Technical specification FLUXUS Cryo. Non-invasive flow measurement of cryogenic liquids. Features. Applications

Transcription

1 FLUXUS Cryo Non-invasive flow measurement of cryogenic liquids FLUXUS Cryo extends the application range of the ultrasonic clamp-on flow measurement with WaveInjector Cryo to cryogenic temperatures up to -200 C. The patented mounting fixture thermally separates the ultrasonic transducers from the hot or cold pipe and at the same time ensures good acoustic contact. Therefore, FLXIM's standard transducers are suitable for long-term operation even at extremely cold temperatures. F721 Features Non-invasive measurement without contact to the fluid Fluid temperature range: C Transducers and mounting fixture can be fully integrated into the insulation Bidirectional measurement Paired and factory-calibrated transducers: no zeroizing necessary, excellent zero-point stability High repeatability of measurement results Highly reliable: maintenance-free, no moving or vibrating parts, dual-beam redundant measurement Operationally safe: no gaskets, no leakage points No pipework necessary for installation F801 Transmitters FLUXUS Cryo F809 Applications Flow measurement of: LNG Liquid ethane Liquid nitrogen Liquid oxygen Other cryogenic fluids Measurement with transducers mounted with WaveInjector Cryo Measurement with transducers mounted with WaveInjector Cryo and with insulation TSFLUXUS_CYO_V1-0N_Leu,

2 FLUXUS CYO Table of contents Typical measurement setup... 3 Flow transmitter F Technical data... 4 Dimensions " pipe mounting kit (optional)... 8 Terminal assignment... 9 Flow transmitter Technical data Dimensions Wall and 2 " pipe mounting kit Terminal assignment Flow transmitter F Technical data Dimensions Wall and 2 " pipe mounting kit Transducers Transducer selection Installation recommendation Technical data Transducer mounting fixture Coupling materials for transducers Connection systems Transducer cable Junction box Technical data Dimensions " pipe mounting kit (optional) Terminal assignment Transducer heating system (optional) Continous operation Cycle operation Technical data Insulation TSFLUXUS_CYO_ V1-0N_Leu,

3 FLUXUS Cryo Typical measurement setup transmitter JB0x JB0x transducer heating system power supply xample of a diagonal arrangement with 2 beams and transducer heating system TSFLUXUS_CYO_ V1-0N_Leu,

4 FLUXUS Cryo Flow transmitter F721 Technical data FLUXUS F721**-NNN*A F721**-NNN*S F721**-A20*S design standard field device field device with stainless steel housing measurement measurement principle flow velocity repeatability fluid temperature compensation accuracy 1 with standard calibration with advanced calibration (optional) with field calibration 2 flow transmitter power supply transit time difference correlation principle, automatic NoiseTrek selection for measurements with high gaseous or solid content m/s 0.15 % of reading ±0.01 m/s all acoustically conductive liquids with < 10 % gaseous or solid content in volume (transit time difference principle) corresponding to the recommendations in ANSI/ASM MFC ±1.6 % of reading ±0.01 m/s ±1.2 % of reading ±0.01 m/s ±0.5 % of reading ±0.01 m/s V/ Hz or V DC or V DC < 15 W 1, optional: 2 power consumption number of flow measuring channels damping s, adjustable measuring cycle (1 channel) Hz response time 1 s (1 channel), option: 20 ms housing material aluminum, powder coated stainless steel 316L (1.4404) degree of protection according IP66 IP66 to IC/N dimensions see dimensional drawing weight 5.4 kg 5.1 kg fixation wall mounting, optional: 2 " pipe mounting ambient temperature C (< -20 C without operation of the display) display 128 x 64 dots, backlight menu language nglish, German, French, Dutch, Spanish, Russian, Polish explosion protection transmitter - F721**-A20*S zone - 2 marking - II3G A T X II2D x na nc ic IIC T4 Gc x tb IIIC T 120 C Db T a C certification - IBxU11ATX1015 type of protection - gas: non sparking dust: protection by enclosure 1 for transit time difference principle, reference conditions and v > 0.15 m/s 2 reference uncertainty < 0.2 % 4 TSFLUXUS_CYO_ V1-0N_Leu,

5 FLUXUS Cryo FLUXUS F721**-NNN*A F721**-NNN*S F721**-A20*S measuring functions physical quantities totalizer calculation functions diagnostic functions data logger loggable values capacity communication (optional) service/diagnosis3 process integration (max. 1 optional) volumetric flow rate, mass flow rate, flow velocity, heat flow (if temperature inputs are installed) volume, mass, optional: heat quantity average, difference, sum (2 measuring channels necessary) sound speed, signal amplitude, SNR, SCNR, standard deviation of amplitudes and transit times all physical quantities, totalized values and diagnostic values max measured values measured value transmission, parametrization of the transmitter: -USB - thernet - BACnet MS/TP - BACnet IP (nonx) - M-Bus (nonx) - RS485 (ASCII sender) including parametrization of the transmitter: - Modbus RTU - Modbus TCP (nonx) -HART - Profibus PA -FF H1 serial data kit (optional) software FluxDiag: online diagnostics and report generation (min. Windows 7) сable USB cable3 outputs (optional) The outputs are galvanically isolated from the transmitter. number on request switchable current output All switchable current outputs are switched to active or passive mode at the same time. - range ma ( ma) - accuracy 0.04 % of reading ±3 μa - active output R ext < 350 Ω - passive output U ext = V, depending on R ext, R ext < 1 kω current output current output - range 0/ ma - accuracy 0.1 % of reading ±15 μa - active output R ext < 500 Ω - passive output U ext = V, depending on R ext, R ext < 1 kω current output I1 in HART mode - range ma - active output U int = 24 V - passive output U ext = V voltage output range V or V accuracy V: 0.1 % of reading ±1 mv V: 0.1 % of reading ±10 mv internal resistance R int = 500 Ω frequency output range khz open collector 24 V/4 ma, R int = 66.5 Ω binary output Reed relay 48 V/100 ma, R int = 22 Ω optorelay 26 V/100 ma binary output as alarm output - functions limit, change of flow direction or error binary output as pulse output mainly for totalizing - pulse value units - pulse width optorelay: ms Reed relay: ms 3 outside of explosive atmosphere (housing cover open) TSFLUXUS_CYO_ V1-0N_Leu,

6 FLUXUS Cryo FLUXUS F721**-NNN*A F721**-NNN*S F721**-A20*S inputs (optional) The inputs are galvanically isolated from the transmitter. number max. 4, on request temperature input type Pt100/Pt1000 connection 4-wire range C resolution 0.01 K accuracy ±0.01 % of reading ±0.03 K current input accuracy 0.1 % of reading ±10 μa active input U int = 24 V, R int = 50 Ω, P int < 0.5 W, not short-circuit proof - range ma passive input R int = 50 Ω, P int < 0.3 W - range ma voltage input range V accuracy 0.1 % of reading ±1 mv internal resistance R int = 1 MΩ binary input switching signal V, 1 ma functions - resetting the measured values - resetting the totalizers - stopping the totalizers - activation of the measuring mode for highly dynamic flows 6 TSFLUXUS_CYO_ V1-0N_Leu,

7 FLUXUS Cryo Dimensions FLUXUS F721**-****A 94 wall mount Ø Ø8.5 thread: 6x M20 x 1.5 cable gland: max. 6x M FLUXUS F721**-****S fixing holes for wall mounting 320 cable gland: max. 6x M20 with flat gasket and counter nut in mm TSFLUXUS_CYO_ V1-0N_Leu,

8 FLUXUS Cryo 2 " pipe mounting kit (optional) FLUXUS F721**-****A FLUXUS F721**-****S 8 TSFLUXUS_CYO_ V1-0N_Leu,

9 FLUXUS Cryo Terminal assignment FLUXUS F721 KL11 KL12 KL7 KL9 AV AVS AGN ARS AR BV BVS BGN BRS BR X_AV X_AR X_BV X_BR X2 X3 KL8 T1A T1B S1 T2A T2B T3A T3B T1a T1b S1 T2a T2b T3a T3b S3 T4A T4B S3 T4a T4b KL10 A+ B- P1+ P2+ P3+ P4+ P5a P6a P7a S S P1- P2- P3- P4- P5b P6b P7b KL4 P N(-) L(+) F721**-****S F721**-****A equipotential bonding terminal power supply terminal strip KL4 terminal connection (AC) connection (DC) P earth earth N(-) neutral - L(+) phase + transducers terminal strip KL11, KL12 extension cable (transducers *****8*, ****LI*, *****52) transducer cable (transducers *****52) transducer cable (transducers *****8*, ****LI*) measuring channel A measuring channel B measuring channel A measuring channel B terminal connection terminal connection terminal connection AV signal BV signal X_AV X_BV SMB connector AVS shield BVS shield X_AR X_BR SMB connector ARS shield BRS shield AR signal BR signal outputs 1 RS485, Modbus RTU, BACnet MS/ TP, Profibus, FF H1, M-Bus (optional) terminal strip KL9, KL10 terminal strip KL9, KL10 terminal connection terminal connection P1+...P4+, P1-...P4- current output, voltage output, frequency output, binary output A+ signal + (Reed relay) P5a...P7a, P5b...P7b binary output (optorelay) B- signal - S shield analog inputs 1 terminal strip KL7, KL8 temperature probe passive current source active current source terminal direct connection connection with extension cable connection of an active input connection of a passive input T1a...T4a red red not connected not connected T1A...T4A red/blue grey - + T1b...T4b white/blue blue + not connected T1B...T4B white white not connected - S1, S3 shield shield not connected not connected binary inputs 1 terminal strip KL9, KL10 terminal P1+...P2+, P1-...P2-1 The number, type and terminal assignment of the outputs and inputs will be customized. TSFLUXUS_CYO_ V1-0N_Leu,

10 FLUXUS Cryo Flow transmitter Technical data FLUXUS F801**-A10 F801C24 model code F801**-A10****-*A F801**-A10****-FF F801**-A1B F801**-A10****-*P design explosion proof offshore device measurement measurement principle flow velocity repeatability fluid temperature compensation accuracy 1 with standard calibration with advanced calibration (optional) with field calibration 2 flow transmitter power supply A T X / I C x transit time difference correlation principle, automatic NoiseTrek selection for measurements with high gaseous or solid content m/s 0.15 % of reading ±0.01 m/s all acoustically conductive liquids with < 10 % gaseous or solid content in volume (transit time difference principle) corresponding to the recommendations in ANSI/ASM MFC ±1.6 % of reading ±0.01 m/s ±1.2 % of reading ±0.01 m/s ±0.5 % of reading ±0.01 m/s V/ Hz or V DC or on request: V DC 24 V DC ±10 % power consumption < 8 W < 4 W number of flow measuring 1, optional: 2 channels damping s, adjustable measuring cycle (1 channel) Hz response time 1 s (1 channel), option: 70 ms housing material stainless steel 316/316L (1.4401, , ) degree of protection according IP66 to IC/N dimensions see dimensional drawing weight 6.6 kg fixation wall mounting, 2 " pipe mounting ambient temperature C C display 2 x 16 characters, dot matrix, backlight menu language nglish, German, French, Dutch, Spanish explosion protection zone 1 1 marking II2G II2D x d e IIC T6 Gb x tb IIIC T 100 C Db T a C II2G x d e [ib] IIC T4 Gb T a C certification ATX IBxU05ATX1078 IBxU05ATX1078 certification ICx ICx IB type of protection electronics compartment: flameproof enclosure connection compartment: increased safety intrinsic safety parameters - 1 for transit time difference principle, reference conditions and v > 0.15 m/s 2 reference uncertainty < 0.2 % electronics compartment: flameproof enclosure connection compartment: increased safety output circuits: intrinsic safety U m = 250 V AC intrinsically safe outputs: U i = 28.2 V P i = 0.76 W L i, C i negligible 10 TSFLUXUS_CYO_ V1-0N_Leu,

11 FLUXUS Cryo FLUXUS F801**-A10 F801C24 measuring functions physical quantities volumetric flow rate, mass flow rate, flow velocity totalizer volume, mass calculation functions average, difference, sum (2 measuring channels necessary) diagnostic functions sound speed, signal amplitude, SNR, SCNR, standard deviation of amplitudes and transit times data logger loggable values all physical quantities, totalized values and diagnostic values capacity > measured values communication interface - process integration (optional): - diagnosis: RS diagnosis: RS232 3 RS485 (sender) or Modbus RTU or HART - diagnosis: RS232 3 serial data kit (optional) software (all Windows versions) - FluxData: download of measurement data, graphical presentation, conversion to other formats (e.g. for xcel ) - FluxDiag (optional): online diagnostics and report generation - FluxSubstanceLoader: upload of fluid data sets сable RS232 3 adapter RS232 - USB 3 outputs (optional) The outputs are galvanically isolated from the transmitter. number current output: and binary output (open collector): or current output: and binary output (open collector): 1 and binary output (Reed relays): 1 current output frequency output: 1 and binary output (open collector): 1 current output: 1 and binary output (open collector): 1 current output I1, I2 - range 0/ ma ma - accuracy 0.1 % of reading ±15 μa % of reading ±15 μa - active output R ext < 500 Ω passive output U ext = V, depending on R ext R ext < 1 kω - U ext = V, depending on R ext R ext < 1 kω intrinsic safety current output I1 in HART mode - range ma passive output U ext = V - - frequency output range khz - open collector - 30 V/100 ma - I off = 0.8 ma optional: 8.2 V DIN N (NAMUR) binary output Reed relay 48 V/100 ma - - open collector 24 V/4 ma 30 V/100 ma I off = 0.8 ma 24 V/4 ma intrinsic safety binary output as alarm output - functions limit, change of flow direction or error open collector as pulse mainly for totalizing output - pulse value units - pulse width ms 3 connection of the interface RS232 outside of explosive atmosphere (housing cover open) TSFLUXUS_CYO_ V1-0N_Leu,

12 FLUXUS Cryo Dimensions FLUXUS F Ø thread: 4x M25 cable gland: max. 4x M20 in mm Wall and 2 " pipe mounting kit FLUXUS F TSFLUXUS_CYO_ V1-0N_Leu,

13 FLUXUS Cryo Terminal assignment FLUXUS F801**-A10****-*A FLUXUS F801**-A10****-*P! " # ) 8 ) 8 5 ) 4 5 ) 4 * 8 * 8 5 * 4 5 * 4! " # $ % & ' equipotential bonding terminal transducers outputs 2 - power supply power supply AC DC terminal connection terminal connection P earth P earth N neutral L- - L1 phase L+ + transducers measuring channel A measuring channel B terminal connection terminal connection AV transducer, signal BV transducer, signal AVS transducer, internal shield BVS transducer, internal shield ARS transducer, internal shield BRS transducer, internal shield AR transducer, signal BR transducer, signal cable gland external shield cable gland external shield outputs F801**-A10****-*A F801**-A10****-*P terminal connection terminal connection 1(-), 2(+) active current output I1 1(+), 2(-) passive current output I1 3(-), 4(+) active current output I2 (optional) 3(+), 4(-) passive current output I2 (optional) 5(-), 6(+) binary output B1 (open collector) 7(-), 8(+) binary output B2 (open collector, optional) 9(a), 10(b) binary output B1 (open collector, Reed relay, optional) 11(a), 12(b) binary output B2 (open collector, Reed relay, optional) 13(B-), 14(A+), communication interface 15 (shield) TSFLUXUS_CYO_ V1-0N_Leu,

14 FLUXUS Cryo FLUXUS F801C24 FLUXUS F801**-A10****-FF equipotential bonding terminal outputs partition (F801C24) transducers power supply power supply AC DC (F801**-A10****-FF) terminal connection terminal connection P earth P earth N neutral L- - L1 phase L+ + transducers measuring channel A measuring channel B terminal connection terminal connection AV transducer, signal BV transducer, signal AVS transducer, internal shield BVS transducer, internal shield ARS transducer, internal shield BRS transducer, internal shield AR transducer, signal BR transducer, signal S not connected S not connected cable gland external shield cable gland external shield outputs F801C24 F801**-A10****-FF colour of terminals blue (intrinsic safety) green terminal connection 1(-), 2(+) current output I1 frequency output F1 5(-), 6(+) binary output B1 (open collector) binary output B1 (open collector) 14 TSFLUXUS_CYO_ V1-0N_Leu,

15 FLUXUS Cryo Flow transmitter F809 Technical data FLUXUS F809**-A10 F809**-A1A design explosion proof field device 1 or 2 measuring channels zone 1 zone 1 (intrinsically safe current output) measurement measurement principle transit time difference correlation principle, automatic NoiseTrek selection for measurements with high gaseous or solid content flow velocity m/s repeatability 0.15 % of reading ±0.01 m/s fluid all acoustically conductive liquids with < 10 % gaseous or solid content in volume (transit time difference principle) temperature compensation corresponding to the recommendations in ANSI/ASM MFC accuracy 1 with standard calibration ±1.6 % of reading ±0.01 m/s with advanced calibration ±1.2 % of reading ±0.01 m/s (optional) with field calibration 2 ±0.5 % of reading ±0.01 m/s flow transmitter power supply V/ Hz or V DC V DC power consumption < 8 W number of flow measuring 1, optional: 2 channels damping s, adjustable measuring cycle (1 channel) Hz response time 1 s, option: 70 ms housing material cast aluminum, special offshore coating degree of protection according IP66 to IC/N dimensions see dimensional drawing weight 7.1 kg fixation wall mounting, 2 " pipe mounting operating temperature C (< -20 C without operation of the display) display 2 x 16 characters, dot matrix, backlight menu language nglish, German, French, Dutch, Spanish 1 for transit time difference principle, reference conditions and v > 0.15 m/s 2 reference uncertainty < 0.2 % TSFLUXUS_CYO_ V1-0N_Leu,

16 FLUXUS Cryo FLUXUS F809**-A10 F809**-A1A explosion protection zone 1 marking II2G II2G II2D II2D x db e IIC T6 Gb x tb IIIC T 100 C Db T a C A T X / I C x x db e ia IIC T6 Gb x tb ia IIIC T 100 C Db T a C certification ATX IBxU11ATX1022 X IBxU11ATX1022 X certification ICx ICx IB X ICx IB X type of protection gas: electronics compartment: flameproof enclosure, connection compartment: increased safety dust: protection by enclosure intrinsic safety parameters - measuring functions physical quantities totalizer calculation functions diagnostic functions data logger loggable values capacity communication interface serial data kit (optional) software (all Windows versions) gas: electronics compartment: flameproof enclosure, connection compartment: increased safety dust: protection by enclosure U m = 250 V U i = 30 V DC I i = 100 ma P i = 0.75 W C i = 3 nf volumetric flow rate, mass flow rate, flow velocity volume, mass average, difference, sum (2 measuring channels necessary) sound speed, signal amplitude, SNR, SCNR, standard deviation of amplitudes and transit times all physical quantities, totalized values and diagnostic values > measured values - process integration (optional): RS485 (sender) or Modbus RTU or HART - diagnosis: RS diagnosis: RS FluxData: download of measurement data, graphical presentation, conversion to other formats (e.g. for xcel ) - FluxDiag (optional): online diagnostics and report generation - FluxSubstanceLoader: upload of fluid data sets сable RS232 3 adapter RS232 - USB 3 3 connection of the interface RS232 outside of explosive atmosphere (housing cover open) 16 TSFLUXUS_CYO_ V1-0N_Leu,

17 FLUXUS Cryo FLUXUS F809**-A10 F809**-A1A outputs The outputs are galvanically isolated from the transmitter. number max. 4 1 current output number max. 2 - current output I1, I2 - - range 0/ ma - - accuracy 0.1 % of reading ±15 μa - - active output R ext < 500 Ω - - passive output U ext = V, depending on R ext, R ext < 1 kω - current output I1 in HART mode - range ma - - passive output U ext = V DC - - active output U int = 24 V - current output (intrinsic safety) number - 1 current output I1 - range ma - accuracy % of reading ±3 μa - passive output - U ext = V, depending on R ext, R ext < 1 kω current output I1 in HART mode - range ma - passive output - U ext = V DC frequency output number max. 1 - range khz - open collector 30 V/100 ma - or 8.2 V DIN N (NAMUR) or 24 V/4 ma (on request) binary output number max. 2 - Reed relay 48 V/100 ma - open collector 24 V/4 ma - optional: 30 V/100 ma or 8.2 V DIN N (NAMUR) binary output as alarm output - functions limit, change of flow direction or error - binary output as pulse output mainly for totalizing - pulse value units - - pulse width ms - TSFLUXUS_CYO_ V1-0N_Leu,

18 FLUXUS Cryo Dimensions FLUXUS F material: stainless steel 304 (1.4301) F809**-A1: thread, cable gland: 4x M20 x 1.5 F809**-A1: thread, cable gland: 2x M20 x 1.5 in mm Wall and 2 " pipe mounting kit 18 TSFLUXUS_CYO_ V1-0N_Leu,

19 FLUXUS Cryo Terminal assignment FLUXUS F809 equipotential bonding terminal upper housing, back view L N P (+) (-) outputs power supply transducers lower housing, front view AR ARS AVS AV BR BRS BVS BV equipotential bonding terminal (transducers) equipotential bonding terminal power supply AC DC terminal connection terminal connection L phase L+ + N neutral L- - P earth P earth transducers measuring channel A measuring channel B terminal connection terminal connection AV transducer, signal BV transducer, signal AVS transducer, internal shield BVS transducer, internal shield ARS transducer, internal shield BRS transducer, internal shield AR transducer, signal BR transducer, signal cable gland or equipotential bonding terminal (transducers) external shield cable gland or equipotential bonding terminal (transducers) external shield outputs terminal connection 1(-), 2(+) current output I1 frequency output F1 3(-), 4(+) current output I2 5(-), 6(+) binary output B1 (open collector) 7(-), 8(+) binary output B2 (open collector) 9(-), 10(+) binary output B1 (Reed relay) binary output B1 (open collector) A+, B-, S communication interface TSFLUXUS_CYO_ V1-0N_Leu,

20 FLUXUS Cryo Transducers Transducer selection for LNG, others on request outer pipe diameter mm, > 1000 mm on request transducer order code FSG FSK FSM FSP inner pipe diameter [mm] transducer order code FSG 11 FSK 5 FSM 2 FSP pipe wall thickness [mm] recommended possible Installation recommendation inner pipe diameter measurement arrangement number of sound paths min. number of measuring channels mm diagonal arrangement 3 1 > reflection arrangement 2 1 >180 diagonal arrangement TSFLUXUS_CYO_ V1-0N_Leu,

21 FLUXUS Cryo Technical data Shear wave transducers (zone 1) technical type CDG1N81 CDK1N81 CDM2N81 CDP2N81 order code FSG-NA1TS FSG-NA1TS/OS FSK-NA1TS FSK-NA1TS/OS FSM-NA1TS FSM-NA1TS/OS FSP-NA1TS FSP-NA1TS/OS transducer frequency MHz inner pipe diameter see Transducer selection pipe wall thickness min. mm material housing PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) contact surface PK PK PK PK degree of protection IP65 IP66 IP66 IP66 according to IC/ N transducer cable type length m dimensions length l mm width b mm height h mm dimensional drawing PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) h l l b b h h l l b b h weight (without cable) kg 0.47 kg 0.36 kg kg kg ambient temperature min. C max. C temperature compensation x x x x explosion protection category gas: 2G dust: 2D gas: 2G dust: 2D gas: 2G dust: 2D gas: 2G dust: 2D PL Gb Db Gb Db Gb Db Gb Db zone A T X / I C x explosion protection temperature (pipe surface) min. C max. C marking II2G II2G II2G II2G II2D II2D II2D II2D x e q IIC T6...T3 Gb x tb IIIC TX Db x e q IIC T6...T3 Gb x tb IIIC TX Db x e q IIC T6...T3 Gb x tb IIIC TX Db x e q IIC T6...T3 Gb x tb IIIC TX Db certification ATX IBxU07ATX1168 X IBxU07ATX1168 X IBxU07ATX1168 X IBxU07ATX1168 X certification ICx ICx IB X ICx IB X ICx IB X ICx IB X type of protection gas: increased safety, powder filling dust: protection by enclosure gas: increased safety, powder filling dust: protection by enclosure gas: increased safety, powder filling dust: protection by enclosure gas: increased safety, powder filling dust: protection by enclosure transducer mounting fixture necessary remark x x x x on request TSFLUXUS_CYO_ V1-0N_Leu,

22 FLUXUS Cryo Shear wave transducers (zone 2 or not explosion proof) technical type CDG1N52 CLG1N52 CDK1N52 CLK1N52 order code FSG-NA2TS FSG-NA2TS/OS FSG-NNNTS FSG-NNNTS/OS FSG-NA2TS/LC FSG-NA2TS/LC/OS FSG-NNNTS/LC FSG-NNNTS/LC/OS FSK-NA2TS FSK-NA2TS/OS FSK-NNNTS FSK-NNNTS/OS FSK-NA2TS/LC FSK-NA2TS/LC/OS FSK-NNNTS/LC FSK-NNNTS/LC/OS transducer frequency MHz inner pipe diameter see Transducer selection pipe wall thickness min. mm material housing PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) contact surface PK PK PK PK degree of protection IP67 IP67 IP67 IP67 according to IC/ N transducer cable type length m dimensions length l mm width b mm height h mm dimensional drawing PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) h l l b b h h l l b b h weight (without cable) kg 0.47 kg 0.47 kg 0.36 kg 0.36 kg ambient temperature min. C max. C temperature compensation x x x x explosion protection order code FSG-NA2TS FSG-NA2TS/LC FSK-NA2TS FSK-NA2TS/LC FSG-NA2TS/OS FSG-NA2TS/LC/OS FSK-NA2TS/OS FSK-NA2TS/LC/OS category gas: 3G dust: 2D gas: 3G dust: 2D gas: 3G dust: 2D gas: 3G dust: 2D PL Gc Db Gc Db Gc Db Gc Db zone A T X / I C x explosion protection temperature (pipe surface) min. C max. C gas: +190, dust: +180 gas: +190, dust: +180 gas: +190, dust: +180 gas: +190, dust: +180 marking II3G II3G II3G II3G II2D II2D II2D II2D x na IIC T6...T2 Gc x tb IIIC TX Db x na IIC T6...T2 Gc x tb IIIC TX Db x na IIC T6...T2 Gc x tb IIIC TX Db x na IIC T6...T2 Gc x tb IIIC TX Db certification ATX IBxU10ATX1163 X IBxU10ATX1163 X IBxU10ATX1163 X IBxU10ATX1163 X certification ICx ICx IB X ICx IB X ICx IB X ICx IB X type of protection gas: non sparking dust: protection by enclosure gas: non sparking dust: protection by enclosure gas: non sparking dust: protection by enclosure gas: non sparking dust: protection by enclosure transducer mounting fixture necessary x x x x 22 TSFLUXUS_CYO_ V1-0N_Leu,

23 FLUXUS Cryo Shear wave transducers (zone 2 or not explosion proof) technical type CDM2N52 CDP2N52 order code FSM-NA2TS FSM-NA2TS/OS FSM-NNNTS FSM-NNNTS/OS FSP-NA2TS FSP-NA2TS/OS FSP-NNNTS FSP-NNNTS/OS transducer frequency MHz 1 2 inner pipe diameter see Transducer selection pipe wall thickness min. mm 2 1 material housing PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) contact surface PK PK degree of protection IP67 IP67 according to IC/ N transducer cable type length m 4 4 dimensions length l mm width b mm height h mm dimensional drawing PK with stainless steel cap 304 (1.4301), option OS: 316L (1.4404) h l l b b h weight (without cable) kg kg kg ambient temperature min. C max. C temperature compensation x x explosion protection order code FSM-NA2TS FSP-NA2TS FSM-NA2TS/OS FSP-NA2TS/OS category gas: 3G dust: 2D gas: 3G dust: 2D PL Gc Db Gc Db zone A T X / I C x explosion protection temperature (pipe surface) min. C max. C gas: +190, dust: +180 gas: +190, dust: +180 marking II3G II3G II2D II2D x na IIC T6...T2 Gc x tb IIIC TX Db x na IIC T6...T2 Gc x tb IIIC TX Db certification ATX IBxU10ATX1163 X IBxU10ATX1163 X certification ICx ICx IB X ICx IB X type of protection gas: non sparking dust: protection by enclosure gas: non sparking dust: protection by enclosure transducer mounting fixture necessary x x TSFLUXUS_CYO_ V1-0N_Leu,

24 FLUXUS Cryo Transducer mounting fixture Order code no. of character description WaveInjector transducer measurement arrangement size fixation outer pipe diameter 1 coupling foil / WI-CYO type K shear wave transducers with transducer frequency G, K M shear wave transducers with transducer frequency M, P D reflection arrangement or diagonal arrangement L large C chains mm mm mm mm mm D coupling foil C A automatic WI tool M mechanical WI tool (pipe planer) O WIT-R tool 110 V R WIT-R tool 230 V N without tool B cryo insulation boxes for measuring channel (without transducer heating system) example WI-CYO M - D L - C D M / L WaveInjector Cryo for shear wave transducers with transducer frequency M, with chains, coupling foil and mechanical WI tool, transducer heating system (240 V) tool option 1 outer pipe diameter > 1000 mm on request WaveInjector WI-CYO l cp dimensions: h - length: 2. l + l cp l = 273 mm l cp = depending on application -width: outer pipe diameter + 32 mm (min. 203 mm) - height: outer pipe diameter + 2. h h = 285 mm material: stainless steel 304 (1.4301) l 24 TSFLUXUS_CYO_ V1-0N_Leu,

25 FLUXUS Cryo Coupling materials for transducers Technical data type ambient temperature material position C coupling foil type SI silicone coupling plate - transducer coupling foil type D indium pipe - coupling plate TSFLUXUS_CYO_ V1-0N_Leu,

26 FLUXUS Cryo Connection systems connection system TS connection with extension cable JB01 direct connection transducers technical type *****8* x l transmitter transmitter x JB02, JB03 x x *****52 l transmitter transmitter T S transducer frequency (3d character of transducer order code) F, G, H, K M, P Q S x l x l x l x l cable length m cable length (option LC) m x - transducer cable length l - max. length of extension cable Transducer cable Technical data transducer cable extension cable type ambient temperature C properties halogen free halogen free fire propagation test according to IC combustion test according to IC fire propagation test according to IC combustion test according to IC cable jacket material PTF PUR PUR outer diameter mm thickness mm colour brown black black shield x x x sheath material stainless steel 304 (1.4301) - steel wire braid with copolymer option OS: 316Ti (1.4571) sheath outer diameter mm TSFLUXUS_CYO_ V1-0N_Leu,

27 FLUXUS Cryo Junction box Technical data technical type JB01S43M JB02 JB03 dimensions see dimensional drawing see dimensional drawing see dimensional drawing weight kg 1.2 kg 1.2 kg 1.2 kg fixation Dimensions wall mounting, optional: 2 " pipe mounting wall mounting, optional: 2 " pipe mounting wall mounting, optional: 2 " pipe mounting material housing stainless steel 316L (1.4404) stainless steel 316L (1.4404) stainless steel 316L (1.4404) gasket silicone silicone silicone degree of protection IP67 IP67 IP67 according to IC/ N ambient temperature min. C max. C explosion protection zone A T X / I C x marking II2G II2D x e mb IIC (T6)...T4 Gb x tb IIIC T 100 C Db Ta (70)80 C II3G x na IIC (T6)...T4 Gc II3D x tc IIIC T 100 C Dc Ta (70)80 C certification ATX IBxU06ATX certification ICx ICx IB type of protection gas: increased safety decoupled network: encapsulation dust: protection by enclosure gas: non sparking dust: protection by enclosure - - wall mounting holder Ø thread: 3x M20 x 1.5 cable gland: max. 2x M20 in mm TSFLUXUS_CYO_ V1-0N_Leu,

28 8 4 FLUXUS Cryo 2 " pipe mounting kit (optional) Terminal assignment JB / 6 / shield terminal equipotential bonding terminal (at wall mounting holder) transducers terminal strip KL1 terminal connection V transducer, signal VS transducer, internal shield RS transducer, internal shield R transducer, signal cable gland external shield extension cable terminal strip KL2 terminal TV TVS TRS TR shield terminal connection signal internal shield internal shield signal external shield JB02, JB / 6 / transducers terminal connection XV transducer, SMB connector XR transducer, SMB connector cable gland external shield shield terminal : 8 : 4 extension cable terminal strip KL2 terminal TV TVS TRS TR shield terminal connection signal internal shield internal shield signal external shield equipotential bonding terminal (at wall mounting holder) 28 TSFLUXUS_CYO_ V1-0N_Leu,

29 FLUXUS Cryo Transducer heating system (optional) Continous operation fluid temperature < -40 C: transducer heating system required Cycle operation operating time in cycle operation > 12 h: transducer heating system required operating time in cycle operation < 12 h and rest period 2x operating time: see table below fluid ambient temperature temperature C C x x x x x x -190 x x x x x x -180 x x x x x -170 x x x x x -160 x x x x -150 x x x x -140 x x x x -130 x x x -120 x x x -110 x x -100 x x -90 x x -80 x -70 x x - transducer heating system required Technical data type BARTC PSB order code ACC-P-Fxxx-CY1 (1 measuring channel) ACC-P-Fxxx-CY2 (2 measuring channels) ACC-P-Fxxx-CY3 (1 measuring channel) ACC-P-Fxxx-CY4 (2 measuring channels) power supply 240 V AC 120 V AC consisting of - heating element PSB 33, PSB 33, connection system PLXO TCS P PLXO TCS P junction box PSB / /2090 explosion protection ATX, ICx, TR TS Cable junction box PSB - heating element type H05SS-F length m 10 max. length m on request weight kg/m 0.11 ambient temperature C installation C temperature bend radius 7.5 D properties cable jacket material rubber outer diameter D mm colour black shield - TSFLUXUS_CYO_ V1-0N_Leu,

30 FLUXUS Cryo Insulation h i h insulation height: h i = max. 185 mm height h: - with transducer heating system: h < 30 mm - without transducer heating system: h 100 mm 30 TSFLUXUS_CYO_ V1-0N_Leu,

31 FLUXUS Cryo FLXIM GmbH Wolfener Str. 36 internet: Berlin 117 Germany Tel.: +49 (30) Fax: +49 (30) Subject to change without notification. rrors excepted. FLUXUS is a registered trademark of FLXIM GmbH. TSFLUXUS_CYO_ V1-0N_Leu,