SITRANS F flowmeters SITRANS F US. SONOFLO SONO 3000 transmitter. 4/152 Siemens FI Overview

Transcription

1 Overview Design The transmitter is available in different enclosure to fit any demands: IP67 enclosure for compact or wall mounting IP00 as a 19 insert IP65 for wall mounting IP65 enclosure in stainless steel for EEx application Function Keypad Sono 3000 is a transit time based transmitter designed for ultrasonic flowmetering on any pipe in the SONO series up to DN 000. SONO 3000 is a microprocessor based transmitter engineered for high performance, easy installation, commissioning and maintenance, suitable for 1, 2 or track flowmeters. Benefits Superior signal resolution for optium turn down ratio Unique correlation signal ensures realiable signal detection Digital processing with many possibilities Automatic reading of SENSORPROM data for easy commissioning User configurable operation menu with password protection Multiple functional output for process control, minimum configuration Pulse/frequency and relay output (status, flow direction, limits) Comprehensive self diagnostic for error indication and error logging Custody transfer approval: PTB class C, OIML R75 class Application The SONO 3000 ultrasonic transmitter is suitable for processing the flow of any conductive or nonconductive liquids with max. 2% solids, 2% air and gas and a viscosity of max. 350 cst. The main application can be found in: Water and wastewater industries Chemical and pharmaceutical industries District heating applications Cooling water plants Oil and refinery Cryogenics Utility Keypad The keypad is used to set the flowmeter. The function of the keys is as follows: Name Sign Function TOP UP Back to the OPERATOR MENU PAGE FORWARD Step forward through the menues PAGE BACKWARD Step backward through the menues CHANGE Change the settings or numerical values SELECT Select the figures to be changed LOCK/UNLOCK Allow to change settings, access to submenues Settings are stored automatically in the transmitter and in the SENSORPROM flow memory unit. The values remain stored in the event of power failure and when a transmitter is replaced. Operation of any key illuminates the display. The light is automatically turned off 10 minutes after last key operation. Technical specifications Signal transmitter SONO 3000 Technical specifications for all versions Analog output Measurement of (optional via menu) Current Load Time constant Frequency/pulse output Measurement of (optional via menu) Individually galvanically isolated, isolation voltage 500 V Volume flow Sound velocity 0/ 20 ma < 800 Ω s, adjustable Individually galvanically isolated, isolation voltage 500 V Volume flow Sound velocity Total volume Total mass /152 Siemens FI

2 Technical specificatios (continued) Frequency Time constant Pulse width Output mode Active Passive Relay Transmitter SONO 3000, IP kHz s, adjustable 50 µs, 500 µs, 5 ms, 20 ms, 50 ms, 100 ms, 500 ms, 1 s, 5 s 2 30 V DC / 25 ma max. (pulse width : 50 µs 5s) (50 ms electromechanical counter, 75 ma max. if f < 1 Hz) 2 30 V DC / 50 ma max. (f: 500 Hz 10 khz) V DC / 200 ma max. Change over relay (error indication, flow direction, sound velocity limit) Load 2V, 0.5A Time constant / Hysteresis 5 s / 0.5% F.S.O. Cut-off Low Flow, 0 9.9% F.S.O. Supply voltage and power consumption Internal counters (totalizers) Measurement of: V AC +10/-15%, Hz, VA 2 V DC +25/-15%, 2 V AC ±15%, 10 VA 2, selectable uni- or bidirectional counting (net flow) Total volume Display Back-lit, alphanumeric, 2 x 16 digit For indication of: measured values, totalization, settings, error codes and alarms Enclosure IP67 to IEC and DIN 0050 Material Fibre class reinforced polyamide Mechanical vibration 2 g, Hz, sinusoidal in all directions to IEC Ambient temperature Operation C ( F) Storage C( F) Dimensions See dimensional drawing CE-mark EMC Emission EN Immunity EN Low voltage According to EN Supply voltage and power consumption Transmitter SONO 3000, IP65, wall mounting V AC +10/-15%, Hz, VA 2 V DC +25/-15%, 2 V AC ±15%, 10 VA Cable impedance < 7 Ω at 2 V Enclosure IP65 to IEC and DIN 0050 Material ABS plastic Mechanical vibration 1 g, Hz, sinusoidal in all directions to IEC Ambient temperature Operation C ( F) Storage C( F) CE-mark EMC Emission EN Immunity EN Low voltage According to EN Supply voltage and power consumption 115/230 V AC +10/-15%, Hz, VA 2 V DC +25/-15%, 2 V AC ±15%, 10 VA Cable impedance < 7 Ω at 2 V Siemens FI /153

3 Transmitter SONO 3000, EEx-d version, wall mounting Transmitter SONO 3000, 19 insert Enclosure EEx-d version, wall mounting Separate mounted IP65 to IEC and DIN 0050 Material AISI 316 and Duplex Mechanical vibration 2 g, Hz, sinusoidal in all directions to IEC Ambient temperature Operation C ( F) Storage C ( F) Dimensions See dimensional drawing Weight ca. 11 kg (2.25 lb) Supply voltage and power consumption Description of Ex-approval (no ATEX) 2 V DC +25/-15%, 2 V AC ±15%, 10 VA Cable impedance < 10 Ω at 2 V EEx de [ia/ib] II C T6 Flame proof Enclosure d Outputs intrinsically safe class ia Display/keypad intrinsically safe class ib Power and sensor connections are increased safe e Separate version: DEMKO No. 9C.11331X CE-mark EMC Emission EN Immunity EN Low voltage According to EN Enclosure IP00 to IEC and DIN 0050 Material Standard 19 insert (aluminum/steel) to DIN 19 Mechanical vibration 1 g, Hz, sinusoidal in all directions to IEC Ambient temperature Operation C ( F) Storage C( F) Dimensions See dimensional drawing Weight 2,8 kg (6.17 lb) CE-mark EMC CENELEC Emission EN Immunity EN Low voltage According to EN Supply voltage and power consumption 115/230 V AC +10/-15%, Hz, VA 2 V DC +25/-15%, 2 V AC ±15%, 10 VA Cable impedance < 7 Ω at 2 V Factory settings Every transmitter is delivered with a SENSORPROM programmed with default settings according to flowmeter size. The range for each setting is given. Detailed information see Operating Manual. /15 Siemens FI

4 Dimension-dependent settings Volume flow DN Volume flow Q max Volume/Pulse Pulse Unit Totalizer Unit [mm] [inch] Factory setting Min. at 0.5 Max. at 10 Unit at 3 m/s m/s m/s m 3 /h 100 l l x ½ m 3 /h 100 l l x m 3 /h 100 l m m 3 /h 100 l m m 3 /h 100 l m m 3 /h 1 m 3 m m 3 /h 1 m 3 m m 3 /h 1 m 3 m m 3 /h 1 m 3 m m 3 /h 1 m 3 m m 3 /h 1 m 3 m m 3 /h 1 m 3 m m 3 /h 1 m 3 m m 3 /h 10 m 3 m m 3 /h 10 m 3 m m 3 /h 10 m 3 m m 3 /h 10 m 3 m 3 x m 3 /min 10 m 3 m 3 x m 3 /min 100 m 3 m 3 x 100 Dimensional drawings Transmitter IP 67 for wall mounting Siemens FI /155

5 Transmitter as insert for 19 rack Transmitter IP 67 EEx-d /156 Siemens FI

6 Transmitter IP 65, Wall mounting s Siemens FI /157

7 Schematics Electrical diagram compact version IP 67: SONO 3000 IP 67 compact mounted Ω I Ω Ω Ω /158 Siemens FI

8 Electrical diagram remote version IP 67: SONO 3000 IP 67 remote mounted + - Ω Ω Ω Ω Connect coax cable to 81, 83, 85 and 87. Siemens FI /159

9 Electrical diagram remote version 19 rack 19 insert with 3 current outputs, 2 frequency/pulse outputs and 2 relay outputs + - Ω + - Ω + - I I Ω Ω Ω Ω Connect coax cable to 81, 83, 85 and 87. Note Supply voltage 230 V AC 115 to 230 V AC is connected to terminals 1 and 2. The ground wire must be connected to the ground terminal on the terminal plate. If the ground wire is not connected, personnel can be exposed to 115 V / 230 V. /160 Siemens FI

10 Selection and Ordering data SONO 3000 is ordered together with the flowmeter, in the buildup order code. See Handbook SONO flowmeters SONO 3100 /3000, 3300/3000, SONOKIT, SONO 3300/3000 CT and SONOCAL 3000 flow part. Sparepart Signal transmitter SONO 3000, available standard versions Description Version Enclosure Supply Order No. Symbol Signal transmitter SONO 3000 for compact and wall mounting 1 current output 1 frequency/pulse output 1 relay output IP V AC 7ME3150-1AA10-1AA0 50/60 Hz Fibre glass reinforced polyamid 2 V AC/DC 7ME3150-1AA20-1AA0 Signal transmitter SONO 3000 for 19 rack and panel mounting Signal transmitter SONO insert assembled complete with wall mounting enclosure Signal transmitter SONO 3000 Ex-d separate wall mounting, EEx de [ia/ib] IIC T5-T6 1 current output 1 frequency/pulse output 1 relay output 3 current outputs 2 frequency/pulse outputs 2 relay output 1 current output 1 frequency/pulse output 1 relay output 3 current outputs 2 frequency/pulse outputs 2 relay output 1 current output 1 frequency/pulse output 1 relay output IP00 IP00 IP65 ABS plastic IP65 ABS plastic IP65 AISI 316/Duplex 115/230 V AC 50/60 Hz 7ME3150-2CA10-1AA0 115/230 V AC 7ME3150-2CC10-1AA0 50/60 Hz 2 V AC/DC 7ME3150-2CC20-1AA0 115/230 V AC 7ME3150-2EA10-1AA0 50/60 Hz 115/230 V AC 7ME3150-2EC10-1AA0 50/60 Hz 2 V AC/DC 7ME3150-2EC20-1AA0 2 V AC/DC 7ME3150-2FA22-1AA0 Accessories/Spare parts Accessories for signal transmitter SONO 3000 Description Order No. Symbol Wall mounting kit for 7ME3150- FDK: 085F5027 1AA10-1AA0 and 7ME3150-1AA20-1AA0, Using x coaxial sensor cables, Wall brackets, Pg 13.5 screwed with cable entries. SENSORPROM memory unit for all transmitters: Description Order No. Symbol SENSORPROM memory unit FDK: 085B5329 for SONOFLO When ordering: Inform on sensor Order No. and Serial No. Front of panel mounting kit for 19 insert (28TE), IP20 enclosure in ABS plastic for front and panel mounting FDK: 083F3087 Back of panel mounting kit for 19 insert (28TE), IP00 enclosure in aluminum FDK: 083F308 Siemens FI /161

11 Spareparts for SONO 3000 transmitter Type/description Order No. Symbol SONO 3000 EEx-d insert FDK: 085F5210 SONO back print for IP65 wall mounting 230 V version FDK: 085F5327 SONO 3000 assembled plate for coax connections FDK: 085L1023 SONO 3000 assembled base plate FDK: 085L1015 SONO 3000 EEx-d, front glas incl. frame FDK: 085U2109 SONO 3000 EEx-d, gaskets for transmitter housing FDK: 085U2002 /162 Siemens FI