Tech Support Instructions for moving power on device

Transcription

1 Tech Support Instructions for moving power on device Dear Pre-K SPED Teachers: Please read below sent from Dearta regarding upgrades to the Teach Smart System: I wanted to give you some information regarding the Teach Smart system. I've spoken via and phone with Sarah (HATCH representative) after the 1/17/14 professional development and her return to the office. She informed me that there is an upgrade in the system from 1.0 to 2.0. However, the 2.0 will only be functional until around the middle of the year as there is a 3.0 version that will be available within the upcoming months. What Sarah has suggested is to wait until the summer to do the update to 3.0 and HATCH will do a refresher training at the beginning of the school year regarding any changes in functionality and operation of the system. There are very few changes from 1.0 to 2.0, mostly increased functionality and searching ability but they are pretty much identical. Neither of the upgrades have a difference with the content. However, the 3.0 will have a different menu system (quicker and more efficient access to activities), some changed icons and a newly created search button. She also recommends that the 2.0 be downloaded prior to the 3.0 in order to make the technical upgrade easier. ALSO: ATTACHED ARE THE INSTRUCTIONS FROM HATCH FOR MOVING THE POWER ON DEVICE FROM THE BOTTOM TO THE TOP OF THE SMART BOARD. Cecilia Nunez, Instructional Supervisor Miami-Dade County Public Schools Prekindergarten Program for Children with Disabilities 5555 SW 93 Avenue Miami, Fl Telephone: Fax: cnunez@dadeschools.net Florida s ESE Parent Survey Make Your Voice Heard! All Parents of Students with an IEP (PK-22) February 1st thru May 31st, 2014 Online Survey:

2 Moving your ECP w/uf65/75 Projectors 1. First remove the pen tray. a. You will need to disconnect the phone cable on the bottom right first b. Next pull down slightly on the two tabs on the bottom of the pen tray and pull toward you (opposite of the arrow direction below).

3 2. Now remove the screws on the left and right metal bracket where the pen tray was attached 3. You should not need to remove the board but you can by lifting it up about 3 and pulling away from the wall. Note: You may want a second person to help lift the board off the wall it weighs about 38 pounds 4. Now remove the ECP from the board. a. There should be two screws securing it in place once these are removed it will pull off easily Note: Do not remove any cables from the ECP. 5. Move the ECP up the side of the board the board to the top while guiding the cable(s). You can pull the bottom of the board out several inches if need be. 6. Once you have the ECP at the top in the position. Take a Phelps head screw driver and attach the screws to the top of the board. These screws are self-tapping and will go in to the plastic easily. DO NOT Drill in to your Smart Board with a power drill!

4 7. Now hang to board on the black plastic lip (if you removed it) Note: You may want a second person to help lift the board it weighs about 38 pounds 8. Now attach the screws on the left and right metal bracket where the pen tray was attached into the original holes 9. Connect the pen tray a. Align the pen try slots to the metal lips on the board and push the pen tray toward the board until it clicks b. Connect the phone cable to port 1 on the pen tray

5 10. Power on the system 11. Once the system is started press the two buttons on the front of the Pen Tray to calibrate 12. Once calibration is completed confirm the pens and touch are working like they should be