Series HLNA Low Noise Amplifiers
|
|
|
- Sharlene Elliott
- 5 years ago
- Views:
Transcription
1 DESCRIPTION The HLNA Series of covers the frequency ranges from 18 to 110 GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications. Custom designs are available and in many cases NRE is not required. MMIC technology is employed for high reliability and repeatability. The amplifiers can be used to lower system noise figure in communication and radar systems and also as gain blocks in LO chains and test equipment. Low noise amplifier stages can be combined with power amplifier stages for higher P1dB levels. LNAs can also be packaged with other components for custom configurations. Each LNA contains a voltage regulator and bias sequencing circuitry allowing the use of a single bias to power the amplifier. Applications Radar Front Ends Communications Equipment Test Equipment Features Low Noise Figure Multiple Gain / P1dB options High Bandwidth models Single Bias / Internal Regulation Internal Bias Sequencing
2 Low Noise Amplifier Specifications - 14 to 70 GHz This is just a sample listing of available low noise amplifiers. Please choose from these models or contact factory with your requirements. Please identify your required frequency range with any inquiry. Model Number Frequency Range (GHz) Input/Output Noise Figure (db) P 1dB (dbm) HLNAKK mm, Female HLNAKK mm, Female HLNAAK mm, Female HLNAKK mm, Female HLNAAK mm, Female HLNAA WR-28 / UG- 599/U HLNAAK mm, Female HLNAA WR-28 / UG-599/U HLNAA WR-28 / UG-599/U HLNAAK mm, Female HLNAAK mm, Female HLNAAK mm, Female HLNAB WR-22 / UG-599/U-M HLNAV WR-15 / UG-385/U HLNAVC mm, Female HLNAVC mm, Female HLNAV WR-15 / UG-385/U HLNAV WR-15 / UG-385/U HLNAV WR-15 / UG- 385/U HLNAVC mm, Female HLNAV WR-15 / UG-385/U See next page for LNAs above 70 GHz C T CASE, Specifications subject to change w/o notice.
3 Low Noise Amplifier Specifications - 70 to 100+ GHz This is just a sample listing of available low noise amplifiers. Please choose from these models or contact factory with your requirements. Please identify your required frequency range with any inquiry. Model Number Frequency Range (GHz) Input/Output Noise Figure (db) P 1dB (dbm) HLNAE WR-12 / UG-387/U HLNAE WR-12 / UG- 387/U HLNAE WR-12 / UG-387/U HLNAE WR-12 / UG-387/U HLNAE WR-12 / UG-387/U HLNAE WR-12 / UG-387/U HLNAE WR-12 / UG-387/U HLNAW WR-10 / UG-387/U-M HLNAW WR-10 / UG-387/U-M HLNAW WR-10 / UG-387/U-M HLNAW WR-10 / UG-387/U-M HLNAW WR-10 / UG-387/U-M HLNAW WR-10 / UG-387/U-M C T CASE, Specifications subject to change w/o notice.
4 Typical Gain Data for HLNA V-Band Low Noise Amplifier Gain HLNAV GHz Low Noise Amplifier Gain HLNAE Noise Figure = 4.5 db Frequency (GHz) Noise Figure = 5.5 db Frequency (GHz) W-Band Low Noise Amplifier Gain HLNAW Noise Figure = 6.0 db Frequency (GHz)
5 Low Noise Amplifier Outlines Coaxial Low Noise Amplifier Q-Band (B-Band, WR-22) Low Noise Power Amplifier (Outline is also valid for Ka-Band,WR-28.)
6 Low Noise Amplifier Outlines V-Band (WR-15) Low Noise Amplifier E-Band (WR-12) Low Noise Amplifier
7 Low Noise Amplifier Outlines W-Band (WR-10) Low Noise Amplifier Requesting Quotes When requesting a quote for HLNA, please specify required frequency range and any other required specifications. HLNA amplifiers are built to order and will be optimized for the bandwidth specified by the customer. The part number guide below can also be used as a reference for requesting quotes. HLNA V - XXX Assigned by factory Frequency Band HXI Model # Interface Options SMA female connectors available to 20 GHz. 2.9 mm connectors also available through 40 GHz. V-Connectors available through 65 GHz.
Series HMPA and HHPA Power Amplifiers
DESCRIPTION The HMPA and HHPA Series of cover the frequency range from 18 100 GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications.
Series HAFM Active Frequency Multipliers
DESCRIPTION The HAFM Series of active multipliers is available in models ranging from 30 to 100 GHz. A wide variety of multiplication factors from X2 up to X6 provide the customer with design flexibility
SERIES LNA LOW NOISE AMPLIFIERS DESCRIPTION. Millimeter-Wave Technology & Solutions
LOW NOISE AMPLIFIERS FEATURES: Wideband coverage Modular compact design Military or commercial units available 2.92, 2.4, 1.85 mm or Waveguide interfaces as required Internal voltage regulation and bias
Features. = +25 C, +Vdc = +6V, -Vdc = -5V
v3.7 WIDEBAND LNA MODULE, - 2 GHz amplifiers Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Industrial Sensors Functional
Terabeam/HXI Millimeter Wave Product Availability
Terabeam/HXI was founded as Harmonix Corporation in 1992. The company was a pioneer in the development of 60 GHz, high data rate communication links between buildings where connection to fiber was not
Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:
Features. = +25 C, +Vdc = +6V, -Vdc = -5V
HMC-C59 v.59 WIDEBAND LNA MODULE, - 2 GHz Typical Applications The HMC-C59 Wideband LNA is ideal for: Telecom Infrastructure Features Noise Figure:.8 db @ 8 GHz High Gain: 6 db @ 8 GHz PdB Output Power:
Features. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -7 dbc/hz @ khz Noise Figure: 6 db Gain:
Features. Gain Variation Over Temperature db/ C
HMC-C26 Features Typical Applications The HMC-C26 Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain: 3 db
Clarke & Severn Electronics Ph
Clarke & Severn Electronics Ph +612 9482 1944 Email sales@clarke.com.au www.cseonline.com.au POWER AMPLIFIER FPA-22-0001 - 43-46GHz FPA-15-0001- 55-65GHz FPA-12-0001- 71-77GHz FPA-10-0003 - 75-110GHz FPA-10-0004
FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:
FMAM432 1 MHz to 6 GHz, Medium Power Broadband Amplifier with 9 mw, 24 db Gain and SMA FMAM432 two stage amplifier operates across a wide frequency range from 1 MHz to 6 GHz The design utilizes GaAs PHEMT
Features. = +25 C, Vs= +8V to +16V
v2.17 Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features Electrical Specifications,
SERIES MXP BALANCED MIXERS FEATURES: APPLICATIONS: DESCRIPTION
BALANCED MIXERS FEATURES: Low conversion loss and noise figure 13 dbm LO drive power Matched IF amplifier and LO offered Small, rugged package APPLICATIONS: DESCRIPTION Millitech series MXP balanced mixers
SERIES AMC ACTIVE MULTIPLIER CHAIN FEATURES: APPLICATIONS: DESCRIPTION. Millimeter-Wave Technology & Solutions
ACTIVE MULTIPLIER CHAIN FEATURES: Full waveguide bandwidths Optional Removable Heatsink Compact package APPLICATIONS: LO source for up/down converters Frequency extenders DESCRIPTION Millitech s line of
SERIES DET GENERAL PURPOSE DETECTORS DESCRIPTION. Millimeter-Wave Technology & Solutions
GENERAL PURPOSE DETECTORS FEATURES: Full waveguide bandwidth High sensitivity No tuning required Zero bias APPLIC ATIONS: Instrumentation Power monitoring DESCRIPTION Millitech series DET detectors, utilizing
CTT Technical Proposal
CTT Technical Proposal 6-1 GHz 0 W Power Amplifier (GaAs and GaN approaches) SECTION 1: 6-1 GHz 0 W power amplifiers A) Specification and comparison SECTION 2: GaAs 6-1 GHz Solid State Power Amplifier
and GHz. ECE Radiometer. Technical Description and User Manual
E-mail: sales@elva-1.com http://www.elva-1.com 26.5-40 and 76.5-90 GHz ECE Radiometer Technical Description and User Manual November 2008 Contents 1. Introduction... 3 2. Parameters and specifications...
BROADBAND DISTRIBUTED AMPLIFIER
ADM1-26PA The ADM1-26PA is a complete LO driver solution for use with all Marki mixers up to 26. GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
SPA SMA DATA SHEET
43 db Gain Medium Power High Gain Amplifier at 3 Watt P1dB Operating From 14.4 GHz to 15.4 GHz with 41 dbm IP3 and SMA SPA-154-43-03-SMA is a 3 Watt Ku Band high gain power coaxial amplifier operating
0.5-4GHz Low Noise Amplifier
.5-4GHz Low Noise Amplifier Features Frequency Range:.5-4 GHz Better than 2.dB Noise Figure Single supply operation db Nominal Gain dbm Nominal P1dB Input Return Loss > db Output Return Loss > db DC decoupled
0.5-4GHz Low Noise Amplifier
ASL P3.5-4GHz Low Noise Amplifier Features Frequency Range:.5-4 GHz Better than 2.dB Noise Figure Single supply operation db Nominal Gain dbm Nominal P1dB Input Return Loss > db Output Return Loss > db
Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
Features. = +25 C, Vdc = +5V
amplifiers Typical Applications The HMC-C is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram v.7 HMC-C Features Ultra Low Phase Noise: -6 dbc/hz @ khz Noise Figure:
SERIES PLS PHASE LOCKED SYNTHESIZER. FEATURES: Small Size, Low Cost, Simple to use Low Phase Noise Auto-sensing Internal or External 10MHz Reference
PHASE LOCKED SYNTHESIZER FEATURES: Small Size, Low Cost, Simple to use Low Phase Noise Auto-sensing Internal or External 10MHz Reference Can be utilized as a synthesizer, or a fixed frequency oscillator
Ka Band Radar Transceiver
Ka Band Radar Transceiver Ka-Band Radar Transceiver with Integrated LO Source Homodyne System with Integrated TX & LO Multiplied VCO with Phase noise
Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz Insertion Loss* db. Input Return Loss* 10 db
v4.711 HMC-C Features Low RMS Phase Error: Low Insertion Loss: 7 db Excellent Flatness 3 Coverage, LSB = 22. Hermetically Sealed Module Field Replaceable SMA Female Connectors Typical Applications The
AM002535MM-BM-R AM002535MM-FM-R
AM002535MM-BM-R AM002535MM-FM-R December 2008 Rev. 1 DESCRIPTION AMCOM s AM002535MM-BM-R is part of the GaAs MMIC power amplifier series. It has 24 db gain, 34 dbm output power over most of the 0.03 to
Amplifier Systems. Ultra Low Noise LNAs. Back to. C-band LNAs X-band LNAs Ku-band LNAs
R Back to Amplifier Systems Ultra Low Noise LNAs C-band LNAs X-band LNAs Ku-band LNAs 100 Davids Drive Hauppauge NY 11788 631-436-7400 Fax: 631-436-7431 www.miteq.com AMFW SATCOM AMPLIFIER SERIES ULTRA
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
![Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]](/thumbs/94/119028866.jpg "Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]")
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
S Band 7 Bit Digital Attenuator
S Band 7 Bit Digital Attenuator Features Frequency Range: 2.8-3.8 GHz Low Insertion Loss 4 db(typ.) Max. Attenuation of 31.75 db RMS Amplitude Error < 0.3 db Input & Output Return Loss > 12 db 32 Lead
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier December 2012 Rev0 DESCRIPTION AMCOM s AM357039WM is a broadband GaAs MMIC Power Amplifier. It has a nominal CW performance of 21dB small signal gain, and 38.5dBm (7W) saturated
PCS Base Station High output power, P1dB = 38 dbm. GPS Applications High gain > 20 db. WLAN Repeaters Efficiency > 30%
AM143438WM-BM-R AM143438WM-FM-R DESCRIPTION AMCOM s AM143438WM-BM-R and AM143438WM-FM-R are part of the GaAs HiFET MMIC power amplifier series. These high efficiency MMICs are 2-stage GaAs phemt power
GaAs MMIC Double Balanced Mixer. Description Package Green Status
GaAs MMIC Double Balanced Mixer MM1-0212SSM 1. Device Overview 1.1 General Description The MM1-0212SSM is a highly linear GaAs MMIC double balanced mixer. MM1-0212SSM is a low frequency, high linearity
900 MHz Antenna Sharing Combiner ASC900VG11A
DATA SHEET Small, lightweight, outdoor unit Dual Technology Combiner (GSM 900 / UMTS 900) Can also be used for same technology (e.g. GSM/GSM) Can be used close to Antenna Can be used in Ground Based Applications
FMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:
FMAM13 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA The FMAM13 is a low phase noise amplifier that operates across the frequency range from 3 GHz
850 MHz Antenna Sharing Combiner ASC850VG12A
DATA SHEET Small, lightweight, outdoor unit Dual Technology Combiner (GSM 850 / UMTS 850) Can also be used for same technology (e.g. GSM/GSM) Can be used close to Antenna Can be used in Ground Based Applications
AWS Antenna Sharing Combiner
DATA SHEET Small, lightweight, outdoor unit Multi-Technology Combiner (GSM/UMTS/CDMA/LTE AWS Band) Can also be used for same technology (e.g. UMTS/UMTS or LTE/LTE) Can be used close to Antenna Can be used
FREQUENCY MULTIPLIERS
MULTIPLIERS A series of broadband frequency multipliers is available with output frequencies between 18 and 110 GHz. The use of GaAs diodes on a suspended substrate circuit allows an extremely compact
Low Power GaAs MMIC Double Balanced Mixer. Refer to our website for a list of definitions for terminology presented in this table.
Low Power GaAs MMIC Double Balanced Mixer MM1-0212LSM 1. Device Overview 1.1 General Description The MM1-0212LSM is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1
FREQUENCY MULTIPLIERS
FREQUENCY MULTIPLIERS ISO 9001 REGISTERED COMPANY PASSIVE AND ACTIVE Doublers Triplers Higher-Order Products TABLE OF CONTENTS CONTENTS PAGE INTRODUCTION 2 TECHNICAL OVERVIEW 2 Technical Discussion 3 Design
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37
AMT-A0246 4 GHz to 8 GHz Broadband LNA with 5 W Protection Limiter Data Sheet Features 4 GHz to 8 GHz Frequency Range +37 dbm (5W) CW Pin survival Gain 28 db Typical Gain Flatness ± 0.6 db Typical 2.2
Product Datasheet Revision: April Applications
Applications Wide Bandwidth Millimeter-wave Imaging RX Chains Sensors Radar Short Haul / High capacity Links X=34 mm Y=16 mm Product Features RF Frequency: 8 to 1 GHz effective bandwidth: Linear Gain (average
Features. = +25 C, Vdd = 5V
v3.117 HMC1LH5 Typical Applications The HMC1LH5 is a medium PA for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Gain: 5 db Saturated
Millimeter Wave Product Catalogue VivaTech Consulting S.A.R.L.
VivaTech Consulting S.A.R.L. sales@vivatech.biz Telephone: +33 04 89 01 14 61 Fax: +33 04 93 87 08 66 Table of Contents Millimeter Wave Low Noise Amplifiers VTLNA Series...3 Millimeter Wave Power Amplifiers
Features. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
Bandwidth Radar Receivers
Analog Optical Links for Wide Bandwidth Radar Receivers Sean Morris & Brian Potts MQP Presentation Group 33 14 October 29 This work was sponsored by the Space and Missile Systems Center, under Air Force
Features. = +25 C, Vdd= 5V, Vgg2= Open, Idd= 60 ma*
v.7 HMCLH AGC AMPLIFIER, - GHz Typical Applications The HMCLH is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C I Test Instrumentation Fiber Optics Functional Diagram Features
GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.
The is a broadband, power efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. The is designed to provide optimal LO drive for T3 mixers. Typically, ADM-26-2931SM provides. db
Features. = +25 C, Vdd= 8V, Idd= 75 ma*
HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation
Microwave. Accessories for Microwave Scalar and System Analyzers
Microwave Accessories for Microwave Scalar and System Analyzers The following optional accessories are designed for use with the 6200B series of Microwave Test Sets, the 6820 series Scalar Analyzers and
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
RF over Fiber Optic Transceiver OZ816 Series Ultra Broadband 6 GHz
FEATURES 30 MHz to 6.0 GHz Bandwidth Approx Size: 3 x 5 x 1.25 in. Weight ¾ pound 40 C to +5 C Operating Temperature LD/PD Monitoring & Alarm High Spurious Free Dynamic Range Automatic Optical Power Control
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
Parameter Min. Typ. Max. Units
v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a
GHz Low Noise Amplifier
8.0-12.0 GHz Low Noise Amplifier Features Frequency Range : 8.0-12.0 GHz Low Noise Figure < 1.7 db 26 db nominal gain 12 dbm P 1dB High IP3 Input Return Loss > 10 db Output Return Loss > 10 db DC decoupled
Pre-Filtered GPS LNA (Low Noise Amplifier)
Pre-Filtered GPS LNA (Low Noise Amplifier) Designed to amplify GPS signals while protecting the GPS receiver by filtering out interferers Features Pre-Filtered Low Noise Figure, 1.8 db Typical Wide Input
HILNA V1 Low Noise Amplifier
HILNA V1 Low Noise Amplifier 50-1000 MHz db Gain P/N: HILNA-V1 (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA V1 is the first in its class of broadband low noise amplifiers designed to achieve
GHz SUPER LOW NOISE PACKAGED AMPLIFIER WHM0510AE 1
.5-1. GHz SUPER LOW NOISE PACKAGED AMPLIFIER WHM51AE 1 WHM51AE LNA is a super low noise figure, wideband, and high linear amplifier. The amplifier offers.4 db exceptional low noise figure, 38. db gain,
Additional heat sink required!
8-850 MHz SUPER LOW NOISE AMPLIFIER WLA08-45A 1 WLA08-45A LNA is a super low noise figure, medium power, and high linearity amplifier with unconditional stable. The amplifier offers the exceptional noise
Small Integrated Transmitter Unit SITU2400-XZ
Small Integrated Transmitter Unit SITU2400-XZ 0.05 1 GHz, ITU-Grid DWDM Directly Modulated Self-Contained Transmitter Applications Cellular and PCS Antenna- Remoting Microwave Delay Lines Frequency Distribution
GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.
ADM-26-931SM The ADM-26-931SM is a broadband, power efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. The ADM-26-931SM is designed to provide optimal LO drive for T3 mixers.
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier AM324036WM-BM-R AM324036WM-FM-R Aug 10 Rev 6 DESCRIPTION AMCOM s is part of the GaAs MMIC power amplifier series. It has 29dB gain and 36dBm output power over the 3.2 to 4.0GHz
GHz LOW NOISE AMPLIFIER WHM AE 1
.. GHz LOW NOISE AMPLIFIER WHM-AE WHM-AE LNA is a low noise figure, wideband, and high linearity SMT packaged amplifier. The amplifier offers typical noise figure of.9 db and output IP of. dbm at the frequency
GaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.
ADM-26-929SM The ADM-26-929SM is a broadband, efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. It is designed to provide optimal LO drive for T3 mixers and offers 13 db typical
Features = +5V. = +25 C, Vdd 1. = Vdd 2
v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier December 2012 Rev0 DESCRIPTION AMCOM s AM357037WM is a broadband GaAs MMIC Power Amplifier. It has a nominal CW performance of 26dB small signal gain, and 37dBm (5W) saturated
Gallium Nitride MMIC Power Amplifier
Gallium Nitride MMIC Power Amplifier August 2015 Rev 4 DESCRIPTION AMCOM s is an ultra-broadband GaN MMIC power amplifier. It has 21dB gain, and >41dBm output power over the 0.03 to 6GHz band. This MMIC
Features. = +25 C, Vdd = +4V, Idd = 90 ma [2]
![Features. = +25 C, Vdd = +4V, Idd = 90 ma [2]](/thumbs/89/98833557.jpg "Features. = +25 C, Vdd = +4V, Idd = 90 ma [2]")
v.91 HMCLCB AMPLIFIER, 1-27 GHz Typical Applications This HMCLCB is ideal for: Features Noise Figure: 2.2 db @ 2 GHz Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation
HILNA GPS Low Noise Amplifier
HILNA GPS Low Noise Amplifier 1200-1600 MHz 32 db Gain P/N: HILNA-GPS (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA GPS is a broadband low noise amplifier designed to achieve high gain while
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier AM1327MM-BM-R AM1327MM-FM-R Aug 2010 Rev 2 DESCRIPTION AMCOM s is part of the GaAs HiFET MMIC power amplifier series. It is a 2-stage GaAs HIFET MESFET MMIC power amplifier biased
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier AM14344WM-BM-R AM14344WM-FM-R Aug Rev DESCRIPTION AMCOM s is part of the GaAs HiFET MMIC power amplifier series. This high efficiency MMIC is a 2-stage GaAs phemt power amplifier
ULTRA BROADBAND RF over FIBER Transceiver OZ1606 Series Premium Grade 6 GHz
FEATURES 30 MHz 6.0 GHz Bandwidth Rugged Dust tight Cast Metal housing, 3 x 5 x 1.25 @ ¾ lb 20 C to +65 C T OP Range LD Bias, LD Power and PD Monitoring and Alarms High SFDR Typically 113 (db/hz) 2/3 at
Universal/Standard Ku-band 8W BUC MODEL No. NJT8318 series
< Features > * High Temperature Operating Operation Guarantee Temperature Range: * Monitor & Control Line-up FSK Communication RS-232C Interface Serial < Line-Up > -40 to +75 C * RF Frequency Line-up Universal
6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773ALC3B
FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input
HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
1:1 AND 1:2 REDUNDANT LOW-NOISE AMPLIFIER SYSTEMS
FEATURES Low amplifier noise temperature Fully redundant power supplies Remote control via RS485 matic/manual control from both local and remote mode Remote status Off-line input/output access Amplifier
HMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality:
1-24 GHz Distributed Driver Amplifier
Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Description The CMD197C4 is a wideband GaAs MMIC driver amplifier housed in a leadless
Features. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
SHF Communication Technologies AG. Wilhelm-von-Siemens-Str. 23D Berlin Germany. Phone Fax
SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23D 12277 Berlin Germany Phone +49 30 772051-0 Fax ++49 30 7531078 E-Mail: sales@shf.de Web: http://www.shf.de Datasheet SHF 100 BPP Broadband
RS3400W/04 77 GHz Radar Sensor
Features Complete 76-77GHz band FMCW Radar Front End Synthesized frequency source Wideband Sweep Description The RS34W/4 is a W-band FMCW radar front end featuring synthesized frequency sweeps. A fast
HILNA LS Low Noise Amplifier
HILNA LS Low Noise Amplifier 1000-3000 MHz 50 db Gain P/N: HILNA-LS (includes NW-LN-ACC-CB4MUA interface cable) NuWaves HILNA LS is a broadband low noise amplifier covering L- & S-bands, and designed to
A GSM Band Low-Power LNA 1. LNA Schematic
A GSM Band Low-Power LNA 1. LNA Schematic Fig1.1 Schematic of the Designed LNA 2. Design Summary Specification Required Simulation Results Peak S21 (Gain) > 10dB >11 db 3dB Bandwidth > 200MHz (
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10
AMT-A0112 11 GHz to 18 GHz Broadband Low Noise Amplifier Data Sheet Features 11 GHz to 18 GHz Frequency Range Typical Noise Figure < 1.4 db Typical Gain 40 db Gain Flatness < ± 2 db +14 dbm P1dB Internally
SHF Communication Technologies AG. Wilhelm-von-Siemens-Str. 23D Berlin Germany. Phone / Fax /
SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23D 12277 Berlin Germany Phone ++49 30 / 772 05 10 Fax ++49 30 / 753 10 78 E-Mail: sales@shf.de Web: http://www.shf.de Datasheet SHF 826H Broadband
Features. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
SHF Communication Technologies AG
SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23 Aufgang D 12277 Berlin Marienfelde Germany Phone ++49 / 772 05 10 Fax ++49 / 753 10 78 E-Mail: sales@shf.biz Web: http://www.shf.biz Datasheet
Features. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
9-10 GHz LOW NOISE AMPLIFIER
9-10 GHz LOW NOISE AMPLIFIER Features Frequency Range 9-10GHz Low Noise Figure < 1.38 db High Gain 28 ± 0.4dB Input Return Loss > 10dB. Output Return Loss > 13dB. 10 dbm is Nominal P1dB 20 dbm OIP3 No
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
Features. = +25 C, Vdd =+28V, Idd = 850 ma [1]
![Features. = +25 C, Vdd =+28V, Idd = 850 ma [1]](/thumbs/87/97234843.jpg "Features. = +25 C, Vdd =+28V, Idd = 850 ma [1]")
v1.413 HMC87F POWER AMPLIFIER, 2 - GHz Typical Applications The HMC86F is ideal for Test Instrumentation General Communications Radar Functional Diagram Features High Psat: +38. dbm Power Gain at Psat:
SDA SMA DATA SHEET
0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with
AM003536WM-BM-R AM003536WM-FM-R
AM0036WM-BM-R AM0036WM-FM-R DESCRIPTION AMCOM s is an ultra broadband GaAs MMIC power amplifier. It has 23 db gain, and 36 dbm output power over the 0.01 to 3.5 GHz band. This MMIC is in a ceramic package
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20
AMT-A0142 1 GHz to 18 GHz Broadband Medium Power with Low Noise Amplifier Data Sheet Features 1 GHz to 18 GHz Frequency Range Typical P1dB power > +23 dbm Gain 18 db Typical Gain Flatness ± 1 db Typical
Features. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V
![Features. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V](/thumbs/90/101370216.jpg "Features. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V")
Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.
2-20 GHz Driver Amplifier
2-2 GHz Driver Amplifier Features Functional Block Diagram Wide bandwidth High linearity Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD187C4 is a wideband driver
GaAs, phemt, MMIC, Low Noise Amplifier, 0.3 GHz to 20 GHz HMC1049LP5E
ACG ACG ACG FEATURES Low noise figure:. db PdB output power:. dbm PSAT output power: 7. dbm High gain: db Output IP: 9 dbm Supply voltage: VDD = 7 V at 7 ma Ω matched input/output (I/O) -lead, mm mm LFCSP
Standard C-band 10W BUC MODEL No. NJT5762 series
< Features > * High Efficiency & Low Distortion P1dB: +40 dbm min. over temperature IM3: -28 dbc @ Pout = +37 dbm Power Consumption: 69 W * Compact Size & Light Weight Weight: 3.2kg * AC Power Option *
Picture. Parameter Unit Minimum Typical Maximum. Fin and Ref Input Frequency Range MHz Input Power Level dbm
eatures requency Range: 3 to 300MHz Input Power: -10 to +17dBm Integrated Loop ilter Directly Interface to PS Series Directly Interface to VCO Series DC Power: 12V SMA Connector Picture is a Phase/requency