TIME & FREQUENCY SERVICES IN MALAYSIA
|
|
- Derek Nelson
- 5 years ago
- Views:
Transcription
1 TIME & FREQUENCY SERVICES IN MALAYSIA Presented by : Mohd Rafiq Bin Abdul Kamal Metrologist National Metrology Laboratory SIRIM Berhad, Malaysia Time & Frequency Laboratory National Metrology Laboratory
2 BACKGROUND SIRIM BERHAD, MALAYSIA SIRIM (Standards and Industrial Research Institute of Malaysia) was established in 1975 under the SIRIM (Incorporation) Act 157 under Ministry of Science, Technology and Environment. As of 16 November 1995 SIRIM was corporatised as a government-owned company under the Minister of Finance Incorporated and was fully operationalised on 1 September 1996, later known as SIRIM Berhad.
3 BACKGROUND SIRIM BERHAD, MALAYSIA A government-owned company under the Minister of Finance Incorporated. Functions: To promote and undertake scientific industrial research To boost industrial efficiency and development To provide technology transfer and consultancy services To develop Malaysian standards and to promote standardization and quality assurance for greater competitiveness To enhance public and industrial welfare, health and safety
4 NATIONAL METROLOGY LABORATORY (NML) SIRIM BERHAD MALAYSIA
5 NATIONAL METROLOGY LABORATORY, MALAYSIA SENIOR GENERAL MANAGER S OFFICE Administration Finance Finance Planning Planning & Budgeting Budgeting Human Resources Management/Development International Relation/Cooperation Legal Metrology SENIOR GENERAL MANAGER 1 TECHNICAL COORDINATION & QUALITY SECTION Quality Management Technical Coordination Customer Service Affair Promotion & Publication OSHE Asset ELECTRICAL SECTION DC Voltage, Resistance & Current AC Voltage & Current AC-DC Transfer Power & Energy Capacitance, Inductance & AC Resistance Magnetics Voltage & Current Transformers Time & Frequency RF & Microwave Acoustics & Vibration Radiometry & Photometry MECHANICAL SECTION Mass Density - Solid Wavelength Standards Dimension & Angle Standards Surface Texture & Form Engineering & Coordinate Measurements Pressure & Vacuum Force & Torque Hardness THERMOPHYSICAL SECTION Resistance Thermometry Radiation Thermometry Thermocouple Thermometry Humidity Density - Liquid Viscosity FLOW SECTION Low Pressure Gas Medium & High Pressure Gas Static Liquid Dynamic Liquid CHEMISTRY SECTION Gas Standard Mixtures Metal and Non-Metal Analysis Electro-Chemistry Surface Analysis Characterization of Pure Organic Substance
6 NATIONAL METROLOGY LABORATORY, MALAYSIA Manpower 2014 GROUP EXISTING STAFFS METROLOGIST (Degree, Master Level) ASSISTANT METROLOGIST (Diploma Level) ADMINISTRATIVE ASSISTANT/TECHNICIAN (Certificate Level / Diploma) TOTAL 102 * Diploma and Degree : Physics, Electrical Engineering, Mechanical Engineering and Chemistry.
7 NATIONAL METROLOGY LABORATORY, MALAYSIA
8 NATIONAL METROLOGY LABORATORY, MALAYSIA National Involvement Ministry of Domestic Trade and Consumer Affairs. (Appointed as Custodian of Weight and Measures) Department of Environment of Malaysia (Appointed as Competence Laboratory For Calibration of Smoke Emission Meter, Gas Analyzer, Sound level meter). Road Transport Department (Appointed as Competence Laboratory by Tint meter, Smoke emission meter). Royal Police Malaysia (Appointed as Competence Laboratory For Calibration Of Breath analyzer, Speed Trap Meter, Tint meter). Government of Malaysia. (Appointed as the keeper of Malaysian Standard Time). Custom Department of Malaysia (Appointed as Competence Laboratory and Pattern Approval)
9 NATIONAL METROLOGY LABORATORY, MALAYSIA NATIONAL PHYSICAL STANDARDS MAINTAIN IN THE LABORATORY Parameter Unit Standard Uncertainty MASS Kilogram (kg) Set of stainless steel 1 kg masses mg LENGTH meter (m) Iodine-stabilized Helium-Neon 633 nm and 543 nm lasers MHZ (633 nm laser) 0.3 MHz (543 nm laser) TIME second Ensemble of five cesium time and frequency standards ELECTRIC VOLTAGE volt (V) Josephson and Zener Junction 1 volt and 10 volt array voltage reference standard. 0.1 ppm DC RESISTANCE ohm ( W ) Quantum Hall Effect Resistance Standards System. 0.1 ppm THERMODYNAMIC TEMPERATURE Kelvin (K ) Triple points of : Ag, Hg, H 2 O, Ga, Ira, Sn, Zn, A1, Ag. ( º C º C) 1.1 mk, 0.5 mk, 0.2 mk, 0.2 mk, 0.6 mk, 1.0 mk, 1.1 mk, 1.3 mk, 4.0 mk, 7.0 mk, LUMINOUS INTENSITY candela ( cd ) Standard luminous intensity candela (cd) 0.9 % AMOUNT OF SUBSTANCE mole (mol) Standard Ethanol Solution % CO & Propane in nitrogan 0.2 % -
10 NATIONAL METROLOGY LABORATORY, MALAYSIA Service Provided : High-end Calibration Of Measurement Standards And Measuring Instruments. Calibration And Verification Of Mandatory Equipment As Required By Law. Type / Custody Transfer Approval. MASS LENGTH Provision Of Metrological Training To Industries. Provision Of Consultation Services On Measurement Technologies. TIME TEMPERATURE
11 INTRODUCTION OF TIME & FREQUENCY LABORATORY Laboratory members: Dr Mohd Nasir Zainal Abidin (Senior Principal Metrologist) Ahmad Sahar Omar (Senior Metrologist) Mohd Rafiq Bin Abdul Kamal (Metrologist) 2 years experience in time and frequency Calibrate and prepare report of the calibration Daily monitoring the operational of Malaysia National Frequency Standard and Malaysian Standard Time Daily transferring the CCTF data to the BIPM server
12 INTRODUCTION OF TIME & FREQUENCY LABORATORY Calibration Services: Frequency measurement (range : 0.2 MHz to 225 MHz) Examples; Multifunction counter and Rubidium Frequency Standard. Time Interval measurement (range : 5 ns to 10 5 s) Example; stopwatch. Pulse Width measurement (range : 5 ns to 10 5 s) Speed measurement (number of pulses per hour) On-site measurement
13 INTRODUCTION OF TIME & FREQUENCY LABORATORY New calibration services to be offered in 2015 and 2016 Calibration of vehicle speed measurement instrument Calibration of GPS based speedometer Calibration of tachometer Payable NTP services for registered client
14 Ref1PS GPS1PS Ref5MHz Ref10MHz FrequencyDistribution Amplifier HP5087A1/5/10MHz TRACEABILITY Antena GPS GTSComonViewData forbipm (GPS&Counter LinuxPC DataLoger) Javad/TopconEuro-80 (GPSRx) Ext Ref Universal HP53131A Counter Ch. 1 Ch. 2 Cs1659 UTC(NMLS) Agilent 5071A5/10MHz Figure 1: Traceability of the NFS and UTC(NMLS) to UTC and TAI
15 STEERING OF THE NATIONAL FREQUENCY STANDARD Steering of the NFS or the epoch UTC(NMLS) is done by Caesium Reference Clock 5071A steering function to maintain the timing accuracy of the 1 pps signal to be within 1 s of the UTC and removal of the daily frequency offset, as determined from the Circular-T data.
16 CALIBRATION HIERARCHY
17 ANNUAL ACHIEVEMENT OF CALIBRATION SERVICES Annual Achievement of Calibration Services for year 2013 Description Quantity Stopwatch (Legal) 105 Stopwatch 4 Multifunction Counter 1 Rubidium Frequency Standard 6 GPS Frequency Standard 2 Total 118
18 CALIBRATION AND MEASUREMENT CAPABILITIES
19 ACCREDITATION
20 TIME DISSEMINATION Existing NTP : One unit Symmetricom S100 NTP New NTP : Two unit Gorgy Timing LEDI Network ITS.V2 Upgrading and testing the firmware for the following features : Add-on features of alert and NTP watcher for monitoring closely the synchronization status of the registered NTP clients. Shows the MAC address, IP address, time and number of requests of registered NTP clients requesting synchronization Alarm alert can be activated for each of registered NTP client for detecting no clients time synchronization request.
21 TIME DISSEMINATION WEB
22 FUTURE PLAN Remote time/frequency calibration - customer did not have to bring their equipments to NML Auto FTP the CCTF data to the BIPM server NTP services monitoring
23 TRAINING PLAN Training in remote calibration Training in clocks monitoring and development of clock algorithms Training in future technology of time and frequency
24 Time & Frequency Laboratory National Metrology Laboratory Thank You
25 Q and A Session Time & Frequency Laboratory National Metrology Laboratory
Activity Report of Time and Frequency Laboratory, NMIM (formally known as NML-SIRIM), Malaysia
Activity Report of Time and Frequency Laboratory, NMIM (formally known as NML-SIRIM), Malaysia Dr. Mohd. Nasir Senior Principal Metrologist Ahmad Sahar Senior Metrologist Mohd Rafiq Metrologist Mohd Izzulfitri
More informationREPORT OF TIME AND FREQUENCY LABORATORY (VIETNAM METROLOGY INSTITUTE)
Nguyen Bang Head of Time and Frequency Laboratory (TFL) Vietnam Metrology Institute (VMI) N 0 8, Hoang Quoc Viet Road, Caugiay District, Hanoi, Vietnam About Time & Frequency Laboratory (TFL) Time and
More informationThe Importance of Global Metrology for Standards, Industry and Trade: Metrology in a Dynamic World
The Importance of Global Metrology for Standards, Industry and Trade: Metrology in a Dynamic World v1 Dr Martin J.T. Milton Director of the BIPM Riyadh and Jeddah 18 and 19 May 2016 The importance of global
More informationSTATUS REPORT OF TIME AND FREQUENCY LAB. (VIETNAM METROLOGY INSTITUTE)
STATUS REPORT OF TIME AND FREQUENCY LAB. (VIETNAM METROLOGY INSTITUTE) Trieu Viet Phuong Head of Time and Frequency Laboratory, VMI Email: phuongtv@vmi.gov.vn DA NANG 11-2016 About TFL Laboratory of time
More informationMongolian Agency for Standardization and Metrology Time Frequency Lab. Unurbileg Darmaa Head, Length & Time and Frequency lab MASM
Mongolian Agency for Standardization and Metrology Time Frequency Lab Unurbileg Darmaa Head, Length & Time and Frequency lab MASM 2017-10-26 11/13/2017 Mongolian Agency for Standardization and Metrology
More informationOutline. Introduction Laboratory Status Activities Future Plans
Laboratory Report Time and Frequency Metrology Sub Division Research Center for Metrology Indonesian Institute of Sciences RCM LIPI Metrology Enabling Developing Economies in Asia, MEDEA Project for GPS
More informationTIME AND FREQUENCY ACTIVITIES AT THE CSIR NATIONAL METROLOGY LABORATORY
TIME AND FREQUENCY ACTIVITIES AT THE CSIR NATIONAL METROLOGY LABORATORY E. L. Marais and B. Theron CSIR National Metrology Laboratory PO Box 395, Pretoria, 0001, South Africa Tel: +27 12 841 3013; Fax:
More informationDEC Country Report. National Institute of Metrology (Thailand) By Mr.Pairoj Rattanangkul
National Institute of Metrology (Thailand) DEC Country Report By Mr.Pairoj Rattanangkul email : pairoj@nimt.or.th National Institute of Metrology (Thailand) 1 2 Table of Content Brief history of NIMT Where
More informationREPORT OF TIME AND FREQUENCY LABORATORY (VIETNAM METROLOGY INSTITUTE)
Trieu Viet Phuong Deputy head of Time and Frequency Laboratory (TFL) Vietnam Metrology Institute (VMI) N 0 8, Hoang Quoc Viet Road, Caugiay District, Hanoi, Vietnam About Time & Frequency Laboratory (TFL)
More informationHow accurate is a measurement? Why should you care? Dr. Andrew Roscoe
How accurate is a measurement? Why should you care? Dr. Andrew Roscoe Does V=IR? You are asked to confirm the hypothesis that V=IR. The following equipment is used: I, RMS Current (Amps) V, RMS Voltage
More informationStatus Report on Time and Frequency Activities at CSIR-NPL India
Status Report on Time and Frequency Activities at CSIR-NPL India (APMP -TCTF 2016) S. Panja, A. Agarwal, D. Chadha, P. Arora, P. Thorat, S. De, S. Yadav, P. Kandpal, M. P. Olaniya and V. N. Ojha (Da Nang,
More informationDEC Workshop on Participation in Co-ordinated Universal Time
Report (Philippines) DEC Workshop on Participation in Co-ordinated Universal Time 6 7 November 2014 NIM, Beijing, China Sabino Paulo B. Leones, Jr. National Metrology Laboratory (NML) Industrial Technology
More informationStatus Report on Time and Frequency Activities at National Physical Laboratory India
Status Report on Time and Frequency Activities at National Physical Laboratory India (TCTF 2015) Ashish Agarwal *, S. Panja. P. Arora, P. Thorat, S. De, S. Yadav, P. Kandpal, M. P. Olaniya, S S Rajput,
More informationTraceability measurement results of accurate time and frequency in Bosnia and Herzegovina
INFOTEH-JAHORINA Vol. 11, March 2012. Traceability measurement results of accurate time and frequency in Bosnia and Herzegovina Osman Šibonjić, Vladimir Milojević, Fatima Spahić Institute of Metrology
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 1 Industrial
More informationCURRENT ACTIVITIES OF THE NATIONAL STANDARD TIME AND FREQUENCY LABORATORY OF THE TELECOMMUNICATION LABORATORIES, CHT TELECOM CO., LTD.
CURRENT ACTIVITIES OF THE NATIONAL STANDARD TIME AND FREQUENCY LABORATORY OF THE TELECOMMUNICATION LABORATORIES, CHT TELECOM CO., LTD., TAIWAN C. S. Liao, P. C. Chang, and S. S. Chen National Standard
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 4613 Northwest
More informationSMD ENS Metrology - National Standards. Short overview. Hugo Pirée. World Metrology Day 2018 Brussels.
SMD ENS Metrology - National Standards Short overview Hugo Pirée World Metrology Day 2018 Brussels Federal government FPS ECONOMY Gen. Direction QUALITY & SAFETY Division METROLOGY 14 persons National
More informationTime and Frequency Research Activity in NIM
Time and Frequency Research Activity in NIM Gao Xiaoxun National Institute of Metrology Bei San Huan Dong Lu No.18 Beijing P.R.China Abstract This paper will introduce scientific research activities in
More informationHaruo Saito. National Institute of Information and Communications Technology
Calibration system at NICT Haruo Saito National Institute of Information and Communications Technology Organization of NICT Content Calibration system Calibration system Carried in system and remote system
More informationNPLI Report. for. Technical workshop and inter-laboratory comparison exercise for GPS time-transfer and calibration techniques under MEDEA
NPLI Report for Technical workshop and inter-laboratory comparison exercise for GPS time-transfer and calibration techniques under MEDEA Dr. V. N. Ojha, Dr. A. Agarwal, Mrs. D. Chaddha, Dr. S. Panja, Dr.
More informationMetrology at the service of the economy, society and citizens
Bureau International des Poids et Mesures Metrology at the service of the economy, society and citizens Dr Martin Milton Director, BIPM 26 th Sept 2013 Bureau International des Poids et Mesures Established
More informationTime and Frequency Laboratory Measurement Units, Standards and Services Department (National Metrology Institute) MUSSD- Sri Lanka
Time and Frequency Laboratory Measurement Units, Standards and Services Department (National Metrology Institute) MUSSD- Sri Lanka Introduction Measurement Units, Standards and Services Department (MUSSD
More informationStatus Report on Time and Frequency Activities at NPL India
Status Report on Time and Frequency Activities at NPL India (APMP TCTF 2013) A. Sen Gupta, A. Chatterjee, A. K. Suri, A. Agarwal, S. Panja P. Arora, S. De, P. Thorat, S. Yadav, P. Kandpal, M. P. Olaniya
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TECHMASTER ASIA (Thailand) Co., Ltd 5/41
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Masy BioServices 27 Lomar Park Drive Pepperell, MA 01463-1486 Mr. Keith Kelly Phone: 978-433-6279 Fax: 978-433-0442 E-mail: keith.kelly@masy.com URL: http://www.masy.com
More informationCRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF TIME AND FREQUENCY METROLOGY
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF TIME AND FREQUENCY METROLOGY Approved By: Chief Executive Officer: Ron Josias Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee
More informationCCTF 2012 Report on Time & Frequency activities at National Physical Laboratory, India (NPLI)
CCTF 2012 Report on Time & Frequency activities at National Physical Laboratory, India (NPLI) Major activities of the Time & Frequency division of NPLI in the last three years have been: 1. Maintenance
More informationReport of the TC Time and Frequency. Ramiz Hamid TC-TF Chair, TÜBİTAK UME, Turkey
Report of the TC Time and Frequency Ramiz Hamid TC-TF Chair, TÜBİTAK UME, Turkey Contents TC-TF meeting and T&F strategy EMRP Projects and future optical redefinition of the second Time scale generation
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PRESSURE Hydraulic Pressure (Gauge) Hewett Road Gapton Hall Industrial Estate Great Yarmouth Norfolk NR31 0NN Contact: Mr J Gunn Tel: +44
More informationMEASUREMENT UNITS STANDARDS AND SERVICES DEPARTMENT(MUSSD) SRI LANKA PRESENTED BY: R.G.S.A. PERERA
MEASUREMENT UNITS STANDARDS AND SERVICES DEPARTMENT(MUSSD) SRI LANKA PRESENTED BY: R.G.S.A. PERERA SRI LANKA Government type: Democratic Socialist Republic Capital city: Sri Jayawardenapura Location: South
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Alliance Calibration 11402 Reading Road Cincinnati,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 QUALITY SYSTEMS LAB, INC. 7604 North West 6 th Ave Boca Raton, FL 33487 Bryan Wilkerson Phone: 561-999-1896 CALIBRATION
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Pte. Ltd. Blk
More informationScope of Accreditation For Alliance Calibration. Calibration
Scope of Accreditation For Alliance 11402 Reading Road Cincinnati, OH 45241 Sidney Taylor 513-769-1200 In recognition of a successful assessment to ISO/IEC 17025:2005 to the following and Measurement Capabilities,
More information2-5 Frequency Calibration
2-5 Frequency SAITO Haruo, IWAMA Tsukasa, TSUCHIYA Shigeru, and KOYAMA Yasuhiro The Japan Standard Time (JST) and the Coordinated Universal Time (UTC(NICT)), which are constructed by National Institute
More informationTechnical capabilities of military calibration laboratories
Technical capabilities of military calibration laboratories Measurement domain Measuring range Measurement Remarks 3 ACCELERATION, VELOCITY AND DISTANCE Acceleration of Vibration - sensitivity (0,1 1000
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Science Park Eindhoven 5108, Gebouw 2 5692 EC Son en Breugel The Netherlands Location Abbreviation/ location Science Park Eindhoven
More informationLITHUANIAN NATIONAL TIME AND FREQUENCY STANDARD
LITHUANIAN NATIONAL TIME AND FREQUENCY STANDARD Rimantas Miškinis Semiconductor Physics Institute A. Goštauto 11, Vilnius 01108, Lithuania Tel/Fax: +370 5 2620194; E-mail: miskinis@pfi.lt Abstract The
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 SIMCO ELECTRONICS 6295 Ferris Square San Diego, CA 92121 Jeremy Cooper Phone: 858 200 7027 CALIBRATION Valid
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 3000 Northwoods
More informationThis annex is valid from: to Replaces annex dated:
Premises: (Son) & Nijmegen LF 0 0 DC/LF Quantities LF 1 0 DC Voltage measuring and generating 10 V 5 10-7 U zenerreferences 1 V and 1.018 V 2.3 10-6 U zenerreferences 0 V to 10 V 0.3 V 10 V to 200 mv 3
More informationMEASUREMENT UNITS STANDARDS AND SERVICES DEPARTMENT(MUSSD) SRI LANKA
COUNTRY REPORT: MEASUREMENT UNITS STANDARDS AND SERVICES DEPARTMENT(MUSSD) SRI LANKA PRESENTED BY: R.G.S.ANURADHA. PERERA SRI LANKA Government type: Democratic Socialist Republic Location: South Asia,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 6878 Santa
More informationOptical frequency combs for fundamental metrology and gas spectroscopy
Optical frequency combs for fundamental metrology and gas spectroscopy The Michelsen Centre workshop, September 25 2009 Dr. Harald Hauglin Justervesenet - Norwegian Metrology Service Outline Overview of
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. J. A. KING 354 Riverchase Way Lexington, SC Connie Foster Phone: CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 J. A. KING 354 Riverchase Way Lexington, SC 29072 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: February 28, 2021 Certificate Number: 1741.12 In recognition
More informationCALIBRATION PROCEDURE FOR STABILIZED LASERS USING THE METHOD OF OPTICAL BEATS MEASUREMENT UNCERTAINTY
U.P.B. Sci. Bull., Series A, Vol. 69, No. 1, 007 ISSN 13-707 CALIBRATION PROCEDURE FOR STABILIZED LASERS USING THE METHOD OF OPTICAL BEATS MEASUREMENT UNCERTAINTY Elena DUGHEANU 1 Lucrarea descrie metoda
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
More informationSTABILITY AND ACCURACY OF THE REALIZATION OF TIME SCALE IN SINGAPORE
90th Annual Precise Time and Time Interval (PTTI) Meeting STABILITY AND ACCURACY OF THE REALIZATION OF TIME SCALE IN SINGAPORE Dai Zhongning, Chua Hock Ann, and Neo Hoon Singapore Productivity and Standards
More informationSoftware configuration Precise antenna positioning. Software configuration Precise antenna positioning
Precise antenna positioning 43 Precise antenna positioning 44 36 Precise antenna positioning 44 Precise antenna positioning 44 37 Precise antenna positioning The US National Oceanic and Atmospheric Administration
More informationTime and Frequency Laboratory Measurement Units, Standards. (National Metrology Institute) MUSSD-Sri Lanka
Time and Frequency Laboratory Measurement Units, Standards and Services Department (National Metrology Institute) MUSSD-Sri Lanka Introduction Measurement Units, Standards and Services Department (MUSSD
More informationMeasurements and Distribution: PNT and Other Applications
NIST Time and Frequency Metrology Precision Time and Frequency Measurements and Distribution: PNT and Other Applications Tom O Brian Chief, NIST Time and Frequency Division and NIST Quantum Physics Division
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 SIMCO SCIENTIFIC INSTRUMENT REPAIR AND CALIBRATION SERVICES CO., LTD. Flat 404 North Software Tower, NanSha IT Park Panyu NanSha, Guangzhou,
More informationProgramme of work and budget for Plans for Time Department
Programme of work and budget for 2013-2015 Plans for 2016-2019 Time Department Elisa Felicitas Arias 101 th Meeting of the CIPM, Session 1 BIPM, Sèvres, 8 June 2012 Programme of work 2013-2015 Continues
More informationTRACEABLE MEASUREMENT CAPABILITY
PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHSTAR CALIBRATION, INC. 1045 26th Place NW Owatonna, MN 55060 John Moorhouse Phone: 507 444 9111 CALIBRATION Valid To: February 29, 2020 Certificate Number:
More informationNational time scale UTC(SU) and GLONASS system time scale: current status and perspectives
State Scientific Center of the Russian Federation National Research Institute for Physical-Technical and Radio Engineering Measurements National time scale UTC(SU) and GLONASS system time scale: current
More informationReport on the Activities in Electricity and Magnetism within National Institute of Metrology (NIM), China CCEM 2017
Report on the Activities in Electricity and Magnetism within National Institute of Metrology (NIM), China CCEM 2017 RESEARCH PROGRESS DC&LF 1. Joule Balance The new Joule balance has been mounted by the
More informationPrecise Time Facility (PTF) for Galileo IOV
Von der Erde ins All. Und zurück. Intelligente Lösungen für Industrie und Wissenschaft. From Earth to Space. And back. Intelligent solutions for industry and science. E a r t h S p a c e & F u t u r e
More informationHistory of SI Base Units
History of SI Base Units The creation of the decimal Metric System at the time of the French Revolution and the subsequent deposition of two platinum standards representing the metre and the kilogram,
More informationBUREAU INTERNATIONAL DES POIDS ET MESURES
Rapport BIPM-2008/03 BUREAU INTERNATIONAL DES POIDS ET MESURES DETERMINATION OF THE DIFFERENTIAL TIME CORRECTIONS FOR GPS TIME EQUIPMENT LOCATED AT THE OP, TCC, ONBA, IGMA and CNMP W. Lewandowski and L.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 CONSUMERS ENERGY/LABORATORY SERVICES Laboratory Services 135 West Trail Street Jackson, MI 49201 Nick Serafin Phone: 517 788 2238 naserafin@cmsenergy.com
More informationBureau International des Poids et Mesures. International Recognition of NMI Calibration and Measurement Capabilities: The CIPM MRA
Bureau International des Poids et Mesures International Recognition of NMI Calibration and Measurement Capabilities: The CIPM MRA Prof. Michael Kühne International School of Physics Enrico Fermi Metrology
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precisión Calibration de Mexico S.
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Vietnam LTD.
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,
More informationA transportable optical frequency comb based on a mode-locked fibre laser
A transportable optical frequency comb based on a mode-locked fibre laser B. R. Walton, H. S. Margolis, V. Tsatourian and P. Gill National Physical Laboratory Joint meeting for Time and Frequency Club
More informationTR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By:
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL LF METROLOGY Approved By: Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of Approval: 2015-08-26 Date of
More informationNov.6-7,2014 DEC Workshop on Participation in Coordinated Universal Time. Aimin Zhang National Institute of Metrology (NIM)
Nov.6-7,2014 DEC Workshop on Participation in Coordinated Universal Time Aimin Zhang National Institute of Metrology (NIM) Introduction UTC(NIM) at old campus Setup of new UTC(NIM) Algorithm of UTC(NIM)
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453 8003 CALIBRATION Valid To: March 31, 2019 Certificate
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that E2b Calibration, LLC 521 Fifth Avenue Chardon, OH 44024 has been assessed
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 DIGITAL MEASUREMENT METROLOGY INC. (A TRESCAL COMPANY) 26 Automatic Road, Unit 4 Brampton, Ontario, CANADA L6S 5N7 Nana Mantey Phone:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI-NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI-NCSLI Z540-1-1994 QUALITY CALIBRATION SERVICE, INC. 5515 S Westridge Dr. New Berlin, WI 53151 Martin Lukomski Phone: 414 256 8900 CALIBRATION Valid To:
More informationExpert Site Visit Report
Expert Site Visit Report Time and Frequency Metrology Sub Division Research Center for Metrology Indonesian Institute of Sciences RCM LIPI Metrology Enabling Developing Economies in Asia, MEDEA Project
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 INDUSTRIAL PROCESS MEASUREMENT, INC. 3910 Park Avenue, Unit 7 Edison, NJ 08820 Mark Gural Phone: 732 632 6400 www.instrumentation2000.com
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Lockheed Martin Stennis IMC Bldg 5100 Stennis
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Charlotte 8334 Arrowridge Blvd.,
More informationTHE TIMING ACTIVITIES OF THE NATIONAL TIME AND FREQUENCY STANDARD LABORATORY OF THE TELECOMMUNICATION LABORATORIES, CHT CO. LTD.
THE TIMING ACTIVITIES OF THE NATIONAL TIME AND FREQUENCY STANDARD LABORATORY OF THE TELECOMMUNICATION LABORATORIES, CHT CO. LTD., TAIWAN P. C. Chang, J. L. Wang, H. T. Lin, S. Y. Lin, W. H. Tseng, C. C.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN Connie Foster Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN 37062 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: May 31, 2019 Certificate Number: 1741.08
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Denver 3521 Lewiston St, Suite 12
More informationPRECISE RECEIVER CLOCK OFFSET ESTIMATIONS ACCORDING TO EACH GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) TIMESCALES
ARTIFICIAL SATELLITES, Vol. 52, No. 4 DOI: 10.1515/arsa-2017-0009 PRECISE RECEIVER CLOCK OFFSET ESTIMATIONS ACCORDING TO EACH GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) TIMESCALES Thayathip Thongtan National
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate
More informationRapid UTC: a step forward for enhancing GNSS system times Elisa Felicitas Arias
Rapid UTC: a step forward for enhancing GNSS system times Elisa Felicitas Arias Eighth Meeting of the International Committee on Global Navigation Satellite Systems (ICG) Dubai, United Arab Emirates 9-14
More informationCERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration 5909 Breckenridge
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 SIMCO ELECTRONICS 6295 Ferris Square San Diego, CA 92121 Jeremy Cooper Phone: 858 200 7027 CALIBRATION Valid
More informationSERVICE CATALOGUE AND PRICELIST
SERVICE CATALOGUE AND PRICELIST Initial version: 9 January 2008 Last updated: 22 January 2018 CONTENTS 1 Service policy... 6 2 Framework and Terms of Service... 7 2.1 Groups of services... 7 2.2 Information
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENI Labs 3120 Independence Dr. Fort Wayne, IN 46808 Andrew Burd Phone: 260 471 6775 CALIBRATION Valid To: April 30, 2018 Certificate
More informationSpecific Accreditation Criteria Calibration ISO/IEC Annex. Electrical metrology
Specific Accreditation Criteria Calibration ISO/IEC 17025 Annex Electrical metrology January 2018 Copyright National Association of Testing Authorities, Australia 2014 This publication is protected by
More informationAC Voltage Standards With Quantum Traceability
NPL Electromagnetics day 29/11/2007 AC Voltage Standards With Quantum Traceability Kein Marshall, Dale Henderson, Prain Patel and Jonathan Williams. Background To Quantum Voltage Metrology Existing DC
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453-8003 CALIBRATION Valid To: July 31, 2017 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Caliber Test & ment 2100 W. 6th Ave. Broomfield, CO 80020 Everett Hedrick Phone: 303 469 5335 CALIBRATION Valid to: May 31, 2019 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC South Lakes Drive Charlotte, NC Connie Foster Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 14200 South Lakes Drive Charlotte, NC 28273 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: August 31, 2019 Certificate Number:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 MTS METROLOGY AND CALIBRATION LABORATORY 14000 Technology Drive Eden Prairie, MN 55344 Kevin Rust Phone: 952 937 4790 www.mts.com CALIBRATION
More informationCertificate of Calibration No
Federal Department of Justice olice FDJP Federal Office of Metrology METAS Certificate of Calibration No 7-006 Object GPS rcvr type Septentrio PolaRx4TR PRO serial 005 Antenna type Aero AT-675 serial 500
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APTIV CONTRACT SERVICES. S. DE R. L. DE C. V. CALIBRATION LAB Mexico Technical Center Ave. Hermanos Escobar #5756 Cd. Juarez, Chihuahua C.P. 32310, Mexico Ricardo
More informationFederal Department of Justice and Police FDJP Federal Office of Metrology METAS. Measurement Report No
Federal epartment of Justice olice FJP Federal Office of Metrology METAS Measurement Report No 9-0009 Object GPS receiver type Septentrio PolaRxeTR serial 05 Antenna type Aero AT-775 serial 5577 Cable
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Portland 14058 SW Milton Court Portland,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 BHD Test & ment 2100 W. 6th Ave. Broomfield, CO 80020 Everett Hedrick Phone: 303 469 5335 CALIBRATION Valid to: May 31, 2019 Certificate
More information