General-purpose Foil Strain Gages (KFGS)
|
|
- Wendy Walters
- 5 years ago
- Views:
Transcription
1 General-purpose Foil Strain Gages (KFGS) -8 General-purpose Foil Strain Gages KFGS Grid width Grid length (Gage length) length The KFGS series gages use polyimide resin for the base that is approx. μm thick. It ensures excellent flexibility. The outstanding moisture proof enables the KFGS gages to operate effectively both indoors and outdoors. Unless directly exposed to water droplets, no coating treatment is required. Applicable Adhesives Operating Temperature CC-A 96 to 0C CC- 0 to 0C CC-6 0 to 00C EP-40 to 0C PC to 0C * For vinyl-coated cables, the operating temperature is -0 to 80ºC. width Gage leads Notes on pre-attached lead-wire cables Standard color of the -wire cable pre-attached to uniaxial gages is red (R). If desired, allows a white, green, yellow or black cable to be pre-attached. Standard stripe of the -wire cable pre-attached to uniaxial gages is a red stripe. If desired, allows a blue or yellow stripe to be pre-attached. In the case of a biaxial gage and triaxial gage, -wire cables are color-coded with red, white and green stripes for 0, and, respectively and -wire cables, with red, yellow and blue stripes for 0, and, respectively. The letter code is S in common. Types, lengths and codes of lead-wire cables pre-attached to KFGS series gages Type Length cm 0 cm m m m Operating temp. polyester-coated copper wires C,C,C,C, C6,D,D,D, D4,D6,D9,D6, D7,D9,D8, D,D9 polyester-coated copper wires C,C,C, C,C6, D,D4,D9, D6,D7,D9, D8,D9 NC N0C NM C,C,C, C,C6, D9,D9 Vinyl-coated flat -wire cables D,D4, D6,D7, D8, D9 C,C,C, C,C6, D,D9,D9, D Vinyl-coated flat -wire cables D,D4, D6,D7, D8, D9 Mid-temperature -wire cables C,C,C, C,C6, D,D4,D9, D6,D7,D9, D8,D9 RC R0C RM RM RM NC LCR LCS LCR LCS N0C L0CR L0CS L0CR L0CS NM LMR LMS LMR LMS LMR LMS LMR LMS LMR LMS LMR LMS 96 to 0C -0 to 80C -00 to 0C Twisted for 0 cm (There are exceptions.) L-6 L-9 for 6 m L-7 L-0 for 6 m Mid-temperature -wire cables C,C,C, C,C6, D,D,D4,D9, D6,D7,D9, D8,D,D9 RC R0C RM RM RM L- L- * For other lead-wire cable lengths, contact us. When ordering, specify the model of the strain gage and the code of the lead-wire cable with a space in between. E.g. KFGS--0-C- With polyester-coated copper wires cm long KFGS--0-C- NC KFGS--0-C- With a vinyl-coated flat -wire cable m long KFGS--0-C- LMR KFGS--0-D7- With a vinyl-coated flat -wire cable m long KFGS--0-D7- LMS KFGS--0-C- With a mid-temperature -wire cable m long KFGS--0-C- RM KFGS--0-D7- With a mid-temperature -wire cable m long KFGS--0-D7- RM If no lead-wire cable code is suffixed, the gage is delivered with gage leads only. (Silver-covered copper wires mm long) For the types of lead-wire cables, see pages - and
2 -9 General-purpose Foil Strain Gages (KFGS) -9 Uniaxial Silver-covered copper gage leads mm long Resistance: 0 Ω Gage factor: Approx.. KFGS-0-0-C *The above picture is KFGS-0-0-C-. KFGS-0-0-C *The above picture is KFGS-0-0-C-6. KFGS-0-0-C *The above picture is KFGS-0-0-C-. KFGS-6-0-C *The above picture is KFGS-6-0-C-7. KFGS--0-C *The above picture is KFGS--0-C-. KFGS-4N-0-C *The above picture is KFGS-4N-0-C-6. KFGS--0-C *The above picture is KFGS--0-C-. KFGS--0-C *The above picture is KFGS--0-C-7. KFGS-N-0-C *The above picture is KFGS-N-0-C-. KFGS--0-C *The above picture is KFGS--0-C-6. KFGS-N-0-C *The above picture is KFGS-N-0-C-. KFGS-0-0-C *The above picture is KFGS-0-0-C-7. KFGS-0-0-C *The above picture is KFGS-0-0-C-. KFGS-0-0-C- KFGS-0-0-C-6 KFGS-0-0-C- KFGS-0-0-C-7 KFGS-0-0-C- KFGS-0-0-C-6 KFGS-0-0-C- KFGS-0-0-C-7 KFGS-0-0-C- KFGS-0-0-C-6 KFGS-0-0-C- KFGS-0-0-C-7 KFGS-6-0-C- KFGS-6-0-C-6 KFGS-6-0-C- KFGS-6-0-C-7 KFGS--0-C- KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS-4N-0-C- KFGS-4N-0-C-6 KFGS-4N-0-C- KFGS-4N-0-C-7 KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS--0-C- KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS-N-0-C- KFGS-N-0-C-6 KFGS-N-0-C- KFGS-N-0-C-7 KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS-N-0-C- KFGS-N-0-C-6 KFGS-N-0-C- KFGS-N-0-C-7 KFGS-0-0-C- KFGS-0-0-C-6 KFGS-0-0-C- KFGS-0-0-C-7 KFGS-0-0-C- KFGS-0-0-C-6 KFGS-0-0-C- KFGS-0-0-C Common steel Stainless steel Aluminum alloy Magnesium alloy ( color stands for different linear expansion.) For wood For wood 0 gages/pkg
3 General-purpose Foil Strain Gages (KFGS) -0 Biaxial, 0 / stacked rosette Resistance: 0 Ω Gage factor: Approx.. *The above picture is KFGS-0-0-D6-. Triaxial, 0 // stacked rosette (For stress analysis) Resistance: 0 Ω Gage factor: Approx.. *The above picture is KFGS-0-0-D7-. KFGS-0-0-D6- KFGS-0-0-D6-6 KFGS-0-0-D6- KFGS-0-0-D6-7 KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 KFGS-0-0-D7- KFGS-0-0-D7-6 KFGS-0-0-D7- KFGS-0-0-D7-7 KFGS--0-D7- KFGS--0-D7-6 KFGS--0-D7- KFGS--0-D7-7 KFGS--0-D7- KFGS--0-D7-6 KFGS--0-D7- KFGS--0-D7-7 KFGS--0-D7- KFGS--0-D7-6 KFGS--0-D7- KFGS--0-D7-7 KFGS--0-D7- KFGS--0-D7-6 KFGS--0-D7- KFGS--0-D7-7 Biaxial, 0 / plane arrangement Resistance: 0 Ω Gage factor: Approx *The above picture is KFGS--0-D-. KFGS--0-D- KFGS--0-D-6 KFGS--0-D- KFGS--0-D-7 Biaxial, 0 / plane arrangement (For torque measurement) Resistance: 0 Ω Gage factor: Approx *The above picture is KFGS--0-D-. KFGS--0-D- KFGS--0-D-6 KFGS--0-D- KFGS--0-D gages/pkg -0
4 - General-purpose Foil Strain Gages (KFGS) Biaxial, 0 / plane arrangement (For torque measurement) Resistance: 0 Ω Gage factor: Approx.. *The above picture is KFGS--0-D-. Triaxial, 0 // plane arrangement Resistance: 0 Ω Gage factor: Approx.. KFGS--0-D- KFGS--0-D-6 KFGS--0-D- KFGS--0-D *The above picture is KFGS--0-D-6. KFGS--0-D- KFGS--0-D-6 KFGS--0-D- KFGS--0-D-7 Triaxial, 0 /0 /40 plane arrangement Resistance: 0 Ω Gage factor: Approx *The above picture is KFGS--0-D4-6. KFGS--0-D4- KFGS--0-D4-6 KFGS--0-D4- KFGS--0-D4-7 KFGS--0-D4- KFGS--0-D4-6 KFGS--0-D4- KFGS--0-D4-7 Quadraxial, 0 /0 //0 plane arrangement Resistance: 0 Ω Gage factor: Approx *The above picture is KFGS--0-D6-. KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 Uniaxial, with lead wires from both ends Resistance: 0 Ω Gage factor: Approx *The above picture is KFGS--0-C-7. *The above picture is KFGS--0-C-7. KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C gages/pkg
5 General-purpose Foil Strain Gages (KFGS) - *The above picture is KFGS--0-C-. *The above picture is KFGS--0-C6-. Uniaxial (For shearing strain measurement) Resistance: 0 Ω Gage factor: Approx.. Torque measurement is possible by using C and C6 in combination. KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS--0-C6- KFGS--0-C6-6 KFGS--0-C6- KFGS--0-C6-7 Uniaxial -element (For concentrated stress measurement) Resistance: 0 Ω Gage factor: Approx.. Pre-attached type: polyester-coated copper wires (0 cm) + the specified lead-wire cable P = mm for gage length mm (Pitch) P = mm for gage length mm *The above picture is KFGS--0-D9-6 N0C. P = mm for gage length mm (Pitch) P = mm for gage length mm *The above picture is KFGS--0-D9-6 N0C. KFGS--0-D9- KFGS--0-D9-6 KFGS--0-D9- KFGS--0-D9-7 KFGS--0-D9- KFGS--0-D9-6 KFGS--0-D9- KFGS--0-D9-7 KFGS--0-D9- KFGS--0-D9-6 KFGS--0-D9- KFGS--0-D9-7 KFGS--0-D9- KFGS--0-D9-6 KFGS--0-D9- KFGS--0-D9-7 Biaxial -element, stacked rosette (For concentrated stress measurement) Resistance: 0 Ω Gage factor: Approx.. Pre-attached type: polyester-coated copper wires (0 cm) + the specified lead-wire cable gages/pkg gages/pkg gages/pkg gages/pkg (Pitch) P mm *The above picture is KFGS--0-D9- N0C. Uniaxial 60Ω gages Resistance: 60 Ω Gage factor: Approx.. Upper-side gage pattern KFGS--0-D9- KFGS--0-D9-6 KFGS--0-D9- KFGS--0-D9-7 Lower-side gage pattern.4 (.) 6.4 Figures in ( ) are for lower-side gage patterns. gages/pkg Use gages in parallel connection. (Bending compensation is possible.) *The above picture is KFGS--60-C-7. *The above picture is KFGS--60-C-7. KFGS--60-C- KFGS--60-C-6 KFGS--60-C- KFGS--60-C-7 KFGS--60-C- KFGS--60-C-6 KFGS--60-C- KFGS--60-C gages/ pkg unless otherwise specified. -
6 - General-purpose Foil Strain Gages (KFGS) Uniaxial 0Ω gages Resistance: 0 Ω Gage factor: Approx.. *The above picture is KFGS--0-C-. *The above picture is KFGS--0-C-. *The above picture is KFGS--0-C-. *The above picture is KFGS--0-C-. KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 KFGS--0-C- KFGS--0-C-6 KFGS--0-C- KFGS--0-C-7 Biaxial 0Ω gages, 0 / stacked rosette Resistance: 0 Ω Gage factor: Approx *The above picture is KFGS--0-D6-6. KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 KFGS--0-D6- KFGS--0-D6-6 KFGS--0-D6- KFGS--0-D6-7 Triaxial 0Ω gages, 0 // stacked rosette Resistance: 0 Ω Gage factor: Approx *The above picture is KFGS--0-D7-7. KFGS--0-D7- KFGS--0-D7-6 KFGS--0-D7- KFGS--0-D7-7 KFGS--0-D7- KFGS--0-D7-6 KFGS--0-D7- KFGS--0-D7-7 KFGS--0-D7- KFGS--0-D7-6 KFGS--0-D7- KFGS--0-D7-7 KFGS--0-D7- KFGS--0-D7-6 KFGS--0-D7- KFGS--0-D gages/pkg
7 General-purpose Foil Strain Gages (KFGS) -4 Biaxial 0Ω gages, 0 / plane arrangement Resistance: 0 Ω Gage factor: Approx.. *The above picture is KFGS--0-D-6. KFGS--0-D- KFGS--0-D-6 KFGS--0-D- KFGS--0-D-7 Biaxial 0Ω gages 0 / plane arrangement (For torque measurement) Resistance: 0 Ω Gage factor: Approx *The above picture is KFGS--0-D-. *The above picture is KFGS--0-D-. KFGS--0-D- KFGS--0-D-6 KFGS--0-D- KFGS--0-D-7 KFGS--0-D- KFGS--0-D-6 KFGS--0-D- KFGS--0-D-7 Uniaxial 00Ω gages (For making transducers) Resistance: 00 Ω Gage factor: Approx *The above picture is KFGS--00-C-7. *The above picture is KFGS--00-C-7. KFGS--00-C- KFGS--00-C-6 KFGS--00-C- KFGS--00-C-7 KFGS--00-C- KFGS--00-C-6 KFGS--00-C- KFGS--00-C-7 Uniaxial 000Ω gages (For making transducers) Resistance: 000 Ω Gage factor: Approx *The above picture is KFGS--K-C-7. *The above picture is KFGS--K-C-7. KFGS--K-C- KFGS--K-C-6 KFGS--K-C- KFGS--K-C-7 KFGS--K-C- KFGS--K-C-6 KFGS--K-C- KFGS--K-C gages/pkg -4
8 - General-purpose Foil Strain Gages (KFGS) KFGS Series Foil Strain Gages with Gage Terminal Uniaxial Resistance: 0 Ω Gage factor: Approx.. T-C6 (When the clip-equipped dedicated cable is used, the operating temperature range of each adhesive after curing is 0 to 80 C.) *The above picture is KFGS--0-C- T-F7. Biaxial, 0 / stacked rosette Resistance: 0 Ω Gage factor: Approx.. Applicable Adhesives Operating Temp. CC-6 CC-A KFGS--0-C- T-F7 KFGS--0-C-6 T-F7 KFGS--0-C- T-F7 KFGS--0-C- T-F7 KFGS--0-C-6 T-F7 KFGS--0-C- T-F7 0 to 00C 96 to 0C KFGS gages equipped with a gage terminal enable one-touchconnection/disconnection of the lead-wire cable. They are suitable for residual stress measurement with the cutting method. A clip-equipped dedicated cable T-C6 (Vinyl-coated, m long) is optionally available. CC- EP Operating Temp. 0 to 0C to 0C mm long 0.4 mm long *The above picture is KFGS--0-D6-6 T-F7. KFGS--0-D6- T-F7 KFGS--0-D6-6 T-F7 KFGS--0-D6- T-F7 KFGS--0-D6- T-F7 KFGS--0-D6-6 T-F7 KFGS--0-D6- T-F7 Triaxial, 0 // stacked rosette Resistance: 0 Ω Gage factor: Approx mm long 0.4 mm long *The above picture is KFGS--0-D7- T-F7. KFGS Series Foil Strain Gages for Boring Method Triaxial, 0 / / plane arrangement Resistance: 0 Ω Gage factor: Approx.. KFGS--0-D7- T-F7 KFGS--0-D7-6 T-F7 KFGS--0-D7- T-F7 KFGS--0-D7- T-F7 KFGS--0-D7-6 T-F7 KFGS--0-D7- T-F7 Designed to measure residual stress released by the boring method. Applicable Adhesives Operating Temp. CC-A CC- CC-6 96 to 0C 0 to 0C 0 to 00C.. EP-40 PC mm long 0.4 mm long Operating Temp. to 0C 96 to 0C - For KFGS gages with the lead-wire cable pre-attached, see page -8. *The above picture is KFGS--0-D8-7. KFGS--0-D8- KFGS--0-D8-6 KFGS--0-D8- KFGS--0-D8-7 KFGS-.-0-D8- KFGS-.-0-D8-6 KFGS-.-0-D8- KFGS-.-0-D Diameter of gage center 0.8 Diameter of gage center. 0 gages/ pkg unless otherwise specified.
General-purpose Foil Strain Gages KFG
General-purpose Foil Strain Gages KFG -8 General-purpose Foil Strain Gages in KFG Series Grid width Grid length (Gage length) Base length The KFG series gages use polyimide resin for the base approx. μm
More informationGeneral-purpose Foil Strain Gages KFGS Series
General-purpose Foil Strain Gages KFGS Series KFGS New strain gages with the world highest level performance Point CE compliant All models are RoHS compliant Point Improved Quality Excellent long-term
More informationKyowa Measuring Instruments Digest Edition 2017 to 2018
Kyowa Measuring Instruments Digest Edition 2017 to 2018 Strain Gages Load Cells Pressure Transducers Acceleration Transducers Torque Transducers Displacement Transducers Dynamic Strain Amplifiers Data
More informationAC AC AC
AC104.01-10 AC104.01-100 AC104.01-500 Description The hermetic sealed industrial piezoelectric accelerometer model 104 is design to monitor the vibration in harsh industrial environment. It uses the industry
More informationTechnical data. Contact material: with double break or 2 NC contacts Switching system: A IEC snap action with positive break NC contacts
Emergency pull-wire switches ZS 71... NA Technical data Contact variations * 63 mm for version 200 N pre-tensioning force To EN 418/IEC 60947-5-5 Metal enclosure 2 contacts Integrated emergency-stop button
More informationSafety Angle Transducer Type Series Potentiometric, active
Special features Potentiometric measuring principle with conductive plastic resistance track and integrated signal amplifier Redundant design for safety relevant applications available Extremely rugged
More informationInstallation Guide. English. FS62 Weldable Strain Sensor
Installation Guide English FS62 Weldable Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com HBM FiberSensing,
More informationSPECIFICATION FOR APPROVAL 1/8W 0816 LOW RESISTNACE CHIP RESISTOR
PAGE : 1 OF 11 1/8W 0816 LOW RESISTNACE CHIP RESISTOR 1. Scope This specification applies to 0.8mm x 1.60mm size 1/8W, fixed metal film chip resistors rectangular type for use in electronic equipment.
More informationTorque Sensor Accessories and Services
------------------- Torque Sensor Accessories and Services Highlights Strain gage signal conditioners Cable assemblies Speed sensors Shunt calibration modules and thermocouples Calibration services PCB
More informationRectangular Type APS-S/M Series
APS-CU APS- 5 APS-F/U APS-S/M APS-CK APS-0/ APS-GK APS-GM APS-GMD APS-GMC Small design offered in two types: front face sensing and upper sensing. Different-frequency type that allows close-contact installation.
More informationOvertravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0
Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.
More informationCASSIOPEA A ++ A + A. EU Regulation 874/ Illumination equipment energy classes. Cassiopea. .0 Inox
67 CASSIOPEA Square or round luminaire for installation in-ground where recessing depth are limited (up to 10mm) recessed. Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content).
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More informationTL-W. Standard Flat Inductive Proximity Sensors. Ordering Information. Front and side facing surface IP67 DC 2-wire and DC 3-wire models
Standard Flat Inductive Proximity Sensors Front and side facing surface IP67 DC -wire and DC -wire models Ordering Information DC -wire Models Shape distance Model Output and operating status mm MD1 *1
More informationK3D60a ±100N. Description. The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes.
K3D60a ±100N Description The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes. The new 3-axis sensor K3D60a is a further development of the series K3D60 and
More informationInstallation Guide. English. FS62 Miniature Polyimide Strain Sensor
Installation Guide English FS62 Miniature Polyimide Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com
More informationBend Sensor Technology Mechanical Application Design Guide Mechanical Application Design Guide
Bend Sensor Technology Mechanical Application Design Guide Mechanical Application Design Guide www.flexpoint.com Copyright 2015 Flexpoint Sensor Systems Page 1 of 10 2 Bend Sensor Technology Mechanical
More informationFPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs
AYF31 FPC CONNECTORS FOR FPC CONNECTION FPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs (Former Name: YF31) FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes
More informationBend Sensor Technology Mechanical Application Design Guide
Bend Sensor Technology Mechanical Application Design Guide Copyright 2015 Flexpoint Sensor Systems Page 1 of 10 www.flexpoint.com Contents Bend Sensor Description. 3 How the Bend Sensor Potentiometer Works.
More informationUV TECHNOLOGY. Relatively new, but rapidly emerging technology. AZON Q UV PRODUCT CATALOG
UV TECHNOLOGY Relatively new, but rapidly emerging technology. UV curing has been widely adopted in many industries including automotive, telecommunications, electronics, graphic arts, converting and metal,
More informationEach Height Master is supplied with a gauge block for reference-height setting. Fitted wooden case supplied. SPECIFICATIONS
Height Master SRIS 515 Models with the the staggered arrangement of blocks have two measuring faces on the same level, one facing up and the other down (except for 515-310). Staggered 20mm blocks (movable)
More informationPaper Sticker Sheets - Multiple stickers per 8.5 x 11 sheet (indoor use)
604-872-3231 1-888-872-3231 www.printedpromoproducts.ca 25 Paper Sticker Sheets - Multiple stickers per 8.5 x 11 sheet (indoor use) Printed on uncoated white stock with permanent adhesive. Production time
More informationDevelopment of a Deformable Mirror for High-Power Lasers
Development of a Deformable Mirror for High-Power Lasers Dr. Justin Mansell and Robert Praus MZA Associates Corporation Mirror Technology Days August 1, 2007 1 Outline Introduction & Project Goal Deformable
More informationSpecification. Hercules MA520.A.BC.008
MA520.A.BC.008 on ground-plane Hercules MA520.A.BC.008 Specification Part No. Product Name MA520.A.BC.008 Hercules 2in1 Cellular and Wi-Fi Heavy Duty Screw Mount Antenna - Cellular 2G/3G HSPA/GSM/GPRS/CDMA/EVDO/UMTS/WCDMA
More informationBondable Resistance Temperature Sensors and Associated Circuitry
Micro-Measurements Strain Gages and Instruments Bondable Resistance Temperature Sensors and Associated Circuitry TN-506-3 1.0 Introduction Micro-Measurements manufactures a line of resis- tance temperature
More informationSINGLE TURN COPAL ELECTRONICS S T T A Ω ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES Lead-free soldering, Cadmium-free Top and side adjustment styles Rotor with a cross slot for ease of adjustment Leaded terminals provide strong as adhesive
More informationpavonis Thermal transfer printer Desktop thermal transfer label printer
pavonis Thermal transfer printer Desktop thermal transfer label printer Thermal transfer printer with a huge range of labels Art. No. 86 66 17 20 pavonis Thermal transfer printer The new pavonis thermal
More informationXPC10 High temperature miniature pressure sensor
Absolute, sealed and gauge ranges 10 to 500 bar [150 to 7 500 psi] High temp. operation from -40 up to 220 ºC [-40 to 428 F] Stainless steel construction Amplified output available For static and dynamic
More information1. Enumerate the most commonly used engineering materials and state some important properties and their engineering applications.
Code No: R05310305 Set No. 1 III B.Tech I Semester Regular Examinations, November 2008 DESIGN OF MACHINE MEMBERS-I ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks:
More informationOptical Ground Wires (OPGW)
Optical Ground Wires (OPGW) Presented by NSW (Norddeutsche Seekabelwerke GmbH) 4-Nov-13 / 1 NSW The Company Plant Overview 4-Nov-13 / 2 NSW Ground Wire History Our Experience Ground Wire Cables production
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationODiSI Fiber Optic Sensor Installation Guide
Application Note May 30, 2017 ODiSI Fiber Optic Sensor Installation Guide Contents 1. Introduction... 1 2. Contents of Fiber Optic Sensor Installation Kit... 2 3. Mounting the Strain Sensor... 2 3.1. Planning
More informationGuideline. Casting Selection Process. Table of Contents. Delivery Engineered Solutions
Casting Selection Process Guideline Table of Contents Introduction... 2 Factors In Choosing A Process... 2 Category Details & Requirements... 4 Sand casting... 4 Gravity die casting (also known as permanent
More informationSLEEVING (CONVOLUTED) SLEEVING (SPLIT CONVOLUTED) SLEEVING (PVC) 56 AUTO MARINE PRODUCT CATALOGUE 2018/19 VISIT:
SLEEVING (CONVOLUTED) Halogen-free nylon convoluted sleeving suitable for bundling of wires and protection against abrasion. Continuous operating temperature -40ºC to 5ºC with short excursions up to 150ºC.
More informationFLEXIBLE POWER & GROUNDING. Braid Solutions
FLEXIBLE POWER & GROUNDING Braid Solutions Flexible Grounding and Power Options One of our signature products, BURNDY Braid Assemblies are an economical and efficient means of protecting electrical equipment
More informationSRS SEALED ROTARY SENSORS
SRS SEALED ROTARY SENSORS Innovation In Motion INNOVATION IN MOTION Penny+Giles SRS280 sealed rotary sensors and SRS880 submersible rotary sensors have been specially developed to provide maximum performance
More informationDissolved Oxygen Transmitter
Dissolved Oxygen Transmitter OBM-67H The OBM-67H is a -wire type (4VDC power supply) dissolved oxygen transmitter housed in a robust, die-cast aluminum enclosure suitable for installation out in the field.
More informationCHAPTER 6 FABRICATION OF PROTOTYPE: PERFORMANCE RESULTS AND DISCUSSIONS
80 CHAPTER 6 FABRICATION OF PROTOTYPE: PERFORMANCE RESULTS AND DISCUSSIONS 6.1 INTRODUCTION The proposed permanent magnet brushless dc motor has quadruplex winding redundancy armature stator assembly,
More informationExperimental Evaluation of Metal Composite Multi Bolt Radial Joint on Laminate Level, under uni Axial Tensile Loading
RESEARCH ARTICLE OPEN ACCESS Experimental Evaluation of Metal Composite Multi Bolt Radial Joint on Laminate Level, under uni Axial Tensile Loading C Sharada Prabhakar *, P Rameshbabu** *Scientist, Advanced
More informationPOLYIMIDE INSULATED WIRES AND CABLES, LOW FREQUENCY, 600V, -200 TO +200 C BASED ON TYPE SPL. ESCC Detail Specification No.
Page 1 of 23 POLYIMIDE INSULATED WIRES AND CABLES, LOW FREQUENCY, 600V, -200 TO +200 C BASED ON TYPE SPL ESCC Detail Specification Issue 3 May 2013 Document Custodian: European Space Agency see https://escies.org
More informationPsi casing ENd seals type Kt type du type KG/Ko type HA type stm
PSI Casing end seals type kt type du type kg/ko type ha type stm www.psi-products.com 101 PSI Casing End Seals Pipes carrying media (e.g. gas pipes, water pipes, sewage pipes, etc.) below motorways, main
More informationSHIELDED WINDOWS. General Description. Orientation. Shielding Test Data. Tolerances. 32 BOMBERG & CO. ApS Tlf Fax
Attenuation (db) SHIELDED WINDOWS General Description Shielded windows consist of one or more window layers with a conductive intermediate layer. Applicable for all visual display systems, e.g. in meters
More informationWDM-135A (2-wire type) WDM-136A (4-wire type) CONDUCTIVITY TRANSMITTER. Functions Features. Structure diagram. 10/ cm (note 3) 2-wire system
CONDUCTIVITY TRANSMITTR WDM-A (-wire type) WDM-6A (-wire type) It is a type of small firm aluminum -electrode site-installation CONDUCTIVITY TRANSMITTR (signal transmitter) and easy operate. The device
More informationFlexible glass substrates for roll-to-roll manufacturing
Science & Technology Flexible glass substrates for roll-to-roll manufacturing Corning - S. Garner, G. Merz, J. Tosch, C. Chang, D. Marshall, X. Li, J. Matusick, J. Lin, C. Kuo, S. Lewis, C. Kang ITRI -
More informationOmnidirectional Antenna Vertical Polarization Indoor and outdoor use
db Omnidirectional Antenna and outdoor use 17 27 Omni 17 27 6 2dBi 8 41 N female Connector position Bottom or top 17 27 MHz SWR < 1.8 2 dbi Intermodulation IM < 15 dbc (2 x 4 dbm carrier) ertical 5 W (at
More informationAPS-F/U Series. PBT Resin Square Type, 2-wire/3-wire DC System. Type. Proximity Sensor. Features
Sensor Series Features PBT Resin, -wire/-wire DC System - Wide variety from thin 7mm model - Maximum detection distance: 0 mm - Front Surface / Upper Surface detection - s of different frequency are available
More informationSPECIFICATION. Optical Fiber Cable
SPECIFICATION Optical Fiber Cable (GYDXTW 24~432) Prepared by Zhang xin Approved by Yao qiang 1 General 11 This specification covers the requirements for the supply of single-mode optical fiber cables
More informationS-BT screw-in stainless steel and carbon steel threaded studs
S-BT screw-in stainless steel and carbon steel threaded studs Product data Dimensions S-BT-MR M10/15 SN 6 S-BT-MR M10/15 SN 6 AL**) S-BT-MR W10/15 SN 6 S-BT-MR W10/15 SN 6 AL**) S-BT-MR M10/15 SN 5 ***)
More informationFPC connectors (0.3mm pitch) Front lock with FPC tabs
AYF31 For FPC FPC connectors (0.3mm pitch) Front lock with FPC tabs Y3FT Series FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes to the miniaturization
More informationThin Film Deposition
Thin Film Deposition Section Eleven 11 11.1 General Information 2 11.2 Deposition Monitors 3 11.3 Crystal Feedthroughs 4 11.4 Crystal s 5 11.5 Cables, s, Crystals & Accessories 6 Nor-Cal Products, Inc.
More informationSPB-TT and SPB-TS Linear Encoder For Pressbrake applications
Specification Encoder Assembly SPB-TS and SPB-TT Accuracy +/- 10µm Resolution 1µm or 5µm Output Type RS422 Differential Quadrature Max. Traverse Speed 60m/min (198ft/min) Max. Acceleration 100m/s2 (10g)
More informationGROUNDING EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA
PAGE 86 5000 500 5040 5060 5080 500 50 540 560 580 500 540 560 580 5300 5340 5360 5380 5400 5440 5460 5480 5500 5540 5560 700 705 75 70 75 730 740 745 750 755 765 770 775 780 790 7300 7305 730 C 00 C 0
More informationBarrier posts of steel tube Ø 76 mm, Ø 89 mm, 70 x 70 mm
of steel tube Ø 76 mm, Ø 89 mm, 70 x 70 mm Steel tube Ø 76, Ø 89, 70 x 70 mm with welded steel cap approx. 900 mm above ground, total length 1400 mm hot-dip galvanized and yellow coated with black stripes
More informationCLAIMS 1. A suspension board with circuit, characterized in that, it comprises a metal support layer, an insulating layer formed on the metal support
[19] State Intellectual Property Office of the P.R.C [51] Int. Cl 7 G11B 5/48 H05K 1/11 [12] Patent Application Publication G11B 21/16 [21] Application No.: 00133926.5 [43] Publication Date: 5.30.2001
More informationSPECIAL PRODUCTS FOR EVERY CHALLENGE, A SOLUTION.
SPECIAL PRODUCTS FOR EVERY CHALLENGE, A SOLUTION. 01 TERRACE COMFORT PLANK A minimised deformation due to bonding Edge-grain minimises any warping, with hardly any fibre separation Homogeneous appearance
More informationSPECIFICATION No SS-135/ kv METAL OXIDE SURGE ARRESTERS WITHOUT GAPS
-1- INDEPENDENT POWER TRANSMISSION OPERATOR S.A. TNPRD/ SUBSTATION SPECIFICATION & EQUIPMENT SECTION June 2013 SPECIFICATION No 150 kv METAL OXIDE SURGE ARRESTERS WITHOUT GAPS I. SCOPE This specification
More informationAdvanced High-Density Interconnection Technology
Advanced High-Density Interconnection Technology Osamu Nakao 1 This report introduces Fujikura s all-polyimide IVH (interstitial Via Hole)-multi-layer circuit boards and device-embedding technology. Employing
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
More information19. SHIELDED WINDOWS.
19. SHIELDED WINDOWS. GENERAL INFORMATION Shielded windows consist of one or more window layers with a conductive intermediate layer. They are applicable for all visual display systems, e.g. in meters
More informationGolden Century Technology Co., Ltd
Golden Century Technology Co., Ltd Address:No18,Qinghe Anningzhuang Dong Road, Haidian district, Beijing, China 100085 T/F: +86(0)10 88507752 E: info@gd-flex.com W:www.gd-flex.com Products Category Flexible
More informationProduct Information Report Hardflex Band Saw Blades
Overview Hardflex Bandsaw Blades are great all-purpose blades for cutting almost any metal. Cuts tough material like stainless steel. Works equally well on solids, tubing and structural shapes. Features/Benefits
More informationDax DX-S10121 (12F Sin ngle Mode Armoured Fiber Cable -Uni-Tube Design) Introduction:
Dax DX-S10121 (12F Single Mode Armoured Fiber Cable -Uni-Tube Design) Introduction: Dax DX-S1012burial installations, providing outstanding mechanical protection and rodent resistance. is a12 core Single
More informationSUPERSEDED. NOT the LATEST REVISION
Figure 1 OPTIMATE 2.5mm bayonet ceramic connector kits listed in Figure 1 are designed to be applied to fiber optic cable. Coupling Receptacle Kit 501381 1 is used to mate two bayonet connectors in free
More informationCable transducer Analog output / redundant Measuring length absolute up to 5 m
Features Magnetic sensing method Resolution: 12 bit Interface analog 0...10 V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing
More informationInkjet Filling of TSVs with Silver Nanoparticle Ink. Behnam Khorramdel, Matti Mäntysalo Tampere University of Technology ESTC 2014 Finland, Helsinki
Inkjet Filling of TSVs with Silver Nanoparticle Ink Behnam Khorramdel, Matti Mäntysalo Tampere University of Technology ESTC 2014 Finland, Helsinki Outline Motivation for this study Inkjet in MEMS fabrication
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationTuf-Lite II Fans 3000HC Series Hub
Tuf-Lite II Fans 3000HC Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 8 through 10 Diameter Hudson Tuf-Lite II (White) are made from fiberglass reinforced vinyl-ester
More informationAll-Printable Real-time Airframe Monitoring System (ARAMS)
All-Printable Real-time Airframe Monitoring System (ARAMS) S. Joshi 1, S. Bland 1, R. DeMott 1, N. Anderson 2, G. Jursich 2, Y. Zhang 3, D. Gamota 4 1 NextGen Aeronautics, Inc., 2 University of Illinois
More informationHandling and Electrical Contacting of Piezoceramic Components
Technical Note Handling and Electrical Contacting of Piezoceramic Components Contents About this Document... 2 Symbols and Typographic Conventions... 2 Safety Instructions... 2 Personnel Qualification...
More informationInstallation Guide. English. FS62 Composite Strain Sensor
Installation Guide English FS62 Composite Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com HBM FiberSensing,
More information3M Clear Track Hallway Fiber Pathway
Communication Markets Division 3M Clear Track Hallway Fiber Pathway The 3M Clear Track Hallway Fiber Pathway provides an aesthetic pathway for use in brownfield Multi Dwelling Units (MDU) and multitenant
More informationMetal Film Resistor Kit
Ratings: Rated Power 0.5W at 70 C Max. Working Voltage 350V Max. Overload Voltage 700V Dielectric Withstanding Voltage 700V Rated Ambient Temp. 70 C Operating Temp. Range -55 C to +155 C Resistance Tolerance
More informationMetal Film Resistor Kit
Ratings: Rated Power 0.25W at 70 C Max. Working Voltage 250V Max. Overload Voltage 500V Dielectric Withstanding Voltage 500V Rated Ambient Temp. 70 C Operating Temp. Range -55 C to +155 C Resistance Tolerance
More informationSection 914. JOINT AND WATERPROOFING MATERIALS
914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.
More informationHOTBAR REFLOW SOLDERING
HOTBAR REFLOW SOLDERING Content 1. Hotbar Reflow Soldering Introduction 2. Application Types 3. Process Descriptions > Flex to PCB > Wire to PCB 4. Design Guidelines 5. Equipment 6. Troubleshooting Guide
More informationTurnkey Dielectric Spectroscopy
Turnkey Dielectric Spectroscopy Measure dielectric constant & tan as a function of Temperature & Frequency Capability This low-cost turnkey test system can be used to measure capacitance (dielectric constant)
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationT Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic. Introduction. Contents. 1 Scope and field of application
T-26728 Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic Test, material and performance specifications Introduction This standard conforms where applicable to DIN 267 part 28, DIN 267 part
More informationDESIGN OF MACHINE MEMBERS-I
Code No: R31035 R10 Set No: 1 JNT University Kakinada III B.Tech. I Semester Regular/Supplementary Examinations, Dec - 2014/Jan -2015 DESIGN OF MACHINE MEMBERS-I (Mechanical Engineering) Time: 3 Hours
More informationIncremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
More informationForce and strain sensors.
Force and strain sensors. Measure. Test. Control. Edition 2016 Force and strain sensors by Baumer combine tried and tested technology and sophisticated innovations. 1 Contents. Introduction 1 Product key
More informationConcrete Finishing. Flat Back Finishing Trowel. Round End Finishing Trowels. To order Concrete Finishing
Concrete Finishing Concrete Finishing To order Square End Finishing Trowels 620004 12 x 3 Square End Finishing Trowel 620006 12 x 4 Square End Finighing Trowel 620010 14 x 4 Square End Finishing Trowel
More informationSECTION 10. SAFETY METHODS FOR TURNBUCKLES
SECTION 10. SAFETY METHODS FOR TURNBUCKLES 7-179. GENERAL. Safety all turnbuckles with safety wire using either the double or single-wrap method, or with any appropriately approved special safetying device
More informationZ Order-No ½ ½ x
www.wiha.com Safety note: When working with cutting pliers beware of wire ends flying away. Please wear safety glasses. Combination pliers and high-leverage combination pliers. Needle nose pliers with
More informationA thin foil optical strain gage based on silicon-on-insulator microresonators
A thin foil optical strain gage based on silicon-on-insulator microresonators D. Taillaert* a, W. Van Paepegem b, J. Vlekken c, R. Baets a a Photonics research group, Ghent University - INTEC, St-Pietersnieuwstraat
More informationT22. Torque transducer. Special features. Data sheet
T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring
More informationFOTECAP TOPAZ (4100 Series) Diazo standard capillary film
FOTECAP TOPAZ (4100 Series) Diazo standard capillary film 1. Description TOPAZ is available with dry film thicknesses of 18 μm (4118), 22 μm (4122), 25 μm (4125), 29 μm (4128), 37 μm (4135) and 52 μm (4150)
More informationHan High Temp. Description. Design overview. Han High Temp connectors remain robust and reliable for their entire lifespan!
Han High Temp Description Han High Temp is a new product series that is based on our well-established Han B and Han E series. We used high-quality materials with wide temperature ranges to produce connectors
More informationTuf-Lite II Fans H Hi Temp 3000HT Series Hub
Tuf-Lite II Fans H Hi Temp 3000HT Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II Hi Temp Fan Blades Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Hi Temp fan blades (Red) are
More informationTESTING EQUIPMENT SHEAR STRENGTH PARAMETERS SOIL. established in 1972
SOIL www.alfatestusa.com established in 1972 SOIL Used to perform large range of Triaxial tests on soil samples to determine the strength parameters and the mechanical properties. Capable of performing:
More information!"#$ % &"#$ ,-././ / 0. / / 1 1/ 1 ' !"%!" "&6 7-- (8$&8+. '(')*+,-+-#+.'
!"#$ % &"#$ '()*'( +!"#$,-,-././ / 0. / / 1 1/ 1 '!"%!"234534 "&6 7-- (8$&8+. "$ "$* '(')*+,-+-#+.' /'**0'(* !"!# $ % &'!!"!# $ % &'! ()#"* +!"!# $, $! "# $ $ %& !"!#$% # %&"!%'' %&%( )"%*! +,- %.&% ".%'
More informationFixPad - Create and Assembly instructions
6 7 8 2 9 10 4 3 5 11 1 B.o.m- Bill Of Materials Part No. Part name Production technology File name Martial Info Number of parts Supplier 1 persex sheet Laser cutting, bending Flat pattern base Flat pattern
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More information, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
CHPTER FEEER GGE Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm leaf 7 - Thickness of leaves included () -.-..,.,.,.7,.8,.9,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9,.
More informationBestech Australia U14/44 Garden Blvd, Tel: Dingley VIC 3172 Fax:
Load Cell F60X Bending beam load cell made of stainless steel, hermetically sealed. Approved up to 6000d R60 OIML. Level of protection IP 68. ATEX 94/9/CE version for hazardous area (option). Designed
More informationM series. Product information. Koki no-clean LEAD FREE solder paste. Contents. Lead free SOLUTIONS you can TRUST.
www.ko-ki.co.jp Ver. 42017e.2 Prepared on Oct. 26, 2007 Koki no-clean LEAD FREE solder paste Anti-Pillow Defect Product information This Product Information contains product performance assessed strictly
More informationNORMATIVE REFERENCES
American National Standards Institute NORMATIVE REFERENCES ANSI C135.30 1988 (expired 1993) Zinc-Coated Ferrous Ground Rod Electrodes for Overhead or Underground Lines American Society for Testing and
More informationWe offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting
We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting bending, pressing and forming turning and milling welding - stainless,
More informationConsideration of Tool Chamfer for Realistic Application of the Incremental Hole-Drilling Method
Consideration of Tool Chamfer for Realistic Application of the Incremental Hole-Drilling Method Nicola Simon 1, a *, Jens Gibmeier 1, b 1 Karlsruhe Institute of Technology (KIT), Institute for Applied
More information