Internationally accepted framework for metrology
|
|
- Tamsyn Griffin
- 6 years ago
- Views:
Transcription
1 Internationally accepted framework for metrology Andy Henson BIPM
2 Working Groups The BIPM Bureau International des Poids et Measures the intergovernmental organization through which Member States act together on matters related to measurement science and measurement. Established in 1875 when 17 States signed the Metre Convention. Currently there are 58 Member States of the BIPM, and 41 Associates of the General Conference. CGPM Conférence Générale des Poids et Mesures Official representatives of Member States. CIPM Comité International des Poids et Mesures Eighteen individuals of different nationalities elected by the CGPM. BIPM Bureau International des Poids and Mesures representing the worldwide measurement community centre for scientific and technical collaboration coordinator of the worldwide measurement system Consultative Committees (CCs) CCAUV Acoustics, US & Vibration CCEM Electricity & Magnetism CCL Length CCM Mass and related CCPR Photometry & Radiometry CCQM Amount of substance CCRI Ionizing Radiation CCT Thermometry CCTF Time & Frequency CCU - Units Membership of the BIPM provides states with the opportunity To gain global recognition and acceptance for measurement capabilities (CIPM MRA) To participate in the structures that support and develop the SI To be active in scientific and technical forums that support the development of measurement capability 2
3 Global Quality Infrastructure National Standards Body certification body required for certification accreditation body certification bodies certification inspection body National Accreditation Body inspection bodies definition of units (as required in ) inspection certificate testing laboratory ENTERPRISES testing laboratories test report National Metrology Institute calibration certificate required for laboratory accreditation calibration laboratory calibration laboratories calibration certificate Enhanced product quality and compatibility Enhanced safety and health Decreased environmental impact Increased trade opportunities Facilitating innovations to the market place Metrology is a key part of the global quality infrastructure that underpins world trade. The work of the NMIs is made visible and transparent through the CIPM-MRA signed in 1999, which, provides the technical basis for the worldwide acceptance of national measurement and calibration and measurement certificates from NMIs. BENEFITS Source: World Bank AUTHORITIES, CONSUMERS, AND GENERAL PUBLIC The work of the CIPM MRA now goes far beyond matters of trade to cover climate change, healthcare etc. 3
4 The CIPM Mutual Recognition Arrangement Objectives: to establish the degree of equivalence of national measurement maintained by NMIs to provide for the mutual recognition of calibration and measurement certificates issued by NMIs Participation 98 National Metrology Institutes 57 Member States 41 Associates 4 International organizations (ESA, IAEA, IRMM, WMO) plus 156 Designated Institutes Total: 258 Institutes Science based, peer reviewed, public data 4
5 Joint BIPM, OIML, ILAC and ISO declaration on measurement traceability 5
6 Joint BIPM, OIML, ILAC and ISO declaration on measurement traceability The BIPM, OIML, ILAC, and ISO endorse the following recommendations: in order to be able to rely on their international acceptability, calibrations should be performed in National Metrology Institutes who should normally be signatories to the CIPM MRA and have CMCs published in the relevant areas of the KCDB or in laboratories accredited by accreditation bodies which are signatories to the ILAC Arrangement; measurement uncertainty should follow the principles established in the GUM; the results of the measurements made in accredited laboratories should be traceable to the SI; NMIs providing traceability for accredited laboratories should normally be signatories to the CIPM MRA and have CMCs published in the relevant areas of the KCDB; within the OIML s MAA, accreditation should be provided by bodies which are signatories to the ILAC Arrangement and the above policies on traceability to the SI should be followed; The above principles should be used whenever there is a need to demonstrate metrological traceability for international acceptability. Use of this Declaration These principles underpin a world measurement system which provides a robust, internationally accepted framework within which users can have confidence in the validity and acceptability of measurements results. BIPM, OIML, ILAC and ISO strongly urge legislators and regulators to refer to the Arrangements described earlier in this Declaration and also to accept measurement results made within this system, thereby helping avoid technical barriers to trade. We also invite interested parties to endorse these principles and to make use of them in their own work. Option 1) from ILAC P10:01/2013 An NMI whose service is suitable for the intended need and is covered by the CIPM MRA. Services covered by the CIPM MRA can be viewed in Appendix C of the BIPM KCDB which includes the range and uncertainty for each listed service. Traceability can be taken directly from the NMIs, but often is implicit by calling up accredited laboratory services ( 6
7 CIPM MRA: Good regulatory practice Federal Aviation Administration accepts CIPM MRA for aircraft repair and inspection procedures The CIPM Mutual Recognition Arrangement (MRA) signatories are acceptable to the FAA Source: 7
8 Effective regulation and regulatory compliance depends on getting the measurements right wherever they are made! Thank you Andy Henson
The Importance of Global Metrology for Standards, Industry and Trade: Metrology in a Dynamic World
The Importance of Global Metrology for Standards, Industry and Trade: Metrology in a Dynamic World v1 Dr Martin J.T. Milton Director of the BIPM Riyadh and Jeddah 18 and 19 May 2016 The importance of global
More informationBureau International des Poids et Mesures. International Recognition of NMI Calibration and Measurement Capabilities: The CIPM MRA
Bureau International des Poids et Mesures International Recognition of NMI Calibration and Measurement Capabilities: The CIPM MRA Prof. Michael Kühne International School of Physics Enrico Fermi Metrology
More informationJoint ILAC CIPM Communication regarding the. Accreditation of Calibration and Measurement Services. of National Metrology Institutes.
Joint ILAC CIPM Communication regarding the Accreditation of Calibration and Measurement Services of National Metrology Institutes 7 March 2012 Authorship This document was prepared by the International
More informationCIPM and CCPR What are these organizations and how do they affect my testing results. Maria Nadal Photometry, Surface Color and Appearance NIST
CIPM and CCPR What are these organizations and how do they affect my testing results Maria Nadal Photometry, Surface Color and Appearance NIST CIE USA Annual Meeting October 6-7, 2014 Calibration Laboratory
More informationMetrology at the service of the economy, society and citizens
Bureau International des Poids et Mesures Metrology at the service of the economy, society and citizens Dr Martin Milton Director, BIPM 26 th Sept 2013 Bureau International des Poids et Mesures Established
More informationILAC input to CIPM MRA Review Workshop October 2015
ILAC input to CIPM MRA Review Workshop 13-14 October 2015 BIPM Sevres 13 October 2015 By Erik Oehlenschlaeger ILAC (DANAK) ILAC History ILAC first started as a conference in 1977 (Copenhagen) with the
More informationBIPM Report to the AFRIMETS General Assembly. Andy Henson Director of International Liaison and Communications
BIPM Report to the AFRIMETS General Assembly Andy Henson Director of International Liaison and Communications Towards a new SI New data published in the latest edition of Metrologia. CCM At least 3 experiments,
More informationDesignated Institutes participating in the CIPM MRA
Designated Institutes participating in the CIPM MRA Expectations and nomination form Version 1.2 Contents 1. Introduction... 1 2. Designated Institute in Appendix A of the KCDB... 2 2.1. Designation of
More informationBUREAU INTERNATIONAL DES POIDS ET MESURES THE CIPM MRA: PAST, PRESENT AND FUTURE
Rapport BIPM-2015/01 BUREAU INTERNATIONAL DES POIDS ET MESURES THE CIPM MRA: PAST, PRESENT AND FUTURE A. Henson 2015 Pavillon de Breteuil, F-92312 SÈVRES Cedex, France The CIPM MRA: Past, present and future
More informationPRACTICAL EXPERIENCE OF THE CIPM MRA - THE VIEW FROM AN NMI USER
XVIII IMEKO WORLD CONGRESS Metrology for a Sustainable Development September, 17 22, 2006, Rio de Janeiro, Brazil PRACTICAL EXPERIENCE OF THE CIPM MRA - THE VIEW FROM AN NMI USER Fiona Redgrave National
More informationCER-ASEAN Integration Partnership Forum. CER-ASEAN participation in global frameworks for international recognition and harmonisation of measurement
CER-ASEAN Integration Partnership Forum CER-ASEAN participation in global frameworks for international recognition and harmonisation of measurement Dr Angela Samuel Director, International Relations Mr
More informationBorderline between CIPM MRA and testing activities
Borderline between CIPM MRA and testing activities Michela Sega, EURAMET TC-MC Chair INRIM-Italy 7 th Meeting of the Focus Group on Facilitating National Metrology Infrastructure Development Zagreb, Croatia,
More informationProgress towards the revision of the SI. Estefanía de Mirandés CCU executive secretary BIPM
Progress towards the revision of the SI Estefanía de Mirandés CCU executive secretary BIPM Special 2017 CODATA adjustment of h, e, k and N A Resolution 1 of the 24th CGPM (2011) : The General Conference
More informationVersion 1.1 (01/2015) EURAMET e.v. Bundesallee 100 D Braunschweig Germany. Phone:
Authorship and Imprint This document was developed by the EURAMET e.v. Authors: W. Schmid (EURAMET), M. Sega (INRIM, Italy, EURAMET TC-MC Chair), J. Drnovsek (MIRS/UL-FE/LMK, Slovenia, EURAMET Vice-Chairperson
More informationReport of the 21st Meeting of the JCRB. Held on September 2008 at the BIPM, Sèvres
Report of the 21st Meeting of the JCRB Held on 24-25 September 2008 at the BIPM, Sèvres Item Page 1. Welcome by the Chairman and changes to the Agenda... 3 2. Approval of the minutes and discussion on
More informationReview of the Operation and Implementation of the CIPM MRA
Review of the Operation and Implementation of the CIPM MRA 13 th and 14 th October 2015 Participation in the CIPM MRA today The BIPM in 2015 57 Member States 40 Associate States and Economies 100 CIPM
More informationThe CIPM MRA: Why was it needed and how did we persuade Directors of NMIs to sign it?
The CIPM MRA: Why was it needed and how did we persuade Directors of NMIs to sign it? Terry Quinn Director of the BIPM 1988-2003 Deputy Director 1978-1988 Oxford English Dictionary definition of persuade:
More informationNew signatories of the CIPM MRA
Dear Reader, Welcome to the eighth KCDB Newsletter. Panama's experience presenting QS and submitting CMCs by Dr Hernando J. Florez, Director of Centro Nacional de Metrología de Panamá, CENAMEP. New signatories
More informationAFRIMETS and the CIPM MRA. Presented by: Dr Wynand Louw CIPM Member
AFRIMETS and the CIPM MRA Presented by: Dr Wynand Louw CIPM Member the structure Principal Member Ordinary Member Associate Member Observer Sub-regional African Metrology Organisation Industrial Metrology
More information33 rd Asia Pacific Metrology Programme General Assembly 30 November 1 December 2017 New Delhi, India
33 rd Asia Pacific Metrology Programme General Assembly 30 November 1 December 2017 New Delhi, India Laboratory Report National Metrology Institute of Japan (NMIJ) National Institute of Advanced Industrial
More informationReport of the President of the CIPM on the work accomplished since the 24th meeting of the CGPM
Report of the President of the CIPM on the work accomplished since the 24th meeting of the CGPM November 2014 2 CIPM President s Report In accordance with the Metre Convention it is my pleasure to report
More informationSMD ENS Metrology - National Standards. Short overview. Hugo Pirée. World Metrology Day 2018 Brussels.
SMD ENS Metrology - National Standards Short overview Hugo Pirée World Metrology Day 2018 Brussels Federal government FPS ECONOMY Gen. Direction QUALITY & SAFETY Division METROLOGY 14 persons National
More informationReport of the President of the CIPM on the work accomplished since the 25th meeting of the CGPM
Report of the President of the CIPM on the work accomplished since the 25th meeting of the CGPM November 2018 2 CIPM President's Report Report by the President of CIPM Highlights of work accomplished since
More informationThe cost and benefits of the CIPM MRA to the NMIs of the world: the Brazilian experience
The cost and benefits of the CIPM MRA to the NMIs of the world: the Brazilian experience João Alziro Herz da Jornada President of Inmetro- Brazil Costs and Benefits of the CIPM MRA, as perceived by Inmetro-
More informationCIPM MRA Best Practice in Korea (1)
September 2015 CIPM MRA Best Practice in Korea (1) DSME BP, USA (2002) DSME : Daewoo Shipbuilding & Marine Engineering, Co. Offshore plant order by BP, USA. Calibration traceable to NIST required. Since
More informationAPMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010
APMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010 The CIPM global mutual recognition arrangement (global MRA) requires national metrology institutes (NMIs) to have in place
More informationTraceability measurement results of accurate time and frequency in Bosnia and Herzegovina
INFOTEH-JAHORINA Vol. 11, March 2012. Traceability measurement results of accurate time and frequency in Bosnia and Herzegovina Osman Šibonjić, Vladimir Milojević, Fatima Spahić Institute of Metrology
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
DC RESISTANCE Unit 4 Riverside Business Centre Walnut Tree Close Guildford Surrey GU1 4UG Contact: Ian Norman Tel: +44 (0)1483 302700 Fax: +44 (0)1483 300562 E-Mail: inorman@caltest.co.uk Website: www.caltest.co.uk
More informationTR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By:
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL LF METROLOGY Approved By: Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of Approval: 2015-08-26 Date of
More informationWMO-BIPM Workshop on Measurement Challenges for Global Observation Systems for Climate Change Monitoring: Traceability, Stability and Uncertainty
The BIPM key comparison database Newsletter No 13 June 2010 Dear Reader, Welcome to the 13th KCDB Newsletter. In this issue we highlight some updates related to the CIPM MRA, the JCRB, the content of the
More informationNdwakhulu Mukhufhi CEO
Ndwakhulu Mukhufhi CEO Outline of Talk Africa Continent of Wonders (+ve & ve) Challenges in Emerging Economies The Intra African System of Metrology The CIPM MRA in Africa What is Needed to grow Metrology?
More informationDr. Takashi Usuda (NMIJ), CCAUV President Dr. Gianna Panfilo (BIPM), Secretary
CCAUV/17-46 Dr. Takashi Usuda (NMIJ), CCAUV President Dr. Gianna Panfilo (BIPM), Secretary Strategic Planning Working Group (SPWG) Dr. Michael Gaitan (NIST), Chairperson Dr. Salvador Figueroa (DFM), Co-Chair
More informationPROMOTING QUALITY AND STANDARDS
PROMOTING QUALITY AND STANDARDS 1 PROMOTING QUALITY AND STANDARDS Strengthen capacities of national and regional quality systems (i.e. metrology, standardization and accreditation) Build conformity assessment
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 8 New Vision Business Park Glascoed Road St Asaph LL17 0LP Contact: Mr Alan Horner Tel: +44 (0)1492 550 398 E-Mail: alan.horner@mcs-testequipment.com
More informationCertificate of Calibration
Certificate of Calibration ISO/IEC 17025:2005 Certificate Number 1-5607144213-1 Model Number Manufacturer Description Serial Number 34401A Keysight Technologies Inc Digital multimeter, 6.5 digit MY41007563
More informationReport of the 32 nd Meeting of the JCRB Held on March 26-27, 2014 BIPM, Sevres. Participants... 2
Report of the 32 nd Meeting of the JCRB Held on March 26-27, 2014 BIPM, Sevres Item Page Participants... 2 1. Welcome by the Chairman and approval of the agenda... 3 2. Approval of the minutes of the 31
More informationGlobal MRA and Traceability. Time and Frequency area
Global MRA and Traceability Time and Frequency area Contents MRA Objectives, Process, Outcome, and so on Traceability of Time & Frequency Key comparisons Quality system Accepting a quality system CIPM
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Measurement House Contact: Mr David Gray Kingsway Tel: +44 (0)1792 588722 Fforestfach Fax: +44 (0)1792 582624 Swansea E-Mail: mail@haven.co.uk
More informationCertificate of Calibration
Certificate of Calibration ISO/IEC 17025:2005 and ANSI/NCSL Z540.1-1994 Model Number Manufacturer Description Serial Number Customer Asset No. 11667A Keysight Technologies Inc DC-18 GHz power splitter,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
72 Manchester Road Kearsley Bolton BL4 8NZ Contact: Mr A Leonard Tel: +44 (0) 1204 571499 Fax: +44 (0) 1204 571734 E-Mail: enquiries@airflowmeasurements.com Website: www.airflowmeasurements.com AIR VELOCITY
More informationREPORT ON THE TWENTIETH MEETING OF THE JCRB
REPORT ON THE TWENTIETH MEETING OF THE JCRB Held on 1-2 May 2008, in Wellington, New Zealand Item Participants...3 Delegations...3 Guests 3 1. Welcome by the Chairman and changes to the Agenda...4 2. Report
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Standards & Calibration Laboratory Contact: Mr Martin Matthews Archcliffe Road Tel: +44 (0)1304 502121 Dover Fax: +44 (0)1304 502268 Kent
More informationDEC Country Report. National Institute of Metrology (Thailand) By Mr.Pairoj Rattanangkul
National Institute of Metrology (Thailand) DEC Country Report By Mr.Pairoj Rattanangkul email : pairoj@nimt.or.th National Institute of Metrology (Thailand) 1 2 Table of Content Brief history of NIMT Where
More informationTerms of Reference for the Sub-committees and ad hoc Groups of the CIPM
Terms of Reference for the Sub-committees and ad hoc Groups of the CIPM June 2013 1 CIPM Sub-Committee for Strategy Terms of Reference Considering Recommendations 1 and 2 of the ad hoc Working Group, the
More informationThe Physikalisch-Technische Bundesanstalt,
Physikalisch-Technische Bundesanstalt the National Metrology Institute of Germany The Physikalisch-Technische Bundesanstalt, Germany snational metrologyinstitute, isa scientific and technical higher federal
More informationCRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF TIME AND FREQUENCY METROLOGY
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF TIME AND FREQUENCY METROLOGY Approved By: Chief Executive Officer: Ron Josias Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee
More informationMEASUREMENT UNITS STANDARDS AND SERVICES DEPARTMENT(MUSSD) SRI LANKA
COUNTRY REPORT: MEASUREMENT UNITS STANDARDS AND SERVICES DEPARTMENT(MUSSD) SRI LANKA PRESENTED BY: R.G.S.ANURADHA. PERERA SRI LANKA Government type: Democratic Socialist Republic Location: South Asia,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Babcock International Group PC1409, Devonport Royal Dockyard Plymouth Devon PL1 4SG Contact: Mr C Burrow Tel: +44 (0)1752 324739 Fax: +44
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 3, Watt House Innovation Centre Pensnett Estate Kingswinford West Midlands DY6 7YD Contact: Mr A P Walker Tel: +44 (0)1384 401132 Fax: +44 (0)1384 400754 E-Mail: mail@quasartronics.com Website: www.quasartronics.com
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
CET Structures Ltd. trading as CET Calibration M1 Commerce Park Markham Lane Duckmanton Chesterfield S44 5HS Contact: Mr Chris Locke Tel: +44 (0)1246 828318 Fax: +44 (0)1246 828319 E-Mail: chris.locke@cetcalibration.com
More informationHistory of SI Base Units
History of SI Base Units The creation of the decimal Metric System at the time of the French Revolution and the subsequent deposition of two platinum standards representing the metre and the kilogram,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 THE MODAL SHOP, INC. A PCB GROUP COMPANY 3149 E. Kemper Road Cincinnati OH 45241 Lisa Moore Phone: 513 351-9919 CALIBRATION Valid To:
More informationContinuous development of the national standard for vibration
Continuous development of the national standard for vibration by Ian Veldman, National Metrology Laboratory, CSIR In this fast technologically-advancing world, higher measurement accuracy is part of the
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
1 Wilson Street Contact: Mr Ibrahim Ibrahim Thornaby Tel: +44 (0) 1642 626148 Stockton-On-Tees Fax: +44 (0) 870 143 1869 TS17 7AR E-Mail: ibrahim@calibrate.co.uk United Kingdom Website: www.calibrate.co.uk
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
code Location code Customers Sites 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Yussof Taha Tel: +673-2-386475
More informationComparison of squareness measurements
Slovenský metrologický ústav Slovak Institute of Metrology Slowakisches Institut für Metrologie EUROMET Supplementary Comparison #910 Comparison of squareness measurements Final Report Jiri Mokros, SMU,
More informationMedical Technology Association of NZ. Proposed European Union/New Zealand Free Trade Agreement. Submission to Ministry of Foreign Affairs & Trade
Medical Technology Association of NZ Proposed European Union/New Zealand Free Trade Agreement Submission to Ministry of Foreign Affairs & Trade February 2016 1 Introduction The Medical Technology Association
More informationSTATUS REPORT OF TIME AND FREQUENCY LAB. (VIETNAM METROLOGY INSTITUTE)
STATUS REPORT OF TIME AND FREQUENCY LAB. (VIETNAM METROLOGY INSTITUTE) Trieu Viet Phuong Head of Time and Frequency Laboratory, VMI Email: phuongtv@vmi.gov.vn DA NANG 11-2016 About TFL Laboratory of time
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that Kanawha Scales and Systems, Inc. 26 Whitney Drive Milford, OH 45150
More informationValidation of primary hydrophone calibrations by inter-laboratory comparisons and by independent calibration methods
Validation of primary hydrophone calibrations by inter-laboratory comparisons and by independent calibration methods S. P Robinson and P. D Theobald National Physical Laboratory, ampton Road, TW11 OLW
More informationEURO-ASIAN COOPERATION OF NATIONAL METROLOGICAL INSTITUTIONS (COOMET)
ЕВРО-АЗИАТСКОЕ СОТРУДНИЧЕСТВО ГОСУДАРСТВЕННЫХ МЕТРОЛОГИЧЕСКИХ УЧРЕЖДЕНИЙ (KOOMET) EURO-ASIAN COOPERATION OF NATIONAL METROLOGICAL INSTITUTIONS (COOMET) Federal State Unitary Enterprise «Russian Metrological
More informationNational Measurement System Programme Strategies. Engineering. Version 8 th July 2014
National Measurement System Programme Strategies Engineering Version 8 th July 2014 1. Introduction This Programme is an NMS Knowledge Base Programme, which underpins measurements of Temperature, Humidity,
More informationBuenos Aires Action Plan
STUDY GROUP 2 QUESTION 4/2 Assistance to developing countries 1 for implementing conformance and interoperability programmes and combating counterfeit information and communication technology equipment
More informationInternational Committee for Weights and Measures Proceedings of the 106th meeting
International Committee for Weights and Measures Proceedings of the 106th meeting (16-17 and 20 October 2017) 2 106th meeting of the CIPM Executive Summary The 106th meeting of the CIPM (16-17 and 20 October
More informationCOOMET Pilot Comparison 473/RU-a/09: Comparison of hydrophone calibrations in the frequency range 250 Hz to 200 khz
COOMET Pilot Comparison 473/RU-a/09: Comparison of hydrophone calibrations in the frequency range 250 Hz to 200 khz Chen Yi 1, A E Isaev 2, Wang Yuebing 1, A M Enyakov 2, Fei Teng 1 and A N Matveev 2 1
More informationTHE PAST, THE PRESENT AND
THE PAST, THE PRESENT AND THE FUTURE OF KRISS June 09, 2016 Bangkok, Thailand APMP Mid-year Meeting JOOKEUN PARK CONTENTS I. INTRODUCTION II. KRISS OVER THE LAST 40 YEARS 1) EARLY STAGE (1970S~1980S) 2)
More informationAbsolute frequency measurement of wavelength standards
Application Note METROLOGY Czech Metrology Institute (), Prague Menlo Systems, Martinsried Absolute frequency measurement of wavelength standards Authors: Petr Balling (), Benjamin Sprenger (Menlo Systems)
More informationBilateral Comparison EURAMET.AUV.V-K1.2. (vibration acceleration) Swiss Federal Office of Metrology METAS Christian Hof
Final report 2011 04 20 Bilateral Comparison EURAMET.AUV.V-K1.2 (vibration acceleration) Swiss Federal Office of Metrology METAS Christian Hof Abstract This report describes the results obtained in a bilateral
More informationTime and Frequency Laboratory Measurement Units, Standards. (National Metrology Institute) MUSSD-Sri Lanka
Time and Frequency Laboratory Measurement Units, Standards and Services Department (National Metrology Institute) MUSSD-Sri Lanka Introduction Measurement Units, Standards and Services Department (MUSSD
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ZETEC, INCORPORATED 875, boul. Charest ouest, Suite 100 Quebec, QC, G1N 2C9 CANADA
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZETEC, INCORPORATED 875, boul. Charest ouest, Suite 100 Quebec, QC, G1N 2C9 CANADA Ghislain Cournoyer, Systems Manufacturer & Services Manager Phone: 418 263
More informationConsultative Committee for Acoustics, Ultrasound and Vibration (CCAUV)
Consultative Committee for Acoustics, Ultrasound and Vibration (CCAUV) President: Prof. Dr Joaquín Valdés Executive Secretary: Dr Susanne Picard 1. Executive summary The CCAUV covers metrological aspects
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Advanced Technical Services NW, Inc. 8612
More informationMEASURING CONDITIONS AND UNCERTAINTIES FOR THE COMPARISON AND CALIBRATION OF NATIONAL DOSIMETRIC STANDARDS AT THE BIPM *
MEASURING CONDITIONS AND UNCERTAINTIES FOR THE COMPARISON AND CALIBRATION OF NATIONAL DOSIMETRIC STANDARDS AT THE BIPM * C. Kessler and D.T. Burns December 2018 BUREAU INTERNATIONAL DES POIDS ET MESURES
More informationOctober Myungsoo Kim President
October 2010 Myungsoo Kim President 1 2 Economic Growth of Korea from Wasteland - government s initiative of S&T for economy Government s Supports for Metrology and NMI 3 Overview of KRISS 4 5 Partnership
More informationto Measure is to Know but how to measure?
to Measure is to Know but how to measure? Gert Rietveld Nederlands Meetinstituut Delft GRietveld@NMi.nl VKRT meeting 8 Feb 2007-1 Nederlands Meetinstituut Legal inspection Testing and certification Scientific
More informationCONTENTS APMP GA 2008 EC/TCC/DEC 2009 MRA Success Stories APMP GA Dr. Woogab Lee, Executive Secretary of APMP
CONTENTS APMP GA 2008 EC/TCC/DEC 2009 MRA Success Stories APMP GA 2009 Dr. Woogab Lee, Executive Secretary of APMP Members of APMP, 2009 Kazakhstan Mongolia DPR Korea Russia Jordan Syria People s Republic
More informationRadiocommunication Study Group 7 DRAFT REVISION OF RECOMMENDATION ITU-R TF Standard-frequency and time-signal emissions
Radiocommunication Assembly (RA-12) Geneva, 16-20 January 2012 Subject: Question ITU-R 236/7 Document 7/1005-E 20 October 2011 Radiocommunication Study Group 7 DRAFT REVISION OF RECOMMENDATION ITU-R TF.460-6
More informationOptics and optical instruments Field procedures for testing geodetic and surveying instruments. Part 8:
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 17123-8 Second edition 2015-06-15 Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 8: GNSS field
More informationBureau International des Poids et Mesures Consultative Committee for Time and Frequency (CCTF)
Bureau International des Poids et Mesures Consultative Committee for Time and Frequency (CCTF) 14th Meeting (April 1999) Note on the use of the English text To make its work more widely accessible the
More informationFormat of S-parameter entries in CMC database
Format of S-parameter entries in CMC database M. Zeier, METAS 10.03.2015 CCEM GT-RF Meeting, BIPM 1 S-parameters Scattering parameters are fundamental quantities in RF & MW metrology. They are measured
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 &ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 &ANSI/NCSL Z540-1-1994 CIH EQUIPMENT COMPANY, INC. 1806 South Highland Ave Clearwater, FL 33756-1762 Dr. David Silver Phone: 727 584 5063 Email: dsilver@cihequipment.com
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Coherent LSM 27650 SW 95 th Avenue Wilsonville
More informationTHE NATIONAL MEASUREMENT STANDARDS AT CEM AND THEIR ROLE IN MRA AND EMRP PROJECTS. M. Neira
THE NATIONAL MEASUREMENT STANDARDS AT CEM AND THEIR ROLE IN MRA AND EMRP PROJECTS M. Neira CEM (Centro Español de Metrología), Tres Cantos, Spain, mneirar@cem.minetur.es Abstract- This paper presents a
More informationCertificate of Calibration No
Federal Department of Justice olice FDJP Federal Office of Metrology METAS Certificate of Calibration No 7-006 Object GPS rcvr type Septentrio PolaRx4TR PRO serial 005 Antenna type Aero AT-675 serial 500
More information19th Meeting of the Directors of NMIs and Member State Representatives with BIPM
19th Meeting of the Directors of NMIs and Member State Representatives with BIPM Session on Advanced Manufacturing, Digitization and Internet of Things Thursday, 19 th October 2017 11:10 to 13:00 Advanced
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK outhern Avenue Leominster Herefordshire HR6 0QH Contact: Dr N Wrigley Tel: +44 (0)1527 514015 Fax: +44 (0)1527 514016 E-Mail: nigel.wrigley@sercalcalibrations.co.uk
More informationIES LM TEST AND MEASUREMENT REPORT. For. Spectrum King LED Alabama Ave, #1 Canoga Park, CA Models: SK600+ Beast
IES LM-79-08 TEST AND MEASUREMENT REPORT For Spectrum King LED 7751 Alabama Ave, #1 Canoga Park, CA 91304 Report Type: Original Report Product Type: High Power LED Luminaire Test Engineer Thomas Tu Report
More informationVocabulaire international des termes de métrologie légale (VIML)
OIML TC 1 3CD Revision of OIML Vocabulary COMMITTEE DRAFT VIML2 3CD Date: 27 January 2011 Reference number: OIML/TC 1/N 20 Supersedes document: OIML/TC 1/N 16 OIML TC 1 Project p1 Title: International
More informationTrends in Metrology in Europe Philip Taylor
World Metrology Day, 20 th May 2009, Zagreb 1 Trends in Metrology in Europe Philip Taylor The EU Institutions World Metrology Day, 20 th May 2009, Zagreb 2 Court of Auditors Court of Justice The European
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Avionic and Metrology Centre Unit G1/2 Treforest Industrial Estate Pontypridd CF37 5YL Contact: Mr P Ashurst Tel: +44 (0)1443 849970 Fax:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZETEC, INCORPORATED 8226 Bracken Place SE, Suite 100 Snoqualmie, WA 98065 Scott Taylor, After Market Service Manager Phone: 425 974 2766 CALIBRATION Valid To:
More informationINTERNATIONAL OIML R 103 RECOMMENDATION
INTERNATIONAL OIML R 103 RECOMMENDATION Edition 1992 (E) Measuring instrumentation for human response to vibration (with reference to International Standards 8041 and 5347 of the International Organization
More informationTitle: Improving the Inter-American Metrology System towards the Free Trade Area of the Americas
In this page the interested people will find information about projects already accomplished or in process in the scope of the SIM. Technical Cooperation Profile Regional April 18th, 2001 I. BASIC PROJECT
More informationAFRIMETS. Legal Metrology School ENSURING QUALITY AND CREDIBILITY OF MEASUREMENTS USED IN REGULATIONS HAMMAMET, TUNISIA 8-17 OCTOBER 2014
AFRIMETS HAMMAMET, TUNISIA 8-17 OCTOBER 2014 2014 Legal Metrology School ENSURING QUALITY AND CREDIBILITY OF MEASUREMENTS USED IN REGULATIONS TBT PROGRAMME OVERCOMING TECHNICAL BARRIERS TO TRADE CONTENT
More informationFinal Report Key Comparison COOMET.EM.BIPM-K10.b. Comparison of the 10 V Josephson Voltage Standards COOMET 542/RU/11. A.S. Katkov 1, P.A.
Final Report Key Comparison COOMET.EM.BIPM-K10.b Comparison of the 10 V Josephson Voltage Standards COOMET 54/RU/11 A.S. Katkov 1, P.A.Chernyaev 1 D.I.Mendeleyev Institute for Metrology (VNIIM), Moskovsky
More informationComité consultatif d électricité (CCE) Consultative Committee for Electricity (CCE)
Comité consultatif d électricité (CCE) Consultative Committee for Electricity (CCE) Rapport de la 21 e session (juin 1997) Report of the 21st Meeting (June 1997) Bureau international des poids et mesures
More informationMetrology at NRC Canada:
Metrology at NRC Canada: An NMI in an RTO Context Alan Steele NRC Measurement Science and Standards SIM Innovation Workshop Montevideo, Uruguay November 16, 2016 NRC: Canada s Research Technology Organization
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TIMCO ENGINEERING, INC. 849 NW State Road 45 Newberry, FL 32669 Sid Sanders - Phone: 352 472 5500 E-mail: sid@timco.cc Website: http://www.timcoengr.com ELECTRICAL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CALIBRATION LABORATORY, ELECTRONICS TESTING CENTER, TAIWAN No. 8, Lane 29, Wen Ming Rd., Kui Shan District Taoyuan City, Taiwan (R.O.C.) Wan-Chau Mou Phone:
More informationREPORT OF TIME AND FREQUENCY LABORATORY (VIETNAM METROLOGY INSTITUTE)
Trieu Viet Phuong Deputy head of Time and Frequency Laboratory (TFL) Vietnam Metrology Institute (VMI) N 0 8, Hoang Quoc Viet Road, Caugiay District, Hanoi, Vietnam About Time & Frequency Laboratory (TFL)
More information