CZ Micro Switch. Features. Contact Form. Characteristics Dielectric strength Shock. Ambient temperature Humidity

Transcription

1 CZ Micro Switch Features Virous of actuators, the operation position is adjustable. (such as CZ-71). Outer shell covered with intensive plastic, water-proof and oil-proof. The mechanical strength is better than CM type of micro swith, bear hitting. Contact Form NC NO Ratings Rated voltage VAC 20VAC 480VAC 8VDC 14VDC 0VDC VDC 20VDC Noninductive (A) Resistance Lamp Inductive Motor NC NO NC NO NC NO NC NO Inductive (A) NOTES: 1.Inductive load has a power factor of min.(ac) and a time constant of 7 msec.max.(dc). 2.Lamp load has an inrush current of times the steady-state current,while motor load has an inrush current of times the steady-state current. Characteristics Operation speed 0.mm-0cm/sec Operating frequency Mechanical: 0 operations/minute Electical: 0 operations/minute Contact resistance 1m max. (initial value) Insulation resistance 0m above(at 00VDC) 00VAC, 0/0 HZ for 1 minute between terminals of the same polarity Dielectric strength 0VAC, 0/0 HZ for 1 minute between currentcarrying and non-current-carrying metal parts 0VAC, 0/0 HZ for 1 minute between each terminal and ground Vibration Shock Ambient temperature Humidity Life Weight Degree of protection -HZ,mm double amplitude Mechanical durable: 1, 000m/Sec 2 (about 0G'S) Malfunction: 00m/Sec 2 (about 0G'S) - to + <9% RH Mechanical:,000,000 operations above (under rated OT) Electrical: 00,000 operations above About 0g IP Operating characteristics Models CZ-70 CZ-71 CZ-7 CZ-7 CZ-7 CZ-70 CZ-7140 CZ-71 CZ-7141 CZ-74 CZ-7144 CZ-71 OF Max. 00g 00g 00g 00g 00g g 220g 180g 240g 200g 280g 0g RF Min. 0g 0g 0g 0g 0g 40g 0g 0g 80g 0g 0g PT Max. mm 8.mm.0mm.mm mm.mm 20mm OT Min. 0.8mm.0mm.0mm.0mm.0mm 4.0mm 2.mm.0mm.0mm mm MD Max. 0.8mm 0.8mm 0.8mm 0.8mm 0.8mm.2mm 2.4mm mm 2.4mm mm OP mm mm mm. 1.2mm. 1.2mm 2 1mm 2 1mm40 1mm 40 1mm0 1.2mm0 1.2mm FP mm 2mm 4mm mm 01

2 CZ Micro Switch CZ-71 CZ-7141 CZ-70 CZ-7140 CZ-74 CZ-7144 CZ-70 CZ-71 CZ-7 CZ-7 CZ-7 CZ-71 02

3 CM Micro Switch Features Virous of actuators, action position is adjustable(such as CM1701) High switch on and off capacity(1a) High accuracy Wide range of operation speed Each type of CM series has solder terminal, screw terminal and tab terminal are selective Add A for solder terminal, add C for tab terminal, blank for screw terminal Contact Form NC NO Ratings Rated voltage VAC 20VAC 00VAC 8VDC 14VDC 0VDC VDC 20VDC Noninductive (A) Resistance NC NO NC NO (2) 2. Lamp Inductive (A) Inductive NC NO NC NO Motor Inrush Current NC NO max. max Characteristics Operation speed 0.01mm-1m/sec Operating frequency Mechanical: 240 operations/min. Electical: 20 operations/min. Contact resistance 1m max. (initial value Insulation resistance 0m above at 00VDC 00VAC, 0/0 HZ for 1 minute between terminals of the same polarity 0VAC, 0/0 HZ for 1 minute between current-carrying Dielectric strength and non-current-carrying metal parts 0VAC, 0/0 HZ for 1 minute between each terminal and ground Vibration -HZ,mm double amplitude Mechanical durable: 1, 000m/Sec 2 (about 0G'S) Shock Malfunction: 00m/Sec 2 (about 0G'S) Ambient temperature General purpose type: -2 to +80, Sealed type: -1 to +80 Humidity General purpose type: 8% RH max., Sealed type: 9% RH max. Life Weight Degree of protection Mechanical: 20,000,000 operations/min. Electrical: 00,000 operations/min. About 22g to 8g IP Operating characteristics Models CM0 CM1 CM CM CM CM7 CM8 CM9 CM1701 CM1702 CM170 CM1704 CM170 CM174 OF Max. 0g 00g 00g 0g 0g 0g 0g 0g 70g 0g 10g 10g g 10g RF Min. 4g 0g 0g 4g 4g 4g 4g 4g 14g 28g 22g 42g g 42g PT Max. mm 4mm 4mm mm mm mm mm mm mm mm 7.1mm 2.7mm 20mm 2.7mm OT Min. 0.1mm 1.mm 1.mm 1.mm 1.mm.mm.8mm.8mm.mm 2mm 4mm 2.4mm.mm 2.4mm MD Max. 0.0mm 1.mm 1.mm 0.0mm 0.0mm 0.0mm 0.0mm 0.0mm 1.27mm 1mm 1.02mm 0.mm mm 0.mm FP Max. 20.mm 1.8mm 28.2mm 24.8mm.mm 2.mm 4.mm OP(mm)

4 CM Micro Switch Operating characteristics Definitions of operating characteristics: OF: operating force Force needed to add to the executer unit to actuate switch contact RF: releasing force Force needed to add to the execter unit to make the switch contact back to normal position TF: total force Force needed to make executer unit move from free position to limitation position FP: free position Primary position of executer unit without external force adding to executer unit normal position to action contact position TTP: total tavel position The position of executer unit in case of executer unit reaching the limitation position PT: pretravel The distance or angle that the executer unit passes since free position to action position OT: overtravel The distance or angle that the executer unit surpasses action position OP: operating position The position of executer unit in case of the contact rapidly moving to the contact position for action RP: releasing position The position of executer unit in case of the contact rapidly backing to MD: movement differential The distance or angle from action position to reversion position TT: total tavel The distance or angle represents the movement till action and the total movement after all actions. Terminal Type CM-1701 CM-1702 CM-170 CM

5 CM Micro Switch CM-174 CM-170 CM- CM-7 CM-8 CM-9 CM-0 CM-1 CM- CM- 0

6 CS Micro Switch Model designations C S N 00 1 C Performance Contact resistance Insulation resistance Dielectric strength Life Terminal Contact: 1NC & NO 2NC NO Category Cover material: N: Nylon P: Phenoilc Current Spring type Model 1 m max. (initial) 0m min. (at 00VDC) 1,000 VAC 0/0 Hz for 1 minute Mechanical:,000,000 operations min. Electrical:0,000 operations min.(full load) Outer drawing CSN001C2 CSN0C2 CSN021C2 CSN01C2 CSN041C2 CSN01C2 CSN01C2 0

7 CFS Foot Switch Features Designation Model Rating Type of switch enclosed & contact arrangement Cable type/length Cantact Action Force Material of Rind CFS-1 A 20VAC Mirco-switch momentary 0.7mm 2,C/0. meter,1 meter~ meter 1.2 kg Standard Type Momentary Action CFS-2 CFS- 1A 20VAC A 20VAC CM1704 Mirco-switch momentary 2pcs. 0.7mm 2,C/1 meter, meter~2 meter 0.7mm 2,C/1meter,1 meter~ meter 2A2B 1.1 kg 1.2 kg Plastics Aluminum cast CFS-S 1A 20VAC CM mm 2,C/1 meter,1 meter~2 meter 2A2B 1.1 kg Standard Type CFS- A 20VAC Imported alternative switch 0.7mm 2,2C/1 meter,1 meter~2 meter PUSH ON PUSH OFF 2 kg Plastics Aluminum cast Alternate Action CFS- A 20VAC Imported Micro-switch 0.7mm 2,C/1 meter PUSH 1A PUSH 1B kg Plastics CFS-201 A 20VAC 0.mm 2,C/1 meter~ meter 0.7 kg Mini Foot Switch Front End Push CFS-01 CFS-1 A 20VAC A 20VAC Micro-switch Momentary 0.mm 2,C/1 meter~ meter 0.mm 2,C/1 meter~ meter 0.7 kg 0.9 kg Plastics Protective Guard Foot Switch CFS-02 CFS-0 CFS-0 1A 20VAC A 20VAC A 20VAC CM1704 Push butoom switch alternate action Imported micro-switch Accessory: Cable gland (No cable) PUSH ON PUSH OFF PUSH 1A PUSH 1B.2 kg.1 kg. kg Plastics and Aluminum cast Large Type CFS-402 1A 20VAC CM kg NOTES: 1, Add R for waterproof, available in CFS & CFS4. 2, Add Z for aluminum housing, available in CFS1, CFS# & CFS4. CFS CFS-01 CFS-1 2 CFS-1 CFS-2 CFS- S CFS-02 CFS

8 Toggle Switch Features The current has A and 1A Movement way has fixed type and auto-return type (both single-throw and double-throw can return). The terminal block has screw terminal and solder terminal(tab terminal also can be used) Rainproof cap, water-proof and oil-proof, it is suitable for full series products. Mounting hole: mm Model designations CO B 1 2 Ratings Characteristic Type AC Rating DC Rating Contact resistance 1M max. (initial) Resistance Inductive Lamp CO C CO C CO C A 20V 1A V 1A 20V 20A V A 20V 1A 20V 1A 20V 20A V 00W 0V 00W 200V 400W V 800W 20V A 20V 0.8A V 0.A 20V 0.9A V A 20V A V 0.A 20V 0.A V 1A 0V - Insulation resistance Dielectric strength Vibration Ambient temperature Humidity 0M above (under 00VDC) 2000VAC 0/0Hz for 1 minute to Hz mm double amplitude -2 to +80 8%RH max. Motor CO C CO C 200W V 00W 20V 400W V(single phase) 0W 20V(three phase) 70W 20V(three phase) 7A 0V - Life Mechanical: 00,000 operations min. Electrical: 0,000 operations min. Designation Signal Description Type Contact Terminal CO COR C CR A B C A 20VAC A 20VAC Spring return 1A 20VAC 1A 20VAC Spring return Single pole single throw ON-OFF Single pole double throw ON-ON Single pole double throw(central OFF) ON-OFF-ON Single pole double throw(central OFF single return) ON-OFF-ON Double pole single throw ON-OFF Double pole double throw ON-ON Double pole double throw(central OFF) ON-OFF-ON Double pole double throw(central OFFsingle return) ON-OFF-ON Tab terminal Screw terminal Solder terminal Nameplate CO-P1 CO-P2 CO-P 08

9 Toggle Switch C0B CB C0RB CRB C021B C21B C0R21B CR21B C0B CB C0RB CRB C022B C22B C0R22B CR22B C01B C1B C0R1B CR1B C02B C2B C0R2B CR2B Terminal Type Rainproof cap (Tow) 09

10 Power Pushbutton Switch Features Metal series shell Plastic series shell Characteristic Model Specification Mounting type Connection terminal Material CBSN- A KW Flush Mounting M. Iron CBSN-1 1A 2.2KW M4 CBSN-0 0A.7KW M CBSP-1 CBSP-0 1A 2.2KW 0A.7KW Surface Mounting M4 CBSY-1 CBSY-0 1A 2.2KW 0A.7KW M4 CBSY-1 1A 2.2KW Flush Mounting M. Plastic CBSY-0 0A.7KW M4 CBSN- CBSN-1

11 Power Pushbutton Switch CBSN-0 CBSP-1 CBSP-0 CBSY-1,0 CBSS-1,0 CPB-2 CPB-

12 Pushbutton Switch Model designations CBFM 2 A R Contact Form NC NO Ratings Characteristics Rated voltage Noninductive (A) Resistance Lamp Inductive (A) Inductive Motor Inrush Current (A) Operation speed Operating frequency 0.01mm-1m/sec Mechanical:240 operations/ minute, Electrical:20 operations/ minute NC NO NC NO NC NO NC NO NC NO Contact resistance 1m below( initial) VAC 20VAC 00VAC Insulation resistance Life 0M above (at 00VDC) Mechanical:20,000,000 times above Electrical:00,000 times above 8VDC 14VDC 0VDC VDC 20VDC 1 1 (2) max. max. Notes: 1. Each type has solder terminal, screw terminal and tab terminal, which are all selective. 2. Converse operation of actuator is always kept because of the compressiong of spring.it will be free and do switch on and off action under lever action.because when the pole stopper is kept by actuators (free state) so it can bear vibration and hitting. 1A 20VAC CM Micro Switch Terminal Type Number Model Fixed hole distance Connection terminal Code number CBFM CBLM CBMM 2 0 B A C Details Even button Convex button Big head 2m/m 0m/m Screw terminal Solder terminal Tab terminal Color of pushbutton switch R G Y B W Red Green Yellow Black White

13 Pushbutton Switch CBFM-2 CBFM-0 CBLM-2 CBLM-0 CBMM-2 CBMM-0 Appearance and characteristics CBF-2(0) Even button CBM-2(0) Mushroom button CBK-2(0) Latching button CIBN-2(0) Direct type of button with indicator lamp CBL-2(0) Convex button CSS-2(0) Two or three positions selector switch with short lever 1

14 Pushbutton Switch CSS-2(0) Automatic return switch with short lever CIB-2(0) Transformer type of push-button with indicator lamp CPNR-2(0) Indictor lamp CPR-2(0) Transformer type of inicator lamp base 1A 1B 1A base, 1B base Contact type =1NO, 01=1NC, =1NO+1NC, 22=2NO+2NC Model D d Size(mm) L1 L2 CBF (24.) 0(4) 1(18.) 40/48 CBF /48 CBM /0 CSS /1 CIBN / CBK /0 14

15 Cassette Assembly Terminal Block CBC- CBC-20 L=1.7+8.xn L1=.+8.xn n=no. of poles L=17.+.8xn L1=.2+.8xn n=no. of poles No. of poles No. of poles L L L L CBC-0 CBC-0 L=18+1.1xn L1=1+1.1xn n=no. of poles L=.+2xn L1=18.+2xn n=no. of poles No. of poles No. of poles L L L L CBC-0 CBC-200 L=4+27xn L1=19+27xn n=no. of poles L=4.+.xn L1=19.+.xn n=no. of poles No. of poles No. of poles L L L L