Controller The Robot Controller contains the inputs and outputs required for sending and receiving TTL signals to/ from the peripheral equipment and CNC machine tools. The Robot Controller is operated from the Hand- Held Terminal, the RoboCIM 5250 Software, or the Robotics software. The Robot Controller includes the RoboCIM 5250 Software, Robotics software, Hand-Held Terminal, Emergency Stop Button module, Robot calibration tools, as well as all the leads and cables required to operate the system. Power Requirements Current Service Installation CPU Memory CNC I/O Ports Number TTL Inputs Number TTL Outputs Number Relay Number Contacts Hand-Held Terminal Modem Port Servo Axes Number Computer Requirements 1.7 A Standard single-phase ac outlet Stand-alone, PID, real-time, and PWM motor control 800 MHz 512 Mb 2 (for interfacing with CNC machines) 8 with LED status indicators 8 with LED status indicators 4 with LED status indicators NO and NC contacts, 30 V DC 500 ma Serial RS (6 standard configuration with no accessories) A currently available personal computer running under one of the following operating systems: Windows 7 or Windows x 267 x 457 mm (5 x 10.5 x 18 in) 7.4 kg (16.4 lb) 10 Festo Didactic

11 Servo Robot 5250-A0 The Servo Robot has five axes of rotation plus a gripper. It is driven by servo motors equipped with optical encoders. All joints can be used simultaneously to perform a programmed move sequence. A Cartesian mode allows to move the gripper linearly, parallel to a specified axis. Movement of the mechanisms is accomplished by belts through a series of gears and pulleys. The Servo Robot has a load capacity of 1.4 kg (3 lb). Two grid sheets are provided for the positioning of the Servo Robot when perforated work surfaces are not available. Additional Equipment Required to Perform the Exercises 1 11 Training on Introduction to Robotics, 0.9 day TF Articulated arm Number of Axes of Rotational Freedom 5 (plus gripper) Load Capacity at Arm Extension 1.4 kg (3 lb) Repeatability 2.5 mm (0.1 in) Maximum Speed 584 mm/s (23 in/s) Motor DC servo motor with closed loop control Number 6 Encoder Optical Working Envelope Shoulder 315 Upper Arm 155 Forearm 240 Wrist Pitch 155 Wrist Rotation 360 Hard Home Fixed reference positions on all axes Computer Requirements A currently available personal computer running under one of the following operating systems: Windows 7 or Windows x 292 x 425 mm (33 x 11.5 x in) 21.6 kg (47.6 lb) 11 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. Festo Didactic 11

12 Storage/Work Surface The Storage/Work Surface is a perforated metal plate on which the equipment is placed. Two work surfaces can be joined using Spacers, x 590 x 590 mm (1 x 23 x 23 in) 5 kg (11 lb) Spacer The Spacer is a small metal piece with four push-lock fasteners that can be used to join two perforated work surfaces. 20 x 120 x 70 mm (0.8 x 4.7 x 2.8 in) 169 g (6 oz) 12 Festo Didactic

13 Optional Equipment Description Gravity Feeder for Square Parts (Optional) The Gravity Feeder for Square Parts is designed to feed square parts. It has a sensor switch and feedback cables for connection to the Robot Controller. Storage Capacity Part Characteristics Dimensions Thickness Switch Actuator Contacts 6 square parts 51 x 51 mm (2 x 2 in) mm ( in) Momentary Wireform SPDT, 12 V 0.06 A DC 279 x 203 x 241 mm (11 x 8 x 9.5 in) 2.1 kg (4.7 lb) Gravity Feeder for Cylindrical Parts (Optional) The Gravity Feeder for Cylindrical Parts is designed to feed small cylindrical parts. It has a sensor switch and feedback cables for connection to the Robot Controller. Festo Didactic 13

14 Storage Capacity Parts Characteristics Dimensions (Length x Diameter) Switch Actuator Contacts 8 cylindrical parts 51 x 35 mm (2 x in) Momentary Wireform SPDT, 12 V 0.06 A DC 279 x 203 x 241 mm (11 x 8 x 9.5 in) 2.1 kg (4.7 lb) Pneumatic Feeder Kit for Square Parts (Optional) 5122-A0 feeder section. The Pneumatic Feeder Kit for Square Parts is designed to feed square parts and includes a pneumatic feeder and controller. It consists of storage and feeder sections and a pneumatic cylinder. Both sections have microswitches to send feedback to the Pneumatic Feeder Controller. When the Pneumatic Feeder Controller detects that the feeder section is empty, it supplies compressed air to the pneumatic cylinder to push a part from the storage section into the Storage Capacity Part Characteristics Switch Actuator Contacts Pneumatic Cylinder Stroke Bore Size 10 square parts 51 x 51 x 13 mm (2 x 2 x 0.5 in) Momentary Standard-type, integral-hinged lever SPDT, 12 V 0.06 A DC Double-acting cylinder 76 mm (3 in) 19 mm (0.75 in) 190 x 292 x 60 mm (7.5 x 11.5 x in) 1.4 kg (3.1 lb) 14 Festo Didactic

15 Pneumatic Feeder Kit for Cylindrical Parts (Optional) 5142-A0 This Pneumatic Feeder Kit for Cylindrical Parts is designed to feed cylindrical parts and includes a Pneumatic Feeder (Cylindrical Parts) and controller. It consists of storage and feeder sections and a pneumatic cylinder. Both sections have microswitches to send feedback to the Pneumatic Feeder Controller. When the Pneumatic Feeder Controller detects that the feeder section is empty, it supplies compressed air to the pneumatic cylinder to push a part from the storage section into the feeder section. Storage Capacity Part Characteristics Dimensions (Length x Diameter) Switch Actuator Contacts Pneumatic Cylinder Stroke Bore Size 8 cylindrical parts 63.5 x 19 mm (2.5 x 0.75 in) Standard-type, integral-hinged lever Momentary SPDT, 12 V 0.06 A DC Double-acting cylinder 76 mm (3 in) 19 mm (0.75 in) 241 x 292 x 70 mm (9.5 x 11.5 x 2.75 in) 1.4 kg (3.1 lb) Rotary Carousel (Optional) The Rotary Carousel is used to demonstrate how parts can be transferred to and from a robot in a repetitive, rotational pattern. Its platter is driven by a dc servo motor. The carousel has a closed loop feedback system and a limit switch feedback for hard home capabilities. The operation of the Rotary Carousel is controlled by the Robot Controller, Festo Didactic 15

16 Platter Diameter 457 mm (18 in) Motor DC servo motor with closed loop control Number 1 Encoder Optical Switch Momentary Actuator Wireform Contacts SPDT, 12 V A - DC 292 x 514 x 457 mm (11.5 x x 18 in) 11 kg (24.2 lb) Linear Slide, Long (Optional) The Linear Slide is available in two models is designed to provide 1145 mm (45 in) of linear travel to the Servo Robot, while 5209-A provides 645 mm (25 in) of linear travel. The Linear Slide is driven by a dc servo motor directly coupled to a precision ball screw. It has a closed loop feedback system and a limit switch feedback for hard home capabilities. The operation of the Linear Slide is controlled by the Robot Controller, Motor Number 1 Encoder Maximum Travel DC servo motor with closed loop control Optical 1145 mm (45.1 in) 114 x 1702 x 298 mm (4.5 x 67 x in) 25.8 kg (56.8 lb) Linear Slide, Short (Optional) 5209-A0 The Linear Slide is available in two models is designed to provide 1145 mm (45 in) of linear travel to the Servo Robot, while 5209-A provides 645 mm (25 in) of linear travel. The Linear Slide is driven by a dc servo motor directly coupled to a precision ball screw. It has a closed loop feedback system and a limit switch feedback for hard home capabilities. The operation of the Linear Slide is controlled by the Robot Controller, Festo Didactic

17 Motor DC servo motor with closed loop control Number 1 Encoder Optical Maximum Travel 645 mm (25.4 in) 114 x 1202 x 298 mm (4.5 x 47.3 x in) 21.2 kg (46.7 lb) Belt Conveyor (Optional) The Belt Conveyor is used in materialhandling experiments. It has a selfcontained power supply and interface electronics. The control panel has inputs for interfacing with the Robot Controller. The inputs enable the conveyor to be remotely controlled. It can also be used as a stand-alone unit. The Belt Conveyor comes with a movable limit switch to detect the presence of parts on the belt. Motor Encoder Conveyor Belt Length Width Inputs Number Switch (Movable) Actuator Contacts DC servo motor with closed-loop control Optical 1880 mm (74 in) 127 mm (5 in) 3 (to control motor operation, engage/disengage motors, direction) TTL Input Momentary Wireform SPDT, 12 V 0.06 A DC 165 x 1892 x 279 mm (6.5 x 74.5 x 11 in) 14.4 kg (31.8 lb) Festo Didactic 17

18 RoboCIM 5250 Software (Domestic Market) - 1 User (Optional) The RoboCIM 5250 Software is used to simulate and control the operation of the Servo Robot System, 5250, and optional external devices such as Gravity Feeders, Belt Conveyors, or Linear Slides. One of the key features of the RoboCIM 5250 Software is that it simulates the actual equipment with three-dimensional representations. Sophisticated mathematical models accurately simulate the mechanical and electrical characteristics of the equipment. The RoboCIM 5250 Software allows users to interactively control and view the motion of the system. Programs can be created with the RoboCIM 5250 Software to control the equipment using either the text programming mode or the icon programming mode. Manual Manual Description RoboCIM 5250 Software (User Guide) E0 Additional Equipment Required to Perform the Exercises 1 12 Training on RoboCIM Software, 0.5 day TF Accessories for Servo Robot (Optional) The Accessories for Servo Robot consist of various pieces of equipment designed to help move and position parts of the Servo Robot, A. The accessories include two Location Plates, 38001, a Tray, 38002, a Box, 38003, and a Storage, Location Plate Number 2 Tray 12 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 18 Festo Didactic

19 Number 1 Box Number 1 Storage Number kg (7.9 lb) Accessories for 5902 (Optional) 5259-A0 The Accessories for 5902 consist of various pieces of equipment designed to help moving and positioning parts with the Servo Robot System. The Accessories include a Location Plate, 38001, a Box, 38003, a Location Tray, 38685, and two Spacers, Location Plate Number 1 Box Number 1 Location Tray Number 1 Spacer Number kg (2.1 lb) Festo Didactic 19

20 Robot 5250 Software Development Kit (Optional) The Robot 5250 Software Development Kit is used for developing applications for the Robot System. It includes a CD-ROM with all the files required to build programs to control the 5250 Servo Robot System using different programming languages. The SDK package includes program samples that show how to interface the Servo Robot System with Visual C++, LabVIEW, MATLAB and Simulink. The Software Development Kit comes with a User Guide giving the details for each function in the library. Since the Robot 5250 Software Development Kit is intended for developers, no instruction material is provided. Manual Manual Description 5250 Robotics System Software Development Kit (User Guide) E0 Computer Requirements A currently available personal computer running under one of the following operating systems: Windows 7 or Windows 8. Signal Tower Kit (Optional) 5924-A0 the Signal Tower. The Signal Tower Kit is one of the available external accessories for the Servo Robot Training Systems, Series The Signal Tower consists of three lights providing visual signals of the Robot Controller states. Lights are stacked one upon another, up to five modules. Each module is easily programmable without any special wiring or tools. A DC Power Supply, 6360, and Connection Leads, 5259-C, are required to operate 20 Festo Didactic

21 Signal Tower Lights Inputs (6) Electrical Leads Quantity and Color, Length Connectors Current Rating Power Requirement Current Service Installation Output Short-Circuit Protection 3 (green, red, and yellow) 24 V dc 368 x 170 x 170 mm (14.5 x 6.7 x 6.7 in) 1.3 kg (2.8 lb) One black, five red, 3 white; 60 cm (24 in) 2-mm banana plugs 10 A 1.25 A Standard single phase outlet 24 V 2.4 A DC Automatic current/limit foldback 105 x 135 x 220 mm (4.1 x 5.3 x 8.7 in) 3.6 kg (7.9 lb) Storage/Work Surface (Optional) The Storage/Work Surface is a perforated metal plate on which the equipment is placed. Two work surfaces can be joined using Spacers, x 590 x 590 mm (1 x 23 x 23 in) 5 kg (11 lb) Festo Didactic 21

22 Air Compressor (Optional) 6410-C0 The Air Compressor is a quiet device well suited for classroom and school laboratories. The Air Compressor can be used to provide compressed air to different components. A conditioning unit, 6411-A, must be connected to the compressor for certain applications. The Circulator Pump is available in different variants depending on ac power network voltages and frequencies. Because of this, the actual module may vary from the one shown in the picture. Power Requirements Current Service Installation Tank Capacity Flow Rate Maximum Pressure Noise Level 4.8 A Standard single-phase ac outlet 15.1 L (4 gal) 42.5 L/min at 620 kpa (1.5 SCFM at 90 psi) 800 kpa (120 psi) 40 db(a) (about as quiet as a refrigerator) TBE TBE Location Plate (Optional) The Location Plate is a steel plate with four holes designed to help position the Tray, 38002, or the Box, 38003, with precision. The Location Plate is equipped with push-lock fasteners allowing it to clamp to the work surface. 120 x 170 x 23 mm (4.7 x 6.7 x 0.9 in) 0.4 kg (0.9 lb) Tray (Optional) The Tray is an aluminum apparatus designed to help position and move the square parts manipulated with the Servo Robot. The Tray can hold up to four square parts and is equipped with a rectangular handle which can easily be grasped by the Servo Robot gripper. 22 Festo Didactic

23 378 x 77 x 97 mm (14.9 x 3 x 3.8 in) 158 g (5.6 oz) Box (Optional) The Box is an aluminum container that can be used to store and move parts manipulated with the Servo Robot, 5250-A. The Box is equipped with a rectangular handle which can easily be grasped by the Servo Robot gripper. 100 x 100 x 122 mm (3.9 x 3.9 x 4.8 in) 159 g (5.6 oz) Storage (Optional) The Storage is a steel apparatus with two perforated shelves designed to provide storage for the Tray, 38002, and the Box, The holes in the shelves help to precisely position the stored Tray or Box. 203 x 259 x 225 mm (8 x 10.2 x 8.9 in) 2.5 kg (5.5 lb) Location Tray (Optional) The Location Tray is a solid metal apparatus designed to help position square parts manipulated with the Servo Robot. When a part is dropped on the Location Tray it automatically aligns in the square-stamped center. The Location Tray is equipped with push-lock fasteners allowing it to clamp to the work surface x 120 x 120 mm (0.5 x 4.7 x 4.7 in) 49 g (1.7 oz) Festo Didactic 23

24 Spacer (Optional) The Spacer is a small metal piece with four push-lock fasteners that can be used to join two perforated work surfaces. 20 x 120 x 70 mm (0.8 x 4.7 x 2.8 in) 169 g (6 oz) Work Bench for 1 Work Surface (Optional) The Work Benches, s , , and , are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavyduty, swivelling, lockable casters. Optional equipment is available for each bench. Additional Equipment Required to Perform the Exercises 1 Work Surface - Large x 898 x 595 mm (36.7 x 35.4 x 23.4 in) TBE 24 Festo Didactic

25 Work Bench for 2 Work Surfaces (Optional) each bench. The Work Benches, s , , and , are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavyduty, swivelling, lockable casters. Optional equipment is available for Additional Equipment Required to Perform the Exercises 2 Work Surface - Large x 1796 x 595 mm (36.7 x 70.7 x 23.4 in) TBE Work Bench for 3 Work Surfaces (Optional) The Work Benches, s , , and , are solid metal benches that can accommodate one, two, and three work surfaces, respectively. The work surfaces are not included with the Work Benches. Each bench is mounted on four heavyduty, swivelling, lockable casters. Optional equipment is available for each bench. Additional Equipment Required to Perform the Exercises 3 Work Surface - Large x 1796 x 895 mm (36.7 x 70.7 x 35.3 in) TBE Festo Didactic 25

26 Work Surface - Large (Optional) The Work Surface - Large is a perforated metal surface on which the equipment can be installed. The Work Surface can be put atop a regular work table or on one of the optional benches. 41 x 883 x 584 mm (1.6 x x 23 in) 7.3 kg (16.2 lb) Square Part - Plexiglass (Optional) The Square Part - Plexiglass is a block of clear plexiglass used for various manipulations with the Servo Robot, x 51 x 51 mm (0.5 x 2 x 2 in) 39 g (1.4 oz) Square Part - Wax (Optional) The Square Part - Wax is a block of blue File-A-Wax used for various manipulations with the Servo Robot, x 51 x 51 mm (0.5 x 2 x 2 in) 31 g (1.1 oz) 26 Festo Didactic

27 Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc All rights reserved. Festo Didactic SE Rechbergstrasse Denkendorf Germany P. +49(0)711/ F. +49(0)711/ Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ United States P F Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P F Festo Didactic 27

Servo Robot Training Systems

Servo Robot Training Systems Servo Robot Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 Robot Controller Module 3 Servo Robot Software 3 Location Pins 4 Included

More information

CNC Mill Training System (Heavy Duty)

CNC Mill Training System (Heavy Duty) CNC Mill Training System (Heavy Duty) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Features & Benefits 3 List of Equipment 3 List of Manuals

More information

Distribution Transformer Trainer

Distribution Transformer Trainer 8361-00 Distribution Transformer Trainer LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2018 Table of Contents General Description 2 Topic Coverage 2 Features & Benefits 2 List of Manuals

More information

CNC Mill Training System (Light Duty)

CNC Mill Training System (Light Duty) CNC Mill Training System (Light Duty) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Features & Benefits 2 List of Equipment 3 List of Manuals

More information

CNC Lathe System Training System (Light Duty)

CNC Lathe System Training System (Light Duty) 5300-25 CNC Lathe System Training System (Light Duty) LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 11/2017 Table of Contents General Description 2 Features & Benefits 3 List of Equipment 3

More information

5500 CNC Lathe Systems (Heavy Duty)

5500 CNC Lathe Systems (Heavy Duty) 5500 CNC Lathe Systems (Heavy Duty) LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 04/2018 Table of Contents General Description 2 Features & Benefits 3 List of Available Training Systems 3 Additional

More information

Power Line Series Compensation Demonstrator (EMS Version)

Power Line Series Compensation Demonstrator (EMS Version) Power Line Series Compensation Demonstrator (EMS Version) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 2 Table of Contents of the (s) 2 Additional

More information

Digital Communications Simulation Software (LVSIM -DCOM)

Digital Communications Simulation Software (LVSIM -DCOM) Digital Communications Simulation Software (LVSIM -DCOM) LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 06/2018 Table of Contents General Description 2 Features 3 Digital Communications Equipment

More information

Electricity Fundamentals Training System

Electricity Fundamentals Training System Electricity Fundamentals Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Courseware 2 Topic Coverage 2 List of Available Training

More information

AC Power Transmission Training System Add- On to ( )

AC Power Transmission Training System Add- On to ( ) AC Power Transmission Training System Add- On to 8006 587433 (89252-00) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 03/2019 Table of Contents General Description 2 List of Equipment 2 List

More information

Introduction to Robotics

Introduction to Robotics Mechatronics Introduction to Robotics Courseware Sample 39411-F0 Order no.: 39411-00 First Edition Revision level: 02/2015 By the staff of Festo Didactic Festo Didactic Ltée/Ltd, Quebec, Canada 2007 Internet:

More information

PlantPAx Distributed Control System (DCS) Demonstrator - Pressure, Flow, Level, Temperature (3531-V0)

PlantPAx Distributed Control System (DCS) Demonstrator - Pressure, Flow, Level, Temperature (3531-V0) PlantPAx Distributed Control System (DCS) Demonstrator - Pressure, Flow, Level, Temperature 589631 (3531-V0) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 04/2019 Table of Contents General Description

More information

Orbit Simulator Software (9581-H0)

Orbit Simulator Software (9581-H0) Orbit Simulator Software 581901 (9581-H0) LabVolt Series Datasheet Festo Didactic en 04/2019 Table of Contents General Description 2 Telemetry and Instrumentation 2 Data Transfer 3 Orbit Simulator 5 Topic

More information

Electricity and Electronics Training System - Module 1 and 2

Electricity and Electronics Training System - Module 1 and 2 Electricity and Electronics Training System - Module 1 and 2 LabVolt Series Datasheet Festo Didactic en 03/2018 Table of Contents General Description 2 List of Manuals 2 Table of Contents of the Manual(s)

More information

Antenna Training and Measuring System

Antenna Training and Measuring System Antenna Training and Measuring System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 05/2018 Table of Contents General Description 2 Antennas 5 Features & Benefits 7 List of Equipment 8 List

More information

9063-RC Data Acquisition and Control Interface

9063-RC Data Acquisition and Control Interface 9063-RC Data Acquisition and Control Interface LabVolt Series Datasheet Festo Didactic en 230 V - 50 Hz 11/2017 Table of Contents General Description 2 LVDAC-EMS 2 Metering 3 Oscilloscope 3 Phasor Analyzer

More information

A Automation and Robotics CNC LATHE SYSTEM (LIGHT DUTY) MODEL 5300

A Automation and Robotics CNC LATHE SYSTEM (LIGHT DUTY) MODEL 5300 A Automation and Robotics CNC LATHE SYSTEM (LIGHT DUTY) MODEL 5300 GENERAL DESCRIPTION The CNC Lathe System (Light Duty), Model 5300, provides training in computer-aided design (CAD) and computer-aided

More information

Exercise 10. Linear Slides EXERCISE OBJECTIVE

Exercise 10. Linear Slides EXERCISE OBJECTIVE Exercise 10 Linear Slides EXERCISE OBJECTIVE In this exercise, you will learn to use a linear slide. You will learn how to use the Linear Slide, Model 5209, to extend the work envelope of the Servo Robot.

More information

Familiarization with the Servo Robot System

Familiarization with the Servo Robot System Exercise 1 Familiarization with the Servo Robot System EXERCISE OBJECTIVE In this exercise, you will be introduced to the Lab-Volt Servo Robot System. In the Procedure section, you will install and connect

More information

DC and AC Power Circuits Training System

DC and AC Power Circuits Training System DC and AC Power Circuits Training System LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 06/2018 Table of Contents General Description 2 Courseware 3 Modular Approach 4 elearning Formats 4 Features

More information

Satellite Communications Training System

Satellite Communications Training System Satellite Communications Training System LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/208 Table of Contents General Description 2 System Configurations and Capabilities 3 Topic Coverage

More information

FLEXIBLE MANUFACTURING SYSTEM. Teacher's Guide. SCORBOT-ER 4u and spectralight 200

FLEXIBLE MANUFACTURING SYSTEM. Teacher's Guide. SCORBOT-ER 4u and spectralight 200 teklink FLEXIBLE MANUFACTURING SYSTEM SCORBOT-ER 4u and spectralight 200 Teacher's Guide Catalog # 100351 Rev.A March 2002 Copyright 2002 Intelitek Inc. Catalog No. 100351 Rev. A March 2002 Flexible Manufacturing

More information

Table of Contents. Lucas Nülle GmbH Page 1/75

Table of Contents. Lucas Nülle GmbH Page 1/75 Table of Contents Table of Contents Automation Technology CIM Computer Integrated Manufacturing CIM 1-2 Individual components used in machining CIM 1 Lathe machine CIM 2 Milling machine CIM 11-23 Examples

More information

MECHATRONICS IN A BOX

MECHATRONICS IN A BOX MECHATRONICS IN A BOX A Complete Mechatronics Solution for the Classroom amtekcompany.com Contents Introduction Programming Arduino microcontrollers Motor Control Training Course Flowcode 8 Formula AllCode

More information

Exercise 1-1. Control of the Robot, Using RoboCIM EXERCISE OBJECTIVE

Exercise 1-1. Control of the Robot, Using RoboCIM EXERCISE OBJECTIVE Exercise 1-1 Control of the Robot, Using RoboCIM EXERCISE OBJECTIVE In the first part of this exercise, you will use the RoboCIM software in the Simulation mode. You will change the coordinates of each

More information

Exercise 2. Point-to-Point Programs EXERCISE OBJECTIVE

Exercise 2. Point-to-Point Programs EXERCISE OBJECTIVE Exercise 2 Point-to-Point Programs EXERCISE OBJECTIVE In this exercise, you will learn various important terms used in the robotics field. You will also be introduced to position and control points, and

More information

Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany.

Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. PROXXON - PD 400/CNC 1 Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. Z-axis and X-axis with recirculating ball spindles and two powerful step motors.

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

Handling station. Ruggeveldlaan Deurne tel

Handling station. Ruggeveldlaan Deurne tel Handling station Introduction and didactic background In the age of knowledge, automation technology is gaining increasing importance as a key division of engineering sciences. As a technical/scientific

More information

CHAPTER 5 INDUSTRIAL ROBOTICS

CHAPTER 5 INDUSTRIAL ROBOTICS CHAPTER 5 INDUSTRIAL ROBOTICS 5.1 Basic of Robotics 5.1.1 Introduction There are two widely used definitions of industrial robots : i) An industrial robot is a reprogrammable, multifunctional manipulator

More information

UNIT-1 INTRODUCATION The field of robotics has its origins in science fiction. The term robot was derived from the English translation of a fantasy play written in Czechoslovakia around 1920. It took another

More information

Easy-To-Use Graphic Interface

Easy-To-Use Graphic Interface Graphical Robot Programming Teachbox for Robot W 711 The Wittmann CNC 6.2 robot control with color graphics screens allows simpler robot teaching and use than ever before. The operator simply traces out

More information

MECHATRONICS SYSTEM DESIGN

MECHATRONICS SYSTEM DESIGN MECHATRONICS SYSTEM DESIGN (MtE-325) TODAYS LECTURE Control systems Open-Loop Control Systems Closed-Loop Control Systems Transfer Functions Analog and Digital Control Systems Controller Configurations

More information

HALTER AUTOMATION. It s gripping stuff...

HALTER AUTOMATION. It s gripping stuff... HALTER AUTOMATION It s gripping stuff... Hyfore is the UK distributor for Halter CNC Automation, the Netherlands based supplier of machine tool robotic loading and unloading systems. Sitting alongside

More information

DuraTurn Series. CNC Lathe. для получения подробной информации, пожалуйста, напишите нам на почту

DuraTurn Series. CNC Lathe. для получения подробной информации, пожалуйста, напишите нам на почту DuraTurn 2030 DuraTurn 2050 DuraTurn 2550 CNC Lathe DuraTurn Series Durable Universal Reliable Affordable Accurate CNC Lathe with Excellent Operability and Machining Capability The DuraTurn series, which

More information

Introduction to Robotics in CIM Systems

Introduction to Robotics in CIM Systems Introduction to Robotics in CIM Systems Fifth Edition James A. Rehg The Pennsylvania State University Altoona, Pennsylvania Prentice Hall Upper Saddle River, New Jersey Columbus, Ohio Contents Introduction

More information

Chapter 14 Automation of Manufacturing Processes and Systems

Chapter 14 Automation of Manufacturing Processes and Systems Chapter 14 Automation of Manufacturing Processes and Systems Topics in Chapter 14 FIGURE 14.1 Outline of topics described in this chapter. Date 1500Ğ1600 1600Ğ1700 1700Ğ1800 1800Ğ1900 Development Water

More information

Flexible Manufacturing Systems (FMS)

Flexible Manufacturing Systems (FMS) Flexible Manufacturing Systems (FMS) Bridging the Gap Between Classroom and Industry Flexible solutions for educating and training students in the principles and technologies of advanced manufacturing

More information

Tool Room Training Centre

Tool Room Training Centre Tool Room Training Centre SL NO. NAME OF THE MACHINE SUPPLIER SECTION QUANTITY 1 Lathe machine PRACTION (BANKA Conventional 2 40) 2 Lathe machine PRACTION (PIONEER) Conventional 2 3 Vertical knee & column

More information

Weeke Machining Center, Model BP-100 Optimat

Weeke Machining Center, Model BP-100 Optimat This PDF file has not been verified for accuracy. BEFORE BIDDING, all bidders should use the inspection period to verify specifications. Weeke Machining Center, Model BP-100 Optimat Weeke's BP-100 is a

More information

ROBOTICS. Intelitek's skill-based curriculum include a comprehensive range of competencies that prepare students for jobs in industry.

ROBOTICS. Intelitek's skill-based curriculum include a comprehensive range of competencies that prepare students for jobs in industry. ROBOTICS Since 1982, Intelitek s unmatched and worldrenowned ScorBot robotic training system, brings the exciting field of industrial robotics to your educational program. Intelitek's skill-based curriculum

More information

العطاء رقم )7106/67( الخاص بشراء أجهز لقسم الهندسة الكهربائية على حساب البحث العلمي

العطاء رقم )7106/67( الخاص بشراء أجهز لقسم الهندسة الكهربائية على حساب البحث العلمي العطاء رقم )7106/67( الخاص بشراء أجهز لقسم الهندسة الكهربائية على حساب البحث العلمي رقم )7107/363( Page 1 of 6 1- Mechatronics Actuators Board & Mechatronics Systems Board with Education Laboratory for

More information

The Datasheet and Interfacing EE3376

The Datasheet and Interfacing EE3376 The Datasheet and Interfacing EE3376 MSP430 Datasheet Modes of the MSP430 Active Mode (this class) LPM0 (CPU asleep) LPM3 (only ACLK on) LPM4 (sleep mode) 0 0 0 0 250uA 0 0 0 1 35 ua 1 1 0 1 1 ua 1 1 1

More information

Multi-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application

Multi-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement

More information

Chapter 1 Introduction

Chapter 1 Introduction Chapter 1 Introduction It is appropriate to begin the textbook on robotics with the definition of the industrial robot manipulator as given by the ISO 8373 standard. An industrial robot manipulator is

More information

Spare Parts. Contents. Contents Contents

Spare Parts. Contents. Contents Contents Spare Parts 2013 Spare Parts Contents Contents Contents LEGO Education StoryStarter 3 LEGO Education WeDo 4 Machines and Mechanisms 5 LEGO MINDSTORMS Education 6-8 TETRIX by Pitsco 9-16 LEGOeducation.us

More information

The Torxis Linear Servo meets the following environmental conditions:

The Torxis Linear Servo meets the following environmental conditions: Page: 1 1. PRODUCT DESCRIPTION The Torxis Linear Servo is the second generation of linear servos provided by GearWurx. This product features internal position sensing, and closed loop position control.

More information

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Specifications for the InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Industrial quality. 100% duty cycle. Production ready. The InTurn series is the only CNC mill accessory that provides both

More information

DUGARD. Machine Tools Since Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines.

DUGARD. Machine Tools Since Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines. DUGARD Machine Tools Since 1939 Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines www.dugard.com Dugard HBM-4 Horizontal Borer Rotary Table Spindle (BT) Gear Box ATC 60 Tools (OPT) Heavy Loading capacity

More information

USA. HALTER LoadAssistant. For loading batches from 10 to 1,000 workpieces

USA. HALTER LoadAssistant. For loading batches from 10 to 1,000 workpieces USA HALTER LoadAssistant For loading batches from 10 to 1,000 workpieces THE HALTER LOADASSISTANT IS SIMPLE, FULLY CONFIGURED, READY FOR YOUR USE AND IT CAN BE CONNECTED TO ANY NEW OR EXISTING CNC MACHINE.

More information

QIROX : The system for automated welding and cutting.

QIROX : The system for automated welding and cutting. QIROX 217 QIROX : The system for automated welding and cutting. QIROX is the new CLOOS product brand comprising all solutions for automated welding and cutting. Due to its modular design, the QIROX system

More information

For Experimenters and Educators

For Experimenters and Educators For Experimenters and Educators ARobot (pronounced "A robot") is a computer controlled mobile robot designed for Experimenters and Educators. Ages 14 and up (younger with help) can enjoy unlimited experimentation

More information

Servomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine.

Servomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine. Multipurpose Milling Machine Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Servo motors and preloaded ball screws on all axes infinitely

More information

CM6200 MILLING MACHINE

CM6200 MILLING MACHINE CM6200 MILLING MACHINE PORTABLE ON - SITE MACHINING SOLUTIONS FOR LARGE FLANGE MACHINING Quality Machine Design Provides Rigid, Power-Packed Performance Extraordinarily rigid design ensures consistent,

More information

Mechatronics Project Report

Mechatronics Project Report Mechatronics Project Report Introduction Robotic fish are utilized in the Dynamic Systems Laboratory in order to study and model schooling in fish populations, with the goal of being able to manage aquatic

More information

Four-Quadrant Dynamometer/Power Supply

Four-Quadrant Dynamometer/Power Supply Four-Quadrant Dynamometer/Power Supply LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 05/2018 Table of Contents General Description 3 Four-Quadrant Dynamometer/Power Supply 4 Model Variants 5

More information

MultiLine MS52C3. CNC Multi Spindle Turning Machine

MultiLine MS52C3. CNC Multi Spindle Turning Machine MultiLine MS52C3 CNC Multi Spindle Turning Machine MultiLine MS52C3 INDEX CNC multi-spindle machines: The standard to beat! With the totally configurable MS52C3, we offer a machine concept that meets all

More information

Low cost bench-top 5/6 axis general purpose articulated robot arm

Low cost bench-top 5/6 axis general purpose articulated robot arm Low cost bench-top 5/6 axis general purpose articulated robot arm Description R17 (Deucaleon) is a low cost entry to robotics, fast, accurate and reliable and easy to program. It has a long reach and therefore

More information

n Measurable displacements between n Linearity: max. ± 0.05 % n Housing diameter 12.9 mm n Service life: 10 8 movements

n Measurable displacements between n Linearity: max. ± 0.05 % n Housing diameter 12.9 mm n Service life: 10 8 movements Potentiometric Displacement Sensor Miniature design Model 8709 Code: Delivery: Warranty: 8709 EN ex stock 24 months Application Potentiometric displacement sensors are used for direct, precise measurement

More information

Weeke CNC Machining Center, Model BHC 500 T

Weeke CNC Machining Center, Model BHC 500 T Ph# 214.295.7331 Email: info@sismachinery.com DISCLAIMER: These are the ORIGINAL TECHNICAL SPECIFICATIONS of THIS NOW USED MACHINE. This does NOT guarantee or warranty the machine to be exactly as described

More information

Since FLEXIBLE MANUFACTURING SYSTEM

Since FLEXIBLE MANUFACTURING SYSTEM Since 1992 www.hytecheducation.in FLEXIBLE MANUFACTURING SYSTEM Flexible Manufacturing System with Conveyor Floor mounted machines Vertical axes are with brake motors Pneumatic grippers for loading and

More information

Weeke CNC Machining Center, Model BHC 350 4/10 Optimat

Weeke CNC Machining Center, Model BHC 350 4/10 Optimat Technical Specification March 11, 2004 Page 1 Weeke CNC Machining Center, Model BHC 350 4/10 Optimat Weeke's BHC 350 4/10 Optimat is a flexible CNC machining center designed primarily for routing, boring,

More information

Assembly Guide Robokits India

Assembly Guide Robokits India Robotic Arm 5 DOF Assembly Guide Robokits India info@robokits.co.in Robokits World http://www.robokitsworld.com http://www.robokitsworld.com Page 1 Overview : 5 DOF Robotic Arm from Robokits is a robotic

More information

1 Robot Axis and Movement

1 Robot Axis and Movement 1 Robot Axis and Movement NAME: Date: Section: INTRODUCTION Jointed arm robots are useful for many different tasks because of its range of motion and degrees of freedom. In this activity you will learn

More information

CNC TURNING CENTRES B750 B1250

CNC TURNING CENTRES B750 B1250 CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.

More information

Multipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine.

Multipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine. Multipurpose Milling Machine Conventional Multipurpose Milling Machine For workshop application, single parts production and training purposes Servo motors and preloaded ball screws on all axes Infinitely

More information

Standard specifications MG15HL*E58

Standard specifications MG15HL*E58 Standard specifications MG15HL*E58 1st Edition : 2nd Edition : January 15, 2018 January 18, 2019 KAWASAKI HEAVY INDUSTRIES, LTD. ROBOT DIVISION Specification : (Arm): * F,G,R,S (Controller): Materials

More information

9063 Data Acquisition and Control Interface

9063 Data Acquisition and Control Interface 9063 Data Acquisition and Control Interface LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 12/2017 Table of Contents General Description 2 9063 Data Acquisition and Control Interface 4 Variants

More information

KORE: Basic Course KUKA Official Robot Education

KORE: Basic Course KUKA Official Robot Education Training KUKAKA Robotics USA KORE: Basic Course KUKA Official Robot Education Target Group: School and College Students Issued: 19.09.2014 Version: KORE: Basic Course V1.1 Contents 1 Introduction to robotics...

More information

Teciam. Part K. Robotics

Teciam. Part K. Robotics Part K > Basic Technologies > Contents Table of Contents Introduction Introduction... K-3 Training Approach Training Approach... K-3 Modular Production System Modular Production System MPS... K-4 Technology

More information

XL Manufacturing Systems. Highly productive machining solutions for complex metal cutting tasks. Individual Systems

XL Manufacturing Systems. Highly productive machining solutions for complex metal cutting tasks. Individual Systems XL Manufacturing Systems Highly productive machining solutions for complex metal cutting tasks Individual Systems XL MANUFACTURING SYSTEMS ELHA-MASCHINENBAU The company ELHA-MASCHINENBAU Liemke KG is a

More information

PRODUCTS AND LAB SOLUTIONS

PRODUCTS AND LAB SOLUTIONS PRODUCTS AND LAB SOLUTIONS Answering the most challenging academic questions with innovative technology and methods Quanser is the global leader in the design and manufacture of lab solutions and products

More information

Data Acquisition and Control Interface

Data Acquisition and Control Interface Data Acquisition and Control Interface LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 05/2018 Table of Contents General Description 2 Model 9063 Data Acquisition and Control Interface 4 Model

More information

Optical Kit Encoder Page 1 of 11. Description. Mechanical Drawing. Features

Optical Kit Encoder Page 1 of 11. Description. Mechanical Drawing. Features Description Page 1 of 11 The E3 is a high resolution rotary encoder with a molded polycarbonate enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder

More information

BLuAC5 Brushless Universal Servo Amplifier

BLuAC5 Brushless Universal Servo Amplifier BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives

More information

2 Robot Pick and Place

2 Robot Pick and Place 2 Robot Pick and Place NAME: Date: Section: INTRODUCTION Robotic arms are excellent for performing pick and place operations such as placing small electronic components on circuit boards, as well as large

More information

Budget Robotics Octabot Assembly Instructions

Budget Robotics Octabot Assembly Instructions Budget Robotics Octabot Assembly Instructions The Budget Robotics Octabot kit is a low-cost 7" diameter servo-driven robot base, ready for expansion. Assembly is simple, and takes less than 15 minutes.

More information

DRILLFLEX CNC HORIZONTAL MACHINING CENTER

DRILLFLEX CNC HORIZONTAL MACHINING CENTER DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic

More information

Computer Numeric Control

Computer Numeric Control Computer Numeric Control TA202A 2017-18(2 nd ) Semester Prof. J. Ramkumar Department of Mechanical Engineering IIT Kanpur Computer Numeric Control A system in which actions are controlled by the direct

More information

Perfectly integrated!

Perfectly integrated! Servo drive CMMT-AS and servo motor EMMT-AS Simply very functional! Perfectly integrated! Highlights Ideal with CPX-E or controllers from third-party suppliers Quick commissioning of the complete drive

More information

Presentation Temporary Presentation

Presentation Temporary Presentation Presentation 2017 Temporary Presentation 2014 12.08.2014 1 Company structure Sales & production subsidiary USA Sales subsidiary Germany Headquarters & production site Worldwide representation Custom designed

More information

BLuAC5 Brushless Universal Servo Amplifier

BLuAC5 Brushless Universal Servo Amplifier BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives

More information

The modular Mechatronics Training System mms 4.0: hands-on, flexible, scalable

The modular Mechatronics Training System mms 4.0: hands-on, flexible, scalable The modular Mechatronics Training System mms 4.0: hands-on, flexible, scalable 2 Drive & Control Academy Your Training Partner More knowledge, more benefits: Mechatronics to touch, understand, and use

More information

USA. HALTER LoadAssistant. For loading batches from 10 to 1,000 workpieces

USA. HALTER LoadAssistant. For loading batches from 10 to 1,000 workpieces USA HALTER LoadAssistant For loading batches from 10 to 1,000 workpieces THE HALTER LOADASSISTANT IS SIMPLE, FULLY CONFIGURED, READY FOR YOUR USE AND IT CAN BE CONNECTED TO ANY NEW OR EXISTING CNC MACHINE.

More information

Technical Specification

Technical Specification Technical Specification Machining line English 10 / 2008 Machining line Machining line TEKNA was established in 1964 to produce efficient aluminum machining systems. The major role played by this material

More information

IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning

IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning SENSORS AND TRANSDUCERS TRAINER IT.MLD900 The s and Instrumentation Trainer introduces students to input sensors, output actuators, signal conditioning circuits, and display devices through a wide range

More information

Teciam. Part L. CNC Technology

Teciam. Part L. CNC Technology Teciam Part L Teciam > Basic Technologies > Contents Table of Contents Introduction Introduction... L-3 Training Approach Training Approach... L-3 Diversified Training Diversified Training... L-4 Technology

More information

[ means: One-stop shop. EMCOMAT FB-450 L / FB-600 L. Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle

[ means: One-stop shop. EMCOMAT FB-450 L / FB-600 L. Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle [ E[M]CONOMY] means: One-stop shop. EMCOMAT FB-450 L / FB-600 L Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle EMCOMAT FB-450 L / FB-600 L Whether single or small series production,

More information

P225 STANDARD FEATURES OPTIONAL FEATURES

P225 STANDARD FEATURES OPTIONAL FEATURES CIRCULAR COLD SAWS P225 Manually operated Robust sawing head miters 45 left Bench top model no base Single blade speed of 1 HP Manual vise Material work stop rod for multiple cuts of the same length Flood

More information

Robotics: Applications

Robotics: Applications Lecture 01 Feb. 04, 2019 Robotics: Applications Prof. S.K. Saha Dept. of Mech. Eng. IIT Delhi Outline Introduction Industrial applications Other applications Summary Introduction 90% robots in factories:

More information

Job Sheet 3. Using the Machine Vision System OBJECTIVE PROCEDURE. Setup and connections

Job Sheet 3. Using the Machine Vision System OBJECTIVE PROCEDURE. Setup and connections Job Sheet 3 Using the Machine Vision System OBJECTIVE Install the Machine Vision System on the Flexible Manufacturing System and use it to perform quality control on the boxes filled with marbles. PROCEDURE

More information

STA Series. Single Phase AC Spot Weld Control

STA Series. Single Phase AC Spot Weld Control STA Series Single Phase AC Spot Weld Control The STA-Series welders are the most advanced, yet simplest welding controls on the market. They feature an intuitive, easy-to-use programming interface and

More information

FluidSIM 4 The training-all-rounder

FluidSIM 4 The training-all-rounder FluidSIM 4 The training-all-rounder Two outstanding companions for successful training: FluidSIM 4.0 and the poster set for pneumatics and hydraulics Draw like a CAD pro The speed is no magic We are constantly

More information

Chapter 1 Introduction to Robotics

Chapter 1 Introduction to Robotics Chapter 1 Introduction to Robotics PS: Most of the pages of this presentation were obtained and adapted from various sources in the internet. 1 I. Definition of Robotics Definition (Robot Institute of

More information

MC-40 CNC PUNCH. Efficient, Quality Bus Bar Production

MC-40 CNC PUNCH. Efficient, Quality Bus Bar Production Jin FangYuan CNC Machine Company., Ltd (JFY) is one of the premier fabrications machine tool builders in Asia. Annually, they produce over,000 CNC fabricating machine tools. M & E Values, Inc. is proud

More information

SPLIT FRAME CUTTING & BEVELING MACHINES

SPLIT FRAME CUTTING & BEVELING MACHINES SPLIT FRAME CUTTING & BEVELING MACHINES 1-48 WWW.BBPIPETOOLS.COM 713-747-8502 B&B Pipe & Industrial Tools 527 Michigan St South Houston, TX 77587 SPLIT FRAME CUTTING & BEVELING Portable O/D Locking Cold

More information

Milind R. Shinde #1, V. N. Bhaiswar *2, B. G. Achmare #3 1 Student of MTECH CAD/CAM, Department of Mechanical Engineering, GHRCE Nagpur, MH, India

Milind R. Shinde #1, V. N. Bhaiswar *2, B. G. Achmare #3 1 Student of MTECH CAD/CAM, Department of Mechanical Engineering, GHRCE Nagpur, MH, India Design and simulation of robotic arm for loading and unloading of work piece on lathe machine by using workspace simulation software: A Review Milind R. Shinde #1, V. N. Bhaiswar *2, B. G. Achmare #3 1

More information

Duality Lathe. CNC & Manually Operated Lathe. Product Datasheet.

Duality Lathe. CNC & Manually Operated Lathe. Product Datasheet. CNC & Manually Operated Lathe www.tormach.com OVERVIEW The is a revolutionary concept in machine tools. Used in combination with a PCNC 1100 mill, this integrated machine accessory can be operated in three

More information

Max. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers:

Max. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers: CYCLE-CONTROLLED PRECISION LATHE SE 320 NUMERIC Description The SE 320 NUMERIC machine is a universal CNC-lathe machine with digitally controlled drives and a cycle control for the processing of bottles

More information

ISA Series. resistance welding. Mid-Frequency Inverter Resistance Welding Control

ISA Series. resistance welding. Mid-Frequency Inverter Resistance Welding Control resistance welding ISA Series Mid-Frequency Inverter Resistance Welding Control 500, 1000, 2000 & 4000 Amp Primary Output Five Feedback Modes Built-in Current, Voltage, Power and Time monitor Pre-weld

More information