PowPak 20 A Relay Module

Size: px

Start display at page:

Download "PowPak 20 A Relay Module"

Jane Payne
5 years ago
Views:

1 PowPak 20 A Relay Modle The PowPak 20 A Relay Modle is a radio-freqency (RF), receptacle switching soltion that is capable of controlling 20 A receptacles based on inpt from Pico wireless controls and Radio Powr Savr occpancy sensors a Commnication with RF inpt devices, sch as Pico wireless controls and / or Radio Powr Savr occpancy / vacancy sensors, is accomplished sing Ltron Clear Connect RF Technology. Receptacle load control is provided sing technology from Hbbell Wiring Device - Kellems. Featres Able to control 20 A receptacles Wide operating voltage V~ Capable of switching general-prpose loads Receives wireless inpts from a total of ten wireless controls maximm (Pico wireless controls or Radio Powr Savr occpancy/vacancy sensors) Utilizes Ltron Clear Connect RF Technology Monts to a U.S. style jnction box throgh a standard size knockot Complies with reqirements for se in a compartment handling environmental air (plenm) per NEC (C)(3) Heavy dty mechanically held, latching relays, with silver alloy contacts ULR / cul listed Zero cross switching Incldes reqired controlled otlet labels for code compliance Provides a fail safe mechanism to trn on the otpt in the event of a missing sensor BAA compliant RMJ-H20R-DV-B Model Nmbers Description Model Nmber Region Operating Voltage PowPak 20 A Relay Modle RMJ-H20R-DV-B U.S.A., Canada (BAA compliant) Freqency Band V~ MHz

2 Specifications a Reglatory Approvals ULR Listed (USA) UL 2043 Plenm Rated (USA) FCC approved. Complies with the limits for a Class B device, prsant to Part 15 of the FCC rles. (USA) cul and IC (Canada) Power Operating voltage: V~ 50/60 Hz Standby Power Consmption (all models): < 1.25 W System Commnication Operates sing Clear ConnectR RF Technology for reliable wireless commnication. RF range is 30 ft (9 m) Contact Ltron first for applications sing foil-backed or metallic ceiling tiles. Environment Ambient operating temperatre: 32 F to 104 F (0 C to 40 C) 0% to 90% hmidity, non-condensing For indoor se only Load 20 A; No minimm load reqirements. Load types inclde (bt are not limited to): Incandescent, MLV, ELV, Resistive, Indctive Motor rating: 1.0 HP (120 V~), 2.0 HP ( V~) Able to control 20 A receptacles The 20 A Relay Modle may be sed with, bt is not limited to, the following: Monitors Fans Hmidifiers Printers Note: Refer to the manfactrer s gidelines for acceptable switching methods. The 20 A Relay Modle may NOT be sitable for se with devices that reqire any of the following: Sht-down process before power is interrpted, sch as compters. Cool-down process before power is interrpted, sch as projectors. Programming, sch as clocks or DVRs. Long warm-p cycle. Not for se with loads that present a hazard if atomatically energized. For example, heaters. Any receptacles that are controlled by an atomatic control device mst be marked with located on the controlled receptacle otlet where visible after installation as stated in 2014 NECR Article 406.3(E). Key Design Featres LED stats indicator shows crrent load stats and provides programming feedback Power failre memory: If power is interrpted, connected receptacles will retrn to the state prior to the power interrption. Zero cross switching Heavy-dty relays

3 Test PowPak 20 A Relay Modle Energi TriPak Series Wireless Receptacle Control Dimensions Dimensions are shown as: in (mm) 1/2 in (13 mm) trade size knockot opening a (102) 3.23 (82) 2.40 (61) 1.73 (44) Range Diagrams PowPak 20 A Relay Modle Install in center of room to maximize RF coverage. Radio Powr Savr Occpancy Sensor 30 ft (9 m) Maximm Pico Wireless Transmitter 30 ft (9 m) 40 ft (12 m) All Wireless Transmitters mst be installed within 30 ft (9 m) of the PowPak 20 A Relay Modle. Contact Ltron first for applications sing foil-backed or metallic ceiling tiles.

4 System Diagram a To power sorce and load PicoR Wireless Control Radio Powr SavrT Occpancy Sensor * Total of ten wireless devices maximm Defalt Operation Transmitting Device Transmitted Command Relay Defalt Action Pico On Wireless Control Off Open Raise No Action Lower No Action Preset Radio Powr SavrT Occpied Occpancy Sensor Unoccpied Open Radio Powr SavrT Occpied Vacancy Sensor Unoccpied Open Note: Unaffected Mode allows a system with an Occpancy sensor associated to mltiple relay modles to be set p sch that only selected loads trn on atomatically. Other loads will reqire a manal trn-on with a Pico wireless control. All loads will trn off atomatically when the room is vacated. See the PowPak 20 A Relay Modle installation gide for more information on Unaffected Mode.

5 Wiring Diagram - for Dplex Receptacle a Jnction Box LINE / HOT (L) NEUTRAL (N) SWITCHED LINE / HOT ATTENTiON Installer Any receptacles that are controlled by an atomatic control device mst be marked with located on the controlled receptacle otlet where visible after installation as stated in 2014 NECR Article 406.3(E). Controlled 20 A Receptacle * Uncontrolled 20 A Receptacle Note: The 20 A Relay Modle is also capable of controlling V~ lighting and receptacles. Receptacle wiring diagram shown. * Important Note WARNING - Entrapment / Fire Hazard - To avoid the risk of entrapment, serios injry, or death, these controls mst not be sed to control eqipment which is not visible from every control location or which cold create hazardos sitations sch as entrapment if operated accidentally. Examples of sch eqipment which mst not be operated by these controls inclde (bt are not limited to) motorized gates, indstrial doors, space heaters, etc. It is the installer s responsibility to ensre that the eqipment being controlled is visible from every control location and that only sitable eqipment is connected to these controls. Failre to do so cold reslt in serios injry or death.

6 Wiring Diagram - for Split-Wired Dplex Receptacle a Jnction Box LINE / HOT (L) NEUTRAL (N) NEUTRAL (N) SWITCHED LINE / HOT ATTENTiON Installer Any receptacles that are controlled by an atomatic control device mst be marked with located on the controlled receptacle otlet where visible after installation as stated in 2014 NECR Article 406.3(E). 20 A Split-Wired Receptacle. * Note: This example is showing a split-wired receptacle. The top portion of the receptacle is not controlled by the 20 A Relay Modle, while the bottom portion is switched by the 20 A Relay Modle. Note: The 20 A Relay Modle is also capable of controlling V~ lighting and receptacles. Receptacle wiring diagram shown. * Important Note WARNING - Entrapment / Fire Hazard - To avoid the risk of entrapment, serios injry, or death, these controls mst not be sed to control eqipment which is not visible from every control location or which cold create hazardos sitations sch as entrapment if operated accidentally. Examples of sch eqipment which mst not be operated by these controls inclde (bt are not limited to) motorized gates, indstrial doors, space heaters, etc. It is the installer s responsibility to ensre that the eqipment being controlled is visible from every control location and that only sitable eqipment is connected to these controls. Failre to do so cold reslt in serios injry or death.

PowPak 20 A Receptacle Control Relay Module

PowPak 20 A Receptacle Control Relay Module PowPak Receptacle Control Relay Modle The PowPak Relay Receptacle Control Modle is a radio-freqency (RF), receptacle switching soltion that is capable of controlling receptacles based on inpt from Pico