DEC Country Report. National Institute of Metrology (Thailand) By Mr.Pairoj Rattanangkul
|
|
- Kenneth Thomas
- 5 years ago
- Views:
Transcription
1 National Institute of Metrology (Thailand) DEC Country Report By Mr.Pairoj Rattanangkul pairoj@nimt.or.th National Institute of Metrology (Thailand) 1
2 2 Table of Content Brief history of NIMT Where we stand? How about Acoustics and Vibration Metrology Department? Example of earthquake in Thailand
3 BRIEF HISTORY OF NIMT 3
4 NIMT s brief history NIMT is established according to the National Metrology Development Act B.E (1997) NIMT was found in 1 June 1998 NIMT is an autonomous institution under Ministry of Science and Technology NIMT has 2 campuses; one in Pathum-thani and the other within the campus of the Ministry of Science and Technology, Bangkok 4
5 NIMT in 1998 NIMT was found right at the outbreak of the Tom-Yam-Koong Asian Economic Crisis IMMEDIATE PROBLEM: How to finance NIMT s development plan!!?? 5
6 Financial Needs: JBIC Loans 1st Loan: 29 September Million JPY (281 Million THB) for National Metrology System Development #1 2nd Loan:22 September Million JPY (880 Million THB) for National Metrology System Development #2 6
7 7 New Laboratories Started the construction in 2003 Completed in 2005 Official opening in 2006 DEC Country Report
8 47 Labs with strictly controlled temperature and humidity Good vibration control Energy conservation (operated 24 h) Easy maintenance with less interruption Good working environments Completed: 7 July 2005 Moving in: December 2005 Official opening: August
9 9 Technical support from Other NMIs Australia Germany by PTB NMI China Japan by NMIJ/JICA DEC Country Report
10 WHERE WE STAND? 10
11 NIMT in 2014: capacities Staff: 196 Metrologists: 131 (Bachelor: 38, Master: 50, PhD: 41, Others: 2) Supporting staff: 65 (Bachelor: 30, Master: 17, Others: 18) Organisation: Metrology Departments: 7 Laboratories: 47 Administrative departments: 2 MIS Center: 1 Budget: 200 MBaht Government Budget 30 MBaht from services 11
12 NIMT s capability figures 384 calibration services and 18 Certified / Reference Materials 98 Key comparisons 452 Measurement Capabilities listed CIPM-MRA s Appendix C (CMCs) 3,900 calibration certificates issued annually 12
13 Quality Management System 13 Quality management system complies with ISO/IEC 17025:2005 and ISO 9001:2008 for support services Accredited by DKD (currently : DAkkS) in 2001, re-assessment in 2006,2011 and surveillance visit once every months Accredited by IA Japan in 2004, reassessment in 2007 and 2010 and surveillance visit once every 12 months, Transferred to TISI in 2012
14 Number of International Recognised CMCs AC voltage, current, and power DC voltage, current, and resistance Impedance up to the MHz range Mass, mass standards Pressure Frequency Time interval Temperature Amount of substance, ph Laser frequencies Dimensional metrology Properties of detectors and sources Amount of substance, Gases Amount of substance, Advanced materials Amount of substance, Food Acoustics, Ultrasound and Vibration Amount of substance, Water Amount of substance, Fuels Amount of substance, Biological fluids and materials Amount of substance, Advanced materials
15 NIMT Metrology Clubs Vibration Torques Temperature Pressure Mass Hardness Electrical Dimension Acoustics
16 Number of In Country Inter- Lab. Comparisons Participations Mass Amount of substance Length Electricity and Menetism Thermometry Acoustics, Ultrasound and Vibration Photometry and Radiometry Time and Frequency 16
17 NIMT s Contribution to National Accreditation Scheme 80 Technical Assessors to support TLAS 17 calibration guidelines 4 staff in TLAS sub-committees 17
18 Technical Cooperation with other NMIs 18 CLMV group countries (Cambodia, Laos, Myanmar and Vietnam) South Asia, Mongolia, Fiji, Philippines, Malaysia, Singapore,Brunei and Indonesia DEC Country Report
19 19 Number of Trainees and Participants Sri Lanka Pakistan Nepal Mongolia India Fiji Bangladesh Vietnam Singapore Philippines Myanmar Malaysia Lao Indonesia Cambodia Brunei Total trainees: DEC Country Report
20 20 Roles in International Metrology Communities One of the founder members of APMP-DEC Hosted 2 APMP General Assemblies in 2000 and 2010 Hosted 3 IMEKO International Technical Committee Conferences in 2010: Mass and related quantities, Hardness and Vibration Provided trainings to metrologists, scientists and engineers from ASEAN, DEC & South Asian Nations DEC Country Report
21 21 Before Staff (in 1998) 15 labs in 6 departments Received technical support from Australia, Germany, China, Japan CMCs published in KCDB Website for electrical quantities ONLY Present 196 staff 47 labs in 7 departments Have technical cooperation with CLMV, South Asia, Philippine, and Indonesia CMCs published in KCDB Website for most measurement quantities DEC Country Report
22 ABOUT ACOUSTICS AND VIBRATION METROLOGY DEPARTMENT? 22
23 Organization Chart National Institute of Metrology (Thailand) National Metrology Board Quality Manager Audit Committee Internal Auditor Director Experts Deputy Director (1) Deputy Director (2) Policy and Strategy Department Administration Department Mechanical Metrology Department Electrical Metrology Department Thermometry Metrology Department Acoustics & Vibration Metrology Department Chemical Metrology & Biometry Department Dimensional Metrology Department Photometry Metrology Department - Policy and Strategy Sec. - NIMT Fund & Budgeting Sec. - International Relation Sec. - Public Relations Sec. - Industrial Relation Sec. - Documentation Sec. - Office of the Secretary Management Information Technology Center - Account and Finance Sec. - Human Resources Sec. - Building & Maintenance Sec. - Procurement Sec. - Legal Sec. - General Affairs - Mass Lab. - Density and Volume Lab. - Force Lab. - Torque Lab. - Hardness Lab. - Pressure Lab. - Vacuum Lab. - Flow Lab. - DC Voltage Lab. - AC Voltage Lab. - Resistance Lab. - Capacitance & Inductance Lab. - AC Power Lab. - Laser Power Lab. - High Voltage Lab. - Magnetics Lab. - Time & Frequency Lab. - RF & Microwave Lab. - Temperature Lab. Fixed Points SPRT Thermocouple Liquid-in-glass Thermometer Digital Thermometer - Radiation Thermometry Lab. - Humidity Lab. - Acoustics Lab. - Vibration Lab. - Ultrasound Lab. - Organic Analysis Lab. - Inorganic Analysis Lab. - Electrochemical Analysis Lab. - Bio-analysis Lab. - Gas Analysis Lab. - Wavelength Lab. - Length Lab. - Diameter Lab. - Angular Lab. - Form Lab. - Surface Texture Lab. - CMM &Gear Lab. - Line Scale Lab. - Photometry Lab. - Colorimetry Lab. - Radiation Lab. - Fibre Optics Lab. Quality System ISO 9000 Quality System & Competence ISO/IEC DKD-K IA Japan CN005 Direct Access National Institute of Metrology (Thailand) 23
24 Staff Head of A&V Department and 1 supporting personnel Acoustics Laboratory 2 (Bachelor s degree) 1 (Master s degree) 1 (Ph.D.) 1 (Ph.D. candidate) Vibration Laboratory 2 (Master s degree) 1 (Ph.D.) Ultrasound Laboratory 1 (Bachelor s degree) 1 (Master s degree) 1 (Ph.D.) 1 (Ph.D. candidate) National Institute of Metrology (Thailand) 24
25 Department Chart Acoustics & Vibration and Vibration Metrology Metrology Department Department Acting Head : Tawat Changpan, PL.10 Vibration Laboratory Acoustics Laboratory Ultrasonic Acoustics Laboratory Authorized Person : Mr.Pairoj Rattanangkul PL.9 Primary Calibration Charge Sensitivity (modulus) Dr.Chompoonoot H., PL.7* Mr.Pairoj R., PL.9 Authorized Person : Ms.Surat Leeudomwong PL.7 Primary Calibration of Pressure Sensitivity of Standard Microphone Ms.Surat L., PL.7* Authorized Person : Mr. Komgrit J., PL.7 Mr. Priwann P., PL.6 Dr. Pachariya P., PL.7 Ms. Arinchaya P., PL.5 Comparison Calibration of Charge Sensitivity(modulus), Acceleration (modulus) and Conditioning Amplifier Ms.Benjawan R., PL.7* Dr.Chompoonoot H., PL.7 Mr.Pairoj R., PL.9 Calibration of Sound Level Meter and Sound Calibration Ms.Panisara K., PL.5* *Mr.Archtirat P., PL6* Dr.Yada C., PL6* National Institute of Metrology (Thailand) 25
26 Current Status for Calibration System and Facilities Vibration Laboratory Primary Vibration Transducer Calibration 40 Hz-5kHz (Fringe Counting, Minimum Point Method) Secondary Vibration Transducer System 40 Hz 5kHz Conditioning Amplifier Calibration System 20 Hz to 7 khz
27 Current Status for Calibration System and Facilities Vibration Laboratory Primary Vibration Transducer Calibration System from Low Frequency to High Frequency by Sine Approximation method (SAM) (0.4 Hz to 20 khz) Secondary Low Vibration Transducer Calibration System (0.4 Hz to 80 Hz)
28 Current Status for Calibration System and Facilities Vibration Laboratory Primary Medium-Shock Transducer Calibration System (20 m/s 2 to 50,000 m/s 2 ) Primary High-Shock Transducer Calibration System (10,000 m/s 2 to 750,000 m/s 2 ) Shock Comparison Calibration System (POP) up to 2000g
29 Primary Vibration Transducer Calibration System of NIMT National Institute of Metrology (Thailand) 29
30 Uncertainty Budget This system is based on ISO Method 1 : Fringe-counting method - range 50 Hz to 800 Hz Uncertainty budget : 0.5 % - Method 2 : Minimum-point method range 800 Hz to 5 khz Uncertainty budget : 0.8 % National Institute of Metrology (Thailand) 30
31 System of Vibration Transducer Comparison Calibration
32 Uncertainty Budget This system is based on ISO Uncertainty budget : 1.0 % National Institute of Metrology (Thailand) 32
33 System of Primary Vibration Transducer Calibration ( Very low and high frequency )
34 Uncertainty Budget For low frequency National Institute of Metrology (Thailand) 34
35 Uncertainty Budget For high frequency 10 Hz National Institute of Metrology (Thailand) 35
36 Secondary Low Vibration Transducer Calibration System (0.4 Hz to 80 Hz)
37 Uncertainty Budget of Low Frequency Vibration Calibration Calibration according to ISO (comparison method) Frequency range 0.4 Hz to 160 Hz Air-bearing long stroke vibration exciter for vertical excitation with sensor weight up to 3 kg payload and sensor weight up to 5 kg payload horizontal. Uncertainty budget - At frequency 0.4 Hz to <1Hz 1.5% / 1.5 degree - At frequency 1 Hz to 63 Hz 0.75% / 0.75 degree - At frequency >63 Hz to 160 Hz 1.0% / 1.0 degree National Institute of Metrology (Thailand) 37
38 System of Primary Shock Calibration
39 Uncertainty Budget of Medium Shock System National Institute of Metrology (Thailand) 39
40 Uncertainty Budget of High Shock System National Institute of Metrology (Thailand) 40
41 Current Status for Calibration System and Facilities Acoustics Laboratory System of Microphone calibration 20 Hz-20kHz (Reciprocity Calibration Method) Free-field Calibration System 31.5 Hz 16 khz Sound Calibrator Calibration System 250 Hz,1 khz and Multi-frequency Calibrator 31.5 Hz 16 khz National Institute of Metrology (Thailand) 41
42 System of Microphone Calibration National Institute of Metrology (Thailand) 42
43 System of Sound Level Meter Calibration National Institute of Metrology (Thailand) 43
44 Anechoic Chamber National Institute of Metrology (Thailand) 44
45 System of Sound Calibrator Calibration National Institute of Metrology (Thailand) 45
46 Current Status for Calibration System and Facilities Ultrasound Laboratory Primary ultrasound power calibration (Radiation force balance method) Frequency range : 1 MHz to 20 MHz Power : 1 mw to 15 W Primary ultrasound pressure calibration system (Planar scanning method and optical interferometry) Frequency range : 1 MHz to 20 MHz National Institute of Metrology (Thailand) 46
47 Ultrasound Power at NIMT IEC61161 Ultrasonics measurement Radiation force balances and performance requirements National Institute of Metrology (Thailand) 47
48 Ultrasound Pressure at NIMT National Institute of Metrology (Thailand) 48
49 Ultrasound Power Meter at NIMT National Institute of Metrology (Thailand) 49
50 50 EXAMPLE OF EARTHQUAKE IN THAILAND
51
52 earthqua ke size The earthquakes each year Chiang-Rai: 2014 Kanchanaburi: 1983 Chiang-Mai: 2006 Chiang-Rai: 1994 Phuket: 2012 The average annual number of earthquakes
53
54
55
56
57 Thank you for your attention National Institute of Metrology (Thailand) 57
33 rd Asia Pacific Metrology Programme General Assembly 30 November 1 December 2017 New Delhi, India
33 rd Asia Pacific Metrology Programme General Assembly 30 November 1 December 2017 New Delhi, India Laboratory Report National Metrology Institute of Japan (NMIJ) National Institute of Advanced Industrial
More informationCER-ASEAN Integration Partnership Forum. CER-ASEAN participation in global frameworks for international recognition and harmonisation of measurement
CER-ASEAN Integration Partnership Forum CER-ASEAN participation in global frameworks for international recognition and harmonisation of measurement Dr Angela Samuel Director, International Relations Mr
More informationTIME & FREQUENCY SERVICES IN MALAYSIA
TIME & FREQUENCY SERVICES IN MALAYSIA Presented by : Mohd Rafiq Bin Abdul Kamal Metrologist National Metrology Laboratory SIRIM Berhad, Malaysia Time & Frequency Laboratory National Metrology Laboratory
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TECHMASTER ASIA (Thailand) Co., Ltd 5/41
More informationBureau International des Poids et Mesures. International Recognition of NMI Calibration and Measurement Capabilities: The CIPM MRA
Bureau International des Poids et Mesures International Recognition of NMI Calibration and Measurement Capabilities: The CIPM MRA Prof. Michael Kühne International School of Physics Enrico Fermi Metrology
More informationTable of Contents. Compendium SPEKTRA. Calibration Systems CS18. Vibration and Shock Exciters. Vibration Control Systems. Services
Products & Services Table of Contents Compendium SPEKTRA Calibration Systems CS18 CS18 - Applications CS18 - Acceleration CS18 - Shock CS18 - Acoustics References, Options and Accessories Vibration and
More informationContinuous development of the national standard for vibration
Continuous development of the national standard for vibration by Ian Veldman, National Metrology Laboratory, CSIR In this fast technologically-advancing world, higher measurement accuracy is part of the
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
code Location code Customers Sites 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Yussof Taha Tel: +673-2-386475
More informationAnnex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex the Accreditation Certificate D-K-15183-01-00 according DIN EN ISOIEC 17025:2005 Period of validity: 19.12.2017 18.12.2022 Holder of
More informationJoint ILAC CIPM Communication regarding the. Accreditation of Calibration and Measurement Services. of National Metrology Institutes.
Joint ILAC CIPM Communication regarding the Accreditation of Calibration and Measurement Services of National Metrology Institutes 7 March 2012 Authorship This document was prepared by the International
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Pte. Ltd. Blk
More informationAccreditation No: LAB 131. AL-MEEZAN INDUSTRIAL METROLOGY SERVICES House No. 22, Block C, Sabzazar Scheme Lahore Pakistan
Issue : 10/08/15 Accreditation No: Awarded to AL-MEEZAN INDUSTRIAL METROLOGY SERVICES House No. 22, Block C, Sabzazar Scheme Lahore Pakistan The scope of accreditation is in accordance with the standard
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 4613 Northwest
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 1 Industrial
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Alliance Calibration 11402 Reading Road Cincinnati,
More informationCIPM and CCPR What are these organizations and how do they affect my testing results. Maria Nadal Photometry, Surface Color and Appearance NIST
CIPM and CCPR What are these organizations and how do they affect my testing results Maria Nadal Photometry, Surface Color and Appearance NIST CIE USA Annual Meeting October 6-7, 2014 Calibration Laboratory
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENI Labs 3120 Independence Dr. Fort Wayne, IN 46808 Andrew Burd Phone: 260 471 6775 CALIBRATION Valid To: April 30, 2018 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 HN PROFICIENCY TESTING INC. 10219 Coral Reef Way Indianapolis, IN 46256 Henrik Nielsen Phone: 317 713 2988 Web: http://www.hn-proficiency.com/ PROFICIENCY TESTING
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro
More informationCONTENTS APMP GA 2008 EC/TCC/DEC 2009 MRA Success Stories APMP GA Dr. Woogab Lee, Executive Secretary of APMP
CONTENTS APMP GA 2008 EC/TCC/DEC 2009 MRA Success Stories APMP GA 2009 Dr. Woogab Lee, Executive Secretary of APMP Members of APMP, 2009 Kazakhstan Mongolia DPR Korea Russia Jordan Syria People s Republic
More informationAPMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010
APMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010 The CIPM global mutual recognition arrangement (global MRA) requires national metrology institutes (NMIs) to have in place
More informationTR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By:
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL LF METROLOGY Approved By: Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of Approval: 2015-08-26 Date of
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 THE MODAL SHOP, INC. A PCB GROUP COMPANY 3149 E. Kemper Road Cincinnati OH 45241 Lisa Moore Phone: 513 351-9919 CALIBRATION Valid To:
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh
More informationILAC input to CIPM MRA Review Workshop October 2015
ILAC input to CIPM MRA Review Workshop 13-14 October 2015 BIPM Sevres 13 October 2015 By Erik Oehlenschlaeger ILAC (DANAK) ILAC History ILAC first started as a conference in 1977 (Copenhagen) with the
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JAPAN QUALITY ASSURANCE ORGANIZATION Kyushu testing office 2-33, Miyanojin 3-Chome, Kurume-shi, Fukuoka, 839-0801 Japan Masaya Ishimaru Phone: 81 942 48 7763
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 BRUEL AND KJAER North American Service Center Calibration Laboratory 3079 Premiere Parkway Suite 120 Duluth, GA 30097 William Shipman
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Measurement House Contact: Mr David Gray Kingsway Tel: +44 (0)1792 588722 Fforestfach Fax: +44 (0)1792 582624 Swansea E-Mail: mail@haven.co.uk
More informationInternationally accepted framework for metrology
Internationally accepted framework for metrology Andy Henson BIPM Working Groups The BIPM Bureau International des Poids et Measures the intergovernmental organization through which Member States act together
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Vietnam LTD.
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Avionic and Metrology Centre Unit G1/2 Treforest Industrial Estate Pontypridd CF37 5YL Contact: Mr P Ashurst Tel: +44 (0)1443 849970 Fax:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 MTS METROLOGY AND CALIBRATION LABORATORY 14000 Technology Drive Eden Prairie, MN 55344 Kevin Rust Phone: 952 937 4790 www.mts.com CALIBRATION
More informationScope of Accreditation For Alliance Calibration. Calibration
Scope of Accreditation For Alliance 11402 Reading Road Cincinnati, OH 45241 Sidney Taylor 513-769-1200 In recognition of a successful assessment to ISO/IEC 17025:2005 to the following and Measurement Capabilities,
More informationThe Physikalisch-Technische Bundesanstalt,
Physikalisch-Technische Bundesanstalt the National Metrology Institute of Germany The Physikalisch-Technische Bundesanstalt, Germany snational metrologyinstitute, isa scientific and technical higher federal
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Quad State Gauging and Measurement, Inc. (Hereinafter
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 DIGITAL MEASUREMENT METROLOGY INC. (A TRESCAL COMPANY) 26 Automatic Road, Unit 4 Brampton, Ontario, CANADA L6S 5N7 Nana Mantey Phone:
More informationSMD ENS Metrology - National Standards. Short overview. Hugo Pirée. World Metrology Day 2018 Brussels.
SMD ENS Metrology - National Standards Short overview Hugo Pirée World Metrology Day 2018 Brussels Federal government FPS ECONOMY Gen. Direction QUALITY & SAFETY Division METROLOGY 14 persons National
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Los Angeles 1503 E. Orangethorpe
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation has assessed the Laboratory of: Rays Precision Calibration, Inc 881-3 Nandino Blvd., Lexington, KY 40511 (Hereinafter called the
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: 0 (Hereinafter called the Organization) and hereby
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 MEGGITT (ORANGE COUNTY), INC. 14600 Myford Road Irvine, CA 92606 Gil Gonzalez Phone: 949 493 8181 CALIBRATION Valid To: September 30,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
72 Manchester Road Kearsley Bolton BL4 8NZ Contact: Mr A Leonard Tel: +44 (0) 1204 571499 Fax: +44 (0) 1204 571734 E-Mail: enquiries@airflowmeasurements.com Website: www.airflowmeasurements.com AIR VELOCITY
More informationTECHNICAL PROTOCOL FOR REGIONAL SUPPLEMENTARY COMPARISON APMP.AUV.A-S1
TECHNICAL PROTOCOL FOR REGIONAL SUPPLEMENTARY COMPARISON APMP.AUV.A-S1 August 14, 2008 National Institute of Metrology (Thailand) (NIMT) Page 1 of 9 Preface It was agreed during the 8 th APMP TCAUV meeting
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PRESSURE Hydraulic Pressure (Gauge) Hewett Road Gapton Hall Industrial Estate Great Yarmouth Norfolk NR31 0NN Contact: Mr J Gunn Tel: +44
More informationTHE PAST, THE PRESENT AND
THE PAST, THE PRESENT AND THE FUTURE OF KRISS June 09, 2016 Bangkok, Thailand APMP Mid-year Meeting JOOKEUN PARK CONTENTS I. INTRODUCTION II. KRISS OVER THE LAST 40 YEARS 1) EARLY STAGE (1970S~1980S) 2)
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Denver 3521 Lewiston St, Suite 12
More informationThe Importance of Global Metrology for Standards, Industry and Trade: Metrology in a Dynamic World
The Importance of Global Metrology for Standards, Industry and Trade: Metrology in a Dynamic World v1 Dr Martin J.T. Milton Director of the BIPM Riyadh and Jeddah 18 and 19 May 2016 The importance of global
More informationPRACTICAL EXPERIENCE OF THE CIPM MRA - THE VIEW FROM AN NMI USER
XVIII IMEKO WORLD CONGRESS Metrology for a Sustainable Development September, 17 22, 2006, Rio de Janeiro, Brazil PRACTICAL EXPERIENCE OF THE CIPM MRA - THE VIEW FROM AN NMI USER Fiona Redgrave National
More informationDesignated Institutes participating in the CIPM MRA
Designated Institutes participating in the CIPM MRA Expectations and nomination form Version 1.2 Contents 1. Introduction... 1 2. Designated Institute in Appendix A of the KCDB... 2 2.1. Designation of
More informationTechnical capabilities of military calibration laboratories
Technical capabilities of military calibration laboratories Measurement domain Measuring range Measurement Remarks 3 ACCELERATION, VELOCITY AND DISTANCE Acceleration of Vibration - sensitivity (0,1 1000
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI-NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI-NCSLI Z540-1-1994 QUALITY CALIBRATION SERVICE, INC. 5515 S Westridge Dr. New Berlin, WI 53151 Martin Lukomski Phone: 414 256 8900 CALIBRATION Valid To:
More informationUN Countries in the Flyway Partner Ramsar
AIM OF THE REGIONAL INITIATIVE 1. How is it implementing the Ramsar approach? Describe briefly the operational means of your initiative to promote the objectives of the Convention and how your initiative
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453 8003 CALIBRATION Valid To: March 31, 2019 Certificate
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Charlotte 8334 Arrowridge Blvd.,
More informationPilot Study EURAMET.AUV.V-P1: Bilateral comparison on magnitude of the complex charge sensitivity of accelerometers from 10 Hz to 10 khz
Pilot Study EURAMET.AUV.V-P1: Bilateral comparison on magnitude of the complex charge sensitivity of accelerometers from 10 Hz to 10 khz 1) Pilot laboratory: Laboratoire national de métrologie et d'essais
More informationBilateral Comparison EURAMET.AUV.V-K1.2. (vibration acceleration) Swiss Federal Office of Metrology METAS Christian Hof
Final report 2011 04 20 Bilateral Comparison EURAMET.AUV.V-K1.2 (vibration acceleration) Swiss Federal Office of Metrology METAS Christian Hof Abstract This report describes the results obtained in a bilateral
More informationCERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration 5909 Breckenridge
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México C.P. 88787 0 (Hereinafter
More informationMEASUREMENT UNITS STANDARDS AND SERVICES DEPARTMENT(MUSSD) SRI LANKA
COUNTRY REPORT: MEASUREMENT UNITS STANDARDS AND SERVICES DEPARTMENT(MUSSD) SRI LANKA PRESENTED BY: R.G.S.ANURADHA. PERERA SRI LANKA Government type: Democratic Socialist Republic Location: South Asia,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 &ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 &ANSI/NCSL Z540-1-1994 CIH EQUIPMENT COMPANY, INC. 1806 South Highland Ave Clearwater, FL 33756-1762 Dr. David Silver Phone: 727 584 5063 Email: dsilver@cihequipment.com
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RS CALIBRATION SERVICES, INC. 1047 Serpentine Lane Pleasanton, CA 94566 Mr. Ralph Sabiel Phone: 925 462 4217 CALIBRATION Valid To: April
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INCO-LABS Plot No. 151, Block No.1 Street No. 101 North Subhan, Safat, Kuwait 13071 Abdulaziz A. Al-Obaidan Phone: 00965-2475 2330 CALIBRATION Valid To: December
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that Productivity Quality, Inc./Advanced Inspection Services, LLC 15150
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationButler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C
Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland Calibration Laboratory Registration number: 256C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precisión Calibration de Mexico S.
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Southern Calibration oratories Limited Issue No: 038 Issue date: 26 January 2018 Unit 7 Solent Industrial Estate Hedge End Southampton SO30
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 3000 Northwoods
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453-8003 CALIBRATION Valid To: July 31, 2017 Certificate
More informationThis annex is valid from: to Replaces annex dated:
Premises: (Son) & Nijmegen LF 0 0 DC/LF Quantities LF 1 0 DC Voltage measuring and generating 10 V 5 10-7 U zenerreferences 1 V and 1.018 V 2.3 10-6 U zenerreferences 0 V to 10 V 0.3 V 10 V to 200 mv 3
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INTERNATIONAL CERTIFICATION MEASUREMENTS, INC. (SUBSIDIARY OF LEADER CORPORATION) 51644 Filomena Dr. Shelby Township, MI 48315 Brenda
More informationDEC Workshop on Participation in Co-ordinated Universal Time
Report (Philippines) DEC Workshop on Participation in Co-ordinated Universal Time 6 7 November 2014 NIM, Beijing, China Sabino Paulo B. Leones, Jr. National Metrology Laboratory (NML) Industrial Technology
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México C.P. 88787 0 (Hereinafter
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 CONSUMERS ENERGY/LABORATORY SERVICES Laboratory Services 135 West Trail Street Jackson, MI 49201 Nick Serafin Phone: 517 788 2238 naserafin@cmsenergy.com
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Cal Tec Process Management, LLC 1400 Grange
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENDRESS+HAUSER, INC. 10057 Porter Road Suite 100 LaPorte, TX 77571 Helmut Grohnert Phone: 317 535 1350 CALIBRATION Valid To: September
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México. C.P. 88787 0 (Hereinafter
More informationButler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C
Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland Calibration Laboratory Registration number: 256C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHSTAR CALIBRATION, INC. 1045 26th Place NW Owatonna, MN 55060 John Moorhouse Phone: 507 444 9111 CALIBRATION Valid To: February 29, 2020 Certificate Number:
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JOHNSON GAGE AND INSPECTION 5920 W. 21st Street North Wichita, KS 67205 Scott Porter Phone: 316-943-7532 CALIBRATION Valid To: May 31,
More informationFrom the JUSTSAP to the PISA
From the JUSTSAP to the PISA Osamu Odawara, Tokyo Institute of Technology Japan-US Science, Technology, and Space Application Program Pacific International Space Alliance JUSTSAP ( established in 1990
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INCAL TECHNOLOGIES, INC. 3870 E. Washington Road Saginaw, MI 48601 Rob VanBuskirk Phone: 989 758 0950 CALIBRATION Valid To: May 31,
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Guadalupe Nuevo León, México C.P. 67160 (Hereinafter
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: December
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 WEST CALDWELL CALIBRATION LABORATORIES, INC. 1575 State Route 96 Victor, NY 14564 Felix Christopher Phone: 585 586 3900 CALIBRATION
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APTIV CONTRACT SERVICES. S. DE R. L. DE C. V. CALIBRATION LAB Mexico Technical Center Ave. Hermanos Escobar #5756 Cd. Juarez, Chihuahua C.P. 32310, Mexico Ricardo
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 INDUSTRIAL PROCESS MEASUREMENT, INC. 3910 Park Avenue, Unit 7 Edison, NJ 08820 Mark Gural Phone: 732 632 6400 www.instrumentation2000.com
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 8 New Vision Business Park Glascoed Road St Asaph LL17 0LP Contact: Mr Alan Horner Tel: +44 (0)1492 550 398 E-Mail: alan.horner@mcs-testequipment.com
More informationEMC TEST REPORT for LEDELS LIGHTING CO., LTD. LED module Model No. : LL-F12T4815X6B
Page 1 of 27 Report No. R011412016E-1 EMC TEST REPORT for LEDELS LIGHTING CO., LTD LED module Model No. : LL-F12T4815X6B Prepared for : LEDELS LIGHTING CO., LTD Address : 5F, Block C, Mingjinhai Ind. Park,
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Bldg#660 King Abdullah Road, Al Waha District, Riyadh,
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationProduct and Measurement Solutions for the Automotive Industry
Product and Measurement Solutions for the Automotive Industry Car body and vehicle related measurement solutions P.4-5 Acceleration noise measurement Acceleration Noise Measurement System Measurement of
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
1 Wilson Street Contact: Mr Ibrahim Ibrahim Thornaby Tel: +44 (0) 1642 626148 Stockton-On-Tees Fax: +44 (0) 870 143 1869 TS17 7AR E-Mail: ibrahim@calibrate.co.uk United Kingdom Website: www.calibrate.co.uk
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 SIMCO SCIENTIFIC INSTRUMENT REPAIR AND CALIBRATION SERVICES CO., LTD. Flat 404 North Software Tower, NanSha IT Park Panyu NanSha, Guangzhou,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TRANE LA CROSSE METROLOGY LAB 2313 20th Street South La Crosse, WI 54601 Rick McKenzie Phone: 608 787 4032 CALIBRATION Valid To: October
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TRESCAL, INC. 1125 North Corporate Drive, Suite 207-A Mobile, AL 36607 Sergey Pasechnikov Phone: 251-461-6609
More information