METAL PASSAGE CONFIRMATION SENSORS
|
|
|
- Virgil Reynolds
- 5 years ago
- Views:
Transcription
1 SELECTION CHART Amplifier Unit Shape Power supply Output AC/220V 0/60Hz Relay Contact: SPDT AC20V 2A / DC30V 3A Solid State:Open-Collect or 0mA Max. MDA - 00 Sensor head Shade Minimum Detectable object 0 2.0mm dia. steel ball MSC mm dia. Steel ball MSC mm dia. steel ball MSC-0 0 X 0 (LXW).0mm dia. Steel ball MSR X 0 (LXW) 7.0mm dia. steel ball MSR-200 Y-02
2 SPECIFICATIONS Amplifier Unit Power Supply Power Consumption Sensitivity adjustment AC /220V +% 0/60Hz 3VA Max. By sensitivity selector switch and fine-adjustment trimmer Timers Solid-State Relay Contact Normal/OFF delay 40ms ( by switch ) ONE-SHOT 40ms ( fixed ) Time interval of detection (Note) Solid-State Relay Contact Normal OFF delay 7ms Max. 7ms Max. 2ms Max. Control Output Sensor Adapt Solid-State Relay Contact Open-collector:0mA max. ( DC40V ) SPDT 20VAC 2A ( resistive ) ; 30VDC 3A ( resistive ) All models of Passage Confirmation Sensors Correct Cable length Output Status Indicator Operating Temperature Operating Humidity Isolate Resistance Voltage Resistance Vibration Resistance Shock Immunity Protection Category Weight By switch NO/NC Changeable ( By switch ) Power Indicator & Operation Indicator - C ~ + C 3~ 8%RH 0M Max. ( 00VDC MEGA ) one time across power terminal & exposed, two times at all terminal ( non-contact output and sensor ). AC,00V, 0/60Hz min one time across power terminal & exposed metal, two times at all terminal ( non-contact output & sensor; contact ). directions,2 hours respectively to Hz,.mm double amplitude in X, Y, and Z 0m/s2G in X, Y, and Z directions,3 times respectively IP30 Approx.300g Note: Time to detect minimum size Object, Longer detection time if object is larger. Y- 03
3 Sensor head Item Detection Area Detection Object Type MSC-00 MSC-07 MSC-0 0mm dia. 7mm dia. 0mm dia. Moving ferrous metal ( sensibility of non-ferrous metal is low ) Min. Target 2.0mm dia. Steel ball 2.mm dia. Steel ball 3.0mm dia. Steel ball Operating Temperature -2 C ~ +70 C ( Without icing ) Operating Humidity 3-90%RH Isolate Resistance Voltage Resistance Vibration Resistance Shock Immunity Cable Weight Protection Category Housing Material Sensor Face Except for expose head & isolate wire with connection Except for expose head & isolate wire with connection to Hz,.mm double amplitude in X, Y, and Z directions,2 hours respectively 0G in X, Y, and Z directions,3 times respectively 3m ( Coaxial Cable ) Approx.430g Approx.800g Approx.200g IP67 ALUMINIUM ABS Item Detection Area Detection Object Min. Target Type MSR-0 MDS-L200 0x0mm 200(L)x0(W) Magnetic metal ( The sensibility of non-magnnetic metal is not well ).0mm dia. Steel ball 7.0mm dia. Steel ball Operating Temperature Operating Humidity Isolate Resistance 0M -2 C ~ +70 C ( Without icing ) 3-90%RH Voltage Resistance Vibration Resistance Shock Immunity AC,000V/min to Hz,.mm double amplitude in X,Y,and Z directions,2 hours respectively 0G in X,Y,and Z directions,3 times respectively Cable 3m ( Coaxial Cable ) Weight Approx.,300g Approx.2,0g Protection Category IP67 Material Housing Sensor Face ABS ABS ALUMINIUM Y- 04
4 PRECAUTIONS FOR PROPER USE Disturb of the around metal When mounting on a steel base, follow the guidelines below to prevent detection of the mounting material. Dimension l m Moving metal MSC-00 MSC-07 MSC m MSR-0 MSR-200 UNIT: mm l l When mounting on an iron base is necessary, follow the guidelines given below must be satisfied. Otherwise, it may be resulted in a mistake operation. MSC-00 MSC-07 Drop through mount: Drill a With min. diameter 0f 2mm. hole 34mm Max. 2 MSR-0 MSC-0 Drop through mount: Drill a With min. diameter 0f 0mm. hole mm Max. 40 MSR-200 Note: The type of MSR-0.0 & MSR should be mounted on the surface in order to minimize the interference of metal. Y- 0
5 Interference of sensor each other When installing 2 or more sensors of the same model in close proximity, it is necessary to connect the grounding screw to the machine ground and to maintain spacing greater than the distance shown in the following table to prevent interference. Dimension Series(d) parallel(d2) MPC-00N MPC-07N32. MPC-0N33.0 MPR-0N3.0 MPR-200N UNIT: mm Other precautions: The operation of the sensor is stable to 2 seconds after the power is applied. Do not use Sensor signal immediately on power-up. In order to prevent interference, keep exposed cable wire mm or less.(see diagram) When target has stopped or a wire break occurs, the output is ONE PULSE(40ms) Don't touch the sensor's active face at the status of high sensitivity, because atouchbyhandwillbedetected. mm Max. CHARACTERISTICS Target speed-size chart MSC-00 Speed V(m/s) 20 Iron brass Target (m) 20 Speed V(m/s) MPC Iron brass (m) 20 Target Check domain Check domain Target size 0. 9 (mm) Target size (mm) Y- 06
6 MSC-0 Output residuary voltage Speed V(m/s) 20 Target (m) Iron 20 brass Residuary voltage (V) Check domain Target size (Mm) ACTION CHART Detects object PASSAGE NO Action method N.O. N.C. Timer shift Solid-contact Relay-contact Detects indicator Power indicator TIMER NORMAL ON OFF ON OFF ON OFF ON OFF B B A A power off Note : When a target is passing, the Output of the contact is on, while the non-contact is Changeable ( N.O.or N.C. ). Note 2: Output of the contact is oneshot type. It can output a 40ms fixed pluse-width Independent of the time the target present. A: 40ms(OFF DELAY) B: 40ms(ONE SHOT) Y- 07
7 F2LP-W0M F2LP-W7M F2LP-W0M F2LP-W7M Y- 08
8 TH- TH-20 Y- 09
ES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
E2F. Cylindrical Proximity Sensor in Plastic Housing. Applications. Ordering Information. Sensors. Accessories (Order Separately)
Cylindrical Proximity Sensor in Plastic Housing High quality full body plastic housing for high water proof requirements Polyarylate housing for light chemical resistance Applications Detection of bottle
TL-W. Standard Flat Inductive Proximity Sensors. Ordering Information. Front and side facing surface IP67 DC 2-wire and DC 3-wire models
Standard Flat Inductive Proximity Sensors Front and side facing surface IP67 DC -wire and DC -wire models Ordering Information DC -wire Models Shape distance Model Output and operating status mm MD1 *1
High Accuracy Positioning Sensors EG Series Features
High ccuracy Positioning s EG Series Features Ultra-small sensor head Non-contact, stable detection in wide temperature range Highly stable amplifier provides 1 µm. Mil repeatability Hi/Lo tolerance detection
Inductive Proximity Sensor
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com distance Supply voltage
Non-Ferrous-Metal-Detecting Proximity Sensor (Separate Amplifier Type)
Non-Ferrous-Metal-Detecting Proximity Sensor (Separate Amplifier Type) ECY-SD Proximity Sensor with Separate Amplifier Unit for Detection of Non-ferrous Metals with Simple Adjustment Detects aluminum,
Solid-state Timer H3DS
Solid-state Timer H3DS DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC
E2S World's Smallest Square Sensor with Built-in Amplifier
Compact Square Inductive ES World's Smallest Square Sensor with uilt-in mplifier Features 5.5 mm World's Smallest Sensor with uilt-in mplifier The 5.5 mm x 5.5 mm type permits smaller, space-saving machines
OFF-delay time. 7.5 s. 15 s. 30 s. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category
Safety Relay Unit Four kinds of -mm wide Units are available: A -safety contact model, a -safety contact model, and models with safety contacts and OFF-delay safety contacts. Also available are 7.-mm wide
Inductive Proximity Sensor
Inductive Proximity Sensor Linear Proximity Sensor with High-accuracy Resolution Resolution is 0.05% of the maximum sensing distance. The model with a sensing distance of 1.2 mm ensures a resolution of
Contents H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A. Solid-state Timer. Common to ALL Timers
Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2 for Low Voltage, and EMC Directives. Approved by UL and CSA. Lloyds/NK approvals.
ON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Solid-state Timer CSM DS_E_
D7F. Detects Changes in Machine. Vibration. Vibration Sensor with Linear Output or Manual Setting. Ordering Information
with Linear Output or Manual Setting Detects Changes in Machine ON/OFF output can be set and checked quickly and easily from the vibration level meter. waveforms can be checked using the AC monitor output.
Cylindrical type proximity sensor
Cylindrical type Cylindrical type proximity Features Improved the noise resistance with dedicated IC Built-in reverse polarity protection circuit (DC 3-wire type) Built-in surge protection circuit Built-in
Model Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models
Solid-state Power OFF-delay Timer H3DE-H Timers Two delay-time models available. 0.1 to 12 seconds (S Series) 1 to 120 seconds (L Series) Covers wide range of supply voltage. Model Number Structure Model
E3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features
bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that
No mark Time-limit SPDT (1c) A Time-limit DPDT (2c) B Time-limit SPDT (1c), Instantaneous SPDT (1c) S DIN W48 H48mm.
Series Digital LCD Timer DIN W48 H48mm Features Power supply : 4-4VAC 5/6Hz, 4-4VDC universal Easy to switch Up/Down mode programmable output modes and timing ranges () Selectable function by front digital
Limit Switch Style Inductive Prox
Limit Switch Style Inductive Prox Economical, Limit Switch Style Sensor with Plastic Body Low cost Wide operating voltages (10 to 0 VDC and 90 to 250 VAC) Directly switches AC loads up to 500 ma, DC loads
HPJSeries HPJ. Ultraminiature Photoelectric Sensors with Self-contained Amplifier
Ultraminiature Photoelectric Sensors with Self-contained Amplifier HPJSeries HPJ Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8mm (thru scan model) 30
Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj
Ratchet Relay Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input
E2B PROXIMITY SENSORS
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-00 0 Ph: +9 8888 Fax: 0 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com EB PROIMITY SENSORS A ne w g ener ation in
Timers GT3F. GT3F Series True Power OFF Delay Timers. Phone: Fax: Web: -
Key features: True power OFF-delay up to minutes No external control switch necessary Available with reset inputs Mountable in sockets or flush panel Specifications Operation UL, c-ul Listed File No. E55996
Long-distance Separate-amplifier Proximity Sensors ES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier ES Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
Solid-state Timer H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A
Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2. Conforms to EMC standards (EN50081-2 and EN50082-2). Approved by UL and CSA. Lloyds/NK
Rectangular Proximity Sensor
Rectangular Proximity Sensor A Variety of Models Available for a Wide Range of Applications ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575
Type Sealing Poles Contacts Rated voltage Model 5PST-NO, SPST-NC 24 VDC *1
Slim Relays with Forcibly Guided Contacts Conforming to EN Standards EN50205 Class A, approved by VDE. Ideal for use in safety circuits in production machinery. Four-pole and six-pole Relays are available.
Classification Enclosure rating Contact form Contact material
PCB Relay Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm.
E2C-EDA. Proximity Sensor with Separate Amplifier Enables Easily Making Highprecision Sensitivity Settings. Ordering Information
Authorised Distributors:Intech Systems Chennai Pvt. Ltd, Chennai-00 032 Ph: +91 44 4353 Fax: 044 4353 7 E-mail: info@intechchennai.com Website: www.intechchennai.com High Precision Positioning Inductive
TL-W5MD1 2M *1 *3 TL-W5MD2 2M
Flat Inductive CSM DS_E_9_ Standard Flat s in Many Different Variations Only mm thick yet provides a sensing distance of mm (MC). Aluminum die-cast models also available. Be sure to read Safety Precautions
Classification Enclosure rating Contact form Model Standard Flux protection SPST-NO G6RL-1A
PCB Relay Low-profile power relay with maximum switching of 8 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm. RoHS
Operating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)
![Operating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)](/thumbs/83/88087955.jpg "Operating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)")
Built-in Amplifier Photoelectric Sensor E3S-A/B Revolutionary High-performance High-quality Sensor with Built-in Amplifier can be adjusted in seconds because the optical axis coincides with the mounting
Capacitive Proximity Sensor
Capacitive Proximity Sensor Compact and Ideal for Robot Hands and Various Built-in Applications for LCD, Wafer, and PDP (Plasma Display Panel) Detection Flat head is only 5.5-mm thick. Robot Cable ensures
Solid-state Twin Timer
Solid-state Twin Timer -F Operates in flicker- or flicker- start mode with one Unit. Independent - and -time settings. Combinations of long - or -time and short - or -time setting are possible. Long time
Solid-State Digital Counter H7AN
Solid-State Digital Counter Preset and Totalizing Counters with Up to 8-Digit LED Displays Draw-out construction allows setting, servicing without disconnecting wiring Choose from selectable UP/DOWN or
Ultraminiature Photoelectric Switches with Self-contained Amplifier
Ultraminiature Photoelectric Switches with Self-contained Amplifier HPJ Series Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8 mm (thru scan model) 30 x
Solid-state Timer H3DS
Solid-state Timer H3DS CSM_H3DS_DS_E_2_1 DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock.
Solid-state Timer H3DS
Solid-state Timer H3DS Timers DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to
E3S-CL. Distance setting photoelectric sensor in metal housing. Features
Distance setting photoelectric sensor in metal housing High water, oil and detergent resistance Minimal black/white error for highest reliability detecting different colored objects () Features Eliminates
G6C. Miniature High Capacity Relays with SPST-NO 10A and SPST-NO + SPST-NC 8A. Model Number Legend. Application Examples.
Miniature High Capacity Relays with SPST-NO 0A and SPST-NO + SPST-NC A SPST-NO 0A and SPST-NO + SPST-NC A for power switching and output that satisfy the needs for space-saving. Small High-capacity Relays
Solid-State Timer. ON-delay, Repeat cycle/signal OFF start, Repeat cycle/signal ON start, Signal ON/OFF-delay, Signal OFF-delay, and Interval
Solid-State Timer Analog Set Multifunction Timers in Slim Design for Track Mounting All settings are made though front panel Six operating modes in a single timer provides flexibility for many applications
Contents H3DS. DIN Track Mounted, Standard 17.5-mm Width Timer Range. Broad Line-up of H3DS Series. Solid-state Timer. Common to ALL Timers H3DS-X
Solid-state Timer H3DS DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC
Type Sealing Poles Contacts Rated voltage Model Standard Flux-tight 4 poles 3PST-NO, SPST-NC 24 VDC G7SA-3A1B. Type LED indicator Poles Rated voltage
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
Solid-state Timer H3DE
Solid-state Timer H3DE DIN-rail Mounted, Standard 22.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/DC) reduces the number of timer models kept in stock. (except for H3DE-H) 12-VDC
Product Discontinuation Notices
PRODUCT NEWS Product Discontinuation Notices August 1, 2011 Ultrasonic Sensors No. 2011264E Discontinuation Notice of Ultrasonic Sensor E4A special specification model, E4B special specification model,
02/11/2015
17.5 mm - 1 Relay 5A EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer
Fluoro plastic housing for highest chemical and detergent resistance
Chemical Resistant Inductive Proximity Sensor E2FQ Fluoro plastic housing for highest chemical and detergent resistance Ordering Information Shape Shielded Sensing distance PNP (NO) DC 3-wire models NPN
OMRON. H3DE - Standard Timer. H3DE-G - Star-Delta Timer. H3DE-F - Twin Timer. H3DE-H - Power OFF- Delay Timer
OMRON Analog Set Multifunction Timers Series To view data sheets, click on any link below: - Standard Timer -G - Star-Delta Timer -F - Twin Timer -H - Power OFF- Delay Timer Multifunction Timer Analog
Safety Relay Unit. OFF-delay time
Safety Relay Unit The Series Offers a Complete Line-up of Compact Units. Four kinds of -mm wide Units are available: A -pole model, a -pole model, and models with poles and OFF-delay poles, as well as
Timers. GT3A Series Analog Timers. GT3A-1 GT3A-2 GT3A-3 GT3A-4,-5,-6 Operation Multi-mode Multi-mode with inputs (11 pins) Time Range
GT3A Key features: 4 selectable operation modes on each model External start, reset, and gate inputs Panel mount or socket mount Large variety of timing functions and output status indicating LEDs UL,
General-Purpose Photoelectric Sensors with Self-Contained Amplifier
General-Purpose Photoelectric Sensors with Self-Contained Amplifier HP Series The convenience of industry standards, plus reliability. Effective light axis alignment 50% power savings Prevention of accidental
Label Sensor. Ordering Information. Application Example E3S-CD68/CD63. Ideal for Detecting Labels on Bottles. E3S-CD68/CD63 Label Sensor
Ideal for Detecting Labels on Bottles Satisfies the requirements of IP67. Ensures a vibration resistance of 10 Hz to 2 khz and a shock resistance of 1,000 m/s 2 (approximately 100G). Incorporates an NPN
Solid-state Timer. Operation/resetting system Time-limit contact Time ranges Model
Solid-state Timer PCB-mounting Time Unit for High-frequency Applications Ideal for high-frequency applications with 1-ms reset time (including during operation) either for power resets or external resets.
E3JM/E3JK. Two Models Contribute to Overall Cost Reduction. Built-in Power Supply Photoelectric Sensor. Ordering Information
Built-in Power Supply Photoelectric Sensor EJM/ CSM_EJM DS_E Two Models Contribute to Overall Cost Reduction EJM Terminal Block Models Easy to wire and adjust. Pre-wired Models Slim body is economically
05/09/2012
17.5 mm EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer ON LED) Option
Ordering Information. PCB Relay G6RL. Model Number Legend: Low-profile power relay with maximum switching of 10 A
PCB Relay G6RL Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) IEC 60947-5-1, AC-15, DC13 Clearance and creepage distance: 10
G2RV-SL Slim I/O Relay will be discontinued February 2019
NO: RL-162 PRODUCT: G2RV-SL Slim Relay DATE: February 2018 TYPE: Discontinuation Notice G2RV-SL Slim I/O Relay will be discontinued February 2019 Discontinuation Date: February 2019 Note: Date is subject
Analog Timer TTL Series
Analog r TTL Series Part Number Description TTL - ❶ ❷ ❸ ❶ Pin Type 8 : 8Pin Socket and Panel mounted ❷ Timing Mode A : A, A1, F1, I B : A, A1, B, F ❸ Supply Voltage 110/220VAC 24VDC 110VDC General Specification
High-precision Optical Switch
High-precision Optical Switch Optical System Achieves 1-mm Operating Position Repeatability in this 4-way Switch A knife-edge mechanism in the optical system provides greater precision for a more stable
PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.
Ordering Information. Latching Relay MMK. Available Models. Models Conforming to Auxiliary Power Relay Specifications
Latching Relay MMK CSM_MMK_DS_E_1_1 Mechanically Latching Relays Based on the MM Power Relay Low power consumption due to mechanical latch for economic operation. Relays with mixed coil specifications
MY-GS. Miniature Power Relays. Mechanical Indicators Added as a Standard Feature to Our Bestselling MY General-purpose Relays.
Miniature Power Relays CSM DS_E_1_1 Mechanical Indicators Added as a Standard Feature to Our Bestselling MY General-purpose Relays Relays with AC and DC coils have different colors of operating indicators
PCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Fully sealed construction. Unique moving
08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
Bulletin 700-HX Multifunction Digital Timing Relay
Bulletin 700-HX Multifunction Digital Timing Relay Model Operating Mode Timing Range Socket Type Contact Output No. of Pins Input Voltage Cat. No. Cat. No. 700 HX A mode: Signal ON-Delay 1 A-1 mode: Signal
Proximity Sensor Terminology
The following descriptions refer to the European standard EN 60947-5-2. of 2007. The specifications given here are intended to be minimum performance values described by the standard. Alignment must not
PROXIMITY SENSOR TERMINOLOGY
Never use this desk reference for installation or operation of equipment. Refer to manual for installation and operation instructions. The following descriptions refer to the European standard EN 60947-5-2.
Photoelectric Sensors XUV Sensors with Separate Optical Heads
The XUV series of separate optical sensing heads and amplifiers provides maximum flexibility in difficult applications. Features: M 8 x Thru beam M 8 x -- Reflex Clip-on -- Thru beam Clip-on -- Reflex
Overtravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0
Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.
SENSORS S2Z SERIES MAXI SENSORS CARATTERISTICHE APPLICATIONS HIGHLIGHTS
MAXI SENSORS S2Z SERIES The new S2Z Maxi series offers 4 models, with basic optic functions: - through beam - polarized retroreflex - diffuse proximity - background suppression Versions with continuous
Classification Terminal Shape Contact form Enclosure rating Model Rated coil voltage
ow-profile Relay with Various Models ow profile:.7 mm in height. Creepage distance 8mm between coil and contacts 0 kv Impulse withstand voltage Models with AC coil available. High-Inrush model available
Cylindrical Photoelectric Sensor. 6. Connection F Sensing Distance. 100: 100 mm. 300: 300 mm 2M: 2 Meters 5M: 5 Meters. 5. Output NPN - NO, NC
Cylindrical Sensor Proximity SALIENT FEATURES Metal Housing AC 2wire- NO, NC DC 3 Wire- NPN, PNP DC Dual Output Models Upto 5 m sensing distance Diffuse, Retro, Through Beam Measurement Model Number Legend
2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
Remote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
Multi-voltage Multi-function. Wiring diagram (without control signal)
80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of
Enclosure rating. LED indicator with test button G2R-1-SNI G2R-2-SNI Unsealed Diode. LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI
General-purpose Relay CSM_GR-_-S_DS_E Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
Weekly Timer. ON/OFF and cycle operations up to one week Two SPST-NO time limit contacts with manual override switches
Weekly Timer Timer Provides Prompted Programming, Flexibility in Programs Within the Week AM/PM display 24 program steps A different program possible each day Over midnight settings possible Two independent
T ime Delay Relays General information
General information Time delay relays FUJI time delay relays feature top performance and dependability. These compact industrial time delay relays are specifically designed for process control, machine
onlinecomponents.com
General information Time delay relays FUJI time delay relays feature top performance and dependability. These compact industrial time delay relays are specifically designed for process control, machine
PCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
DIN 22.5/17.5 Size Lineup of A Wide Range of Measuring and Monitoring Relays. Model Number Structure
New Product News Measuring & Monitoring Relays K8AK/K8DS Series DIN 22.5/17.5 Size Lineup of A Wide Range of Measuring and Monitoring Relays Compact 22.5 mm and 17.5 mm housings Resistant to high-frequency
Sensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
Fuzzy Temperature Controllers E5AF
Fuzzy Temperature Controllers 1/4 DIN Controller Combines Fuzzy and PID Control For Fast Response to Process Disturbances Advanced PID control provides optimal response during start-up and steadystate
LED Displacement Sensor
LED Displacement Sensor Low-cost LED Displacement Sensor Offers 10-micron Resolution of 25 mm (0.98 in) with measurement range of ±4 mm (0.16 in). Easy-to-use, built-in amplifier. Fast 5-millisecond response.
Remote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
Solid-state Timer H3DE
Solid-state Timer H3DE CSM_H3DE_DS_E_3_2 DIN Track Mounted, Standard 22.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/DC) reduces the number of timer models kept in stock. (except
IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance
13 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.139 Sensor selection guide... P.9~ General precautions... P.1 PHOTO PHOTO
E3S-A/B. Built-in Amplifier Photoelectric Sensor. Ordering Information. Revolutionary High-performance High-quality Sensor with Built-in Amp
Built-in Amplifier Photoelectric Sensor Revolutionary High-performance High-quality Sensor with Built-in Amp can be adjusted in seconds because the optical axis coincides with the mounting axis. Highly
Description. 2-wire type reduces wiring cost Wiring time and labour is reduced by one-third compared to 3-wire types. Wiring errors also decrease.
Self-contained EZ /EV Series Features Compact sensor head Visible output indicator built into sensor Flexible cable joint -rated housing Description Space-saving With a sensor body up to % shorter than
Distance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance Hyper LED mounted. Finest pin-point beam in the industry allows detection
E3X-NL. Employs OMRON's Unique Free Angle Optics Technology for Detecting Minute Differences in Glossiness. Optical Fiber Glossy Object Sensor
Authorised Distributors:- AS & AAIN INDIA PVT TD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) Tel : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Fiber Glossy Object
Class Sealing Fully sealed Contact configuration Rated coil voltage Model Basic Type SPDT 4.5 VDC G6Y-1 5 VDC 9 VDC 12 VDC 24 VDC
Switching Structure Based on the Micro Strip Line is Used to Combine High Performance and Costeffectiveness ROHS compliant. Isolation characteristics of 65 db or better at 900 MHz. Effective insertion
Class II. Sensing method Appearance Connection Sensing distance Output function Model method NPN output PNP output mm.
Distance-settable Photoelectric Sensor FC-AL Distance-settable Photoelectric Sensor with Background Suppression and Visible Laser Beam Reliable background suppression detection, even of shiny objects Detection
HPX-ET Series. Gang-mounted Distributed Remote Cluster Type Fiber Optic Photoelectric Sensors. Specifications. click
6 HPX-ET Series FEATURES Connector Connection Type 16-unit Gang-mounting Sensors Strongly Support the Request for Wiring and Space Savings. Distributed Remote Cluster Arrangement is a New Concept for Designing
Sensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
Coaxial Switch. Ordering Information. High-frequency, High-capacity Coaxial Switch Supporting Bandwidth to 26.5 GHz. Model Number Legend:
Coaxial Switch High-frequency, High-capacity Coaxial Switch Supporting Bandwidth to 26.5 GHz Models supporting bandwidth of 26.5 GHz achieve superior high-frequency characteristics, such as an isolation
E3Z-LS. Distance-settable Photoelectric Sensor. Ordering Information. Sensors. Accessories (Order Separately)
Distance-settable Photoelectric Sensor Switching between background and foreground suppression (BGS/FGS) enables detecting a variety of objects under various background/foreground conditions. Influence
12 V DC ±10 % 150 ma max. 130 ma max. 120 ma max.
96 PHOTO PHOTO ON/OFF Input SERI Related Information General terms and conditions... F-3 General precautions... P.9 MEASURE panasonic.net/id/pidsx/global Multi-functional D rail mounting slim sensor controller
02/11/2015
Standstill monitoring KSW3-JS Part number 85102331 Function "Stillstand detection without sensors" Independent of rotation direction Security with redundancy and feedback circuit 3 forcibly guided "NO"
Online data sheet WT260-R260 W260 PRODUCT PORTFOLIO
Online data sheet WT60-R60 W60 A B C D E F Illustration may differ Ordering information Type Part no. WT60-R60 60097 Other models and accessories www.sick.com/w60 H I J K L M N O P Q R S T Detailed technical