POW-R-BLOK TM Dual Diode Isolated Module 600 Amperes / Up to 2400 Volts. LD41 60 Dual Diode POW-R-BLOK TM Module 600 Amperes / Volts
|
|
- Lilian Rich
- 5 years ago
- Views:
Transcription
1 LD Amperes / Up to 24 Volts R E OUTLINE DRAWING J 3 3 L Q - DIA. (4 TYP.) 2 B C F A 2 CONNECTION DIAGRAM H 1 P - M1 THD (3 TYP.) S N K M 1 G D LD41 6 Dual Diode Module 6 Amperes / 8-24 Volts LD41 Outline Dimensions Dimension Inches Millimeters A B C D E F G H J Description: Powerex Dual Diode Modules are designed for use in applications requiring rectification and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. has been tested and recognized by the Underwriters Laboratories. Features: Electrically Isolated Heatsinking Aluminum Nitride Isolator Compression Bonded Elements Metal Baseplate Low Thermal Impedance for Improved Current Capability UL Recognized Benefits: No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Ordering Information: Select the complete eight-digit module part number from the table below. Example: LD41246 is a 24V, 6 Ampere Dual Diode Isolated Module. K L M N P M1 Metric M1 Q.26 Dia. 6.5 Dia. R Applications: Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends S Type Voltage Volts (x1) Current Amperes (x1) T.11 x x.8 Note: Dimensions are for reference only. LD to 24 6 Revision Date: 2/29/28
2 LD Amperes / Up to 24 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Reverse Blocking Voltage V RRM up to 24 V Non-Repetitive Peak Reverse Blocking Voltage V RSM V RRM + 1 V (t < 5 msec) RMS Forward Current I F(RMS) 95 A Average Forward Current 18 Conduction, T C =16 C I F(AV) 6 A Peak One Cycle Surge Current, Non-Repetitive 6 Hz, 1% V RRM reapplied 5 Hz, 1% V RRM reapplied I FSM I FSM A A Peak Three Cycle Surge Current, Non-Repetitive 6 Hz, 1%V RRM reapplied I FSM 15,5 A Peak Ten Cycle Surge Current, Non-Repetitive 6 Hz, 1% V RRM reapplied I FSM 13, A I 2 t for Fusing for One Cycle 8.3 milliseconds 1 milliseconds I 2 t I 2 t 1,84, 1,81, A 2 sec A 2 sec Operating Temperature T J -4 to +15 C Storage Temperature T stg -4 to +15 C Max. Mounting Torque, M6 Mounting Screw 55 6 in. Lb. Nm Max. Mounting Torque, M1 Terminal Screw in. Lb. Nm Module Weight, Typical 15 g 3.3 lb V 25C V rms 3 V Revision Date: 2/29/28
3 LD Amperes / Up to 24 Volts Electrical Characteristics, T J =25 C unless otherwise specified Characteristics Symbol Test Conditions Min. Max. Units Repetitive Peak Reverse Leakage Current I RRM Up to 24V, T J =C 4 ma Peak On-State Voltage V FM T J =C, I FM =18A 1.19 V Threshold Voltage, Low-level Slope Resistance, Low-level Threshold Voltage, High-level Slope Resistance, High-level V TM Coefficients, Full Range V (TO)1 r T1 V (TO)2 r T2 T J = C, I = 15%I F(AV) to πi F(AV) T J = C, I = πi F(AV) to I FSM T J = C, I = 15%I F(AV) to I FSM V TM = A+ B Ln I +C I + D Sqrt I A = B = C = D = 5.5E E E E-3 V mω V mω Thermal Characteristics Characteristics Symbol Max. Units Thermal Resistance, Junction to Case R ΘJ-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients Z ΘJ-C Z ΘJ-C = K 1 (1-exp(-t/τ 1 )) + K 2 (1-exp(-t/τ 2 )) + K 3 (1-exp(-t/τ 3 )) + K 4 (1-exp(-t/τ 4 )) K 1 = 8.3E-4 K 2 = 1.3E-2 K 3 = 1.64E τ 1 = 3.39E-4 τ 2 = 3.15E-3 τ 3 = 1.6E-1 K 4 = 3.75E-2 τ 4 = 2.66 Thermal Resistance, Case to Sink Lubricated R ΘC-S Per Module.1 C/W C/W C/W Revision Date: 2/29/28
4 LD Amperes / Up to 24 Volts 5. Maximum On-State Forward Voltage Drop ( Tj = 15 C ).7 Maximum Transient Thermal Impedance (Junction to Case) On-State Voltage - Vfm - Volts Thermal Impedance - Zjc - C/W Instantaneous On-State Current - Ifm - Amperes Time - t - Seconds Max. Power Dissipation Per Diode - Watts Maximum On-State Power Dissipation (Sinusoidal Waveform) Max. Case Temperature - Tcase - C Maximum Allowable Case Temperature (Sinusoidal Waveform) Max. Power Dissipation Per Diode - Watts Maximum On-State Power Dissipation (Rectangular Waveform) Max. Case Temperature - Tcase - C Maximum Allowable Case Temperature 3 (Rectangular Waveform) Revision Date: 2/29/28
5 LD Amperes / Up to 24 Volts LD41 6 Reverse Recovery Current IR(Rec) (A) Tj=C IFM=1A VR=5V di/dt Rate (A/µsec) Revision Date: 2/29/28
6 LD Amperes / Up to 24 Volts 4 Powerex LD41--6 Pow-R-Blok 6-Pulse Bridge Rth S-A (C/W) Total Power Dissipation vs Maximum Rated Output Current Total Power Dissipation (W) Total Power Dissipation (W) Ambient Temperature (C) Maximum Bridge Output Current (A) Six-Pulse Bridge Circuit Total Power Dissipation & Maximum Rated Output Current With Sink to Ambient Resistance of Heatsink as a Parameter. Revision Date: 2/29/28
POW-R-BLOK TM Single Diode Isolated Module 600 Amperes / Up to 2400 Volts. LS41 60 Single Diode POW-R-BLOK TM Module 600 Amperes / Volts
LS41 6 6 mperes / Up to 24 Volts CONNECTION DIGRM OUTLINE DRWING D G H E B J "P" "Q" M N Description: Powerex Single Diode Modules are designed for use in applications requiring rectification and isolated
More informationPOW-R-BLOK TM Dual SCR Isolated Module 500 Amperes / Up to 1600 Volts. LD43 50 Dual SCR POW-R-BLOK TM Module 500 Amperes / Volts
mperes / Up to 16 Volts R OUTLINE DRWING B C J F 1 3 L H Q - DI. (4 TYP.) P - M1 THD (3 TYP.) T - (4 TYP.) S 4 7 5 6 E K M G D LD43 5 Dual SCR Module mperes / 8-16 Volts LD43 Outline Dimensions Dimension
More informationPOW-R-BLOK TM Dual SCR Isolated Module 250 Amperes / Up to 1600 Volts. ND43 25 Dual SCR Isolated POW-R-BLOK TM Module 250 Amperes / Up to 1600 Volts
25 mperes / Up to 16 olts G J 1 G1 G2 2 OUTLINE DRWING T - M8 THD. (3 TYP.) M U - DI. (4 TYP.) N C B S Q W Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control
More informationLDR3 Outline Dimensions. Dimension Inches Millimeters
OUTLINE DRAWING Dual SCR Module 5 Amperes / 16-18 Volts Ordering Information: Select the complete eight-digit module part number from the table below. Example: LDR3165 is a 16V, 5 Ampere Dual SCR Isolated
More informationPD POW-R-BLOK TM Dual Diode Isolated Module 1000 Amperes / Up to 4000 Volts
mperes / Up to 4 Volts Description: Powerex Dual Diode Modules are designed for use in applications requiring rectification and isolated packaging. The modules are isolated for easy mounting with other
More informationPS POW-R-BLOK TM Single Diode Isolated Module 2500 Amperes / Up to 2400 Volts
mperes / Up to 24 Volts Description: Powerex Single Diode Modules are designed for use in applications requiring rectification and isolated packaging. The modules are isolated for easy mounting with other
More informationPOW-R-BLOK TM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts CD62 15B, CD67 15B
5 mperes / Up to Volts B G "J" () OUTLINE DRWING D E F F 6 7 4 5 M "K" () R S Description: Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging.
More informationPS POW-R-BLOK TM Single Diode Isolated Module 2500 Amperes / Up to 2400 Volts
25 mperes / Up to 24 Volts Description: Powerex Single Diode Modules are designed for use in applications requiring rectification and isolated packaging. The modules are isolated for easy mounting with
More informationPOW-R-BLOK TM Dual SCR Isolated Module 150 Amperes / Up to 1600 Volts. CD63 15A Dual SCR Isolated POW-R-BLOK TM Module 150 Amperes / Up to 1600 Volts
CD63 15 15 mperes / Up to 16 B G "J" (3) OUTLINE DRWING D E F F 7 6 1 2 3 5 4 M F "K" (2) S Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated
More informationPD POW-R-BLOK TM Dual SCR Isolated Module 700 Amperes / Up to 1800 Volts
7 mperes / Up to 1 Volts Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other
More informationPA POW-R-BLOK TM AC Switch SCR Isolated Module 1550 Amps RMS, Up to 1800 Volts
P43 7 C Switch SCR Isolated Module 155 mps RMS, Up to 18 Volts Description: Powerex C Switch SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules
More informationQRD Preliminary. High Voltage Diode Module 200 Amperes/3300 Volts
QRD3324 Preliminary Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com High Voltage Diode Module 2 Amperes/33 Volts L NUTS (3TYP) F A D F C J 7 8 B E H 1 2 3 4
More informationR9S0 30XX GENERAL PURPOSE RECTIFIER DIODE
Powerex General Purpose, Low Profile Rectifier Diode designed with high blocking voltage capability and low forward voltage drop to minimize conduction losses. These are packaged in hermetic, ceramic Pow-R-Disc
More information301U(R) SERIES 300A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics
301U(R) SERIES STANDARD RECOVERY DIODES Stud Version Features Wide current range High voltage ratings up to 2500V High surge current capabilities Stud cathode and stud anode version High resistance to
More informationHigh Voltage, Input Rectifier Diode, 20 A
VS-2ETS..FPPbF Series, VS-2ETS..FP-M3 Series High Voltage, Input Rectifier Diode, 2 A FEATURES Very low forward voltage drop 2 TO-22 FULL-PAK 3 Cathode 2 3 Anode C max. operating junction temperature Designed
More information300HF(R) SERIES ELECTROSÓN 300A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2021/A. case style DO-205AB (DO-9)
Bulletin I2021/A 300HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features 300A High current carrying capability High surge current capability Types up to 1200V V RRM Stud cathode and stud anode version
More informationSAFEIR Series 10ETS12PbF
Bulletin I9 /04 SAFEIR Series 0ETSPbF INPUT RECTIFIER DIODE Lead-Free ("PbF" suffix) V F < V @ 0A I FSM = 00A Description/ Features V RRM = 00V The 0ETSPbF rectifier SAFEIR series has been optimized for
More informationMT..KB SERIES 130 A 160 A THREE PHASE BRIDGE. Power Modules. Features. Description. Major Ratings and Characteristics. Bulletin I /97
MT..KB SERIES THREE PHASE BRIDGE Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series High thermal conductivity package, electrically insulated case
More information70HF(R) SERIES 70 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics
70HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available 70 A Types
More informationSAFEIR Series 20ETS12, 20ETS12S
SAFEIR Series 0ETS, 0ETSS INPUT RECTIFIER DIODE Description/Features The 0ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation
More information95PF(R)...(W) SERIES 95 A STANDARD RECOVERY DIODES GEN II DO5. Stud Version. Features. Typical Applications. Major Ratings and Characteristics
95PF(R)...(W) SERIES STANDARD RECOVERY DIODES GEN II DO5 Stud Version Features High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version
More informationIRK. SERIES 250A 270A 320A STANDARD RECOVERY DIODES. MAGN-A-pak Power Modules. Features. Description. Major Ratings and Characteristics
Bulletin I279 rev. D 1/6 IRK. SERIES STANDARD RECOVERY DIODES Features High voltage Electrically isolated base plate 3 V RMS isolating voltage Industrial standard package Simplified mechanical designs,
More information70/300U(R) SERIES 250A 300A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics
70/300U(R) SERIES STANDARD RECOVERY DIODES Stud Version Features Alloy diode Peak reverse voltage up to 1000V Popular series for rough service Standard JEDEC types Stud cathode and stud anode version 250A
More information85HF(R) SERIES 85 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics
85HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features High surge current capability Stud cathode and stud anode version Leaded version available 85 A Types up to 1600V V RRM Typical Applications
More informationPower Rectifier Diodes (T-Modules), 2200 V, 20 A
Power Rectifier Diodes (T-Modules), 2200 V, 20 A FEATURES Electrically isolated base plate 2200 V RRM Industrial standard packaging UL approved file E78996 Simplified mechanical designs, rapid assembly
More informationIRK.91 SERIES 100 A. ADD-A-pak TM GEN V Power Modules STANDARD DIODES. Features. Benefits. Mechanical Description. Electrical Description
IRK.91 SERIES STANDARD DIODES ADDApak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 35V
More informationStandard Recovery Diodes, 400 A
VS-VSMD4AW6, VS-VSMD4CW6 Standard Recovery Diodes, 4 A PRIMARY CHARACTERISTICS I F(AV) per module 4 A Type Modules - diode, high voltage Package TO-244 Circuit configuration TO-244 Two diodes common anode,
More informationMT..KB SERIES 90 A 110 A. Power Modules THREE PHASE BRIDGE. Features. Description. Major Ratings and Characteristics. Bulletin I27501 rev.
MT..KB SERIES THREE PHASE BRIDGE Power Modules Features Package fully compatible with the industry standard INT-Apak power modules series High thermal conductivity package, electrically insulated case
More informationSD400C..C SERIES 800A. Hockey Puk Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics
SDC..C SERIES STANDARD RECOVERY DIODES Hockey Puk Version Features Wide current range High voltage ratings up to V High surge current capabilities Diffused junction Hockey Puk version Case style DO-AA
More informationSD233N/R SERIES 235A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2094 rev. B 10/06. case style B-8.
SD33N/R SERIES FAST RECOVERY DIODES Stud Version Features High power FAST recovery diode series.5 µs recovery time High voltage ratings up to 5V High current capability Optimized turn on and turn off characteristics
More informationVS-T40HF..., VS-T70HF..., VS-T85HF..., VS-T110HF... Series Power Rectifiers Diodes (T-Modules), 40 A to 110 A
Power Rectifiers Diodes (T-Modules), A to A FEATURES Electrically isolated base plate D-55 (T-module) Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly High surge
More informationMT..KPbF SERIES 130 A 160 A THREE PHASE BRIDGE. Power Modules. Features. Description. Major Ratings and Characteristics. Bulletin I /06
MT..KPbF SERIES THREE PHASE BRIDGE Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series High thermal conductivity package, electrically insulated case
More informationSCR/GTO/Diode POW-R-BLOK Modules Ratings and Characteristics. 1.3 The Device Data Sheet
1.3 The Device Data Sheet The proper application of power semiconductors requires an understanding of their maximum ratings and electrical characteristics, information which is presented within the device
More informationST300S SERIES 300A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25158 rev. B 01/94. case style TO-209AE (TO-118)
ST300S SERIES PHASE CONTROL THYRISTORS Stud Version Features Center amplifying gate Hermetic metal case with ceramic insulator International standard case TO-209AE (TO-118) Threaded studs UNF 3/4-16UNF2A
More informationStandard Recovery Diodes, (Stud Version), 200 A
VS- Standard Recovery Diodes, (Stud Version), 200 A DO-30 (DO-205AC) PRIMARY CHARACTERISTICS I F(AV) 200 A Package DO-30 (DO-205AC) Circuit configuration Single FEATURES Wide current range High voltage
More informationMT SERIES 25 A 35 A. Features. Description. Major Ratings and Characteristics. Bulletin I2771 rev. G 09/ Parameters 26MT 36MT Units
MT SERIES THREE PHASE BRIDGE Power Modules Features Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent
More informationVS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. ADD-A-PAK Gen 7 Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. ADD-A-PAK Gen 7 Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) A Type Modules - Diode, High Voltage Package ADD-A-PAK Gen 7 Circuit ADD-A-PAK Two
More informationIRK.105 SERIES 105 A. THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR. ADD-A-pak TM GEN V Power Modules. Features. Benefits. Mechanical Description
IRK.15 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate
More informationStandard Recovery Diodes (Stud Version), 12 A
Standard Recovery Diodes (Stud Version), 12 A VS- FEATURES High surge current capability Stud cathode and stud anode version Wide current range DO-203AA (DO-4) Types up to 1200 V V RRM Designed and qualified
More informationQID Dual IGBT HVIGBT Module 85 Amperes/6500 Volts
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Dual IGBT HVIGBT Module Description: Powerex HVIGBTs feature highly insulating housings that offer enhanced protection
More informationV (4TYP) U (5TYP) V 0.28 Dia. 7.0 Dia.
QIC68 Preliminary Powerex, Inc., 73 Pavilion Lane, Youngwood, Pennsylvania 697 (724) 9-7272 www.pwrx.com Dual Common Emitter HVIGBT Module 8 Amperes/6 Volts S NUTS (3TYP) F A D F J (2TYP) C N 7 8 H B E
More informationStandard Recovery Diodes, (Stud Version), 400 A
Standard Recovery Diodes, (Stud Version), 400 A DO-9 (DO-205AB) PRIMARY CHARACTERISTICS I F(AV) 400 A Package DO-9 (DO-205AB) Circuit configuration Single FEATURES Wide current range High voltage ratings
More informationStandard Diodes (Super MAGN-A-PAK Power Modules), 600 A
Standard Diodes (Super MAGN-A-PAK Power Modules), 6 A FEATURES High current capability High surge capability High voltage ratings up to 2 V 3 V RMS isolating voltage with non-toxic substrate Industrial
More informationStandard Recovery Diodes (Stud Version), 300 A
Standard Recovery Diodes (Stud Version), 300 A DO-205AB (DO-9) PRODUCT SUMMARY I F(AV) 300 A Package DO-205AB (DO-9) Circuit configuration Single diode FEATURES Alloy diode Popular series for rough service
More informationIRKU/V41, 56 SERIES 45 A 60 A. ADD-A-pak TM GEN V Power Modules THYRISTOR/ THYRISTOR. Features. Benefits. Mechanical Description
Bulletin I2734 rev. E /2 IRKU/V4, 56 SERIES THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper
More informationCM600YE2N-12F / CM600YE2P-12F TLI-Series (Three Level Inverter) IGBT 600 Amperes/600 Volts
CM6YN-12F / CM6YP-12F TLI-Series (Three Level Inverter) IGBT P V Q W Q V R P S J Y, Z U (2 PLACES) L ( PLACES) M N K (3 PLACES) Y, Z G F E B CM6YN-12F D A X T C Outline Drawing and Circuit Diagram RTC
More informationInput Rectifier Diode, 80 A
Input Rectifier Diode, 8 A 8EPS16 High Voltage Series Vishay High Power Products TO-247AC PRODUCT SUMMARY V F at 8 A I FSM V RRM Base cathode 4, 2 1 3 Anode Anode 1.17 V 145 A 16 V DESCRIPTION/FEATURES
More informationVS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series Standard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(AV) 85 A Package
More informationStandard Rectifier Module
Standard Module 3~ M = 6 I = 45 A DA FSM = 3 I A 3~ Bridge Part number - ~ ~ ~ + Features / Advantages: Applications: Package: FO-F-B Package with DCB ceramic educed weight Improved temperature and power
More informationInput Rectifier Diode, 60 A
Input Rectifier Diode, 6 A Vishay High Power Products TO-247AC modified PRODUCT SUMMARY V F at 6 A I FSM V RRM Base common cathode 2 3 Anode Anode 2.9 V 95 A 8/2 V DESCRIPTION/FEATURES The 6EPS.. rectifier
More informationStandard Recovery Diodes, Generation 2 DO-5 (DO-203AB) (Stud Version), 80 A
Standard Recovery Diodes, Generation 2 DO-5 (DO-203AB) (Stud Version), 80 A 80PF(R)... DO-5 (DO-203AB) 80PF(R)...W DO-5 (DO-203AB) FEATURES High surge current capability Designed for a wide range of applications
More informationStandard Recovery Diodes (Stud Version), 400 A
Standard Recovery Diodes (Stud Version), 400 A DO-205AB (DO-9) FEATURES Wide current range High surge current capabilities Stud cathode and stud anode version Standard JEDEC types Designed and qualified
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Diffused diode High voltage ratings up to
More informationVS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) Type ADD-A-PAK A Modules - Diode, High Voltage MECHANICAL DESCRIPTION
More informationHigh Voltage, Input Rectifier Diode, 20 A
VS-2ETS8FP-M3, VS-2ETS2FP-M3 High Voltage, Input Rectifier Diode, 2 A 2 2L TO-22 FullPAK PRIMARY CHARACTERISTICS Cathode 2 Anode I F(AV) 2 A V R 8 V, 2 V V F at I F. V I FSM 3 A T J max. C Package 2L TO-22
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
More informationPower Rectifier Diodes (T-Modules), 40 A to 110 A
THF..., THF..., T85HF..., T1HF... Series (T-Modules), A to 1 A FEATURES Electrically isolated base plate D-55 Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly
More informationTCS4 340H Phase Control Thyristor
TCS4 340H The TCS4 is a high voltage, high current disc pack SCR employing a high di/dt gate structure. This gate design allows the SCR to be reliably operated at high di/dt and dv/dt conditions in various
More informationInput Rectifier Diode, 10 A
Input Rectifier Diode, A ETS..S High Voltage Series Vishay High Power Products Base cathode 1 3 D PAK Anode Anode PRODUCT SUMMARY V F at A < 1 V I FSM A V RRM 8/1 V DESCRIPTION/FEATURES The ETS..S rectifier
More informationMT..KB SERIES 50 A 90 A 100 A. Power Modules THREE PHASE AC SWITCH. Features. Description. Major Ratings and Characteristics. Bulletin I /97
MT..KB SERIES THREE PHASE AC SWITCH Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series High thermal conductivity package, electrically insulated case
More informationStandard Recovery Diodes Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A
VS-95PF(R)...(W) High Voltage Series Standard Recovery Diodes Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A 95PF(R)... DO-5 (DO-203AB) 95PF(R)...W DO-5 (DO-203AB) FEATURES High surge current capability
More informationThyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A
VS- Thyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A FEATURES High current capability High surge capability Industrial standard package 3000 V RMS isolating voltage with non-toxic substrate Designed
More informationT Phase Control Thyristor
The T820 is a high current disc pack SCR employing a high di/dt gate structure. This gate design allows the SCR to be reliably operated at high di/dt and dv/dt conditions in various phase control applications.
More information40HF(R) SERIES 40 A STANDARD RECOVERY DIODES. Stud Version. Features. Typical Applications. Major Ratings and Characteristics
HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available A Types
More informationStandard Recovery Diodes, (Stud Version), 300 A
Standard Recovery Diodes, (Stud Version), 300 A DO-9 (DO-205AB) PRIMARY CHARACTERISTICS I F(AV) 300 A Package DO-9 (DO-205AB) Circuit configuration Single FEATURES Wide current range High voltage rating
More informationStandard Recovery Diodes, (Stud Version), 85 A
Vishay High Power Products Standard Recovery Diodes, FEATURES High surge current capability Stud cathode and stud anode version Leaded version available RoHS COMPLIANT PRODUCT SUMMARY I F(AV) DO-3AB (DO-5)
More informationST180S SERIES 200A. Stud Version PHASE CONTROL THYRISTORS. Features. Typical Applications. Major Ratings and Characteristics
ST180S SERIES PHASE CONTROL THYRISTORS Stud Version Features Center amplifying gate Hermetic metal case with ceramic insulator (Also available with glass-metal seal up to 1200V) International standard
More informationHigh Voltage, Input Rectifier Diode, 10 A
VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series High Voltage, Input Rectifier Diode, A TO-22 FULL-PAK PRODUCT SUMMARY Base cathode 3 Cathode Anode Package TO-22FP I F(AV) A V R 8 V to 2 V V F at I F. V I FSM
More informationP Q SIGNAL TERMINAL 1 F O (L) 5 F O (H) V S DETAIL "A"
MIG4J2CSB1W Powerex, Inc., 2 E. Hillis Street, Youngwood, Pennsylvania 15697-18 (724) 925-7272 Compact IPM Series Dual Module 4 Amperes/6 Volts J A D K N P Q E W E2 C1 C S F B C2E1 E DETAIL "A" R T U H
More informationL M DETAIL "A" SIGNAL TERMINAL 3 E(L) 4 V D 5 G(H) 6 F O (H) 7 E(H) 8 OPEN
MG3QYSA Powerex, Inc., E. Hillis Street, Youngwood, Pennsylvania 1597-1 (7) 95-77 Compact IGBT Series Module 3 Amperes/1 Volts J A D K L M N W V E C1 C DETAIL "A" H B F E CE1 U W Outline Drawing and Circuit
More informationValue Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C)
MAIN FEATURES: DIODE / SCR MODULE Symbol Value Unit I T(RMS) 50-70-85 A V DRM /V RRM 800 and 1200 V I GT 50 and 100 ma DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge
More informationL M DETAIL "A" SIGNAL TERMINAL 3 E(L) 4 V D 5 G(H) 6 F O (H) 7 E(H) 8 OPEN
MGQYSA Powerex, Inc., E. Hillis Street, Youngwood, Pennsylvania 1597-1 (7) 95-77 Compact IGBT Series Module Amperes/1 Volts J A D K L M N W V E C1 C DETAIL "A" H B F E CE1 U W Outline Drawing and Circuit
More informationFast Recovery Diodes (Stud Version), 40 A, 70 A, 85 A
VS-4HFL, VS-7HFL, VS-85HFL Series Fast Recovery Diodes (Stud Version), 4 A, 7 A, 85 A FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities Stud cathode
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 80 A
VS-80PF(R)...(W) High Voltage Series Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 80 A 80PF(R)... 80PF(R)...W DO-5 (DO-203AB) DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(AV) 80 A Package
More informationPower Modules, Passivated Assembled Circuit Elements, 40 A
Power Modules, Passivated Assembled Circuit Elements, 4 A FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS I O 4 A Type
More informationInsulated Single Phase Hyperfast Bridge (Power Modules), 60 A
Insulated Single Phase Hyperfast Bridge (Power Modules), 6 A SOT-227 PRIMARY CHARACTERISTICS V RRM 65 V I O at T C = 123 C 6 A t rr 63 ns Type Modules - Bridge, Hyperfast Package SOT-227 Circuit configuration
More informationCP10TD1-24A. DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 10 Amperes/1200 Volts
CP1TD1-24A Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 1697-18 (724) 92-7272 1 Amperes/12 Volts Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 2.68±.1 68.±.3 B 1.73±.2
More informationMB & JB SERIES 10 A 25 A 35 A. Features. Description. Major Ratings and Characteristics. Bulletin I2715 rev. E 08/97.
MB & JB SERIES SINGLE PHASE BRIDGE Power Modules Features Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case A 25 A 35 A enter hole
More informationPhase Control SCR, 70 A
Phase Control SCR, 70 A 70TPS..PbF High oltage Series ishay High Power Products 2 (A) DESCRIPTION/FEATURES The 70TPS..PbF High oltage Series of silicon controlled rectifiers are specifically designed for
More informationL M 1 F O (L) 5 F O (H) DETAIL "A"
MIG6J2CMB1W Powerex, Inc., 2 E. Hillis Street, Youngwood, Pennsylvania 15697-18 (724) 925-7272 Compact IPM Series Dual Module 6 Amperes/6 Volts J A D K L M N W V E2 C1 C DETAIL "A" H B F E C2E1 U W DD
More informationCP15TD1-24A. DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 15 Amperes/1200 Volts
Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 2.68±.1 68.±.3 B 1.73±.2 44.±.5 C.58±.4 14.7±.1 D 3.1±.2 79.±.5 E 2.83 72. F.16±.1 4.±.3 G 2.83±.1 72.±.3 H.7 2. J.2±.8 5.±.2 K.87 22.
More informationPower Modules, Passivated Assembled Circuit Elements, 25 A
Power Modules, Passivated Assembled Circuit Elements, 25 A VS-P Series FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS
More informationD AB Z DETAIL "B" DETAIL "A"
QJD1211 Preliminary Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Split Dual SiC MOSFET Module 1 Amperes/12 Volts Y A AA F D AB Z AC Q DETAIL "B" Q P Q U B
More informationStandard Rectifier Module
Standard ectifier Module 3~ ectifier M = 1400 I = 60 A DA FSM = 550 I A 3~ ectifier Bridge Part number - ~ ~ ~ + Features / Advantages: Applications: Package: PWS-D Package with DCB ceramic Improved temperature
More informationS R V U T DETAIL "A" AF AE E1C2 (33) E1C2 (32) Dimensions Inches Millimeters
CM6DXL-24S Powerex, Inc., 73 Pavilion Lane, Youngwood, Pennsylvania 5697 (724) 925-7272 www.pwrx.com Dual IGBTMOD NX-S Series Module D AC K E AB L F R Y Z AA Z AD G H C() C(2) E2(3) E2(4) A B C J K L D
More informationStandard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available Types up to 400 V V RRM Designed and qualified for industrial
More informationMT..KB SERIES 60 A 70 A. Power Modules THREE PHASE BRIDGE. Features. Description. Major Ratings and Characteristics. Bulletin I27500 rev.
MT..KB SERIES THREE PHASE BRIDGE Power Modules Features Package fully compatible with the industry standard INT-Apak power modules series High thermal conductivity package, electrically insulated case
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(A) 40 A
More information50RIA SERIES 50 A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2401 rev. A 07/00. Case Style TO-208AC (TO-65)
50RIA SERIES MEDIUM POWER THYRISTORS Stud Version Features High current rating Excellent dynamic characteristics dv/dt = 0V/µs option Superior surge capabilities Standard package Metric threads version
More informationPhase Control Thyristors (Stud Version), 300 A
Phase Control Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A 400 V, 800 V, 1200 V, 1600 V, V DRM /V RRM 1800 V, 2000 V V TM 1.28 V I GT 200 ma T J -40 C to +125
More informationStandard Recovery Diodes (Stud Version), 70 A
Standard Recovery Diodes (Stud Version), 70 A VS- FEATURES High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available DO-203AB
More informationStandard Recovery Diodes, (Hockey PUK Version), 800 A
Standard Recovery Diodes, (Hockey PUK Version), 8 A VS- A-PUK (DO-AA) PRIMARY CHARACTERISTICS I F(AV) 8 A Package A-PUK (DO-AA) Circuit configuration Single FEATURES Wide current range High voltage ratings
More informationIR Series 25TTS..FP PHASE CONTROL SCR TO-220 FULLPAK V T I TSM V RRM. 800 to 1600V < 16A = 300A. Bulletin I2135 rev.
IR Series 25TTS..FP PHASE CONTROL SCR TO-220 FULLPAK Description/Features The 25TTS..FP IR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control
More informationFast Recovery Diodes (Stud Version), 6 A, 12 A, 16 A
VS-6FL(R), VS-2FL(R), VS-6FL(R) Series Fast Recovery Diodes (Stud Version), 6 A, 2 A, 6 A DO-23AA (DO-4) FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities
More informationThree Phase Bridge, 300 A (Power Modules)
MTC Three Phase Bridge, 300 A (Power Modules) S-300MT...C Series FEATURES Blocking voltage up to 1800 High surge capability High thermal conductivity package, electrically insulated case Excellent power
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
More informationThree Phase Bridge (Power Modules), 25/35 A
26MT/ D-34A FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E359 approved
More informationT9G Phase Control Thyristor
The T9G0 SCR employs a Center Fired amplifying gate structure which allows the SCR to be reliably operated at high di/dt and high dv/dt conditions in phase control applications. FEATURES: Low On-State
More informationT9S0 Phase Control Thyristor
The T9S0 SCR employs a Center Fired amplifying gate structure which allows the SCR to be reliably operated at high di/dt and high dv/dt conditions in phase control applications. FEATURES: Low On-State
More informationFast Soft Recovery Rectifier Diode, 60 A
6EPF.. Base common cathode 2 1 3 Cathode Anode TO-247AC modified PRODUCT SUMMARY V F at 3 A t rr V RRM Anode 1 6CPF.. Base common cathode 2, 4 TO-247AC Anode 3 < 1.2 V 95 ns V/1 V FEATURES/DESCRIPTION
More information