LED Full Cutoff Wallpack

Transcription

1 ASD Full-cutoff wallpacks offer controlled light output for general-purpose area and security lighting. Dark-sky compliant. Ideal replacement for up to 250-watt HID fixtures. Die-cast aluminum housing with dark bronze finish. Mounts to junction box or directly to wall. Full-cutoff ED wall pack is a perfect replacement for traditional outdoor wall packs. FEATURES AD BEEFITS: Replaces up to 250 Watt Metal Halide Fixture is full cutoff version (no uplight) Impact-resistant polycarbonate optical lens o maintenance Operating temperature of -40 to 104 Wet location IP65-70 ife >,000 hrs cuus certified Designights Consortium (DC) listed (Classification: Standard) 5 Year warranty 110 lm w HIH UMIOUS EFFICIECY ORDERI MATRIX: Family Modification Watts Dimmable 0~10 V / CCT ASD-WP 03 XX X 50 ED Full Cutоff Wallpack 50 = 50 W = on-dimmable 5,000 K 80 = 80 W D = Dimmable ED FU CUTOFF WAPACK: Model Watts Dimming Compatible CCT umens Dimensions (xwxh) ASD-WP o 5,000 K 5,798 lm 14"x 9 1/4"x 8 1/4" ASD-WP03-80D50 80 Yes 5,000 K 9,128 lm 14"x 9 1/4"x 8 1/4"

2 PRODUCT SPECIFICATIOS: Construction & Materials ens PC Reflector Aluminum Housing Aluminum Finish Bronze Weight ASD-WP lb (2.48 kg) ASD-WP03-80D lb (2.8 kg) Environmental System Work Environment Suitable for Wet ocations, IP65 Operating Temperature -40 to 104 (-40 to 40 ) -70 ife >,000 hrs Optical System uminous Flux ASD-WP ,798 lm ASD-WP03-80D50 9,128 lm Color Temperature 5,000 K CRI >80 Electrical System Input Voltage 100~277V AC 50/ Hz Max input current ASD-WP A ASD-WP03-80D A Off State Power 0 W Power Consumption ASD-WP W ASD-WP03-80D50 80 W Power Factor 0.9 Output voltage ASD-WP V ASD-WP03-80D50 40 V Max output current ASD-WP ma ASD-WP03-80D A - 3 A Warranty & Certifications 5-year limited warranty Designights Consortium (DC) listed cuus certified E473804

3 FU CUTOFF WAPACK ORDERI IFORMATIO: Model Watts CCT UPC Product Code Pcs in one Carton Carton Size Carton Weight ASD-WP ,000 K "x8.66"x9.64" 6.16 lbs ASD-WP03-80D ,000 K "x8.66"x9.64" 6.82 lbs 50 W, 80 W 9.3 (235 mm) 14.3 (363.5 mm) 8.3 (210.2 mm) ASD-WP ASD-WP03-80D50 IHT DISTRIBUTIO CURVE UIT:CD MH(m) 0m C0 PAE ISOUX DIARAM (UIT:lx) IHT DISTRIBUTIO CURVE UIT:CD MH(m) 0m C0 PAE ISOUX DIARAM (UIT:lx) m m C0-C180 C-C270 Mounting Height: 10.0m Max ux(100%): 17.1 lx ( 1%): 0.2 lx ( 2%): 0.3 lx ( 5%): 0.9 lx ( 10%): 1.7 lx ( 20%): 3.4 lx ( 50%): 8.5 lx (100%): 17.1 lx C0-C180 C-C270 Mounting Height: 10.0m Max ux(100%): 25.2 lx ( 1%): 0.3 lx ( 2%): 0.5 lx ( 5%): 1.3 lx ( 10%): 2.5 lx ( 20%): 5.0 lx ( 50%): 12.6 lx (100%): 25.2 lx

4 WARI RISK OF PERSOA IJURY READ and follow all WARIS and installation instructions. Keep or give to the owner for future reference. Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product. Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Risk of Fire: Minimum С supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. ASD assumes no responsibility for claims arising out of improper or careless Installation or handling of this product. AVERTISSEMET RISQUE DE BESSURES - isez et suivez toutes les MISES E ARDE et les instructions d installation. Tenir ou fournir au propriétaire pour référence future. Risque de coupures: Porter des gants pour éviter les coupures ou des écorchures lors du retrait du carton, de la manutention, l installation et le maintien de ce produit. Risque de choc électrique: Ce produit doit être Installé conformément au code d installation applicable par une personne familiarisée avec la construction et l exploitation du produit et les risques impliqués. Risque d incendie: minimum С Alimentation conducteurs. Consultez un électricien qualifié pour assurer le bon conducteur de circuit de dérivation. ASD n assume aucune responsabilité pour les réclamations découlant d une installation inadéquate ou négligente ou de la manipulation de ce produit. ADVERTECIA RIESO DE ESIOES PERSOAES ea y siga todas las advertencias e instrucciones de instalación. Mantener о proporcionar al propletario para referencia futura. Riesgo de cortes: Use guantes para evitar cortes о abrasiones en la eliminación de la caja, manejo, instalación y mantenimlento de este producto. Riesgo de choque eléctrico. Este pfoducto debe ser instalado de acuerdo con el código de Instalación uplicable en que una persona familliarizada con la construcciôn y operación del producto y los riesgos Involucrados. Riesgo de Incendio: Minimo С los conductores de suministro. Consuite a un etectricista calificado para asegurarse el conductor correcto del circuito. ASD no asume ninguna responsabilidad por reclamaciones derivadas de uno instaiación inadecuada о negfigente о la manipuloción de este producto.

5 ISTAATIO UIDE IMPORTAT SAFETY IFORMATIO: Please read all the instructions below before installation. Make sure that the supply voltage corresponds to the rated product voltage. The product must be installed by a qualified electrician in accordance with the ational Electrical Code and corresponding local codes. If the product is damaged, do not use it. All wiring connections should be capped with U approved wire connectors. This fixture is intended to be connected to a properly installed and grounded U listed junction box with suitable strain relief means for power cord. The junction box is not included, should be purchased separately. ISTAATIO STEPS 1. Use a screwdriver to loosen (2) screws securing fixture door and open it Mounts to junction box or directly to wall. 2.1 Take care to avoid damaging driver, wires and quick connectors and drill holes through castings over fixture. Hang the fixture on the back plate. Connect wires into wiring terminal; white wire to eutral terminal, black wire to ive terminal, green wire to round terminal; and fix them by screws connect the ground wire to the back plate (1.5 mm) 6.5 (167.5 mm) 2.2 Replace one of the side caps, insert power cord into fixture and connect the wires as shown on picture 2.2. Refer to size of the diagram to bore the holes on the wall Close fixture and tighten the 2 screws removed in installation step 1. COECTIO DIARAM DIMMABE FIXTURE COECTIO DIARAM O-DIMMABE FIXTURE Power connector ~277V 50/ Hz (live/hot) connect black (neutral) connect white round connect green DRIVER Dim + (Violet) Dim - (ray) Power connector ~277V 50/ Hz (live/hot) connect black (neutral) connect white round connect green DRIVER