Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Size: px
Start display at page:

Download "Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK"

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Standards & Calibration Laboratory Contact: Mr Martin Matthews Archcliffe Road Tel: +44 (0) Dover Fax: +44 (0) Kent CT17 9EN Website: Calibration performed at the above address only DC RESISTANCE DETAIL OF ACCREDITATION Specific Values ppm ppm ppm ppm ppm ppm ppm 1 k 3.0 ppm 10 k 2.2 ppm 100 k 20 ppm 1 M 30 ppm 10 M 440 ppm 100 M 0.20 % 1 G 0.30 % 10 G 0.31 % 100 G 0.31 % 1 T 1.2 % Other Values 0 to ppm m 10 to ppm m 100 to 1 k 600 ppm m 1 k to 10 k 600 ppm + 40 m 10 k to 100 k 600 ppm m 100 k to 1 M 600 ppm M to 10 M 0.15 % 10 M to 100 M 0.18 % 100 M to 10 G 1.2 % 10 G to 500 G 2.3 % Assessment Manager: MJLP Page 1 of 7

2 DC RESISTANCE (continued) 0 to ppm to ppm m 200 to 2 k 13 ppm m 2 k to 20 k 14 ppm + 33 m 20 k to 200 k 16 ppm m 200 k to 2 M 28 ppm M to 20 M 49 ppm M to 200 M 150 ppm + 10 k 200 M to 100 G 100 G to 2 T 0.30 % 2.0 % The applied voltage depends on the nominal resistance and may be up to 10 kv. Simulated values to support Megger range of insulation testers DC VOLTAGE 2 TΩ to 12 TΩ 5.0 % 12 TΩ to 35 TΩ 11 % 3 terminal devices 0 mv to 330 mv 69 ppm V 330 mv to 3.3 V 58 ppm + 18 V 3.3 V to 33 V 58 ppm V 33 V to 330 V 64 ppm + 21 mv 330 V to 1 kv 64 ppm mv 1 kv to 20 kv 0.10 % + 20 V 20 kv to 40 kv 0.10 % V 0 mv to 200 mv 9.0 ppm V 200 mv to 2 V 8.0 ppm V 2 V to 20 V 8.0 ppm + 30 V 20 V to 200 V 13 ppm V 200 V to 1 kv 13 ppm mv 1 kv to 15 kv 0.20 % V 15 kv to 90 kv 1.20 % DC CURRENT 0 A to 3.3 ma % na 3.3 ma to 33 ma % na 33 ma to 330 ma % A 330 ma to 2.2 A % + 60 A 2.2 A to 11 A % A 11 A to 550 A 0.30 % ma Simulated current using 50 turn coil, for the calibration of clampon ammeters. Assessment Manager: MJLP Page 2 of 7

3 DC CURRENT (continued) 0 na to 10 na 0.22 % + 13 pa 10 na to 100 na 0.26 % + 48 pa 100 na to 1 A 0.16 % na 1 A to 10 A 0.15 % na 10 A to 200 A 130 ppm na 200 A to 2 ma 130 ppm + 51 na 2 ma to 20 ma 130 ppm A 20 ma to 200 ma 130 ppm A 200 ma to 2 A 240 ppm + 64 A 2 A to 20 A 45 ppm A 20 A to 100 A 60 ppm + 30 A AC VOLTAGE 40 Hz to 10 khz 1 mv to 33 mv 0.20 % + 30 V 33 mv to 330 mv % + 30 V 330 mv to 3.3 V % + 70 V 3.3 V to 33 V % mv 33 V to 330 V % + 15 mv 330 V to 1 kv % mv 50 Hz 2 kv to 40 kv 1.7 % V 1 mv to 200 mv 40 Hz to 10 khz 250 ppm + 16 V 10 khz to 100 khz 920 ppm + 45 V 200 mv to 2 V 40 Hz to 10 khz 200 ppm + 53 V 10 khz to 100 khz 700 ppm V 2 V to 20 V 40 Hz to 10 khz 190 ppm V 10 khz to 100 khz 670 ppm mv 20 V to 200 V 40 Hz to 10 khz 150 ppm + 12 mv 10 khz to 100 khz 650 ppm + 15 mv 200 V to 1 kv 40 Hz to 10 khz 200 ppm mv At 50 Hz 1 kv to 50 kv 1.7 % V Assessment Manager: MJLP Page 3 of 7

4 AC CURRENT 40 Hz to 5 khz 100 A to 330 A 0.15 % A 330 A to 3.3 ma 0.12 % A 3.3 ma to 33 ma 0.11 % + 23 A 33 ma to 330 ma 0.11 % A 40 Hz to 330 ma to 2.2 A 0.12 % A 2.2 A to 11 A 0.11 % ma 40 Hz to 400 Hz 11 A to 550 A 0.31 % ma Simulated current using 50 turn coil, for the calibration of clampon ammeters. 10 Hz to 5 khz 12 na to 200 A 0.14 % + 12 na 200 A to 2 ma 0.12 % na 2 ma to 20 ma 0.12 % A 20 ma to 200 ma 0.12 % + 33 A 10 Hz to 200 ma to 2 A 0.14 % A 5 khz 200 ma to 2 A 0.28 % A 50 Hz 11 A to 2 ka 0.14 % ma FREQUENCY 1 Hz to 10 MHz 1.0 part in 10 7 Specific Values PHASE ANGLE 0.1 Hz, 1 Hz, 10 Hz, 100 Hz,, 10 khz, 100 khz, 1 MHz, 5 MHz and 10 MHz 1.4 parts in Hz and 60 Hz 0 to m CAPACITANCE Specific Values 100 pf % Standard capacitors available 1000 pf, 10 nf, 100 nf and 1 F % for the calibration of 1 F % capacitance bridges, meters etc. 100 pf to 10 F 0.20 % to % Assessment Manager: MJLP Page 4 of 7

5 INDUCTANCE Specific Values 100 H, 1 mh, 10 mh, 100 mh and 1 H 100 H to 1 H 0.20 % to % % Standard inductors available for the calibration of inductance bridges, meters etc. AC RESISTANCE 40 Hz to 1 to 10 k 0.10 % 50 Hz 0.02 to 5 5 to 1 k 0.60 % + 22 m 0.60 % + 40 m Nominal values suitable for the calibration of earth loop testers 40 Hz to 1592 Hz 1 to 10 k % to 0.20 % RCD TRIP TIMES 30 ms to 400 ms % ms Suitable for RCD testers ELAPSED TIME Nominal 60 s 5.0 ms Electronically triggered To support Megger products: Oil test set & check meters; The OTS range, Oil tan delta test set (otd) and otd cc. DC VOLTAGE 0 V to 1 kv 300 ppm V AC VOLTAGE 200 mv to 1 kv; 55 Hz 700 ppm V 10 kv to 100 kv; 50 Hz to 75 Hz 0.85 % + 80 V DISSIPATION FACTOR 750 V at 55 Hz 0 nominal 300 ppm nominal 300 ppm nominal 300 ppm nominal 300 ppm nominal 300 ppm kv at 55 Hz nominal 300 ppm nominal 300 ppm Assessment Manager: MJLP Page 5 of 7

6 PERMITTIVITY 750 V and 2 kv at 55 Hz 200 pf applied 3 nominal 700 ppm RESISTANCE At 500 V 5 MΩ to 5 GΩ 0.15% RESISTIVITY At 500 V DC 40 MΩ m to 40 GΩ m 400 ppm CAPACITANCE 750 V and 2 kv at 55 Hz 200 pf 700 ppm END Assessment Manager: MJLP Page 6 of 7

7 Appendix - Capabilities Introduction The definitive statement of the accreditation status of a calibration laboratory is the Accreditation Certificate and the associated Schedule of Accreditation. This is a critical document, as it defines the measurement capabilities, ranges and boundaries of the calibration activities for which the organisation holds accreditation. Capabilities (CMCs) The capabilities provided by accredited calibration laboratories are described by the (CMC), which expresses the lowest uncertainty of measurement that can be achieved during a calibration. If a particular device under calibration itself contributes significantly to the uncertainty (for example, if it has limited resolution or exhibits significant non-repeatability) then the uncertainty quoted on a calibration certificate will be increased to account for such factors. The CIPM-ILAC definition of the CMC is as follows: A CMC is a calibration and measurement capability available to customers under normal conditions: (a) as published in the BIPM key comparison database (KCDB) of the CIPM MRA; or (b) as described in the laboratory s scope of accreditation granted by a signatory to the ILAC Arrangement. The CMC is normally used to describe the uncertainty that appears in an accredited calibration laboratory's schedule of accreditation and is the uncertainty for which the laboratory has been accredited using the procedure that was the subject of assessment. The CMC is calculated according to the procedures given in M3003 and is normally stated as an expanded uncertainty at a coverage probability of 95 %, which usually requires the use of a coverage factor of k = 2. An accredited laboratory is not permitted to quote an uncertainty that is smaller than the published CMC in certificates issued under its accreditation. The CMC may be described using various methods in the : As a single value that is valid throughout the range. As an explicit function of the measurand or of a parameter (see below). As a range of values. The range is stated such that the customer can make a reasonable estimate of the likely uncertainty at any point within the range. As a matrix or table where the CMCs depend on the values of the measurand and a further quantity. In graphical form, providing there is sufficient resolution on each axis to obtain at least two significant figures for the CMC. Expression of CMCs - symbols and units In general, only units of the SI and those units recognised for use with the SI are used to express the values of quantities and of the associated CMCs. Nevertheless, other commonly used units may be used where considered appropriate for the intended audience. For example, the term ppm (part per million) is frequently used by manufacturers of test and measurement equipment to specify the performance of their products. Terms like this may be used in Schedules of Accreditation where they are in common use and understood by the users of such equipment, providing their use does not introduce any ambiguity in the capability that is being described. When the CMC is expressed as an explicit function of the measurand or of a parameter, this often comprises a relative term (e.g., percentage) and an absolute term, i.e. one expressed in the same units as those of the measurand. This form of expression is used to describe the capability that can be achieved over a range of values. Some examples, and an indication of how they are to be interpreted, are shown below. DC voltage, 100 mv to 1 V: % μv: Over the range 100 mv to 1 V, the CMC is % V μv, where V is the measured voltage. Hydraulic pressure, 0.5 MPa to 140 MPa: % ppm/mpa Pa Over the range 0.5 MPa to 140 MPa, the CMC is % p + ( p 10-6 ) Pa, where p is the measured pressure in Pa. It should be noted that the percentage symbol (%) simply represents the number In cases where the CMC is stated only as a percentage, this is to be interpreted as meaning percentage of the measured value or indication. Thus, for example, a CMC of 1.5 % means i, where i is the instrument indication. Assessment Manager: MJLP Page 7 of 7

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 8 New Vision Business Park Glascoed Road St Asaph LL17 0LP Contact: Mr Alan Horner Tel: +44 (0)1492 550 398 E-Mail: alan.horner@mcs-testequipment.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 1 Wilson Street Contact: Mr Ibrahim Ibrahim Thornaby Tel: +44 (0) 1642 626148 Stockton-On-Tees Fax: +44 (0) 870 143 1869 TS17 7AR E-Mail: ibrahim@calibrate.co.uk United Kingdom Website: www.calibrate.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Measurement House Contact: Mr David Gray Kingsway Tel: +44 (0)1792 588722 Fforestfach Fax: +44 (0)1792 582624 Swansea E-Mail: mail@haven.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK DC RESISTANCE Unit 4 Riverside Business Centre Walnut Tree Close Guildford Surrey GU1 4UG Contact: Ian Norman Tel: +44 (0)1483 302700 Fax: +44 (0)1483 300562 E-Mail: inorman@caltest.co.uk Website: www.caltest.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 72 Manchester Road Kearsley Bolton BL4 8NZ Contact: Mr A Leonard Tel: +44 (0) 1204 571499 Fax: +44 (0) 1204 571734 E-Mail: enquiries@airflowmeasurements.com Website: www.airflowmeasurements.com AIR VELOCITY

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Babcock International Group PC1409, Devonport Royal Dockyard Plymouth Devon PL1 4SG Contact: Mr C Burrow Tel: +44 (0)1752 324739 Fax: +44

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 3, Watt House Innovation Centre Pensnett Estate Kingswinford West Midlands DY6 7YD Contact: Mr A P Walker Tel: +44 (0)1384 401132 Fax: +44 (0)1384 400754 E-Mail: mail@quasartronics.com Website: www.quasartronics.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK code Location code Customers Sites 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Yussof Taha Tel: +673-2-386475

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Southern Calibration oratories Limited Issue No: 038 Issue date: 26 January 2018 Unit 7 Solent Industrial Estate Hedge End Southampton SO30

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK CET Structures Ltd. trading as CET Calibration M1 Commerce Park Markham Lane Duckmanton Chesterfield S44 5HS Contact: Mr Chris Locke Tel: +44 (0)1246 828318 Fax: +44 (0)1246 828319 E-Mail: chris.locke@cetcalibration.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK outhern Avenue Leominster Herefordshire HR6 0QH Contact: Dr N Wrigley Tel: +44 (0)1527 514015 Fax: +44 (0)1527 514016 E-Mail: nigel.wrigley@sercalcalibrations.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Avionic and Metrology Centre Unit G1/2 Treforest Industrial Estate Pontypridd CF37 5YL Contact: Mr P Ashurst Tel: +44 (0)1443 849970 Fax:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 6 Contact: Mr J Puttock Spectrum Business Estate Tel: +44 (0)1622 690187 Bircholt Road Fax: +44 (0)1622 678827 Parkwood E-Mail: jonputtock@aol.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bankhead Industrial Estate Contact: Miss Alexis Ross Bankhead Avenue Tel: +44 (0)1224 710033 Bucksburn Fax: +44 (0)1224 710099 Aberdeen E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44

More information

INAB Policy Statement on Scope Format for Calibration Laboratories PS27 1. INTRODUCTION

INAB Policy Statement on Scope Format for Calibration Laboratories PS27 1. INTRODUCTION INAB Policy Statement on Scope Format for Calibration Laboratories PS27 1. INTRODUCTION 1.1. The definitive statement of the accreditation status of a calibration laboratory is the accreditation certificate

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK DC RESISTANCE 2 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ Contact: Mr A Robson Tel: +44 (0)1642-718900 Fax: +44 (0)1642-718909 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 050 Issue date: 11 September 2017 0310 DPN 175 Lammas Road Corby Northamptonshire NN17 5JF Contact: Mr S MacLeod Tel: +44 (0)1536

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metrology Division Contact: Mr K Pallett Calibration House Tel: +44 (0)1332 867 700 Castings Road E-Mail: sales@comech.co.uk Derby Website:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44

More information

TR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By:

TR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By: CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL LF METROLOGY Approved By: Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of Approval: 2015-08-26 Date of

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PRESSURE Hydraulic Pressure (Gauge) Hewett Road Gapton Hall Industrial Estate Great Yarmouth Norfolk NR31 0NN Contact: Mr J Gunn Tel: +44

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 1 Cabot Business Village Holyrood Close oole Dorset BH17 7BA Contact: Mr Matthew Suter Tel: +44 (0)1202 658333 Fax: +44 (0)1202 659966

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Laboratory locations: Old Lane West Berkshire RG12 7AH Contact: Mr M Trotter Tel: +44 (0)1344 459314 Fax: +44 (0)1344 465556 E-Mail: martin.trotter@bsria.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ullman Instruments (UK) Ltd Chatsworth House Chatsworth Terrace Harrogate HG1 5HT Contact: Mr M Conboy Tel: +44 (0)1423 720360 Fax: +44 (0)1423

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Laboratory locations: 19 Iris Road Rogerstone Newport NP10 9LE Contact: Mr R Bale Tel: +44 (0)1633 897225 Fax: +44 (0)1633 897225 E-Mail:

More information

TRACEABLE MEASUREMENT CAPABILITY

TRACEABLE MEASUREMENT CAPABILITY PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 21-23 Campus Road Contact: Mr K G Dove Listerhills Science Park Tel: +44 (0)1274 393857 Bradford Fax: +44 (0)1274 393336 BD7 1HR E-Mail: sales@otc.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK The Calibration House Halesfield 7 Telford Shropshire TF7 4QL Contact: Mr R A Jones Tel: +44 (0) 1952 681 500 Fax: +44 (0) 118 927 6855 E-Mail:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONTROL AUTOMATION TECHNOLOGIES CORP 101 N Chestnut St. Winston-Salem, NC 27101 Rob Igoe Phone: 336 725 6020 x 111 CALIBRATION Valid

More information

ELTEL CALIBRATION LABORATORY

ELTEL CALIBRATION LABORATORY NABL ACCREDITED ELTEL CALIBRATION LABORATORY Our laboratory is NABL ACCREDITED in Electro-Technical Discipline as per the international standard IS/ISO/IEC-17025:2005 for both In-House & Site Calibrations.

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONTROL AUTOMATION TECHNOLOGIES CORP 6540 Emmaus Church Road Suite 106 Providence Forge, VA 23140 Rob Igoe Phone: 336 725 6120 Ext 2

More information

Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra

Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to

More information

SCOPE OF ACCREDITATION TO ISO 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO 17025:2005 & ANSI/NCSL Z540-1-1994 IET LABS, INC. 1202 VFW Parkway West Roxbury, MA 02132 David Sheena Phone: 800 899 8438 CALIBRATION Valid To: April 30, 2020 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INSTRUMENT CALIBRATION SOLUTIONS, INC. 413 Hopewell Avenue Aliquippa, PA 15001 Mr. David Beier Phone: 724 846 0136 CALIBRATION Valid

More information

Butler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C

Butler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland Calibration Laboratory Registration number: 256C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY TESTING SERVICES, INC. 2305 Millpark Drive Maryland Heights, MO 63043 Heather Ryan Phone: 314 770 0607 CALIBRATION Valid To:

More information

Calibration Specialists Ltd

Calibration Specialists Ltd The National Technological Park, Castletroy, Limerick Calibration Laboratory Registration number: 001C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule

More information

Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 10

Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 10 Calibration Laboratory Assessment Service CLAS Certificate Number 95-02 Page 1 of 10 400 Britannia Road East, Unit #1 Mississauga, Ontario L4Z 1X9 Contact: Mr. Vince Casali Tel (905) 890-7600, (800) 36FLUKE

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 EXPHIL CALIBRATION LABS, INC. 415 Central Avenue Bohemia, NY 11716 Steven Pidd Phone: 631 563 3520 CALIBRATION

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RS CALIBRATION SERVICES, INC. 1047 Serpentine Lane Pleasanton, CA 94566 Mr. Ralph Sabiel Phone: 925 462 4217 CALIBRATION Valid To: April

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EXPHIL CALIBRATION LABS, INC. 415 Central Avenue Bohemia, NY 11716 Steven Pidd Phone: 631 563 3520 CALIBRATION Valid To: October 31,

More information

Butler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C

Butler Technologies. Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland. Calibration Laboratory Registration number: 256C Unit 14, Block G, Maynooth Business Campus, Co. Kildare, Ireland Calibration Laboratory Registration number: 256C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. EL AL STANDARDS LABORATORY EL AL Head Office Ben-Gurion Airport Motty Shai Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. EL AL STANDARDS LABORATORY EL AL Head Office Ben-Gurion Airport Motty Shai Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EL AL STANDARDS LABORATORY EL AL Head Office Ben-Gurion Airport Motty Shai Phone: 972 3 9716596 CALIBRATION Valid To: July 31, 2019 Certificate Number: 4282.01

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TRANE LA CROSSE METROLOGY LAB 2313 20th Street South La Crosse, WI 54601 Rick McKenzie Phone: 608 787 4032 CALIBRATION Valid To: October

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CENTURY LABS II dba CENTURY CALIBRATIONS 1929 Lakeview Drive Fort Wayne, Indiana 46808 Robin Bork Phone: 260 471 1673 CALIBRATION Valid

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 MENTOR TECHNICAL GROUP METROLOGY LAB Caguas Real #100 Alhambra Granada Blvd. Caguas, Puerto Rico Angel Pabellon Phone: 787 536-6028

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wilmington Instrument Company, Inc. 332 North

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CENTURY LABS II dba CENTURY CALIBRATIONS 1929 Lakeview Drive Fort Wayne, Indiana 46808 Robin Bork Phone: 260 471 1673 CALIBRATION Valid

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONNECTICUT CALIBRATION LABS 327 S. Main Street Newtown, CT 06470 Joseph Zeolla Phone: 203 270 1263 CALIBRATION Valid To: October 31,

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Denver 3521 Lewiston St, Suite 12

More information

Calsytech, # 38 North Mada Street Nandambakkam, Chennai, Tamil Nadu. Discipline Electro-Technical Calibration Issue Date

Calsytech, # 38 North Mada Street Nandambakkam, Chennai, Tamil Nadu. Discipline Electro-Technical Calibration Issue Date Last Amended on 23.11.2016 Page 1 of 7 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 10 mv to100 mv 100 mv to1000 V 0.43% to 0.05% 0.05% to 0.01% 0.01% to 0.004% Calibrator, Calibrator by DC VOLTAGE 1mV to 20 mv

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INNOVATECIS CIA LTD. General Jose Maria Guerrero N69-170 y Alfonso del Hierro Quito, Ecuador 170103 Diego Almeida Phone: 593 260 40607 CALIBRATION Valid To:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 HAYES INSTRUMENT SERVICE, INC. 530 Boston Road Billerica, MA 01821 Tony Ganchi Phone: 978 663 4800 CALIBRATION Valid until: January

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 SIMCO SCIENTIFIC INSTRUMENT REPAIR AND CALIBRATION SERVICES CO., LTD. Flat 404 North Software Tower, NanSha IT Park Panyu NanSha, Guangzhou,

More information

Technical Services Department, BHEL, Piplani, Bhopal, Madhya Pradesh. Discipline Electro Technical Calibration Issue Date

Technical Services Department, BHEL, Piplani, Bhopal, Madhya Pradesh. Discipline Electro Technical Calibration Issue Date Last Amended on 29.02.2016 Page 1 of 6 SOURCE 1. DC VOLTAGE $ 100mV to 220 mv 220 mv to 220 V 220 V to 1000 V 2. AC VOLTAGE $ 50 Hz to 1 khz 3 mv to 220 mv 220 mv to 220 V 220 V to 1000 V 3. DC CURRENT

More information

For the National Voluntary Laboratory Accreditation Program

For the National Voluntary Laboratory Accreditation Program SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Transcat San Juan 281 Calle Matadero Urb Puerto Nuevo San Juan, PR 00920 Mr. Brian Samuelson Phone: 787-706-8855 Fax: 787-792-3614 E-mail: bsamuelson@transcat.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TRESCAL, INC. 5965 Shiloh Road East Alpharetta, GA 30005 Don Petersen Phone: 678 341 6090 CALIBRATION Valid To:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INSTRUMENT CALIBRATION SERVICE, INC., A TEST EQUIPMENT REPAIR CORPORATION company 5965 Shiloh Road East Alpharetta, GA 30005 Don Petersen

More information

Model 6600A Dual Source High Resistance Bridge

Model 6600A Dual Source High Resistance Bridge Dual Source High Resistance Bridge Based on proven NMI Design Range: 100 kω to 10 PΩ Voltages: 1 V to 1000 V (5000 V Optional) Automatic and Manual Operation Not affected by Temperature change 10 and 20

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Instrument Company, Inc. 332 North Fries

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Leigh Commerce Park Greenfold Way Leigh Greater Manchester WN7 3XJ Contact: Mr K Angus, Mr D Moore, Ms S Ward Tel: + 44 (0)125 253 3334 E-Mail:

More information

National Voluntary Laboratory Accreditation Program

National Voluntary Laboratory Accreditation Program SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Transcat St. Louis 527 Mae Court Fenton, MO 63026 Mr. Jim Beckner Phone: 636-349-7722 Fax: 636-349-4590 E-mail: jbeckner@transcat.com URL: www.transcat.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EAGLE EYE CALIBRATION LABS, INC. 21358 Nordhoff Street, Suite 101 Chatsworth, CA 91311 Kirpal Chhokar Phone: 818 993 0055 CALIBRATION

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 029 Issue date: 05 pril 2017 ccredited to JLR Calibration Centre Building

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Caliber Test & ment 2100 W. 6th Ave. Broomfield, CO 80020 Everett Hedrick Phone: 303 469 5335 CALIBRATION Valid to: May 31, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 YOKOGAWA CORPORATION OF AMERICA 2 Dart Road Newnan, GA 30265 Van Puymbrouck Phone: 770 254 0400 x 5021 CALIBRATION Valid To: December

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FUGRO SUHAIMI LIMITED, YANBU P.O. Box 31720 Yanbu Al-Sinaiyah-41912, Kingdom of Saudi Arabia Mohammed Baquer Hameed Phone: 009663 857

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 KIMBALL ELECTRONIC LABORATORY, INC. 8081 W 21st Lane Hialeah, FL 33016 Javier Balceiro Phone: 305 822 5792 CALIBRATION Valid To: June

More information

ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company

ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Oscilloscope Services 7827 Kingsley Houston, TX. 77087 Bill Whitworth Phone:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PO Box 25876 Safat 13119 Kuwait Contact: Mr Atul Madhukar Vaidya Tel: +965 1822600 Fax: +965 24761963 E-Mail: factory@ahleiasg.com Website:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 CONSUMERS ENERGY/LABORATORY SERVICES Laboratory Services 135 West Trail Street Jackson, MI 49201 Nick Serafin Phone: 517 788 2238 naserafin@cmsenergy.com

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Caltronix, Inc. 100 Town Centre Drive Rochester,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ACUCAL INC. 600 South 56th Street Chandler, AZ 85226 Thomas Efaw Phone: 480 753 7000 CALIBRATION Valid To: September

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. Calibration Laboratory Division 1600 Watterberg Way Alexandria, LA 71303 Jerry Kraus Phone: 225 925 2029 x 3028

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ADVANCED TEST EQUIPMENT CORP. 10401 Roselle Street San Diego, CA 92121 Gabriel Alcala Phone: 858 558 6500 CALIBRATION Valid To: April

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Tra-Cal, LLC 7901 Beechcraft Avenue, Suite

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENI Labs 3120 Independence Dr. Fort Wayne, IN 46808 Andrew Burd Phone: 260 471 6775 CALIBRATION Valid To: April 30, 2018 Certificate

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 BHD Test & ment 2100 W. 6th Ave. Broomfield, CO 80020 Everett Hedrick Phone: 303 469 5335 CALIBRATION Valid to: May 31, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRO LAB SERVICES, INC. 517 N. Fulton Avenue Evansville, IN 47710 Robert J. Dreier Phone: 812 423 5211 CALIBRATION Valid To: April 30, 2019 Certificate Number:

More information

President For the Accreditation Council Certificate Number Valid to January 31, 2010

President For the Accreditation Council Certificate Number Valid to January 31, 2010 A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY HAYES INSTRUMENT SERVICE, INC. Billerica, MA for technical competence in the field of Calibration This laboratory

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 BRUEL AND KJAER North American Service Center Calibration Laboratory 3079 Premiere Parkway Suite 120 Duluth, GA 30097 William Shipman

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro

More information

Dimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm

Dimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm IAS Accreditation Number Company Name CL-154 Almeer Technical Services Calibration Laboratory Address Plot No. 100/104, Area 7 P.O. Box 9240 Ahmadi, 61003 Kuwait Contact Name Satyananda Rao, Technical

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TesCom 2600 Longhorn Blvd., Ste. 112 Austin,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: 613 226 7920 CALIBRATION Valid To: September 30, 2020 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TRADEPORT ELECTRONICS CALIBRATION LABORATORY 1750 Steeles Ave. West, Suite 5 Concord, Ontario L4K 2L7 CANADA Barry Conway Phone: 905 660 3797 CALIBRATION Valid

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Los Angeles 1503 E. Orangethorpe

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TEKTRONIX CANADA 400 Britannia Road E, Unit 2 Mississauga, Ontario L4Z 1X9 Canada Andrew Sweeny Phone: 905 241 3021 CALIBRATION Valid

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 APPLIED TECHNICAL SERVICES, INC. 8400 Wolf Lake Dr. Suite 106 Memphis, TN 38133 Cathy Mansfield Phone: 770 423 1400 cmansfield@atslab.com

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Rothe Development, Inc. Metrology Services

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453 8003 CALIBRATION Valid To: March 31, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CASCADE ENGINEERING SERVICES, INC. 6640 185th Ave NE Redmond WA 98052 Contact: Charles Heidlage Phone: 425 895 8617 x 713 CALIBRATION

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z VITREK LLC Kirkham Road Poway, CA Kevin Clark Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z VITREK LLC Kirkham Road Poway, CA Kevin Clark Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 VITREK LLC 12169 Kirkham Road Poway, CA 92064 Kevin Clark Phone: 858-689-2755 CALIBRATION Valid To: October 31, 2020 Certificate Number:

More information

This annex is valid from: to Replaces annex dated:

This annex is valid from: to Replaces annex dated: Premises: (Son) & Nijmegen LF 0 0 DC/LF Quantities LF 1 0 DC Voltage measuring and generating 10 V 5 10-7 U zenerreferences 1 V and 1.018 V 2.3 10-6 U zenerreferences 0 V to 10 V 0.3 V 10 V to 200 mv 3

More information