Technical Application Guide for UP-SHINE LED Downlight UP-DL W-P3

Transcription

1 Technical Application Guide for UP-SHINE LED Downlight UP-DL97-3-1W-P3

2 Introduction Slide switch for color selection CW NW WW Up-shine SMD LED Down light adopts high lumen SMD LED, PC diffuser with even light output. White, silver, chrome surface treatment are available for customer s preference. Triac dimmable, -1V dimmable and DALI dimmable version share great popularity by excellent dimming effect. Up to 7% energy saving compared to standard CFL Long lifetime of 5, hours Dimmable when using triac dimmer 9 wide beam angle Ø9-95mm cutout CCT: 3K-4K-57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP54 for indoor use Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate

3 Product Information Ø11 88 Technical Specifications 38 Model Voltage Power Fixture Compatibility Rated Wattage Electrical Classification Power Factor Lumen (±5%) Ingress Protection Beam angle CCT Lifespan CRI Dimmable Dimension UP-DL97-3-1W-C3 AC23V 1W K 5h 8 No UP-DL97-3-1W-C3 AC23V 1W K 5h 8 No UP-DL97-3-1W-C3 AC23V 1W K 5h 8 No UP-DL97-3-1W-P3 AC23V 1W K 5h 8 Yes UP-DL97-3-1W-P3 AC23V 1W K 5h 8 Yes UP-DL97-3-1W-P3 AC23V 1W K 5h 8 Yes Driver data Sheet Driver data DIM Non dim Input rated Voltage AC23V AC23V Frequency 5Hz 5/6Hz Input Voltage AC2-24V AC2-24V Efficiency 8% 84% Total load Wattage 1W±1W 1W±1W Power Factor.9.9 Rated input current.6a.6a Full load output Voltage DC23-4V DC25-42V Rated output current 23mA 23mA Output current range 23mA±5% 23mA±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 8%-1% Dimmer Triac dimmers Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS THD 18% 18% Withstand voltage AC375V AC375V Operating Temp Operating Humidity Storage Temp 1W Ⅱ IP54-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution 3K 4K Max=5126 [1.=2] 1.8 SDCM F3K Max=5495 [1.=2] 5.71 SDCM F4K Spectrum.5.3 x=434 y=65 Spectrum.5.3 x=.3682 y= Wavelength(nm) Wavelength(nm) 57K.7.6 Max=5918 [1.=2] 5.94 SDCM F57K Spectrum.5.3 x=.332 y= Wavelength(nm) Photometric Diagram 3K 4K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram Flux out: lm Flux out: lm / E(LX) Planar Illuminance Curve MH=1m C/18 C9/ / E(LX) Planar Illuminance Curve MH=1m C/18 C9/ AVERAGE BEAM ANGLE(5%): 95.6 DEG Distance(m) Height Eavg, Emax Angle: 95.23deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance. AVERAGE BEAM ANGLE(5%): 95.6 DEG Distance(m) Height Eavg, Emax Angle: 95.6deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance. 57K Polar intensity diagram Cartesian intensity diagram Beam diagram Flux out: lm -/+18 Planar Illuminance Curve E(LX) MH=1m C/18 C9/ AVERAGE BEAM ANGLE(5%): 95.6 DEG Distance(m) Height Eavg, Emax Angle: 95.69deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

5 Polar Diagram Comparison -15 O -/+18 O 15 O -12 O 12 O -9 O 9 O -6 O O -3 O 3 O O AVERAGE BEAM ANGLE (5%): 95.6DEG C/18, 95.7 deg C3/21, 95.5 deg C6/24, 95.5 deg C9/27, 95.8 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C 8 Temperature ( o C) :37:46 19:7:44 19:37:44 2:7:44 2:37:44 21:7:44 21:37:44 22:7:44 23:7:44 23:37:44 :7:44 :37:44 1:7:44 1:37:44 2:7:44 2:37:44 3:7:44 3:37:44 4:7:44 4:37:44 5:7:44 5:37:44 6:7:44 6:37:44 7:7:44 7:37:44 8:7:44 8:37:44 9:7:44 Time The driver lifespan is based on capacitor working temperature. IC Capacitor MOS PCB LED Fitting Environmental temperature

6 Installation For the product with Slide Switch of Color Selection, please select the light color (CW/NW/WW) before installation. Slide switch for color selection 1. Open a hole according to the cutout size of led downlight. 2. Use screw-driver to open the driver terminal cover, feed the main AC wire L. N. in terminal block respectively, then fix the cover back. 3. Connect the downlight with driver, hold back the spring clip then push the downlight into the hole. 4. Make sure the downlight fixed tightly in ceiling, turn on the power (Fig 1). Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 48.5*37* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China