LED Linear Light 1200 mm 40W PRODUCT DATA SHEET

Transcription

1 LED Linear Light 1200 mm 40W PRODUCT DATA SHEET

2 1. Product introduction The 40 W Dimmable LED Linear Light is a new addition to the Comus LED range. The 40W version is part of the new LED Linear Light High Bay range that comprises of: 20, 40 and 50W fixtures, either as single or chain configuration. Also upon request a square version is available with up to 6 modules installed in parallel. Narrow (60 ) or wide (90 ) options for the optical system are also available in order to provide complete flexibility in the design. The LED chips from Samsung represent a high efficient light source making the luminous efficacy of one fitting reaching 125 lm/w. The power supply used has a high efficiency, high PF power supply control system which equipped with PWM technology to ensure smooth dimming. Additional features are detection and daylight sensors, emergency function and DALI, available upon request. Areas of application: Factories; Production halls; Warehouses; Ships; Airports; Subways; Commercial sites; Panorama lighting; Gymnasiums; Supermarkets; Overpasses. Features: Energy efficient; Easy installation; Two options available for the optical design: narrow or wide beam angle (60 and 90 ); Modular design with plug and play system; ENEC approved power supply with two options: dimmable or nondimmable; High quality Samsung LED chips; 4 Years warranty. Benefits: Long service life: h; High system luminous efficacy of 120 lm/w; High power factor > 0.9; Reduced maintenance costs; Coolrunning; Good CRI over 80Ra; 110V/PWM/Resistance 3 in 1 dimming; Different colour temperature options available: 3000/4000/5000/5700/6500K; Instant on no flicker or hum.

3 2. Product components: 2.1 LED CHIP Samsung LM561B 5630 Middle Power LED Features of the LED Chip: Beam Angle: 120 Precondition: JEDEC Level 2a Dimension: 5.6 x 3.0 x 0.8 mm ESD withstand voltage: up to /+ 5 kv [HBM] Absolute maximum rating Item Symbol Rating Condition Operating temperature range Top 40 C +85 C LED junction temperature range TJ 110 C Forward Current IF 150 ma Peak Pulsed Forward Current IFP 300 ma Duty 1/10 pulse width 10ms ESD 0 5kV HBM Electrooptical characteristics (Ts = 25 C) Item Unit Nominal CCT Rank Min Max Forward Voltage (VF) (@65 ma) V WA AZ A A A A Luminous Flux * (Φv) (@65 ma) Lm 5700K (R) S Reverse voltage (@5 ma) V Colour rendering index* (Ra) 5 80 Thermal resistance (Rth, js) C /W 16 * Samsung Electronics maints a tolerance of VF: +/ 0.1V, ΦV: +/ 5%, Ra: +/ 3.0, R9: +/ 6.5 on measurements

4 Figure 2.1 Spectrum distribution Figure 2.2 Relative Luminous Flux vs. Forward Current (Tj = 25 C) Figure 2.3 Forward Current vs. Forward Voltage (Tj = 25 C) 2.2 Comus LED Driver Specifications: Lifespan: >= h; Device losses: 5.2 W; Output voltage (DC): 33 V; Output current (DC): 1050 ma; Output power: 34.8 W; ECG efficiency: 87 %;

5 Dimmable: Yes; Inrush current: < 50 A; Galvanic isolation primary/secondary: > 10 MΩ; Surge capability (L/NGround): /; Surge capability (LN): 1 kv; Length: 195 mm; Width: 42 mm; Height: 32 mm; Weight: 0.3 Kg; Casing material: PC; Overheating protection: No; Overload protection: Yes; Shortcircuit protection: Yes; Noload proof: Yes. 3. Electrical and Photometrical data of Linear Light Electrical parameters Parameter Measurement Unit Min Average Max Mains voltage V (ac) Mains current (at 220 V) ma 300 Operating frequency Hz System wattage W 40 PF 0.9 THD % <20 Photometrical parameters Testing condition: 25 C temperature Type of reflector Parameter Measurement unit Average Average Luminous flux lm 5000 Illuminance Area 1m lx m lx m lx m lx

6 8 m lx m lx m lx Colour Temperature K 5700 CRI Ra 83 General parameters Parameter Measurement Unit Min Average Max Working temperature C Relative humidity % 0 85 Storage temperature C Photometrical report and graphs Figure 4.1 Luminous intensity distribution (with 60 and 90 reflector) Figure 4.2 Lux distance curve (with 60 and 90 reflector)

7 Figure 4.3 ISO Intensity (VH) (with 60 and 90 reflector) Figure 4.4 ISO candela diagram on circular web (with 60 and 90 reflector) Figure 4.5 ISO illuminance diagram (with 60 and 90 reflector)

8 Figure 4.6 Luminance limiting curve (with 60 and 90 reflector) Luminance table With 60 reflector γ C C C With 90 reflector γ C C C Glare table With 60 and 90 reflector Glare Quality Service Values Illuminance (lx) 1.15 A <= B <= C <= D <= E <=300 a b c d e g g h

9 5. Product dimensions Figure 5.1 LED Linear Light dimensions Model number Lenght [mm] Width with reflector [mm] Widthwithout reflector [mm] Height [mm] LEDLH Model number Figure 5.2 LED Linear Light dimensions including the mechanical connector Lenght [mm] Width with reflector [mm] Widthwithout reflector [mm] Height [mm] LEDLH Installation Figure 6.1 Product configuration: with and without reflector

10 Me th od of installation Su sp end e d 1. Single fitting Figure 6.1 Linear Light LED single configuration In order to ensure proper installation please follow the steps described below: 1. Install the suspended chain and mount the clip on the chain; 2. Open the end caps using a screw driver and insert the reflector; 3. Fix and secure the module using the mounting clips; 4. Connect the wires and the dimmer and then switch on the fixture for test. Figure 6.2 Linear Light LED single suspension

11 2. Chain connection In order to ensure proper installation please follow the steps described below: 1. Open the end caps using a screw driver and insert the reflector; 2.A Remove the end caps at each side when you install the modules in a chain configuration; 2.B Connect the internal electrical terminals (male and female connectors); 3. Achieve mechanical connection using the screws and connection plates available; 4. On the last module of the chain some wiring needs to be done as presented in the electrical wiring diagram. After completion repeat step 3 and power on fixture in order to test. Figure 6.3 Linear Light LED chain suspension Figure 6.4 Linear Light LED chain configuration

12 In order to improve our customer's experience we have added an upgrade to ensure a more convenient and easy installation: The mechanical plate is upgraded and fixed inside the line light; The electrical connector is placed on the mechanical plate; The user only needs to can connect the connectors by hand, the fix them using 2 screws for a connection between 2 modules of Linear Lights. Figure 6.5 Linear Light LED chain configuration additional upgrade 3. Square highbay As can be seen from the figure below the square configuration can be obtained by using up to 6 modules. Figure 6.6 Linear Light LED square configuration

13 Me th od of installation 2 Ce illing Mou n te d 7. Optional functions available Figure 6.7 Linear Light LED ceiling mounting Additional function can be added to the LED Linear Light upon request, as below: Infrared sensor for additional energy savings based on movement detection Note: One sensor can control up to 10 modules of Linear Lights Emergency function backup for key fixtures 110V/PWM/Resistance 3 in 1 dimming

14 Daylight harvesting for additional energy savings Note: One sensor can control up to 10 modules of Linear Lights Digital Addressable Lighting Interface Figure 7.1 DALI wiring diagram for LED Linear Light

15 8. Packaging Packaging information Model Net weight (per piece) [kg] Carton size [cm] Overall weight G.W [kg] LEDLH pcs/carton x 24.5 x LEDLH pcs/carton x 38.0 x Figure 8.1 LED Linear Light packaging